Two elements on Mendeleev's table that combines with oxygen in the same ratio as magnesium are Beryllium and Calcium.
They form in a ratio of 1:1 with oxygen.
What is the reason behind Berylium and Calcium in the ratio of 1:1 with oxygen?
The one-to-one charge ratio results in the formula CaO. Calcium and Oxygen have iconic bonding because calcium loses two electrons and oxygen gains two to complete their octet.
BeO can be produced by the reaction between beryllium and oxygen .In this reaction , each Be atom loses its two valence electrons to 0 atoms , forming Be2+ions and O2- ions. The electrostatic attraction between the oppositely charged ions forms the iconic bond .
One characteristic used by Mendeleev to develop his classification system of the elements:
Mendeleev was directed by two variables: Expanding nuclear masses, and Gathering of components having comparative properties. Mendeleev thought about formulae of hydrides and oxides as one of the fundamental models for order, among substance properties.
One difference between Mendeleev's Table and the Modern Periodic Table is :
Mendeleev's periodic table is based on atomic mass whereas +The modern periodic table is based on the atomic number.
To learn more about Mendeleev's Periodic table from the given link:
https://brainly.com/question/11505562
#SPJ1
What is like the mitochondria?
O Excretory system
Digestive system
O Nervous system
O Skeletal System
Answer:
digestive system
.
Explanation:
The figure below shows a sealed balloon containing helium.
The balloon is squashed so its volume decreases.
No helium enters or leaves the balloon.
What happens to the density of the helium in the balloon?
When a sealed balloon containing Helium is squashed so its volume decreases, and no helium enters or leaves the balloon the density of the Helium in the balloon increases.
What is the explanation for the above?Note that the expression or equation for density is:
Density = Mass/ Volume
But we know that the mass of the Helium Atom is Constant.
Lets assume that is is 1,
Hence,
Density = 1/V
Hence, if V reduces, D increases creating an inverse relationship.
Note that the term density refers to how much space an item or substance occupies (its volume) in proportion to the amount of matter in that thing or substance (its mass). Density may also be defined as the quantity of mass per unit of volume.
Learn more about density:
https://brainly.com/question/15164682
#SPJ1
Neurons that are rare, small, and lack features that distinguish dendrites from axons are called.
Answer:Anaxonic Neurons
Explanation:
How many ml of a 14.0 m nh3 stock solution are needed to prepare 200 ml of a 4.20 m dilute nh3 solution?
60 ml of a 14.0 M NH₃ stock solution are needed to prepare 200 mL of a 4.20 M dilute NH₃ solution.
Using the formula given below ,
M₁ x V₁ = M₂ x V₂
M₁ = concentration of stock solution
V₁ = volume of stock solution (to be found out)
M₂ = concentration of diluted solution
V₂ = volume of diluted solution;
V₁ = (M₂ x V₂) / M₁
= (4.2 x 200) / 14
= 60ml
Hence , 60 ml of a 14.0 Mole NH₃ stock solution are needed to prepare 200 mL of a 4.20 M dilute NH₃ solution.
Learn more about Mole at : https://brainly.com/question/26416088
#SPJ4
When you put food coloring into water, the water will turn the color of the food coloring. When you leave a cut apple out, it will change to a brown color. Which of the two indicates a chemical reaction and why?
Food coloring because it is chemically changing the water to a different color.
Apple because it is chemically reacting with oxygen to create the brown color.
Food coloring because it indicates that there is a temperature in the water.
Apple because by cutting it, you are rearranging the apple molecules which is indicated by the brown color.
When one puts food coloring into water, the water will turn the color of the food coloring. Also, when you leave a cut apple out, it will change to a brown color. The options that indicate a chemical reaction are:
Food coloring because it is chemically changing the water to a different color. (Option A)Apple because it is chemically reacting with oxygen to create the brown color. (Option B)What is the explanation for the above choices?In the case of A, chemically speaking, the nature of the water has been altered. It is now a mixture, not water. A mixture is a combination of two or more substances that can be easily separated.
In the case of B, the process that has taken place is called Oxidation.
Redox reactions occur when the oxidation states of the substrate change. The loss of electrons or an increase in the oxidation state of a chemical or atoms within it is referred to as oxidation. Reduction is the addition of electrons or a reduction in the oxidation state of a chemical or its atoms.
Decomposition Reaction is one of the several forms of redox reactions.
Reaction to a CombinationReaction to DisplacementReactions to Disproportion.Learn more about Chemical Reactions:
https://brainly.com/question/3461108
#SPJ1
which of the following is true about free radicals? a. they are unstable and highly reactive molecules. b. they act as antioxidants in the body. c. they defend against cancer.
It is true about free radicals. a. they are unstable and highly reactive molecules.
Hydrogen peroxide and hydroxyl ions are two examples of oxygen-containing molecules with an unbalanced number of electrons. The unequal distribution of electrons makes it simple for them to interact with other molecules. To combat free radicals, use antioxidants. Heart disease and cancer are caused by free radicals. an unstable molecule type produced by typical cell metabolism The physiological metabolism produces some of these reactive molecule species (RMS), also known as "Hydrogen peroxide and hydroxyl ions are two examples of oxygen-containing molecules with an unbalanced number of electrons. The unequal distribution of electrons makes it simple for them to interact with other molecules. To combat free radicals, use antioxidants. Heart disease and cancer are caused by free radicals. an unstable molecule type produced by typical cell metabolism The physiological metabolism produces some of these reactive molecules species (RMS), also known as "free radicals" or "oxidants." Cell compartments and cells are hurt or destroyed when RMS concentrations go above a certain free radicals" or "oxidants." Cell compartments and cells are hurt or destroyed when RMS concentrations go above a certain point. These reactive molecules species (RMS), also known as "free radicals" or "oxidants," are a by-product of some physiological processes.
Learn more about free radicals here:
https://brainly.com/question/11631123
#SPJ4
in the next three problems, we will attempt to solve the problem: what is the standard entropy change for the combustion of 1 mole of diamond at room temperature?
The standard entropy change for the combustion of 1 mole of diamond at room temperature is 6.22 J / K mol.
The reaction is given as :
C (diamond) + O₂ -----> CO₂
At room temperature the value of S° is given as follows :
C = 2.38 J / K mol
O₂ = 205.2 J/Kmol
CO₂ = 213.8 J/Kmol
The standard entropy change is given as :
ΔS° = ∑S° product - ∑ S° reactant
ΔS° = ( 213.8 ) - ( 2.38 + 205.2)
ΔS° = 213.8 - 207.58
ΔS° = 6.22 J / K mol
Thus, The standard entropy change for the combustion of 1 mole of diamond at room temperature is 6.22 J / K mol.
To learn more about entropy change here
https://brainly.com/question/28380336
#SPJ4
What are the hydronium-ion and the hydroxide-ion concentration of a solution at 25°C that is 0.0085 M Ba(OH)_2?
The hydronium-ion concentration of the solution containing 0.0085 M Ba(OH)₂ is 0.017M and the hydroxide-ion concentration of the solution containing 0.0085 M Ba(OH)₂ is 5.88 × 10⁻¹³ M.
Given,
Ba(OH)₂ = 5.88 × 10⁻¹³ M
Dissociation of Ba(OH)₂ is given as :
Ba(OH)₂ → Ba²⁺ + OH⁻
Balanced equation:
Ba(OH)₂ → Ba²⁺ + 2OH⁻
As 1 mole of barium hydroxide produces 2 moles of hydroxide ions, so the concentration of hydroxide ion is,
[OH⁻] = 2 × [Ba(OH)₂]
[OH⁻] = 2 × 0.0085 M
[OH⁻] = 0.017 M
The concentration of hydronium ion is as follows:
[H₃O⁺] = Kw / [OH⁻]
∴ Kw = 1.0 × 10⁻¹⁴
[H₃O⁺] = 1.0 × 10⁻¹⁴ / 0.017
⇒ [H₃O⁺] = 5.88 × 10 ⁻¹³
Hence, the hydronium-ion and the hydroxide-ion concentration of the solution containing 0.0085 M Ba(OH)₂ at 25°C are 5.88 × 10 ⁻¹³ and 0.017 M respectively.
Learn more about hydroxide and hydronium ion concentration from the link given below.
https://brainly.com/question/18493607
#SPJ1
I am working on a Bohr Rutherford Diagram for Science right now, and my first question on the textbook is "draw a Bhor Rutherford Diagram for Sulfur-32."
How do I figure out how many dots I put in the Diagram?
The number of dots in the Bohr Rutherford Diagram for sulphur-32 is equal to 16 as the dots represent the number of electrons and the sulfur atoms have 16 in its atom. Bohr Rutherford's Diagram of sulphur-32 is shown below.
What is Bohrs' model of an atom?Bohr's model described the atomic structure by explaining the electrons move in definite and fixed orbitals or electron shells. Boh's model proposed that atoms contain a nucleus and the electrons surround this atomic nucleus.
Each orbit has fixed energy and the energy levels are represented with integer 1, 2, 3,.... and sometimes also represented as K, L, M, N...... shells.
When the electron moves from a lower energy level to a higher energy level then it absorbs energy and when the electron falls from a higher energy level to a lower energy level then it emits energy.
The atomic number of the sulfur atom is 16 so it has 16 electrons. Therefore, we can show 16 dots surrounding the nucleus in the Bohr-Rutherford Diagram.
Learn more about Bohr's model, here:
https://brainly.com/question/3964366
#SPJ1
if 100. ml of the solution in part 1 is concentrated by evaporation to give a final volume of 1.00 ml, what is the change in ph?
if 100. ml of the solution in part 1 is concentrated by evaporation to give a final volume of 1.00 ml, the change in pH decreases by 2 pH increases by 2.
what is evaporation?
Your body feels a little bit colder when you put perfume on it. Water and acetone operate similarly. This is a result of evaporation, which is the process by which a substance transforms from a liquid to a gas. The only distinction is the speed at which the cooling is experienced. Acetone causes the area of your body closest to the liquid to cool off the fastest. This occurs as a result of acetone evaporating more quickly than water or scent.The transfer of the liquid particles into the gaseous phase is known as evaporation, which often occurs on the surface of liquids.However, This procedure is therefore stated to include a shift in the liquids' condition of matter.
To learn more about Evaporation do follow
https://brainly.com/question/9339710
#SPJ4
calculate the ph for each case in the titration of 50.0 ml of 0.160 m hclo(aq) with 0.160 m koh(aq). use the ionization constant for hclo. what is the ph before addition of any koh? what is the ph after addition of 25.0 ml koh?
pH before addition of any KOH = 4.10
pH after addition of any KOH = 7.40
What is pH?The quantitative measure of the acidity or basicity of aqueous or other liquid solutions is known as pH. In pure neutral (neither acidic nor alkaline) water, the concentration of hydrogen ions is 10⁻⁷ gram-equivalents per liter, which means a pH of 7. Solutions below pH 7 are acidic. Solutions of pH greater than 7 are basic or alkaline.
For the given question:
HClO ⇄ H⁺ + ClO⁻
Kₐ = 4 × 10⁻⁸
Kₐ = [H⁺ ][ClO⁻]/[HClO]
Let, [H⁺ ] = [ClO⁻] = x
Since [HClO] = 0.160 M
Then,
4 × 10⁻⁸ = x²/0.160
x = 8.0 × 10⁻⁵ M which is [H⁺ ]
pH = -log[H⁺ ]
pH = 4.10
Now initial moles of HClO = 0.05L × 0.160 mol/L
= 8 × 10⁻³ mol
Addition of 25.0 ml KOH adds 4 × 10⁻³ mol of KOH which reacts with HCl forming 4 × 10⁻³ mol ClO⁻ leaving 4 × 10⁻³ mol of HClO
Concentration [ClO⁻] = 4 × 10⁻³ mol / 0.0750L
= 0.0533M
Now,
Kₓ = 4 × 10⁻⁸
= [H⁺ ](0.0533)/(0.0533)
[H⁺ ] = 4 × 10⁻⁸
pH = 7.40
To know more about pH visit:
https://brainly.com/question/2288405
#SPJ4
what is the abbreviated nomenclature for a 14-carbon omega-3 fatty acid that contains no other double bonds?
14:1 (delta 11) denotes the presence of a single double bond at carbon 11, starting at the carboxyl terminus, in the fatty acid.
How is omega-3 created?
The chloroplasts of plants, including grass, leaves, green algae, and other plants, produce omega-3s. Fish, animals, and humans are unable to make omega-3s on their own. Instead, they obtain them from this vegetation.
Explanation:
With the exception of steroids, fatty acids are carboxylic acids that provide the structural foundation of fats, oils, and all other types of lipids. More than 70 have been found in the natural world. They are typically unbranched, have an even number of carbon atoms, and can be divided into groups based on the existence and quantity of carbon-to-carbon double bonds.
14:1 (delta 11) denotes the presence of a single double bond at carbon 11, starting at the carboxyl terminus, in the fatty acid.
To learn more about omega-3 from the given link.
https://brainly.com/question/1373421
#SPJ4
The ratio :14 (delta 11) inside the fatty acid indicates a lone double bond at carbon 11, starting at the 3'-end.
How is omega-3 created?In their chloroplasts, plants such as grasses, leaves, cyanobacteria, and other flora all produce omega-3 fatty acids. Fish, animals, or humans cannot create omega-3s on their own. Instead, they get them from this facility.
Explanation:Fatty acids, which are naturally acidic, are the components of oils, oils, and other lipids as well as the legos of steroids. The natural world has more than 70 that have been discovered. They can be classified into categories based on the number and amount of coal single bonds, and are often spindle-shaped.
To know more about omega-3 visit:
https://brainly.com/question/1191084
#SPJ4
100. grams of ammonia (nh3) is dissolved in a 8.3 l solution. what is the molarity of the resulting solution? report your answer with the correct number of significant figures.
The molarity of a resulting solution is 0.707 mol/L
The molarity of a solution is defined by the amount of solute in moles divided by the volumes of solution in litres.
1 grams of ammonia is equals to 0.05872 mol
100 grams of ammonia is equals to 5.872 mol
Molarity of a resulting solution would be = 100 gm of NH3 / 8.3 L of a solution.
That is 5.872 moles of NH3 / 8.3 of a solution.
Molarity of a resulting solution would be 0.707 mol/L of a solution.
Learn more about molarity here https://brainly.in/question/1159016
#SPJ4
If the hydrogen atom emits red, blue-green, blue, and violet light, how many energy levels does it have in the visible region of the spectrum?.
If the hydrogen atom emits red, blue-green, blue, and violet light, 4 energy levels do it have in the visible region of the spectrum. Therefore, option B is correct.
What is the electromagnetic spectrum?The term electromagnetic spectrum can be defined as the range of frequencies of electromagnetic radiation and their respective photon energies and wavelengths.
Therefore, the four colors red, blue-green, blue, and violet light emitted by a hydrogen atom, are of four energy levels in the visible region of the electromagnetic spectrum.
Thus, option B is correct.
To learn more about the electromagnetic spectrum, follow the link;
https://brainly.com/question/23727978
#SPJ1
Your question is incomplete, most probably your question was
If the hydrogen atom emits red, blue-green, blue, and violet light, how many energy levels does it have in the visible region of the spectrum?
A. 3
B. 4
C. 5
D. 6
how many grams of h2so4 must be dissolved in 1.08 l of solution to generate a solution with a concentration of 2.69 m
The mass of H₂SO₄ that must dissolved in 1.08 liters of solution to make 2.69M solution is 271.52 grams.
The molarity of the substance is defined as the number of moles of solute per unit volume of solution in liters.
In this case,
The volume of the solution is 1.08 L.
The required molarity of the substance is 2.69M.
So,
we can write,
Molarity = Moles/Volume
Moles = Molariyt x volume
Moles =2.69 x 1.03
Moles = 2.77
Moles = Mass required/molar mass.
Molar mass of H₂SO₄ is 98 g/mol.
Putting values,
2.77=Mass required/98
Mass required = 271.52 grams.
So, 271.52 grams of H₂SO₄ is required to make 2.69M solution.
To know more about molarity, visit,
https://brainly.com/question/14469428
#SPJ4
What mass of iodine is produced when 14.2 grams of chlorine reacts with potassium iodine?
Answer:
50.8g of iodine is produced.
Explanation:
You have to do stoichiometry. To get grams of iodine produced.
Start with grams of chlorine that you're givenConvert these to moles (using molar mass)Convert moles of Cl2 into moles of I2Convert moles of I2 into grams of I2 (using molar mass)(Remember to multiply across the top and divide by the bottom)
[tex]\frac{14.2g Cl2}{1} * \frac{1 mol Cl2}{70.9g} * \frac{1 mol I2}{1mol I2} * \frac{253.8g}{1 mol I2}[/tex]
Write the balanced neutralization reaction that occurs between h2so4 and koh in aqueous solution. Phases are optional.
The equilibrium equation for the neutralization reaction between H2SO4 and KOH in aqueous solution is
[tex]H_2SO_4 + 2KOH= > K_2SO_4 +H_2O[/tex]
Neutralization is a chemical reaction in which acids and bases react quantitatively with each other. When reacted in water, the neutralization effect works because there is no excess hydrogen or hydroxide ions in the solution.
A neutralization reaction is when an acid and a base react to form a salt with water, and H+ and OH ions mix to form water. Neutralizing strong acids and strong bases results in a pH of 7.
The reaction between an acid and a base is called a neutralization reaction, which can be thought of as a kind of substitution reaction in which the protons of an acid are replaced while being given to another species.
Learn more about neutralization here: brainly.com/question/203541
#SPJ4
at 1 atm pressure the heat of sublimation of gallium is 277 kj/mol and the heat of vaporization is 271 kj/mol. how much heat is required to melt 0.500 mol of gallium at 1.00 atm pressure?
At 1 atm pressure the heat of sublimation of gallium is 277 kJ/mol and the heat of vaporization is 271 kJ/mol. heat is required to melt 0.500 mol of gallium at 1.00 atm pressure is 3 kJ.
The data given as follows :
The heat of sublimation of gallium = 277 kJ/mol
The heat of vaporization = 271 kJ/mol
The difference between the heat of sublimation of gallium and the heat of vaporization is given as :
ΔH = heat of sublimation - heat of vaporization
ΔH = 277 kJ/mol - 271 kJ/mol
ΔH = 6 kJ/mol
The heat required = n ΔH
= 0.500 × 6
= 3 kJ
Thus, At 1 atm pressure the heat of sublimation of gallium is 277 kJ/mol and the heat of vaporization is 271 kJ/mol. heat is required to melt 0.500 mol of gallium at 1.00 atm pressure is 3 kJ.
To learn more about heat of sublimation here
https://brainly.com/question/12999750
#SPJ4
3. if a nitrogen atom contains only single bonds to 2 h atoms and one cl atom, how many bonding electrons are assigned to the n atom when calculating the oxidation number?
There are 14 valence electrons assigned to the n atom.as it forms NH4CL lewis structure.
Lewis structure can be explained the bonding pair from the lone pair electrons.it shows non bonding electrons.hydrogen atom form one covalent bond.cl is anionic monoatomic ligand. H is a diatomic anionic ligand. Nitrogen is the least electronegative atom goes at the center.Hydrogen atoms always go on the outside of lewis structure.
In this, N has 5 valence electron.Hydrogen has 1 and cl has 7 valence electron.that gives total 14 valence electrons.cl has 3 lone pairs and n has a lone pair..
To learn more about lewis structure please visit:
https://brainly.com/question/20300458
#SPJ4
after performing a tlc experiment, a researcher determines the rf value of a component to be 2. he also notes that the solvent travelled a distance of 4cm on the plate. what can you conclude about this experiment?
The conclusion would be that Rf value is wrong.
Rf value refers to the retention factor. It is used in Thin Layer Chromatography, which is the technique to identify molecules based on their polarity. The. rf value is the ratio of distance travelled by solute to the distance travelled by solvent.
Solute can not move faster than solvent, hence, the distance travelled is always less. This means that numerator will be less than denominator making it less than 1. In general, the rf value lies between 0 and 1. Therefore, there is something wrong in the experiment.
Learn more about retention factor -
https://brainly.com/question/24731831
#SPJ4
what are the procedure in removing carbon (iv) oxide from hair
Answer:
There are two primary hair removal methods with electrolysis: galvanic and thermolytic. Galvanic hair removal chemically destroys the hair follicle. Thermolytic removal uses heat to destroy the follicle.
Explanation:
Order the sequence of ideas that led to the current model of the atom. Place a number in front of each event to show the correct order.
The correct sequence of ideas that led to the current model of the atom is as follows:
1. Dalton developed the theory that all matter is made of atoms.
2. Thomson discovered that atoms contain electrons.
3. Rutherford discovered that atoms have a nucleus.
4. Bohr developed the model in which electrons orbit the nucleus.
5. Schrödinger developed the electron cloud model of the atom.
What is an atom?An atom is the smallest unit of a chemical element that can take part in a chemical reaction.
The atomic theory of matter is the theory that all matter is composed of atoms.
Atoms are composed of electrons, protons, and neutrons.
Several scientists contributed ideas that led to the current model of the atom. These scientists include:
John Dalton J.J Thomson,Ernest RutherfordNeils BohrErwin SchrödingerLearn more about the atom at: https://brainly.com/question/17545314
#SPJ1
Complete question:
Order the sequence of ideas that led to the current model of the atom. Place a number in front of each event to show the correct order.
Rutherford discovered that atoms have a nucleus.
Dalton developed the theory that all matter is made of atoms.
Schrödinger developed the electron cloud model of the atom.
Bohr developed the model in which electrons orbit the nucleus.
Thomson discovered that atoms contain electrons.
a shorter, easier way to show chemical reactions, using symbols instead of words, is called a group of answer choices
A shorter, easier way to show chemical reactions, using symbols instead of words, is called a Chemical equation.
All the elements in chemistry have specific name and properties. Along with this, they all have a particular sign like Na for sodium, Ar for Argon and K for potassium.
Rather than writing the full name in words of the elements, we write only the symbols of the element along with the products and the reactants separated by using a arrow pointing towards products side.
For example,
Chemical reaction: Sodium hydroxide reacts with Hydrogen chloride to form Sodium chloride and water.
Chemical equation: NaOH + HCl → NaCl + H₂O.
So, as we can see from the example, the chemical equation is much more easier to understands and shorter.
To know more about chemical equation, visit,
https://brainly.com/question/26694427
#SPJ4
q12 (1pts) which one of the following molecules has an atom with an incomplete octet? a) nf3 b) h2o c) ascl3 d) geh4 e) bf3
The following molecules has an atom with an incomplete octet is BF₃.
the following molecules given as follows :
a) NF₃ - it follow the octet rule. all the atom present have there octet complete. the molecule is stable;
b) H2O - all the have complete octet.
c) AsCl₃ - all the atoms have 8 electron in valence shell and follow octet rule.
d) GeH₄ - thos molecule also follow the octet rule
e) BF₃ - not follow the octet and have incomplete octet. Boron atom have in complete octet.
thus, The following molecules has an atom with an incomplete octet is BF₃.
To learn more about incomplete octet here
https://brainly.com/question/11626767
#SPJ4
1. What might cause cosmic radiation to be deflected around Earth?
find the volume of 0.250 m sulfuric acid necessary to react completely with 74.3 g sodium hydroxide.
The volume of 0.250 m sulfuric acid necessary to react completely with 74.3 g sodium hydroxide is 3.7 L.
The chemical reaction of sulfuric acid and sodium hydroxide is given as below:
H2SO4 + 2NaOH ------- Na2SO4 + 2H2O
From above, we noticed that, one mole of sulfuric acid react with two moles of sulfuric acid.
Therefore, firstly we convert grams of sulfuric acid into moles.
As we know that, molar mass of sodium hydroxide is 40 g.
What is mole?It is defined as the given mass to the molar mass of substance.
Mathematically,
Moles = Given mass / molar mass
Given mass of sulfuric acid = 74.3 g
By substituting all the values, we get
Moles = 74.3 / 40
= 1.85 mol
So, 1/2 moles of sulfuric acid one moles of sodium hydroxide.
Or, 1.85 moles of sodium hydroxide react with 1/2 × (1.85) moles of sulfuric acid.
1.85 moles of sodium hydroxide react with 0.925 moles of sulfuric acid.
Now,
Concentration of sulfuric acid = 0.250 M
Moles of sulfuric acid = 0.925 mol
C = m/ V
V = m/ C
= 0.925/ 0.250 = 3.7 L
Thus, we concluded that the volume of 0.250 m sulfuric acid necessary to react completely with 74.3 g sodium hydroxide is 3.7 L.
learn more about Moles:
https://brainly.com/question/15209553
#SPJ4
the kb for a weak base is 1.00 x 10-9. what is the % ionization of a 2.00 m aqueous solution of the base?
The % ionization of a 2.00 m aqueous solution of the base is 0.0022%
What is pOH ?
It is a measure of the hydroxide ion (OH-) concentration of a solution. Therefore, it can be used as an indicator of the alkalinity of a substance and, in some cases, also as an indicator of electrical conductivity. pOH is the negative logarithm of hydroxide ion content and is given by the formula:
pOH = 14 - pH
OH = Kw /OH+
where Kw = self-ionization content of water.
Applying the logarithm on both sides, the more general form of the equation is: In relation to corrosion, pOH can be used as an indicator of electrolyte conductivity in galvanic cells. The conductivity of a solution depends on the concentration of ions that act as charge carriers. The higher the concentration of OH ions, the stronger the alkalinity, the higher the conductivity of the electrolyte, and the higher the rate of galvanic corrosion.
To know more about the pOH ,click the link given ;
https://brainly.com/question/27586088
#SPJ4
what salt water body does the water you use in your home travel to?
Other natural therapies, such as salt water, can help soothe a sore throat. Gargling with salt water works well to destroy bacteria, reduce discomfort, and loosen mucus.
What does "remedying a situation" mean?When you fix something that is broken or harmful, you enhance it. To correct the situation, a lot has been done inside. Synonyms include rectify, redress, and reform. More remedies' opposites.
Describe the four treatments.The four primary categories of judicial remedies are (1) damages, (2) restitution, (3) coercive remedies, and (4) declaratory remedies. These categories are organized according to their intended use. Damages are typically used as a remedy to make up for any harm that has been done to the affected party.
To know more about remedies visit:
https://brainly.com/question/15126016
#SPJ13
22) in the polysaccharide amylose, large numbers of monosaccharides are linked together through . a) alpha 1-4 glycosidic linkages b) beta 1-4 glycosidic linkages c) alpha 1-6 glycosidic linkages d) beta 1-6 glycosidic linkages e) none of the above
In the polysaccharide amylose,a large number of monosaccharides are linked together through alpha 1-4 glycosidic linkages.
Alpha 1-4 linkage is a stored form of sugar in plant. In this carbon atom 1 and 4 of the the two monomers forms a glycosidic bond. Polysaccharides are long chain forms of monosaccharides linked together by glycosidic bonds.A glycosidic bond is a covalent bond that joins a carbohydrate molecule to another group.this bond gives glycogen that is suitable for energy storage.
Amylose is plant starch made from monosaccharide connected through alpha 1-4 linkages.monosaccharides are the simplest form of sugar.from monosaccharides, all carbohydrates are built.
To learn more about glycosidic linkage please visit:
https://brainly.com/question/28902141
#SPJ4
What element has the highest electrical conductivity?
Mg
H
He
CI
Helium(He) will have the highest electrical conductivity.
Magnesium (Mg) is a metal, so it is electrically conductive in nature, though not as much as hydrogen and helium.
Above certain temperatures, hydrogen(H) is also electrically conductive.
Helium(He) The ease with which an electric charge or heat can pass through a material is measured as conductivity. A conductor is a material that resists the flow of an electric current or thermal energy very little. Metals are generally good conductors of electricity.
Because chlorine(Cl) is a nonmetal, it has the lowest electrical conductivity.
Learn more about electrical conductivity :
https://brainly.com/question/21791041
