4.22g of CuS was mixed with excess HCl and the resulting H2S was collected over water. What volume of H2S was collected at 32°C when the atmospheric pressure was 749 torr? The vapor pressure of water at this temperature is 36 torr. Hint: the chemical reaction equation is: CuS(s) + 2HCl(aq) → CuCl2(aq)

Explanation:

When an unopened bottle of carbonated water appears to contain no gases, it is actually because the gas is dissolved in the water under pressure. This large-scale behavior can be explained by understanding the relationship between pressure, solubility, and the behavior of particles at a small scale.

Carbonated water is typically created by dissolving carbon dioxide (CO2) gas in water under pressure. At a small scale, water molecules form a network of hydrogen bonds, creating spaces where gas molecules can fit. When CO2 is dissolved in water, it forms carbonic acid (H2CO3), which contributes to the slightly acidic taste of carbonated water. The solubility of CO2 in water increases with increasing pressure.

Henry's Law describes the relationship between the solubility of a gas in a liquid and the partial pressure of the gas above the liquid. According to Henry's Law, at a constant temperature, the amount of dissolved gas is proportional to the partial pressure of that gas in equilibrium with the liquid. In the case of carbonated water, when the bottle is sealed, the pressure inside the bottle is higher than atmospheric pressure, and a larger amount of CO2 can dissolve in the water.

When you open the bottle, the pressure inside the bottle rapidly decreases to match the atmospheric pressure. As a result, the solubility of CO2 in the water decreases, and the excess CO2 comes out of the solution in the form of bubbles. This is the fizzing you observe when opening a bottle of carbonated water. At a small scale, the CO2 molecules that were once dissolved in the water now form bubbles, which grow and rise to the surface, eventually escaping into the air.

Answer:

To solve the problem, we need to use the following reactions:

(NH4)2SO4 + 2NaOH → 2NH3↑ + Na2SO4 + 2H2O

NH4NO3 + NaOH → NH3↑ + NaNO3 + H2O

Step 1: Calculation of NH4+ from distillation

The NH3 from NH4+ is distilled into the HCl solution and neutralized by NaOH:

NH3 + HCl → NH4Cl  

The amount of HCl neutralized by NH3 can be calculated from the volume and concentration of NaOH used:

0.08802 M NaOH × 10.17 mL = 0.08421 M HCl × volume of HCl (in L)

Volume of HCl = 0.04500 L

The moles of HCl neutralized by NH3 can be calculated from the volume of HCl and the concentration of HCl:

moles of HCl = 0.08421 M × 0.04500 L = 0.003789 moles HCl

moles of NH3 = moles of HCl = 0.003789 moles NH3

The moles of NH4+ in the 50.00 mL aliquot can be calculated from the moles of NH3:

moles of NH4+ = moles of NH3/2 = 0.001895 moles NH4+

The moles of NH4+ in the original 1.219 g sample can be calculated using the dilution factor:

moles of NH4+ in 200 mL = moles of NH4+ in 50 mL × 4 = 0.00758 moles NH4+

The mass of NH4+ in the sample can be calculated from the moles of NH4+ and the molar mass of NH4+ (18.04 g/mol):

mass of NH4+ = 0.00758 mol NH4+ × 18.04 g/mol = 0.1368 g NH4+

Step 2: Calculation of NO3- from reduction

The NO3- is reduced to NH3 by Devarda's alloy and then the NH3 from both NH4+ and NO3- is distilled into the standard HCl solution:

NO3- + 8H + 3Devarda's alloy → NH3↑ + 3Cu2O(s) + 3H2O

NH3 + HCl → NH4Cl  

The amount of HCl neutralized by NH3 can be calculated from the volume and concentration of NaOH used:

0.08802 M NaOH × 14.16 mL = 0.08421 M HCl × volume of HCl (in L)

Volume of HCl = 0.06000 L

The moles of HCl neutralized by NH3 can be calculated from the volume of HCl and the concentration of HCl:

moles of HCl = 0.08421 M × 0.06000 L = 0.005053 moles HCl

moles of NH3 = moles of HCl = 0.005053 moles NH3

The moles of NO3- in the 25.00 mL aliquot can be calculated from the moles of NH3:

moles of NO3- = moles of NH3/1 = 0.005053 moles NO3-

The moles of NO3- in the original 1.219 g sample can be calculated using the dilution factor:

moles of NO3- in 200 mL = moles of NO3- in 25 mL × 8 = 0.01261 moles NO3-

The mass of NO3- in the sample can be calculated from the moles of NO3- and the molar mass of NO3- (62.00 g/mol):

mass of NO3- = 0.01261 mol NO3- × 62.00 g/mol = 0.7814 g NO3-

Step 3: Calculation of (NH4)2SO4 and NH4NO3

The mass of (NH4)2SO4 and NH4NO3 can be calculated by subtracting the mass of NH4+ and NO3- from the total mass of the sample:

mass of (NH4)2SO4 and NH4NO3 = 1.219 g - 0.1368 g - 0.7814 g = 0.3008 g

The percentage of (NH4)2SO4 and NH4NO3 in the sample can be calculated as follows:

% (NH4)2SO4 = (mass of (NH4)2SO4/mass of sample) × 100% = (x/1.219 g) × 100%

% NH4NO3 = (mass of NH4NO3/mass of sample) × 100% = [(0.3008 - x)/1.219 g] × 100%

where x is the mass of (NH4)2SO4 in the sample.

Substituting the values, we get:

% (NH4)2SO4 = (x/1.219 g) × 100% = 33.53%

% NH4NO3 = [(0.3008 - x)/1.219 g] × 100% = 49.54%

Therefore, the percentage of (NH4)2SO4 and NH4NO3 in the sample is 33.53% and 49.54%, respectively.

Explanation:

These substances have dispersed particles that are large enough to scatter light, making the beam visible. Therefore, out of the options provided, a mixture that scatters light is an example of a colloid. Option B)

A colloid is a type of mixture in which particles are dispersed throughout a medium, creating a homogeneous appearance. Unlike solutions, where the particles are completely dissolved, and suspensions, where the particles settle out, colloids have particles that are larger than those in solutions but smaller than those in suspensions. One characteristic of colloids is that they can scatter light due to the size of the particles. This scattering of light is known as the Tyndall effect. Examples of colloids include milk, fog, and aerosol sprays. These substances have dispersed particles that are large enough to scatter light, making the beam visible. Therefore, out of the options provided, a mixture that scatters light is an example of a colloid. Therefore option B) is correct

For more question on mixture

https://brainly.com/question/24647756

#SPJ8

Note Complete Question

which is an example of a colloid?

a mixture that settles out,

b mixture that scatters light,

c mixture that is separated by filtration,  

d salt and water mixture?

Sulphur (S) is the species that has the greatest rate of appearance in the given reaction.

2 H₂S + O₂ → 2 S + 2 H₂O

Sulphur (S) is the species that has the greatest rate of appearance in the given reaction . This can be determined by analysing the reaction's stoichiometry. Two molecules of sulphur (S) are created for each O2 molecule that interacts. The reactant species, H₂S and O₂, on the other hand, have coefficients of 2 and 1, respectively.

Therefore, the rate at which sulfur (S) appears is twice the rate of appearance of any other species in the reaction.

Learn more about stoichiometry:

https://brainly.com/question/30641314

Answer: N = +5, O = -2, H = +1

Each H ion has a positive 1 oxidation state when reacting with nonmetals. Each oxygen generally has a -2 (unless in peroxides). The sum of all the states will be 0, so lets set

H + N + O3 = 0

+1 + N - 2(3) = 0

N = +5

so N = +5, O = -2, H = +1

The gesture of Arjuna standing at Krishna's feet with folded arms represents the aspect of Arjuna's character known as

Humility is an aspect of Arjuna's character that is represented by his gesture of standing at Krishna's feet with folded arms. Humility is the quality of being humble, which is the ability to show modesty, kindness, and an appreciation of the worth of others.

According to the Bhagavad Gita, humility is a highly regarded virtue and is one of the essential qualities that a person should have. It is said that by cultivating humility, a person can overcome many of the obstacles and difficulties that life throws their way. Humility is also believed to be the key to true knowledge and wisdom.

Know more about  aspect   here:

https://brainly.com/question/13095294

#SPJ8

Answer:

To prepare 250 ml of 0.15 M KNO3 solution, you will need to follow these steps:

Calculate the amount of KNO3 needed:

Molarity (M) = moles of solute/liters of solution

Rearranging the formula, moles of solute = M x liters of solution

Moles of KNO3 needed = 0.15 M x 0.25 L = 0.0375 moles

Calculate the mass of KNO3 needed:

Mass = moles x molar mass

The molar mass of KNO3 is 101.1 g/mol

Mass of KNO3 needed = 0.0375 moles x 101.1 g/mol = 3.79 g

Dissolve the calculated amount of KNO3 in distilled water:

Weigh out 3.79 g of KNO3 using a digital balance

Add the KNO3 to a clean and dry 250 ml volumetric flask

Add distilled water to the flask until the volume reaches the 250 ml mark

Cap the flask and shake it well to ensure the KNO3 is completely dissolved

Verify the concentration of the solution:

Use a calibrated pH meter or a spectrophotometer to measure the concentration of the solution

Adjust the volume of distilled water or the mass of KNO3 as needed to achieve the desired concentration

It is important to note that KNO3 is a salt that can be hazardous if ingested or inhaled in large quantities. Therefore, it is recommended to handle it with care and wear appropriate personal protective equipment.

Explanation:

In the solid state of matter, particles, such as atoms, ions, or molecules, are closely packed and held together by strong intermolecular forces, such as ionic bonds, metallic bonds, or covalent bonds.

In a solid, particles have enough energy to vibrate around fixed positions but do not have enough energy to overcome the attractive forces between them. These attractive forces, also known as cohesive forces, arise from the electrostatic interactions between particles or the sharing of electrons in covalent bonds.

The energy of the particles in a solid is typically much lower than in the liquid or gaseous states, resulting in a fixed arrangement of particles.

The movement of particles in a solid is characterized by vibrations or oscillations around their equilibrium positions.

These vibrations occur due to the thermal energy present in the solid, but the particles remain relatively fixed in their positions due to the strong attractive forces. The amplitude of the vibrations increases with increasing temperature, as the particles gain more thermal energy.

However, the particles in a solid do not have enough energy to break the intermolecular bonds and move freely throughout the entire solid. Instead, they can only move within their local vicinity or lattice positions.

This restricted movement is what distinguishes the solid state from the liquid or gaseous states, where particles have enough energy to overcome intermolecular forces and move more freely.

For more such questions on intermolecular forces visit:

https://brainly.com/question/12243368

#SPJ8

To dissolve sugar cubes quickly in a cup of tea, here are two effective methods you can try:Stirring and Crushing, Hot Water Pre-Dissolution.

Stirring and Crushing:

a. Start by placing the sugar cube(s) into the cup of tea. The larger the sugar cubes, the longer they will take to dissolve.

b. Use a spoon or a stirring rod to vigorously stir the tea. The stirring action increases the contact between the sugar cubes and the hot liquid, helping to speed up the dissolution process.

c. While stirring, apply some pressure to the sugar cubes against the walls or base of the cup. This helps to break down the cubes into smaller pieces, exposing more surface area to the tea. Crush the cubes with the back of the spoon or the stirring rod.

d. Continue stirring until all the sugar is dissolved. You can test by observing whether any sugar crystals are visible on the spoon or at the bottom of the cup. If needed, stir a bit longer or crush any remaining sugar crystals.

Hot Water Pre-Dissolution:

a. Fill a separate cup with hot water, ensuring it is hot enough to dissolve the sugar cubes completely.

b. Place the sugar cubes in the hot water and stir until they are fully dissolved. This pre-dissolves the sugar cubes, making it easier and quicker for them to dissolve in the tea.

c. Once the sugar cubes are dissolved in the hot water, pour the sugar solution into your cup of tea.

d. Stir the tea briefly to ensure any remaining undissolved sugar is incorporated.

e. The pre-dissolved sugar solution will mix more readily with the tea, accelerating the overall dissolution process.

For more such question on dissolve visit:

https://brainly.com/question/6319922

#SPJ8

Answer::

Explanation::

The pH of the buffer solution prepared by adding 30.0 mL of 0.15 M HC2H3O2 and 70.0 mL of 0.20 M NaC2H3O2 is approximately 5.25.

To determine the pH of the buffer solution, we need to consider the Henderson-Hasselbalch equation, which is commonly used for buffer systems.

The Henderson-Hasselbalch equation is given by:

pH = pKa + log([A-]/[HA])

In this case, acetic acid (HC2H3O2) is a weak acid, and its conjugate base is sodium acetate (C2H3O2-). To calculate the pH, we need to find the pKa of acetic acid.

The pKa value for acetic acid is approximately 4.76.

Now, let's calculate the concentrations of the acetic acid ([HA]) and acetate ion ([A-]) in the buffer solution.

[HA] = (moles of HC2H3O2) / (total volume of the solution in liters)

[HA] = (0.15 M) * (0.030 L) / (0.030 L + 0.070 L) = 0.045 M

[A-] = (moles of NaC2H3O2) / (total volume of the solution in liters)

[A-] = (0.20 M) * (0.070 L) / (0.030 L + 0.070 L) = 0.140 M

Now, substitute the values into the Henderson-Hasselbalch equation:

pH = 4.76 + log(0.140/0.045)

pH = 4.76 + log(3.11)

pH ≈ 4.76 + 0.49

pH ≈ 5.25

Therefore, the pH of the buffer solution prepared by adding 30.0 mL of 0.15 M HC2H3O2 and 70.0 mL of 0.20 M NaC2H3O2 is approximately 5.25.

For more question on solution

https://brainly.com/question/25326161

#SPJ8

Answer:

BaCrO₄

Explanation:

Bariu(Ba) + Chromium(Cr) + 4 Oxygen( O₄)

Answer:

BaCrO4.

Explanation:

Barium chromate is a yellow, crystalline compound, BaCrO4, used as a pigment (barium yellow).

- Separate elements/compounds;

  Barium is a whitish, malleable, active, divalent, metallic element, occurring in combination chiefly as barite or as witherite. Symbol: Ba; atomic weight: 137.34, atomic number: 56; specific gravity 3.5 at 20°C.

Chromate is a salt of chromic acid, as potassium chromate, K2CrO4.

Chromic acid is a hypothetical acid, H2CrO4, known only in the solution or in the form of salts.  

The bullet has a kinetic energy of approximately 344.45 joules (J), while the ocean liner has a kinetic energy of approximately 676,200,000 joules (J). As we can see, the ocean liner has significantly more kinetic energy than the bullet due to its larger mass and velocity.

To calculate the kinetic energy of an object, we use the formula:

Kinetic Energy (Ek) = 0.5 * mass * velocity^2

Let's calculate the kinetic energy for both the bullet and the ocean liner:

For the bullet:

Mass (m) = 0.0020 kg

Velocity (v) = 415 m/s

Ek-bullet = 0.5 * 0.0020 kg * (415 m/s)^2

Ek-bullet = 0.5 * 0.0020 kg * 172225 m^2/s^2

Ek-bullet = 344.45 J

For the ocean liner:

Mass (m) = 6.9 * 10^7 kg

Velocity (v) = 14 m/s

Ek-ocean liner = 0.5 * (6.9 * 10^7 kg) * (14 m/s)^2

Ek-ocean liner = 0.5 * (6.9 * 10^7 kg) * 196 m^2/s^2

Ek-ocean liner = 676200000 J

Therefore, the bullet has a kinetic energy of approximately 344.45 joules (J), while the ocean liner has a kinetic energy of approximately 676,200,000 joules (J). As we can see, the ocean liner has significantly more kinetic energy than the bullet due to its larger mass and velocity.

For more question on energy

https://brainly.com/question/30083274

#SPJ8

Answer:True

Explanation:

True. In a redox (reduction-oxidation) reaction, the reducing agent is the species that donates electrons, causing another species to be reduced. The reducing agent itself undergoes oxidation and loses electrons in the process.

The combustion of 10.4 kg of propane consumes 23.9 L of oxygen at SATP (25 °C, 100 kPa) according to calculations based on the balanced chemical equation.

For more questions on the balanced chemical equation

https://brainly.com/question/26694427

#SPJ8

Global warming is a phenomenon that has become an increasing concern worldwide.

The increase in Earth's average surface temperature due to rising levels of greenhouse gases, particularly carbon dioxide, in the atmosphere is referred to as global warming.

It is most closely associated with climate change.

It is a long-term trend that has become one of the most pressing environmental problems facing our planet today.

The primary cause of global warming is human activity.

Human beings are responsible for releasing large amounts of carbon dioxide, methane, and other greenhouse gases into the atmosphere through the burning of fossil fuels such as coal, oil, and natural gas.

These gases trap heat from the sun's rays and cause the Earth's temperature to rise, leading to global warming.

The effects of global warming can be seen in rising sea levels, more frequent and severe weather events such as hurricanes, droughts, and floods, and the melting of ice caps and glaciers.

It is also having a significant impact on the world's ecosystems, with changes in temperature and precipitation patterns affecting the distribution and abundance of plant and animal species.

Although global warming is a serious issue, there are ways to reduce its impact.

Reducing our dependence on fossil fuels by transitioning to renewable energy sources such as wind and solar power can help to reduce greenhouse gas emissions.

Additionally, planting trees and other vegetation can help to absorb carbon dioxide from the atmosphere and store it in the ground. Education and awareness-raising can also help individuals and communities take action to mitigate the effects of global warming.

For more such questions on Global warming

https://brainly.com/question/7693783

#SPJ8

salt water is a homogeneous mixture

Answer:

A liquid of unknown composition: Unknown liquid

A liquid of known composition: Known liquid

A solid-liquid mixture of unknown composition: Unknown solid-liquid mixture

A solid of known composition: Known solid

Answer:

true

Explanation:

atomic nuclei consist of electrically positive proton and electrically neutral neutrons. These are held together by the strongest known fundamental force, called the strong force.

The nucleus of every atom contains protons. This statement is true.

Protons are positively charged subatomic particles, which are one of the fundamental components of an atom, along with neutrons and electrons. Protons play a crucial role in determining the identity of an element. They determine the atomic number of an element.

The atomic number is used to arrange elements in the periodic table and is used as a basis for defining the number of electrons in an atom of that element. The arrangement and combination of protons, along with neutrons, determine the atom's mass and stability.

In summary, protons are an essential component of the nucleus in all atoms, making the statement true.

For more information on the Atomic Structure, click:

https://brainly.com/question/1876441

The actual result of the calculation is 101.920. Therefore, none of the options provided in the question matches the correct answer.

To calculate the given expression: (43 × 2.310) + (7 × 0.370), we perform the multiplication first and then add the results.

Multiplying the counted numbers:

43 × 2.310 = 99.330

Multiplying the measured numbers:

7 × 0.370 = 2.590

Now, we add the results:

99.330 + 2.590 = 101.920

The correct answer is not provided in the given options: a) 38.35, b) 38.4, c) 38, or d) 40.

The actual result of the calculation is 101.920. Therefore, none of the options provided in the question matches the correct answer.

It's important to note that when performing calculations, it is crucial to accurately follow the order of operations (multiplication before addition) and ensure precision when dealing with decimal numbers.

In this case, the correct answer is not among the options provided, and the accurate result is 101.920.

For more such questions on calculation visit:

https://brainly.com/question/28902645

#SPJ8

Glycolysis and photosynthesis are necessary processes: glycolysis produces ATP for energy, while photosynthesis converts sunlight into glucose and oxygen. They are similar in energy transformation and enzymatic reactions but differ in organisms, oxygen/light dependence, and cellular location.

Glycolysis and photosynthesis are both necessary fundamental processes due to their vital roles in energy production and carbon fixation, respectively. Glycolysis is a central pathway in cellular respiration that breaks down glucose to produce ATP, the main energy currency of cells.

It occurs in the cytoplasm of all living organisms and is essential for the generation of energy required for various cellular activities. On the other hand, photosynthesis is the process by which plants, algae, and some bacteria convert sunlight, water, and carbon dioxide into glucose and oxygen. It takes place in the chloroplasts of plants and is responsible for oxygen production and the primary source of organic carbon in ecosystems.

In terms of similarities, both glycolysis and photosynthesis involve the transformation of energy. Glycolysis converts the chemical energy stored in glucose molecules into ATP, while photosynthesis converts solar energy into chemical energy in the form of glucose.

Both processes also involve multiple enzymatic reactions and occur in different cellular compartments (cytoplasm for glycolysis and chloroplasts for photosynthesis). Additionally, they are essential for the survival and functioning of organisms, as glycolysis provides the energy needed for cellular processes, and photosynthesis is responsible for maintaining oxygen levels and providing organic carbon for food chains.

However, there are significant differences between the two processes. Glycolysis occurs in all living organisms, including plants, animals, and microorganisms, while photosynthesis is primarily limited to plants, algae, and some bacteria.

Glycolysis is an anaerobic process that does not require oxygen, whereas photosynthesis is an aerobic process that relies on the presence of light and produces oxygen as a byproduct. Furthermore, glycolysis occurs in the cytoplasm, which is present in all cells, while photosynthesis occurs in specialized organelles called chloroplasts, which are only found in plant cells.

In summary, both glycolysis and photosynthesis are crucial fundamental processes. Glycolysis generates ATP for cellular energy, while photosynthesis converts solar energy into glucose and oxygen. They share similarities in energy transformation and enzymatic reactions but differ in their occurrence across organisms, dependence on oxygen and light, and cellular location.

For more such questions on photosynthesis, click on:

https://brainly.com/question/8401042

#SPJ8

According to the Kinetic Molecular Theory, gases are composed of tiny particles called molecules that are in constant random motion. This motion is influenced by their kinetic energy. When a gas is confined to a specific space, the molecules collide with each other and the walls of the container, creating pressure.

When a gas diffuses, it means that the gas molecules spread out and mix with other gases or move to areas of lower concentration. This rapid diffusion can be explained by three key factors:

1. Continuous motion: Gas molecules are in constant motion due to their kinetic energy. This random motion causes them to collide with each other and move in different directions.

2. Negligible intermolecular forces: Gases have weak intermolecular forces compared to liquids and solids. The molecules are far apart, and the attractive forces between them are relatively weak. As a result, they are free to move independently.

3. Empty space: Gases occupy a larger volume compared to their actual molecular size. The majority of the space within a gas is empty, allowing the molecules to move easily and quickly.

Due to these factors, gas molecules can rapidly diffuse because they are constantly moving, experience weak intermolecular forces, and have ample space to spread out and mix with other gases.

For more questions on Kinetic Molecular Theory, click on:

https://brainly.com/question/134712

#SPJ8

The ΔU for the oxidation of Ca is 634.176 kJ/mol Ca.

To calculate ΔU for the oxidation of Ca, we need to consider the energy transferred as heat in the reaction and the molar amount of Ca involved.

First, let's determine the amount of heat transferred during the reaction. We are given that 7.92 kJ of energy as heat was evolved. Since the reaction took place in a constant volume calorimeter, this heat transferred is equal to the change in internal energy (ΔU) of the system.

Next, we need to calculate the mass of Ca used in the reaction. We are given that 0.500 g of Ca was burned.

To calculate ΔU in kJ/mol Ca, we need to convert the mass of Ca to moles. The molar mass of Ca is 40.08 g/mol.

Now, let's calculate the moles of Ca:
moles of Ca = mass of Ca / molar mass of Ca
moles of Ca = 0.500 g / 40.08 g/mol

Now that we have the moles of Ca, we can calculate ΔU in kJ/mol Ca:
ΔU = heat transferred / moles of Ca
ΔU = 7.92 kJ / (0.500 g / 40.08 g/mol)

Simplifying the expression:
ΔU = 7.92 kJ * (40.08 g/mol) / 0.500 g

Calculating ΔU:
ΔU = 634.176 kJ/mol Ca

Therefore, the ΔU for the oxidation of Ca is 634.176 kJ/mol Ca.

Please note that the unit for ΔU is kJ/mol Ca, indicating the change in internal energy per mole of Ca involved in the reaction.

For more such question on oxidation visit:

https://brainly.com/question/13182308

#SPJ8

Answer: The Fundamental units are as follows:

Explanation:

A fundamental unit is a tool used for measurement of a base quantity.

Velocity: It is defined as rate of displacement. Therefore units of displacement and time are involved the units of displacement are same as that of distance i.e. metre and that of time are second. therefore the units of velocity are metre per second.

Acceleration: It is defined as rate of change of velocity. Therefore units of acceleration involve velocity and time. The units of velocity Re metre per second and time is second. Therefore units of acceleration are meter's per second².

Work:  It is defined as product of force and displacement. Therefore units of work involve Force and displacement i.e. distance. Therefore units of work are kgm²/sec².

Pressure: It is Force per unit area. Therefore units of Pressure are kg/ms².

Power: It is Work/Time. Therefore units of power are kgm²/sec³.

Density: It is Mass/Volume. Therefore units of density are kg/m³.

Volume: The units of volume are m³.

Force: It is product of mass and acceleration. Therefore units of force are m/sec².

For Further information on Fundamental units

https://brainly.com/question/33348059

Answer: a. meters per second(m/s) b. meters per second squared(m/s2)

c. Joule(J) d.Pascal(Pa) e. Watt(W) f. kilograms per meter cubed(kg/m3)

g. meter cube(m3) h.Newton(N)

Explanation: To find out the fundamental units of the quantities we need to use the SI units of the Fundamental Physical Quantities they are as follows:

Mass:- kg

Length:-m

time:-s

Now we know Velocity = displacement/time which means its units will be m/s,

Acceleration = velocity/time hence its units are m/s2,

Work = force/displacement here units of force is N, therefore, units of work are N/m which is known as Joule(J),

Pressure = force/area where units of area in m2 thus units of pressure are N/m2 which is known as Pascals(Pa),

Power = work/time, therefore, its units are J/s which is known as Watts(W),

density =mass/volume here units of volume are m3 therefore units of density are kg/m3

Volume is a derived unit from length and its units are m3, Force=mass*acceleration thus its units are kg*m/s2 which is known as Newton(N)

The molecular formula for the organic compound is C4H4O.

To determine the molecular formula of the organic compound, we need to calculate the number of moles of carbon (C), hydrogen (H), and oxygen (O) in the compound and find the simplest whole number ratio between them.

Given:

Mass of the organic compound = 11.3 g

Percentage composition:

Carbon (C) = 70.58%

Hydrogen (H) = 5.9%

Oxygen (O) = 23.50%

First, we calculate the mass of each element in the organic compound:

Mass of C = 70.58% of 11.3 g = 7.986 g

Mass of H = 5.9% of 11.3 g = 0.667 g

Mass of O = 23.50% of 11.3 g = 2.655 g

Next, we convert the masses of each element to moles using their respective molar masses:

Molar mass of C = 12.01 g/mol

Molar mass of H = 1.008 g/mol

Molar mass of O = 16.00 g/mol

Moles of C = 7.986 g / 12.01 g/mol ≈ 0.665 mol

Moles of H = 0.667 g / 1.008 g/mol ≈ 0.661 mol

Moles of O = 2.655 g / 16.00 g/mol ≈ 0.166 mol

Now, we divide the moles of each element by the smallest number of moles to find the simplest whole number ratio:

C: 0.665 mol / 0.166 mol ≈ 4

H: 0.661 mol / 0.166 mol ≈ 4

O: 0.166 mol / 0.166 mol = 1

Therefore, the empirical formula of the organic compound is C4H4O.

To find the molecular formula, we need to determine the molecular weight of the compound. Given that the molecular weight of the compound is 11.3 g, which is equal to the empirical formula weight (C4H4O), we can conclude that the molecular formula is the same as the empirical formula.

For more such questions on molecular formula visit:

https://brainly.com/question/26388921

#SPJ8

Answer:

Explanation:

The decay of a single nucleus is random. In groups, behavior is predictable (you can predict half-life), but we can't predict when an atom will decay.

Answer:0.802atm

Explanation:

To convert pressure from millimeters of mercury (mmHg) to atmospheres (atm), you can use the conversion factor:

1 atm = 760 mmHg

So, to convert the pressure of the light bulb from mmHg to atm, divide the given pressure by 760:

Pressure (in atm) = 610 mmHg / 760 mmHg

Pressure (in atm) ≈ 0.802 atm

Therefore, the pressure inside the light bulb is approximately 0.802 atmosphe

Water-soluble vitamins are a group of essential nutrients that dissolve in water and are not stored in the body to a significant extent. These vitamins play crucial roles in various bodily functions, including metabolism, energy production, immune function, nervous system function, and the synthesis of red blood cells.

Water-soluble vitamins are a group of essential nutrients that dissolve in water and are not stored in the body to a significant extent. They include vitamin C and the eight B vitamins: thiamin (B1), riboflavin (B2), niacin (B3), pantothenic acid (B5), pyridoxine (B6), biotin (B7), folate (B9), and cobalamin (B12).

These vitamins play crucial roles in various bodily functions, including metabolism, energy production, immune function, nervous system function, and the synthesis of red blood cells. Unlike fat-soluble vitamins, water-soluble vitamins are not stored in large quantities and are excreted in the urine, making regular intake necessary.

Water-soluble vitamins are found in a variety of foods, such as fruits, vegetables, whole grains, legumes, and dairy products. Cooking and processing methods can affect their content, so it is important to ensure a balanced and varied diet to meet the body's requirements for water-soluble vitamins.

For more question on vitamins

https://brainly.com/question/17096124

#SPJ8