21. In the context of digital circuits, what is feedback?

The most common result of overuse of dynamic processing is a loss of natural dynamics and a squashed, lifeless sound.

The most common result of overuse of dynamic processing is an unnatural, artificial sound with reduced dynamic range. Overuse of compression, limiting, and other dynamic processing can result in a "pumping" or "breathing" effect, where the volume level of the audio signal is unnaturally fluctuating.

This can be caused by excessive gain reduction, overly aggressive attack and release settings, or using too much processing on individual tracks or the master output. It's important to use dynamic processing judiciously and make sure the result sounds natural and transparent.

You can learn more about dynamic processing  at

https://brainly.com/question/30080824

#SPJ11

Server Density is a measure of how many virtual servers are running on a physical server. In other words, it is a measure of how condensed servers are as a result of virtualization. The more virtual servers running on a physical server, the higher the server density.

A higher server density can lead to greater efficiency and cost savings, as it allows organizations to make better use of their resources. However, it can also lead to potential performance issues if the physical server is unable to handle the load.

Therefore, it is important to carefully monitor server density and adjust it as needed to ensure optimal performance and resource utilization. In summary, server density is a critical measure of virtualization effectiveness and should be given careful consideration when deploying and managing virtualized environments.

To know more about Density visit -

brainly.com/question/29775886

#SPJ11

The given statement "A control that shows a message to the user that must be dismissed before anything else can be done in the app." is False because the control is designed to temporarily halt other interactions within an app until the user addresses the message or prompt

The control you are describing is known as a modal dialog or a modal window. A modal dialog is a type of user interface element that displays a message or prompts the user for input, and it requires the user's attention before any other actions can be taken within the application. This type of control is commonly used for important notifications, error messages, or data input tasks that must be completed or acknowledged by the user before they can proceed with their work in the app.

Modal dialogs help to ensure that users do not accidentally overlook critical information or actions by forcing them to interact with the displayed content before returning to the main application. However, it is essential to use modal dialogs judiciously, as overusing them can lead to a disruptive and frustrating user experience.

In summary, the statement is false because the control you mentioned is called a modal dialog or modal window, which is designed to temporarily halt other interactions within an app until the user addresses the message or prompt. This control is useful for essential notifications or tasks but should be used sparingly to avoid disrupting the user experience.

Know more about Modal window here :

https://brainly.com/question/31678126

#SPJ11

Switch rip to version 2 is "router rip". The command "router rip" enters the RIP configuration mode, where you can configure various RIP parameters.

RIP (Routing Information Protocol) is a protocol used by routers to exchange routing information between them. There are two versions of RIP: RIP version 1 and RIP version 2. RIP version 2 is an improvement over version 1, as it supports variable-length subnet masks (VLSMs), authentication, and multicast updates.

To specifically switch to version 2, the command "version 2" needs to be added after "router rip". Therefore, the correct command to switch rip to version 2 is "router rip version 2".

To know more about RIP visit:-
https://brainly.com/question/26872828

#SPJ11

In JavaScript, the Array.prototype.join( separator ) syntax is used to convert all the elements of an array into a string.

The separator argument specifies how the elements of the array will be separated in the resulting string. If no separator argument is provided, the elements are joined together with a comma.

For example, if we have an array of numbers [1, 2, 3] and we want to join them together with a hyphen, we can use the following syntax: var numbers = [1, 2, 3]; var hyphenatedNumbers = numbers.join("-");

The resulting string would be "1-2-3".

This method is particularly useful when you need to display the elements of an array as a single string. It can also be used in conjunction with other string manipulation methods to format the output in a specific way.

Learn more about JavaScript at

https://brainly.com/question/31666710

#SPJ11

The number of revolution that the CD makes as it spins to a stop depends on the initial speed of the CD and the rate at which it decelerates.

the initial angular velocity is 500 revolutions per minute (rpm) and the angular acceleration is -20.1 rad/s2.

We can convert 500 rpm to radians per second by multiplying by 2π/60, which gives 52.4 rad/s.

Then we can use the formula for angular displacement, which is Δθ = ω0t + (1/2)αt^2, where ω0 is the initial angular velocity, α is the angular acceleration, and t is the time.

We know that the CD stops when its final angular velocity is zero, so we can use another formula, ω = ω0 + αt, to find the time it takes to stop.

Solving for t gives t = -ω0/α = -52.4/-20.1 = 2.61 s. Plugging this into the formula for angular displacement gives Δθ = (52.4)(2.61) + (1/2)(-20.1)(2.61)^2 = 68.3 rad.

To convert this to revolutions, we divide by 2π, which gives 10.9 revolutions. Therefore, the CD makes about 10.9 revolutions as it spins to a stop.

to learn more about  angular acceleration click here:

brainly.com/question/29428475

#SPJ11

The following task must be performed prior to creating a spanned, striped, or mirrored volume on unallocated space in Windows :

d. Convert basic disks to dynamic disks.

Before creating a spanned, striped, or mirrored volume, you need to convert basic disks to dynamic disks in Windows. This enables more advanced storage management and features, such as the ability to create the mentioned volume types.

Shrinking each disk volume to an equal size is not necessary when creating these types of volumes, as Windows will automatically allocate space across the disks based on their available capacity.

Assigning drive letters to each of the separate disks may be necessary after the volume is created, but it is not a requirement prior to creating the volume.

To learn more about Windows visit : https://brainly.com/question/27764853

#SPJ11

The ALU (Arithmetic Logic Unit) knows which function to perform based on the control signals it receives from the control unit. These signals determine the specific operation, such as addition, subtraction, or logical operations, to be executed by the ALU.

The Arithmetic Logic Unit (ALU) is responsible for performing various mathematical and logical operations in a computer's CPU. It can perform operations such as addition, subtraction, multiplication, division, AND, OR, NOT, and more. The ALU knows which function to perform based on the instruction provided by the Control Unit (CU). The CU decodes the instruction fetched from the memory and determines which operation the ALU needs to perform. The instruction contains an opcode that specifies the operation and the operands on which the operation is to be performed. The ALU then uses the operands to perform the specified operation and provides the result back to the CU, which stores it in the designated memory location. Therefore, the ALU receives instructions from the CU, which tells it which function to perform based on the opcode provided.

learn more about ALU (Arithmetic Logic Unit)  here:

https://brainly.com/question/14247175

#SPJ11

Some potential strategies that Apple can consider in the ideation stage include diversifying its supplier base, implementing advanced technologies such as AI and machine learning.

The 3i design thinking model is a useful framework for developing strategies that can help Apple regain market share caused by supply chain disruptions. The model consists of three stages: inspiration, ideation, and implementation.

Inspiration: In this stage, Apple needs to gather information and insights on the nature of the problems caused by the supply chain disruptions. These disruptions may have resulted in delays in product delivery, increased costs, reduced quality, and decreased customer satisfaction.

Apple can conduct market research, analyze customer feedback, and collaborate with suppliers to gain a better understanding of the issues.

Ideation: In this stage, Apple can generate ideas and potential solutions to the problems identified in the inspiration stage. Some potential strategies that Apple can consider include:

Learn more about potential strategies

brainly.com/question/29759403

#SPJ11

Mark-sweep and stop-copy are both eager approaches to garbage collection in single size cell heap management.

In mark-sweep, the memory space is first marked as either in use or free, and then the free memory blocks are swept and marked as available. This process is performed eagerly when the program is actively running. Similarly, in stop-copy, the heap space is divided into two sections and as the heap space becomes full, the program stops to copy all the live objects to the other section of the heap, marking the previous space as free. This process also occurs eagerly.

Both of these methods require significant processing power and can impact program performance when actively running, but they ensure that the memory is effectively managed and that there are no issues with dangling pointers or memory leaks.

You can learn more about heap management at

https://brainly.com/question/29993983

#SPJ11

120 base 10 will give you  1111000 in Binary number.

Binary number is a number expressed in the base-2 numeral system, which represented numbers by 0s and 1s (just two digits).

Popular, we know that the decimal numeral system uses 10 digits (0-9) to represent numbers.

To convert Base 10 to Base 2, you simply have to be dividing the base 10 number by 2 and be recording the remainders.

When there is nothing to divide again, then you write out the remainder from the very last division and y0ou get your answer.

Learn more about binary number here:

https://brainly.com/question/30768397

#SPJ1

To remedy the lack of procedural functionality in SQL, and to provide some standardization within the many vendor offerings, the SQL-99 standard defined the use of persistent stored modules. True.

The SQL-99 standard introduced Persistent Stored Modules (PSMs) to remedy the lack of procedural functionality in SQL and to provide a standardized way of defining and using stored procedures and functions across different vendor offerings. PSMs are database objects that encapsulate procedural code, allowing it to be stored and executed within the database server. They are similar to stored procedures and functions in other programming languages and are used to perform various tasks, such as data validation, data transformation, and business logic implementation within the database.

To know more about SQL visit:

https://brainly.com/question/31586609

#SPJ11

True.It is common practice to reserve a portion of the physical server's memory, typically around 20 percent, for the hypervisor to ensure efficient virtual machine management and performance.  

This reserved memory is not available for use by any virtual machines running on the hypervisor.It is common practice to reserve approximately 20 percent of the physical server memory for the exclusive use of the hypervisor. This helps ensure efficient virtualization and system performance.

Controlling access to hardware, including memory, is a hypervisor's main function. Each virtual machine's memory is partitioned up such that each one "sees" its memory in the same manner as a real computer does.

To know more about hypervisor visit:-

https://brainly.com/question/31257671

#SPJ11

To enable Universal Containers' sales team to access information about closed-won opportunities with a common competitor for all pending big deals, the system administrator should implement the following features:

1. Custom Reports: Create custom reports focusing on closed-won opportunities that include details about the competitors. This will allow the sales team to access valuable insights into the factors that contributed to past successful deals.

2. Dashboards: Design dashboards that display key metrics and trends related to closed-won opportunities with the common competitor. This will provide an easy-to-understand visual representation of the data and help the sales team make informed decisions.

3. Shared Folders: Set up shared folders to store relevant documents and resources, such as competitor profiles and market analyses. This will ensure that the sales team has easy access to the information they need to effectively address pending big deals.

4. Custom Fields: Add custom fields to the opportunity object, capturing essential information about competitors, such as strengths, weaknesses, and potential strategies. This will help the sales team better understand the competitive landscape and tailor their approaches accordingly.

5. Collaboration Tools: Implement collaboration tools, such as Chatter, to facilitate communication among the sales team. This will enable team members to share insights and best practices related to the common competitor, ensuring a coordinated effort in addressing pending big deals.

By implementing these features, the sales team will be well-equipped to access and leverage the necessary information to successfully compete against the common competitor in pending big deals.

Learn more about Dashboards  here:

https://brainly.com/question/31843071

#SPJ11

Heap management can be done using explicit memory management for greater control, or implicit memory management for ease and stability. Each method has its advantages and trade-offs, depending on the needs of the specific program.

Heap management can be done in two primary ways: explicit and implicit memory management.

Explicit memory management involves manual allocation and deallocation of memory by the programmer. This method provides greater control over memory usage, but requires careful management to avoid memory leaks or improper access.

Common functions used for explicit management are malloc(), calloc(), realloc(), and free() in the C programming language.

Implicit memory management, also known as garbage collection, automatically handles memory allocation and deallocation, reducing the chances of memory leaks and improving program stability. This approach is commonly used in languages like Java, Python, and C#. While convenient, it may result in less control over memory usage and performance.

Learn more about explicit and implicit memory at

https://brainly.com/question/28754403

#SPJ11

To express the greatest common divisor (GCD) of a pair of integers as a linear combination of the integers, we use the extended Euclidean algorithm.

This involves finding the GCD and then working backwards through the steps of the Euclidean algorithm to express it as a linear combination of the original integers.

a) GCD(10, 11) = 1, and working backwards through the algorithm, we get 1 = 11 - 1(10). So the linear combination is 1(10) + (-1)(11) = -1.

b) GCD(21, 44) = 1, and working backwards through the algorithm, we get 1 = -2(21) + 1(44). So the linear combination is (-2)(21) + (1)(44) = 2.

c) GCD(36, 48) = 12, and working backwards through the algorithm, we get 12 = 1(36) - 1(48). So the linear combination is 1(36) + (-1)(48) = -12.

d) GCD(34, 55) = 1, and working backwards through the algorithm, we get 1 = 2(34) - 1(55). So the linear combination is 2(34) + (-1)(55) = -21.

e) GCD(117, 213) = 3, and working backwards through the algorithm, we get 3 = -19(117) + 10(213). So the linear combination is (-19)(117) + (10)(213) = 1113.

f) GCD(0, 223) = 223, and working backwards through the algorithm, we get 223 = 0(0) + 1(223). So the linear combination is 0(0) + 1(223) = 223.

g) GCD(123, 2347) = 1, and working backwards through the algorithm, we get 1 = -19(123) + 1(2347). So the linear combination is (-19)(123) + (1)(2347) = 2208.

h) GCD(3454, 4666) = 82, and working backwards through the algorithm, we get 82 = -9(3454) + 7(4666). So the linear combination is (-9)(3454) + (7)(4666) = 31180.

i) GCD(9999, 11111) = 1, and working backwards through the algorithm, we get 1 = -101(9999) + 90(11111). So the linear combination is (-101)(9999) + (90)(11111) = 1.

In each case, we can express the GCD as a linear combination of the original integers, using the steps of the extended Euclidean algorithm.
To express the greatest common divisor (GCD) of each pair of integers as a linear combination of these integers, we can use the Extended Euclidean Algorithm. I will demonstrate this for the first three pairs, and you can follow the same method for the remaining pairs.

a) 10, 11
Since 11 is prime, its only divisors are 1 and itself. The GCD is 1.
1 = 1*10 + (-1)*11

b) 21, 44
1. Divide 44 by 21: 44 = 21*2 + 2
2. Divide 21 by 2: 21 = 2*10 + 1 (remainder 1 means GCD is 1)
3. Express 1 as a linear combination:
  1 = 21 - 2*10 = 21 - 2*(44 - 21*2) = (-2)*44 + 5*21

c) 36, 48
1. Divide 48 by 36: 48 = 36*1 + 12
2. Divide 36 by 12: 36 = 12*3 + 0 (remainder 0 means GCD is 12)
3. Express 12 as a linear combination:
  12 = 48 - 36*1

For the remaining pairs, follow the same steps to find the GCD and express it as a linear combination of the integers.

Learn more about algorithm at : brainly.com/question/22984934

#SPJ11

An arrow pointing down over a device in a customer's Device Manager usually indicates that the device is disabled. C

The device is physically connected to the computer, but the operating system is not allowing it to function.

The device may have been intentionally disabled by the user or the system administrator, or it may have been disabled automatically due to a driver issue or some other problem.

To check if this is the case, the user can try right-clicking on the device in the Device Manager and selecting "Enable Device" from the context menu. If the device is enabled successfully, the arrow pointing down should disappear, and the device should start functioning properly.

The device cannot be enabled or the arrow pointing down persists, it may indicate a more serious problem, such as a faulty driver or hardware issue.

The user may need to update the device driver or seek further assistance from technical support.

For similar questions on Device

https://brainly.com/question/12158072

#SPJ11

The statement "100 milliseconds refers to the amount of time it takes for a publisher to serve an ad to a single consumer when they click on a webpage" is b. false.

This duration can vary depending on various factors like network latency and ad server response time.

The time it takes for an ad to be served can differ due to factors such as the consumer's internet speed, the publisher's ad server efficiency, and the complexity of the ad content.

There is no fixed duration like 100 milliseconds for this process, as it can be faster or slower based on the circumstances.

The main goal for publishers is to optimize their ad serving process to minimize latency and provide a seamless user experience.

To know more about webpage visit:

brainly.com/question/30407344

#SPJ11

The statement "a program counter points to the memory address of the instruction that the CPU is currently executing." is true (T).

A program counter (PC) is a component in a computer's central processing unit (CPU) that holds the memory address of the instruction currently being executed. It ensures that the CPU knows where to find the next instruction in the computer program. As each instruction is executed, the program counter is incremented to point to the next instruction in the sequence.

For example, let's say that the PC initially holds the memory address of the first instruction in a program. The CPU fetches the instruction from that memory address, executes it, and then increments the PC to point to the next instruction in memory. The CPU fetches the next instruction from that memory address, executes it, and increments the PC again to point to the next instruction. This process continues until the program is complete.

To learn more about CPU visit : https://brainly.com/question/474553

#SPJ11

The java program is given below that takes integers usernum and divnum as input and produces the quotient as output:

import java.util.InputMismatchException;

import java.util.Scanner;

public class Division {

   public static void main(String[] args) {

       Scanner input = new Scanner(System.in);

       int usernum = 0, divnum = 0, quotient = 0;        

       try {

           System.out.print("Enter an integer numerator: ");

           usernum = input.nextInt();  

           System.out.print("Enter an integer divisor: ");

           divnum = input.nextInt();

           quotient = usernum / divnum;      

           System.out.println("Quotient: " + quotient);

       }

       catch (ArithmeticException e) {

           System.out.println("Exception caught: " + e.getMessage());

       }

       catch (InputMismatchException e) {

           System.out.println("Exception caught: " + e.toString());

       }

       input.close();

   }

}

Explanation:

In this program, we first declare variables usernum, divnum, and quotient, and initialize them to 0. We then use a Scanner object to read input from the user for the numerator and divisor. Inside the try block, we attempt to divide usernum by divnum to compute the quotient, and then output the quotient. If an ArithmeticException is thrown (i.e., if divnum is 0), we catch the exception and output an exception message using the getMessage() method of the exception object. If an InputMismatchException is thrown (i.e., if the user inputs a non-integer value), we catch the exception and output an exception message using the toString() method of the exception object. Finally, we close the Scanner object to free up system resources.

To know more about exception handling click here:

https://brainly.com/question/29869455

#SPJ11

correct answer: A. N-tier deployment. N-tier deployment can be described as putting each resource on a dedicated subnet behind a demilitarized zone (DMZ) and separating it from the internal local area network (LAN).

In this architecture, resources are organized into separate tiers or layers, each with specific functions. This separation allows for better security, scalability, and manageability of the overall system.

N-tier deployment is a network architecture that divides an application into multiple tiers or layers, each with a specific function and responsibility.

For example, a web application can have three tiers: a presentation tier that handles the user interface, a business logic tier that processes the requests and data, and a data tier that stores and retrieves the data. Each tier can be hosted on a different server or subnet, and separated by firewalls or DMZs. This improves scalability, performance, and security of the application.

The other options are not related to this description. Simplicity is not a network concept, but a general principle of design. Single defense is not a recommended security strategy, as it relies on one layer of protection that can be easily bypassed. Virtual LAN is a network concept, but it does not imply putting resources behind a DMZ or separating them from the internal LAN.

to learn more about N-tier click here:

brainly.com/question/30825126

#SPJ11

To secure your WAP/router, you can change the default SSID name, enable DHCP, and disable remote administration.

To secure your wireless access point (WAP)/router, you can perform several actions, including:

A. Change the default SSID name: Changing the default SSID name makes it more difficult for attackers to identify the network.

B. Turn off SSID broadcasting: Turning off SSID broadcasting makes it harder for attackers to discover the network, but it can also cause compatibility issues with some devices.

C. Enable DHCP: Enabling DHCP (Dynamic Host Configuration Protocol) automatically assigns IP addresses to devices on the network and helps prevent unauthorized access.

D. Disable DHCP: Disabling DHCP requires that each device on the network has a static IP address assigned manually, which can be more secure but is also more difficult to manage.

For more such questions on WAP:

https://brainly.com/question/30927344

#SPJ11

Overflow is a situation that occurs when a mathematical operation produces a result that exceeds the maximum value that can be represented by a given number of bits.

Overflow can be detected by examining the most significant bit of the result. If the most significant bit is 1, then overflow has occurred. In unsigned numbers, overflow occurs when the result is too large to be represented by the number of bits used to store the value. In signed numbers, overflow occurs when the result is too large or too small to be represented by the number of bits used to store the value. This is because signed numbers use one bit to represent the sign, reducing the number of bits available to represent the magnitude of the number. To detect overflow in signed numbers, the most significant bit and the sign bit are examined. If the sign bit and the most significant bit are different, then overflow has occurred.

Learn more about magnitude here-

https://brainly.com/question/14452091

#SPJ11

Array.prototype.find() is a method in JavaScript used to search for and return the first element in an array that satisfies a specified condition. It takes a callback function as its argument, which is executed for each element in the array until a match is found.

The callback function accepts three parameters:

1. element: The current element being processed in the array.

2. index (optional): The index of the current element in the array.

3. array (optional): The array on which the find() method is being called.

The find() method returns the value of the first element that meets the specified condition, or undefined if no such element is found. Here is the syntax for the find() method: array.find(callback(element, index, array));

An example of using Array.prototype.find() in JavaScript: const numbers = [1, 2, 3, 4, 5]; const foundNumber = numbers.find(element => element > 2); console.log(foundNumber); // Output: 3 In this example, the find() method returns the first number greater than 2, which is 3.

Learn more about JavaScript at

https://brainly.com/question/16698901

#SPJ11

When implementing a ducking technique, we do not want the compressor to react too quickly, as this can draw attention to the attenuation effect. In this case, the "detector" in the side chain should be set to a slower attack time,.

Because it allows the compressor to respond more gradually to changes in the input signal. This can help to create a more natural-sounding ducking effect that is less noticeable to the listener. Other factors, such as the release time and threshold level, can also affect the effectiveness of the ducking effect and should be carefully adjusted to achieve the desired result.

You can learn more about ducking technique at

https://brainly.com/question/30386129

#SPJ11

The first thing that should be done in this situation is (c) have him verify that the wireless card's hardware switch is in the On position.

Many laptops have a hardware switch or button that can be used to turn the wireless card on and off. If the switch is accidentally turned off, it can cause the wireless connection to stop working. Therefore, it's important to first verify that the hardware switch is in the correct position before attempting any other troubleshooting steps.

Once the hardware switch has been checked and verified to be in the On position, then other troubleshooting steps can be taken, such as checking the wireless driver or manually configuring the wireless card. However, it's important to start with the simplest and most common issue first, which in this case is checking the hardware switch.

Learn more about wireless: https://brainly.com/question/21286395

#SPJ11

A router entry can be placed in a routing table through static routing (manually configured), dynamic routing (learned from other routers), and default routing (for forwarding packets to a default gateway).

1. Directly Connected Networks: When a router interface is configured with an IP address and subnet mask, it automatically creates a route to that network in the routing table. This is known as a directly connected network route.

2. Static Routes: A network administrator can manually add a route to the routing table by configuring a static route. This is useful when there is no dynamic routing protocol available or when a specific route needs to be prioritized over other routes.

3. Dynamic Routing Protocols: A router can learn routes from other routers using dynamic routing protocols such as OSPF, BGP, or RIP. These protocols allow routers to share information about the networks they are connected to, and the best path to reach those networks is automatically determined and added to the routing table.

Learn more about routing https://brainly.com/question/30409461

#SPJ11

Let's break down the answer using the terms you mentioned:

The event handler in question is related to a web page being unloaded by the browser.

There are different event handlers that can be applied to a page, such as onload, onunload, onbeforeunload, and onbeforeload. The correct event handler for this scenario is the one that is triggered when the page is about to be unloaded.

The correct answer is "c. onbeforeunload" because the onbeforeunload event handler is applied to a page when it is about to be unloaded by the browser.

To learn more about event handler, visit:

https://brainly.com/question/29840785

#SPJ11

The "thetype" is a generic type parameter that would need to be replaced with the actual data type being used for the "item1" and "item2" variables.

To create a `studentids` object using the given code, you can follow these steps:

1. Define the `thetype` data type if it is not already defined. This can be any data type like `int`, `String`, `float`, etc.

2. Create a new instance of the `studentids` class by calling its constructor with two `thetype` values as arguments.

Here's an example using `int` as `thetype`:

```java
public class Main {
   public static void main(String[] args) {
       // Define thetype values
       int value1 = 10;
       int value2 = 20;

       // Create a studentids object
       studentids studentObj = new studentids(value1, value2);
   }
}

// Given code
class studentids {
   private int item1;
   private int item2;

   public studentids(int i1, int i2) {
       item1 = i1;
       item2 = i2;
   }
}
```

In this example, we create a new `studentids` object called `studentObj` by calling its constructor with two `int` values, `value1` and `value2`. The constructor initializes the private fields `item1` and `item2` with the provided values.

to learn more about String click here:

brainly.com/question/19651919

#SPJ11

NIDS (Network Intrusion Detection System) detects network-based attacks by analyzing network traffic for patterns and anomalies that indicate the presence of an intrusion or attack.

Signature-based detection: NIDS compares incoming traffic to a database of known attack signatures or patterns to detect and alert on any matches. This approach is effective for detecting known attacks, but may not detect new or evolving attacks that do not match existing signatures.Anomaly-based detection: NIDS establishes a baseline of what is considered normal behavior for network traffic and monitors for any deviations from that baseline. This approach is effective for detecting new or unknown attacks that do not match existing signatures, but can also generate false positives if normal network behavior changes.

To learn more about network click the link below:

brainly.com/question/31444077

#SPJ11