1) The 3 kg brick has more mass, so it will have more kinetic energy.
2) Gravity does not do more work on one brick compared to the other.
1) The 3 kg brick has more kinetic energy than the 2 kg brick when it hits the bottom of the bridge because kinetic energy is directly proportional to mass. The formula for kinetic energy is KE=1/2mv², where m is the mass of the object and v is its velocity. Since both bricks are dropped from the same height and experience the same acceleration due to gravity, they will have the same velocity when they hit the bottom. However, the 3 kg brick has more mass, so it will have more kinetic energy.
2) Gravity does the same amount of work on both bricks because they both fall the same distance and experience the same force of gravity. Work is defined as force times distance, so in this case, the force of gravity is the same for both bricks and the distance they fall is also the same. Therefore, gravity does not do more work on one brick compared to the other.
For more such questions on Gravity, click on:
https://brainly.com/question/940770
#SPJ8
If the result of your calculation of a quantity has Si units of kg • m/(s2.C), that quantity could be Select one: A. an electric field strength. B. an electric potential difference. C. a dielectric constant. D. an electric potential energy. E. a capacitance
If the result of your calculation of a quantity has SI units of kg·m/(s²·C), that quantity could be an electric field strength. The electric field strength (E) is defined as the force per unit charge acting on an electric charge. Option (A) is correct.
It is a vector quantity with units of newtons per coulomb (N/C) or volts per meter (V/m). The formula to calculate electric field strength is given as E = F/q, where F is the force acting on the charge and q is the magnitude of the charge.The SI unit of force is the newton (N), and the SI unit of charge is the coulomb (C). Therefore, the units of electric field strength can be written as N/C or V/m. The given SI units of kg·m/(s²·C) can be rearranged to N/C. This confirms that the quantity being calculated is electric field strength.Other options such as electric potential difference, dielectric constant, electric potential energy, and capacitance have different SI units. Electric potential difference has SI units of volts (V), dielectric constant has no units, electric potential energy has SI units of joules (J), and capacitance has SI units of farads (F). Therefore, the answer to this question is option A.
To know more about electric field visit :
https://brainly.com/question/3405913
#SPJ11
Which of the following pairs represents a medium frequency band and its common use?
Select one:
a. 3-30 MHz, CB and shortwave radio
b. 300 KHz-3MHz, AM radio
c. 144-174 MHz, TV channels
d. 30-300 KHz, cordless phones
The frequency range of 144-174 MHz represents a medium frequency band commonly used for TV channels.
a. 3-30 MHz, CB and shortwave radio: This frequency range is considered high frequency (HF) band and is commonly used for Citizens Band (CB) radio communication and shortwave radio broadcasting.
b. 300 KHz-3 MHz, AM radio: This frequency range is known as the medium frequency (MF) band and is used for AM (Amplitude Modulation) radio broadcasting.
c. 144-174 MHz, TV channels: This frequency range falls under the very high frequency (VHF) band and is commonly used for television (TV) broadcasting.
d. 30-300 KHz, cordless phones: This frequency range is part of the low frequency (LF) band and is not typically used for cordless phones. Cordless phones commonly operate in higher frequency ranges, such as the 900 MHz or 2.4 GHz bands.
Therefore, the correct pair representing a medium frequency band and its common use is option c: 144-174 MHz, TV channels.
To know more about frequency range, click here:
https://brainly.com/question/30647284
#SPJ11
calculate the amount of work done to move 1 kg mass from the surface of the earth to a point 10⁵ km from the centre of the earth
The quantum of work done to move a 1 kg mass from the face of the earth to a point 10 ⁵ km from the centre of the earth is4.92 x 10 ⁸J.
The quantum of work done to move 1 kg mass from the face of the earth to a point 10 ⁵ km from the centre of the earth can be calculated using the gravitational implicit energy formula.
The gravitational implicit energy is the quantum of work done by an external force in bringing an object from perpetuity to a point in space where it can be told by graveness. When an object is moved from the face of the earth to a point 10 ⁵ km from the centre of the earth, the gravitational implicit energy of the object increases.
The formula for gravitational implicit energy is given by U = - GMm/ r where U is the gravitational implicit energy G is the universal gravitational constant M is the mass of the earth m is the mass of the object r is the distance between the object and the centre of the earth.
We know that the mass of the object is 1 kg, the mass of the earth is and the distance from the centre of the earth to a point 10 ⁵ km down is Plugging these values into the formula, we get thus, the quantum of work done to move a 1 kg mass from the face of the earth to a point 10 ⁵ km from the centre of the earth is 4.92 x 10 ⁸J.
the mass of the earth is [tex]5.97 * 10^2^4 kg[/tex],
and the distance from the centre of the earth to a point 10⁵ km away is:
[tex]= 6.38 * 10^6 + 10^5 km[/tex]
[tex]= 6.48 * 10^6 km[/tex]
[tex]= 6.48 * 10^9 m[/tex].
Plugging these values into the formula, we get
[tex]U = -6.67 * 10^-^1^1 * 5.97 * 10^2^4 * 1 / 6.48 * 10^9[/tex]
[tex]= -4.92 * 10^8 J[/tex]
Therefore, the amount of work done to move a 1 kg mass from the surface of the earth to a point 10⁵ km from the centre of the earth is 4.92 x 10⁸ J.
For more such questions on work, click on:
https://brainly.com/question/8119756
#SPJ8
the wavelength of an electromagnetic wave is measured to be 0.067 m. (a) what is the frequency of the wave?
The frequency of the electromagnetic wave is 4.48 × 10⁹ Hz
The wavelength of an electromagnetic wave is measured to be 0.067 m. Therefore, we have to determine the frequency of the wave
The speed of light is constant in a vacuum, and it is represented by c.
The speed of light in a vacuum is 2.998 × 10⁸ m/s.
According to the formula for electromagnetic waves: v = fλwhere:v = the speed of lightf = frequencyλ = wavelength
Given that the wavelength of the electromagnetic wave is 0.067m, we can determine its frequency using the above formula.v = fλ⟹f = v/λ
Substitute the values into the above formula :f = 2.998 × 10⁸/0.067m = 4.48 × 10⁹ Hz
Therefore, the frequency of the wave is 4.48 × 10⁹ Hz.
In conclusion, the frequency of the electromagnetic wave is 4.48 × 10⁹ Hz
To know more about electromagnetic wave visit:
brainly.com/question/29774932
#SPJ11
A tank is filled with an ideal gas at 400 degrees K and pressure of 1.00 atm.
The tank is heated until the pressure of the gas in the tank doubles. What is the temperature of the gas?
The temperature of the gas after the pressure has doubled is 800 K.
Given that a tank is filled with an ideal gas at 400 K and pressure of 1.00 atm. The tank is heated until the pressure of the gas in the tank doubles.
The ideal gas law can be used to solve the problem.
The ideal gas law states that PV=nRT, where P is the pressure of the gas, V is the volume of the gas, n is the number of moles of the gas, R is the ideal gas constant, and T is the temperature of the gas. Since the gas is an ideal gas, it follows that the number of moles of the gas is constant.
We can therefore write that P1V1/T1 = P2V2/T2, where P1 = 1.00 atm, V1 is the initial volume of the gas, T1 = 400 K, P2 = 2.00 atm, and V2 is the final volume of the gas.
Rearranging the equation, we get T2 = T1P2V1/P1V2. Since V2 = V1/2, we can substitute this into the equation to obtain T2 = 400 K * 2.00 atm * V1/(1.00 atm * V1/2) = 800 K.
The temperature of the gas after the pressure has doubled is 800 K.
To know more about ideal gas visit:
brainly.com/question/30236490
#SPJ11
when its 80 kwkw engine is generating full power, a small single-engine airplane with mass 750 kgkg gains altitude at a rate of 2.5 m/sm/s.
When the 80 kW engine of the small single-engine airplane is generating full power, the airplane with a mass of 750 kg gains altitude at a rate of 2.5 m/s.
The power generated by the engine is equal to the rate of work done, which is given by the equation Power = Force × Velocity.
In the case of the airplane gaining altitude, the force is equal to the weight of the airplane, which is given by Weight = mass × gravitational acceleration.
Assuming the gravitational acceleration is approximately 9.8 m/s², we can calculate the weight of the airplane. Then, by rearranging the power equation, we can solve for the velocity.
By substituting the known values of power (80 kW), weight (mass × gravitational acceleration), and the given altitude rate (2.5 m/s) into the equations, we can determine the velocity at which the airplane is climbing.
To know more about ,work done, click here https://brainly.com/question/32263955
#SPJ11
Following is the complete answer: When its 80 kW engine is generating full power, a small single-engine airplane with mass 750 kg gains altitude at a rate of 2.5 m/s. Part A What fraction of the engine power is being used to make the airplane climb? (The remainder is used to overcome the effects of air resistance and of inefficiencies in the propeller and engine.) Express your answer as a percentage to two significant figures.
A fast elevator starts from rest and is moving upward with a constant acceleration of a=4m/s. At 1-0 a bolt in the elevator ceiling h=3m above the elevator floor works loose and falls down.(a) How long does it take the bolt to reach the floor? (b)What is the velocity of the bolt relative to the elevator,as it hits the floor?cWhat is the velocity of'the bolt relative to the ground.as it hits the floor?d Relative to the ground,how far has the bolt traveled?
It takes the bolt (a) to reach the floor in 0.75 seconds. (b) The velocity of the bolt as it hits the floor, is 3 m/s downward. (c) The velocity of the bolt, is 3 m/s downward. (d) Relative to the ground, a distance of 1.125 meters.
Determine the time it takes for the bolt to reach the floor, we can use the equation of motion: h = (1/2)at², where h is the distance traveled, a is the acceleration, and t is the time. Plugging in the values, we find t = √(2h/a) = √(2(3 m)/(4 m/s²)) = 0.75 s.
The velocity of the bolt relative to the ground is the sum of the elevator's velocity (which is increasing at a constant rate) and the velocity of the bolt relative to the elevator.
Since the elevator starts from rest and has a constant acceleration, its velocity is given by v = at = 4 m/s² * 0.75 s = 3 m/s downward.
Therefore, the velocity of the bolt relative to the ground is also 3 m/s downward.
The distance traveled by the bolt relative to the ground, we can use the equation of motion: d = v₀t + (1/2)at², where v₀ is the initial velocity. Since the bolt starts from rest relative to the ground, v₀ = 0.
Plugging in the values, we find d = (1/2)at² = (1/2)(4 m/s²)(0.75 s)² = 1.125 meters.
To know more about velocity, refer here:
https://brainly.com/question/16379705#
#SPJ11
The magnetic field at the center ofaolenoid L-55cm in length is »-046 T wheuanent of ,.65 Atm through the solenold wire. t Status re for vlew Status D A solenoid. The expression should be in terms of the given variables. 50% Part (a) Solve the formula fr the magnetic field near the center of a long, tightly wound solenoid for the number of turns.
A solenoid is a cylindrical coil of wire, usually made of copper or another electrically conductive material, used to produce a magnetic field when a current flows through it.
The formula for the magnetic field near the center of a long, tightly wound solenoid for the number of turns can be derived by using the formula of magnetic field on the axis of the solenoid given by;
B = μ0nI / L,
Given that
B = -0.046 T,
L = 55 cm = 0.55 m and
I = 0.65 A, and substituting the values in the formula above, we get;
-0.046 T = μ0n(0.65 A) / 0.55 mn(μ0 / 0.55)
= -0.046 T / (0.65 A) n
= 5000 / L.
To know more about solenoids, visit:
https://brainly.com/question/21842920
#SPJ11
find u, v , u , v , and d(u, v) for the given inner product defined on rn. u = (−1, 2, 1, 0), v = (2, 1, 0, −1), u, v = u · v
Let's first recall the formula for finding the Euclidean inner product of two vectors u and v in Rn. The formula is as follows:`u.v = u1v1 + u2v2 +...+ unvn`Using the given vectors u = (−1, 2, 1, 0) and v = (2, 1, 0, −1).
let's calculate u.v:`
u.v = (-1)×2 + 2×1 + 1×0 + 0×(-1)
= -2 + 2 + 0 + 0 = 0`
Therefore, we have `u.v = 0`.Now, let's find u, v , u , v , and d(u, v). We can use the following formulas to calculate these values:`|u| = sqrt(u.u)``|v| = sqrt(v.v)``u = u / |u|``v = v / |v|``d(u, v) = |u - v|`where `|u|` is the magnitude of vector u, `|v|` is the magnitude of vector v, `u` is the unit vector of u, `v` is the unit vector of v, and `d(u, v)` is the distance between u and v.Now, let's calculate these values for the given vectors.
u = (-1, 2, 1, 0)`|u|
[tex]= sqrt((-1)^2 + 2^2 + 1^2 + 0^2)[/tex]
= sqrt(6)`
Therefore, `u = (-1/sqrt(6), 2/sqrt(6), 1/sqrt(6), 0)`v
= (2, 1, 0, −1)`|v|
[tex]= sqrt(2^2 + 1^2 + 0^2 + (-1)^2)[/tex]
= sqrt(6)`
Therefore, `v = (2/sqrt(6), 1/sqrt(6), 0, -1/sqrt(6))`Now, let's calculate the distance between
u and v.d(u, v) = |u - v|`
= [tex]sqrt((-1/sqrt(6) - 2/sqrt(6))^2 + (2/sqrt(6) - 1/sqrt(6))^2 + (1/sqrt(6) - 0)^2 + (0 + 1/sqrt(6))^2)[/tex]
`= `sqrt((-3/sqrt(6))^2 + (1/sqrt(6))^2 + (1/sqrt(6))^2 + (1/sqrt(6))^2)`
= [tex]`sqrt(11/6)`Therefore, `d(u, v) = sqrt(11/6)[/tex]`.So, we have:
`u = (-1/sqrt(6), 2/sqrt(6), 1/sqrt(6), 0)v
= (2/sqrt(6), 1/sqrt(6), 0, -1/sqrt(6))u.v
= 0d(u, v)
= sqrt(11/6)`
For more information on Euclidean inner product visit:
brainly.com/question/32582940
#SPJ11
A hollow spherical shell with mass 2.05 kgkg rolls without slipping down a slope that makes an angle of 30.0 ∘∘ with the horizontal.
Find the minimum coefficient of friction μμmu needed to prevent the spherical shell from slipping as it rolls down the slope.
The minimum coefficient of friction needed to prevent the spherical shell from slipping as it rolls down the slope is 0.31.
Mass of hollow spherical shell, m = 2.05 kg. Angle of slope with the horizontal, θ = 30°. The forces acting on the spherical shell are: Weight, W = mg. Normal force, N = mg cosθForce parallel to the slope, f = mg sinθ. Force of friction, f'. Let R be the radius of the spherical shell. For the shell to not slip on the slope, the force of friction should be equal to the force parallel to the slope and acting on the shell.
Therefore, we have; f' = f (Minimum coefficient of friction needed)mg sinθ = f' = μNμ = (mg sinθ) / (mg cosθ)μ = tanθμ = tan30°μ = 0.31. Hence, the minimum coefficient of friction needed to prevent the spherical shell from slipping as it rolls down the slope is 0.31.
Learn more about friction here:
https://brainly.com/question/13000653
#SPJ11
how to calculate the distance between a sensor and an electric harge
In order to calculate the distance between a sensor and an electric charge, you need to know the electric field strength produced by the charge and the sensitivity of the sensor to that field strength. The calculation involves using Coulomb's Law to find the electric field strength and then using the inverse square law to determine the distance.
Coulomb's Law states that the force between two charges is directly proportional to the product of their charges and inversely proportional to the square of the distance between them. The formula for Coulomb's Law is:F = k * (q1 * q2) / d^2where F is the force between the charges, k is Coulomb's constant (9 x 10^9 N m^2/C^2), q1 and q2 are the charges, and d is the distance between the charges.The electric field strength produced by the charge is given by:E = F / q2where E is the electric field strength and q2 is the test charge (the charge on the sensor).To calculate the distance between the sensor and the charge, you can use the inverse square law, which states that the intensity of a field (in this case, the electric field) is inversely proportional to the square of the distance from the source. The formula for the inverse square law is:I = I0 * (d0 / d)^2where I is the intensity of the field at distance d, I0 is the intensity of the field at distance d0, and d0 is a reference distance (usually chosen to be 1 meter). Rearranging this equation, we get:d = sqrt(I0 / I) * d0So to calculate the distance between the sensor and the charge, you need to first find the electric field strength at the sensor and the electric field strength at a reference distance (e.g. 1 meter). Then you can use the inverse square law to calculate the distance between the sensor and the charge.
Learn more about sensor at
brainly.com/question/15272439
#SPJ11
PLEASE ANSWER PART A, B, and C
A child slides down a hill on a toboggan with an acceleration of 2.0 m/s².
Part A If she starts at rest, how far has she traveled in 1.0 s? Express your answer using two significant figures. VE ΑΣ
The child travels a distance of 0.75 m, 6.0 m, and 13.5 m in 1.0 s, 2.0 s, and 3.0 s, respectively.
To calculate the distance traveled, we can use the equation of motion: s = ut + 0.5at², where s is the distance traveled, u is the initial velocity (which is zero in this case), a is the acceleration, and t is the time.
For 1.0 s:
s = 0 + 0.5 × 1.5 × (1.0)² = 0.75 m (rounded to 2 significant figures).
For 2.0 s:
s = 0 + 0.5 × 1.5 × (2.0)² = 6.0 m (rounded to 2 significant figures).
For 3.0 s:
s = 0 + 0.5 × 1.5 × (3.0)² = 13.5 m (rounded to 2 significant figures).
Therefore, the child travels 0.75 m, 6.0 m, and 13.5 m in 1.0 s, 2.0 s, and 3.0 s, respectively.
To know more about distance, refer here:
https://brainly.com/question/30145106#
#SPJ11
In the greenhouse effect, far infrared radiation is earth's surface and absorbed and reemitted by gases in the atmosphere. These gases have _____ in concentration over the past century.
a. Increased
b. Decreased
c. Remained constant
d. Varied unpredictably
In the greenhouse effect, far infrared radiation is earth's surface and absorbed and reemitted by gases in the atmosphere. The issue of global warming has received a lot of attention and has prompted a lot of research to better understand its impacts and how we can mitigate it. Therefore, the correct answer is (a) increased.
The greenhouse effect is defined as a phenomenon in which the atmosphere of the earth traps the sun's warmth on the surface of the planet. It is known that far-infrared radiation is emitted by the Earth's surface and absorbed and re-emitted by gases present in the atmosphere. These gases include water vapor, carbon dioxide, and methane, among others.
The concentration of these gases in the atmosphere has increased over the past century. a. Increased The amount of carbon dioxide in the atmosphere, for example, has increased by over 30% in the last 100 years.
This rise in greenhouse gases has contributed to global warming, as the Earth's temperature rises in response to the additional trapped heat. As a result, the issue of global warming has received a lot of attention and has prompted a lot of research to better understand its impacts and how we can mitigate it. Therefore, the correct answer is (a) increased.
To know more about Radiation visit :
https://brainly.com/question/29071039
#SPJ11
If the intensity of sound is increased by a factor of 30 , by how many decibels is the sound level increased ?
a. 12 dB
b. 14.77 dB
c. 10 dB
d. 13 dB
By how many decibels is the sound level increased if the intensity of sound is increased by a factor of 30?The sound level is increased by 15 dB when the intensity of sound is increased by a factor of 30.
The relation between sound intensity (I) and sound level (L) is given by:L = 10 log (I/I0)where I0 is the threshold of hearing, which is the reference intensity level.Using this equation, we can find the increase in sound level when the intensity is increased by a factor of 30 as follows:Let L1 be the original sound level and I1 be the original intensity level. Let L2 be the new sound level and I2 be the new intensity level. Then we have:L2 = 10 log (I2/I0)L1 = 10 log (I1/I0)Since the intensity is increased by a factor of 30, we have:I2 = 30 I1Substituting this into the equation for L2, we get:L2 = 10 log (30 I1/I0)L2 = 10 (log 30 + log (I1/I0))L2 = 10 (1.477 + L1)Note that log 30 = 1.477 (approx).Therefore, the sound level is increased by 10 (1.477) = 14.77 dB when the intensity is increased by a factor of 30.
Sound level is a measure of the intensity of sound and is expressed in decibels (dB). Decibels are used because the human ear is sensitive to sound over a wide range of intensities, from the threshold of hearing to the threshold of pain. The decibel scale is logarithmic, which means that a small increase in intensity is represented by a large increase in sound level. For example, an increase in sound level from 60 dB to 70 dB represents a ten-fold increase in intensity.Therefore, the sound level will increase by a certain amount. We can use the relation between sound intensity and sound level to find out how much the sound level will increase.Let L1 be the original sound level and I1 be the original intensity level. Let L2 be the new sound level and I2 be the new intensity level. Then we have:L2 = 10 log (I2/I0)L1 = 10 log (I1/I0)Since the intensity is increased by a factor of 30, we have:I2 = 30 I1Substituting this into the equation for L2, we get:L2 = 10 log (30 I1/I0)L2 = 10 (log 30 + log (I1/I0))L2 = 10 (1.477 + L1)Note that log 30 = 1.477 (approx).Therefore, the sound level is increased by 10 (1.477) = 14.77 dB when the intensity is increased by a factor of 30.
To know more about decibels visit :-
https://brainly.com/question/29068945
#SPJ11
farmer has 7000 meters of fencing, and wants to enclose a rectangular plot that borders on a river. if farmer does not fence the side along the river, what is the largest area that can be enclosed? The largest area that can be enclosed is SQUARE METER
The largest area that can be enclosed is 1,221,250 square meters.
Let's assume that the length and width of the rectangular plot are 'L' and 'W', respectively. There are two widths and two lengths with fencing. We know that one of the lengths will be equal to the length of the other side along the river.
Therefore, we can have the following equation:
2L + W = 7000 - L, which can be simplified as:
3L + W = 7000 (Equation 1)
Also, the area of the rectangular plot can be expressed as:
L x W (Equation 2)
Now, we need to maximize the area of the plot by substituting Equation 1 into Equation 2.
L x W = L x (7000 - 3L)
Simplifying the above equation, we get:
L² - 3500L + area = 0 (Equation 3)
area = L x (7000 - 3L)
As we want to maximize the area, we need to find the maximum value of Equation 3. By solving this equation using the quadratic formula, we get:
L = 1750 meters area = 1,221,250 square meters
Therefore, the largest area that can be enclosed is 1,221,250 square meters.
To know more about maximizing the area visit:
https://brainly.com/question/32212594
#SPJ11
A chinook salmon, which is a type of fish, has a maximum underwater speed of 3.58 m , but it can jump out of water with a speed of 6.26 m . To move upstream past a waterfall the salmon does not need to jump to the top of the fall, but only to a point in the fall where the water speed is less than 3.58 m ; it can then swim up the fall for the remaining distance. Because the salon must make forward progress in the water, let’s assume it can swim to the top if the water speed is 3.00 m or less. Assume the water has a horizontal speed of 1.50 m as it passes over the top ledge of the waterfall.
D) If the salmon is forced to jump so its body is at an angle that matches the velocity of the water that it enters (as shown in the video), what is the maximum height of the waterfall?
A Chinook salmon, which is a type of fish, has a maximum underwater speed of 3.58 m/s, but it can jump out of water with a speed of 6.26 m/s.
To move upstream past a waterfall the salmon does not need to jump to the top of the fall, but only to a point in the fall where the water speed is less than 3.58 m/s; it can then swim up the fall for the remaining distance. Because the salmon must make forward progress in the water, let’s assume it can swim to the top if the water speed is 3.00 m/s or less. Assume the water has a horizontal speed of 1.50 m/s as it passes over the top ledge of the waterfall. The maximum height of the waterfall when the salmon is forced to jump so its body is at an angle that matches the velocity of the water that it enters can be determined.
As the salmon swims up the waterfall, it will experience a force of the stream's speed. The salmon is only able to move upstream if it swims faster than the stream. Assume the water has a horizontal speed of 1.50 m/s as it passes over the top ledge of the waterfall. Because the salmon must make forward progress in the water, let’s assume it can swim to the top if the water speed is 3.00 m/s or less.Thus, the speed of the salmon relative to the waterfall when it leaps from the water is:[tex]v = 6.26 m/s - 1.50 m/s = 4.76 m/s[/tex]According to the problem statement, the salmon can swim upstream if the water speed is 3.00 m/s or less. Therefore, if the salmon is moving at 4.76 m/s relative to the water, the salmon can swim upstream if the water speed is[tex]v_w = 4.76 m/s - 3.00 m/s = 1.76 m/s[/tex]To determine the maximum height of the waterfall, we must determine the height above which the water has a speed of 1.76 m/s. Therefore, the maximum height of the waterfall when the salmon is forced to jump so its body is at an angle that matches the velocity of the water that it enters is approximately 0.16 meters.
To know more about underwater speed visit :-
https://brainly.com/question/2611546
#SPJ11
find the frequency in terahertz of visible light with a wavelength of 621 nm in vacuum.
The frequency of visible light with a wavelength of 621 nm in vacuum is approximately 483.3 THz.
Visible light is electromagnetic radiation, which means it has both electric and magnetic components and moves at the speed of light. It has a wavelength between 400 to 700 nanometers (nm) and a frequency range between 405 THz to 790 THz.
The formula to find the frequency of electromagnetic waves is:
[tex]f = c / λ[/tex]
Where, f is the frequency of the wave,c is the speed of light in vacuum, andλ is the wavelength of the wave.
In the given question, the wavelength of visible light is 621 nm. Therefore, the frequency of visible light with a wavelength of 621 nm in vacuum can be calculated as:
f = c / λ
= (3 x 10^8 m/s) / (621 x 10^-9 m)
= 4.833 x 10^14 Hz
= 483.3 THz
Thus, the frequency of visible light with a wavelength of 621 nm in vacuum is approximately 483.3 THz.
To learn more about frequency visit;
https://brainly.com/question/29739263
#SPJ11
when an object is placed 32.5 cm in front of a convex spherical mirror, a virtual image forms 11.5 cm behind the mirror. determine the mirror's focal length in cm and the magnification.
The absolute value of the magnification (0.354) tells us that the image is 0.354 times the size of the object (reduced in size).
When an object is placed 32.5 cm in front of a convex spherical mirror, a virtual image forms 11.5 cm behind the mirror. The magnification and the mirror's focal length can be determined using the following formula:
1/f = 1/do + 1/di, Where, f = focal length, do = object distance, and di = image distance
Given: do = -32.5 cm (negative sign indicates object is placed in front of the mirror)di = -11.5 cm (negative sign indicates the image is virtual)Using the above formula:
1/f = 1/-32.5 + 1/-11.51/f = -0.0308f = -32.45 cm (the negative sign indicates that it is a convex mirror, which has a negative focal length)
Therefore, the mirror's focal length is 32.45 cm. The magnification can be determined using the formula:m = -di/do Where, m = magnification, do = object distance, and di = image distance
Given:do = -32.5 cmdi = -11.5 cm
Using the above formula:
m = -(-11.5)/(-32.5)m = 0.354If the magnification is positive, the image is upright, and if it is negative, the image is inverted. In this case, the magnification is negative, which means the image is inverted.
To know more about magnification visit:
https://brainly.com/question/21370207
#SPJ11
A cylinder is inscribed in a right circular cone of height 6.5 and radius (at the base) equal to 4.5. What are the dimensions of such a cylinder which has maximum volume?
Radius ?
Height ?
The dimensions of the cylinder with maximum volume are:Radius = 4.5, Height = 6.5
the cylinder is inscribed in the cone, the height of the cylinder is equal to the height of the cone, which is 6.5.To find the radius of the cylinder, we need to consider similar triangles formed by the cone and the cylinder. The radius of the cone at the base is 4.5, and the height of the cone is 6.5. The radius of the cylinder will be a fraction of the radius of the cone: By using the similar triangles, we can set up the following equation: r / 4.5 = h / 6.5.
Simplifying the equation, we get: r = (4.5 * h) / 6.5
Since we know the height of the cylinder is equal to the height of the cone, we can substitute h = 6.5 into the equation:
r = (4.5 * 6.5) / 6.5. r = 4.5 .Therefore, the radius of the cylinder is 4.5.The height of the cylinder is the same as the height of the cone, which is 6.5. So, the dimensions of the cylinder with maximum volume are:
Radius = 4.5, Height = 6.5
To learn more about cylinder:
https://brainly.com/question/10048360
#SPJ11
PART H,I and J only pls
PART H,I and J only pls
A cylinder of volume 0.320 m³ contains 12.0 mol of neon gas at 22.8°C. Assume neon behaves as an ideal gas. (a) What is the pressure of the gas? 9.22e4 Pa (b) Find the internal energy of the gas. 4.
A cylinder of volume 0.320 m³ contains 12.0 mol of neon gas at 22.8°C. Assume neon behaves as an ideal gas. Therefore,
(a) The pressure is 9.22e4 Pa.
(b) Internal energy is 4.42e4 J.
(c) Work done is -6.27e4 J.
(d) Temperature is 924 K
(e) Internal energy when volume is 1 is 1.41e5 J.
Here is the explanation :
(a) The pressure of the gas can be calculated using the ideal gas law equation:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.
Given:
Volume (V) = 0.320 m³
Number of moles (n) = 12.0 mol
Temperature (T) = 22.8°C = 22.8 + 273.15 = 296.95 K
Plugging in the values:
P * 0.320 = 12.0 * R * 296.95
Simplifying and solving for P:
[tex]\[P \approx \frac{12.0 \times R \times 296.95}{0.320}\][/tex]
Using the value of the ideal gas constant, R = 8.314 J/(mol·K), we can calculate the pressure P:
[tex]\[P \approx \frac{12.0 \times 8.314 \times 296.95}{0.320} \approx 9.22 \times 10^{4} \text{ Pa}\][/tex]
Therefore, the pressure of the gas is approximately 9.22 × 10^4 Pa.
(b) The internal energy of an ideal gas can be given by the equation:
[tex]\begin{equation}U = \frac{3}{2}nRT[/tex]
where U is the internal energy, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.
Given the same values as before, we can substitute them into the equation:
[tex]\[U = \frac{3}{2} \times 12.0 \times 8.314 \times 296.95 \approx 4.42 \times 10^{4} \text{ J}\][/tex]
Therefore, the internal energy of the gas is approximately 4.42 × 10^4 J.
(c) The work done on the gas during an expansion at constant pressure can be calculated using the equation:
W = P * ΔV
where W is the work done, P is the pressure, and ΔV is the change in volume.
Given:
Initial volume (V₁) = 0.320 m³
Final volume (V₂) = 1.000 m³
Pressure (P) = 9.22 × 10⁴ Pa
ΔV = V₂ - V₁ = 1.000 m³ - 0.320 m³ = 0.680 m³
Plugging in the values:
[tex]\[W = (9.22 \times 10^{4} \text{ Pa}) \times (0.680 \text{ m}^3) \approx -6.27 \times 10^{4} \text{ J}\][/tex]
The negative sign indicates work done on the gas.
Therefore, the work done on the gas during the expansion is approximately -6.27 × 10⁴ J.
(d) To find the temperature of the gas at the new volume, we can rearrange the ideal gas law equation:
PV = nRT
Solving for T:
[tex]\[T = \frac{PV}{nR}\][/tex]
Given:
Pressure (P) = 9.22 × 10⁴ Pa
Volume (V) = 1.000 m³
Number of moles (n) = 12.0 mol
Ideal gas constant (R) = 8.314 J/(mol·K)
Plugging in the values:
[tex][T = \frac{9.22 \times 10^{4} \text{ Pa} \times 1.000 \text{ m}^3}{12.0 \text{ mol} \times 8.314 \frac{\text{J}}{\text{mol K}}}][/tex]
T ≈ 924 K
Therefore, the temperature of the gas at the new volume is approximately 924 K.
(e) The internal energy of the gas when its volume is 1
To know more about the cylinder of volume refer here :
https://brainly.com/question/14669564#
#SPJ11
Complete question :
A cylinder of volume 0.320 m³ contains 12.0 mol of neon gas at 22.8°C. Assume neon behaves as an ideal gas. (a) What is the pressure of the gas? 9.22e4 Pa (b) Find the internal energy of the gas. 4.42.e4 J (c) Suppose the gas expands at constant pressure to a volume of 1.000 m³. How much work is done on the gas? -6.27e4 J (d) What is the temperature of the gas at the new volume? 9.24e2 K (e) Find the internal energy of the gas when its volume is 1.000 m³. 1.38e5 J (f) Compute the change in the internal energy during the expansion. 9.40e4 (g) Compute AU - W. 15.6e4 J (h) Must thermal energy be transferred to the gas during the constant pressure expansion or be taken away? This answer has not been graded yet. (1) Compute Q, the thermal energy transfer. J (j) What symbolic relationship between Q, AU, and W is suggested by the values obtained?
Constants The magnetic field in a EM wave traveling in free space has an rms strength of 24.5 nt. Part A How long does it take to deliver 355 J of energy to 1.05 cm? of a wall that it hits perpendicularly? Express your answer using three significant figures. IV ALQ R O O ?
The time taken by the wave to deliver energy to a wall of 1.05 cm² area is 0.753 μs. The RMS strength of the magnetic field in an EM wave traveling in free space is 24.5 nt and energy delivered to 1.05 cm2 of a wall is 355J.
Solution: Part A The energy delivered by an electromagnetic wave per second per unit area is given as
Poynting vector= [tex][E × B]/μ0[/tex]
Here,E is the electric field strength, B is the magnetic field strength and
μ0 is the permeability of free space. If the energy delivered to the area, dA, is dE, in time dt, then from the above equation
Poynting vector=[tex]dE/dt × dA[/tex]
On integration, the total energy delivered by the wave over time t is given as[tex]E= 1/μ0 × ∫p dt[/tex]
Since the Poynting vector, [tex]|P|= EB/μ0[/tex] and the strength of the magnetic field in the EM wave is given as B = Brms
Hence the Poynting vector is given as
[tex]|P|= ErmsBrms/μ0[/tex]
= Erms²/377 watts/m²
The energy delivered to an area, dA, in time dt is given by
[tex]dE= P dt × dA[/tex]
= Erms²/377 × dt × dA
The energy delivered to an area A in time dt is given by
dE = Erms²/377 × A × dt
The total energy delivered to an area, A, in time t is given by
E = ∫dE = Erms²/377 × A × ∫dtE
= Erms²/377 × A × t
Thus, the time duration of an EM wave to deliver energy, E, to an area, A, is given by
t = 377 E / (Erms)² × A
Here,E = 355J
A = 1.05 cm²
= 1.05 × 10⁻⁴ m²Brms
= 24.5 nT
= 24.5 × 10⁻⁹ Tt
= 377 × 355 / (24.5 × 10⁻⁹)² × 1.05 × 10⁻⁴
= 7.53 × 10⁻⁷ seconds
= 0.753 μs (rounded to three significant figures)
Answer: The time taken by the wave to deliver energy to a wall of 1.05 cm² area is 0.753 μs.
To learn more about magnetic visit;
https://brainly.com/question/3617233
#SPJ11
how fast must you be approaching a red traffic light ( λ = 675 nm ) for it to appear yellow ( λ = 575 nm )? express your answer in terms of the speed of light.
So, to observe the red traffic light as yellow, the observer must approach the light with a speed of 0.148 times the speed of light.
When the observer approaches the red traffic light with a speed, the light appears shifted towards the blue end of the spectrum. The apparent frequency and wavelength shift is calculated using the Doppler effect equation.
The Doppler shift is given by the relation f′= f (v+vO)/c
where, f' is the observed frequency, f is the frequency of the wave, v is the speed of the observer, v O is the speed of the source and c is the speed of the wave.
For the red traffic light,
f= c/λ = 4.44 × 10^14 Hzλ
= 675 nm
For the yellow traffic light,
f = c/λ
= 5.22 × 10^14 Hzλ
= 575 nm
As we know that the light appears yellow when the red light shifts 575 nm.
Therefore, the observer should be approaching the light with a speed given by the relation as,
∆f/f = v/c⇒ ∆λ/λ
= v/c⇒ v
= c (∆λ/λ)
= c [(λ_0 - λ)/λ_0 ]
Where,λ is the wavelength of the shifted light (λ = 575 nm),λ0 is the wavelength of the unshifted light (λ0 = 675 nm)
Therefore,
v = c [(675 - 575)/675]⇒ v
= 0.148c
So, the observer must approach the red traffic light at a speed of 0.148 times the speed of light to observe it as yellow.
An observer, when approaching a red traffic light, experiences a shift in the light's wavelength towards the blue end of the spectrum. This apparent frequency and wavelength shift is given by the Doppler effect equation.
The Doppler shift can be expressed using the relation,
f′= f (v+vO)/c
where, f' is the observed frequency, f is the frequency of the wave, v is the speed of the observer,v O is the speed of the source and c is the speed of the wave.
The frequency and wavelength of the red and yellow traffic lights are,
f= c/λ
= 4.44 × 10^14 Hz,
λ = 675 nm and
f = c/λ
= 5.22 × 10^14 Hz,
λ = 575 nm.
Since we know that the light appears yellow when the red light shifts by 575 nm, the observer must be approaching the light with a velocity given by the following relation:
∆f/f = v/c⇒ ∆λ/λ
= v/c⇒ v
= c (∆λ/λ_0 ) where λ_0 is the wavelength of the unshifted light (λ_0 = 675 nm)
Therefore,
v = c [(675 - 575)/675]⇒ v
= 0.148c
To know more about speed visit:
https://brainly.com/question/28224010
#SPJ11
Part A An astronaut on another planet drops a 1.kg rock from rest. The astronaut notices that the rock falls 2 meters straight down in one second. On this planet, how much does the rock weigh? 1 N 5N 10 N 4N
On earth, the value of acceleration due to gravity is approximately 9.81 m/s^2. Therefore, if the mass of an object is 1 kg, its weight will be 9.81 N. nearest value is 10N therefore option c
Part A:
Given that an astronaut on another planet drops a 1 kg rock from rest. The astronaut notices that the rock falls 2 meters straight down in one second. We are required to find how much does the rock weigh on this planet.
As per the given information,
Acceleration due to gravity (g) = 2 m/s^2Mass (m) = 1 kg
The formula for weight (W) of an object is given as:
W = m × g
Substituting the given values in the above equation, we get
W = 1 kg × 2 m/s^2W = 2 N
Therefore, the rock weighs 2 N on this planet.
Part B:
The weight of an object is the force acting on it due to gravity. It is a vector quantity, which means it has both magnitude and direction. The weight of an object is directly proportional to its mass and the acceleration due to gravity. It can be measured in Newtons (N).
On earth, the value of acceleration due to gravity is approximately 9.81 m/s^2.
However, the value of acceleration due to gravity is different on different planets, which means the weight of an object will also differ on different planets. For example, on the moon, the value of acceleration due to gravity is approximately 1.62 m/s^2.
Therefore, if the mass of an object is 1 kg, its weight will be 1.62 N on the moon.
The weight of an object can be determined using a spring balance or a weighing scale. The spring balance works on the principle of Hooke's law, which states that the force applied on a spring is directly proportional to its extension. When an object is suspended from a spring balance, the spring extends due to the force of gravity acting on the object. The weight of the object can be calculated by measuring the extension of the spring. The weighing scale works on the principle of measuring the force applied on a rigid body due to the weight of an object. When an object is placed on a weighing scale, its weight exerts a force on the rigid body, which is then measured by the scale.
to know more about spring balance visit:
https://brainly.com/question/1597448
#SPJ11
make sure to add units if needed please :)
What is the value of each of the angles of a triangle whose sides are 151, 190, and 89 cm in length? (Hint: Consider using the law of cosines given in Appendix E.) Units The angle opposite the side of
To find the value of each angle of a triangle, we can use the law of cosines.
According to the law of cosines, for a triangle with sides of lengths a, b, and c, and the angle opposite side c denoted as C, the following equation holds:
c^2 = a^2 + b^2 - 2ab cos(C)
In this case, the sides of the triangle are given as 151 cm, 190 cm, and 89 cm. Let's denote the angles opposite these sides as A, B, and C, respectively.
Applying the law of cosines to each angle, we have:
(89 cm)^2 = (151 cm)^2 + (190 cm)^2 - 2(151 cm)(190 cm) cos(A)
(151 cm)^2 = (89 cm)^2 + (190 cm)^2 - 2(89 cm)(190 cm) cos(B)
(190 cm)^2 = (89 cm)^2 + (151 cm)^2 - 2(89 cm)(151 cm) cos(C)
Solving these equations will give us the values of angles A, B, and C in radians or degrees, depending on the unit of measurement used.
To know more about "Law of cosines" refer here:
https://brainly.com/question/27336767#
#SPJ11
A car of mass 1000kg is travelling down a steep hill. The brakes fail and the driver uses a horizontal sand-filled safety road to stop the car.
The car enters the sand at a speed of 10 m / s and experiences a constant stopping force of
2500N.
How far does the car travel in the sand before coming to rest?
A 2.0 m
B 4.0 m
C 20 m
D 40 m
The car travels a distance of C. 20 meters in the sand before coming to rest.
To determine how far the car travels in the sand before coming to rest, we can use the principle of work-energy.
The work-energy principle states that the work done on an object is equal to its change in kinetic energy. In this case, the work done by the stopping force on the car will be equal to the initial kinetic energy of the car.
The work done is given by the equation:
Work = Force × Distance
Since the force is constant at 2500 N, and the work done is equal to the initial kinetic energy, we have:
2500 N × Distance = (1/2) × mass × velocity²
Substituting the given values:
2500 N × Distance = (1/2) × 1000 kg × (10 m/s)²
2500 N × Distance = 50000 J
Distance = 50000 J / 2500 N
Distance = 20 m
Therefore, the car travels a distance of 20 meters in the sand before coming to rest. By equating the work done by the stopping force to the initial kinetic energy of the car, we found that the car travels a distance of 20 meters in the sand before coming to rest. Therefore, Option C is correct.
Know more about principle of work-energy here:
https://brainly.com/question/10063455
#SPJ8
the centers of a 10 kg lead ball and a 140 g lead ball are separated by 15cm . a. What gravitational force does each exert on the other?
b. What is the ratio of this gravitational force to the gravitational force of the earth on the
The gravitational force that each of the balls exerts on the other is about 1.86 x 10⁻⁵ N. The ratio of this gravitational force to the gravitational force of the earth on the 10 kg ball is about 1.89 x 10⁻⁷
a. The force of gravity that each of the balls exerts on the other can be calculated using the formula:F = Gm1m2 / r²whereF is the force of gravityG is the universal gravitational constantm1 is the mass of the first objectm2 is the mass of the second objectr is the distance between the centers of the two objects Plugging in the values given, we get:
F = (6.67 x 10⁻¹¹ Nm²/kg²)(10 kg)(0.14 kg) / (0.15 m)²
F ≈ 1.86 x 10⁻⁵ N
Therefore, each ball exerts a force of about 1.86 x 10⁻⁵ N
on the other.b. To find the ratio of this gravitational force to the gravitational force of the earth on the 10 kg ball, we need to first calculate the gravitational force of the earth on the 10 kg ball.
This can be done using the formula:
F = mg where F is the force of gravitym is the mass of the objectg is the acceleration due to gravityPlugging in the values given, we get:
F = (10 kg)(9.81 m/s²)F ≈ 98.1 N
The ratio of the gravitational force between the two balls to the force of gravity of the earth on the 10 kg ball is:1.86 x 10⁻⁵ N / 98.1 N ≈ 1.89 x 10⁻⁷
The gravitational force that each of the balls exerts on the other is about 1.86 x 10⁻⁵ N. The ratio of this gravitational force to the gravitational force of the earth on the 10 kg ball is about 1.89 x 10⁻⁷
To know more about gravitational force visit:
brainly.com/question/32609171
#SPJ11
Radio wave radiation falls in the wavelength region of 10.0 to 1000 meters. What is the energy of radio wave radiation that has a wavelength of 254 m? Energy = _____ kJ/photon
The energy of radio wave radiation with a wavelength of 254 meters is approximately 7.81 x 10^-26 kJ/photon.
To calculate the energy of a photon of radio wave radiation with a given wavelength, we can use the equation:
Energy = (Planck's constant × speed of light) / wavelength
Planck's constant (h) is approximately 6.626 x 10^-34 joule-seconds.
The speed of light (c) is approximately 3.00 x 10^8 meters per second.
The wavelength (λ) is given as 254 meters.
Plugging in the values into the equation:
Energy = (6.626 x 10^-34 J·s × 3.00 x 10^8 m/s) / 254 m
Calculating the value:
Energy ≈ 7.81 x 10^-23 Joules
To convert the energy from joules to kilojoules, we divide by 1000:
Energy = (7.81 x 10^-23 J) / 1000
Energy ≈ 7.81 x 10^-26 kilojoules
Learn more about radio wave radiation: brainly.com/question/31389640
#SPJ11
Radio wave radiation falls in the wavelength region of 10.0 to 1000 meters. Energy = 4.9×10⁻²² kJ/photon. Radio waves are a type of electromagnetic radiation that travels through space at the speed of light.
Their wavelengths vary widely, ranging from 10⁻¹⁴ to 10⁴ meters. The energy of radio wave radiation with a wavelength of 254 m can be calculated using the formula: E = hc /λwhereE is energy, h is Planck's constant, which is 6.626 x 10^-34 joule-seconds, andλ is the wavelength of the radiation.
The speed of light, c, is 3 x 10⁸ meters per second. Substituting the values, we have: E = (6.626 × 10⁻³⁴ J·s) × (3 × 10⁸ m/s) / (254 m) = 7.82 × 10⁻²⁶ J/photon1 joule is equal to 1 x 10⁻³ kJ. Therefore, we can convert the energy of radio wave radiation to kJ/photon by dividing by 1000.7.82 × 10⁻²⁶ J/photon = 7.82 × 10⁻²⁹ kJ/photon
So, the energy of radio wave radiation with a wavelength of 254 m is 4.9 × 10⁻²² kJ/photon.
To know more about Radio wave, refer
https://brainly.com/question/69373
#SPJ11
explain why we do not get a lunar and solar eclipse every month.
We do not get a lunar and solar eclipse every month because of the fact that the Moon's orbital plane is not aligned with the Earth's orbit around the Sun.
In order for a lunar or solar eclipse to occur, there must be an alignment between the Earth, the Moon, and the Sun. During a lunar eclipse, the Earth passes between the Sun and the Moon, casting a shadow on the Moon. Meanwhile, during a solar eclipse, the Moon passes between the Sun and the Earth, blocking out the Sun's light. However, the Moon's orbit is tilted at an angle of about 5 degrees to the Earth's orbit around the Sun. As a result, the Moon does not always pass through the Earth's shadow during a full moon (lunar eclipse) or align perfectly with the Sun during a new moon (solar eclipse). This is why lunar and solar eclipses are relatively rare occurrences.
Every month, the Moon goes through its phases as it orbits the Earth. At the new moon, the Moon is between the Earth and the Sun, but it does not necessarily block out the Sun's light because the Moon's orbit is tilted slightly. Likewise, at the full moon, the Moon is on the opposite side of the Earth from the Sun, but it does not always pass through the Earth's shadow because of the same tilt. So, lunar and solar eclipses can only occur when the Moon is in just the right position relative to the Sun and Earth. The occurrence of a lunar or solar eclipse is also dependent on the geometry of the three bodies; they have to be in alignment. Additionally, Earth's atmosphere plays a role in the occurrence of solar and lunar eclipses. If the atmosphere is filled with smoke or dust, or if the Earth's atmosphere is very clear, this can impact the visibility of the eclipses. Ultimately, the rarity of eclipses is due to the complex interplay of many factors, including the Moon's orbit, the Earth's orbit around the Sun, and the geometry of the three bodies.
To know more about solar eclipse visit :-
https://brainly.com/question/12075389
#SPJ11
Given that E = 15ax - 8az V/m at a point on the surface of a conductor, determines the surface charge density at that point. Assume that ε = £0. a. 1.50x10-10 b. 2.21x10-10 c. 1.91x10-10 d. 2.12x10-10
The surface charge density at that point with Electric field, E=15ax-8az V/m with permittivity in free space is ε=ε₀ is, σ=1.5×10⁻¹⁰ c/m². Hence, option A is correct.
The Gauss law is defined as the electric flux of the closed surface is equal to the charge enclosed by the given area. Electric flux is defined as the number of field lines crossing through a given area.
From the given area,
E = 15ax-8az V/m
ε=ε₀ (ε₀ is the permittivity in free space)=8.854×10⁻¹².
surface charge density, (σ) =?
E = σ/ε₀
σ = E×ε₀
= (15ax-8az)×8.854×10⁻¹².
= √(15)²+(8)²×8.854×10⁻¹².
= 17×8.854×10⁻¹².
= 1.50×10⁻¹⁰C/m².
Thus, the surface charge densities, σ = 1.50×10⁻¹⁰ C/m².
To learn more about Gauss law:
https://brainly.com/question/30516416
#SPJ4
Listen Metallic chromium can be obtained from the mineral chromite (FeCr204). What is the mass percent of chromium in chromite? 46.46% 61.90% 23.23% 30.26% 41.99%
The mass percent of chromium in chromite is 46.46%.
How to find mass percent?Find the molar mass of Cr. It is 52 g/mol.
Find the molar mass of chromite. It is (52+2*56+4*16) g/mol. (FeCr2O4)
Find the mass of Cr in 1 mol of chromite. It is (52/120)*100%.
Calculate the mass percent of Cr in chromite using the below formula.
Mass percent of Cr = (mass of Cr/mass of chromite)×100%
Substitute the calculated values in the above formula.
Mass percent of Cr = (52/120) × 100% = 46.46%.
Hence, the correct option is 46.46%.
Learn more about chromite at:
https://brainly.com/question/32536203
#SPJ11
Option (c), 46.46%. the mass percent of chromium in chromite is 30.26%.
This is the mass percent of chromium in chromite. Chromite, also known as FeCr2O4, is a mineral that contains both iron and chromium. To calculate the mass percent of chromium in chromite, we must first determine the molar mass of chromite. We can do this by adding up the molar masses of all the atoms in one formula unit of chromite:
Fe: 1 x 55.85 g/mol = 55.85 g/mol
Cr: 1 x 52.00 g/mol = 52.00 g/mol
O: 4 x 16.00 g/mol = 64.00 g/mol
Adding these together, we get a molar mass of 171.85 g/mol for chromite. Next, we need to determine the mass of chromium in one formula unit of chromite:
Cr: 1 x 52.00 g/mol = 52.00 g/mol
Finally, we can calculate the mass percent of chromium in chromite using the following formula:
mass percent of chromium = (mass of chromium / mass of chromite) x 100
mass percent of chromium = (52.00 g/mol / 171.85 g/mol) x 100
mass percent of chromium = 30.26%
Learn more about the mass percent: https://brainly.com/question/15461083
#SPJ11
