Answer:
grams H₂O produced = 8.7 grams
Explanation:
Given 2C₂H₆(g) + 7O₂(g) => 4CO₂(g) + 6H₂O(l)
7g 18g ?g
Plan => Convert gms to moles => determine Limiting reactant => solve for moles water => convert moles water to grams water
Moles Reactants
moles C₂H₆ = 7g/30g/mol = 0.233mol
moles O₂ = 18g/32g/mol = 0.563mol
Limiting Reactant => (Test for Limiting Reactant) Divide mole value by respective coefficient of balanced equation; the smaller number is the limiting reactant.
moles C₂H₆/2 = 0.233/2 = 0.12
moles O₂/7 = 0.08
Limiting Reactant is O₂
Moles and Grams of H₂O:
Use Limiting Reactant moles (not division value) to calculate moles of H₂O.
moles H₂O = 6/7(moles O₂) = 6/7(0.562) moles H₂O = 0.482 mole H₂O yield
grams H₂O = (0.482mol)(18g·mol⁻¹) = 8.7 grams H₂O
1. A balloon is inflated to a pressure of 2.55 atm at a temperature of 25 °C. What temperature
(in °C) is required to maintain the same volume if the pressure decreases to 1.39 atm?
Answer :
-111°C
Hope it helps
The final temperature of the gas in the balloon is equal to -110.6°C.
What is Gay Lussac's law?Gay-Lussac's law can be described as when the volume of the gas is kept constant then the pressure (P) is directly proportional to the absolute temperature (T in kelvin) of the gas.
The mathematical representation of Gay Lussca's law can be written as follows:
P/T = k
The pressure (P) of a gas is always directly proportional to the temperature (T) of the gas.
P ∝ T (where volume is constant)
[tex]\frac{P_1}{T_1} =\frac{P_2}{T_2}[/tex]
Where P₁, T₁, P₂, and T₂ are the initial and final pressure and temperature.
The initial temperature of the balloon, T₁ = 25 °C = 25 + 273 = 298 K
The initial pressure of the balloon, P₁ = 2.55 atm
The final pressure of the balloon, P₂ = 1.39 atm
Substituting temperatures and pressures of the gas in the balloon in the above equation:
2.55/298 = 1.39/T₂
T₂ = 162.4 K
T(K) = 273 + T(°C)
T(°C) = 162.4 - 273 = - 110.6°C
Therefore, the final temperature of the gas inside the balloon is -110.6°C.
Learn more about Gay Lussac's law, here:
brainly.com/question/11387781
#SPJ2
Changes in pressure can have a large effect on equilibrium systems containing gaseous components.
1. changing the concentration of gaseous components
2. adding an inert gas has no effect since the gas does not take part in the reaction, all partial pressures stay the same
3.changing the volume of the reaction vessel. This will cause a shift in the equilibrium position if the number of moles of gas is different on the reactant and product side (so Δn = n products - n reactants)
How would you change the volume for each of the following reactions to increase the yield of the product(s)?1. CaCO3(s) ⇋ CaO(s) + CO2(g) (increase, decrease, no change)2. S(s) + 3F2(g) ⇋ SF6(g) (increase, decrease, no change)3. Cl2(g) + I2(g) ⇋ 2ICl(g) (increase, decrease, no change)
Answer:
The correct option is 1, since by changing the partial pressures the gas pressures change, the gases go from the zones of higher partial pressure to the zones of lower partial pressure, an example of this is the homeostasis of the human pulmonary alveolus in gas exchange with CO2 and O2.
Explanation:
In the first it increases, in the second the volume is maintained, and in the third reaction it decreases.
Answer:
1. Increase volume.
2. No change.
3. No change.
Explanation:
Hello,
In this case, if we want to shift the reaction rightwards, based on the Le Chatelier's principle we would have to:
1. For this reaction:
[tex]CaCO_3(s) \rightleftharpoons CaO(s) + CO_2(g)[/tex]
- Increase the volume or decrease the pressure, since there are more gaseous moles at the products.
2. For this reaction:
[tex]S(s) + 3F_2(g) \rightleftharpoons SF_6(g)[/tex]
- Do nothing since it is not possible to achieve it as we have the same number of gaseous moles at both reactants and products.
3. For this reaction:
[tex]Cl_2(g) + I_2(g)\rightleftharpoons 2ICl(g)[/tex]
- Do nothing since it is not possible to achieve it as we have the same number of gaseous moles at both reactants and products.
Regards.
if a sample of gas at 25.2 c has a volume of 536mL at 637 torr, what will its volume be if the pressure is increased to 712 torr?
What is the name for s2o7
Answer:
Disulfate Ion {2-} Name: Disulfate Ion {2-} Formula: S2O7.
Explanation:
HOPE THIS HELPED :)
Answer:
Pyrosulfate
In chemistry, disulfate or pyrosulfate is the anion with the molecular formula S₂O²⁻₇. Disulfate is the IUPAC name. It has a dichromate-like structure and can be visualised as two corner-sharing SO₄ tetrahedra, with a bridging oxygen atom. In this anion, sulfur has an oxidation state of +6. Disulfate is the conjugate base of the hydrogen disulfate ion HS₂O⁻₇, which in turn is the conjugate base of disulfuric acid.
Explanation:
In chemistry, disulfate or pyrosulfate is the anion with the molecular formula S 2O2− 7. Disulfate is the IUPAC name. It has a dichromate -like structure and can be visualised as two corner-sharing SO 4 tetrahedra, with a bridging oxygen atom. In this anion, sulfur has an oxidation state of +6.
What did the periodic table help scientists discover?
A. Elements that are radioactive
O B. Elements that are harmful
C. Elements not yet known to exist
D. Elements that no longer exist
There are various kind of elements that are present in periodic table. Some elements are harmful, some are radioactive, some are noble gases. Option C is correct option.
What is periodic table?
Periodic table is a table in which we find elements with properties like metals, non metals, metalloids and radioactive element arranges in increasing atomic number.
Periodic table help a scientist to know what are the different types of elements are present in periodic table so that they can discover the new elements that are not being discovered yet.
Periodic table is the best platform to have a look to all elements at once that are arranged in columns and groups mentioning their valencies, electronegativity and Ionisation energy symbols. Thus the option c is correct option.
Learn more about periodic table , here:
https://brainly.com/question/11155928
#SPJ5
Wine goes bad soon after opening because the ethanol CH3CH2OH dissolved in it reacts with oxygen O2 gas to form water and aqueous acetic acid CH3COOH, the main ingredient in vinegar. Calculate the moles of ethanol needed to produce 0.095mol of water. Be sure your answer has a unit symbol, if necessary, and round it to 2 significant digits.
Answer:
We need 0.095 moles of ethanol
Explanation:
Step 1: Data given
Number of moles water = 0.095 moles
Step 2: The balanced equation
CH3CH2OH + O2 ⇒ H2O + CH3COOH
Step 3: Calculate moles of ethanol
For 1 mol ethanol we need 1 mol oxygen to produce 1 mol water and 1 mol acetic acid
For 0.095 moles water, we need 0.095 moles ethanol and 0.095 moles oxygen
We need 0.095 moles of ethanol
Question 13: Consider the strength of the Hβ absorption line in the spectra of stars of various surface temperatures. This is the amount of light that is missing from the spectra because Hydrogen electrons have absorbed the photons and jumped from level 2 to level 4. How do you think the strength of Hβ absorption varies with stellar surface temperature?
Answer:
The absorption and strength of the H-beta lines change with the temperature of the stellar surface, and because of this, one can find the temperature of the star from their absorption lines and strength. To better comprehend, let us look into the concept of the atom's atomic structure.
Atoms possess distinct energy levels and these levels of energy are constant, that is, the temperature has no influence on it. However, temperature possesses an influence on the electron numbers found within these levels of energy. Therefore, to generate an absorption line of hydrogen in the electromagnetic spectrum's visible band, the electrons are required to be present in the second energy level, that is when it captivates a photon.
Therefore, after captivating the photons the electrons jump from level 2 to level 4, which shows that there is an increase in the stellar surface temperature and at the same time one can witness a decline in the strength of the H-beta lines. In case, if the temperature of the surface increases too much, then one will witness no attachment of electron with the hydrogen atom and thus no H lines, and if the temperature of the surface becomes too low, then the electrons will stay in the ground state and no formation of H lines will take place in that condition too.
Hence, to generate a very robust H line, after captivating photons the majority of the electrons are required to stay in the second energy level.
Which statements describe inorganic compounds? Check all that apply
Inorganic compounds contain carbon
Inorganic compounds usually lack carbon
Inorganic compounds are not associated with or made from living things,
Inorganic compounds include fruits and vegetables,
Inorganic compounds include salt and water
Answer:
b, c, e
Explanation:
Inorganic compounds usually lack carbon.
Inorganic compounds are not associated with or made from living things.
Inorganic compounds include salt and water.
Answer:
yes the answer id bce
Explanation:
Please help!!! Will give BRAINLIEST to right answer!!
Answer:
Explanation:
∆H positive means heat is required or absorbed -- endothermic
∆H negative means heat is produced or removed -- exothermic
A loud classroom demonstration involves igniting a hydrogen-filled balloon. The hydrogen within the balloon reacts explosively with oxygen in the air to form water. If the balloon is filled with a mixture of hydrogen and oxygen, the explosion is even louder than if the balloon is only filled with hydrogen. The intensity of the explosion depends on the relative amounts of oxygen and hydrogen within the balloon. Look below at the molecular views representing different amounts of hydrogen and oxygen in four different balloons. Based on the balanced chemical equation, which balloon will make the LOUDEST explosion and why?
Answer:
See explaination
Explanation:
When ignited, hydrogen gas combines with oxygen gas explosively in proportions ranging from 4.1 - 71.5% hydrogen - ignition temperature is 580 °C. The gaseous reaction is
2 H2(g) + O2(g) → 2 H2O(g)
This exothermic reaction yields 232 kJ/mol of water formed. The rapid release of a considerable amount of energy causes the surrounding air to expand suddenly, resulting in a sharp expolsion. When pure hydrogen is ignited, the reaction with the surrounding air is less rapid, the sound is less loud, and a significantly larger flame is produced.
The amount of water produced directly influences the amount of heat produced and the amount of energy released. If the two gases are in the correct ratio of 1 oxygen to 2 hydrogen we get the loudest sound as the maximum amount of water is produced for the same volume of the balloon.
For any ration away from 1 oxygen to 2 hydrogen by volume and mole we will get a less louder sound. The farther we are away from this ratio the lesser amount of water is formed and thus lesser heat released and lesser sound.
To demonstrate let us take 4 balloons
Balloon A 1: 2 oxygen to hydrogen
Baloon B 1.2 : 1.8 oxygen and hydrogen
Balloon C 1:1 oxygen to hydrogen
Balloon D 2:1 oxygen to hydrogen
So we will see A is the loudest followed by B, C and least loud is D.
Each of the the 11 body systems:
A) Are interchangeable
B) Depends on others to function
C) Performs a single task
D) Is controlled by the lungs
Answer:
Depends on others to function
Explanation:
What is the correct IUPAC name for Ag₂S?
Answer:
Acanthite. MFCD00003406
Explanation:
A characteristic that describe a plant that can make its own food is
Answer:
Photosynthesis
this is correct
What do all of the organ systems in a human form?
A,the organism
B.the cells
C.the tissue
D.the organs
Answer:
A
Explanation:
Cells form tissues
Tissues form organs
Organs for organ systems
Organ systems form organism
Answer:
A the organism
Explanation:
Cause every answer is what is in a human form but the organism is what is made up of all of them
It takes 300 N to move a box 10 meters in 10 seconds. How much power is
required?
A. 30,000 W
B. 100 W
C. 3,000 J
D. 300 W
Plz help
Answer:
Power, P = 300 W
Explanation:
We have,
Force acting on the box to take it is 300 N
It is moved to a distance of 10 m in 10 seconds
It is required to find the power required to move the box. The rate at which work is done is called power required by an object. It can be given by the formula as follows :
[tex]P=\dfrac{W}{t}\\\\P=\dfrac{Fd}{t}\\\\P=\dfrac{300\times 10}{10}\\\\P=300\ W[/tex]
So, the power required is 300 W.
Question 1 of 10
2 Points
An engineering team is conducting a wind tunnel test to examine the
aerodynamics of a car it has designed. Which part of the engineering process
is the team in?
O A. Do the work.
O B. Evaluate the results.
O C. Improve and redesign.
D. Identify a need.
SUBMIT
Explanation:
Evaluate the results, letter B
If you start with 6 mol of nitrogen gas (N2+) what mass (g) of ammonia (NH4) will be produced?
Answer:
204g of NH3
Explanation:
The balanced equation for the reaction is given below:
N2 + 3H2 —> 2NH3
Next, we shall determine the number of mole NH3 produced by reacting 6moles of N2. This is illustrated below:
From the balanced equation above,
1 mole of N2 reacted to produce 2 moles of NH3.
Therefore, 6 moles of N2 will react to produce = 6 x 2 = 12 moles of NH3.
Finally, we shall convert 12 moles of NH3 to grams. This is illustrated below:
Number of mole of NH3 = 12 moles.
Molar mass of NH3 = 14 + (3x1) = 17g/mol
Mass of NH3 =..?
Mass = mole x molar mass
Mass of NH3 = 12 x 17
Mass of NH3 = 204g.
Therefore, 204g of NH3 will be produced from the reaction.
Which of the following will increase the boiling point of water?
Adding more water
Adding sugar
Removing some of the water
None of the above
Answer:
Explanation:
Adding sugar
Write and balance the double replacement reaction between barium sulfate and titanium (II) oxide.
Answer:
BaSO4(aq) + TiO(aq) —> BaO(aq) + TiSO4(aq)
Explanation
The equation for the reaction between barium sulfate and titanium (II) oxide is given below:
BaSO4 + TiO —>
In solution, the reactants will dissociates as follow:
BaSO4(aq) —> Ba^2+(aq) + SO4^2-(aq)
TiO(aq) —> Ti^2+(aq) + O^2-(aq)
The double displacement reaction will occur as follow:
Ba^2+(aq) + SO4^2-(aq) + Ti^2+(aq) + O^2-(aq) —> Ba^2+O^2-(aq) + Ti^2+SO4^2-(aq)
We can see that a double displacement reaction occurred as there is a double exchange of ions in the solution. The elemental equation is given below:
BaSO4(aq) + TiO(aq) —> BaO(aq) + TiSO4(aq)
Help Ill give you the brainiest answer thing please just give me the right answer
Answer:
the 3rd one
Explanation:
The largest contributed to water pollution is
Answer:
this si from google hope it helps
Explanation:
The Main Causes of Water Pollution in the U.S.
Runoff from Agricultural Operations. Agriculture represents one of the biggest sources of water pollution in the country. ...
Runoff and Nonpoint Source Pollution. ...
Industrial Activities. ...
Leakage from Underground Storage and Piping. ...
Leaking Sewers. ...
Vehicle Emissions. ...
Landfill Leakage. ...
Hazardous Waste.
Answer:
Runoff and Non-point Source Pollution.
Explanation:
it's caused by rainfall or snow-melt moving over and through the ground. As the runoff moves, it picks up and carries away natural and human-made pollutants, finally depositing them into lakes, rivers, wetlands, coastal waters and ground and NPS is it's abbreviation.
During El Niño years, why is Christchurch, New Zealand’s temperature cooler than usual?
Choose the claim that is most similar to your idea. Your response does not need to be the same as your partner's.
This is why Christchurch, New Zealand’s air temperature is cooler than usual during El Niño years:
Claim 1: The amount of incoming energy from the sun changes.
Claim 2: Something about Earth’s surface (land or water) changes.
Claim 3: Something about the air changes.
Please get back to me quick, due in an hour. First to answer will be named brainliest! HELPP
Answer:
It's probably claim 3
Explanation:
It's not claim 1 because the amount of energy from the sun can't change and claim 2 doesn't really make sense.
Scoring: Your score will be based on the number of correct matches minus the number of incorrect matches. There is no penalty for missing matches. Use the References to access important values if needed for this question. Indicate whether each of the following compounds will gave an acidic, basic or neutral solution when dissolved in water.
1. ammonium bromide
2. potassium cyanide
3. sodium chloride
4. potassium iodide
Answer:
Explanation:
1 ) Ammonium bromide is a salt of ammonium hydroxide and hydrogen bromide . The former is a weak base and the later is a strong acid so the salt will make acidic solution in water. It happens due to salt hydrolysis.
2 ) Potassium cyanide is salt of potassium hydroxide and hydrogen cyanide . The former is strong base and the later is weak acid so its salt will be basic in nature .
3 ) sodium chloride is a salt of sodium hydroxide and hydrogen chloride . The former is strong base and later is strong acid. So the salt is neutral .
4 ) Potassium iodide is a salt of potassium hydroxide and hydrogen iodide . The former is a strong base and the later is a strong acid . So the salt is neutral or a bit basic.
0.5 moles of CO2 have a volume of 50 L and a pressure of 0.8210 atm. What must be the temperature of the gas?
Answer:
1000 K
Explanation:
Given data
Moles of carbon dioxide (n): 0.5 molesVolume of carbon dioxide (V): 50 litersPressure of carbon dioxide (P): 0.8210 atmospheresTemperature of carbon dioxide (T): ?We can find the temperature of carbon dioxide using the ideal gas equation.
[tex]P \times V = n \times R \times T\\T = \frac{P \times V}{n \times R} = \frac{0.8210atm \times 50L}{0.5mol \times \frac{0.08206atm.L}{mol.K} }=1000 K[/tex]
The temperature of the gas is 1000 K.
Two atoms of the same element
Answer:
Isotope
Explanation:
Complex ions with different ligands have different colors because the ligands: Group of answer choices are different colors affect the energy levels of the lone-pair electrons on the metal have different energies for their bonding electrons affect the energy levels of the metal d orbitals have different energies for their lone-pair electrons
Answer:
The correct answer is the second last statement, that is, it affects the energy levels of the metal d orbitals.
Explanation:
It is because of the d-d transition of electrons that the metal complexes exhibit color. When bonding of the ligands takes place with the transition metal ion, a repulsion results between the electrons in the d orbitals of the metal ion and the electrons found within the ligands. This increases the d orbitals' energy level.
However, based on the alignment of the d orbitals in the space, all of the energies do not get elevated by the same level, it gets dissociate into two groups. This dissociation of the d-orbitals relies upon the ligand's strength. More amount of energy would be required to encourage an electron from the lower orbitals groups to the move towards the higher ones in case if the splitting is more.
Greater energy is equivalent to shorter wavelengths in terms of the color of the light absorbed. The complex ions possessing different ligands show distinct kinds of colors as the energy levels of the d orbitals of the metal get affected by the ligands.
g A chemistry student needs of thiophene for an experiment. She has available of a w/w solution of thiophene in benzene. Calculate the mass of solution the student should use. If there's not enough solution, press the "No solution" button. Round your answer to significant digits.
The given question is not complete, the complete question is:
A chemistry student needs 5.00 g of thiophene for an experiment. She has available 0.50 kg of a 28.7% w/w solution of thiophene in benzene, Calculate the mass of solution the student should use. If there's not enough solution, press the "No solution" button Be sure your answer has the correct number of significant digits. X
Answer:
The correct answer is 17.4 grams.
Explanation:
As mentioned in the given question, 28.7 percent w/w solution thiophene in benzene shows that,
(wt. of thiophene / wt. of thiopene + benzene) * 100 = 28.7
0.50 kg of the solution indicates that it is 500 grams of the solution.
Therefore, the amount of thiophene found in the 500 grams of the solution is,
500 g * 28.7 / 100 = 143.5 gm
Thus, 143.5 grams of thiophene is found 500 grams of the solution.
Now, 1 gram of thiophene will be in 500/143.5 of solution.
Therefore, 5 grams of thiophene will be in 500/143.5 * 5 g of the solution = 17.42 grams of the solution.
Hence, the mass of the solution to be used by the student in the given case will be 17.4 grams.
Identifying the Body's Responses to
Quick
Check
Which type of response identifies a specific pathogen in the body?
A(n)
response
Answer:
Specific Immune Response
Explanation:
A specific immune response identifies the pathogen which then allows it to produce antibodies that protect against that SPECIFIC pathogen.
Answer:
immuneExplanation:
What amount of heat will raise the temperature of 78g liquid water from 20 C to 80 C?
Answer:
19656J
Explanation:
Step 1:
Data obtained from the question.
Mass (M) = 78g
Initial temperature (T1) = 20°C
Final temperature (T2) = 80°C
Change in temperature (ΔT) = T2 – T1 =
80°C – 20°C = 60°C
Specific heat capacity (C) = 4.2J/g°C
Heat (Q) =...?
Step 2:
Determination of the heat required for the reaction.
Q = MCΔT
Q = 78 x 4.2 x 60
Q = 19656J
Therefore, 19656J of heat is required.
When a chemical reaction releases energy it is called what
When a chemical reaction releases energy it is called Exothermic Reaction.
hope it helps!
When a chemical reaction energy releases then this type of reaction is called exothermic reaction. In this reaction energy is release to the atmosphere.
What is exothermic reaction?In chemistry there are various type of reaction out of which the two main types are the exothermic reaction and endothermic reaction.
Exothermic reaction is the one in which energy releases in form of heat respiration reaction is an example of exothermic reaction. In respiration food that we eat are broken down in glucose with release of energy.
Endothermic reaction is the one in which energy is taken out during the reaction. Photosynthesis is an example of endothermic reaction where sunlight energy is taken by the plants to make food.
Thus when a chemical reaction releases energy these reactions are called exothermic reaction.
To learn more about exothermic reaction, here:
https://brainly.com/question/13014923
#SPJ2
