13. one of the two products of the reaction of baking soda and vinegar is carbonic acid (h2co3), which immediately forms water and the gas you identified after exposure to the flaming and glowing splints. write a balanced equation showing the decomposition of carbonic acid.

A broad rule of thumb states that an atom with one, two, three, five, six, or seven valence electrons is reactive, however an atom with four valence electrons may be reactive or unreactive depending on the particular reaction conditions.

Since valence electrons are crucial, atoms are frequently depicted by straightforward diagrams that just display their valence electrons. Three of these electron dot diagrams are displayed below.

Valence electrons play a major role in determining an atom's chemical reactivity. Atoms with a fully filled valence electron shell have a propensity to be chemically inert. Very reactive atoms have one or two valence electrons.

To know more about electrons visit:-

https://brainly.com/question/28977387

#SPJ1

They are all describing events that can occur in a baseball game, where a pitcher is throwing a ball to a batter and an umpire is calling the result of the play.

None of the scenarios involve a chemical reaction between reactant A and B. They all describe events in a baseball game. A chemical reaction involves a change in the chemical composition of one or more substances, resulting in the formation of new substances with different properties. In the scenarios described, there is no mention of any substances undergoing a chemical change, so no chemical reaction is occurring.

In all the scenarios described, there is no indication of any chemical reaction occurring between any reactants. All the scenarios are related to the sport of baseball, in which a pitcher throws a ball (the reactant) towards the batter who tries to hit the ball with a bat. The umpire is responsible for making calls, determining if the ball is a strike, a foul ball, or a home run based on the specific rules of the game.

To know more about the Pitcher, here

https://brainly.com/question/4519189

#SPJ4

In general, there are three types of bonds: sigma bonds (single bonds), one sigma bond and one pi bond (double bonds), and one sigma bond and two pi bonds (triple bonds).

Sigma bonds are the simplest type of covalent bond, formed by the direct overlap of atomic orbitals between two component atoms. These bonds result in a strong, stable connection and are typically found in single bonds.

In double bonds, there is one sigma bond and one pi bond between the component atoms. The sigma bond is formed as mentioned earlier, while the pi bond results from the sideways overlap of p orbitals, creating a bond above and below the sigma bond plane.

This combination of bonds leads to a shorter and stronger connection between the atoms compared to a single bond.

Lastly, in triple bonds, there is one sigma bond and two pi bonds between the component atoms.

The sigma bond is formed in the same manner as single and double bonds, while the two pi bonds occur when two sets of p orbitals overlap perpendicularly to each other, with one set above and below, and the other set in front and behind the sigma bond plane.

This configuration leads to an even shorter and stronger bond compared to double bonds.

To identify the bond types between component atoms, you will need to examine the molecular structure and electron sharing between the atoms involved. Count the number of shared electron pairs to determine if it's a single (sigma), double (sigma and pi), or triple bond (sigma and two pi bonds).

To know more about bonds, visit:

https://brainly.com/question/17405470#

#SPJ11

Ans 1  = 2 fe +3 cl2 = 2 fecl3

blank 1 = 2

blank 2 = 3

blank 3 = 2

Ans.2 = 4fe +3 o2 = 2fe2o3

blank 1 = 4

blank 2 = 3

blank 3 = 2

Ans.3 = c6h6o3 +H2o = 2c2h3

blank 1 = 1

blank 2 = 1

blank 3 = 2

The mass of copper sulfate in the given solution is 24 grams.

Copper sulfate, also known as cupric sulfate or copper (II) sulfate, is a chemical compound that consists of copper ions and sulfate ions. It has the molecular formula CuSO4 and is commonly used in agriculture, mining, and chemical industries.

In the given scenario, we have a solution of copper sulfate with a volume of 2 dm3 and a concentration of 12 g/dm3. This means that for every 1 dm3 of the solution, there are 12 grams of copper sulfate present. To find the mass of copper sulfate in the entire 2 dm3 solution, we can use the following formula:

Mass = Concentration x Volume

Substituting the given values, we get:

Mass = 12 g/dm3 x 2 dm3
Mass = 24 g

Therefore, the mass of copper sulfate in the given solution is 24 grams.

To know more about copper sulfate, visit:

https://brainly.com/question/22560035#

#SPJ11

1) The solution is saturated. 2) 40 grams of KCl has dissolved in 100 grams.  3) 50 grams of KClO₃ will dissolve. 4) 75 grams of H₂O can dissolve 24.6 grams. 5) To saturate 28.4 grams of CaCl₂ must be added.

Saturated is a term used to describe a state of being filled to capacity, or containing the maximum amount possible. It is most commonly used in reference to liquids, where it indicates that no more of a given substance can be dissolved into the liquid. In chemistry, saturation refers to the point at which a solution has reached its maximum solubility.

1) The solution is saturated because 65 grams of Pb(NO₃)₂ has dissolved in 100 grams of H₂O at 25°C.

2) 40 grams of KCl has dissolved in 100 grams of H₂O at 10°C, so no more will dissolve.

3) 50 grams of KClO₃ will dissolve in 92.5 grams of H₂O at 70°C.

4) 75 grams of H₂O can dissolve 24.6 grams of K₂Cr₂O7 at 90°C.

5) At 25°C, 59 grams of CaCl₂ has dissolved in 100 grams of H₂O. To saturate the solution, an additional 28.4 grams of CaCl₂ must be added.

To learn more about saturated

https://brainly.com/question/2078413

#SPJ4

Using two styrofoam cups as a calorimeter is an economical way of determining heat values because styrofoam is a good insulator, which means that it prevents heat exchange between the system and the surroundings.

Therefore, it is a good choice for an adiabatic container. Additionally, styrofoam cups are readily available and disposable, making them a convenient and low-cost option for conducting experiments.

One of the major pitfalls of using this system is that it is not a completely closed system, which means that heat can still escape or enter from the surroundings, although at a slower rate than if the cups were made of a different material.

This can result in errors in the measurement of the heat change, as the actual heat change of the system may be different from the measured heat change. This is especially true for reactions that produce or consume gases, as these gases can escape from the cups and contribute to the heat exchange with the surroundings.

Therefore, it is important to minimize heat loss or gain to the surroundings as much as possible, such as by using a lid or insulating the cups further.

To know more about calorimeter refer to-

https://brainly.com/question/4802333

#SPJ11

The maximum amount of Al₂O₃ that can be produced in this reaction is 1.00 kg, which confirms that aluminium is the limiting reactant.

To determine if aluminium is the limiting reactant in this reaction, we need to first calculate the theoretical yield of the reaction using both reactants.

From the balanced equation, we can see that for every 2 moles of aluminium, we need 1 mole of iron oxide.

1.00 kg of aluminium has a mass of 1000 g / 27 g/mol = 37.04 moles.

3.00 kg of iron oxide has a mass of 3000 g / (2 x 56 g/mol + 3 x 16 g/mol) = 13.39 moles.

Since we need half as many moles of iron oxide as aluminium for the reaction, the aluminium is the limiting reactant.

To calculate the theoretical yield of the reaction, we need to use the amount of aluminium as the limiting factor.

Since the balanced equation shows that 2 moles of aluminium react to produce 1 mole of Al₂O₃, we can calculate the theoretical yield of Al₂O₃ as:

37.04 moles Al x (1 mol Al₂O₃ / 2 mol Al) x (2 x 27 g/mol Al₂O₃) = 999.5 g or 1.00 kg (rounded to two significant figures).

Learn more about limiting reactants at https://brainly.com/question/26905271

#SPJ11

The scientist could infer that the sedimentary rock in the Himalaya Mountains was formed through processes like weathering, erosion, deposition, and lithification. The rock cycle played a crucial role in creating this landform.

Tectonic plate movement and the collision between the Indian and Eurasian plates led to the uplift and folding of these sedimentary layers, ultimately forming the high elevation mountain range.

Based on the rock cycle and the formation of major landforms, the scientist could infer that the sedimentary rock was most likely formed from the accumulation of sediment in a low-lying area, such as a river delta or shallow sea. Over time, the sediment was buried and compacted, eventually forming sedimentary rock.

This rock was then subjected to tectonic forces, likely as a result of the collision of two tectonic plates, which caused it to be uplifted and exposed at a high elevation in the Himalaya Mountains.

Therefore, the scientist could infer that the sedimentary rock became part of the mountain range through a combination of geological processes, including sedimentation, compaction, tectonic activity, and uplift.

To know more about rock cycle:
https://brainly.com/question/29548493

#SPJ11

Limiting reactants are the reagents that are used up first in a chemical reaction, and determine the amount of product that can be formed.

Excess reactants are reagents that, once the limiting reactant has been used up, are still present in the reaction mixture.

The limiting reactant is important because it is the reagent that limits the amount of product that can be produced. When excess reactants are present, they do not contribute to the amount of product that can be produced and are thus considered to be "excess" material.

This excess material can cause problems in a reaction, such as unwanted byproducts or the formation of side reactions. Therefore, it is important to carefully control the amounts of reactants that are used in a reaction to ensure that the desired product is formed in the maximum possible yield.

Know more about Chemical reaction here

https://brainly.com/question/29039149#

#SPJ11

Acid rain water with a pH of 2 is 10,000 times more acidic than unpolluted rainwater with a pH of 6.

The pH scale is logarithmic, meaning that each change in pH by one unit represents a tenfold change in acidity. Therefore, the difference in pH between acid rain (pH 2) and unpolluted rainwater (pH 6) is four units. To calculate the difference in acidity, we take the antilogarithm of four, which is 10,000. This means that acid rain is 10,000 times more acidic than unpolluted rainwater.

Mathematically, this can be shown as:

[H⁺] in acid rain / [H⁺] in unpolluted rainwater

Therefore, acid rain is 10,000 times more acidic than unpolluted rainwater.

To learn more about Acid rain water, here

https://brainly.com/question/22143130
#SPJ4

(a) The pH of the nitric acid solution is approximately 0.28.

(b) The pOH of the nitric acid solution is approximately 13.72

(c) The hydroxide ion concentration of the nitric acid solution is approximately 1.89 x 10^-14 M.

a. To calculate the pH of the solution, we can use the formula:

pH = -log[H3O+]

where;

Substituting the given value:

pH = -log(0.53) ≈ 0.28

b. The pOH of the solution can be calculated using the formula:

pOH = -log[OH-]

where;

To find the pOH, we need to first calculate the [OH-]. We know that:

Kw = [H3O+][OH-] = 1.0 x 10^-14

where;

Rearranging the equation, we can solve for [OH-]:

[OH-] = Kw / [H3O+]

[OH-] = 1.0 x 10^-14 / 0.53

[OH-] ≈ 1.89 x 10^-14

Now, we can calculate the pOH:

pOH = -log(1.89 x 10^-14) ≈ 13.72

c. We can use the [OH-] concentration calculated in part (b) to find the hydroxide ion concentration:

[OH-] = 1.89 x 10^-14

Learn more about pH here: https://brainly.com/question/26424076

#SPJ1

The solubility of the magnesium fluoride, MgF₂, in the water is 1.5 × 10⁻² g/l. The solubility  of magnesium fluoride in 0.13 M of the sodium fluoride, NaF is 0.88 M.

The solubility, Ksp = 1.5 × 10⁻² g/L

The concentration , NaF = 0.13 M

The solubility of the magnesium fluoride that is MgF₂ is expressed as :

The solubility of the magnesium fluoride = Ksp / NaF²

The solubility of the magnesium fluoride = 1.5 × 10⁻² / (0.13 )²

The solubility of the magnesium fluoride = 0.88 M

Therefore, the solubility of the magnesium fluoride  in 0.13 M of the sodium fluoride is 0.88 M.

To learn more about solubility here

https://brainly.com/question/14524193

#SPJ4

1. Neopentyl bromide will react more slowly than 1-bromobutane with sodium iodide in acetone. The difference in reactivity is due to steric hindrance. Neopentyl bromide is a primary alkyl bromide with three bulky methyl groups attached to the primary carbon, which creates significant steric hindrance.

2. Allyl bromide will react faster than allyl chloride, and 1-bromobutane will react faster than 1-chlorobutane with sodium iodide in acetone. The nature of the leaving group affects the rate of the SN2 reaction.

1. Neopentyl bromide will react more slowly than 1-bromobutane with sodium iodide in acetone. The difference in reactivity is due to steric hindrance. Neopentyl bromide is a primary alkyl bromide with three bulky methyl groups attached to the primary carbon, which creates significant steric hindrance. InIn contrast, 1-bromobutane only has one methyl group attached to the primary carbon. In the SN2 reaction, the nucleophile approaches the primary carbon from the backside and displaces the leaving group. The bulky methyl groups in neopentyl bromide create a greater steric hindrance, making it more difficult for the nucleophile to approach the primary carbon from the backside and displace the leaving group. This results in a slower reaction rate compared to 1-bromobutane.

2. Allyl bromide will react faster than allyl chloride, and 1-bromobutane will react faster than 1-chlorobutane with sodium iodide in acetone. The nature of the leaving group affects the rate of the SN2 reaction. In general, a good leaving group is one that can stabilize the negative charge that is formed when it departs. Halogens are good leaving groups because they can stabilize the negative charge through resonance. However, chlorine is a weaker leaving group than bromine because it is larger and has a weaker bond to the carbon. Therefore, it is more difficult to displace the leaving group in allyl chloride and 1-chlorobutane than in allyl bromide and 1-bromobutane, leading to slower reaction rates. Overall, the order of reactivity in SN2 reactions is typically: primary > secondary > tertiary, and iodide > bromide > chloride as nucleophiles, and chloride < bromide < iodide as leaving groups.
Visit to know more about steric hinderance:-

https://brainly.com/question/6419720

#SPJ11

The DOE (Department of Energy) likely picked reclaiming the water before it reaches the river as its goal to address environmental concerns and potential health hazards associated with contaminated water.

Water pollution can have significant negative impacts on aquatic life, human health, and the environment as a whole. Reclaiming the water before it reaches the river would prevent the contaminated water from spreading and potentially causing harm to people, animals, and the surrounding ecosystem.

Additionally, the DOE may have a legal responsibility to prevent the release of contaminated water into public waterways under environmental protection laws.

By reclaiming the water, the DOE can fulfill its obligation to protect the environment and public health while also promoting sustainable water use and management practices.

To know more about environmental concerns refer to-

https://brainly.com/question/30008376

#SPJ11

There are 1.142 grams of C₃H₆ in the 652 mL of sample of the gas at STP.

Using ideal gas equation,

PV = nRT,  pressure is P, volume is V, number of moles in n, gas constant is R, the temperature is T. At STP, the pressure is 1 atm, the temperature is 273 K, and the molar volume is 22.4 L.

We can use the following steps to calculate the number of moles of C₃H₆ present in 652 mL of the gas at STP:

Convert the volume to liters:

652 mL = 0.652 L

Calculate the number of moles using the ideal gas law:

PV = nRT

(1 atm) (0.652 L) = n (0.0821 L·atm/mol·K) (273 K)

n = 0.0272 mol

Calculate the mass of C₃H₆ using its molar mass:

m = n × M

M(C₃H₆) = 42.08 g/mol

m = 0.0272 mol × 42.08 g/mol

m = 1.142 g

It is nearest to option D, hence the mass is 1.22 grams.

To know more about ideal gas equation, visit,

https://brainly.com/question/27870704

#SPJ4

To produce 500 g of lithium oxide (Li2O), you will need 232.12 g of lithium (Li) and 187.38 L of oxygen (O2)

To produce 500 g of lithium oxide (Li2O), you'll first need to determine the required amounts of lithium (Li) and oxygen (O2) based on the balanced equation: 4Li + O2 --> 2Li2O.

1. Calculate the moles of Li2O needed:
Molar mass of Li2O = (2 * 6.94) + 16 = 29.88 g/mol
500 g Li2O / 29.88 g/mol = 16.73 moles Li2O

2. Calculate the moles of Li needed (using stoichiometry):
4 moles Li / 2 moles Li2O = 16.73 moles Li2O * (4 moles Li / 2 moles Li2O) = 33.46 moles Li

3. Calculate the mass of Li needed:
Molar mass of Li = 6.94 g/mol
33.46 moles Li * 6.94 g/mol = 232.12 g Li

4. Calculate the moles of O2 needed:
1 mole O2 / 2 moles Li2O = 16.73 moles Li2O * (1 mole O2 / 2 moles Li2O) = 8.365 moles O2

5. Calculate the volume of O2 needed (assuming standard temperature and pressure):
Molar volume of an ideal gas at STP = 22.4 L/mol
8.365 moles O2 * 22.4 L/mol = 187.38 L O2

In summary, to produce 500 g of lithium oxide (Li2O), you will need 232.12 g of lithium (Li) and 187.38 L of oxygen (O2).

To know more about Mole Concept:

https://brainly.in/question/48859318

#SPJ11

The difference in the rate of sugar and acid reaction compared to the reaction between KI(aq) and Pb(NO₃)₂(aq) is due to the type of chemical bonding involved.

The reaction between sugar and acid involves covalent bonding, which is a strong bond that requires significant energy input to break. This type of bonding is responsible for the slow rate of the sugar and acid reaction.

In contrast, the reaction between KI(aq) and Pb(NO₃)₂(aq) involves ionic bonding, which is a much weaker bond than covalent bonding. As a result, the ions in the reactants are more easily separated, leading to a faster reaction rate.

Ionic bonding involves the transfer of electrons from one atom to another, whereas covalent bonding involves the sharing of electrons between atoms. This difference in electron sharing or transfer contributes to the different reaction rates observed between covalent and ionic bond containing compounds.

To know more about chemical bonding, refer here:

https://brainly.com/question/15444131#

#SPJ11

The strongest type of intermolecular force present between the hydrocarbon chains of neighboring stearic acid molecules is the van der Waals dispersion force, also known as London dispersion force.

This force arises due to temporary dipoles that are created by the random motion of electrons in the molecule. These temporary dipoles induce similar dipoles in the neighboring molecules, leading to an attractive force between them.

In stearic acid, the hydrocarbon chain is nonpolar, which means that there are no permanent dipoles in the molecule. However, the electrons in the molecule are not always distributed symmetrically, leading to temporary dipoles that can induce similar dipoles in other stearic acid molecules.

The strength of the van der Waals force depends on the size of the molecule and the number of electrons in it. Stearic acid has a relatively long hydrocarbon chain, which means that it has a large surface area and a large number of electrons, making the van der Waals force between its molecules relatively strong.

To know more about London dispersion force refer to-

https://brainly.com/question/20514601

#SPJ11

The complete reaction would be; 2 NaCl --> 2 Na + Cl2 + H

Energy is released when an exothermic process continues in the form of heat, light, or sound. In this way, the reactants' chemical bonds initially hold the energy, which is later released as the bonds are broken and new ones are formed.

Heat or other forms of energy are released as a result of the energy differential between the reactants and the reaction's products. In an exothermic process, energy is assumed to be on the side of the products.

Learn more about energy:https://brainly.com/question/26219779

#SPJ1

The mass of the cube of titanium is 2.02 x 10^6 micrograms.

To find the mass of the cube of titanium in micrograms, we first need to find its volume:

Volume = (edge length)^3 = (3.67 x 10^4 micrometers)^3

            = 4.49 x 10^14 cubic micrometers

Next, we need to convert the density of titanium from grams per cubic centimeter to micrograms per cubic micrometer:

4.5 g/cm^3 = 4.5 x 10^9 micrograms/ (10^4 micrometers)^3

                   = 4.5 x 10^9 micrograms/ (10^12 cubic micrometers)

Now we can calculate the mass of the cube:

Mass = Volume x Density

         = 4.49 x 10^14 cubic micrometers x 4.5 x 10^9 micrograms/ (10^12 cubic micrometers)

         = 2.02 x 10^6 micrograms

Learn more about mass at https://brainly.com/question/86444

#SPJ11

There are 0.596 moles of nickel(III) phosphate in 98.3 grams of the compound.

To calculate the number of moles in 98.3 grams of nickel(III) phosphate, we need to use the formula:

moles = mass (in grams) / molar mass

First, we need to find the molar mass of nickel(III) phosphate. To do this, we need to know the chemical formula of the compound. Nickel(III) phosphate has the chemical formula NiPO4. The molar mass of nickel(III) phosphate can be calculated by adding the atomic masses of nickel, phosphorus, and four oxygen atoms:

Molar mass of NiPO4 = (1 x atomic mass of Ni) + (1 x atomic mass of P) + (4 x atomic mass of O)

Molar mass of NiPO4 = (1 x 58.69) + (1 x 30.97) + (4 x 15.99)

Molar mass of NiPO4 = 164.67 g/mol

Now we can use the formula above to calculate the number of moles:

moles = 98.3 g / 164.67 g/mol

moles = 0.596 moles

Therefore, there are 0.596 moles of nickel(III) phosphate in 98.3 grams of the compound.

To know more about compound, visit:

https://brainly.com/question/13516179#

#SPJ11

The compound Ti(NO3)4 dissociates in water as:

Ti(NO3)4 → Ti^4+ + 4 NO3^-

This means that each formula unit of Ti(NO3)4 produces 4 nitrate ions (NO3^-) in solution.

Therefore, the concentration of NO3^- ions in a 0.25 M solution of Ti(NO3)4 is:

0.25 M Ti(NO3)4 × 4 NO3^- ions / 1 Ti(NO3)4 formula unit = 1.00 M NO3^- ions

So, the concentration of NO3^- ions in a 0.25 M solution of Ti(NO3)4 is 1.00 M.

To know more about dissociates refer here

https://brainly.com/question/30983331#

#SPJ11

the answers to the questions based on the element sodium:

Is it metal? - Yes

Is it a non-metal? - No

Is it gas at room temperature? - No

Is it a solid at room temperature? - Yes

Is it a liquid at room temperature? - No

Is it in the first row (period) of the periodic table? - No

Is it in the second row (period) of the periodic table? - Yes

Is it in the third row (period) of the periodic table? - No

Is it in the fourth row (period) of the periodic table? - No

Is it in the fifth row (period) of the periodic table? - No

Is it in the sixth row (period) of the periodic table? - No

Is it in the seventh row (period) of the periodic table? - No

Is it in the eighth row (period) of the periodic table? - No

Is it a noble gas? - No

Is it a halogen? - No

Is it an alkali metal? - Yes

Is it an alkaline earth metal? - No

Is it a transition metal? - No

Does its symbol start with the letter "C"? - No

Does it have an atomic number greater than 50? - No (Sodium has an atomic number of 11)

Periodic Table 20 Questions" is a game where one player thinks of an element from the periodic table, and the other player asks up to 20 yes or no questions to guess the element.

The questions are usually related to the element's properties, such as its atomic number, symbol, group, or period, as well as its physical and chemical characteristics.

learn more about the Periodic table here

https://brainly.com/question/15987580

#SPJ1

the question is incomplete. complete question is

The element is sodium(Na)

Is it metal? - Yes or No

Is it a non-metal? - Yes or No

Is it gas at room temperature? - Yes or No

Is it a solid at room temperature? - Yes or No

Is it a liquid at room temperature? - Yes or No

Is it in the first row (period) of the periodic table? - Yes or No

Is it in the second row (period) of the periodic table? - Yes or No

Is it in the third row (period) of the periodic table? - Yes or No

Is it in the fourth row (period) of the periodic table? - Yes or No

Is it in the fifth row (period) of the periodic table? - Yes or No

Is it in the sixth row (period) of the periodic table? - Yes or No

Is it in the seventh row (period) of the periodic table? - Yes or No

Is it in the eighth row (period) of the periodic table? - Yes or No

Is it a noble gas? - Yes or No

Is it a halogen? - Yes or No

Is it an alkali metal? - Yes or No

Is it an alkaline earth metal? - Yes or No

Is it a transition metal? - Yes or No

Does its symbol start with the letter "C"? - Yes or No

Does it have an atomic number greater than 50? - Yes or No

Non-smokers can breathe 3.6 liters of air per minute at sea level (1 atm).

At high altitudes, pressure decreases to 0.5 atm. Non-smokers can breathe 7.2L of air per minute. How many liters of air can they breathe at sea level? (1 atm)

To answer this question, we will use the Boyle's Law, which states that the product of pressure (P) and volume (V) is constant for a given amount of gas at a constant temperature. In this case, we have two different pressure conditions: high altitudes (0.5 atm) and sea level (1 atm).

We are given the volume of air breathed at high altitudes (7.2L) and asked to find the volume at sea level.

Step 1: Write down the given information:
P1 = 0.5 atm (pressure at high altitudes)
V1 = 7.2L (volume of air breathed at high altitudes)
P2 = 1 atm (pressure at sea level)
V2 = ? (volume of air breathed at sea level; this is what we need to find)

Step 2: Apply Boyle's Law:
P1 × V1 = P2 × V2

Step 3: Plug in the given values and solve for V2:
(0.5 atm) × (7.2L) = (1 atm) × V2

Step 4: Solve for V2:
V2 = (0.5 × 7.2) / 1
V2 = 3.6L

So, non-smokers can breathe 3.6 liters of air per minute at sea level (1 atm).

To know more about Non-smokers, visit:

https://brainly.com/question/13575402#

#SPJ11

When the balloon is submerged in water at a depth where the pressure is 4.7 atm and the temperature is 15 °C, its volume will be approximately 0.995 L.

From the ideal gas equation, we can use the combined gas law formula, which is:

(P1 × V1) / T1 = (P2 × V2) / T2

Here, P1 = 1.1 atm (initial pressure), V1 = 3.7 L (initial volume), T1 = 30 °C (initial temperature), P2 = 4.7 atm (final pressure), and T2 = 15 °C (final temperature). We need to find V2 (final volume).

First, convert the temperatures to Kelvin by adding 273.15:

T1 = 30 + 273.15 = 303.15 K

T2 = 15 + 273.15 = 288.15 K

Now, plug in the values into the combined gas law formula and solve for V2:

        (P1 × V1) / T1 = (P2 × V2) / T2

(1.1 × 3.7) / 303.15 = (4.7 × V2) / 288.15

    (4.07) / 303.15 = (4.7 × V2) / 288.15

Now, solve for V2:

V2 = (4.07 × 288.15) / (303.15 × 4.7)

V2 ≈ 0.995 L

To know more about the ideal gas equation, click below.

https://brainly.com/question/20897725

#SPJ11

The concentration of acetic acid is 0.246 M, option A is correct.

The balanced chemical equation for the reaction is:

2HC₂H₃O₂ + Ba(OH)₂ → Ba(C₂H₃O₂)₂ + 2H₂O

According to the equation, one mole of barium hydroxide and two moles of acetic acid react.

The number of moles of Ba(OH)₂ used in the reaction is:

0.497 mol/L × 0.0126 L = 0.00628 mol

Since the reaction is a 1:2 ratio, the number of moles of acetic acid is:

0.00628 mol × 2 = 0.01256 mol

The volume of acetic acid used in the reaction is 51 mL or 0.051 L.

The concentration of acetic acid can be calculated as follows:

concentration = number of moles ÷ volume

concentration = 0.01256 mol ÷ 0.051 L

concentration = 0.246 M

Hence, option A is correct.

To learn more about concentration follow the link:

brainly.com/question/10725862

#SPJ4

The complete question is:

24. 51 mL of acetic acid, HC₂H₃O₂, of unknown concentration was titrated with the 12. 6 mL of 0. 497 M Ba(OH)₂ to reach the equivalence point. Determine the concentration of the acetic acid. 2HC₂H₃O₂ + Ba(OH)₂ → Ba(C₂H₃O₂)₂ + 2H₂O

A. 0.246 M

B. 0.836 M

C. 0.359 M

D. 0.511 M

E. 0.979 M

Based on the properties of elements, the correct options for the reactivity and composition of elements and compounds are:

Reactive elements are elements that readily react with other elements by gaining or losing electrons.

Reactive elements may be metals such as alkali metals and alkaline earth metals or they may be non-metals such as halogens.

Considering the given questions about the properties of elements, the correct options are:

Learn more about reactive elements at: https://brainly.com/question/30210122

#SPJ1

6.00 moles of carbon dioxide are produced when 6.00 moles of methane are used. The correct answer is (d) 6.0.

To determine how many moles of carbon dioxide are produced when 6.00 moles of methane are used, we need to look at the balanced chemical equation: CH4 + 2O2 -> CO2 + 2H2O.

First, we can observe that 1 mole of methane (CH4) reacts with 2 moles of oxygen (O2) to produce 1 mole of carbon dioxide (CO2) and 2 moles of water (H2O). This means that the mole ratio of methane to carbon dioxide is 1:1.

Since we have 6.00 moles of methane, we can use the mole ratio to find the number of moles of carbon dioxide produced.


1. Identify the mole ratio of methane to carbon dioxide from the balanced chemical equation (1:1).
2. Multiply the given moles of methane (6.00 moles) by the mole ratio to find the moles of carbon dioxide.

Calculation:
6.00 moles CH4 × (1 mole CO2 / 1 mole CH4) = 6.00 moles CO2

So, 6.00 moles of carbon dioxide are produced when 6.00 moles of methane are used. The correct answer is (d) 6.0.

To know more about carbon dioxide, visit:

https://brainly.com/question/3049557#

#SPJ11

An element is made up of only one type of atom.

A compound is made up of different atoms that are chemically joined together.

A mixture is made up of two or more different atoms or compounds that are not chemically joined together, but rather are physically mixed together.

Elements are substances that are composed of the same type of atoms and which cannot be split by an ordinary chemical process. For example, sodium, chlorine, oxygen, etc.

Compounds are substances that are comprised of two or more elements chemically combined together. For example, common salt.

Mixtures are substances that are composed of two or more substances physically combined together. For example, salt and water to form a salt solution.

Learn more about compounds and mixtures at: https://brainly.com/question/24647756

#SPJ1