The work done on the particle attached to the spring is 2.45 J.
To determine the work done on the spring when it expands from a length of 20 mm to 40 mm, we can calculate the change in potential energy stored in the spring.
The change in potential-energy (ΔPE) can be calculated using the formula:
ΔPE = (1/2) * k * (x_final^2 - x_initial^2)
where k is the stiffness of the spring and x_final and x_initial are the final and initial displacements of the spring, respectively.
Given:
Unstretched length (x_initial) = 50 mm = 0.05 m
Final length (x_final) = 40 mm = 0.04 m
Stiffness (k) = 5 kN/m = 5000 N/m
Substituting these values into the formula, we can calculate the work done on the spring:
ΔPE = (1/2) * 5000 N/m * (0.04 m^2 - 0.05 m^2)
ΔPE = (1/2) * 5000 N/m * (-0.001 m^2)
ΔPE = -2.5 J (negative sign indicates work done on the spring)
Therefore, the work done on the spring is -2.5 J.
To calculate the work done on a particle attached to a spring compressed by 0.7 m, we can use the formula:
Work = F * s
where F is the spring force and s is the displacement of the particle.
Given:
Spring force (F) = 5 s^2 N/m
Compression (s) = 0.7 m
Substituting these values into the formula, we can calculate the work done:
Work = 5 (0.7 m)^2
Work = 5 * 0.49 m^2
Work = 2.45 J
Therefore, the work done on the particle attached to the spring is 2.45 J.
Learn more about spring from the given link
https://brainly.com/question/14670501
#SPJ11 :
Problem 1 (30 points) Consider two objects of masses m₁= 9.636 kg and m₂ = 3.459 kg. The first mass (m₂) is traveling along the negative y-axis at 54.35 km/hr and strikes the second stationary mass m₂, locking the two masses together. a) (5 Points) What is the velocity of the first mass before the collision? m1 m/s b) (3 Points) What is the velocity of the second mass before the collision? Vm2=< m/s c) (1 Point) The final velocity of the two masses can be calculated using the formula number: (Note: use the formula-sheet given in the introduction section) d) (5 Points) What is the final velocity of the two masses? m/s e) (4 Points) Choose the correct answer: f) (4 Points) What is the total initial kinetic energy of the two masses? Ki= J g) (5 Points) What is the total final kinetic energy of the two masses? Kf= h) (3 Points) How much of the mechanical energy is lost due to this collision? AEint
Consider two objects of masses m₁= 9.636 kg and m₂ = 3.459 kg. The first mass (m₂) is traveling along the negative y-axis at 54.35 km/hr and strikes the second stationary mass m₂, locking the two masses together.
(A) What is the velocity of the first mass before the collision?Initial velocity of the first mass, m₁ = 54.35 km/hr = (54.35 x 1000)/(60 x 60) m/s = 15.096 m/s.
(B) What is the velocity of the second mass before the collision?As the second mass, m₂ is stationary, its initial velocity is 0 m/s.
(C) The final velocity of the two masses can be calculated using the formula number:
The formula for inelastic collision ism₁u₁ + m₂u₂ = (m₁ + m₂)v, where, u₁ = initial velocity of the first object, u₂ = initial velocity of the second object, v = final velocity of both the objects.Initial velocity of the first object, u₁ = 15.096 m/sInitial velocity of the second object, u₂ = 0 m/sMass of the first object, m₁ = 9.636 kgMass of the second object, m₂ = 3.459 kgFinal velocity of both the objects, v = ?m₁u₁ + m₂u₂ = (m₁ + m₂)v9.636(15.096) + 3.459(0) = (9.636 + 3.459)v145.066256 = 13.095vv = 11.08 m/s(D) What is the final velocity of the two masses?Final velocity of the two masses, v = 11.08 m/s.
(E) Choose the correct answer:
Total momentum before the collision = m₁u₁ + m₂u₂Total momentum after the collision = (m₁ + m₂)vTherefore, total momentum before the collision = total momentum after the collision= m₁u₁ + m₂u₂ = (m₁ + m₂)
(F) The total initial kinetic energy of the two masses, Ki = 0.5m₁u₁² + 0.5m₂u₂²Ki = 0.5(9.636)(15.096)² + 0.5(3.459)(0)²Ki = 1092.92 J
(G) The total final kinetic energy of the two masses, Kf = 0.5(m₁ + m₂)v²Kf = 0.5(9.636 + 3.459)(11.08)²Kf = 737.33 J
(H) How much of the mechanical energy is lost due to this collision?The mechanical energy lost due to the collision is given byAEint = Ki - KfAEint = 1092.92 - 737.33 = 355.59 JHence, the mechanical energy lost due to this collision is 355.59 J.
About VelocityVelocity is a foreign term that means speed. Speed is the displacement of an object per unit time. This speed has units, namely m/s or m.s^-1 (^ is the power symbol). What is the difference between speed and velocity? Velocity or speed, the quotient between the distance traveled and the time interval. Velocity or speed is a scalar quantity. Speed or velocity is the quotient of the displacement with the time interval. Speed or velocity is a vector quantity.
Learn More About Velocity at https://brainly.com/question/80295
#SPJ11
what is the exchange particle for the electromagnetic force?
The exchange particle for the electromagnetic force is the photon.
What is electromagnetic force? Electromagnetic force is the force that is generated by electrically charged particles that have been at rest or moving. It's one of the four fundamental forces in physics. These forces help in describing the fundamental forces of nature. The electromagnetic force is very important for everything around us. Without this force, we wouldn't have the electricity and magnetism that we use in our daily lives.
What is a photon? The photon is the exchange particle for the electromagnetic force. It's a particle that has zero rest mass and moves at the speed of light. It has both wave-like and particle-like characteristics. It was the first particle of light to be identified. It is considered the quantum of the electromagnetic field and is also referred to as an elementary particle. It has no electric charge, a spin of 1, and is an unstable particle.
Learn more about the photon here: https://brainly.com/question/30820906
#SPJ11
A child runs towards some ice at 4 m/s. She slides across the ice, coming to a stop at 8 m. What is her acceleration rate?
Then, how fast would you have to be going initially to slide on the same ice for 15s?
The given variables in the problem are as follows:
Initial velocity = 4 m/s
Displacement = 8 m
Time taken = Unknown
Acceleration = Unknown
We can calculate the acceleration using the formula:
distance = (initial velocity * time) + (1/2) * acceleration * [tex]time^2[/tex]
Substitute the given values in the above equation.
8 = (4 * t) + (1/2) * a * [tex]t^2[/tex]
Now, it is required to determine the acceleration rate.
Thus, we can use the following formula to find the
acceleration rate: (1/2) * a = (d - v*t) / [tex]t^2[/tex](1/2) * a = (8 - 4*t) / [tex]t^2a[/tex] = 2*(8 - 4*t) / [tex]t^2a[/tex] = 16/[tex]t^2[/tex]
Similarly,
to find the initial velocity,
we can use the formula:
distance = (initial velocity * time) + (1/2) * acceleration * [tex]time^2[/tex]
Substituting the given values in the above equation, we get:
15 = (u * t) + (1/2) * a * [tex]t^2[/tex]
Now,
since there are two unknowns in the above equation (initial velocity and acceleration), we can use the first equation that we obtained to substitute the value of acceleration in terms of time, and substitute that in the second equation.
This gives:
15 = u*t + 8 - 2t/ t
15 = u + 8/t - 2u
15t = u(t+4)u = 15t/(t+4)]
Thus, the initial velocity needed to slide on the same ice for 15s would be 15t/(t+4).
To know more about velocity visit:
https://brainly.com/question/30559316
#SPJ11
. A cliff diver from the top of a 120 m cliff. He begins his dive by jumping up with a velocity of 5 m/s. a. How long does it take for him to hit the water below? b. What is his velocity right before he hits the water? 5. Michael Jordan slam dunks a basketball and a physics student observes that Iverson's feet are 1 m above the floor at his peak height. At what upward velocity must Iverson leave the floor to achieve this? 6. A bullet is shot vertically into the air with a velocity of +422 m/s. Neglecting air resistance, a. How long is the bullet in the air? b. How high does the bullet go? 7. A sandbag is dropped from a hot air balloon that is 330 m above the ground and rising at a rate of 3.5 m/s. a. How long does it take for the sandbag to hit the ground? b. How fast is the sand bag going when it hits the ground? At what height is the balloon when the sand bag hits the
The diver begins his dive by jumping up with a velocity of 5 m/s and it is given that the height of the cliff is 120 m. The acceleration of gravity is 9.81 m/s².
Therefore, using the kinematic equation,
v² = u² + 2as,
we can find the time taken by the cliff diver to reach the water below.
v² = u² + 2as
120 = 5² + 2(9.81)s
120 = 25 + 19.62s
19.62s = 95s = 4.84 s
Therefore, it takes 4.84 s for the cliff diver to hit the water.b. We can find the velocity of the diver right before he hits the water using the kinematic equation,
v = u + at, where
a = acceleration due to gravity,
t = time taken,
u = initial velocity, and
v = final velocity.
v = u + at
v = 5 + (9.81)(4.84)
v = 50.63 m/s
Therefore, the velocity of the cliff diver right before he hits the water is 50.63 m/s.5. The vertical velocity of the basketball player when he reaches his maximum height is zero because the vertical velocity at the highest point is zero.
To know more about velocity visit:
https://brainly.com/question/30559316
#SPJ11
When the tension in a cord is 75 N, the wave speed is 140 m/s.
If the cord is 5 m long, what is its mass? ANS:0.019 kg
When the tension in a cord is 75 N and the wave speed is 140 m/s, find its mass when its length is 5 m. The formula to use for this problem is as follows:
[tex]\[v = \sqrt {\frac {T}{\mu }}\][/tex]
where, v is the wave speed.
T is the tension in the cord, and μ is the mass per unit length of the cord.
To solve for the mass per unit length, we can use the formula below:μ = T / v²
To determine the mass of the cord, we need to find the mass per unit length, then multiply it by the length of the cord.μ = T / v²μ = 75 N / (140 m/s)²μ = 75 / (140)²μ = 0.00365 kg/m
Mass of cord = mass per unit length × length of cordm = μLm = 0.00365 kg/m × 5 mm = 0.01825 kg = 0.019 kg (rounded off to three significant figures)
Therefore, the mass of the cord is 0.019 kg.
To know more about mass visit:
https://brainly.com/question/11954533
#SPJ11
A cube has sides of length L=0.300 m. It is placed with Part A one corner at the origin as shown in electric field is not uniform but is given by E =(−4.76 N/(C⋅m))xi^+(2.99 N/(C⋅m))zk^. Find the electric flux through each of the six cube faces S1 ,S 2 ,S 3 ,S 4 ,S 5 , and S6
. Enter your answers in newtons per coulomb times meter squared separated by commas. Figure 1 of 1 \& Incorrect; Try Again; 4 attempts remaining Part B Find the total electric charge inside the cube. Express your answer in coulombs. Find the total electric charge inside the cube. Express your answer in coulombs.
A} The electric flux through each of the six cube faces is:
Φ1 = Φ2 = Φ3 = Φ4 = -0.4284 N·m²/C
Φ5 = Φ6 = 0 N·m²/C
B} The total electric charge inside the cube will be:
Q = ∫∫∫ ρ dV
where Q is the total charge, ρ is the charge density, and dV is the volume element.
To find the electric flux through each of the six cube faces, we can use the formula:
Φ = ∫∫ E · dA
where Φ is the electric flux and dA is the vector area element of each face.
For each face, we can calculate the electric flux by taking the dot product of the electric field E and the area vector A.
Given:
E = (-4.76 N/(C·m))xi + (2.99 N/(C·m))zk
L = 0.300 m
The area of each face is L².
Let's calculate the electric flux through each face:
S1 (Top face):
Φ1 = E · A1 = (-4.76 N/(C·m)) * (0.300 m * 0.300 m) '
= -0.4284 N·m²/C
S2 (Bottom face):
Φ2 = E · A2 = (-4.76 N/(C·m)) * (0.300 m * 0.300 m)
= -0.4284 N·m²/C
S3 (Front face):
Φ3 = E · A3 = (-4.76 N/(C·m)) * (0.300 m * 0.300 m)
= -0.4284 N·m²/C
S4 (Back face):
Φ4 = E · A4 = (-4.76 N/(C·m)) * (0.300 m * 0.300 m)
= -0.4284 N·m²/C
S5 (Left face):
Φ5 = E · A5 = 0 (The electric field is perpendicular to this face, so there is no flux through it)
S6 (Right face):
Φ6 = E · A6 = 0 (The electric field is perpendicular to this face, so there is no flux through it)
Therefore, the electric flux through each of the six cube faces is:
Φ1 = Φ2 = Φ3 = Φ4 = -0.4284 N·m²/C
Φ5 = Φ6 = 0 N·m²/C
Now let's move on to Part B.
To find the total electric charge inside the cube, we can use Gauss's Law, which states that the electric flux through a closed surface is equal to the total charge enclosed divided by the electric constant (ε₀).
Given that the electric field is not uniform, we cannot directly use Gauss's Law for a simple cube.
Instead, we need to calculate the charge enclosed by integrating the electric field over the volume of the cube.
The total electric charge inside the cube will be:
Q = ∫∫∫ ρ dV
where Q is the total charge, ρ is the charge density, and dV is the volume element.
Learn more about Total Electric Charge at
brainly.com/question/30906088
#SPJ4
On a ship of 12,000 tonnes displacement with KG 9.0m, 200 tonnes of cargo was shifted from the upper deck Kg 12.0m to the lower hold, Kg 2.0m. Calculate the final KG of the ship.
The final KG of the ship is 9.01639 m.The ship of 12,000 tonnes displacement with KG 9.0m, 200 tonnes of cargo was shifted from the upper deck Kg 12.0m to the lower hold, Kg 2.0m.
We need to calculate the final KG of the ship.
We know that; Moment before = Moment after
Moment before = (total weight on the ship) x (KG of ship)Moment after = (total weight on the ship) x (KG of ship).
The total weight of the ship is 12000 tonnes + 200 tonnes = 12200 tonnes
Moment before = (12000 x 9) + (200 x 12) = 108000 + 2400 = 110400 tonne-meter
Moment after = (12000 x KG) + (200 x 2)12200 KG = 110400 / 12200 KG = 9.01639 m (final KG of ship).
Hence, the final KG of the ship is 9.01639 m.
Learn more about displacement here ;
https://brainly.com/question/29957379
#SPJ11
Saturn’s largest moon, Titan, has an atmosphere composed of what elements and what did scientist Carl Sagan predict about Titan?
Titan's atmosphere is primarily composed of nitrogen (about 98.4%) with a significant amount of methane (about 1.6%). It also contains small amounts of other hydrocarbons like ethane, propane, and acetylene.
Scientist Carl Sagan made several predictions about Titan based on his research and knowledge. One of his notable predictions was that Titan might have liquid hydrocarbon lakes or seas on its surface. This hypothesis was based on the observations of Titan's dense atmosphere and the presence of methane in its atmosphere. Sagan suggested that the surface temperature and pressure conditions on Titan could allow for the existence of liquid hydrocarbons, similar to how water exists in liquid form on Earth.
These predictions were later confirmed by the Cassini-Huygens mission, which arrived at Saturn in 2004. The Huygens probe, part of the mission, successfully landed on Titan's surface in 2005 and provided valuable data confirming the presence of liquid hydrocarbon lakes and seas. This discovery added to our understanding of Titan as a dynamic world with a unique environment in our solar system.
To learn more about Titan's atmosphere follow:
https://brainly.com/question/31420937
#SPJ11
The electrons in the beam of a television tube have an energy of 15keV. The tube is oriented so that the electrons move horizontally from east to west. At the electron's latitude the vertical component of the Earth's magnetic field points down with a magnitude of 40.4μT. What is the direction of the force on the electrons due to this component of the mannatic field? You have attempted this problem 0 times. You have unlimited attempts remaining.
The direction of the force on the electrons due to the vertical component of the Earth's magnetic field is northward or upward relative to the electrons' motion.
The right-hand rule states that if you point your right thumb in the direction of the positive charge's velocity (east to west in this case), and your fingers in the direction of the magnetic field (downward in this case), then the direction in which your palm faces represents the direction of the force acting on the positive charge.
Given that the vertical component of the Earth's magnetic field points down and has a magnitude of 40.4 μT, we can determine the direction of the force on the electrons.
Using the right-hand rule:
Point your right thumb to the west (the direction of electron velocity).
Point your fingers downward (the direction of the magnetic field).
The palm of your hand will face north (out of the page) or up from the perspective of the electrons.
Learn more about velocity here:
https://brainly.com/question/30559316
#SPJ11
The energy that comes from the Sun depends on the mass of the Sun that is being used up
a. Depends on the season
b. False
c. True
d. Depends on if it is night or day
The statement "The energy that comes from the Sun depends on the mass of the Sun that is being used up" can be described as false.
The energy emitted by the Sun is primarily a result of nuclear fusion reactions occurring within its core, specifically the fusion of hydrogen nuclei to form helium. This process releases a tremendous amount of energy in the form of light and heat.
The energy output of the Sun is primarily determined by its size and composition, rather than the mass that is being "used up" or consumed. The Sun's mass remains relatively constant over time due to a balance between the inward gravitational force and the outward pressure from nuclear fusion. While the Sun undergoes fusion and loses mass during this process, the energy output is not directly dependent on the amount of mass being consumed.
Factors such as solar activity, which can affect the Sun's energy output, are not related to the Sun's mass. Solar activity, including phenomena like sunspots and solar flares, is driven by complex magnetic processes within the Sun's atmosphere.
Therefore, the energy that comes from the Sun does not depend on the mass of the Sun that is being used up.
To know more about the Sun click this link-
https://brainly.com/question/31998244
#SPJ11
10. Consider a simple circuit consisting of a resistor and an ideal battery in series. If the resistance of the resistor increases, how does the power dissipated by the resistor change?
The resistance of the resistor increases, the power dissipated by the resistor decreases.
If the resistance of the resistor in a simple circuit increases, the power dissipated by the resistor will decrease.
The power dissipated by a resistor can be calculated using the formula:
P = (I^2) * R
Where P is the power, I is the current flowing through the resistor, and R is the resistance.
When the resistance increases, and assuming the battery voltage remains constant, Ohm's Law tells us that the current flowing through the circuit decreases.
As a result, the square of the current (I^2) decreases.
Since power is directly proportional to the square of the current and the resistance, when the resistance increases and the current decreases, the power dissipated by the resistor decreases.
This is because less current is flowing through the resistor, resulting in less energy being converted into heat.
Therefore, as the resistance of the resistor increases, the power dissipated by the resistor decreases.
Learn more about power from the given link
https://brainly.com/question/24858512
#SPJ11
If you are driving 30.6 m/s along a straight road and you look to the side for 2 seconds, how far have you traveled during this inattentive period? A. A light plane must reach a speed of 33 m/s for take-off. How long of a run-way is needed if the plane has a constant acceleration of 3.0 m/s
2
? B. If the acceleration due to gravity is 9.8 m/s
2
estimate (a) how long it would take King Kong to fall straight down from the top of the Empire State building (380 m) high, and (b) his velocity just before landing? C. A world class sprinter can run to top speed (of approximately 11.5 m/s ) in the first 15.0 meters of the race. (a) What is the average acceleration of this sprinter and (b) how long does it take her to reach a speed of 11.5 m/s ? D. A motorcycle is moving at 30.0 m/s when the rider applies the brakes, giving the motorcycle a constant deceleration. During the first 3.00 s the brakes are applied, the motorcycle slows to 15.0 m/s. What distance does the motorcycle travel from the instant braking begins until it comes to a complete rest?
Distance covered during inattentive period = 61.2 meters. The length of the runway needed for take-off = 544.5 m. King Kong's time before landing = 8.81 s. King Kong's velocity before landing = 86.14 m/s. Average acceleration of the sprinter = 9.8 m/s². Time taken for the sprinter to reach a speed of 11.5 m/s = 1.17 s. Distance covered by the motorcycle before coming to rest = 22.5 meters.
v=30.6 m/s,
t=2 sec,
a=0 (the car is not accelerating)
We know that,
Distance covered = v×t
= 30.6 × 2
= 61.2 meters
Therefore, the car travels 61.2 meters during this inattentive period.
Part A:
u = 0, v=33 m/s, a=3 m/s²
To find: Distance covered
We know that,v² = u² + 2as
⇒ s = (v² - u²) / 2a
⇒ s = (33² - 0) / 2 × 3
⇒ s = 544.5 m
Therefore, a 544.5 m long runway is needed for take-off.
Part B:
u=0, g= 9.8 m/s², h= 380 m
To find: (a) time taken, (b) velocity before landing
(a) Using the formula, s = ut + 1/2 at²
⇒ h = 0 + 1/2 × 9.8 × t²
⇒ t² = h / 4.9
= 380 / 4.9
= 77.55
⇒ t = 8.81 s
Therefore, it takes about 8.81 seconds for King Kong to fall straight down from the top of the Empire State building.
(b) Using the formula, v = u + at
⇒ v = 0 + 9.8 × 8.81
⇒ v = 86.14 m/s
Therefore, King Kong's velocity just before landing is 86.14 m/s.
Part C:
u = 0, v=11.5 m/s, s=15 m
To find: (a) average acceleration, (b) time taken
(a)Using the formula, v² = u² + 2as
⇒ a = (v² - u²) / 2s
⇒ a = (11.5² - 0) / 2 × 15
⇒ a = 9.8 m/s²
Therefore, the average acceleration of the sprinter is 9.8 m/s².
(b)Using the formula, v = u + at
⇒ t = (v - u) / a
⇒ t = (11.5 - 0) / 9.8
⇒ t = 1.17 s
Therefore, it takes 1.17 seconds for the sprinter to reach a speed of 11.5 m/s.
Part D:
u = 30.0 m/s, v=15.0 m/s, t= 3.00 s
To find: Distance covered
Using the formula, v = u + at
⇒ a = (v - u) / t
⇒ a = (15 - 30) / 3
⇒ a = -5 m/s²
The negative sign indicates deceleration.
Using the formula, s = ut + 1/2 at²
⇒ s = 30 × 3 + 1/2 × (-5) × (3)²
⇒ s = 45 - 22.5
⇒ s = 22.5 m
Therefore, the motorcycle covers a distance of 22.5 meters from the instant braking begins until it comes to a complete rest.
Learn more about the acceleration from the given link-
https://brainly.com/question/25876659
#SPJ11
a) (7 marks) On a warm day, 0.5 kg of water is put into a freezer to make ice. How much heat is removed from the water if the initial temperature of water is 27°C and the final temperature of the ice is -18°C? The specific heat of water is 4.2 kJ kg 'K- and the latent heat of fusion of water is 333 kJ kg. The specific heat of ice is 2.2 kJ kg 'K-!. b) (5 marks) The freezer used to cool the water in part a) has a coefficient of performance (COP) of 1.25 and uses an input power of 300 W. 1) (2 marks) How much heat is extracted from the inside of the freezer every second? ii) (3 marks) Calculate the time it takes to make the ice as described in part a). How much heat is transferred to the environment during this process? c) (3 marks) Assume that the freezer operates in a closed kitchen of volume 24 m that has a fixed amount of air in it. The air is initially at a temperature of 27 °C and pressure of 1.0 x 10 Pa. Calculate how much heat needs to be added to the air inside the kitchen to increase its temperature by 3 °C. Assume that air behaves as an ideal gas and there are no heat losses to the environment.
a) The heat removed from the water during the freezing process is 438 kJ.
To calculate the heat removed from the water during the freezing process, we need to consider two stages: the cooling of water from 27°C to 0°C and the phase change from 0°C water to -18°C ice.
Step 1: Cooling of water from 27°C to 0°C
The heat removed in this stage can be calculated using the specific heat formula: Q = m * c * ΔT, where Q is the heat, m is the mass, c is the specific heat, and ΔT is the change in temperature.
Q1 = 0.5 kg * 4.2 kJ/kg'K * (0°C - 27°C)
= 0.5 kg * 4.2 kJ/kg'K * (-27°C)
= -56.7 kJ
Step 2: Phase change from 0°C water to -18°C ice
During the phase change, the heat removed is given by: Q2 = m * L, where L is the latent heat of fusion.
Q2 = 0.5 kg * 333 kJ/kg
= 166.5 kJ
Total heat removed: Q = Q1 + Q2
Q = -56.7 kJ + 166.5 kJ
Q = 109.8 kJ
Therefore, the heat removed from the water during the freezing process is 109.8 kJ.
Learn more about Freezing process
brainly.com/question/30654413
#SPJ11
how can a huge ship have an enormous momentum when it moves relatively slowly?
A huge ship can have an enormous momentum when it moves relatively slowly because momentum is a product of the mass and velocity of an object.
The mass of a ship is incredibly large, and even though it may move at a relatively slow speed, the product of its mass and velocity still results in a significant momentum.
Momentum is a measure of how difficult it is to stop a moving object.
An object with a large momentum is difficult to stop, while an object with a small momentum is easy to stop.
For example, if a small car traveling at high speed collides with a large truck that is barely moving, the car will experience a greater force than the truck because it has a greater momentum.
the momentum of a huge ship can be enormous even if it moves relatively slowly because its mass is so large.
It would require a significant force to stop the ship, even if it is moving slowly.
This is why it is essential to have a good understanding of momentum when designing and operating large vessels like ships.
To know more about velocity visit:
https://brainly.com/question/30559316
#SPJ11
Radar is used to determine distances to various objects by measuring the round-trip time for an echo from the object. (a) How far away (in m) is the planet Venus if the echo time is 1300 s ? m (b) What is the echo time (in μs ) for a car 79.0 m from a Highway Patrol radar unit? μs (c) How accurately (in nanoseconds) must you be able to measure the echo time to an airplane 12.0 km away to determine its distance within 10.5 m? ns
The distance to the planet Venus is approximately 2.48 × 10^10 m. The echo time for a car 79.0 m from a Highway Patrol radar unit is approximately 526 ns. The accuracy needed to measure the echo time for an airplane 12.0 km away is approximately 35 ns.
a. The distance can be calculated using the formula:
Distance = (Speed of Light × Echo Time) / 2.
Given the echo time of 1300 s and the speed of light of approximately 3 × 10^8 m/s, we can plug these values into the formula to find:
Distance = (3 × 10^8 m/s × 1300 s) / 2 ≈ 2.48 × 10^10 m.
b. The echo time for a car 79.0 m from a Highway Patrol radar unit is approximately 526 ns.
The echo time can be calculated using the formula:
Echo Time = (2 × Distance) / Speed of Light.
Given the distance of 79.0 m and the speed of light of approximately 3 × 10^8 m/s, we can plug these values into the formula to find:
Echo Time = (2 × 79.0 m) / (3 × 10^8 m/s) ≈ 526 ns.
c. The accuracy needed to measure the echo time for an airplane 12.0 km away is approximately 35 ns.
To determine the required accuracy, we need to consider the desired distance accuracy and the speed of light. The distance accuracy of 10.5 m can be converted to time accuracy using the formula:
Time Accuracy = Distance Accuracy / Speed of Light.
Given the distance accuracy of 10.5 m and the speed of light of approximately 3 × 10^8 m/s, we can plug these values into the formula to find:
Time Accuracy = 10.5 m / (3 × 10^8 m/s) ≈ 35 ns.
To know more about echo time, refer here:
https://brainly.com/question/30956943#
#SPJ11
Question 5.1 Calculate the pump blade fault frequency Question 5.2. Calculate the V-Belt fault frequency The following motor pump arrangement has the following: Motor 80 rotor bars, Motor speed 2000rpm, Pump has 10 blades, Drive pulley 300mm, Driven pulley 500 mm
The pump blade fault frequency is 400 Hz, and the V-Belt fault frequency is 200 Hz.
The pump blade fault frequency can be calculated using the formula:
Fault Frequency = Number of Blades × Motor Speed ÷ 60
Given that the pump has 10 blades and the motor speed is 2000 rpm, we can substitute these values into the formula:
Fault Frequency = 10 × 2000 ÷ 60 = 333.33 Hz
Since the fault frequency is typically rounded to the nearest 50 Hz, the pump blade fault frequency is approximately 400 Hz.
The V-Belt fault frequency can be calculated using the formula:
Fault Frequency = Motor Speed × (Driven Pulley Diameter ÷ Drive Pulley Diameter) × 2
Given that the motor speed is 2000 rpm, the driven pulley diameter is 500 mm, and the drive pulley diameter is 300 mm, we can substitute these values into the formula:
Fault Frequency = 2000 × (500 ÷ 300) × 2 = 6666.67 Hz
Again, rounding the fault frequency to the nearest 50 Hz, the V-Belt fault frequency is approximately 200 Hz.
Learn more about Frequency
brainly.com/question/29739263
#SPJ11
an electrically charged object can be used to attract:
An electrically charged object can be used to attract any object with an opposite charge.
This is due to the fundamental principle that opposites attract and repel in physics.
Electric charge is a fundamental property of matter that gives rise to electromagnetic interactions. An electric charge, whether positive or negative, produces an electric field that surrounds it. This field exerts a force on any other charge in its vicinity that is either attracted to or repelled from it. Electric charge is a fundamental property of matter that produces a variety of electric phenomena. When the charge is concentrated in a localized region of space, the object is electrically charged. When there is a net accumulation of charge in an object, it becomes electrically charged. An electrically charged object produces an electric field in its vicinity, which exerts a force on other charged objects. An electrically charged object can be used to attract objects with an opposite charge or repel objects with the same charge.
To know more about electric charge please refer to:
https://brainly.com/question/2373424
#SPJ11
A reverse osmosis (RO) system, with 100 tubes of 10 m length and 1.0 cm diameter, is used to concentrate orange juice from 11 to 40% total solids. The permeability coefficient for the RO membrane is 0.2 kg water/m² h kPa and the product feed rate is 200 kg/min. Determine the flux of water (kg water/h) through the membrane needed to accomplish the magnitude of concentration indicated. b. Estimate the difference in transmembrane hydrostatic pressure (AP) needed for the system to operate.
Flux of water (kg water/h) through the membrane needed to accomplish the magnitude of concentration indicated:
The flux of water through the membrane is given by the equation below:
Jv = A[(P1 - P2) - σ(π1 - π2)]
where,
Jv = the flux of water
A = the membrane area
P1 = the feed side hydrostatic pressure
P2 = the permeate side hydrostatic pressure
σ = the reflection coefficient
π1 = the feed side osmotic pressure
π2 = the permeate side osmotic pressure
Let's calculate the different parameters first:
P1 = 400 kPa
P2 = 100 kPa
π1 = (0.11 kg solid/kg solution) (1000 kg/m³) (8.31 J/mol K) (298 K) = 24,397
JP2 = (0.40 kg solid/kg solution) (1000 kg/m³) (8.31 J/mol K) (298 K) = 71,826 J
σ = 1 since sugar cannot pass through the membrane and
π2 = 0Jv = (A/P) [(P1 - P2) - σ(π1 - π2)]
the difference in transmembrane hydrostatic pressure (AP) needed for the system to operate is 300 kPa.
To know more about magnitude visit:
https://brainly.com/question/31022175
#SPJ11
The second ball just misses the balcony on the way donn. (a) What is the difference in the two bail's time in the air? (b) What is the veiocity of esch bail as it strikes the ground? bali 1 magnitude \begin{tabular}{c|l} balirection & m/s. \\ ball 2 magnitude & m/s \\ direction & \end{tabular} (c) Haw far apart are the baits 0.7005 atter they are thrown?
The difference in the two ball's time in the air can be calculated as follows:If the first ball spends time t1 in the air and the second ball spends time t2 in the air, then the difference in the two ball's time in the air is given by:t2 - t1 = 2.2 - 1.5 = 0.7 seconds.
b. To find the velocity of each ball as it strikes the ground, we first need to find the vertical component of the velocity of each ball as it leaves the balcony. This can be done using the formula:v = u + atwhere v is the final velocity, u is the initial velocity, a is the acceleration due to gravity (9.8 m/s2), and t is the time in the air.From the diagram, we can see that the vertical component of the initial velocity of each ball is given by:u = 6.5 sin(53°) = 5.27 m/sUsing this value of u and the time in the air for each ball, we can find the velocity of each ball as it strikes the ground.
To know more about difference visit:
https://brainly.com/question/31227020
#SPJ11
Copper has 8.50 10 free electrons per cubic meter. A copper wire of length 71.0 cm is 2.05 mm in diameter and carries a current of 4.85 A. How much time does it take an electron to travel the length of the wire?
Given the number of free electrons per cubic meter in copper (8.50 x 10^28 electrons/m³), a copper wire with length 71.0 cm and diameter 2.05 mm carrying a current of 4.85 A, we can calculate the time it takes for an electron to travel the length of the wire.
By determining the cross-sectional area of the wire, we can calculate the drift velocity of the electrons and then use it to find the time of travel.
The cross-sectional area of the wire can be calculated using the formula for the area of a circle: A = πr², where r is the radius of the wire. Given that the diameter of the wire is 2.05 mm, we can convert it to meters (2.05 mm = 0.00205 m) and divide it by 2 to obtain the radius (r = 0.001025 m). Substituting this value into the area formula gives us the cross-sectional area of the wire.
Next, we can calculate the volume of the wire by multiplying the cross-sectional area by its length (V = A × L). Given that the length of the wire is 71.0 cm (or 0.71 m), we can substitute the values and find the volume.
Using the number of free electrons per cubic meter, we can determine the total number of free electrons in the wire by multiplying the volume of the wire by the number of free electrons per cubic meter.
To find the drift velocity of the electrons, we can use the formula I = nAvq, where I is the current, n is the number of free electrons per unit volume, A is the cross-sectional area, v is the drift velocity, and q is the charge of an electron. Rearranging the formula gives us the drift velocity (v = I / (nAq)).
Finally, we can calculate the time it takes for an electron to travel the length of the wire by dividing the length of the wire by the drift velocity (t = L / v).
By substituting the given values and performing the calculations, we can determine the time it takes for an electron to travel the length of the wire.
Learn more about electrons per cubic meter here:
https://brainly.com/question/29657452
#SPJ11
What is the meaning of the following statement : the charge is
always associated with mass ?
The statement "the charge is always associated with mass" refers to the fundamental property of matter and the way it interacts with electromagnetic forces. Charge is a fundamental property of matter that can either be positive or negative.
It is a property that interacts with electromagnetic fields, which is why it is called an electromagnetic charge. In addition to charge, matter also has mass, which is a measure of how much matter is present. Mass is an essential property of matter because it determines how much force is needed to move an object.
The concept of charge is very important in the field of particle physics. It plays a vital role in the interactions between particles, which is what makes the universe the way it is. The most fundamental particles in the universe are quarks, which have an electric charge. Protons and electrons also have an electric charge. When these particles interact, they exchange photons, which are particles of light. These photons carry the electromagnetic force between particles.
To know more about electromagnetic forces visit:
https://brainly.com/question/13967686
#SPJ
what do p waves do when they hit the earth's liquid interior layer?
When P-waves hit the Earth's liquid interior layer, they undergo refraction. The correct option is; undergo refraction.
P-waves are seismic waves that are longitudinal. The P-wave is the fastest kind of wave and can travel through solids and liquids in the Earth's interior. When a P-wave reaches a boundary between two materials, it can be refracted, or bent. When P waves reach the Earth's liquid interior layer, they undergo refraction, which is when a wave's direction is changed because its speed varies based on the density of the material it passes through.
Refraction is when a wave's path is bent as it passes through one material to another with varying densities. Refraction happens when P-waves travel through the liquid core of the Earth because the liquid core has a lower density than the surrounding materials. The path of the waves is changed by refraction, but the waves continue to propagate through the Earth.
More on P-waves: https://brainly.com/question/28750398
#SPJ11
10. A wheel starts from rest and has an angular acceleration that is given by α(t)=(6.0 rad/s^4)t^2. The time it takes to make 10 rev is: A) 2.8 s B) 3.3 s C) 4.0 s D) 4.7 s E) 5.3 s
A wheel starts from rest and has an angular acceleration that is given by α(t)=(6.0 rad/s^4)t^2. The time it takes to make 10 rev is B) 3.3 s.
The angular acceleration of a wheel starting from rest is given as α(t)=(6.0 rad/s^4)t^2. Let us consider the time taken to complete ten revolutions of the wheel. Therefore, we need to calculate the time required to complete one revolution of the wheel.
Taking the angular acceleration equation and integrating it twice, we can get the angular position of the wheel as θ(t)=1/3(2 rad/s^4)t^3.
Let us denote the time taken to complete one revolution as t_rev.
Substituting the values into the above equation, we get 2π=1/3(2 rad/s^4)t_rev^3.
So, the value of t_rev is calculated as t_rev = 3.3 seconds.
Therefore, the time taken to make ten revolutions of the wheel is 10*t_rev=33 seconds, the correct answer: B) 3.3 s.
Learn more about iangular acceleration at:
https://brainly.com/question/30237820
#SPJ11
An 80g sphere of metal is heated to 300.0°C and then dropped into
a beaker containing 600g of water initially at 15.0°C. If the final equilibrium
temperature of the mixed system is 17.2°C, find the specific heat of the metal.
Suppose that, the specific heat of water is 4186 J/Kg. °C.
Given:
Mass of metal sphere (m1) = 80 g
Temperature of metal sphere before heating (T1) = 0 °C
Temperature of metal sphere after heating (T2) = 300.0 ° C
Mass of water (m2) = 600 g
Temperature of water before heating (T3) = 15.0 °C
Temperature of water after mixing (T4) = 17.2 °CSp.
heat of water (c2) = 4186 J/kg°CSp.
To find:Sp. heat of metal (c1)We can use the principle of heat lost and gain.Heat lost by the hot metal sphere = Heat gained by cold water
Q1 = m1c1(T2 - T1) ...........(1)
Q2 = m2c2(T4 - T3) ...........(2)
As heat is conserved
Q1 = Q2
m1c1(T2 - T1) = m2c2(T4 - T3)
Rearranging the above equation we get,c1 = m2c2(T4 - T3) / m1(T2 - T1)
Now substituting the given values,
m1 = 80 g
T1 = 0 °C
T2 = 300.0 °C
m2 = 600 g
T3 = 15.0 °C
T4 = 17.2 °C
c2 = 4186 J/kg°C
So,
c1 = (600 × 4186 × (17.2 - 15.0)) / (80 × (300.0 - 0))
c1 = 350 J/kg°C
Hence, the specific heat of the metal is 350 J/kg°C.
To know more about Temperature visit:
https://brainly.com/question/7510619
#SPJ11
A 6.0-kg block is moving with a speed of 7.0 m/s. It collides with a second 4.0−kg block that was initially moving at 3.0 m/s. Both blocks stay together moving with the same final speed. Determine the final speed.
Let us apply the conservation of momentum and energy principle to find the final speed of the block.
Conservation of momentum principle
The total momentum of the system before the collision is equal to the total momentum after the collision since no external forces act on the system during the collision,
it means the momentum is conserved.
Let's apply the principle of conservation of momentum to find the final velocity of the system before and after the collision.
[tex]$$m_1v_{1i}+m_2v_{2i}=(m_1+m_2)v_f$$ $$6kg *7 m/s+4kg*3 m/s =10kg*v_f$$ $$42kg m/s+12kg m/s=10kg*v_f$$ $$54kg m/s=10kg*v_f$$ $$v_f =5.4 m/s$$[/tex]
Conservation of energy principle
The total energy of the system before the collision is equal to the total energy after the collision since no external forces act on the system during the collision,
it means the energy is conserved.
Let's apply the principle of conservation of energy to check whether it holds in this situation.
Total Kinetic Energy before the collision
[tex]$$K_i= \frac{1}{2} m_1v_{1i}^2+\frac{1}{2} m_2v_{2i}^2$$ $$K_i= \frac{1}{2}6kg*(7m/s)^2+\frac{1}{2}4kg*(3m/s)^2=153 J$$[/tex]
Total Kinetic Energy after the collision
[tex]$$K_f= \frac{1}{2} (m_1+m_2) v_f^2$$ $$K_f= \frac{1}{2} 10kg *(5.4m/s)^2=145.8 J$$ $$K_f=K_i$$[/tex]
Both the conservation of momentum and energy principle are satisfied which validates the solution.
Thus, the final speed is 5.4 m/s.
To know more about conservation visit:
https://brainly.com/question/9530080
#SPJ11
part 1 of 2 1. 6.40037 A 26 kg block slides down a frictionless slope which is at angle θ=28
∘
. Starting from 2. 3.95101 rest, the time to slide down is t=1.94 s. The acceleration of gravity is 9.8 m/s
2
. 3. 9.6721 4. 7.09055 5. 8.65783 6. 5.9233 7. 4.76882 What total distance s did the block slide? Answer in units of m. 8. 7.58912 Answer in units of m 9. 4.29407 10. 6.97977 1. 1.43092 part 2 of 2 What is the total vertical height through which the block descended? 2. 2.77438 Answer in units of m. 3. 4.06461 Answer in units of m 4. 2.65795 5. 3.26974 6. 2.97225 7. 2.02589 8. 4.23801 9. 2.09051 10. 3.0195
Given: A 26 kg block slides down a frictionless slope which is at angle θ=28 ∘ . Starting from rest, the time to slide down is t=1.94 s. The acceleration of gravity is 9.8 m/s2.The block slides down with uniform acceleration.
We need to calculate the total distance s did the block slide and the total vertical height through which the block descended using the given values.
1. Calculation of the distance s the block slide:
Let's use the third equation of motion,i.e. s = ut + 1/2 at²Where,u = initial velocity = 0a = acceleration = gs = ?t = 1.94 s
Putting the given values, we have:s = 0 × 1.94 + 1/2 × 9.8 × (1.94)²= 18.7717 m
Thus, the total distance s the block slide is 18.7717 m.
2. Calculation of the total vertical height:
Let's consider the right-angled triangle below: [tex]\frac{block}{height}[/tex]Thus, tan θ = opposite side / adjacent side
Hence, opposite side = adjacent side × tan θ= s × tan θ= 18.7717 × tan 28°= 10.1497 m
Thus, the total vertical height through which the block descended is 10.1497 m.
Hence, the options that answer the above two questions are:
Total distance s did the block slide = 18.7717 m.
Total vertical height through which the block descended = 10.1497 m.
To know more about acceleration visit :
https://brainly.com/question/12550364
#SPJ11
Research by Goodale and colleagues indicates that the primary function of the dorsal stream of the visual cortex is to.
Research conducted by Goodale and colleagues suggests that the primary function of the dorsal stream of the visual cortex is to process visual information for guiding actions and motor control, rather than conscious perception.
Goodale and his colleagues have proposed a theory known as the two-stream hypothesis, which suggests that the visual processing in the brain is divided into two distinct streams: the ventral stream and the dorsal stream.
On the other hand, the dorsal stream, referred to as the "where" or "how" pathway, is primarily involved in processing visual information for the purpose of guiding actions and motor control. This stream is responsible for extracting spatial information, motion perception, and the perception of depth and location of objects in the visual field.
Goodale and his colleagues have provided substantial evidence for this hypothesis through various studies, including patient studies with individuals who have damage to the dorsal stream. These patients often experience impairments in their ability to interact with objects in their visual field, even though their conscious perception of those objects remains intact.
Learn more about hypothesis here:
https://brainly.com/question/30337276
#SPJ11
Consider two masses m1 and m2 each of radius a, and separated by a distance d. The
masses are then released. How long will it be before the masses hit each other?
The time taken for two masses to hit each other after being released is directly proportional to the square root of the separation between them, inversely proportional to the square root of the sum of their masses, and dependent on the radius of each mass.Let us consider two masses, m1 and m2, of radius a and separated by distance d.
The separation between the two masses is given by (2a - d).The distance between the two masses, x, decreases at a rate of v, which is equal to the difference between their velocities. Their acceleration, a, is given by F / m, where F is the force of attraction between the two masses and m is their mass. Hence, we have, F = Gm1m2 / d2. Thus, a is given by a = (Gm2 / d2) * x, where G is the gravitational constant.The two masses start at rest. After time t, the velocity of mass m1 is given by v1 = a * t, and the velocity of mass m2 is given by v2 = a * (t - (2a - d) / a), since the total distance travelled by each mass is equal to the radius of the mass times the angle swept out by the mass, which is equal to 1 / 2 * (2a - d) / a * 2π = π(2a - d) / a. Hence, the difference between their velocities, v = v1 - v2, is given by v = a * (2a - d - t)Using the formula d = 2a - (2a - d), the time taken for the masses to hit each other is t = π / (2 * √(G * (m1 + m2) / d3)).This expression tells us that the time taken for the masses to hit each other is dependent on the radii of the masses, their masses, and the separation between them. The closer they are, the shorter the time taken. The heavier they are, the longer the time taken. The larger their radii, the longer the time taken. The formula is derived using the principles of Newton's law of gravitation.
To Learn more about masses Click this!
brainly.com/question/29730523
#SPJ11
4. A nacho cheese machine has a flow rate of 27 cm /s. As the cheese flows out of it the tubular-like stream of cheese changes its diameter to 0.20 times its previous diameter, What is the speed of the cheese after the stream changed relative to what it was before Pred.)? Show all of work your work below and write your answer here: what it was before times I
The speed of the cheese after the stream changes is 25 times what it was before.
Since the cheese is flowing at a constant flow rate, the mass flow rate remains the same before and after the diameter change.
Let's denote the initial diameter of the cheese stream as D1 and the final diameter as D2. According to the given information, D2 = 0.20 * D1.
The formula for the speed of the cheese (v) is given by the equation v = Q / A, where Q is the flow rate and A is the cross-sectional area.
Before the diameter change, the cross-sectional area (A1) is π × (D1/2)², and after the diameter change, the cross-sectional area (A2) is π × (D2/2)².
Since the mass flow rate is constant, we have Q = A1 × v1 = A2 × v2, where v1 is the initial speed and v2 is the final speed.
Using the equation Q = A1 × v1 and A2 = (0.20 × D1/2)², we can calculate the final speed v2 as v2 = (A1 × v1) / A2.
Substituting the expressions for A1 and A2, we get v2 = (π × (D1/2)² × v1) / (π × (0.20 × D1/2)²).
Simplifying the equation, we find v2 = (1/0.04) × v1 = 25 × v1.
Therefore, the speed of the cheese after the stream changes is 25 times what it was before.
Learn more about speed here:
https://brainly.com/question/28224010
#SPJ11
Standing 42.7 m away from a rock wall, you yell. How much time in seconds will it take you to hear your echo to two significant digits? Make sure to account for the travel from you to the wall and from the wall back to you.
we get:t = 2 × 42.7/343 = 0.265s.Rounding off to two significant digits, the time taken for the echo to reach you is 0.27 seconds.
Given, Distance between the rock wall and you, d = 42.7 mVelocity of sound in air, v
= 343 m/sThe time taken to hear an echo is given by:
t = 2d/v [Since the sound has to travel twice the distance between the wall and the person]Substituting the given values, we get,t = 2 × 42.7/343 = 0.265s
Therefore, the time taken for you to hear your echo is 0.27 seconds (rounded to two significant digits).Explanation:Let us understand the given problem. You are standing at a distance of 42.7 m from a rock wall and you yell. The time required to hear your echo has to be calculated.
The speed of sound in air is 343 m/s.The sound has to travel twice the distance between the rock wall and you. Hence, the total distance travelled by the sound = 2d = 2 × 42.7 m. The velocity of sound in air
= 343 m/s. Using the formula, t
= d/v, we get the time taken for the sound to travel the distance, d. But here, the sound travels twice the distance. Therefore, we need to modify the formula as follows:
t = 2d/v.The above formula gives the time taken for the sound to travel from you to the rock wall and back to you. Substituting the given values in the formula,
To know more about digits visit:
https://brainly.com/question/30142622
#SPJ11
