The water absorbed 12.775 kcal of heat as it was heated from 15°C to 88°C.
The amount of heat absorbed by the water can be calculated using the formula:
q = m * c * ΔT
where q is the heat absorbed (in calories), m is the mass of the water (in grams), c is the specific heat of water (1.00 cal/g°C), and ΔT is the change in temperature (in °C).
Substituting the given values, we get:
q = 175 g * 1.00 cal/g°C * (88°C - 15°C)
q = 175 g * 1.00 cal/g°C * 73°C
q = 12,775 cal
To convert calories to kilocalories, we divide by 1000:
q = 12,775 cal / 1000 = 12.775 kcal
To know more about specific heat click on below link:
https://brainly.com/question/11297584#
#SPJ11
calculate δh∘ for the following reaction: ch3oh(l)+o2(g) → hco2h(l)+h2o(l)
The standard enthalpy change (ΔH∘) for the reaction:
CH3OH(l) + O2(g) → HCO2H(l) + H2O(l)
can be calculated using standard enthalpies of formation (ΔHf∘) of reactants and products. The equation for the calculation of ΔH∘ is:
The standard enthalpy change (ΔH∘) for the given reaction is -738.8 kJ/mol.
ΔH∘ = ΣΔHf∘ (products) - ΣΔHf∘ (reactants.where Σ means the sum of, and ΔHf∘ is the standard enthalpy of formation.The standard enthalpies of formation for the given compounds are:
ΔHf∘(CH3OH) = -238.6 kJ/mol
ΔHf∘(O2) = 0 kJ/mol
ΔHf∘(HCO2H) = -691.0 kJ/mol
ΔHf∘(H2O) = -285.8 kJ/mol
Using the equation above, we can calculate ΔH∘ for the reaction:
ΔH∘ = [ΔHf∘(HCO2H) + ΔHf∘(H2O)] - [ΔHf∘(CH3OH) + ΔHf∘(O2)]
ΔH∘ = [(-691.0 kJ/mol) + (-285.8 kJ/mol)] - [(-238.6 kJ/mol) + (0 kJ/mol)]
ΔH∘ = -977.4 kJ/mol + 238.6 kJ/mol
ΔH∘ = -738.8 kJ/mol.
Therefore, the standard enthalpy change (ΔH∘) for the given reaction is -738.8 kJ/mol.
To learn more about δh∘:
https://brainly.com/question/567211
#SPJ11
pyridine (c5h5n) is a base with a kb of 1.7 x 10–9. what is the ph of 0.10 m pyridine?
pyridine (c5h5n) is a base with a kb of 1.7 x 10–9.the pH of 0.10 M pyridine is 10.41.
What is a base?A base is a substance that can accept a proton (H⁺ ion) from an acid, or donate a pair of electrons to form a chemical bond. Bases are characterized by their pH, with values above 7 indicating basicity.
What is PH?pH is a measure of the acidity or basicity of a solution. It is defined as the negative logarithm (base 10) of the concentration of hydrogen ions (H⁺) in the solution. A pH of 7 is neutral, values below 7 are acidic, and values above 7 are basic.
According to the given information:
To solve this problem, we need to use the equation for the base dissociation constant (Kb) and the definition of pH.
Kb = [BH+][OH-]/[B]
We know that pyridine is a base, so it will accept a proton (H+) from water to form the conjugate acid (BH+). Therefore, we can set up the following equation:
C5H5N + H2O ⇌ C5H5NH+ + OH-
We are given that Kb = 1.7 x 10^-9 for pyridine. We can use this value to find the concentration of hydroxide ions (OH-) in the solution:
Kb = [BH+][OH-]/[B]
1.7 x 10^-9 = x^2/0.10
x = 4.12 x 10^-5 M
Now we can use the concentration of hydroxide ions to find the pH:
pH = -log[H+]
pH = 14 - pOH
pH = 14 - log[OH-]
pH = 14 - log(4.12 x 10^-5)
pH = 10.41
Therefore, the pH of 0.10 M pyridine is 10.41.
To know more about base, PH visit:
https://brainly.com/question/29434898
#SPJ11
like all equilibrium constants, the value of depends on temperature. at body temperature , . what are the and ph of pure water at body temperature?
Pure water has a pH of 6.81 at body temperature, which is somewhat acidic due to the presence of minor quantities of H₃O⁺ ions.
How to determine pH?The autoionization of water is described by the following equilibrium equation:
2H₂O (l) ⇌ H₃O⁺ (aq) + OH⁻ (aq)
The equilibrium constant expression for this reaction is:
Kw = [H₃O⁺][OH⁻]
At body temperature of 37°C or 310 K, the value of Kw is 2.4 x 10⁻¹⁴.
Since the concentrations of H₃O⁺ and OH⁻ ions are equal in pure water, use the equilibrium constant expression and the value of Kw to determine their concentration as follows:
Kw = [H₃O⁺][OH⁻] = (x)(x)
where x represents the concentration of both H₃O⁺ and OH⁻ ions in pure water.
Substituting the value of Kw and solving for x:
2.4 x 10⁻¹⁴ = x²
x = √(2.4 x 10⁻¹⁴) = 1.55 x 10⁻⁷ M
Therefore, the concentration of both H₃O⁺ and OH⁻ ions in pure water at body temperature is 1.55 x 10⁻⁷ M.
The pH of pure water can be calculated using the expression:
pH = -log[H₃O⁺]
Substituting the concentration of H₃O⁺ in pure water:
pH = -log(1.55 x 10⁻⁷) ≈ 6.81
Therefore, the pH of pure water at body temperature is approximately 6.81, which is slightly acidic due to the presence of small amounts of H₃O⁺ ions.
Find out more on equilibrium constant here: https://brainly.com/question/19340344
#SPJ1
Complete question:
Like all equilibrium constants, the value of Kw depends on temperature. At body temperature (37 °C), Kw = 2.4 * 10-14. What are the [H3O+] and pH of pure water at body temperature?
Find molarity of 935 mL of solution made with 17.5 g NaHCO3?
The molarity of the solution made with 17.5 g NaHCO3 in 935 mL of solution is 0.222 M.
To find the molarity of a solution made with 17.5 g of NaHCO3 in 935 mL of solution, we first need to calculate the number of moles of NaHCO3 present in the solution.
The molar mass of NaHCO3 is 84.01 g/mol. Therefore, the number of moles of NaHCO3 in 17.5 g of NaHCO3 can be calculated as follows:
Number of moles of NaHCO3 = mass of NaHCO3 / molar mass of NaHCO3
= 17.5 g / 84.01 g/mol
= 0.2083 mol
Next, we need to calculate the volume of the solution in liters:
Volume of solution = 935 mL / 1000 mL/L
= 0.935 L
Finally, we can calculate the molarity of the solution using the following formula:
Molarity = Number of moles of solute / Volume of solution in liters
= 0.2083 mol / 0.935 L
= 0.222 M
Know more about molarity here:
https://brainly.com/question/8732513
#SPJ11
What do you have to do to the coefficients of equation l below to get equation ll
The correct way to write a balanced equation is Equation II.
The two equations represent the same chemical reaction, but Equation I has coefficients that are twice as large as the coefficients in Equation II. To balance an equation, you need to ensure that the same number of atoms of each element is present on both the reactant and product sides. In Equation I, there are 4 oxygen atoms on the left side, but only 2 oxygen atoms on the right side. To balance this, you need to add a coefficient of 2 in front of the H2O on the right side.
However, this also changes the number of hydrogen atoms on the right side, so you need to add a coefficient of 2 in front of the H2 on the left side to balance the hydrogen atoms. Finally, the coefficients of all species in the balanced equation should be in their lowest possible whole number ratio. Therefore, you need to divide all coefficients in Equation I by 2 to get Equation II, which is the correctly balanced equation.
The complete question is
What do you have to do to the coefficients of equation I below to get to equation II?
Which equation is the correct way to write a balanced equation? Why?
i. 2 SnO₂+ 4 H₂ → 2 Sn + 4 H₂O
ii. SnO₂+ 2 H₂ → Sn + 2 H₂O
To know more about the Coefficients, here
https://brainly.com/question/14157677
#SPJ1
Note the first distillation is an example of steam distillation. what is meant by the term steam distillation?
Steam distillation is a method of separating volatile compounds from non-volatile substances using steam. This technique is used when the substances being distilled have high boiling points and are not easily vaporized at low temperatures. By using steam, the boiling points of the substances being distilled are lowered, allowing them to vaporize and be collected separately.
The process of steam distillation involves passing steam through a mixture of the substances being distilled. The steam carries the volatile compounds with it, and the mixture is then condensed to separate the volatile compounds from the non-volatile substances. The volatile compounds can then be collected as a separate product.
One of the advantages of steam distillation is that it is a gentle method that preserves the natural properties of the substances being distilled. It is commonly used in the extraction of essential oils from plants, as well as in the production of alcoholic beverages and other compounds.
Overall, steam distillation is a useful technique that allows for the separation of volatile compounds from non-volatile substances. It is a gentle and effective method that is widely used in many industries.
Here you can learn more about Steam distillation
https://brainly.com/question/29400171#
#SPJ11
Will the following reactions provide the indicated product in high yield? O H + CH3 H3C NaOH, ethanol Heat ---> O CH3
Yes, the reaction will provide the indicated product in high yield.This is a classic Williamson ether synthesis reaction, in which the hydroxide ion deprotonates the alcohol, creating an alkoxide ion that is then attacked by the methyl halide to form the ether product.
The reaction is usually performed under reflux conditions to ensure complete reaction and high yield of product. The only potential issue with this reaction is if there is any competing elimination reaction that could occur under the basic conditions, but since the reactants are well-suited to the ether synthesis mechanism and there are no obvious leaving groups on the reactants, we can assume that the reaction will proceed as expected with good yield.
learn more about reflux conditions
https://brainly.com/question/4080620
#SPJ11
a pure sodium crystal 100g sits ina steel cup. one drop (1ml) water is added. hydogen gas is produced. what else happens? explain as quantiviliy as possible why it is dangerous to add water to pure materials like sodium
When water is added to pure sodium, hydrogen gas is produced and the reaction can become quite violent, causing an explosion.
Sodium is a highly reactive metal that easily reacts with water to produce hydrogen gas and sodium hydroxide. The reaction is highly exothermic, which means that it releases a lot of heat, and can cause the hydrogen gas to ignite and explode.
This means that for every two moles of sodium and two moles of water, two moles of sodium hydroxide and one mole of hydrogen gas are produced.
In the case of the 100g pure sodium crystal, adding just one milliliter of water can still cause a dangerous reaction due to the large surface area of the crystal and the fact that the reaction is highly exothermic.
Therefore, it is extremely dangerous to add water to pure materials like sodium, as it can cause explosions and other hazardous reactions. It is important to handle pure materials like sodium with extreme care and under controlled conditions to avoid accidents.
Learn more about sodium
https://brainly.com/question/25597694
#SPJ11
Draw the principal organic product for the reaction of 1−bromopropane with magnesium in diethyl ether followed with benzaldehyde in diethyl ether, then followed by dilute acid. Click the "draw structure" button to launch the drawing utility.
1-bromopropane + Mg (in diethyl ether) → 1-bromopropan-2-ol (Grignard reagent)
Grignard reagent + benzaldehyde (in diethyl ether) → 1-phenylpropan-1-ol (after protonation with dilute acid)
What is Organic Product?
In organic chemistry, a product is the substance(s) formed from a chemical reaction. An organic product is a substance that is formed from a reaction that involves at least one organic compound. Organic compounds are those that contain carbon atoms bonded to hydrogen and other elements such as oxygen, nitrogen, sulfur, and halogens.
The reaction of 1-bromopropane with magnesium in diethyl ether is a Grignard reaction that forms the corresponding magnesium alkoxide as the intermediate. The addition of benzaldehyde in diethyl ether to the Grignard reagent results in a nucleophilic attack by the alkoxide on the carbonyl carbon of benzaldehyde, followed by protonation of the resulting intermediate by dilute acid. The final product is 1-phenylpropan-1-ol.
Learn more about Organic Product from the given link
https://brainly.com/question/29666831
#SPJ4
The principal organic product is 1-phenylpropan-2-ol.
What is the main organic product formed?When 1-bromopropane reacts with magnesium in diethyl ether, a Grignard reagent, namely 1-magnesiobutane, is formed. This intermediate then undergoes nucleophilic attack by benzaldehyde in diethyl ether, leading to the formation of 1-phenylpropan-2-ol. The final step involves the addition of dilute acid, which serves to protonate the oxygen of the alcohol, resulting in the formation of the principal organic product, 1-phenylpropan-2-ol.
Learn more about Diethyl ether
brainly.com/question/14662255
#SPJ11
what volume (in liters) of hydrogen gas, at a temperature of 355 k and a pressure of 738 mmhg, is required to synthesize 35.7 g of methanol?
That 31.75 liters of hydrogen gas are required to synthesize 35.7 g of methanol.
To find the volume of hydrogen gas needed, we'll use the Ideal Gas Law equation, PV = nRT.
First, convert the mass of methanol to moles using its molar mass (32.04 g/mol).
Next, determine the stoichiometry between methanol and hydrogen gas, which is 1:2.
Then, convert the pressure from mmHg to atm and use the Ideal Gas Law to calculate the volume of hydrogen gas.
Hence, We calculated that 31.75 liters of hydrogen gas at 355 K and 738 mmHg are required to synthesize 35.7 g of methanol.
learn more about equation click here:
https://brainly.com/question/2972832
#SPJ11
a chemical that is effective in preserving foods with a low ph such as bread is ________.
Answer:
sodium propionate
Explanation:
A chemical that is effective in preserving foods with a low pH such as bread is propionic acid.
Propionic acid is a naturally occurring carboxylic acid that is commonly used as a preservative in the food industry. It is effective in inhibiting the growth of mold and bacteria in foods with a low pH, such as bread and other baked goods. Propionic acid is also used as a flavoring agent in some types of cheese and as a feed additive for livestock. It is generally recognized as safe (GRAS) by the United States Food and Drug Administration (FDA) and is widely used in the food industry to help extend the shelf life of various products.
To learn more about Propionic acid:
https://brainly.com/question/13059194
#SPJ11
The equilibrium constant is given for one of the reactions below. Determine the value of the missing equilibrium constant. Deuterium, D, is an isotope of hydrogen.
2 HD(g) ⇌ H2(g) + D2(g) Kc = 0.28
6 H2(g) + 6 D2(g) ⇌ 12 HD(g) Kc = ?
The equilibrium constant for the reverse reaction is equal to 0.28⁶ = 0.0028.
What is equilibrium constant?Equilibrium constant is a mathematical expression that represents the relative concentrations of reactants and products in a chemical reaction at equilibrium. It is the ratio of the product of the activities of the products divided by the product of the activities of the reactants. It is also known as the reaction quotient. The equilibrium constant is independent of the amount of reactants and products present in a system and is only determined by the temperature and pressure of the system.
The missing equilibrium constant is Kc = 0.0028. This is because the reverse reaction (the reaction given in the question) is the same as the forward reaction, but with a stoichiometric factor of 6. Therefore, the equilibrium constant for the reverse reaction is equal to 0.28⁶ = 0.0028.
To learn more about equilibrium constant
https://brainly.com/question/3159758
#SPJ4
To simulate blood conditions, a phosphate buffer system with a pH = 7.4 is desired. What mass of Na2HPO4 must be added to 1.25 L of 0.38 M NaH2PO4(aq) to prepare such a buffer? Answer in units of g.
68.99 g of Na2HPO4 must be added to 1.25 L of 0.38 M NaH2PO4(aq) to prepare a phosphate buffer system
The Henderson-Hasselbalch equation can be used to calculate the required mass of Na2HPO4.
pH = pKa + log([Na2HPO4]/[NaH2PO4])
So, [Na2HPO4] = 1.74 x [NaH2PO4]
0.38 M NaH2PO4(aq) = 0.38 mol/L x 1.25 L = 0.475 mol NaH2PO4
[Na2HPO4] = 1.74 x 0.38 M = 0.6612 M Na2HPO4
Mass of Na2HPO4 required = (0.6612 mol/L x 1.25 L x 141.96 g/mol) - (0.475 mol/L x 1.25 L x 141.96 g/mol)
= 68.99 g
Therefore, 68.99 g of Na2HPO4 must be added to 1.25 L of 0.38 M NaH2PO4(aq) to prepare a phosphate buffer system with a pH of 7.4.
To know more about buffer click on below link :
https://brainly.com/question/21124646#
#SPJ11
68.99 g of Na2HPO4 must be added to 1.25 L of 0.38 M NaH2PO4(aq) to prepare a phosphate buffer system
The Henderson-Hasselbalch equation can be used.
pH = pKa + log([Na2HPO4]/[NaH2PO4])
So, [Na2HPO4] = 1.74 x [NaH2PO4]
0.38 M NaH2PO4(aq) = 0.38 mol/L x 1.25 L = 0.475 mol NaH2PO4
[Na2HPO4] = 1.74 x 0.38 M = 0.6612 M Na2HPO4
Mass of Na2HPO4 required = (0.6612 mol/L x 1.25 L x 141.96 g/mol) - (0.475 mol/L x 1.25 L x 141.96 g/mol)
= 68.99 g
Therefore, 68.99 g of Na2HPO4 must be added to 1.25 L of 0.38 M NaH2PO4(aq) to prepare a phosphate buffer system with a pH of 7.4.
To know more about Henderson-Hasselbalch refer here:
https://brainly.com/question/13423434
#SPJ11
the ions that are indicated by the question mark and reabsorbed in the proximal tubule are_____.
The ions that are indicated by the question mark and reabsorbed in the proximal tubule are sodium ions (Na+), potassium ions (K+), and bicarbonate ions (HCO3-). These ions play important roles in maintaining the body's fluid balance and acid-base balance.
The ions that are indicated by the question mark and reabsorbed in the proximal tubule could be any number of different ions, as there are many different types of ions that are reabsorbed in this part of the kidney. Some of the most important ions that are typically reabsorbed in the proximal tubule include sodium, potassium, calcium, magnesium, and chloride ions.
These ions are important for maintaining proper fluid and electrolyte balance in the body, and the proximal tubule plays a key role in regulating their levels by selectively reabsorbing them from the filtrate and returning them to the bloodstream.
To know more about ions click here:
https://brainly.com/question/30663970
#SPJ11
Calculate the molarity of 31.85 grams of NaCl in 3.0 liters of solution.
The molarity of 31.85 grams of NaCl in 3.0 liters of solution is 0.18M.
How to calculate molarity?Molarity is the concentration of a substance in solution, expressed as the number of moles of solute per litre of solution.
Molarity of a solution can be calculated by dividing the number of moles of the substance by its volume as follows;
Molarity = no of moles ÷ volume
According to this question, 31.85 grams of NaCl is equivalent to 0.54 moles. The molarity of the solution can be calculated as follows;
molarity = 0.54 moles ÷ 3.0L = 0.18M
Learn more about molarity at: https://brainly.com/question/8732513
#SPJ1
Complete and balance each of the following double-replacement reactions. Express your answer as a chemical equation. Identify all of the phases in your answer. Enter noreaction if there is no reaction.
Part A
AgC2H3O2(aq)+BaCl2(aq)→
Part B
CaBr2(aq)+K2CO3(aq)→
The complete and balanced reaction AgC2H3O2(aq) + BaCl2(aq) → AgCl(s) + Ba(C2H3O2)2(aq) and CaBr2(aq) + K2CO3(aq) → CaCO3(s) + 2KBr(aq)
Part A:
AgC2H3O2(aq) + BaCl2(aq) → AgCl(s) + Ba(C2H3O2)2(aq)
Note: AgCl is insoluble and precipitates out of the solution as a solid.
Part B:
CaBr2(aq) + K2CO3(aq) → CaCO3(s) + 2KBr(aq)
Note: CaCO3 is insoluble and precipitates out of the solution as a solid.
A double-replacement reaction is a type of chemical reaction in which two ionic compounds in aqueous solution exchange ions to form two new compounds. The general form of a double-replacement reaction is:
AB + CD → AD + CB
where A, B, C, and D represent ions or compounds.
To learn more about chemical reactions:
https://brainly.com/question/13476520
#spj4
what is the molar solubility of fe(oh) 3 in a solution with a hydroxide ion concentration of 0.050 m?
The Molar solubility of Fe(OH)3 in a solution with a hydroxide ion concentration of 0.050 M is 2.2 × 10^-35 M.
The molar solubility of Fe(OH)3 in a solution with a hydroxide ion concentration of 0.050 M can be calculated using the solubility product constant (Ksp) of Fe(OH)3. The equation for the equilibrium of Fe(OH)3 in water is:
Fe(OH)3(s) ⇌ Fe3+(aq) + 3OH-(aq)
The Ksp expression for this equilibrium is:
Ksp = [Fe3+][OH-]^3
Where [Fe3+] and [OH-] are the equilibrium concentrations of the Fe3+ ion and the OH- ion, respectively. At the molar solubility, the concentration of Fe3+ will be equal to the molar solubility, x, and the concentration of OH- will be 0.050 M. Therefore, we can write:
Ksp = x[0.050]^3
Substituting the Ksp value for Fe(OH)3 (2.8 × 10^-39) into the equation and solving for x gives:
x = Ksp / [0.050]^3
x = (2.8 × 10^-39) / (0.050)^3
x = 2.2 × 10^-35 M
To know more about Molar solubility refer,
https://brainly.com/question/28170449#
#SPJ11
seasonal variations in co2 recorded at mauna loa observatory are related to ________.
Seasonal variations in CO2 recorded at Mauna Loa Observatory are related to the natural cycles of vegetation growth and decay. During the Northern Hemisphere winter months, plants go through a dormant phase, leading to a decrease in photosynthesis and an increase in atmospheric CO2 levels.
In the spring and summer months, plants undergo active growth, which results in increased photosynthesis, and a decrease in atmospheric CO2 levels. This natural cycle is known as the seasonal carbon cycle.
Additionally, the burning of fossil fuels is a significant contributor to the overall increase in atmospheric CO2 levels, which is separate from the seasonal variations. Human activities, such as burning fossil fuels for transportation and energy production, have significantly altered the natural carbon cycle and contribute to the overall increase in CO2 concentrations. However, the seasonal variations at Mauna Loa Observatory are primarily driven by the natural cycle of vegetation growth and decay.
To know more about CO2 levels click this link-
brainly.com/question/30194690
#SPJ11
Determine the resulting pH when 0. 040 mol of solid NaOH is added to a 200. 0 mL buffer containing 0. 100 mol C6H5NH3Cl and 0. 500 M C6H5NH2. The value of Kb for C6HNH2 is 4. 3 × 10-10
Calculating the new concentrations of the conjugate acid and base following the addition is necessary in order to determine the pH that will be produced when a solid NAOH is added to the buffer solution.
The reaction between NAOH and C₆H₅NH₂ has a balanced equation that looks like this:
NaOH + C₆H₅NH₂ NaC₆H₅NH₂ + H₂O
According to the stoichiometry of this reaction, one mole of C₆H₅NH₂ is consumed for every mole of NAOH added, resulting in one mole of NaC₆H₅NH₂.
Introductory convergences of the support parts:
[C₆H₅NH₃Cl] = 0.100 mol/0.200 L = 0.500 M
[C₆H₅NH₂] = 0.500 M
After the expansion of 0.040 mol of NAOH, the grouping C₆H₅NH₂ will diminish by 0.040 mol/0.200 L = 0.200 M. The convergence NaC₆H₅NH₂ will be 0.040 mol/0.200 L = 0.200 M.
The response between C₆H₅NH₂ and water creates C₆H₅NH₃+ Gracious particles. C₆H₅NH₂ 's Kb expression is as follows:
Kb = [C₆H₅NH₃+][OH-]/[C₆H₅NH₂]
We can expect that the convergence [OH-] is equivalent to the grouping of NAOH added, which is 0.040 mol/0.200 L = 0.200 M. The grouping C₆H₅NH₃+ can be determined utilizing the Henderson-Hasselbalch condition:
pH = pKa + log([C₆H₅NH₂]/[C₆H₅NH₃+])
The pKa of C₆H₅NH₃+ isn't given, however, we can utilize the estimation pKa = 9.24 C₆H₅NH₃+. Thus, pH equals 9.24 times log(0.500/0.300) = 9.64.
As a result, the pH of the buffer solution after adding 0.040 mol of NAOH is 9.64.
To learn more about acid here
https://brainly.com/question/29796621
#SPJ4
if some solid ca(oh)2 is transferred into the titration flask in part 1, will the calculated ksp value for ca(oh)2 be higher or lower than the accepted value? explain.
If some solid Ca(OH)2 is transferred into the titration flask in part 1, the calculated KSP value for Ca(OH)2 will be lower than the accepted value.
This is because adding more solid Ca(OH)2 to the titration flask will increase the concentration of Ca(OH)2 in the solution, which will cause more of it to dissolve and react with HCl. As a result the calculated concentration on OH- ions will be higher, which would eventually lead to a higher calculated KSP value.
However, the accepted value of KSP for Ca(OH)2 is based on an experimental data and is therefore the most accurate value. The calculated value obtained through the titration may deviate from the accepted value due to experimental errors or other factors. Therefore, it is important to use accepted values as a reference point for the accuracy of experimental results.
Learn more about Titration here:- brainly.com/question/186765
#SPJ11
the galvanic cell cu (s) 2 ag (aq) --> cu2 (aq) 2 ag (s) has the following thermodynamic properties: δhºrxn = -145 kj/mol and δsºrxn = -193 j/mol·k. what is the value of δgºrxn at 298 k?
Answer:
The value of ΔG°rxn at 298 K is approximately -87.4 kJ/mol.
Explanation:
To find the value of ΔG°rxn, we can use the equation:
ΔG°rxn = ΔH°rxn - TΔS°rxn
Where ΔH°rxn is the standard enthalpy change, ΔS°rxn is the standard entropy change, T is the temperature in Kelvin, and ΔG°rxn is the standard free energy change.
The given values are:
ΔH°rxn = -145 kJ/mol
ΔS°rxn = -193 J/mol·K
T = 298 K
First, we need to convert ΔS°rxn from J/mol·K to kJ/mol·K:
ΔS°rxn = -193 J/mol·K / 1000 J/kJ = -0.193 kJ/mol·K
Now we can plug in the values and calculate ΔG°rxn:
ΔG°rxn = -145 kJ/mol - (298 K)(-0.193 kJ/mol·K)
ΔG°rxn = -145 kJ/mol + 57.614 kJ/mol
ΔG°rxn ≈ -87.4 kJ/mol
Therefore, the value of ΔG°rxn at 298 K is approximately -87.4 kJ/mol.
To learn more about ΔG°rxn refer here:
https://brainly.com/question/16185240#
#SPJ11
suppose you perform a cannizzaro reaction with 1.351 g of benzaldehyde, which has a molar mass of 106.124 g/mol, with an excess of base. what is the theoretical yield (in g) of benzoic acid, which has a molar mass of 122.123 g/mol, from the reaction?
The theoretical yield of benzoic acid from the reaction is 0.779 g which has a molar mass of 122.123 g/mol.
The Cannizzaro reaction is a chemical reaction in which an aldehyde is oxidized to a carboxylic acid and a corresponding alcohol in the presence of a strong base. The reaction is typically carried out in the presence of an excess of base, and the theoretical yield of the product can be calculated using stoichiometry.
In this case, the reactant is benzaldehyde with a molar mass of 106.124 g/mol. The reaction product is benzoic acid, which has a molar mass of 122.123 g/mol. To calculate the theoretical yield of benzoic acid, we need to determine the balanced equation for the reaction and the limiting reagent.
The balanced equation for the Cannizzaro reaction is:
2RCHO + OH- → RCOOH + RCH2OH
This equation indicates that two moles of aldehyde react with one mole of base to produce one mole of carboxylic acid and one mole of alcohol. Therefore, the stoichiometric ratio of aldehyde to carboxylic acid is 2:1.
In this case, we are given 1.351 g of benzaldehyde, which we can convert to moles using the molar mass:
1.351 g benzaldehyde / 106.124 g/mol = 0.01273 mol benzaldehyde
Since the stoichiometric ratio of aldehyde to carboxylic acid is 2:1, we can calculate the theoretical yield of benzoic acid:
0.01273 mol benzaldehyde x (1 mol benzoic acid / 2 mol benzaldehyde) x 122.123 g/mol = 0.779 g benzoic acid
Therefore, the theoretical yield of benzoic acid from the reaction is 0.779 g.
for more such question on theoretical yield
https://brainly.com/question/30795308
#SPJ11
Which of these compounds is an isomer of 1-propanethiol? 2-propanethiol ethylmethylsulfide both of these n either of these
[tex]1-propanethiol[/tex]and [tex]2-propanethiol[/tex]are structural isomers, meaning that they have the same molecular formula (C₃H₈S) but different structural arrangements. The correct answer is option a.
In[tex]1-propanethiol[/tex], the sulfur atom is attached to the first carbon atom of the propane chain, whereas in [tex]2-propanethiol[/tex], the sulfur atom is attached to the second carbon atom of the propane chain. This structural difference results in different chemical and physical properties for each compound.
On the other hand, ethylmethylsulfide has a different molecular formula (C₃H₈S), which means it is not an isomer of[tex]1-propanethiol[/tex]. Ethylmethylsulfide has an ethyl group (-CH₂CH₃) and a methyl group (-CH₃) attached to the sulfur atom, which makes it a different compound altogether.
Therefore, the answer to the question is that [tex]2-propanethiol[/tex] is an isomer of [tex]1-propanethiol[/tex], but ethylmethylsulfide is not an isomer of [tex]1-propanethiol.[/tex]
The correct answer is option a.
To know more about structural isomers refer to-
https://brainly.com/question/13422357
#SPJ11
Complete question
Which of these compounds is an isomer of 1-propanethiol?
a. 2-propanethiol
b. ethylmethylsulfide
c. both of these
d. either of these
a buffer solution is composed of 3.92 mol of acid and 5.52 mol of the conjugate base. if the pka of the acid is 2.63, what is the ph of the buffer? in your answer, include 2 decimals. a buffer solution is composed of 3.92 mol of acid and 5.52 mol of the conjugate base. if the pka of the acid is 2.63, what is the ph of the buffer? in your answer, include 2 decimals.
The pH of the buffer is 2.81, rounded to 2 decimal places.
To calculate the pH of the buffer, we need to use the Henderson-Hasselbalch equation, which relates the pH of a buffer solution to the pKa of the weak acid and the ratio of its conjugate base to weak acid. The equation is:
pH = pKa + log([A-]/[HA])
where [A-] is the concentration of the conjugate base, and [HA] is the concentration of the weak acid.
In this case, we are given the concentrations of the weak acid and its conjugate base:
[HA] = 3.92 mol
[A-] = 5.52 mol
We also know the pKa of the acid:
pKa = 2.63
Substituting these values into the Henderson-Hasselbalch equation, we get:
pH = 2.63 + log(5.52/3.92)
pH = 2.63 + 0.1837
pH = 2.81
Therefore, the pH of the buffer is 2.81, rounded to 2 decimal places.
For more such questions on buffer
https://brainly.com/question/8676275
#SPJ11
A 1.00L solution contains 3.25X10^-4 M Cu(NO3)2 and 2.40X10^-3 M ethylenediamine (en). The Kf for Cu(en)2^2+ is 1X 10^20. What is the concentration of Cu^2+ (aq) in the solution?
The concentration of Cu^2+ (aq) in the solution is 3.25X10^-4 M.
To find the concentration of Cu^2+ (aq) in the solution, we first need to determine the concentration of Cu(en)2^2+. We can use the formation constant (Kf) for Cu(en)2^2+ to do this:
Kf = [Cu(en)2^2+]/[Cu^2+][en]^2
We know Kf = 1X10^20 and [en] = 2.40X10^-3 M, so we can rearrange the equation and solve for [Cu(en)2^2+]:
[Cu(en)2^2+] = Kf[Cu^2+][en]^2
[Cu(en)2^2+] = (1X10^20)(3.25X10^-4 M)(2.40X10^-3 M)^2
[Cu(en)2^2+] = 4.68X10^11 M
Now we can use the stoichiometry of the Cu(NO3)2 and Cu(en)2^2+ reactions to determine the concentration of Cu^2+ (aq) in the solution:
Cu(NO3)2 + 2en → Cu(en)2^2+ + 2NO3^-
For every 1 mole of Cu(NO3)2, we get 1 mole of Cu(en)2^2+. Therefore, the concentration of Cu^2+ (aq) in the solution is equal to the concentration of Cu(NO3)2:
[Cu^2+] = 3.25X10^-4 M
To refer more about CONCENTRATION refer,
https://brainly.com/question/10725862#
#spj11
an 1120 ml sample of a pure gaseous compound, measured at stp is found to have a mass of 2.86 grams. what is the molar mass of the compound?
The molar mass of the 1120 mL sample of a pure gaseous compound is found to be 48 g/mol.
To find the molar mass of the compound, we can use the ideal gas law:
PV = nRT, the pressure is P, volume is V, number of moles is n, gas constant is R, temperature. is T At STP (standard temperature and pressure), we have, P = 1 atm, V = 1.120 L, T = 273.15 K and R = 0.08206 L·atm/mol·K. From the mass of the sample, we can calculate the number of moles of the compound using its density at STP,
density = mass/volume
= 2.86 g/1.120 L
= 2.55 g/L
The molar mass of the compound is then,
molar mass = mass/number of moles
= 2.86 g/(2.55 g/L × 0.08206 L·atm/mol·K × 273.15 K) ≈ 48 g/mol
Therefore, the molar mass of the compound is approximately 48 g/mol.
To know more about ideal gas law, visit,
https://brainly.com/question/27870704
#SPJ4
Draw the structure of alpha-ketoglutarate that is generated in a reaction catalyzed by glutamate dehydrogenase and that is a precursor to the urea cycle. You do not have to consider stereochemistry. Assume a pH of 7.
Here is the structure of alpha-ketoglutarate
O
||
H3N--C--CH2--C--COO-
|
COOH
To draw the structure of alpha-ketoglutarate by glutamate dehydrogenase and being a precursor to the urea cycle, follow these steps:
1. Start with the backbone structure of a 5-carbon molecule, arranged in a linear chain.
2. At the first carbon (C1), attach a carboxyl group (COOH). Due to the pH of 7, the carboxyl group will lose a proton, forming a carboxylate ion (COO-).
3. At the second carbon (C2), attach a carbonyl group (C=O).
4. At the third carbon (C3) and fourth carbon (C4), attach hydrogen atoms.
5. At the fifth carbon (C5), attach another carboxyl group (COOH). Again, due to the pH of 7, this carboxyl group will lose a proton, forming a carboxylate ion (COO-).
Your resulting structure of alpha-ketoglutarate will have the following formula:
O
||
H3N--C--CH2--C--COO-
|
COOH
This structure is generated in the reaction catalyzed by glutamate dehydrogenase and serves as a precursor to the urea cycle.
To know more about alpha-ketoglutarate refer here:
https://brainly.com/question/29602582
#SPJ11
in many titrations, you need to add an indicator that changes color when the titration is complete. the titration of sodium oxalate with potassium permanganate does not use an indicator. however, a pink color does appear to signal the end of the titration. what causes the color change signaling the completed titration of sodium oxalate with potassium permanganate? select one: the pink color of the reactant permanganate appears in solution after all of the oxalate has reacted. the last oxalate ion creates a pink precipitate when enough permanganate has been added. carbon dioxide reacts with excess permanganate, creating a pink complex. the manganese product of the reaction has a pink color that only appears after stirring.
The pink color that appears at the end of the titration of sodium oxalate with potassium permanganate is caused by the formation of a pink complex.
This occurs because potassium permanganate is a strong oxidizing agent and reacts with sodium oxalate, which is a reducing agent. As the reaction progresses, the potassium permanganate is reduced to manganese dioxide, which forms a pink complex with excess potassium hydroxide present in the solution. This pink color signals the end of the titration because all of the sodium oxalate has been oxidized by the potassium permanganate. Unlike other titrations, an indicator is not required in this titration because the pink color is a clear visual signal that the titration is complete. Therefore, the correct answer to the question is that carbon dioxide does not react with excess permanganate, and the pink color is not caused by the reactant permanganate appearing in solution or by the formation of a pink precipitate.
learn more about titration here
https://brainly.com/question/31271061
#SPJ11
How much heat is required to convert a 42.30-g block of ice at -5.042 °C into water vapor at 150.35 °C?
The amount of heat required to convert a 42.30-g block of ice at -5.042 °C into water vapor at 150.35 °C is 133108.0 J.
To calculate the amount of heat required to convert a given amount of ice at a given temperature to water vapor at a higher temperature, we need to consider the different phases of matter and the heat required for each phase change.
The total heat required can be calculated as follows:
Heat required to melt ice: Q1 = m × ΔHfusHeat required to warm up water from 0°C to 100°C: Q2 = m × Cp × ΔTHeat required to vaporize water: Q3 = m × ΔHvapHeat required to warm up steam from 100°C to final temperature: Q4 = m × Cp × ΔTwhere m is the mass of the sample, Cp is the specific heat capacity, ΔT is the change in temperature, ΔHfus is the heat of fusion, and ΔHvap is the heat of vaporization.We can calculate these values as follows:
Q1 = 42.30 g × 334 J/g = 14128.2 JQ2 = 42.30 g × 4.184 J/g °C × (100 - (-5.042)) °C = 19983.1 JQ3 = 42.30 g × 2257 J/g = 95487.0 JQ4 = 42.30 g × 1.84 J/g °C × (150.35 - 100) °C = 3509.7 JThe total heat required is the sum of these values:
Q = Q1 + Q2 + Q3 + Q4 = 14128.2 J + 19983.1 J + 95487.0 J + 3509.7 J = 133108.0 J
Therefore, the amount of heat required to convert a 42.30-g block of ice at -5.042 °C into water vapor at 150.35 °C is 133108.0 J.
To know more about water vapor refer to-
https://brainly.com/question/22349941
#SPJ11
when a transistor is in hard saturation, its collector-emitter terminals appear approximately
Shorted Open Both of the above None of the above
In hard saturation, the collector-emitter terminals of a transistor appear approximately shorted.
When a transistor is in hard saturation, its collector-emitter terminals appear shorted.
Therefore, the collector-emitter terminals of a transistor appear approximately shorted.
To know more about hard saturation refer here:
https://brainly.com/question/3815794
#SPJ11
