Answer:
hydrogen
Explanation:
What is the molarity of an HCl solution if 125 mL is neutralized in a titration by 76.0 mL of 1.22 M KOH?
Answer:
0.74176 M HCl
Explanation:
1) Write out a balanced equation.
KOH + HCl --> KCl + H2O
2) Calculate #mol KOH in 76.0mL needed for the titration.
1.22 mol KOH in 1000mL
x mol KOH in 76.0mL
x = 0.09272 mol KOH
3) Use the balanced equation ratio (from step 1), 1 mol KOH : 1 mol HCl.
0.09272 mol KOH = 0.09272 mol HCl
4) 125mL of the HCl solution was used for the titration, so find the molarity.
0.09272 mol HCl is in 125mL
x mol HCl in 1000mL
x = 0.74176 mol HCL / 1 L
SO... 0.74176 M HCl is the answer.
*hope this helped*
- A Kind Stranger
Which of the following units could not be used to measure density?
O A. Kilograms per liter (kg/L)
B. Grams per milliliter (g/mL)
C. Pounds per cubic inch (lb/in)
D. Grams per cubic centimeter (g/cm3)
Answer: Pounds per Cubic inch(lb/in3)
sonar measures underwater distances by using?
Answer:
By using the speed of sound in water
Explanation:
(Which is about 1500 m/s in sea depending on the sea water density )
Fiona is examining a material. She notices that the material has a dull appearance and feels very brittle.
Fiona is most likely examining a _______
(I'll give brainliest)
"Typical nonmetals have a dull, coloured or colourless appearance; are brittle when solid; are poor conductors of heat and electricity; and have acidic oxides." - Wikipedia
Do metals or nonmetals have the greatest tendency to lose electrons and become positive ions?
Answer:
The metals have the tedency to lose electrons and become positive ions
Explanation:
In order to attain noble gases electronic configuration, metals of group I A lose one electron and II A lose 2 electrons with ionization energy.
What causes a molecule to have a net dipole moment?
A. The presence of only nonpolar bonds in the molecule
B. The presence of Van der Waals forces
C. The presence of a net charge that does not cancel out
D. The presence of both covalent and ionic bonds in the molecule
Answer:
Option C
Explanation:
Dipole moment being ac vector quantity has both magnitude and direction. All bonding forces have dipole moment ranging from partially positive to negative moment.
Net dipole moment is the dipole moment arising after summation of all the existing dipole moments. On the basis of dipole moment it is determined whether the molecule is polar or non polar.
Hence, option c is correct
Answer:c
Explanation:
modern vacuum techniques make it possible to reach a pressure of 1.00 * 10 ^ -10 mm Hg in a laboratory system. what volume in milliliters would 1.00 * 10 ^ 6 molecules of gas occupy at this pressure and standard temp?
Answer:
around 0.283
Explanation:
Icp need help of available
Answer:
True statements: B and C
Explanation:
A is not true NaCl is product
D is not true the reaction occurs
Proper lane placement can include positioning your car...
A. away from other cars.
B. 36 inches from the right or left line.
C. one inch from either lane line.
Proper lane placement can include positioning your car 36 inches from the right or left line. Therefore, option B is correct.
What is lane positioning ?Using different lane positions to make adjustments for potential problems and create larger space between car and problem situations. Lane position is the placement of car in the center, on the right, or on the left of a lane. The width of a lane is twelve feet on most highways or streets.
There are three main positions are lane position 1 is center of lane, lane position 2 is left side, and lane position 3 is right side. Position 2 is left side of lane is for car.
Position 3 is a vehicle placement to the right when a restriction to path of travel or your line of sight occurs. Proper lane placement can include positioning your car 36 inches from the right or left line.
Thus, option B is correct.
To learn more about lane positioning, follow the link;
https://brainly.com/question/11661954
#SPJ2
What is heat of vaporization?
ОА.
It is the heat required to change a substance's temperature by 1°C.
OB.
It is the heat required to change a gram of substance from a solid to a liquid.
Ос.
It is the heat required to change a substance from a solid directly to a gas.
OD.
It is the heat required to change a gram of substance from a liquid to a gas.
O E. It is the heat required to separate one substance into two substances.
Answer:
Your answer is D. It is the heat required to change a gram of substance from a liquid to a gas.
2HNO (ag) +
LMg(s) →
Mg(NO3)2(s)
Helg)
155.0-ml of a solution of 0.75 M HNO3 is combined with 270 g of magnesium. What
volume of hydrogen gas will be produced at STP?
Answer:
The volume occupied by the gas is 1.302 × 10⁻³ m³
Explanation:
2HNO₃(aq) + Mg(s) → Mg(NO₃)₂ + H₂(g)
From the above reaction, we have that 2 moles of HNO₃ combine with 1 mole of Mg to produce 1 mole of Mg(NO₃)₂ and 1 mole of H₂
In the question, we have 155.0 mL of a solution of 0.75 M HNO₃ combining with 270 g of magnesium
Therefore, number of moles of HNO₃ = 0.75×155.0/1000 = 0.11625 moles
[tex]Number \, of \, moles \ of \ magnesium = \frac{Mass \ of \, magnesium}{Molar \, mass \ of \, magnesius} = \frac{270}{24.305} = 11.11 \ moles[/tex]
Therefore, HNO₃ is the limiting reaction, hence;
0.11625 moles of HNO₃ will react with 1/2×0.11625 moles or 0.058125 moles of Mg to produce 0.058125 moles of H₂
Hence since we now know the volume of H₂ produce, we can find the volume occupied at STP by the following universal gas equation relationship;
PV = nRT
Therefore;
[tex]V = \frac{n \times R \times T}{P}[/tex]
Where:
V = Volume of occupied by the gas = Required quantity
n = Number of moles = 0.058125 moles
R = Universal gas constant = 8.3145 J/(mol·K)
T = Temperature of the gas at STP = 273.15 K
P = Pressure of the gas at STP = 1 atm = 101325 Pa
[tex]V = \frac{0.058125 \times 8.3145 \times 273.15}{101325} = 1.302 \times 10^{-3} m^3[/tex]
pls help Photosynthesis is used to produce food for plants in the form of glucose. In the process, oxygen is released. As shown in the diagram, plants require water and carbon dioxide (from the air). What else is required for photosynthesis and what role does it play? A) Light is required to provide energy for photosynthesis. B) ATP is required as an energy source for photosynthesis. C) Glucose is required as an energy source for photosynthesis D) Oxygen is required to split water molecules in photosynthesis.
Answer:
A) light is required
Explanation:
ATP, Glucose, and oxygen are created from the process
CAN SOMEONE HELP ME?!?! IM CONFUSED
Answer: Solar winds have an influence all the way to about 160 AU from the Sun. About how many kilometers is that?
24,000,000,000 km
48,000,000,000 km
240,000,000,000 km
480,000,000,000 km
Explanation:
Write the beta decay equation for the following isotope: 15/6 C?
Answer:
[tex]\rm _{6}^{15}\text{C} \longrightarrow \, _{-1}^{0}\text{e} + \, _{7}^{15}\text{N}[/tex]
Explanation:
The unbalanced nuclear equation is
[tex]\rm _{6}^{15}\text{C} \longrightarrow \, _{-1}^{0}\text{e} + \, ?[/tex]
Let's write the question mark as a nuclear symbol.
[tex]\rm _{6}^{15}\text{C} \longrightarrow \, _{-1}^{0}\text{e} + \, _{Z}^{A}\text{X}[/tex]
The main point to remember in balancing nuclear equations is that the sums of the superscripts and the subscripts must be the same on each side of the equation.
Then
15 = 0 + A, so A = 15 - 0 = 15, and
6 = -1 + Z, so Z = 6 + 1 = 7
Then, your nuclear equation becomes
[tex]\rm _{6}^{15}\text{C} \longrightarrow \, _{-1}^{0}\text{e} + \, _{7}^{15}\text{X}[/tex]
Element 7 is nitrogen, so the balanced nuclear equation is
[tex]\rm _{6}^{15}\text{C} \longrightarrow \, _{-1}^{0}\text{e} + \, _{7}^{15}\text{N}[/tex]
The specific heat capacity of lead is 0.130 J/g-K. How much heat
is required to raise the temperature of 15.0 g of lead from 22.0 °C
to 37.0 °C?
Answer:
Q= 29.2 J
Explanation:
22°C=295K
37°C=310K
Q= mC dT
Q= (15.0 g) *(0.130 J/g-K)* (310 K-295K)
Q= 29.2 J
29.2 J is required to raise the temperature of 15.0 g of lead from 22.0 °C to 37.0 °C.
What is specific heat capacity?The specific heat capacity is defined as the quantity of heat (J) absorbed per unit mass (kg) of the material when its temperature increases by 1 K (or 1 °C), and its units are J/(kg K) or J/(kg °C).
Given data:
22°C=295K
37°C=310K
Applying specific heat capacity formula:
Q= mC dT
Putting all the values in the formula:
Q= (15.0 g) X (0.130 J/g-K) X (310 K-295K)
Q= 29.2 J
Hence, 29.2 J is required to raise the temperature of 15.0 g of lead from 22.0 °C to 37.0 °C.
Learn more about specific heat capacity here:
https://brainly.com/question/1747943
#SPJ2
Which of the following is a chemical reaction?
1- Dropping a sliced orange into a vat of Sodium Dydroxide
2-Cutting a piece of paper into two pieces
3-Filling a balloon with air
4-Freezing liquid Mercury
Answer:
1- Dropping a sliced orange into a vat of Sodium Dydroxide
Explanation:
The other answers (2-4) are only physical changes that don't change any chemical compositions.
What happens when light passes from air into water?
A) The light speeds up
B) The light continues at the same speed
C) The light slows down
D) The light forms a mirage
a. What is the mass in grams of 4.2 mols of FeO2?
According to mole concept, there are 368.928 g mass in 4.2 moles of FeO₂.
What is a mole?Mole is defined as the unit of amount of substance . It is the quantity measure of amount of substance of how many elementary particles are present in a given substance.
It is defined as exactly 6.022×10²³ elementary entities. The elementary entity can be a molecule, atom ion depending on the type of substance. Amount of elementary entities in a mole is called as Avogadro's number.
It is widely used in chemistry as a suitable way for expressing amounts of reactants and products.For the practical purposes, mass of one mole of compound in grams is approximately equal to mass of one molecule of compound measured in Daltons. Molar mass has units of gram per mole . In case of molecules, where molar mass in grams present in one mole of atoms is its atomic mass.
Number of moles=mass/molar mass
Thus, mass=4.2×87.84=368.928 g.
Thus, there are 368.928 g mass in 4.2 moles of FeO₂.
Learn more about moles,here:
https://brainly.com/question/26416088
#SPJ2
A chemist needs 2.00 liters of hydrochloric acid. How many pints is this?
Answer:
4.22675
Explanation:
A flask containing 500 liters of hydrogen gas was collected under a pressure of 980mmHg. What will be the volume if the pressure is changed to 900mmHg?
Answer:
80
Explanation:
im not rlly sure exactly but i think thats the anser
26.9 g of solid lithium is combined with 20.0 grams of nitrogen gas. .
When the reaction is complete, an actual yield of 32.5 grams of solid product is produced.
Need to know how to do it, please help me soon!
Answer:
The theoretical yield of
Li
3
N
is
20.9 g
.
Explanation:
Balanced Equation
6Li(s)
+
N
2
(
g
)
→
2Li
3
N(s)
In order to determine the theoretical yield, we must first find the limiting reactant (reagent), which will determine the greatest possible amount of product that can be produced.
Molar Masses
Li
:
6.941 g/mol
N
2
:
(
2
×
14.007
g/mol
)
=
28.014 g/mol
Li
3
N
:
(
3
×
6.941
g/mol Li
)
+
(
1
×
14.007
g/mol N
)
=
34.83 g/mol Li
3
N
Limiting Reactant
Divide the mass of each reactant by its molar mass, then multiply times the mole ratio from the balanced equation with the product on top and the reactant on bottom, then multiply times the molar mass of
Li
3
N
.
Lithium
12.5
g Li
×
1
mol Li
6.941
g Li
×
2
mol Li
3
N
6
mol Li
×
34.83
g Li
3
N
1
mol Li
3
N
=
20.9 g Li
3
N
Nitrogen Gas
34.1
g N
2
×
1
mol N
2
28.014
g N
2
×
2
mol Li
3
N
1
mol N
2
×
34.83
g Li
3
N
1
mol Li
3
N
=
84.8 g Li
3
N
Lithium produces less lithium nitride than nitrogen gas. Therefore, the limiting reactant is lithium, and the theoretical yield of lithium nitride is
20.9 g
.
Explanation:
NEED HELPPP PLSSSSSSSSSS
Why would the pressure of a sample of gas at a constant volume fall .10 atm?
Answer:
As the temperature of a sample of gas falls from 45.0ºC to 30.0ºC, its pressure falls to 300.
Explanation:
How many Liters are in 17.3 moles of Iron?
Answer:
There are 0.12269 Liters of Iron
Explanation:
First, by means of the molecular weight equation, the grams of iron corresponding to 17.3 moles can be calculated:
[tex]MW=\frac{mass(grams)}{moles}[/tex]
[tex]mass=MW*moles=55.845\frac{g}{mol} *17.3mol=966.119 g[/tex]
Then using the density equation the iron milliters are calculated:
[tex]d=\frac{mass(g)}{volume(mL)}[/tex]
[tex]volume=\frac{mass}{density}=\frac{966.119g}{7.874\frac{g}{mL} } =122.69 mL[/tex]
Milliliters to liters are converted:
122.69 mL = 0.12269 L of Iron.
Answer:
[tex]V_{Fe}=0.125L[/tex]
Explanation:
Hello,
In this case, given the moles of iron, we need to use it atomic mass (55.845 g/mol) and density (7.874 g/cm³) in order to firstly convert from moles to grams and secondly from grams to cubic centimetres:
[tex]V_{Fe}=17.6molFe\times \frac{55.845gFe}{1molFe}*\frac{1cm^3}{7.874gFe}=124.8cm^3[/tex]
Finally, we obtain the volume in litres by:
[tex]V_{Fe}=124.8cm^3*\frac{1L}{1000cm^3} \\\\V_{Fe}=0.125L[/tex]
Best regards.
What is the molariity of a 50.0 mL aqueous solution containing 10.0 grams of table salt, NaCl?
Answer:
3 mol/L
Explanation:
You should know or have the equation to solve for Molarity which is;
M = n/v (M: Molarity) (n: moles of solute) (v: Liters of solute)
You can start off differently but I would start by converting the mL to L. This is your "v" value.
50.0 mL/ 1000 mL = 0.05 L
Now, you have to convert grams to moles in order to solve for molarity (M).
1.) On the periodic table find the molecular weights of Na and Cl.
Na= 22.99 g/mol Cl= 35.45g/mol
2.) Add them together to have their combined molecular weights.
22.99 + 35.45= 58.44 g/mol
3.) Now, you're going to use the "picket fence method" or whichever your teacher taught you to convert from grams to moles. This will be your "n" value. (I cannot show it on here without it looking weird, so my sincere apologies.)
10.0 g/ 58.44 g = 0.17111 mol
4.)You are now going to plug in your answers into the equation for Molarity.
M= 0.17111 mol / 0.05 L = 3.4222
5.) I am sure your professor might be a stickler so for sig figs sake when you multiply or divide use the smallest amount of sig figs you see which is 1. Round 3.4222 to 3 mol/L
Sorry this explanation is long let me know if you need a better more written out sample.
Multiply the following: (1.25 x 10^15) x (3.75 x 10^5).
Answer:
[tex]4.6875x10^20[/tex]
Explanation:
What was the purpose of the Apollo space missions?
to collect rock samples from Mars
to land on Saturn
to collect rock samples from the moon
to land on Jupiter
Answer:
i agree with the above to collect rock samples
Explanation:
took test got 100 best of luck
The purpose of the Apollo space missions was to to collect rock samples from the moon.
What is moon?
The Moon is Earth's only natural satellite. It is the fifth largest satellite in the Solar System and the largest and most massive relative to its parent planet, with a diameter about one-quarter that of Earth (comparable to the width of Australia).The Moon is a planetary-mass object with a differentiated rocky body, making it a satellite planet under the geophysical definitions of the term and larger than all known dwarf planets of the Solar System.
It lacks any significant atmosphere, hydrosphere, or magnetic field. Its surface gravity is about one-sixth of Earth's at 0.1654 g, with Jupiter's moon Io being the only satellite in the Solar System known to have a higher surface gravity and density.
Learn more about moon,here:
https://brainly.com/question/30653068
#SPJ3
Static electricity is
a closed conducting path
when electrons move easily through objects
build up of electrical charges by friction
5.6 M KCl has 600. mL of water. How many grams are in this solution?
Answer:
250.656
Explanation:
find no of moles in the 600ml=3.36,find molar mass of kcl(35.5+39,if 1mole=74.6g what about 3.36moles
SCENARIO:
A species of rabbits lives on both sides of a small stream. They can move across the stream by jumping or wading but they cannot swim. A flood caused the stream to widen into a permanent river. The rabbits become 2 groups, one on each side of the river. Being unable to swim, they could not cross the river. After many years, the climate changed so that on the northern side of the river the temperatures were consistently lower than on the southern side of the river.
1. What will happen to the members on each side of the river with unfavorable traits for their climate?
2. What event isolated the rabbits?
3. If the river and climate conditions remain the same as described above, what will happen to the original species of rabbit?
4. Why?
5. What type of isolation is represented in this scenario?
6. Could a new species form? Why?
{i need to answer all the questions help}
Hello!
Let's start:
1. The members on each side of the river with unfavorable traits for their climate will pass away, manage to produce offspring with favorable traits, or try their best to adapt.
2. A flood isolated the rabbits.
3. If the river and climate conditions remain the same as described above, the original species of rabbit will produce offspring that have favorable traits and eventually most of the rabbits will have those traits.
4. Genetic variation allows different genes to form, and since natural selection is the survival of the fittest, those that were born with favorable traits will survive and reproduce.
5. Geographic isolation.
6. A new species could form because there is no guarantee that the rabbits have the traits necessary to survive. If one with them reproduces, then there's a chance that a new species will be created eventually.
I hope I helped! Feel free to message me or leave a comment below if you need me to explain anything.
