The concentration of the ions in the solution cannot be determined from the information provided. To determine the concentration, additional information, such as the initial concentrations of the reactants and any reaction conditions, would be needed.
What is Silver chromate?Generally, Silver chromate (Ag2CrO4) is a chemical compound made of silver, chromium, and oxygen ions. It is an insoluble substance that forms a red precipitate in aqueous solution.
From the information that has been supplied, it is not possible to estimate the amount of ions that are present in the solution.
Additional information, such as the beginning concentrations of the reactants and any circumstances that may be present throughout the reaction, would be required in order to calculate the concentration.
Read more about concentration
https://brainly.com/question/10725862
#SPJ1
select all the statements that correctly explain why ketones are less reactive than aldehydes
The statements that are correct is : D) Both (a) Ketones are more sterically hindered and (b) Ketones are less electron deficient due to donation from the two alkyl groups.
The statements that are correctly explain the reason that the ketones are less reactive than aldehydes .
(a) Ketones are the more sterically hindered and
(b) Ketones are less electron deficient due to the donation from the two alkyl groups.
The presence of the two alkyl groups on the both sides of the carbonyl (C=O) group will sterically hinders the C atom that will decreases the rate of the reaction of ketones.
This question is incomplete, the complete question is :
select all the statements that correctly explain why ketones are less reactive than aldehydes.
A) Ketones are more sterically hindered.
B) Ketones are less electron deficient due to donation from the two alkyl groups.
C) The statement is false; Ketones are more reactive than aldehydes.
D) Both (a) Ketones are more sterically hindered and (b) Ketones are less electron deficient due to donation from the two alkyl groups.
To learn more about aldehyde here
https://brainly.com/question/30361280
#SPJ4
why mercury is used in shrinkage limit test
Because mercury has a higher specific gravity than dirt, we employ it in the shrinkage limit test. It causes soil to float on top of it and mercury does not fill the holes in the soil. Wax method is another approach for defining shrinkage limits.
The equipment can be used to calculate the volumetric shrinkage limit as well as other shrinkage parameters including the shrinkage ratio, shrinkage index, and shrinkage limit. evaporating dish made of porcelain. The dry volume of the soil pat is calculated using the water displacement method, and wax is used as a coating on the dry soil pat. Porcelain evaporating dish, two glass plates, and a stainless steel shrinking dish make up the equipment used to determine the shrinkage limit. Explanation: Mercury weighs 13.6 g per cubic centimeter.
Learn more about mercury here:
https://brainly.com/question/4025230
#SPJ4
what is the minimum battery size that would be needed to power the refrigerator for two days if there is no sun?
The minimum battery size that would be needed to power the refrigerator for two days if there is no sun will be about 12V 300Ah.
It depends on your location, the season, and if the fridge is new and efficient or old and inefficient. However, a refrigerator typically requires 1000 watt hours per day. With around 500 watts of solar power and a 12V 300Ah (3600Wh) battery, you could easily run it for a few days without the sun. Your battery must be able to handle the load without running out of power. You would need a battery bank of at least 300ah at an average. Below, you can see how this was decided. 24 hours of 66 Watts every hour equals 1584 Watts. 12 volts and 1584 watts equal 132 Ah. So for 48 hours it will be 264 Ah. Therefore for refrigerator to run for couple of days it needs battery size of about 300ah.
To learn more about solar power visit,
https://brainly.com/question/10122139
#SPJ4
Perform the following calculations:
1. What is the new volume of 500 mL of gas when the pressure changes from 750 torr to 980 torr? Assume a constant temperature.
2. A constant T, a 650 mL container of helium at 500 torr expands to 900 mL. What is the new pressure?
1. The new volume of 500 mL of gas is approximately 385 mL.
2. The new pressure is 345.45 torr.
The relationship between pressure, volume, and temperature of a gas is described by Boyle's law, which states that the volume of a gas is inversely proportional to its pressure, provided that the temperature remains constant. To find the new volume, we need to use the equation:
V1 * P1 = V2 * P2
Where V1 is the initial volume, P1 is the initial pressure, V2 is the final volume, and P2 is the final pressure. Substituting the given values, we get:
V2 = V1 * (P1 / P2) = 500 mL * (750 torr / 980 torr)
So, the new volume of 500 mL of gas is approximately 385 mL.
The relationship between pressure, volume, and temperature for a fixed number of gas particles can be described by the ideal gas law: PV = nRT, where P is the pressure, V is the volume, n is the number of particles, R is the gas constant, and T is the temperature (in Kelvin). In this problem, we are given the initial pressure, volume, and temperature, and asked to calculate the final pressure after the volume expands.
2. Since the number of particles (n) and temperature (T) are constant, we can rearrange the equation to find the final pressure after the volume expands:
P1V1 = P2V2
P2 = P1 * (V1/V2)
Plugging in the given values:
P2 = 500 torr * (650 mL / 900 mL) = 345.45 torr
So the new pressure of the helium is 345.45 torr.
For more such questions on gas laws:
https://brainly.com/question/27009857#
#SPJ11
When water or any liquid i poured into a beaker and then more i added, will it DENSITY increae?
Be ure to add an EXPLANATION entence to your repone
When water or any liquid is poured into a beaker and then more is added, density will remain the same for any volume of water.
Density is defined as how much space an object or substance takes up (its volume) in relation to the amount of matter in that object or substance (its mass). The other way to put it is that density is the amount of mass per unit of volume.
The formula for density is given as,
Density = Mass / Volume
S.I. unit of mass is kg and S.I. unit of volume is m³. Hence, S.I. unit of density is given as kg / m³.
The density for any liquid is always fixed for any volume as it is a characteristic property of liquid.
Learn more about density from the link given below.
https://brainly.com/question/29775886
#SPJ4
in the balanced chemical equation 4 al 3 o2 --> 2 al2o3 , how many moles of o2 are needed to completely react with 5 mol al?
To completely react with 5 moles of Al, 15 moles of [tex]O_{2}[/tex] are needed. This is based on the balanced equation [tex]4 Al + 3 O_{2} → 2 Al_{2} O3_{2}[/tex].
When 5 moles of Al react with 3 moles of [tex]O_{2}[/tex], they form 2 moles of [tex]Al_{2} O_{3}[/tex] according to the chemical equation [tex]4 Al + 3 O_{2} → 2 Al_{2} O3_{2}[/tex]. The reaction involves the oxidation of the aluminum atoms, where the aluminum atoms lose electrons to form [tex]Al_{3} +[/tex] ions, and the oxygen atoms gain electrons to form [tex]O_{2}[/tex]- ions.
The [tex]Al_{3}+[/tex] and [tex]O_{2}[/tex]- ions then combine to form [tex]Al_{2} O_{3}[/tex] molecules. This is an example of a redox reaction, where oxidation occurs on one side and reduction occurs on the other side.
Learn more about chemical reactions:
https://brainly.com/question/11231920
#SPJ4
what is the molarity (molar concentration) of a solution made by dissolving 2.355 g of sulfuric acid (h2so4) in water and diluting to a final volume of 50.0
The molarity of the solution made by dissolving 2.355 g of sulfuric acid in water and diluting to a final volume of 50.0 mL is 0.957 M.
Sulfuric acid (H2SO4) has a molecular weight of 98.08 g/mol. To calculate the number of moles of sulfuric acid in the solution, we divide the mass of sulfuric acid (2.355 g) by its molecular weight (98.08 g/mol).
Next, we divide the number of moles of sulfuric acid by the volume of the solution in liters to obtain the molarity of the solution. The final volume of the solution is 50.0 mL, which we need to convert to liters by dividing by 1000.
The molarity (M) of the solution can be calculated using the following equation:
M = (number of moles of solute) / (volume of solution in liters)
Plugging in the values, we get:
M = (2.355 g / 98.08 g/mol) / (50.0 mL / 1000 mL/L) = 0.0478 mol / 0.05 L = 0.957 M
So, the molarity of the solution made by dissolving 2.355 g of sulfuric acid in water and diluting to a final volume of 50.0 mL is 0.957 M.
To learn more about molarity visit here:
https://brainly.com/question/8732513
#SPJ11
how many signals would there be in the decoupled 13c nmr spectrum of this molecule?
There are 4 signals in the decoupled 13c NMR spectrum of a molecule.
A weak oscillating magnetic field (in the near field) perturbs nuclei in a strong constant magnetic field, and as a result, the nuclei respond by producing an electromagnetic signal with a frequency characteristic of the magnetic field at the nucleus. This phenomenon is known as nuclear magnetic resonance (NMR).
Nuclear Magnetic Resonance Spectroscopy is known as NMR Spectroscopy. The study of molecules using radiofrequency (Rf) electromagnetic radiations and molecular nuclei in a high magnetic field is known as nuclear magnetic resonance (NMR) spectroscopy
To learn more about NMR please visit-
https://brainly.com/question/9442853
#SPJ4
How many signals would there be in the decoupled 13c NMR spectrum of a molecule?
A client has developed atrial fibrillation, with a ventricular rate of 150 beats/min. The nurse should assess the client for which associated signs or symptoms? a. Flat neck veins b. Nausea and vomiting c. Hypotension and dizziness d. Hypertension and headache
The nurse should assess the client for hypotension and dizziness. if A client has developed atrial fibrillation, with a ventricular rate of 150 beats/min.
Atrial fibrillation is an irregular and often very rapid heart rhythm (arrhythmia) which can lead to blood clots in the heart. A-fib increases the risk of stroke, heart failure as well as other heart-related complications.
The client with uncontrolled atrial fibrillation with a ventricular rate of more than 100 beats/min is at risk for low CO because of the loss of atrial kick. The nurse assess the client for palpitations, chest pain or discomfort, hypotension, pulse deficit, fatigue, weakness, dizziness, syncope, and distended neck veins.
To know more about hypotension here
https://brainly.com/question/28301027
#SPJ4
how many signals would you expect in the 1h nmr spectrum of (ch3)2chch2ch2ch3?
In the 1H NMR spectrum of (CH3)2CHCH2CH2CH3, we can expect to see six signals arising from the six distinct hydrogen atoms present in the molecule.
This is because the molecular formula C7H16 contains 7 carbon atoms, which will give 7 distinct signals, and 16 hydrogen atoms, which should give 11 signals. The 7 carbon signals will come from the CH3, CH2, and CH groups. The 11 hydrogen signals will come from the four CH3 groups, two CH2 groups, and one CH group, as well as the two terminal hydrogens on the methylene group. Together, these will give a total of 11 signals. The hydrogen atoms on the two methyl groups will give a doublet signal, while the hydrogen atoms on the two CH2CH2 groups will give a quartet signal each. Finally, the hydrogen atoms on the two CHCH2 groups will each give a triplet signal. This means that the spectrum should contain two doublets, two triplets, and two quartets, resulting in a total of six signals.
Learn more about hydrogen atoms here:
https://brainly.com/question/29695801
#SPJ4
Which one of the following isn't true about IR spectroscopy?
A) Some peaks are ambiguous
B) It is useful to detect functional group
C) Small amount of sample is required
D) Elucidating full structure with IR alone may be difficult.
E) IR absorptions are caused by electron excitation.
F) None of the above.
Option E IR absorptions are caused by electron excitation isn't true about IR spectroscopy.
IR absorptions are caused by changes in the vibrational energy of bonds in a molecule, not by electron excitation. This means that IR spectroscopy is based on the measurement of the absorption of infrared light by a sample, not on the excitation of electrons.
IR spectroscopy, or Infrared spectroscopy, is a type of vibrational spectroscopy that measures the vibrations of bonds between atoms in a molecule, it is used to identify and quantify the composition of a sample by analyzing the absorption or transmission of infrared light through the sample.
By analyzing the pattern of IR absorptions, it is possible to identify the functional groups and the chemical composition of a sample, which can provide valuable information about its structure and properties.
To learn more about IR absorptions, visit:
https://brainly.com/question/14389213#
#SPJ11
What properties cause some magmas to be more felsic than others? Different minerals crystallize at different temperatures, changing the chemistry.
The properties that cause some magmas to be more felsic than others are the relative abundances of different elements and minerals that crystallize at different temperatures, changing the chemistry of the magma.
Felsic magmas are characterized by a high abundance of silica (SiO2) and aluminum (Al) and low abundances of iron (Fe) and magnesium (Mg). The high silica content of felsic magmas means that they have a higher viscosity and lower melting temperature compared to mafic magmas, which have a lower silica content.
During the cooling and solidification of magma, minerals with different melting temperatures will crystallize at different times. For example, silicates with a high silica content, such as feldspar and quartz, will crystallize before mafic minerals, such as olivine and pyroxene. This changes the composition of the remaining liquid magma and can cause it to become more felsic.
Therefore, the relative abundances of different elements and minerals in magma and the temperatures at which they crystallize can influence the felsic or mafic nature of the magma.
To learn more about magma visit here:
https://brainly.com/question/16940653
#SPJ11
water is heated to 175 ∘f∘f . what is the temperature of the hot water in degrees celsius?
Answer:
°C÷5= (°F-32)÷9
Explanation:
Just apply the given formula above. Substitute 175 in place of °F then solve the equation
The temperature of 175 °Fahrenheit in degrees Celsius is 79.4 °Celsius.
What is temperature?Temperature is the degree to which a thing is hot or cold. Temperature is a measure of a system's average kinetic energy. As particles in a substance travel faster, their kinetic energy increases, raising the temperature of the system. Heat is defined as the energy exchanged when two bodies of differing temperatures come into contact. Temperature is a quantity that indicates a body's thermal condition (i.e., the degree of hotness or coldness of the body). When two bodies of differing temperatures come into touch, it defines the direction of heat transfer.
Here,
The temperature of hot water in degrees Celsius can be calculated by using the formula:
C = (F - 32) * (5/9)
where C is the temperature in degrees Celsius and F is the temperature in degrees Fahrenheit.
Plugging in the given temperature of 175 ∘F, we get:
C = (175 - 32) * (5/9)
C = 143 * (5/9)
C = 79.44∘C
So, the temperature of the hot water in degrees Celsius is approximately 79.44 ∘C.
To know more about temperature,
https://brainly.com/question/5421090
#SPJ4
What is the pH of a solution that has [H3O+] = 1.39x 10-2 M? A)1.56 X 10*12 B) 2.40 0 C) 1.86 D) 5.12 E) none of the above
The pH of the solution that has [H₃O⁺] of 1.39 × 10⁻² M is the correct option is C) 1.86.
The concentration of [H₃O⁺] = 1.39 × 10⁻² M
The expression for the pH is as follows :
pH = - log [H₃O⁺]
Where,
[H₃O⁺] = 1.39 × 10⁻² M
pH = - log ( 1.39 × 10⁻² M )
pH = - log (1.39) - log ( 10⁻²)
pH = - 0.14 + 2
pH = 1.86
The pH below value of 7 is for the acidic solution.
Thus, the pH of the solution is 1.86 with concentration of [H₃O⁺] is 1.39 × 10⁻² M.
To learn more about pH here
https://brainly.com/question/30461233
#SPJ4
Explain your prediction for the effect Na+Cl− might have on glucose transport. In other words, explain why you picked the choice that you did. How well did the results compare with your prediction?
The prediction for the effect Na⁺ Cl⁻ might have on the glucose transport is that the increasing the NaCI lead to increase in the osmotic pressure.
The effect Na⁺ Cl⁻ might have on the glucose transport is that the increasing the NaCI lead to increase in the osmotic pressure. This is because of the water will need to diffuse to the higher concentration gradient until the equilibrium is reached. The glucose is the transported across the membrane through the GLUT transporters.
Thus, the NaCl will increases as the osmotic pressure increases as the effect Na⁺ Cl⁻ might have in the glucose transport.
To learn more about NaCl here
https://brainly.com/question/15572248
#SPJ4
ch2 is an example of an empirical formula. which answer options are potential molecular formulas for ch2? select all that apply.
Option 1,2,6 are Correct. Evaluative formula Of all the elements in a compound, CH2 has the smallest whole number ratio.
The following molecular formulas could possibly represent CH2 among the possibilities:
1. C2H4
2. C4H8
3. Glucose has a chemical formula of C6H14 C6H12O6, which cannot be modelled by CH2. C5H10 and C3H8 operate similarly.
The most straightforward elemental ratio of a chemical compound is known as an empirical formula. By bringing each element's ratio in the combination down to its smallest whole-number ratio, the empirical formula is discovered. For instance, if a substance has 2 carbon atoms, 6 hydrogen atoms, and 12 oxygen atoms, its empirical formula would be CH2O since 2:6:12 may be converted to 1:3:6.
Learn more about empirical formula Visit: brainly.com/question/1603500
#SPJ4
Correct Question:
CH2 is an example of an empirical formula. Which answer options are potential molecular formulas for CH2? Select all that apply.
Group of answer choices
1. C6H12O6
2. C5H10
3. C4H8
4. C2H4
5. C6H14
6. C3H8
what is the molecular shape of the osbcl− 2 molecule? sb is the central atom. select all that apply
The molecular shape of the "OsbCl2" molecule can be determined by using the VSEPR (Valence Shell Electron Pair Repulsion) theory. This theory predicts the molecular shape based on the repulsion between the electron pairs surrounding the central atom (in this case, the "sb" atom).
Based on the VSEPR theory, the molecular shape of OsbCl2 is:Square Planar In a square planar molecular geometry, the central atom is surrounded by four electron pairs (or regions of high electron density) arranged in a square shape. These electron pairs are in a plane, and the bond angles are approximately 90°.The molecular shape of OsbCl2 is Square Planar, which means the central atom (sb) is surrounded by four electron pairs arranged in a square shape and the bond angles are approximately 90°
Learn more about molecular shape here:
https://brainly.com/question/12449743
#SPJ4
which of the following best describe lineation? multiple select question. it may be due to elongated mineral crystals that grow in linear orientation. it is the same thing as cleavage. it is the same as gneissic foliation. it can form under ductile shearing. stretched-out mineral crystals may show lineation.
Lineation is best described as an orientation of elongated mineral crystals that grow in a linear orientation.
It is the same as cleavage and gneissic foliation, and can form under ductile shearing. Stretched-out mineral crystals may also show lineation.
Lineation occurs when mineral crystals are stretched out in a linear orientation due to forces such as tectonic plate movement and regional metamorphism. This stretching can cause foliation, which is the alignment of mineral grains. Lineation is usually seen in metamorphic rocks such as schist, gneiss and slate, but can also be observed in igneous rocks.
Learn more about mineral crystals:
https://brainly.com/question/7998134
#SPJ4
1. A calorimeter holds 105 g water at 21.0°C. A sample of hot iron is added to the water, and
the final temperature of the water and iron is 28.0°C. What is the change in enthalpy 2 Cheat
associated with the change in the water's temperature? The specific heat of water is 4.18
J/(g. °C).
Elthalpy change is the heat absorbed by water for the iron placed in water is 3072.3 Joules.
What is Enthalpy ?A thermodynamic system's enthalpy, which is one of its properties, is calculated by adding the system's internal energy to the product of its pressure and volume. It is a state function that is frequently employed in measurements of chemical, biological, and physical systems under constant pressure, which the large surrounding environment readily provides.
The amount of heat released or absorbed during a reaction that takes place under constant pressure is referred to as the enthalpy change. It has the sign H, which may be interpreted as "delta H."
The initial tempareture of the water is 21°C
Final temperature of the water is 28°C
Change in temperature is 28 - 21 = 7°C
Elthalpy change is the heat absorbed by water for the iron placed in water is 4.18*105*7 = 3072.3 Joules.
To learn more about Enthalpy refer to :
https://brainly.com/question/27565372
#SPJ1
How is a Peninsula Formed and Examples of 10 Largest Peninsulas in the World
A peninsula can be created by the water level rising or lowering, which may expose or hide areas of the land. A peninsula may also be formed through the rise or descent of a geographical mass.
What are the examples of the 10 largest peninsula in the world?Arabian, Deccan, Indo-China, Horn of Africa, Alaskan Peninsula, Labrador Peninsula, Scandinavia, The Balkans, The Iberian Peninsula, and The Kamchatka Peninsula are the 10 largest peninsulas.
What causes a peninsula to form?When the sea level pushes up on the land and slowly recedes over many years, erosion occurs, resulting in the formation of a peninsula. In addition, land masses are frequently only partially surrounded by water as a result of melting glaciers and an increase in tropical storms, which raises sea levels.
What does peninsula mean?A peninsula is a piece of land that is bordered by water on three sides. The phrase "nearly an island" is derived from the Latin paene insula. Florida is the most obvious peninsula in the US. Although Alaska is quite big and has many of its own peninsulas, it also satisfies the description.
To know more about peninsulas visit:
https://brainly.com/question/12182429
#SPJ4
the output of glycolysis is pyruvate, but the citric acid cycle uses acetyl coa. briefly explain how glycolysis and the citric acid cycle are linked.
The output of glycolysis is pyruvate, but the citric acid cycle uses acetyl CoA. Briefly glycolysis and the citric acid cycle are linked to the results of glycolysis, namely pyruvic acid is converted to acetyl Co-A for the raw material of the citric acid cycle.
Cellular respiration is a complex organic breakdown process at the cellular level that aims to produce ATP that occurs in the mitochondrial matrix. ATP is the energy used by cells to meet their needs in order to carry out various activities. The first stage of cellular respiration is glycolysis. Glycolysis is an energy-releasing reaction that breaks one molecule of glucose into two molecules of pyruvic acid, a NADH and 2 ATP.
The citric acid cycle is a cycle that occurs after glycolysis. In glycolysis, pyruvic acid is produced which is then converted to acetyl Co-A during oxidative decarboxylation. then acetyl co-A is used as raw material for the citric acid cycle to produce 2 ATP, 6 NADH, 2 FADH2, and 4 CO2.
Learn more about glycolysis at:
https://brainly.com/question/26990754
#SPJ4
Which groups form an ionic bond?
Between only metals ,nonmetals may ionic bonding develop. This is due to the fact that nonmetals "desire" to obtain electrons whereas metals "want" to give up electrons. An atom's valence electrons must be removed .
How are ions bound together?The full transfer of certain electrons through one atom to some other results in the formation of an ionic connection. A negatively charged ion known as a cation results from an atom shedding one or more electrons. An anion, or negatively charged ion, is created when an atom gains one or more electrons.
What sort of ionic connection is that?The creation of sodium fluoride, or NaF, from such an oxidation state and a fluorine atom is an illustration of an ionic association. The fluorite atom, that only has enough room to take it, picks up the solitary valence electron that the sodium atom lost during this reaction.
To know more about Ionic bonds visit:
https://brainly.com/question/11527546
#SPJ4
More free energy! The isomerization of dihydroxyacetone phosphate (DHAP) to glyceroldehyde 3-phosphate (GAP) has an equilibrium constant of 0.0475 under standard conditions (298 K, pH 7).
a)Calculate ΔGº′ for the isomerization.
b)Calculate ΔG for this reaction when the initial concentration of DHAP is 2 × 10−4 M and the initial concentration of GAP is 3 × 10−6 M. What do these values tell you about the importance of ΔG compared with that of ΔGº′ in understanding the thermodynamics of intracellular reactions?
The isomerization of dihydroxyacetone phosphate (DHAP) to glyceraldehyde 3-phosphate (GAP) has an equilibrium constant ΔGº is -3879.6 J/mol
Step 1: Information is provided
ΔG°′=7.53 kJ/mol is the typical change in Gibbs free energy.
298 K is the temperature.
The isomerization of dihydroxyacetone phosphate (DHAP) to glyceraldehyde 3-phosphate (GAP) has an equilibrium
[glyceraldehyde-3-phosphate]=0.00100 M [dihydroxyacetone phosphate]=0.100 M.
Step 2: Figure out ΔG for this reaction.
ΔG is equal to ΔG° + RT ln ([glyceraldehyde-3-phosphate]/[dihydroxyacetone phosphate]) with ΔG° = 7.53 kJ/mol = 7, R = 8.314 J/mol*K, T = 298 K, [glyceraldehyde-3-phosphate]=0.00100 M, and [dihydroxyacetone phosphate]=0.100 M.
ΔG is equal to 7530 J/mol plus 8.314 x 298 x ln(0.001/0.1).
ΔG = -3.88 kJ/mol = -3879.6 J/mol
equilibrium constant ΔGº is -3879.6 J/mol
This is importance of ΔG compared with that of ΔGº
Learn more about isomerization here
https://brainly.com/question/15898101
#SPJ4
N2(g) + 3H2(g) → 2NH3(g)
How many moles of N2 will react with 1.5 moles of H2?
a.1.5 mol
b. 1.0 mol
c. 0.5 mol
d. 2.0 mol
0.5 moles of N₂ will react with 1.5 moles of H₂.
N₂(g) + 3H₂ (g) -> 2NH₃(g)
From the above balanced equation
Three (3) moles of H₂ will reacts with 1 mole of N₂
1 moles of H₂(Hydrogen) will reacts with 1 / 3 moles of N₂(Nitrogen)
1.5 moles of H₂ requires 1 / 3 x 1.5 = 1 / 2 mole = 0.5 moles
Nitrogen is the chemical element having symbol N and its atomic number will be 7. Nitrogen is a nonmetal and the lightest member of the group 15 in the periodic table, often known as the pnictogens.
Hydrogen is the chemical element having symbol H and its atomic number will be 1. Hydrogen is the lightest element. At standard conditions hydrogen is a gas of the diatomic molecules having formula H₂. It is a colorless, tasteless, odorless, non-toxic, and highly combustible.
To know more about moles here
https://brainly.com/question/26416088
#SPJ4
a 0.20 m sodium chlorobenzoate (nac7h4clo2) solution has a ph of 8.65. calculate the ph of a 0.20 m chlorobenzoic acid (hc7h4clo2) solution.
A 0.20 m sodium chlorobenzoate ([tex]NaC7H4ClO2[/tex]) solution has a pH of 8.65 the pH of a 0.20 m chloro-benzoic acid ([tex]HC7H4ClO2[/tex]) solution is 2.35
Given the concentration of sodium chlorobenzoate (M) = 0.2M
The pH of sodium chlorobenzoate ([tex]NaC7H4ClO2[/tex]) solution = 8.65
The pOH of the solution = 5.35
The concentration of chloro-benzoic acid ([tex]HC7H4ClO2[/tex]) solution = 0.2
The pH of chloro-benzoic acid ([tex]HC7H4ClO2[/tex]) solution = P
From the pH the ([tex]NaC7H4ClO2[/tex]) is a weak base, so determine the Ka for C7H4ClO2. Then, [OH-]= 10^-5.35 = 4.5 * 10^-4M = x
Kb = (x)^2/(0.2 - x) = (4.5 * 10^-4)^2/(0.2- 4.5 * 10^-4) = 1 * 10^-10
The chloro-benzoic acid is a weak acid such that ka = kw/kb = 10^-14/10^-10 = 10^-4
Then, (x)^2/(0.2 - x) = 10^-4
x = [H+] = 4.5 * 10^-2M
pH = 2.35
To learn more about pH click here https://brainly.com/question/491373
#SPJ4
the atomic masses of 79br and 81br are 78.918336 and 80.916290 amu, respectively. the average atomic mass of bromine is 79.904 amu. calculate the natural abundances of these two isotopes.
The natural abundance of 79Br is 98.89% and the natural abundance of 81Br is 101.11%.
Atomic masses are the weights of individual atoms in atomic mass units (amu). Bromine is a chemical element with two stable isotopes: 79Br and 81Br.
The average atomic mass of bromine is calculated as the weighted average of the atomic masses of its isotopes, taking into account their natural abundances.
The natural abundance of an isotope can be calculated using the formula:
Abundance = (Atomic mass of isotope / Average atomic mass) * 100%
For 79Br:
Abundance = (78.918336 amu / 79.904 amu) * 100% = 98.89%
For 81Br:
Abundance = (80.916290 amu / 79.904 amu) * 100% = 101.11%
So, the natural abundance of 79Br is 98.89% and the natural abundance of 81Br is 101.11%.
To learn more about atomic masses:
https://brainly.com/question/30390726
#SPJ4
give the structure of the organic product expected when ch2i2 reacts with each of the alkenes in the presence of a zn–cu couple:
When ethyl magnesium bromide is treated with heavy water, the anticipated structure of the organic product is:
We are aware that heavy water is D 2 O because deuterium is a heavy form of hydrogen. An RMgX Grignard reagent is ethyl magnesium bromide. When the Grignard reagent is handled with water, or hydrolyzed, it produces matching alkanes and RMg(OH)X, where the hydrogen in the alkanes and the OH in the RMg(OH)X are derived from water, or H 2 O. The heavy hydrogen, D, is replaced by H in alkane when H 2 is replaced by D 2 O, and H is also replaced by D in RMg(OH)X.
Learn more about alkanes here-
https://brainly.com/question/3648919
#SPJ4
To a small 50 ml sample of buffer, 100 ml of concentrated strong base solution are added. You should expect the pH of this solution to: a. Decrease b. Stay the same c. Increase d. Be fully neutralized
The pH of this solution will Increase.An aqueous solution's acidity or basicity is shown on a scale called pH, which stands for "potential of hydrogen" (or "power of hydrogen").
Lower pH values are recorded for acidic solutions than for basic or alkaline solutions (solutions with larger quantities of H+ ions).When modest quantities of acid and alkali are added to a buffer solution, the pH remains constant. The buffer can only withstand so much acid or so much alkali. The buffer capacity is determined by: If you have a weak acid with a dissociation constant of Ka: CA stands for acid concentration.
learn more about pH refer:brainly.com/question/2288405
#SPJ4
[SEE PICTURE] What amount of solute is dissolved in 100mL of water?
Answer:
between 0.1 and 1.0
Explanation:
this is because a solute is usually only slightly soluble in water
I literally just learned this so I am pretty sure
a strong oxidizing agent increasingly being used as a disinfectant and sterilant for treating drinking water, wastewater, and swimming pools is
A strong oxidizing agent increasingly being used as a disinfectant and sterilant for treating drinking water, wastewater, and swimming pools is chlorine dioxide.
What is oxidizing agent?An oxidizing agent is a substance that obtains or "accepts"/"receives" an electron from a reducing agent in a redox chemical process. An oxidizer, in other terms, is any substance that oxidizes another material. An oxidizing agent (also known as an oxidizer or an oxidant) is a chemical species that tends to oxidize other substances, causing them to lose electrons and hence raise their oxidation state. Oxidating agents are often known as oxidants or oxidisers. Hydrogen peroxide, ozone, oxygen, potassium nitrate, and nitric acid are all oxidizing chemicals. Each and every halogen is an oxidizing agent (e.g., chlorine, bromine, fluorine).
Here,
Chlorine dioxide is a powerful oxidizing agent that is increasingly being utilized as a disinfectant and sterilant in the treatment of drinking water, wastewater, and swimming pools.
To know more about oxidizing agent,
https://brainly.com/question/10547418
#SPJ1
