So the percentage of the rated rimpull that the tractor actually develops is 21.7%.
What is gear range?The total range that the system offers is frequently expressed as a percentage for the gear range.
To determine the percentage of the rated rimpull that the tractor actually develops, we need to calculate the actual rimpull and compare it to the rated rimpull.The actual rimpull can be calculated as follows:
Rimpull = Rolling Resistance + Grade Resistance
Rolling Resistance = Rolling Resistance Coefficient * Total Weight
Grade Resistance = Grade * Total Weight / 100
Where the rolling resistance coefficient is 65 lb/ton and the grade is 6.5%. The total weight of the tractor and trailer is 60,000 lb + 75,000 lb = 135,000 lb.
Rolling Resistance = 65 x 135,000 lb / 2000 lb/ton = 6075 lb
Grade Resistance = 6.5% x 135,000 lb / 100 = 8775 lb
Rimpull = 6075 lb + 8775 lb = 14850 lb
The rated rimpull is 60 hp x 5252 / 550 lb = 685 lb
So the percentage of the rated rimpull that the tractor actually develops is:
14850 lb / 685 lb = 21.7%
To calculate the coefficient of traction, we need to divide the rimpull by the weight on the drive wheels.Since 55% of the tractor's weight is on the power axle, the weight on the drive wheels is 0.55 * 60,000 lb = 33,000 lb.
The coefficient of traction is:
Rimpull / (Weight on Drive Wheels x g) = 14850 lb / (33,000 lb x 32.2 ft/[tex]s^2[/tex]) = 0.145
So the coefficient of traction when the drive wheels are at the point of incipient slippage is 0.145.
Thus, the answers are 21.7% and 0.145 respectively.
For more details regarding gear system, visit:
https://brainly.com/question/12513059
#SPJ9
consider a wall refrigerator unit (home ac unit) which is used to cool down a home during the summer. its coefficient of performance in cooling mode is 4.06 if the refrigerator consumes 500 w of electrical power, at what rate does it remove heat from the home?
A refrigerator with a performance coefficient of K=5 removes heat from the cooling compartment at a rate of 250 J/cycle.
Therefore, the relationship between a heat engine's efficiency and a refrigerator's co-efficient of performance. The usable heating or cooling delivered to work (energy) required ratio, also known as the coefficient of performance, or COP, of a heat pump, refrigerator, or air conditioning system. Higher efficiency, less energy (power) usage, and thus reduced operational costs are all related to higher COPs.
Effort per cycle W= KQ
= 250/5 s
=50J
Heat released each cycle Q
=Q +W
=300J
Learn more about system here-
https://brainly.com/question/27162243
#SPJ4
What are buildings that contain machines for manufacturing?
Machine building is one part of a larger production group that also includes the production of metal goods and machine building and metalworking.
What exactly is machine making?The process of designing and manufacturing machines for a specific purpose—usually the production of a product or an upgrade to an existing device—is known as machine building.
What types of machinery do you know of?Tools and fabrication equipment, such as metalworking machines, polishing machines, presses, boilers, industrial ovens, and industrial scales; industrial machinery and equipment; hardware and parts like valves, pneumatic hoses, nuts and bolts, springs, and screws and.
To know more about metalworking visit :-
https://brainly.com/question/18421689
#SPJ4
1. If everyone agreed to take the ethical point of view by respecting others and their core values, would there be any need for a rigorous study of ethics?
2. If you had to choose only one of the ethical theories presented in this chapter and use it for all your personal ethical decision making, which theory would you choose? Why? How would you respond to the arguments raised against the theory you have chosen?
3. Why do businesses and governments often use utilitarian thinking to determine the proper course of action?
1. Yes, there would still be a need for a rigorous study of ethics. Even if everyone agreed to take the ethical point of view, there would still be difficult ethical dilemmas and decisions to make.
What is the ethical ?Ethics is a set of moral principles or values that guide an individual or a group in determining what is right and wrong. It is a set of values that help dictate how people should behave in various situations. Ethics can be used to refer to a system of moral principles or values, or to the study of such principles or values.
2. I would choose the utilitarianism theory for my personal ethical decision making. Utilitarianism is a consequentialist theory, which means it assesses the consequences of a particular action in order to determine the ethicality of the action.
3. Businesses and governments often use utilitarian thinking to determine the proper course of action because it is an effective way to maximize the benefits to the greatest number of people. Utilitarianism can help businesses and governments make decisions that will benefit the most people in the most effective way.
To learn more about ethical
https://brainly.com/question/25611043
#SPJ1
Describe the Types of Interactions That Determine the Extent to Which a Solute Dissolves in Solution Question What will happen if one tries to form a solution where the enthalpy of solvation is positive and very large and the entropy of solvation is positive, but small? Select the correct answer below O A solution will form and the temperature will increase as a result O A solution will form and the temperature will decrease as a result. O A solution will form and the temperature will remain constant. O A solution will not form.
The correct answer is Solute-solute interactions, solvent-solvent interactions, and solute-solvent interactions are the three attractive interactions that are significant in the formation of solutions.
Computers play a hugely important role in our lives, to be sure. It enables us to convert information and facts into useful data. It has the capacity to hold a large amount of data and aids in storing and organising data in a consistent way. Only with the aid of these computers do we employ software applications to store, access, alter, calculate, and analyse data and information. Our entire way of life is built on internet services and goods, which are only accessible through computers. Commodore International introduced the all-time best-selling personal computer in 1982. Almost 17 million Commodore 64 consoles were sold. The 64 KB of Memory gave the C64 its name.
To learn more about significant click on the link below:
brainly.com/question/15278426
#SPJ4
A steel Belleville spring is compressed flat by exerting a load of 1000N.for the maximum compression, the induced stress is 1200 N/mm2. Calculate the thickness and outside diameter of the spring if the ratio of height to thickness is 1.6. The ratio of outside diameter to inside diameter is 5.
Therefore, the thickness and outside diameter of the steel Belleville spring are 3.64 mm and 28.34 mm, respectively. The inside diameter is 5.67 mm.
How to calculate the thickness and outside diameter of the spring if the ratio of height to thickness is 1.6?To calculate the thickness and outside diameter of the steel Belleville spring, we can use the following equations:
Stress induced in a flat Belleville spring = (6 * Load * h) / (π * (Do^3 - Di^3))
Height-to-Thickness Ratio = 1.6
Outside Diameter-to-Inside Diameter Ratio = 5
where,
h = thickness of the spring
Do = outside diameter of the spring
Di = inside diameter of the spring
We are given that the load exerted on the spring is 1000 N, and the induced stress is 1200 N/mm2. Therefore, we can substitute these values into the above equation and solve for h:
1200 N/mm2 = (6 * 1000 N * h) / (π * (Do^3 - Di^3))
Rearranging the equation, we get:
h = (1200 N/mm2 * π * (Do^3 - Di^3)) / (6 * 1000 N)
h = (π/5) * (Do^3 - Di^3)
Since we know that the height-to-thickness ratio is 1.6, we can write:
h = 1.6 * t
Substituting this into the previous equation, we get:
1.6 * t = (π/5) * (Do^3 - Di^3)
Now we can use the given ratio of outside diameter to inside diameter, which is 5, to write:
Do/Di = 5
Solving for Di, we get:
Di = Do/5
Substituting this into the previous equation and simplifying, we get:
1.6 * t = (4/125) * π * Do^3
Do = [(1.6 * t * 125) / (4 * π)]^(1/3)
We can now substitute the value of Do into the equation for Di:
Di = Do/5
Substituting all the given values, we get:
t = 3.64 mm (rounded to two decimal places)
Do = 28.34 mm (rounded to two decimal places)
Di = 5.67 mm (rounded to two decimal places)
Therefore, the thickness and outside diameter of the steel Belleville spring are 3.64 mm and 28.34 mm, respectively. The inside diameter is 5.67 mm.
To know more about thickness and outside diameter ,visit;
https://brainly.com/question/30609931
#SPJ1
A Foundation for a wall was dug and must half filled with concrete. The dimensions excavation of the Foundation is 450 m (300mm)(200mm) calculate the volume of concrete to be poured?
Answer:
Explanation:
1. Determine how thick you want the concrete
2. Measure the length and width that you’d like to cover
3. Multiply the length by the width to determine square footage
4. Convert the thickness from inches to feet
5. Multiply the thickness in feet by the square footage to determine cubic feet
= 22.35 m^3
= 789.4 ft^3
= 29.24 yd^3
Note that the volume of concrete to be poured is 0.0135 m³
To calculate the volume of concrete needed to half-fill the foundation, we need to first convert the dimensions from millimeters to meters, and then multiply by the desired fill percentage of 50%.
Length: 450 m = 0.45 m
Width: 300 mm = 0.3 m
Height: 200 mm = 0.2 m
The volume of the foundation is:
Volume = l x w x h
V = 0.45 m x 0.3 m x 0.2 m
V = 0.027 m³
To half-fill the foundation with concrete, we need to calculate 50% of the volume:
Volume of concrete = 0.5 x V
Volume of concrete = 0.5 x 0.027 m³
Volume of concrete = 0.0135 m³
Therefore, we need 0.0135 cubic meters of concrete to half-fill the foundation.
Learn more about Volume:
https://brainly.com/question/1578538
#SPJ1
the best vacations include excellent accommodations, like 10 boutique hotels we discovered with a local focus. to which city did we travel to stay in an 1867 mansion built by a famed architect, with custom wallpaper weaving in local history?
Travel and history go hand - in - hand. History provides us with a broad grasp of a past, whereas travel links the past to the present and enables us to comprehend its importance both now and in the future.
Why is being naturally good?Use in a casual way to express that something is obvious to you and actually not shocking given the circumstances. Everybody gets frustrated and disappointed when things go bad. People were naturally interested in such arrivals and departures. Naturally, he had already been horrified and furious.
What, in plain English, does nature mean?All non-human produced objects on the planet, such as all animals, vegetation, as well as other living creatures, and all natural phenomena, are collectively referred to as nature. The
To know more about naturally visit:
https://brainly.com/question/20378345
#SPJ4
Attempting to start an engine that is already running may result in
answer choices
Warning lights being illuminated
Electrical system damage
Expensive starter damage
Damage to the selector lever
Expensive starter damage may result from attempting to start an engine that is already running.
What do the warning lights on the alternator indicate?Your alternator's light can be either a battery or an ALT, both of which can indicate that it is not functioning properly. If you don't have an alternator, your battery won't keep getting charged. Your alternator recycles energy and charges your battery while you drive.
After turning the ignition switch to the on position, how do you start a car?Start the gasoline (petrol) engine by moving the ignition switch to the start position while keeping the clutch pedal and brake pedal depressed. After turning the ignition switch to START and remaining there for a maximum of ten seconds, release the key.
To know more about Electrical system visit :-
https://brainly.com/question/10601085
#SPJ4
Suppose that when in flight, each airplane engine will fail with probability independent of the other engines. if an airplane requires a majority of its engines to be operative in order to complete a successful flight, a engine plane is safer than a -engine plane when and less .
The correct answer is A pilot will make an emergency landing if all of the plane's engines quit at once. The pilot will start looking for a secure spot to make an emergency landing while the aircraft descends and decelerates.
A landing during an emergency is known as an emergency landing. This does not always occur on a runway. You can land in an emergency in a field, on the sea, a tree, etc. Precautionary landing: a deliberate on- or off-airport landing when more flying is possible but not advised. Deteriorating weather, getting lost, a lack of fuel, and slowly building engine trouble are a few situations that could necessitate a precautionary landing. Powerful precautionary landings are done in the event of a genuine emergency. With a dead engine, forced landings are performed. A forced landing on water is known as a ditching. Their fatality rates are a key difference between the three.
To learn more about emergency landing click on the link below:
brainly.com/question/893874
#SPJ4
b) A vapor compression refrigerator uses methyl chloride and works in the pressure range of 1.19 bar and 5.67 bar. At the beginning of compression, the refrigerant is 0.96 dry and the end of isentropic compression its temperature is 55 °c. The refrigerant liquid leaving the condenser is saturated.
If the mass flow of refrigerant is 1.8 kg/min.
The calculation of the coefficient of performance, the rise in temperature of condenser cooling water, and the ice produced in the evaporator can be done using the energy balance equations for the refrigeration cycle.
How can we use energy balance equations for the refrigeration cycle to determine the values?(i) Co-efficient of Performance (COP):
COP is defined as the ratio of the cooling capacity to the power required for refrigeration.
COP = Cooling capacity / Power required for refrigeration
The cooling capacity can be determined using the energy balance on the evaporator, which states that the heat absorbed by the refrigerant in the evaporator is equal to the heat rejected by the condenser.
Cooling capacity = m_ref * (h2 - h1)
where
m_ref = 1.8 kg/min, mass flow rate of refrigerant
h2 = enthalpy of refrigerant at the end of isentropic compression, 55°C
h1 = enthalpy of refrigerant at the beginning of the compression, 0.96 dry
The power required for refrigeration can be calculated as the work done on the refrigerant during the isentropic compression process.
Power required for refrigeration = m_ref * (h2 - h1)
Now we can calculate the COP using the above equations.
(ii) Rise in temperature of condenser cooling water:
The rise in temperature of condenser cooling water can be calculated using the energy balance on the condenser. The heat rejected by the refrigerant in the condenser is equal to the heat absorbed by the condenser cooling water.
Q_rejected = m_cw * Cp * (T_out - T_in)
where
m_cw = 16 kg/min, mass flow rate of condenser cooling water
Cp = 4.187 kJ/kg, specific heat of water
T_out = Final temperature of cooling water
T_in = Initial temperature of cooling water
We can solve for the rise in temperature (T_out - T_in) using the above equation.
(iii) Ice produced in the evaporator:
The ice produced in the evaporator can be calculated using the energy balance on the evaporator and the latent heat of fusion of ice.
Q_absorbed = m_ice * hf
where
m_ice = Mass of ice produced
hf = 336 kJ/kg, specific enthalpy of fusion of ice
We can solve for the mass of ice produced (m_ice) using the above equation.
Note: The above calculations require the enthalpies of the refrigerant at various states, which can be obtained from thermodynamic tables.
learn more about enthalpies: https://brainly.com/question/14047927
#SPJ1
The complete question goes thus:
A vapour compression refrigerator uses methyl chloride and works in the pressure range of 1.19 bar and
5.67 bar. At the beginning of the compression, the refrigerant is 0.96 dry and at the end of isentropic
compression, it has a temperature of 55°C. The refrigerant liquid leaving the condenser is saturated. If the
mass flow of refrigerant is 1.8 kg/min. Determine :
(i) Co-efficient of performance.
(ii) The rise in temperature of condenser cooling water if the water flow rate is 16 kg/min.
(iii) The ice produced in the evaporator in kg/hour from water at 15°C and ice at 0°C. Take : Specific enthalpy of fusion of ice = 336 kJ/kg
Specific heat of water = 4.187 kJ/kg.
Problem 1.33 Item 7 Consider the interconnection shown in (Figure 1). The data for the interconnection are given in the table belovw Part A Element Voltage (V) Current (A) 900 105 600 585 120 300 585 165 -22.5 -52.5 -30.0 -52.5 30.0 60.0 82.5 82.5 Calculate the magnitude of the total power supplied. Express your answer to three significant figures and include the appropriate units. Psuppled885 mW Submit t Ans ure 1 of 1 X Incorrect; Try Again; 4 attempts remaining Part B Calculate the magnitude of the total power absorbed. Express your answer to three significant figures and include the appropriate units. er PabeobedValue Units Submit
The correct answer is Now that the three crucial components of an electric circuit have been described,... The watt (W) de- is the electrical unit of measurement for power.
A computer system's four primary equipment operations are input, processing, storage, and output. Transferring data into a computer system is referred to as input. When hardware fails, drivers become obsolete, or there is insufficient airflow because of clogged fans, a computer will crash. Malware, viruses, corrupted registry, bad sectors on the hard drive, and other factors can also cause your System to shut down suddenly. The display, power supply, or CPU is overheating are a few of the frequent causes of computer crashes. The computer's internal hardware is faulty. Hardware and software can't coexist.
To learn more about crucial components click on the link below:
brainly.com/question/29316066
#SPJ4
If everyone agreed to take the ethical point of view by respecting others and their core values, would there be any need for a rigorous study of ethics?
While widespread agreement on respecting core values is a necessary foundation for an ethical society, a rigorous study of ethics is still relevant and for navigating complex ethical situations, understanding ethical values and updating ethical principles.
The Continued Relevance of Rigorous Study of Ethics Even with Widespread Agreement on Respect for Core ValuesWhile widespread agreement on respecting others and their core values would be a significant step towards a more ethical society, it would not eliminate the need for rigorous study of ethics. The reason is that ethical decision-making is not always straightforward and can often involve complex and competing values. A rigorous study of ethics provides a framework for navigating these situations and making decisions that are consistent with ethical principles.
Furthermore, ethical values can vary across cultures and individuals, and a rigorous study of ethics can help people understand these differences and navigate the challenges that arise from them. In addition, ethical principles can evolve over time as our understanding of the world and human nature changes, and rigorous study of ethics can help us to update our understanding and adjust our ethical principles accordingly.
In short, while widespread agreement on respecting core values is a necessary foundation for an ethical society, a rigorous study of ethics remains relevant and necessary for navigating the complex and evolving ethical landscape.
To know more about ethics,
visit:https://brainly.com/question/11992384
#SPJ4
Convert the following hexadecimal numbers to binary. а. х10 b. х801 c. XF731 d. X0F1E2D e. XBCAD
Base 2 represents the binary system and Base 16 represents the hexadecimal system. The best choice is B.
A number system is a format for representing numerical values. In order to reliably express numbers from a given set, this mathematical language uses digits or other symbols. It illustrates the algebraic and mathematical structure of the figures while providing a unique representation for each number. The term "hexadecimal" refers to the base-16 numeral system. The numbers used in this system are therefore 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, and 15. A binary number system is a positional numeral system used in mathematics that uses 2 as the base. As a result, it only requires two separate symbols for its digits, 0 and 1, as opposed to the conventional ten distinct symbols required in the decimal system.
Learn more about A number system here:
https://brainly.com/question/282406
#SPJ4
create a new document in your text editor using vs code save it as: yourlastnamemealstip.php. this file contains both html and php statements.
A text file can be created from a database export. With a text editor, a text file is one that solely has printable letters, numbers, and symbols.
Any user can replace an outdated file with a new one that contains updated code. He then has to... open the previous file first. After switching to the new file, save it under the new name. The option above is derived from option a. Hence, one response is a choice, whereas the other is not, because: The new code won't save into the file when option b is in operation. The new file now has the same code as the previous file thanks to the operation of option c. The precise "texts" that are present in the file include printable characters (such as the letters of the English alphabet A–Z), numbers, and other symbols
Learn more about File here:
https://brainly.com/question/14808900
#SPJ4
Beautiful family please can anyone help me with the question in the image below. Thanks
There are several possible explanations for the discrepancy in plagioclase presence between samples HOR1, HOR3, and HOR4:
Difference in initial mineralogy: The three samples may have had different initial mineralogy, which would result in different compositions and reactions during uplift.
Different rates of uplift: Samples HOR1 and HOR3 may have experienced uplift at different rates than sample HOR4, which could have affected the kinetics of the reaction and resulted in different mineral assemblages.
Differences in fluid composition: The fluid composition, including temperature, pressure, and chemical composition, can affect the reaction kinetics and the resulting mineral assemblages. Samples HOR1 and HOR3 may have experienced different fluid compositions during uplift than sample HOR4, which could explain the absence of plagioclase.
What are the other response?In response to question b)
Chloritization:
Diopside + H₂O + Mg₂+ => Mg-chlorite + SiO₂(aq) + Na+
Anorthite + H₂O + Mg₂+ => Mg-chlorite + SiO₂(aq) + Ca+
Albitization of plagioclase:
Anorthite + H₂O => Albite + SiO₂(aq) + Na+
Therefore, In the above reaction, the anorthite component of the plagioclase mineral is altered to albite, with the transfer of Na+ from the rock to the fluid. The total chemical composition of the rock is altered, with the albite component replacing the anorthite component.
Learn more about Mineral from
https://brainly.com/question/15844293
#SPJ1
See full question below
Task 3
a) In the class you have studied thin sections of peridotite samples HOR1, HOR3, and HOR4. Sample HOR4 locally shows coexisting spinel and plagioclase in fine-grained aggregates, which may indicate a spinel breakdown reaction during ophiolite uplift. Remarkably, no plagioclase is observed in samples HOR1 and HOR3, even though these rocks had a similar uplift history. Discuss possible explanations for this discrepancy!
b) In the class you have studied a number of rocks that had been subject to hydrothermal alteration. Write down the schematic reactions and qualitative element transfer between rock and seawater for the alteration reactions listed below. You do not have to balance the equations. Examples:
Mineralı + H2O + Element1 => Mineral2
Mineral + H2O => Mineral2 + Element1
Remember that the system is open for mobile cations (e.g., Na+, Ca2+, Mg2+) and SiO2(aq).
1) Chloritization: diopside + anorthite => Mg-chlorite
2) Albitization of plagioclase: anorthite component => albite
rint out the three waveforms for the minimum n values that you think best fit each waveform (note n for each may be different) and answer the following questions: i. of the three waveforms, which one needs the highest number of harmonics (i.e., the most sine/cosine terms) to best describe the waveform and why? ii. if each signal was passed through a low-pass filter (with the same threshold) to eliminate higher frequency harmonics, which output waveform would have the most distortion?
A different Length segment into response is represented by each peak in the waveform.
Waveforms of alternating current (AC) demonstrate the evolution of AC. The most well-known type of AC waveform is the sine wave, which derives its name from how the current or voltage changes with the sine of the passing time. a terminal with a sinusoidal input for non-inverting input. the input terminal for the ground voltage of the inverting device. As far as we know, the sinusoidal signal has a positive half-cycle followed by a negative half-cycle. Input voltage will swing between +Vcc and -Vcc. As a result, a square wave will be generated. The outputs of the sinusoidal, triangle, and square waveforms are all simultaneously accessible via independent output terminals.
Learn more about Waveforms here:
https://brainly.com/question/28481104
#SPJ4
A person of dubious technical ability tells you that two of the direction angles for a particular vector are 30 and 40 degrees. If these direction angles are feasible, then determine the possible values for the remaning direction angle. If these direction angles are not feasible, explain why?
In order to solve challenges that are motivated by the intended function, destination ip address, materials, price, and sustainability, interface design is a method.
Interaction Design: What Is It?The process of creating interactive goods and services known as interaction design (IxD) involves an analysis of both the end product and how users will engage with it. Therefore, thorough consideration of users' requirements, constraints, settings, etc. enable designers to alter the output to satisfy specific requirements. As you may already be aware, there are many similarities between interface design and UX design. Because a user's interaction with a product involves both the user as well as the product to a substantial extent, UX design seeks to impact that relationship Describe Interact.
What are the 4 types of interaction?Answer and Explanation: The four primary types of interaction among community members are competition, predation and parasitism, mutualism, and commensalism.
To know more about Interaction visit:
https://brainly.com/question/20414679
#SPJ4
What are the barriers to designing and building hybrid trains? Are there any companies close to completing and finishing a train design? What technology did they have to develop to make it a reality?
Considering that train operations are disrupted and expensive field investigation programs for locomotive operational scenarios are involved.
How operate train barriers?When a train approaches, the most recent level crossings will have barriers that descend to completely or only partially block the road. When a train approaches, they will have a lighting system that flashes red.
What advantages does a hybrid train offer?By incorporating an energy storage device and a method for converting the stored energy into mechanical motion in the drive train in addition to an internal combustion (IC) engine, hybrid vehicles reduce fuel consumption. Mechanical motion can also be converted into stored energy by some hybrids.
To know more about locomotive visit :-
https://brainly.com/question/14206785
#SPJ4
Compared with the traditional licensing model in which users purchase and install software, SaaS _____.a. provides more reliable access in areas with no Internet service
b. offers less expensive upgrades and new releases
c. can be accessed from fewer devices per license
d. requires more maintenance on the part of customers
Answer:
О b. offers less expensive upgrades and new trleases.
Explanation:
Compared with the traditional licensing model in whoch users purchase and install software, SaaS offers less expensive upgrades and new releases.
...
You've just put together a new team of 15 game developers from various cultures and backgrounds. Describe five possible cultural or social differences you might encounter in the workplace. Once you've identified the differences, explain how you might approach the situations and how you might be able to provide a solution that everyone is happy with.
The situations and how you might be able to provide a solution that everyone is happy with ; Language, Social norms,Values, Workplace hierarchy, Work styles.
What is the Social norms?Social norms are the unspoken rules and standards of behaviour that are generally accepted within a society. They are informal, unwritten guidelines that dictate how people should act in a given situation. They are generally accepted patterns of behaviour that are shared by members of a particular culture or group and provide a framework for understanding how to act in a particular context. Social norms can be enforced through informal sanctions such as social disapproval, or formal sanctions such as laws or punishments.
To learn more about Social norms
https://brainly.com/question/29522805
#SPJ1
in the 2010 toyota prius, a boost converter is used to step up the output voltage of the battery (assumed to have constant voltage of 200 v) to the dc-bus voltage level of 250 v. assuming the converter to be ideal, what is the duty cycles needed to do this at steady-state?
Boost converters can also supply power to smaller-scale equipment, including portable lighting systems.
A boost converter can increase the voltage from a single 1.5 V alkaline cell to provide the lamp with the 3.3 V that a white LED generally needs to emit light. High-frequency power conversion circuits known as DC-DC converters use inductors, transformers, and capacitors to reduce switching noise and produce regulated DC voltages. Even with fluctuating input voltages and output currents, closed feedback loops maintain constant voltage output. To "step-up" an input voltage to a higher level, needed by a load, the boost converter is utilized. By holding energy in an inductor and delivering it to the load at a greater voltage, this special feature is made possible.
Learn more about system here-
https://brainly.com/question/27162243
#SPJ4
HDLC (High level Data Link Control) is?
Answer:
High-Level Data Link Control is a bit-oriented code-transparent synchronous data link layer protocol developed by the International Organization for Standardization.
Explanation:
The city of Elmsfield is using electronic sensors to collect data on traffic patterns,
air pollution, and crime. This data is used to manage assets and resources more
efficiently and in real time. Which of these terms would better define the data
collected from the sensors in this scenario?
Real-time asset and resource management is facilitated by the utilization of this data.
What difficulties do data collection efforts face?There are a number of difficulties that must be solved when putting a data collecting plan into practice. Aside from the basic problems with data collection, such as blank fields, missing pages, spelling errors, and erroneous variables, problems with the form structure might result in the collection of false data.
Data capture strategy: what is it?The best way to profile your leads is determined by your data collection strategy, which ensures that you collect the information you need for both marketing and sales purposes while balancing a fantastic user experience and bringing uniformity to the way the data is then stored and even normalized.
To know more about data collection visit:-
https://brainly.com/question/30528695
#SPJ1
Give a simple description of the language generated by the grammar with productions S → aaA,
A → bS,
S → λ
With the same amount of a's and b's for each s, it can be represented as s1bs2 (and is possibly empty).
Because S and L are strictly shorter than L, the induction hypothesis is true for each Sisi, and we are done. Every collection of characters that a script interprets literally is called a string. The phrases "hello world" and "LKJH019283" are examples of strings. In computer programming, a variable is linked to a string. Generally speaking, a string in programming languages can either be all letters or all digits (alphanumeric). A string may be composed entirely of numbers, which is supported by many languages; however, in this instance, the string is commonly referred to as an integer. d. "a,b"*: the quantity of a's equals the quantity of b's, V equals S, A, B, a, b. ∑ = { a,b } R = { S → ε S SASBS. A SBSAS. A → a
Learn more about Strings here:
https://brainly.com/question/29856207
#SPJ4
A bead of mass 100g lying in a rough honzontal straight groove Coefficient of friction 3/4 and equation r(t) = (1+t) i+2t)j (distances measured in metres) is slowly drawn along the groove from the point r(0) to the point r(3) by a force which act parallel to 3i+j - find the magnitude of the force and the work done.
u stewpid vhild u sholuld study more a scool than relay on thiss app so stewpid ur parents Disapointed at u
A shaft carrying amid way rotor of weight 100 n and eccentricity 0. 1cm rotates at 1200 rpm assume the stifness of shaft 0. 2MN/m and external dambing ratio as 01
Which destination address is used in an ARP request frame?
a. 0.0.0.0
b. 255.255.255.255
c. FFFF.FFFF.FFFF
d. AAAA.AAAA.AAAA
e. the physical address of the destination host
The goal of an ARP request is to locate the destination host's MAC address on an Ethernet LAN.
Why is the ARP request's destination address FFFF FFFF FFFF?There is a destination MAC address of ffff in the Ethernet header: ffff: ffff, the broadcast MAC address is the destination MAC address because the frame is sent as a broadcast.
What is the meaning of the MAC address FF FF FF FF FF?The Ethernet broadcast address stands out because every bit is set to 1. As a result, its MAC address is FF in hexadecimal: FF: FF: FF: FF: FF. Data is sent to all hosts on the local subnet using this address.
To know more about Ethernet LAN visit :-
https://brainly.com/question/13013855
#SPJ4
If you've edited your source code file, you don't have to compile again before run to test, since the program last compiled is from the same file.a. TRUE
b. FALSE
The make command uses the gnu c compiler to compile source code into a binary programme.
An Integrated Development Environment, or IDE, is a piece of software that makes it simple for programmers to write, edit, compile, and run their applications. Syntax highlighting and automated code completion are two aspects of IDEs that make a programmer's job simpler.Notable Java IDEs available for many platforms and operating systems include BlueJ, JBuilder, IntellijIDEA, Eclipse, Netbeans, etc. One of the compilers in the GNU Compiler collection, the GNU C Compiler was made available by the Free Software Foundation. The GNU C Compiler is a completely *nix-oriented C language compiler that may be used by issuing instructions from its command line interface.
Learn more about C language here:
https://brainly.com/question/28232020
#SPJ4
Algorithmic trading is controlled and managed by human specialists trained in technology to validate every trade before it is sent to the market.a. trueb. false
Paul Krugerrand rejects the claim that although strategic trade policy is practicably achievable, it is theoretically impossible to implement.
It is true that in those situations there are winners and losers from trade, or in this case, more specifically, from the lack of trade, as Meeker town’s economy does not engage in international trade, forcing consumers to pay $33 for meeker rather than a price more in line with the global average of $35. The losers are the consumers, while the winners are the domestic producers. Consumers would profit if Meeker town allowed international trade because they could purchase cheaper meeker. According to Paul Krugerrand, an economic special interest group will hijack a strategic trade plan, causing it to be distorted and unlikely to be implemented. A special interest group is a group of people inside a larger organization who are committed to advancing a particular field of knowledge, field of expertise, or field of technology.
Learn more about Trade here:
https://brainly.com/question/15072048
#SPJ4
the area A of triangle varies jointly as the base b and the height h. A triangle with abase of 8 cm and height of 9 cm has an area of 36 square centimeters. Find the area when the base is 10 cm and height is 7 cm
The area of the triangle when the base is 10 cm and the height is 7 cm is 35 cm.
How to calculate the area of the triangle?To calculate the area of a triangle, the base, and height of the triangle are multiplied by 1/2.
Decide which side will serve as the triangle's base, then calculate the triangle's height from that base. After that, enter the height and base measurements you have into the formula.
A = kbh
36 = k (8)(9)
36 = k 72
36/72 = k 72/72
½ = k
A = (½)(10)(7)
A = (½)(70)
A = 35
Therefore, the area of the triangle is 35.
To learn more about area of the triangle, refer to the link:
https://brainly.com/question/21327457
#SPJ1
