When two objects with different mass are sitting on the same height ,the object with higher mass has more kinetic energy.
Higher the mass of the object higher the gravitational energy.It is the sum of potential energy and kinetic energy, It is the energy of an object either in motion or the energy that is stored in objects by their position.
Eg =mgh
Where ,m=mass
g= gravitational field
h= height
When an object is lifted it has gravitational potential energy.when it is dropped it begins to lose it,then form kinetic energy.
Eg (initial) =Ek (final)
So, the object with higher mass has high kinetic energy.
To learn more about gravitational potential energy please visit:
https://brainly.com/question/26588957
#SPJ4
A cosmic catastrophe jolts earth so that its axis is perpendicular to the orbital plane between earth and the sun. The largest effect of this change would be?.
A cosmic catastrophe jolts earth so that its axis is perpendicular to the orbital plane between earth and the sun therefore the largest effect of this change would be the elimination of seasonal variation.
What is Season?This is referred to as the period of the year that is distinguished by special climate conditions and examples include winter, summer etc.
In a situation where a cosmic catastrophe results in it being perpendicular to the orbital plane between earth and the sun there will be no seasonal variation as a result of it hindering the effect of the sun and other factors.
Read more about Season here https://brainly.com/question/12455866
#SPJ1
into how many possible components can a single force be resolved? a) three components b) an unlimited number c) four components at right angles to each other d) two components\
A single force is resolved by An unlimited number. Option B.
This single force can be decomposed into two components, upward and to the right. Each component represents the influence of this chain in the specified direction. Any force can be decomposed into individual partial forces, just as individual partial forces can be put together.
The force can be decomposed graphically or by trigonometry into two force components. Each set of forces on an object can be replaced by a single force and a single acting pair that is statically equivalent to the original set of forces and moments. This set of equivalent forces and pairs is called an equivalent force pair system.
Learn more about A single force here:-https://brainly.com/question/388851
#SPJ4
a croquet mallet delivers an impulse of 9.97 n s to a 0.34- kg croquet ball initially at rest. what is the speed of the ball immediately after being struck?
The speed of the ball immediately after being struck is 28.65 m/s.
Impulse is equal to momentum change when a collision happens and no external forces on the system.
I = Δp
I = p' - p
I = mv - mu
u = initial speed (m/s)m = mass of the object (kg)v = final speed (m/s)I = impulse (Ns)p = initial momentum (Ns)p' = final momentum (Ns)Parameter
I = 9.97 Nsm = 0.34 kgu = 0 m/sI = mv - mu
9.97 = 0.34v - (0.34×0)
9.97 = 0.34v
[tex]v = \frac{9.97}{0.34}[/tex]
v = 28.65 m/s
Learn more about Impulse and momentum here: https://brainly.com/question/20586658
#SPJ4
james bond is trying to jump from a helicopter into a speeding corvette to capture the bad guy. the car is going 30.0 m/s and the helicopter is flying completely horizontally at 100.0 m/s. the helicopter is 120 m above the car and 440 m behind the car. how long must james bond wait before jumping in order to safely make it into the car? use 3 sf
James Bond should must wait for 6.82 second before jumping in order to safely make it into the car.
The speed of the car of the bad guy is 30m/s.
The speed of the helicopter of James Bond flying is 100m/s. Helicopter is flying at a height of 120m and it is behind 440m of the car.
The speed of the helicopter relative to the car is 70m/s.
So, with the speed James Bond has to jump into the car which is at a depth of 120m and at horizontal distance of 440m.
Assuming that James bond jump directly vertically down into the car.
We can write,
Time taken by the helicopter to cover the distance of 440 meters.
Time = distance/relative speed
Time = 440/70
Time = 6.82 seconds.
So, James Bond should wait for 6.82 seconds.
To know more about Speed and distance, visit,
https://brainly.com/question/26046491
#SPJ4
what type of cloud that has a thin wispy appearance, consists of ice crystals, and often precedes a warm front?
Cirrus clouds .Since they are made completely of ice crystals descending through the atmosphere, they are wispy.
What weather do cirrus clouds bring?Cirrus clouds are thrown across the sky in strong winds and are thin, wispy clouds.Fair weather may be indicated by a few cirrus clouds, but expanding cover indicates a shift in the weather (an approaching warm front) will take place within the next 24 hours.Being entirely made of ice crystals that have fallen through the atmosphere, they are wispy; if blown horizontally by winds, they take on a distinctive hooked appearance.Prior to a warm front, where the air masses collide at high altitudes, cirrus clouds appear, frequently signaling an impending weather changeCirrus clouds won't affect you if you're flying under visual flight rules because they'll be high above you. Cirrus clouds, which resemble long, thin, wispy white streamers high in the sky, are comprised of ice crystals.Due to their resemblance to a horse's tail, they are frequently referred to as "mare's tails."To learn more about cirrus clouds refer
https://brainly.com/question/19764963
#SPJ4
if a cannonball were fired horizontally from a cannon atop a very high mountain what would its trajectory look like
The trajectory of the cannonball will be in parabolic motion.
A trajectory is an object that only gravity acts on. The downward force, gravity, accelerates the projectile downward. The vertical components of motion are independent of each other, so gravity does not change the object's horizontal velocity. A vertical force does not cause horizontal movement. A vertical force acting on a horizontally moving object causes the object to deviate from its linear trajectory.
When an object moving forward is affected by gravity, it falls in a parabolic arc. Since the projectile is an object affected only by gravity, the projectile's path forward from the initial thrust momentum is parabolic.
Learn more about the trajectory in
https://brainly.com/question/28874076
#SPJ4
A soccer ball rests on the ground in a stationary position. Which of the following best describes the forces acting on the ball? (1 point)
Responses
unequal forces
unbalanced forces
accelerating forces
balanced forces
an ac adaptor for a telephone answering unit uses a transformer to reduce the line voltage of 80 v (rms) to a voltage 9.8 v. the rms current delivered to an answering system is 392 ma. if the primary (input) coil in the transformer in the adaptor has 170 turns, how many turns are there on the secondary (output) coil? answer in units of turns.
The secondary coil of the transformer is 21 turns.
We need to know about transformers to solve this problem. The transformer is a device that changes the output voltage by using different turns on its coil. The ratio of output voltage and input voltage should follow this equation
Vo / Vi = Ns / Np
where Vo is output voltage, Vi is input voltage, Ns is secondary turns and Np is primary turns.
From the question above, the given parameters are
Vi = 80 V
Vo = 9.8 V
Np = 170 turns
By using the equation, we can calculate the secondary turns
Vo / Vi = Ns / Np
80 / 9.8 = 170 / Ns
Ns = 170 . 9.8 / 80
Ns = 20.825
Thus we can round the secondary turns to 21.
Find more on transformer at: https://brainly.com/question/25886292
#SPJ4
if the sun were replaced by a one-solar-mass black hole, group of answer choices our clocks would all stop. we would immediately escape into deep space, driven out by its radiation. we would still orbit it in a period of one year. all terrestrial planets would fall in immediately. life here would be unchanged.
we would still orbit it in a period of one year if the Sun were to be replaced with an equally huge black hole.
What if Sun is replaced by black hole?All of the planets would continue to orbit the black hole in their current positions at a safe distance if the Sun were to be replaced with an equally huge black hole.Without the Sun's heat and light, life would be impossible, yet Earth would still exist.The Sun would still be in the center of Earth's orbit.It goes without saying that the Earth's temperature would alter and that we wouldn't be affected by solar winds or solar magnetic storms.we would still orbit it in a period of one year if the Sun were to be replaced with an equally huge black hole.To learn more about Black hole refer,
https://brainly.com/question/468699
#SPJ4
heat generated by cars, factories, furnaces, lights, air conditioners, and heat-absorbing dark roofs and streets help create what is known as a(n) in the central city.
The heat generated by cars, factories, furnaces, lights, air conditioners, and heat-absorbing dark roofs and streets helps create an urban heat island in the central city.
An urban heat island arises while cities update the herbal land cowl with dense concentrations of pavement, homes, and other surfaces that soak up and keep the warmth. This effect increases power costs (e.g., for aircon), air pollutants stages, and warmth-related illness and mortality.
Heat islands form as plants are replaced by asphalt and urban for roads, homes, and other systems necessary to deal with growing populations. those surfaces soak up—rather than replicate—the sun's warmth, causing floor temperatures and basic ambient temperatures to rise.
An urban heat island happens when a city experiences much warmer temperatures than close rural areas. The difference in temperature between urban and less-evolved rural regions has to do with how properly the surfaces in each surrounding absorb and keep warm.
Learn more about an urban heat island here:-https://brainly.com/question/3226982
#SPJ4
prior to the discovery of atmospheric pressure, the failure of wine to pour from the bottom of a barrel unless an opening was made in the top was explained by:
Horror vacui or Nature abhors a vacuum is the principle that explain the inability of wine to pour from the bottom of a barrel without a top opening.
What is Horror vacui ?In physics, horror vacui, or plenism, is a postulate attributed to Aristotle. He articulated a notion, later questioned by the atomism of Epicurus and Lucretius, that nature contains no vacuums since the denser surrounding material continuum would fill the rarity of an incipient void right away.
He also argued against the void in a more abstract sense, saying, for instance, that since a void is nothing by definition, it cannot be said to exist. This is in line with Plato. Furthermore, because it wouldn't have any features, it couldn't be perceived by the senses and its supposition wouldn't be able to add to the explanation.
Thomas Hobbes, Robert Boyle, and others debated the theory in the context of fluid mechanics in the 17th century. Sir Isaac Newton and Gottfried Leibniz continued the discussion in the early 18th century.
To learn more about Nature abhors a vacuum refer :
https://brainly.com/question/17212070
#SPJ4
a magnetic field is used to suspend a wire of mass 0.05 kg and length 0.18 m . the wire is carrying a current of 13 a . what minimum magnetic-field magnitude is needed to balance the pull of gravity?
0.209T minimum magnetic-field magnitude is needed to balance the pull of gravity.
The weight of the mass suspended is equal the force produced by the current carrying conductor in the magnetic field and this is the force needed to balance the pull of gravity
Fm = mg = BIL................................... Equation 1
Make B the subject of the equation
B = mg/IL.................................. Equation 2
Where B = magnetic Field, m = mass, g = acceleration due to gravity, I = Current, L = Length of the wire.
Given: m = 0.05 kg, I = 13 A, L = 0.18 m,
Constant: g = 9.8 m/s²
Substitute into equation 2
B = (0.05×9.8)/(13×0.18)
B = 0.49/2.34
B = 0.209T
What is magnetic field?The area in which the force of magnetism acts around a magnetic material or a moving electric charge is known as the magnetic field.
In the vicinity of a magnet, an electric current, or a shifting electric field, there is a vector field called a magnetic field where magnetic forces can be seen. Electric charges in motion and the intrinsic magnetic moments of elementary particles connected to the fundamental quantum characteristic known as spin create a magnetic field. As parts of the electromagnetic force, one of the four fundamental forces of nature, magnetic field and electric field are interdependent.
To learn more about magnetic field, refer;
https://brainly.com/question/14848188
#SPJ4
Describe what is happening to the pressure and volume of the gas in the two diagrams below, assuming that the temperature of the gas does not change.
The pressure is increasing and accordingly the volume of the gas is decreasing when the temperature of the gas does not changes.
Continuous physical force acting on an object is termed as pressure.
Space occupied by any substance is termed as its volume.
As we know pressure and volume are inversely proportional to each other, this means that if the temperature and amount of any gas in a container is kept constant then the increase in pressure of the gas will cause decrease in the volume of the same gas in the container.
Pressure (P) ∝ [tex]\frac{1}{Volume (V)}[/tex]
When sign of proportionality '∝' is removed constant 'k' is added to the equation
i.e. P = [tex]\frac{k}{V}[/tex]
PV = k
So the given picture clearly depicts that the piston is creating pressure on the gas hence the pressure of the gas is increasing and therefore the volume of the gas is decreasing.
To know more about pressure,
https://brainly.com/question/28583355
#SPJ1
This is the third time I’m asking, please, On a wet road, is a higher coefficient of friction on the tires safer or a lower one and pls explain I don’t get it
Answer:
higher is safer
Explanation:
because it is a wet slippery surface, you would need more friction on the tires, to get more traction in the slippery wet road, if you had low friction you would not move anywhere and or could swerve off somewhere
a ball is shot from the ground straight up into the air with initial velocity of 41 ft/sec. assuming that the air resistance can be ignored, how high does it go?
A ball is shot from the ground straight up into the air with initial velocity of 41 ft/sec. It takes 1.28 sec to reach its its maximum height of 26.27feet.
a ball is shot straight up into the air with initial velocity of 41ft/sec
S = [tex]S_{0} +V_{t} - 16t^{2}[/tex]
height [tex]S_{0} = 0[/tex]
velocity [tex]V_{0}[/tex] = 41ft/sec
S= 0+41t- 16[tex]t^{2}[/tex]
S = 41t -16[tex]t^{2}[/tex]
instantaneous velocity v
V = ds/dt = [tex]V_{0}[/tex]- 32t
V = 41-32t
32t = 41
t = 41/32 = 1.28 sec.
S = 41t-16[tex]t^{2}[/tex]
= 41 ( 1.28)- 16 [tex](1.28)^{2}[/tex]
= 52.48 - 26.21
= 26.27
What is velocity?The pace at which an object's position changes in relation to a frame of reference and time is what is meant by velocity. Although it may appear sophisticated, velocity is just the act of moving quickly in one direction. Since it is a vector quantity, the definition of velocity requires both magnitude (speed) and direction. Its SI equivalent is the meter per second (ms-1). A body is considered to be accelerating if the magnitude or direction of its velocity changes.
To learn more about velocity, refer;
https://brainly.com/question/18084516
#SPJ4
A golfer strikes a golf ball at a 35 degree angle with a vertical velocity of 25 m/s. what is the initial resultant velocity of the golf ball the moment it becomes airborn?
The resultant velocity of the golf ball would be 30.525m/s.
Velocity is a vector quantity so we can deduce velocity components in two form
V = VcosФ + VsinФ
the vertical component is nothing but VcosФ , because it makes 35 degree angle with vertical velocity and the horizontal component is VsinФ.
So according to the question, we can write
25m/s = VcosФ
25m/s = Vcos35
Since cos35 = 0.819, so putting the appropriate values, we get
V = 25/0.819
V = 30.525 m/s
Hence the resultant velocity of the golf ball would be 30.525 m/s.
To learn more about velocity , visit here
https://brainly.com/question/13262345
#SPJ4
what is the difference of chinese and korean music
The music performed on the Chinese instrument was typically fast-paced, technically impeccable, and pitched high. The Korean instrument, however, is normally performed in a low range and with less emphasis.
What's the name of that instrument from China?Chinese musical instrument known as the pipa has four strings and is classified as a plucked instrument. The instrument, which is sometimes referred to as the "Chinese lute," features a peculiar pear-shaped wooden body and 12 to 26 frets.
What is the most popular instrument in China?According to Shanghai Chinese Orchestra director Luo Xiaoci, the guzheng is now regarded as the most well-liked traditional Chinese musical instrument and is comparable to the piano for Western music. A flexible instrument with a wide variety of tones is the guzheng.
To know more about Chinese instrument visit:
https://brainly.com/question/10584100
#SPJ13
two cars, car x and car y, begin accelerating from rest, at the same time. car x is more massive than car y. the net force exerted on each car is identical. after 10 seconds, which car has more momentum?
They all have same amount of momentum.
What is momentum?The quantity of a body's motion is referred to as momentum.Given that momentum depends on both velocity and the direction of the body's motion, it is quantified as "mass velocity". Since velocity and mass are both scalar quantities, momentum is a vector quantity. Momentum = Mass X Velocity.example ,since a truck carrying products has a great mass and is traveling at a high speed, it must slow down before a stop sign because it will be difficult to stop.Despite carrying relatively little mass, a traveling bullet has a lot of momentum because of its high velocity.To learn more about momentum refer to:
https://brainly.com/question/402617
#SPJ4
A wave has a speed of 150 m/s
and a frequency of 10 Hz. What is
the wavelength of this wave?
Answer:
Speed = frequency * wavelength
150m/s = 10Hz* wavelength
10Hz. 10Hz
Wavelength = 15m
naoki's bicycle has a mass of 10 kg. if naoki sits on her bicycle and starts pedaling with a force of 138 n, causing an acceleration of 2 m/s2, what is naoki's mass? a. 71 kg b. 20 kg c. 59 kg d. 69 kg
The correct answer is 59 kg
Given-
Mass of bicycle = 10 kg
F = 138 N
a = 2 m/s²
The mass of any body can be calculated by the force and acceleration of that body. We can use the formula as-
Calculation:
F = ma
m = F/a
= 138/2
= 69 kg
m = mass of bicycle + Naoki's mass. Then
69 = 10 + Naoki's mass
Naoki's mass = 69 - 10 = 59
Naoki's mass = 59 kg
Therefore, the mass of Naoki that sits on the bicycle and is pedalling is 59 kg.
To learn more about mass, refer: https://brainly.com/question/15959704
#SPJ4
two cars collide inelastically and stick together after the collision. before the collision, the magnitudes of their momenta are p1 and p2 . after the collision, what is the magnitude of their combined momentum?
the magnitude of their combined momentum is p=p1+p2
In Newtonian mechanics, an object's mass and velocity are combined to create momentum, more precisely linear momentum or translational momentum. It is a vector quantity with a magnitude and a direction. When an object's mass (m) and velocity (v), which is also a vector quantity, are known, the result is the object's momentum.
The kilogram meter per second (kg m/s), which is equated to the newton-second in the International System of Units (SI), is the unit used to measure momentum.
According to Newton second law of motion, a body's rate of momentum change is equal to the net force acting on it. While momentum varies depending on the frame of reference, it is a conserved quantity in every inertial frame.
Learn more about momentum here:
https://brainly.com/question/904448
#SPJ4
the distance between two successive minima of a transverse wave is 2.76 m. five crests of the wave pass a given point along the direction of travel every 14.0 s. find (a) the frequency of the wave and (b) the wave speed.
The wave's frequency is 0.35 Hz, and its velocity is 0.9857 m/s. Wave speed is the amount of space a wave covers in a certain length of time, such as how many meters it covers in a second.
How fast or how fast is a wave?Despite the fact that technically, velocity implies both direction and speed wave velocity is most often used to describe speed. Wave intensity has no bearing on a wave's velocity, which is determined by the product of the its wavelength and frequency.
Wave speed and frequency: what are they?A stationary point is traversed by waves at a specific frequency over a specified period of time. The following equation demonstrates the connections between the three variables: Wavelength × Wave Frequency = Speed. This equation uses the units of meters for wavelength and hertz (Hz) for frequency, or the number many waves per second.
To know more about wave speed visit:
https://brainly.com/question/28446485
#SPJ4
What is the direction of acceleration at all points in the projectile's path?
later the car is traveling along a long straight road when it passes over a hill. the hill has a radius of 230 m. what is the minimum speed the car must have in order to become airborne as it crests the hill?
The minimum speed at which a car can leave the road at the top is 47.47 m/s
What is the minimum speed?Following are the calculations for the minimal speed at which a vehicle can veer off the road;
The hill has a radius of 230 m
Fc = Fn
[tex]\frac{mv^{2} }{r} = mg \\\frac{v^{2} }{r} =g\\v^{2} =rg \\v=\sqrt{rg}[/tex]
where;
The curving road's radius is 230 meters, and
the acceleration caused by gravity is 9.8 meters per second.
[tex]v = \sqrt{230* 9.8}[/tex]
r = 47.47
As a result, 47.47 m/s is the lowest speed at which a vehicle can exit the road at the top.
Find the approximate centripetal acceleration caused by gravity, g, in meters per second squared, and the radius of the vertical circular motion, r, in meters. Step 2: Using the formula vmin=rg v min = r g, get the object's minimum speed (the speed at the top of the circle).
To learn more about minimal speed refer to:
https://brainly.com/question/26325439
#SPJ4
what is the initial current? (b) what is the rc time constant? (c) what is the current after one time constant? (d) what is the voltage on the capacitor after one time constant?
(a) Initially, the capacitor acts just like a wire:
I = V/R
=6.16/480
= 0.01283 A
= 12.83 mA
(b) Time constant = R*C
= (480) * (1.5*10^-6)
= 7.2*10^-4 s
(c) The voltage across R = Total voltage - voltage across c
= 6.16 - 3.89
= 2.27 V
(d) Voltage across R/R
= 2.27 / 480
= 4.73*10^-3 A
= 4.73 mA
Answer: 4.73 mA
A resistor-capacitor circuit is an electrical circuit consisting of passive components such as resistors and capacitors driven by a current or voltage source. Capacitors store energy and resistors in the circuit control the rate of charging or discharging. The frequency variation of RC/IC circuits is defined as the frequency of the signal flowing through the circuit. Also called natural frequency. An RC circuit is a circuit in which a resistor and a capacitor are connected in series.
Learn more about The initial current here:-https://brainly.com/question/24858512
#SPJ4
PLEASE HELP!!!!
Which story matches the graph?
(1 point)
The elevator moves up, is stationary for a while, then moves down at a faster rate.
The elevator moves up, stays at ground level, then moves down at a faster rate.
The elevator moves up, stays at ground level, then moves down at a slower rate.
The elevator moves up, is stationary for a while, then moves down at a slower rate.
The story that fits the graph is; he elevator moves up, is stationary for a while, then moves down at a slower rate.
What is a position time graph?
The term position time graph shows us how the position of the object is changing with time. The position in this case has to do with the exact point in space where the object can be found. We have here an elevator that could be found at various points.
We now have to turn to the graph and see how the graph can be able to give a description of the motion of the elevator. If we look at the position time graph, it tends to move up and then remain at a point for some time before it moves down.
Based on the analysis that we have made above, we can now look out for any of the stories that fits the description that we have just made here.
Learn more about position time graph:https://brainly.com/question/13693087
#SPJ1
the 3.0-m-long, 100 kg rigid beam of figure ex12.31 is supported at each end. an 80 kg student stands 2.0 m from support 1. how much upward force does each support exert on the beam?
The amount of upward force each support exert on the beam is 751.33 N and 1012.67 N.
What is force?Force can be defined as the product of mass and acceleration of a body.
To calculate the upward force exerted by the beam, we apply the principle of moment.
From the diagram attached,
Taking our moment about N₂,
Mgd₁+mgd₂ = N₂L............ Equation 1Where:
M = Mass of the beam d₁ = mid point of the beamm = Mass of the studentd₂ = Distance of the student from N₂N₂ = Supporrt 2L = Length of the beamg = Acceleration due to gravity.From the question,
M = 100 kgm = 80 kgd₁ = 1.5 md₂ = 1 mL = 3 mg = 9.8 m/s²Substitute these values into equation 1 and solve for N₂
N₂×3 = (100×9.8×1.5)+(80×1×9.8)3N₂ = 1470+7843N₂ = 2254N₂ = 2254/3 N₂ = 751.33 NTo calculate the First support N₁, we use the formula below.
N₁ + N₂ = mg+MgN₁ = mg+Mg-N₂N₁ = (80×9.8)+(100×9.8)-751.33N₁ = 1764-751.33N₁ = 1012.67 NHence, the upward force from each support is 751.33 N and 1012.67 N respectively.
Learn more about force here: https://brainly.com/question/25239010
#SPJ1
What did galileo galilei and isaac newton believe about theories of the natural world?.
Galileo Galilei and Isaac Newton disputed the Aristotelian view that the sun should be at the center of the cosmos and believed that the earth was the center of the universe which is about theories of the natural world.
Unlike the Aristotelians, who believed in observation to look for natural circumstances, their view of nature was founded on experimental results. The basic means of communication with the world in the Aristotelian scientific tradition was observation and the pursuit of "natural" conditions. Galileo investigated earthly motion laws and established the principles of gravity.
First, Newton firmly established the laws of motion and connected them to Kepler's equations of planetary motion. Until Newton, there was no clear link between celestial body motion and earthly physics.
Learn to know more about Natural World on
https://brainly.com/question/28416408
#SPJ4
If the force on a cart is doubled, what happens to the acceleration of the cart?.
Answer:
It will be doubled
Explanation:
F = ma
Let's consider m = 1 (the mass of the cart is not changing so it is constant),
F = 2, and a = 4.
2 = 1 x 4
When doubling force we need to maintain equality so acceleration should double too. To understand it better find the ratio of force and acceleration 2/4 = 1/2. The ratio of force to acceleration should always equal half in all scenarios, this way we can see how equality is maintained.
2x2 = 1 x (4x2)
4 = 1 x 8, and the ratio of force to acceleration is 4/8 = 1/2.
which imaging modality places time of flight information on the x-axis and echo amplitude on the y-axis?
Amplitude modulation, or AM, is a modulation method used in electronic communication, most frequently for radio wave transmission of messages.
What is amplitude mode?A common collective excitation associated with the spontaneous breaking of a continuous symmetry is the amplitude (Higgs) mode. We use a combination of stochastic analytic continuation and quantum Monte Carlo (QMC) simulations to look at the dynamics of the amplitude mode in a three-dimensional dimerized quantum spin system.In physics, amplitude refers to the most displacement or distance that a point on a vibrating body or wave can travel in relation to its equilibrium location.The method of amplitude modulation involves changing the amplitude of the wave signal before it is broadcast. It is frequently used to send information using a radio carrier wave and is known by the abbreviation AM. Electronic communication is where amplitude modulation is most commonly utilized.To Learn more About Amplitude modulation refer to :
https://brainly.com/question/10060928
#SPJ4
