The total internal energy in the container is 329.77 Btu and the enthalpy in the container is 385.14 Btu.
Using the steam tables, we can determine the specific volume of water at the given pressure and temperature. The specific volume of water is 0.01658 [tex]ft^3/lbm[/tex].
The mass of water in the container is 0.92 lbm, so the total volume of the water is:
V = m/v = 0.92 lbm / 0.01658 [tex]ft^3/lbm[/tex] = [tex]55.539 ft^3[/tex]
Assuming the water is at saturation, we can find the total internal energy and enthalpy by using the values in the steam tables for saturated water at 100 psia.
From the steam tables, the total internal energy of saturated water at 100 psia is 358.05 Btu/lbm, so the total internal energy in the container is:
U = m * u = 0.92 lbm * 358.05 Btu/lbm = 329.77 Btu
From the steam tables, the enthalpy of saturated water at 100 psia is 419.02 Btu/lbm, so the enthalpy in the container is:
H = m * h = 0.92 lbm * 419.02 Btu/lbm = 385.14 Btu
Therefore, the total internal energy in the container is 329.77 Btu and the enthalpy in the container is 385.14 Btu.
Learn more about enthalpy :
https://brainly.com/question/13996238
#SPJ4
true or false: a sugar is classified as a d isomer if the hydroxyl group is on the right of the carbon farthest from the carbonyl group
False. A sugar is classified as a D isomer if the hydroxyl group on its penultimate carbon (the second to last carbon) is oriented to the right in its Fischer projection.
In a Fischer projection, the horizontal lines represent bonds that are coming out of the plane of the paper, while the vertical lines represent bonds that are going into the plane of the paper. The orientation of the hydroxyl group on the penultimate carbon is determined by looking at the Fischer projection so that the
group is at the top, and the molecule is oriented vertically.
If the hydroxyl group on the penultimate carbon is oriented to the right in the Fischer projection, the sugar is classified as a D isomer. If the hydroxyl group on the penultimate carbon is oriented to the left in the Fischer projection, the sugar is classified as an L isomer.
It's worth noting that the position of the hydroxyl group on the carbon farthest from the carbonyl group does not affect whether a sugar is classified as a D or L isomer. This carbon is not the anomeric carbon, and it does not determine the overall stereochemistry of the molecule.
To know more about carbon :-
brainly.com/question/22530423
#SPJ4
What compounds break up into ions in solution?
Answer:B
Explanation:
How does the acidity of a solution change with increasing concentration of hydrogen ions (H+)?
Answer: If you add acid to a solution the concentration of hydrogen ions (acidity) increases and the pH decreases.
Explanation:
Answer:
The acidity of a solution increases with increasing concentration of hydrogen ions (H+). The concentration of H+ in a solution determines the pH of the solution, with lower pH values indicating a more acidic solution.
Explanation:
Which of these is a possible boiling point for a 1.0 M solution of sugar in water? The normal boiling point of water is 100 degrees celsius
99.7
-0.3
100.3
According to the question 100.3 is the possible boiling point for a 1.0 M solution of sugar in water.
What is boiling point?Boiling point is the temperature at which a liquid changes to a gas or vapor. It is the temperature at which the vapor pressure of the liquid becomes equal to the atmospheric pressure. Water boils at 212°F (100°C) at sea level, but the boiling point decreases as altitude increases. Boiling point is an important property of liquids and is used to separate mixtures of liquids, to determine the purity of a substance, and to measure the composition of a mixture of liquids.
100.3 is the possible boiling point for a 1.0 M solution of sugar in water. The boiling point of a solution will be higher than that of pure water due to the increased solute concentration. The increase in boiling point is dependent on the molarity (moles of solute per liter of solution) of the solution. For a 1.0 M solution of sugar, the boiling point should be about 100.3 degrees Celsius.
To learn more about boiling point
https://brainly.com/question/40140
#SPJ1
determine the percent error in the experimentally determined value for the enthalpy of formation of mgo.
From the information provided, the percent error in the experimentally determined value for the enthalpy of formation of MgO is 1.96%
To determine the percent error in the experimentally determined value for the enthalpy of formation of MgO, we need to compare the experimental value to the accepted or theoretical value.
The accepted value for the enthalpy of formation of MgO is: -601.8kJ/mol. Let's assume that the experimentally determined value is -590.0 kJ/mol.
The percent error can be calculated using the following formula:
Percent error = |(Experimental value - Theoretical value) / Theoretical value| x 100%
Substituting the values, we get:
Percent error = |(-590.0 kJ/mol - (-601.8 kJ/mol)) / (-601.8 kJ/mol)| x 100%
Percent error = |(11.8 kJ/mol) / (601.8 kJ/mol)| x 100%
Percent error = 1.96%
Learn more about percent error here: brainly.com/question/5493941
#SPJ4
22.3.2 Test (CST): The Solar System
Question 7 of 10
In which coastal area is the tide rising to form a high tide?
A. One that is rotating toward the Sun
B. One that is rotating toward the Moon
C. One that is rotating away from the Moon
D. One that is rotating away from the Sun
In an ecosystem, the coastal area that is rotating toward the moon is the area where tide rising to form a high tide.
What is an ecosystem?
Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.
Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .
Learn more about ecosystem,here:
https://brainly.com/question/1673533
#SPJ1
a) Calculate the pH of a 0.1 mol/L solution of hydrosulfuric acid [4 marks]
b) Calculate the concentration of H3O+ present in this solution (2 marks)
Answer:
a) The pH of a 0.1 mol/L solution of hydrosulfuric acid is 1.00.
b) The concentration of H3O+ present in this solution is 0.1 mol/L.
Answer:
A) To calculate the pH of a 0.1 mol/L solution of hydrosulfuric acid (H2S), we can first calculate the concentration of hydronium ions (H3O+) produced in solution.
Hydrosulfuric acid dissociates in water according to the following equation:
H2S + H2O → H3O+ + HS-
Since the concentration of hydrosulfuric acid is 0.1 mol/L, the concentration of hydronium ions produced will also be 0.1 mol/L.
Next, we can use the concentration of hydronium ions to calculate the pH of the solution:
pH = -log[H3O+] = -log(0.1) = 1
So, the pH of a 0.1 mol/L solution of hydrosulfuric acid is 1.
B) The concentration of H3O+ present in the solution is 0.1 mol/L.
Explanation:
ALLEN
You started a savings account by depositing $4,200. The savings account earns 2.1% APY, compounded monthly. What was the balance in the account after 2 months
The compound interest for two months will be $13.98. Then, after two months, there will be $ 4213.98 in the account.
What is compound interest ?Compound interest is the interest on normal interest. Compound interest for an amount p for a n years with a rate of interest R% can be calculated as follows:
A = P [1 + r/100]ⁿ
Given that, the amount p = $4200
rate of compound interest = 2.1 %
time period n = 2 months, it is 0.16 years.
Now the compound interest for two months = $ 4200× [1 + 2.1/100]^0.16 - $4200 = $13.98
Now, the amount after two months will be $ 4213.9.
Therefore, there will be $4213.9 in the account after two months.
Find more on compound interest :
https://brainly.com/question/26457073
#SPJ1
Why do linear and trigonal planar molecules look the same in 2-dimensional drawings and in three dimensions?? NEED ANSWER PLS
Answer:
Because they have the same arrangement of atoms in space. Both have a straight line or a flat triangular arrangement of atoms, respectively, with bond angles of 180° and 120° respectively. In 2-dimensional drawings, it is not possible to see the differences in the three-dimensional arrangement of atoms, so both linear and trigonal planar molecules appear as a straight line or a flat triangle. However, in three dimensions, it is possible to see the differences in the arrangement of the bonds and the orientation of the molecule in space, allowing us to distinguish between linear and trigonal planar molecules.
Explanation:
Tell me if you still confuse
ALLEN
a gas at 24o c with a pressure of 100 kpa has a volume of 5.0 l. if the volume increases to 20.0 l what is its new pressure? assume that the temperature remains constant.
We can use the ideal gas law, PV = nRT, to determine the new pressure of the gas when its volume increases. The ideal gas law relates the pressure, volume, and temperature of a gas to the number of moles (n) of gas and the gas constant (R).
First, we'll convert the temperature to kelvins:
[tex]T (K) = 24°C + 273 = 297 K[/tex]
Next, we'll use the original pressure and volume to determine the number of moles of gas (n):
PV = nRT
n = PV / RT
n = (100 kPa * 5.0 L) / (8.31 J/mol K * 297 K) = 0.17 mol
Finally, we'll use the new volume, the number of moles of gas, and the temperature to determine the new pressure:
PV = nRT
P = (nRT) / V
P = (0.17 mol * 8.31 J/mol K * 297 K) / (20.0 L) = 46.5 kPa
So the new pressure of the gas is 46.5 kPa, when its volume increases from 5.0 L to 20.0 L while the temperature remains constant at 24°C.
To learn more about ideal gas law refer to this link
https://brainly.com/question/28257995
#SPJ4
Which phase change represents a decrease in entropy?
a. Solid to liquid
b. Gas to solid
c. Liquid to gas
d. Solid to gas
Iron has a density of 7. 86 g/cm3 (1 cm3=1 mL). Calculate the volume (in dL) of a piece of iron having a mass of 4. 18 kg. Note that the density is provided in different units of volume and mass than the desired units of volume (dL) and the given units of mass (kg). You will need to express the density in kg/dL (1 cm3 = 1 mL) before calculating the volume for the piece of iron
510.17 centimetres cube is the volume of iron has a density of 7.86 gram per centimetres cube ( 1 centimetre cube = 1ml) and has a mass of 4.01 kg.
Density is the amount of mass of a substance present per volume of the cubic centimetre and it is the ratio of mass of a substance to the volume of the substance with a unit centimetre cube.
The iron has a density of 7.86 gram per centimetres cube and mass of 4.01 kg so,
mass in grams= [tex]\frac{4.01}{1000} = 0.0041g.\\Density= \frac{mass}{volume}[/tex]
Substituting the values in the equation, we get:-
volume= [tex]\frac{0.0041}{7.86} = 510.17 cm^{3} .[/tex]
To know more about Density go through:-
https://brainly.com/question/1354972
#SPJ4
What is the role of entropy in a combustion reaction?
In a combustion reaction, entropy plays a role in determining the direction of the reaction and the amount of heat released.
What is the second law of the thermodynamics?According to the second law of thermodynamics, a reaction is favored if it leads to an increase in the overall entropy of the system. In a combustion reaction, the breaking of chemical bonds in the reactants leads to the formation of new bonds in the products, resulting in an increase in the number of microstates and entropy.
The heat released in the reaction also contributes to the increase in entropy. As a result, combustion reactions are generally exothermic and spontaneous.
Learn more on thermodynamics here: https://brainly.com/question/29662329
#SPJ1
which solution has a lower boiling point? question 6 options: a 1.5m c2h6 solution a 0.75m nacl solution all four solutions have the same boiling point a 1.5m c3h8 solution a 0.5m mgcl2 solution
Ebullioscopy is the process of finding lower boiling point so that result is NaCl
Ebullioscopy is the process of changing the boiling point of a substance by adding a nonvolatile solute; T = W is the formula used to determine the temperature change. I where I is the Van't Hoff factor and W is equal to nsolute/msolvent. Since each material has the same molarity, n is constant across the board.
I is equal to the initial/final particles.
AlCl₃ dissociates atAl⁺³ and 3Cl⁻, resulting in 4 final particles and 1 initial particle, I = 4/1 = 4; NaCl dissociates at Na⁺ and Cl⁻ resulting in 2 final particles and 1 initial particle, I = 2/1 = 2; and MgCl₂ dissociates at Mg⁺² and 2Cl⁻, resulting in 3 final particles and 1 initial particle, I = 3/1 = 3.C₆H₁₂O₆ does not dissociates. The solution containing AlCl₃ will therefore have the highest T and, as a result, the Low boiling point is NaCl.
Learn more about Ebullioscopy here
https://brainly.com/question/13925296
#SPJ4
Balance the chemical reaction
using an atom inventory.
What is the coefficient for
sodium?
[?]Na + Cl₂ → [ ]NaCl
The coefficient for sodium in the balanced equation would be 1.
Balancing chemical equationWhen balancing a chemical equation, you want to make sure that the number of atoms of each element is the same on both sides of the equation. To do this, you can follow these steps:
The unbalanced equation with the correct chemical formulas for the reactants and products.Na + Cl2 -> NaCl
Count the number of atoms of each element on both sides of the equation.On the left side, there is 1 Na and 2 Cl.
On the right side, there is 1 Na and 1 Cl.
Add coefficients to the reactants and/or products to balance the number of atoms of each element. In this case, we can balance the number of chlorine atoms by adding a coefficient of 2 in front of NaCl, like this:Na + Cl2 -> 2 NaCl
Thus, the coefficient of sodium is 1.
More on balancing chemical equations can be found here: https://brainly.com/question/28294176
#SPJ1
the thermometer you use to measure the freezing temperature of the solvent actually records a temperature that is 0.12c too high. unfortunately you break this thermometer and borrow a fellow students thermometer, which reads 0.11c too low. if the molality of your solution is 0.30, calculate the contribution to the percentage error in your result due to not correcting for the errors in the thermometer readings.
The contribution to the percentage error in the freezing point depression due to the errors in the thermometer readings is 1.76%.
The freezing point depression is a colligative property that depends only on the molality of the solute particles in a solution and is independent of the identity of the solute. Therefore, the freezing point depression is given by the equation:
ΔTf = Kf x molality
where ΔTf is the change in the freezing point, Kf is the freezing point depression constant for the solvent, and molality is the concentration of solute particles in moles per kilogram of solvent.
However, in this case, there are errors in the thermometer readings that can contribute to the uncertainty in the calculated freezing point depression. The errors are +0.12°C for the initial thermometer and -0.11°C for the borrowed thermometer.
The total error due to thermometer readings is the sum of the errors from both thermometers, which is:
Total error = +0.12°C - 0.11°C = +0.01°C
The percentage error due to the thermometer readings can be calculated as:
Percentage error = (total error / measured freezing point) x 100%
The measured freezing point is the sum of the actual freezing point depression and the error due to the thermometer readings. Assuming that the actual freezing point depression was accurately measured, the measured freezing point can be expressed as:
Measured freezing point = actual freezing point depression + total error
Since the molality of the solution is given as 0.30, the actual freezing point depression can be calculated using the freezing point depression constant for the solvent.
Assuming a typical freezing point depression constant for the water of 1.86°C/m, the actual freezing point depression would be:
actual freezing point depression = Kf x molality = 1.86°C/m x 0.30 mol/kg = 0.558°C
Therefore, the measured freezing point would be:
Measured freezing point = actual freezing point depression + total error = 0.558°C + 0.01°C = 0.568°C
The percentage error due to the thermometer readings would be:
Percentage error = (total error / measured freezing point) x 100% = (0.01°C / 0.568°C) x 100% = 1.76%
To learn more about freezing point depression
https://brainly.com/question/12844810
#SPJ4
Drs. Avery, MaCleod, and McCarty used the enzyme _____________ to remove the proteins from the cell extracts. Question 7 options:
protease
DNase
RNase
All answers are correct
No answers are correct
Drs. Avery, MacLeod, and McCarty used the enzyme protease to remove the proteins from the cell extracts." Therefore, the correct answer is the first option.
Proteases are enzymes that break down proteins into smaller peptides or amino acids. This is important for the digestion of food and the regulation of many cellular processes. Drs. Avery, MacLeod, and McCarty used protease to remove the proteins from the cell extracts in order to isolate and study the DNA in their experiments. This was a crucial step in their research, which helped to establish that DNA is the genetic material of the cell.
Learn more about protease enzyme at https://brainly.com/question/28823660
#SPJ11
an ionic compound will dissolve when the attraction between the ______ molecules and the ions is greater than the attraction between the _____ themselves
An ionic compound will dissolve when the attraction between the polar molecules and the ions is greater than the attraction between the ions themselves.
Polar motes A polar patch is generally formed when the one end of the patch is said to retain more positive charges and whereas the contrary end of the patch has negative charges, creating an electrical pole. When a patch is said to have a polar bond, also the centre of the negative charge will be on one side, whereas the centre of positive charge will be in the different side. The entire patch will be a polar patch.
Ion, any snippet or group of tittles that bears one or further positive or negative electrical charges. appreciatively charged ions are called cations; negatively charged ions, anions. Ions are formed by the addition of electrons to, or the junking of electrons from, neutral tittles or motes or other ions.
Learn more about Ionic compound:
https://brainly.com/question/29348041
#SPJ4
lysine is an essential amino acid. one experiment showed that each molecule of lysine contains two nitrogen atoms. another experiment showed that lysine contains 19.2% n, 9.64% h, 49.3% c, and 21.9% o by mass. what is the molecular formula for lysine?
The molecular formula for lysine is [tex]C6H14N2O2[/tex] which in one experiment showed that each molecule of lysine contains two nitrogen atoms while the other contains 19.2% N, 9.64% H, 49.3% C, and 21.9% O by mass.
The molecular formula for lysine is calculated using the percentages of each element.
Given for nitrogen, the mass percentage = 19.2%
The atomic mass of nitrogen (N) known = (14.01 g/mol)
The number of atoms of nitrogen = 19.2/14.01 = 1.38 ≈ 2
For hydrogen, the mass percentage = (9.64%)
the atomic mass of hydrogen (H) known = (1.01 g/mol)
The number of atoms of hydrogen = 9.64/1.01 = 9.54 ≈ 10
For carbon, the mass percentage = (49.3%)
the atomic mass of carbon (C) known = (12.01 g/mol)
The number of atoms of carbon = 49.3/12.01 = 4.11 ≈ 6
For oxygen, the mass percentage = (21.9%)
the atomic mass of oxygen (O) known = (16.00 g/mol)
The number of atoms of oxygen =21.9/16 = 1.36 ≈ 2
Therefore, the molecular formula of lysine is [tex]C6H14N2O2[/tex].
To learn more about lysine click here https://brainly.com/question/21090800
#SPJ4
Threat and risk assessment of a suspect is referred to as
O suspect-based profiling
O geographical profiling
O crime scene profiling
O psychological profiling
Assessment of a suspect's threat and risk is referred to as "suspect-based profiling".
Explain about the suspect-based profiling?Understanding the numerous risks to your IT systems, assessing the amount of risk to which these systems are exposed, and suggesting the proper level of protection all require the use of a Threat and Risk Assessment (TRA).
In order to support informed risk-based decision-making, a STRA is the whole activity of assessing as well as reporting privacy issues for just an information system. Risk assessments and proposed interventions are also recorded in a STRA. Threat assessments look into problems as they arise or are tried, whereas risk assessments examine a wider range of possibilities to identify any prospective difficulties and the potential scope of damage. Providing suggestions that maximise the protection information confidentiality, integrity, and availability while maintaining functioning is the goal or conclusion of a threat and risk assessment.Thus, assessment of a suspect's threat and risk is referred to as "suspect-based profiling".
To know more about the suspect-based profiling, here
https://brainly.com/question/28208152
#SPJ1
in going from room temperature (25 c) to 10 c above room temperature, the rate of reaction triples. calculate the activation energy for the reaction .
Answer: Ea=5.29 × 10⁴ J/mol
Explanation:In going from 25 °C (298 K) to 35 °C (308 K), the rate of the reaction doubles. Since the rate of the reaction depends on the rate constant (k), this implies that the rate constant doubles. We can find the activation energy (Ea) using the two-point form of the Arrhenius equation.
Explanation:
The voltage produced by the colorimeter is __________ to the absorbance of the sample and ____________ to the light intensity.
A) Directly proportional, indirectly proportional
B) Directly proportional, directly proportional
C) Indirectly proportional, indirectly proportional
D) Indirectly proportional, directly proportional
E) None of the above
The voltage produced by the colorimeter is __________ to the absorbance of the sample and ____________ to the light intensity.
E) None of the above
Relation between transmittance and absorbance is as follows.
Therefore we know that the amount of light that passes through a solution is known as transmittance.
It can be expressed as follows;
T= [tex]\frac{I_{t} }{I_{0} }[/tex]
Now we know that, I, is the intensity of transmitted light.
I is the initial intensity of light beam.
Then the colorimeter produces an output voltage which is linearly varies with transmittance that is light intensity.
Relation between absorbance and transmittance is as follows:
A = log ([tex]\frac{1}{T}[/tex])
The reciprocal of transmittance of the sample varies logarithmically varies with absorption.
Therefore, we can say that the voltage produced by the colorimeter is varies logarithmically reciprocal to the absorbance of the sample and linear to the light intensity.
To learn more about light intensity, click here:
brainly.com/question/9195922
#SPJ4
The reaction of benzaldehyde with acetone and sodium hydroxide produces v Choose... stilbere This is an example of Choose.... reaction dibenzylideneacetone benzocaine anthracene triphenyl methanol The reaction of benzaldehyde with acetone and sodium hydroxide produces Choose... This is an example of v Choose... reaction. a Diels-Alder a Wittig an aldol condensation a Fischer esterification a Grignard
Dibenzylideneacetone is formed when benzaldehyde reacts with acetone and sodium hydroxide. An aldol condensation process is seen here. The aldol condensation reaction.
is a process that occurs in the presence of a base (sodium hydroxide) between an aldehyde or ketone to generate a beta-hydroxy aldehyde or ketone, which may then be dehydrated to form an alpha,beta-unsaturated aldehyde or ketone. In this scenario, Dibenzylideneacetone is formed when benzaldehyde reacts with acetone and sodium hydroxide. An aldol condensation process is seen here. The aldol condensation reaction. the beta-hydroxy ketone produced (dibenzylideneacetone) is dehydrated to produce the alpha,beta-unsaturated ketone (stilbene is not formed in this reaction).
learn more about hydroxide here:
https://brainly.com/question/4251554
#SPJ4
a 1.375 g sample of a sugar found in seaweed is burned completely in oxygen to give 1.993 g of co2 and 0.9519 g of h2o. what is the empirical formula of this sugary substance?
We must establish the ratio of the atoms of each element in the compound in order to derive the empirical formula for sugar.
In chemistry, the simplest whole-number ratio of each element's atoms in a chemical compound is referred to as the empirical formula. It stands for the lowest component of a substance that nevertheless has its chemical characteristics. The empirical formula is crucial for figuring out a substance's makeup and comprehending its chemical behaviour. The empirical formula simply provides the relative proportions of the atoms, as opposed to the molecular formula, which provides the precise number of atoms in a molecule. The relative proportions of the elements in a compound must be known in order to derive the empirical formula of the substance. This information can be collected through tests like combustion analysis or elemental analysis.
Learn more about empirical formula here:
https://brainly.com/question/29506551
#SPJ4
how do you determine the range of electrolyte concentration in which a controlled flocculation occurs
The range of electrolyte concentration in which controlled flocculation occurs can be determined by performing a series of experiments where the electrolyte concentration is gradually increased or decreased.
Here are the general steps for determining the range of electrolyte concentration:
Prepare a series of solutions with different electrolyte concentrations by adding increasing or decreasing amounts of the electrolyte to the sample.
Mix the solutions thoroughly and allow them to sit for a specific period of time to allow for flocculation to occur.
Observe the samples and record any changes in the sample's appearance, such as increased turbidity or formation of flocs.
Compare the results of each sample to identify the range of electrolyte concentration at which controlled flocculation occurs.
Repeat the experiment several times to confirm the range of electrolyte concentration that results in controlled flocculation.
Once the range of electrolyte concentration is determined, it can be used to optimize the flocculation process by selecting an electrolyte concentration within the range to achieve the desired flocculation effect.
learn more about electrolyte here:
https://brainly.com/question/28213705
#SPJ4
Determine whether an interference pattern is observed on the other side of the slits in each experiment.
a. An electro n beam is aimed at two closely spaced slits. The beam is attenuated (made dimmer) to produce only 1 electron per minute.
b. An electron beam is aimed at two closely spaced slits. A light beam is placed at each slit to determine when an electron goes through the slit.
c. A high-intensity light beam is aimed at two closely spaced slits.
d. A gun is fired at a solid wall containing two closely spaced slits.
An interference pattern is observed on the other side of the slits in the experiments A,B,C but not in the experiment D.
A. Yes, an interference pattern is observed on the other side of the slits in this experiment. Even though the electrons are fired one at a time, the interference pattern emerges over time due to the wave-like nature of the electrons.
B. Yes, an interference pattern is observed on the other side of the slits in this experiment. The act of observing which slit the electron goes through causes the wave function to collapse and destroys the interference pattern.
C. Yes, an interference pattern is observed on the other side of the slits in this experiment. The high-intensity light beam acts as a wave and creates an interference pattern as it passes through the two slits.
D. No, an interference pattern is not observed on the other side of the slits in this experiment. A gun firing solid particles like bullets is a classical object and does not exhibit wave-like behavior, so no interference pattern can be observed.
To learn more about interference pattern Click here:
brainly.com/question/1581262
#SPJ4
name the type of chemical reaction that occurs when magnesium chloride solution (mgcl2) reacts with sodium carbonate solution (na2co3).
A double displacement reaction, also known as a precipitation reaction, occurs when magnesium chloride solution (MgCl2) reacts with sodium carbonate solution (Na2CO3).
The balanced chemical equation for the reaction is
MgCl2 (aq) + Na2CO3 (aq) → MgCO3 (s) + 2NaCl (aq)
In this reaction, the magnesium ion (Mg2+) from MgCl2 reacts with the carbonate ion (CO32-) from Na2CO3 to form solid magnesium carbonate (MgCO3) and aqueous sodium chloride (NaCl). This reaction is a double displacement reaction because the positive and negative ions in the reactants switch places to form the products. Additionally, the formation of a solid product, magnesium carbonate, indicates that this reaction is also a precipitation reaction.
For more such questions on chemical reaction
https://brainly.com/question/29470602
#SPJ4
Find the ionic and net ionic equation for HC2H3O2 + Mg(OH)2 = Mg(C2H3O2)2 + H2O
The ionic and net ionic equations for HC₂H₃O₂ + Mg(OH)₂ → Mg(C₂H₃O₂)₂ + H₂O is 2H⁺ + 2(C₂H₃O₂)⁻ + Mg²⁺ + 2 (OH)⁻ → Mg ²⁺ + 2(C₂H₃O₂)⁻ + 2H⁺ + 2OH⁻.
Ion equations are chemical equations that display the ions involved in a process. Ions that mix in a solution to create new compounds, to put it another way. Spectator ions are the ions that do not participate. While a complete ionic equation also shows the spectator ions, a net ionic equation shows the chemical species engaged in the reaction.
Thus, 2H⁺ + 2(C₂H₃O₂)⁻ + Mg²⁺ + 2 (OH)⁻ → Mg ²⁺ + 2(C₂H₃O₂)⁻ + 2H⁺ + 2OH⁻ is the net ionic equation.
Learn more about the net ionic equation here:
https://brainly.com/question/15466794
#SPJ4
What is the chemical formula for lead(ll)nitrate and calculate it mole when the mass is 7. 04g
The chemical formula for lead (II) nitrate is Pb(NO3)2 and there are approximately 0.0212 moles of lead (II) nitrate present in 7.04 grams of the compound.
To calculate the number of moles of lead (II) nitrate present in 7.04 grams of the compound, we first need to determine its molar mass.
The molar mass of Pb(NO3)2 can be calculated by adding the atomic masses of lead, nitrogen, and oxygen, multiplied by the number of atoms of each element in the formula:
Molar mass of Pb(NO3)2 = (207.2 g/mol for Pb) + (2 × 14.0 g/mol for N) + (6 × 16.0 g/mol for O)
= 331.2 g/mol
Using the formula for moles:
moles = mass / molar mass
Plugging in the given mass and the calculated molar mass, we get:
moles = 7.04 g / 331.2 g/mol ≈ 0.0212 mol
To learn more about moles Click here:
brainly.com/question/26416088
#SPJ4
Perform the following calculations and report the answer with the correct number of significant figures.
59.9x35??????????
