Answer:The answer to this question comes from experiments done by the scientist Robert Boyle in an effort to improve air pumps. In the 1600's, Boyle measured the volumes of gases at different pressures. Boyle found that when the pressure of gas at a constant temperature is increased, the volume of the gas decreases. when the pressure of gas is decreased, the volume increases. this relationship between pressure and volume is called Boyle's law.
Explanation: So, at constant temperature, the answer to your answer is: the volume decreases in the same ratio as the ratio of pressure increases.
BUT, in general, there is not a single answer to your question. It depend by the context.
For example, if you put the gas in a rigid steel tank (volume is constant), you can heat the gas, so provoking a pressure increase. But you won't get any change in volume.
Or, if you heat the gas in a partially elastic vessel (as a tire or a soccer ball) you will get both an increase of volume AND an increase of pressure.
FINALLY if you inflate a bubblegum ball, the volume will be increased without any change in pressure and temperature, because you have increased the NUMBER of molecules in the balloon.
There are many other ways to change volume and pressure of a gas that are different from the Boyle experiment.
Which metal is most easily oxidized?
A) Cu B) Ag C) Mg D) Co
Answer:
It is Magnesium because magnesium is the most active out of those three
Explanation:
The metal which is most easily oxidized is : ( C ) Magnesium ( Mg )
What is Oxidization ?
Oxidization involves the process of the addition of oxygen and the removal of electrons from a compound when Magnesium reacts with oxygen it easily gets oxidized when compared to other metals in the question since magnesium is the most active.
Hence we can conclude that The metal which is most easily oxidized is : ( C ) Magnesium ( Mg ).
Learn more about oxidization :https://brainly.com/question/8990767
#SPJ2
Help Ill give you the brainiest answer thing please just give me the right answer
Answer:
the 3rd one
Explanation:
Describe the catenation property of carbon by illustrating the formation of a straight chain and branched chain compounds
Answer:
Catenation refers to the ability of an atom to link to other atoms of the same kind to form a chain.
Explanation:
Catenation is the binding of an element to itself through covalent bonds to form chain or ring .Catenation can also be defined as the self-linking of atoms of an element to form chains and rings. This definition can be extended to include the formation of layers like two-dimensional catenation and space lattices like three-dimensional catenation. Thus, we can boldly say that, Catenation occurs when atoms of the same element covalently bond to one another to create a chain or ring.
Catenation occurs most readily in carbon, forming covalent bonds to and longer chains and structures with other carbon atoms. This is why the vast number of organic compounds are found in nature. Carbon is best known for its catenation properties, with the analysis of catenated carbon structures in organic chemistry.
Carbon is by no means the only element capable of forming such catenae, however, and several other main group elements are capable of forming a wide range of catenae, including silicon, sulfur, and boron. In group 14, the high bond energy of carbon makes it able to self-link almost indefinitely when compared with other members of the group which form only a few bonds to other atoms of the same element.
What is the molarity of sodium hydroxide solution made by combining 2.0 L of 0.60
NaOH With 495 mL 3.0 M NaOH? Assume the volumes of the two solutions to be additive___M
Answer:
[tex]M=1.1M[/tex]
Explanation:
Hello,
In this case, since we are mixing two NaOH solutions, the first step is to compute the total moles once the mixing is done, by using the volumes and concentrations of each solutions and subsequently adding them:
[tex]n_T=2.0L*0.60\frac{mol}{L}+495mL*\frac{1L}{1000mL}*3.0\frac{mol}{L}= 2.7molNaOH[/tex]
Next, we compute the total volume by adding the volume of each solution:
[tex]V_T=2.0L+495mL*\frac{1L}{1000mL}= 2.495L[/tex]
Finally, we compute the molarity of the resulting solution by the division between the total moles and the total volume:
[tex]M=\frac{2.7mol}{2.495L}\\ \\M=1.1M[/tex]
Best regards.
Consider the half reaction below.
2 upper C l superscript minu (a q) right arrow upper C l subscript 2 (g) plus 2 e superscript minus.
Which statement best describes what is taking place?
Chlorine is losing electrons and being oxidized.
Chlorine is losing electrons and being reduced.
Chlorine is gaining electrons and being oxidized.
Chlorine is gaining electrons and being reduced.
In this reaction, chlorine is losing electrons and being oxidized. Therefore, option A is correct.
What is an electron ?The elementary electric charge of the electron is a negative one, making it a subatomic particle. Due to their lack of components or substructure, electrons, which are part of the lepton particle family's first generation, are typically regarded to be elementary particles.
Quarks make up protons and neutrons, but not electrons. We believe that quarks and electrons are fundamental particles that are not composed of lesser subatomic particles. Saying that everything is formed of particles is one thing.
An electron's energy is determined by where it is in relation to the atom's nucleus. The distance an electron in an atom has to travel from the nucleus depends on its energy level.
Thus, option A is correct.
To learn more about an electron, follow the link;
https://brainly.com/question/1255220
#SPJ6
Answer:
Explanation:
Option A - chlorine is losing electrons and being oxidized.
A. An element with the valence electron configuration 5s1 would form a monatomic ion with a charge of ________. In order to form this ion, the element will _______ electron(s) from/into the _______ subshell(s).
B. An element with the valence electron configuration 2s22p4 would form a monatomic ion with a charge of ______. In order to form this ion, the element will ______ electron(s) from/into the _______ subshell(s)
Answer:
A) An element with the valence electron configuration 5s¹ would form a monatomic ion with a charge of +1. In order to form this ion, the element will lose electron(s) from/into the 5s subshell(s).
B) An element with the valence electron configuration 2s²2p⁴ would form a monatomic ion with a charge of +1. In order to form this ion, the element will lose electron(s) from/into the 2p (2pₓ specifically) subshell(s).
Explanation:
The secret to this task is to follow those rules for the stability of electronic structures of elements. The rules include
- Electrons are filled firstly into shells or subshells of lower energies first.
- While filling electronic structure or writing electronic structures for elements/ions, electrons are fed singly to the suborbital before pairing occurs, this is because the totally paired up electrons of a suborbital are more stable than the totally unpaired electrons of the same suborbital which is now in turn more stable than the combination of paired and unpaired electrons in the suborbitals.
A) For an element with its valence electron on 5s¹, this means that there is one valence electron on this atom's outermost shell and outermost suborbitals. So, to form a monoatomic ion, it would take between losing and gaining an electron. Gaining an electron leads to a 5s², which indicates empty 5p orbitals too and is therefore less stable than losing an electron which would lead to the loss of the shell 5 and focus on a completely filled 4-shell.
So, losing the electron from the 5s suborbital to become a monotonic ion makes it acquire a charge of +1.
B) Just like the explanation in (A), to form a monoatomic ion would require a loss or gain of an electron. With valence electrons 2s²2p⁴, gaining an electron would have led to a 2s²2p⁵ and a further breakdown as 2s²2pₓ²2pᵧ²2pz¹ which has unpaired and paired electrons in the 2p suborbital. This is evidently less stable than if an electron was lost, the valence electrons are 2s²2p³ and they are positioned in a totally unpaired fashion in the 2p suborbital as 2s²2pₓ¹2pᵧ¹2pz¹.
Hence, the more stable alternative is more likely to occur and the electron is lost from the 2pₓ suborbital to make the monoatomic ion of the element acquire a +1 charge status too because of lost electron too.
Hope this Helps!!!
The octet rule states that the atoms of the elements bond to each other in an attempt to complete their valence shell with eight electrons. In other words, the atoms will tend to give up or share electrons to complete eight electrons in the valence shell through an ionic, covalent or metallic bond.
In other words, the goal is to have the closest noble gas electron configuration, thus having the last complete electron shell and acquiring stability.
So, in this case, to comply with the octet rule:
A. An element with the valence electron configuration 5s¹ would form a monatomic ion with a charge of +1. In order to form this ion, the element will lose one electron from the 5s subshell.
For an element with its valence electron at 5s¹, this means that there is one valence electron in the outermost shell of this atom and in the outermost suborbitals. To form a monatomic ion, it would be necessary between losing or gaining an electron and that ion is stable. It takes less energy to lose the electron of the suborbital 5s and acquire a charge of of +1, than to acquire an electron, because it forms the 5s² suborbital, which indicates empty 5p orbitals too and is therefore less stable.
Also, in this way, the octet rule is fulfilled.
B. An element with the valence electron configuration 2s²2p⁴ would form a monatomic ion with a charge of -2. In order to form this ion, the element will gain two electron into the 2p subshell(s).
After gain two electron the atom has eight electrons in its valence shell, giving it the same electronic configuration as a noble gas (2s²2p⁶). In this way, the octet rule is fulfilled and the ion is stable.
Learn more:
https://brainly.com/question/14077115?referrer=searchResultshttps://brainly.com/question/13980678?referrer=searchResults
When you need to produce a variety of diluted solutions of a solute, you can dilute a series of stock solutions. A stock solution has a significantly higher concentration of the given solute (typically 101 to 104 times higher than those of the diluted solutions). The high concentration allows many diluted solutions to be prepared using minimal amounts of the stock solution. What volume of a 6.01 M stock solution do you need to prepare 100. mL of a 0.3624 M solution of HCl?
Answer:
Volume of stock solution needed = 6.0299 mL
Explanation:
Dilution consists of lowering the amount of solute per unit volume of solution. It is achieved by adding more diluent to the same amount of solute.
This is deduced when thinking that both the dissolution at the beginning and at the end will have the same amount of moles.
Data:
M1 = 6.01 M stock solution concentration
M2 = 0.3624 M diluted solution concentration
V2 =100 mL diluted solution volume
V1 = ? stock solution volume
M1 * V1 = M2 * V2
[tex]V1=\frac{M2*V2}{M1} =\frac{0.3624M*100mL}{6.01M} =6.0299 mL[/tex]
Sometimes in lab we collect the gas formed by a chemical reaction over water (see sketch at right). This makes it easy to isolate and measure the amount of gas produced. Wala Suppose the H, gas evolved by a certain chemical reaction taking place at 40.0 °C is collected over water, using an apparatus something like that in the sketch, and the final volume of gas in the collection tube is measured to be 80.0 mL. Sketch of a gas-collection apparatus Calculate the mass of H, that is in the collection tube. Round your answer to 2 significant digits. You can make any normal and reasonable assumption about the reaction conditions and the nature of the gases. XS?
Answer:
see explaination
Explanation:
Case 1) When we consider vapor pressure of H2O;
Let the pressure is 1 atm OR 760 torr.
As H2 is collected over water, we have to consider the vapor pressure of H2O as well.
Using data i.e. vapor pressure of H2O at 40° C = 55.365 torr
So, pressure of H2 = P = 760 - 55.365 = 704.635 torr = 704.635/760 = 0.9272 atm
Volume of H2 = 80 ml = 0.08 liter
Temperature (T) = 40 + 273 = 313 K
Gas constant (R) = 0.0821 L atm/mol K
Let n is moles of H2. Applying ideal gas equation;
PV = nRT
n = PV/RT = 0.9272 * 0.08 / 0.0821 * 313
n = 0.00289 moles
Mass of H2 = moles * molar mass = 0.00289 * 2.016 = 0.00582 grams
OR 5.8*10^-3 grams ...Answer
----> Case 2) When we don't consider vapor pressure;
Pressure of H2 = 1 atm, all other parameters will remain same as in case 1.
So, mass of H2 = 6.3*10^-3 grams
But Case 1) is correct approach as in question it is mentioned that H2 is collected over water.
Oxygen gas O2 was placed into a closed container at 273.15K. What is the change in temperature that is required in order to increase the pressure from 2.50atm to 7.50atm and decrease the volume from 3.50L to 1.50L?
Answer: 351.19K
Explanation: This is a case were the combined gas equation can be applied.
Combined gas equation is given as; P1V1/T1 = P2V2/T2,
where P1 = Initial pressure = 2.50 atm
P2= Final pressure = 7.50 atm
V1 = Initial volume = 3.50L
V2 = Final Volume = 1.50L
T1 = Initial Temperature = 273.15K
T2 = Final Temperature = ?
∴ 2.50atm x 3.50L / 273.15K = 7.50atm x 1.50L / T2
Making T2 the subject of Formular; we then have;
T2 = P2 V2 T1 / P1 V1 = 7.50atm x 1.50L x 273.15K / 2.50atm x 3.50L
= 3072.94 / 8.75 = 351.19K
The change in temperature (T2) is 351.19K.
2. What are the similarities between law of triads and law of octaves?
Answer:
The similarities are the groups, triads law is a law where they are in groups or three, the octaves law is the 'best' law, is the one who every atom wants, they do everything to be in groups of eight.
Explanation:
Is it true or false?
Answer:
True
Explanation:
Burning waste can lead to air pollution and release of greenhouse gases. Carbon dioxide is one of those gases.
Calculate the pH of a [0.000765) M solution of KOH
Answer:
pH=10.88
Explanation:
Hello,
In this case, since potassium hydroxide is completely dissociated as shown below:
[tex]KOH\rightarrow K^++OH^-[/tex]
For which we understand it is a base, more specifically, a strong base; it means that the concentration of the OH⁻ equals the concentration of the potassium hydroxide, that is 0.000765M, for that reason we can directly compute the pOH:
[tex]pOH=-log([OH^-])=-log(0.000765)=3.12[/tex]
Finally, since the pOH and the pH are related by:
[tex]pOH+pH=14[/tex]
The pH turns out:
[tex]pH=14-3.12\\pH=10.88[/tex]
Best regards.
What is the boiling point of water
Answer:
100 °CExplanation:
The boiling point of water is 100 °C or 212 °F at 1 atmosphere of pressure (sea level).
Use the periodic table to complete this nuclear fission equation.
Superscript 235 Subscript 92 Baseline U + Superscript 1 Subscript 0 Baseline n yields Superscript 139 Subscript 56 Baseline B a + Superscript A Subscript B Baseline C + 3 Superscript 1 Subscript 0 Baseline n
What is the value of A, B, and C
Answer:
A: 94
B: 36
C: Kr
Explanation:
Got them right & hope it helps :)
Answer:
A: 94
B: 36
C: Kr
Explanation:
edg2020
If I add 50 mls of water to 300 mls of 0.6M KNO3 solution, what will be the molarity of the diluted solution?
Answer:
[tex]M_2=0.51M[/tex]
Explanation:
Hello,
In this case, for this dilution process, we understand that the moles of the solute (potassium nitrate) remain unchanged upon the addition of diluting water. However, the resulting or final volume includes the added water as shown below:
[tex]V_2=300mL+50mL=350mL[/tex]
In such a way, we are able to relate the solution before and after the dilution by:
[tex]V_1M_1=V_2M_2[/tex]
Hence, we solve for the final molarity as:
[tex]M_2=\frac{M_1V_1}{V_2}=\frac{0.6M*300mL}{350mL}[/tex]
Best regards.
[tex]M_2=0.51M[/tex]
Please help! BRAINLIEST to correct answer!!!!
Answer:
Exothermic ProcessExplanation:
Why did the Mt. Pinatubo eruption result in global temperatures dropping almost two degrees?
Answer:
In the case of Mount Pinatubo, the result was a measurable cooling of the Earth's surface for a period of almost two years. Because they scatter and absorb incoming sunlight, aerosol particles exert a cooling effect on the Earth's surface.
Explanation:
Temperature measures the average kinetic energy of particles of the substances. Therefore, the Mt. Pinatubo eruption result in global temperatures dropping almost two degrees.
What is temperature?Temperature is used to measure degree or intensity of heat of a particular substance. Temperature is measured by an instrument called thermometer.
Temperature can be measured in degree Celsius °c, Kelvin k or in Fahrenheit. Temperature is a physical quantity. Heat always flow from higher temperature source to lower temperature source.
We can convert these units of temperature into one another. The relationship between degree Celsius and Fahrenheit can be expressed as:
°C={5(°F-32)}÷9
The Mt. Pinatubo eruption result in global temperatures dropping almost two degrees because they scatter and absorb incoming sunlight, aerosol particles exert a cooling effect on the Earth's temperature.
Therefore, the Mt. Pinatubo eruption result in global temperatures dropping almost two degrees.
To know more about temperature, here:
https://brainly.com/question/13694966
#SPJ6
SCIENCE QUESTION:
The picture below shows a satellite image of Earth from outer space.What is labeled “White” on the satellite image of Earth?
A. gas in Earth's atmosphere, which keeps Earth's temperature moderate, cycles fluids, and prevents most objects from impacting Earth's surface
B. gravity, which holds all living organisms to Earth, pulls water from clouds, and keeps Earth circulating around the Sun
C. a magnetic field, which controls the movement of water in Earth's water cycle
D. atmospheric ice crystals, which never melt and keep Earth's temperature coo
Answer:
C
Explanation:
The reflection if sunlight on the water makes the water look silver,gray,white
If you have 67.31g of CH4, how many moles do you have?
Answer:
If you have 67.31 g of CH₄, you have 4.21 moles
Explanation:
To know the amount of moles if you have 67.31 g of CH₄, you must know the molar mass, that is, the mass of one mole of a substance, which can be an element or a compound.
On the periodic table, the molar mass of the elements, also called the atomic mass or atomic weight, can be found at the bottom of the element. In this case:
C: 12 g/moleH: 1 g/moleTo calculate the molar mass of a compound, the molar mass of the elements of the compound must be added multiplied by the times they appear. So in this case the molar mass of CH₄ is:
CH₄= 12 g/mole + 4* 1 g/mole= 16 g/mole
Now you can apply the following rule of three: if 16 g are contained in 1 mole of CH4, 67.31 g in how many moles are present?
[tex]moles=\frac{67.31 g*1 mole}{16 g}[/tex]
moles= 4.21
If you have 67.31 g of CH₄, you have 4.21 moles
If a 1.45 M solution has 2.43 g HCl dissolved, what is the volume of solution? (Change g HCl into mol using molar mass)
Answer: The volume of solution is 0.0459 L
Explanation:
Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution
[tex]Molarity=\frac{n}{V_s}[/tex]
where,
n = moles of solute
[tex]V_s[/tex] = volume of solution in L
moles of HCl (solute) = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{2.43g}{36.5g/mol}=0.0666[/tex]
Now put all the given values in the formula of molality, we get
[tex]1.45M=\frac{0.0666}{V_s}[/tex]
[tex]V_s=\frac{0.0666}{1.45}=0.0459[/tex]
Therefore, the volume of solution is 0.0459 L
The glass of a lit 75-watt incandescent bulb is hotter to the touch than the glass of a 25-watt compact fluorescent (CFL) bulb that emits the same amount of light. What could be a reason for this
if a sample of gas at 25.2 c has a volume of 536mL at 637 torr, what will its volume be if the pressure is increased to 712 torr?
What is the hydrogen ion concentration [H+] of a HCl solution if the pH is measured to be 2.0?
Answer:
.01
Explanation:
H+=10^-pH
- Hope that helps! Please let me know if you need further explanation.
What is the molar mass of ethanol (C2H60)?
Answer:
46.07 g/mol is the molar mass of ethonal
Heat required to raise 1 g of a substance 1°C
Answer:
Specific heat
Explanation:
Answer:
Specific Heat
Explanation:
A P E X
Based on the diagram below, how much of the excess reactant is left over? *
2 slices of bread and 3 pieces of lunchmeat
2 slices of bread and 2 slices of cheese
2 of lunchmeat and 3 slices of cheese
3 of lunchmeat and 2 slices of cheese
Answer:
3 pieces of lunch-meat and 2 slices of cheese
Explanation:
You have enough bread to make 3 sandwiches
You have enough lunch-meat to make 4 sandwiches
You have enough cheese to make 5 sandwiches
In all you have enough material to make 3 sandwiches
so if you subtract three from each number above you will have no bread, enough lunch-meat to make one sandwich and enough cheese to make two sandwiches
luch-meat for one sandwich is: 3 pieces
Cheese for two sandwiches is: 2 pieces
What is the concentration of a solution if 0.450 mol of NaCl dissolved in 750 mL of water?
Answer:
.6mol/L
Explanation:
molarity = number of moles / volume of solvent (in L)
750mL / 1000mL/L = .75L
M = .450mol / .75L
M = .6mol/L
a fertilizer manufacturer makes a batch of 20kg of ammonium nitrate. what mass of ammonia in kg, does the manufacturer need to start with?
Answer:
[tex]m_{NH_3}=4.25kgNH_3[/tex]
Explanation:
Hello,
In this case, for the production of ammonium nitrate we shall consider the following chemical reaction:
[tex]NH_3+HNO_3\rightarrow NH_4NO_3[/tex]
Hence, since the molar mass of ammonium nitrate is 80 g/mol and the molar mass of ammonia is 17 g/mol, we could compute the required mass of ammonia to produce 20 kg of ammonium nitrate by using kilo-based units:
[tex]m_{NH_3}=20kgNH_4NO_3*\frac{1kmol}{80kgNH_4NO_3}*\frac{1kmolNH_3}{1kmolNH_4NO_3}*\frac{17kgNH_3}{1kmolNH_3} \\\\m_{NH_3}=4.25kgNH_3[/tex]
Best regards.
5) Low iron concentration (as low as 0.02 nM) in the open ocean limits phytoplankton growth. Preconcentration is required to determine such low concentrations. Trace Fe3 from a large volume of seawater is concentrated onto a 1.2 mL chelating resin column, the column is then rinsed with 30 mL of high purity water and eluted with 10 mL of 1.5 M high purity HNO3. a.) For each sample, seawater is passed through the column of 17 h at 10 mL./min. How much is the concentration of Fe3 in the 10 mL of HNO3 eluate increased by this preconcentration procedure
Answer:
Check the explanation
Explanation:
Sample volume V= 10 mL/min x 17 h x 60 min/h / 1000 mL/L = 10.2 L
The concentration is increased
10200 mL (sample volum) / 10 mL (eluted sample) = 1020 times.
57x10-9 M / 1020 = 5.6x10-12 M
1.5 M HNO3 will contain ≤ 2ppm x (1.5M/15.7M ) ≤ 0.190 ppm ≤ 190 ppb
Ignoring this is reagent impurity and calculating for sea water
≤ 190 ppb /1020 = 0.186 ppb = 0.186 x 10-9g/mL = 0.186 x 10-6g/L =
0.186 x 10-6g/L / 56 g/mol = 0.003 x10-6 M = 3 nM
Two liquids, A and B, have equal masses and equal initial temperatures. Each is heated for the same length of time over identical burners. Afterward, liquid A is hotter than liquid B. Which has the larger specific heat? Two liquids, A and B, have equal masses and equal initial temperatures. Each is heated for the same length of time over identical burners. Afterward, liquid A is hotter than liquid B. Which has the larger specific heat? Liquid A. There's not enough information to tell. Liquid B.
Answer:
Liquid A.
Explanation:
Specific heat is defined as the amount of heat required per unit of mass to raise the temperature by one degree celsius.
When two liquids are heated, the liquid with larger specific heat is the one which is hotter. That is because is required more energy to decrease its temperature by 1°C.
Thus, in the problem, liquid A has the larger specific heat
