8. If X-Poisson(a) such that P(X= 3) = 2P(X=4) find P(X= 5). A 0.023 B 0.028 C 0.035 D 0.036

The standard deviation for the given set of data 2, 5, 6, 8, and 14 is approximately 4. Therefore, option b is correct.

To compute the standard deviation, we need to follow these steps:

1. Find the mean (average) of the data set.

2. Calculate the difference between each data point and the mean.

3. Square each difference.

4. Find the mean of the squared differences.

5. Take the square root of the mean squared differences to obtain the standard deviation.

The mean of the data set (2, 5, 6, 8, 14) is (2+5+6+8+14)/5 = 7.

The differences between each data point and the mean are:

(2-7), (5-7), (6-7), (8-7), (14-7) = -5, -2, -1, 1, 7.

Squaring each difference gives us: 25, 4, 1, 1, 49.

The mean of the squared differences is (25+4+1+1+49)/5 = 16.

Finally, taking the square root of the mean squared differences, we get the standard deviation: √16 ≈ 4.

Therefore, the standard deviation for the given data set is approximately 4, which corresponds to option b.

Learn more about standard deviation here:

https://brainly.com/question/29115611

#SPJ11

The random variable Y = ∑X_i^2, where X_i^2 is chi-square distributed with one degree of freedom. Consequently, Y is a chi-square distributed with 18 degrees of freedom. The mean of the chi-square distribution with r degrees of freedom is r, and the variance is 2r.

Therefore, in this case, μ = r = 18 and σ^2 = 2r = 36. (b) Using the central limit theorem, we can approximate the distribution of Y by a normal distribution with mean μ = 18 and variance σ^2 = 36/18 = 2. Therefore, Z = (Y - μ) / σ = (Y - 18) / √2 is approximately standard normal. To compare the two probabilities from the table to the approximations, we can find the Z-scores that correspond to the probabilities 0.05 and 0.99 by using a standard normal distribution table. We get that P(Y ≤ 9.390) ≈ P(Z ≤ -2.09) = 0.018, and P(Y ≤ 34.80) ≈ P(Z ≤ 3.10) = 0.999.

To know more about random variable visit :-

https://brainly.com/question/30789758

#SPJ11

The approximate probability that more than half of the randomly selected 50 people in the United States will have type O blood can be calculated using the binomial distribution. This involves determining the probability of getting more than 25 successes in 50 trials with a success rate of 45%.

To calculate the probability, we can use the binomial probability formula: P(X > 25) = 1 - P(X ≤ 25), where X represents the number of people with type O blood among the 50 selected.
Using this formula, we can calculate the cumulative probability of getting 25 or fewer successes in 50 trials, and then subtract it from 1 to get the probability of more than 25 successes. This can be done using statistical software or a binomial probability table.
Alternatively, we can approximate the probability using the normal approximation to the binomial distribution. With a large sample size (50) and a success rate not too close to 0 or 1, we can use the normal distribution to estimate the probability. We can calculate the mean and standard deviation of the binomial distribution and then use the properties of the normal distribution to find the probability of more than 25 successes.
It's important to note that the approximation using the normal distribution is valid when the sample size is sufficiently large. In this case, with 50 people randomly selected, it is reasonable to use the normal approximation.

Learn more probability here
https://brainly.com/question/32117953



#SPJ11

a) Interval [5, 7]:

Average rate of change = [tex]\(\frac{{f(7) - f(5)}}{{7 - 5}}\)[/tex]

b) Interval [-4, 4]:

Average rate of change = [tex]\(\frac{{f(4) - f(-4)}}{{4 - (-4)}}\)[/tex]

To know more about rate visit-

brainly.com/question/18029149

#SPJ11

To compute the desired probabilities and expectations, we can use the moment generating functions and the properties of independent random variables.

(a) P(W + 2X = 3):

Since X and W are independent random variables, their moment generating functions can be multiplied together.

Mx(t) = e^(4e^(t-4))

Mw(t) = 2t

To find the probability P(W + 2X = 3), we need to find the joint distribution of W and X. We can do this by taking the product of their moment generating functions and then finding the coefficient of the term e^(-t):

Mw(t) * Mx(2t) = (2t) * (e^(4e^(2t-4)))

Now, we can find P(W + 2X = 3) by evaluating the coefficient of e^(-t) in the resulting expression.

(b) E(XW):

To find the expected value E(XW), we need to take the derivative of the joint moment generating function with respect to t and evaluate it at t = 0. The resulting value will give us the expected value.

Differentiating the joint moment generating function:

d/dt [Mw(t) * Mx(2t)] = d/dt [(2t) * (e^(4e^(2t-4)))]

After differentiating, we evaluate the expression at t = 0 to obtain the expected value E(XW).

Please note that due to the complex form of the given moment generating functions, the calculations involved may require further simplification or approximation to obtain numerical results.

Learn more about moment generating functions here:

https://brainly.com/question/31988976

#SPJ11

The frequency distribution provides the intervals and corresponding frequencies, but the values within each interval are not given. To calculate the 77th percentile using the given frequency distribution, we need to determine the measurement value that separates the lower 77% of the data from the higher 23%.

We need to make an assumption about the distribution of the data within each interval. For simplicity, we will assume that the values within each interval are uniformly distributed.

To calculate the 77th percentile, we follow these steps:

Calculate the total frequency: Add up all the frequencies given in the table.

Determine the cumulative frequency: Calculate the cumulative frequency for each interval by adding up the frequencies starting from the first interval.

Find the interval containing the 77th percentile: Multiply the total frequency by 0.77 (77%) to obtain the desired percentile.

Interpolate to find the exact measurement value: Use linear interpolation to estimate the measurement value corresponding to the 77th percentile within the interval found in step 3.

By following these steps, we can calculate the 77th percentile using the given frequency distribution.

To know more about frequency distribution, refer here:

https://brainly.com/question/30516923#

#SPJ11

The probability corresponding to the z-score of 0.5833The probability that X is less than 269 is 0.7202 approximatelyTherefore, P(X < 269) = 0.7202The percentage is 72.02% (rounded to 1 decimal place).Hence, the required percentage is 72.02%.

The mean of the distribution, μ = 262 days.Standard deviation, σ = 12 daysWe need to find the probability that the pregnancies last fewer than 269 daysi.e., P(X < 269)The formula to find the z-score of X is given by:z = (X - μ) / σWhere X is the value of the random variable from the distributionμ is the mean of the distributionσ is the standard deviation of the distributionTherefore,z = (269 - 262) / 12 = 0.5833Using standard normal distribution table, we can find the probability corresponding to the z-score of 0.5833The probability that X is less than 269 is 0.7202 approximatelyTherefore, P(X < 269) = 0.7202The percentage is 72.02% (rounded to 1 decimal place).Hence, the required percentage is 72.02%.

Learn more about probability here:

https://brainly.com/question/31828911

#SPJ11

The regression equation for a bivariate set of data is y = 0.5312 + 45.021 with a correlation coefficient of r = 0.352 (significant at a = 0.01).

Regression analysis is a statistical technique used to determine the relationship between a dependent variable (y) and one or more independent variables (x).

The dependent variable is plotted on the y-axis, while the independent variable is plotted on the x-axis in a regression plot. Regression analysis can be used to forecast, compare, and evaluate outcomes.

A regression equation is a mathematical formula that summarizes the relationship between two variables. The regression equation obtained from the analysis is y = 0.5312 + 45.021.

It shows that for every unit increase in x, there will be an increase in y by 0.5312 units, and the baseline value of y will be 45.021.A correlation coefficient of r = 0.352 was obtained.

A correlation coefficient indicates the strength and direction of the relationship between two variables. A value of r = 1 indicates a perfect positive relationship, while a value of r = -1 indicates a perfect negative relationship. In this case, a positive relationship exists between the two variables as r > 0.

Summary: In conclusion, the regression analysis on the bivariate set of data obtained a regression equation of y = 0.5312 + 45.021 with a correlation coefficient of r = 0.352 (significant at a = 0.01). The regression equation shows that for every unit increase in x, y will increase by 0.5312 units, and the baseline value of y will be 45.021. Additionally, a positive relationship exists between the two variables as r > 0.

Learn more about equation click here:

https://brainly.com/question/2972832

#SPJ11

By utilizing the intermediate value theorem, it can be shown that a continuous function f: [0,1] → [0,1] must have at least one fixed point, i.e., a point x ∈ [0,1] where f(x) = x.

We can start by assuming that f does not have a fixed point. Since f(0) and f(1) are both in the interval [0,1], they can be either less than, equal to, or greater than their corresponding inputs. Without loss of generality, let's assume that f(0) > 0 and f(1) < 1. Now, consider the function g(x) = f(x) - x. Since g(0) > 0 and g(1) < 0, g is continuous on [0,1] and must have at least one zero by the intermediate value theorem.

Let c be the zero of g(x), i.e., g(c) = 0. This means f(c) - c = 0, which implies f(c) = c. Therefore, c is a fixed point of f. Hence, we have shown that if f is a continuous function mapping the closed interval [0,1] to itself, it must have at least one fixed point.

Learn more about intermediate value theorem here:

https://brainly.com/question/30403106

#SPJ11

The graph of s(x) = -6x + [tex]8x^2[/tex] + 5x + 3 is concave up at the point with x-coordinate -1. Let us consider the second derivative.

To determine the concavity of a function at a specific point, we need to analyze the second derivative of the function. If the second derivative is positive, the graph is concave up, and if it is negative, the graph is concave down.

Given s(x) = -6x + [tex]8x^2[/tex] + 5x + 3, let's find the second derivative:

s'(x) = -6 + 16x + 5

s''(x) = 16

The second derivative is a constant, 16, which is positive. Since it is always positive, the graph of s(x) is concave up for all values of x. Therefore, at the point with x-coordinate -1, the graph is also concave up.

Learn more about graph here:

https://brainly.com/question/10712002

#SPJ11

The equation of the line is y = -x + 6.Looking at the graph, we can observe that the line passes through the point (1, -5) and (5, -9), indicating a negative slope.

The slope of the line is -1, which matches the coefficient of -x in option OB. Additionally, the y-intercept of the line is -4, which matches the constant term in option OB.

Based on the given graph, it appears to be a straight line passing through the points (1, 5) and (5, 1).

To determine the equation of the line, we can calculate the slope using the formula:

m = (y₂ - y₁) / (x₂ - x₁)

Substituting the values (1, 5) and (5, 1):

m = (1 - 5) / (5 - 1)

m = -4 / 4

m = -1

We can also determine the y-intercept (b) by substituting the coordinates (1, 5) into the slope-intercept form equation (y = mx + b):

5 = -1(1) + b

5 = -1 + b

b = 6.

For more such questions on Negative slope:

https://brainly.com/question/29290734

#SPJ8

The solution is[tex]sin x 2 = ±1/10, cos x 2 = ± (√19) / 2(√5)[/tex], and tan x 2 = ± 1/√19.

We are given that sec(x) = 109 ,Using the formula of sec(x), we get:[tex]sec(x) = 1/cos(x)10/9 = 1/cos(x)cos(x) = 9/10sin^2(x) + cos^2(x) = 1[/tex]

Using the value of cos(x) we get:[tex]sin^2(x) + (9/10)^2 = 1sin^2(x) = 1 - (9/10)^2sin^2(x) = 19/100sin(x) = ± √(19/100)sin(x) = ± ( √19 ) / 10[/tex]

Now, 270° < x < 360° lies in the fourth quadrant of the coordinate plane. In this quadrant, only the sine of the angle is positive.

Hence, [tex]sin(x) = √19 / 10sin(x) = √19 / 10sin(x/2) = ± √[(1 - cos(x))/2]sin(x/2) = ± √[(1 - cos(x))/2] = ± √[(1 - 9/10)/2] = ± √(1/100) = ± 1/10cos(x/2) = ± √[(1 + cos(x))/2] = ± √[(1 + 9/10)/2] = ± √(19/20) = ± (√19) / 2(√5)tan(x/2) = (1-cos(x))/sin(x) = (1 - 9/10)/(√19 / 10) = ± 1/√19So, sin x 2 = ±1/10cos x 2 = ± (√19) / 2(√5)tan x 2 = ± 1/√19[/tex]

To know more about coordinate visit:

https://brainly.com/question/22261383

#SPJ11

The 90% confidence interval for the population mean ≈ (59.933, 68.067).

To construct a 90% confidence interval for the population mean, we can use the formula:

Confidence Interval = xbar ± z * (σ / √n)

Where:

xbar = sample mean (x64)

z = z-score corresponding to the desired confidence level (90% confidence level corresponds to a z-score of approximately 1.645)

σ = population standard deviation (unknown)

n = sample size (21)

Since the population standard deviation (σ) is unknown, we will use the sample standard deviation (s) as an estimate.

However, since the sample size is small (n < 30), we should use the t-distribution instead of the standard normal distribution.

The t-score depends on the degrees of freedom, which is (n - 1) for a sample size of n = 21.

To find the t-score corresponding to a 90% confidence level and 20 degrees of freedom, we can use a t-table or a calculator.

The t-score is approximately 1.725.

Now we can calculate the confidence interval:

Confidence Interval = xbar ± t * (s / √n)

Confidence Interval = 64 ± 1.725 * (10 / √21)

Confidence Interval = 64 ± 1.725 * (10 / 4.5826)

Confidence Interval ≈ 64 ± 4.067

To know more about confidence interval refer here:

https://brainly.com/question/32546207#

#SPJ11

Therefore, the image of an arbitrary quadratic polynomial ax2+bx+c is -4a² + (b - 4c)x + (a - 4c)x² + 2ac - 9b - 6a

The transformation of the arbitrary quadratic polynomial is shown by the linear transformation t:

p3→p3 where p3 is the vector space of all quadratic polynomials of the form ax2+bx+c.

The transformation t satisfies t(1) = 2x2+4, t(x)

= 4x-9, and t(x2)

= -4x2+x-6.  

Hence, we are to find the image of an arbitrary quadratic polynomial ax2+bx+c.

First, we write ax2+bx+c as a linear combination of {1,x,x2} such that:

ax2+bx+c = a(1) + b(x) + c(x2)

= (c-a) + bx + ax2

Then t(ax2+bx+c) = t[(c-a) + bx + ax2]

= t((c-a)(1) + bx(x) + ax2(x2))

= (c-a)t(1) + bt(x) + at(x2)

= (c-a)(2x2+4) + b(4x-9) + a(-4x2+x-6)

= 2ac - 4a^2 - 4ac - 9b + x(-4a+b) + x2(-4c+a)

= -4a^2 + (b-4c)x + (a-4c)x2 + 2ac - 9b - 6a, as required.

To know more about quadratic visit:

https://brainly.com/question/30098550

#SPJ11

The sequence is not arithmetic as the difference between successive terms is not constant.14, 21, 42, 77, ...14 to 21 = 7, 21 to 42 = 21, 42 to 77 = 35.

Therefore, the sequence is not an arithmetic sequence. The definition of an arithmetic sequence is a sequence where each term is the sum or difference of the common difference. The common difference is the term-by-term difference in an arithmetic sequence, which is the same value. An arithmetic sequence is a sequence of numbers where each number is equal to the sum of the previous number and a constant difference.

To know more about arithmetic visit :-

https://brainly.com/question/16415816

#SPJ11

The z-scores for which 98% of the distribution's area lies between-z and z. A) (-2.33, 2.33).

To find the z-scores for which 98% of the distribution's area lies between -z and z, we can use the standard normal distribution table. The standard normal distribution has a mean of 0 and a standard deviation of 1.

Thus, the area between any two z-scores is the difference between their corresponding probabilities in the standard normal distribution table. Let z1 and z2 be the z-scores such that 98% of the distribution's area lies between them, then the area to the left of z1 is

(1 - 0.98)/2 = 0.01

and the area to the left of z2 is 0.99 + 0.01 = 1.

Thus, we need to find the z-score that has an area of 0.01 to its left and a z-score that has an area of 0.99 to its left.

Using the standard normal distribution table, we can find that the z-score with an area of 0.01 to its left is -2.33 and the z-score with an area of 0.99 to its left is 2.33.

Therefore, the z-scores for which 98% of the distribution's area lies between -z and z are (-2.33, 2.33).

Hence, the correct answer is option A) (-2.33, 2.33).

To know more about z-scores, visit:

https://brainly.com/question/30557336

#SPJ11

To calculate the initial deposit amount needed to have a specific amount in a savings account after a certain number of years, we can use the formula pomo = [tex]cco * (1 + mohy)^m^o^h[/tex].

The given formula pomo = [tex]cco * (1 + mohy)^m^o^h[/tex] represents the calculation for the initial deposit amount (pomo) needed to achieve a desired amount in a savings account. Let's break down the components of the formula:

pomo: This represents the desired final amount in the savings account after a certain number of years.

cco: This refers to the initial deposit amount or the current balance in the savings account.

mohy: This represents the fixed annual interest rate expressed as a decimal.

moh: This denotes the number of years the money will be invested in the account.

By plugging in the desired final amount (pomo), the current balance (cco), the annual interest rate (mohy), and the number of years (moh) into the formula, we can calculate the initial deposit amount required to achieve the desired final amount in the specified time frame.

Learn more about: Initial

brainly.com/question/32209767

#SPJ11

(a) The complex Fourier series of f(t) is given by:

f(t) = ∑[c_n * exp(i * n * ω * t)]

where c_n represents the complex Fourier coefficients and ω is the fundamental frequency.

(b) The trigonometric Fourier series of f(t) can be obtained by separating the real and imaginary parts of the complex Fourier series and expressing them in terms of sine and cosine functions.

(a) To determine the complex Fourier series of f(t), we need to find the complex Fourier coefficients, c_n. We can use the given recursive definition of f(t) to derive a relationship for the coefficients.

Let's start by considering the interval 0 ≤ t < 7. In this interval, the function f(t) can be expressed as:

f(t) = 4t + 6f(t + 7)

Since f(t + 7) represents the same function shifted by 7 units to the right, we can rewrite the above equation as:

f(t + 7) = 4(t + 7) + 6f(t + 14)

Now, substituting this expression back into the original equation, we have:

f(t) = 4t + 6[4(t + 7) + 6f(t + 14)]

Expanding further, we get:

f(t) = 4t + 24(t + 7) + 36f(t + 14)

Simplifying this equation, we have:

f(t) = 4t + 24t + 168 + 36f(t + 14)

Combining like terms, we obtain:

f(t) = 28t + 168 + 36f(t + 14)

Now, let's consider the interval 7 ≤ t < 14. In this interval, the function f(t) can be expressed as:

f(t) = 4t + 6f(t + 7)

Using a similar approach as before, we can rewrite this equation in terms of f(t + 7) and f(t + 14):

f(t) = 4t + 6[4(t + 7) + 6f(t + 14)]

Expanding and simplifying, we get:

f(t) = 4t + 24t + 168 + 36f(t + 14)

Notice that the equation obtained for the interval 7 ≤ t < 14 is the same as the one obtained for the interval 0 ≤ t < 7. This means that the recursive definition of f(t) repeats every interval of length 7.

Based on this observation, we can conclude that the complex Fourier series of f(t) will have periodicity 7, and the fundamental frequency ω will be given by ω = 2π/7.

Now, to find the complex Fourier coefficients c_n, we need to evaluate the integral:

c_n = (1/T) * ∫[f(t) * exp(-i * n * ω * t) dt]

where T is the period of the function (in this case, T = 7).

Substituting the expression for f(t) into the integral, we have:

c_n = (1/7) * ∫[(28t + 168 + 36f(t + 14)) * exp(-i * n * ω * t) dt]

This integral can be evaluated using standard integration techniques, and the resulting expression for c_n will depend on the value of n.

(b) From the expression obtained for the complex Fourier series of f(t), we can separate the real and imaginary parts to obtain the trigonometric Fourier.

For more questions like Function click the link below:

https://brainly.com/question/21145944

#SPJ11

The limit is not zero, we conclude that [tex]f(x) = x^4 + 9x^3 + 4x + 7[/tex] is not[tex]o(x^4)[/tex] as x approaches infinity.

To prove that [tex]f(x) = x^4 + 9x^3 + 4x + 7[/tex]is o([tex]x^4[/tex]) as x approaches infinity,

we need to show that the ratio [tex]\frac{f(x)}{x^4}[/tex] tends to zero as x becomes large.

Let's calculate the limit of [tex]\frac{f(x)}{x^4}[/tex] as x approaches infinity:

lim(x->∞)[tex][\frac{f(x)}{x^4}][/tex]

= lim(x->∞)[tex]\frac{ (x^4 + 9x^3 + 4x + 7)}{x^4}[/tex]

= lim(x->∞)[tex][1 + \frac{9}{x} + \frac{4}{x^3} + \frac{7}{x^4}][/tex]

As x approaches infinity, all the terms with[tex]\frac{1}{x},\frac {1}{x^3},[/tex] and [tex]\frac{1}{x^4}[/tex]tend to zero.

The only term that remains is 1.

Therefore, the limit is:

lim(x->∞) [tex][\frac{f(x)}{x^4}] = 1[/tex]

For such more question on infinity

https://brainly.com/question/7697090

#SPJ11

The critical values zα or zα/2 are the boundary values for the rejection region(s). If a test statistic falls outside of these values, it will result in the rejection of the null hypothesis. A critical value is a value that separates the rejection region from the non-rejection region.

Critical values are the values that are used to determine the region of acceptance and rejection in a hypothesis test. If the test statistic falls within the critical values, then the null hypothesis is not rejected, and if the test statistic falls outside the critical values, then the null hypothesis is rejected.In statistics, a hypothesis test is a way to test a claim about a population parameter using sample data. The level of significance, denoted by α, is the probability of making a Type I error, which occurs when a null hypothesis is rejected when it is actually true.

The critical values are determined based on the level of significance and the degrees of freedom of the test. For example, if the level of significance is 0.05, the critical value is 1.96 (zα/2 = 1.96).The critical values zα or zα/2 are the boundary values for the rejection region(s) in a hypothesis test.

To know more about critical visit:

https://brainly.com/question/15091786

#SPJ11

The statement "if f '(x) > 0 for 6 < x < 8, then f is increasing on (6, 8)" is true. This is because a positive derivative indicates that the function is increasing.

The given statement is true. If f '(x) > 0 for 6 < x < 8, then f is increasing on (6, 8). The slope of the tangent line at x will be positive for all x in the given interval (6,8). This means that the function is getting steeper as x increases. As the slope of the tangent line is positive for all x in the interval (6, 8), this means that the function f is increasing on the interval (6, 8).

In calculus, a function f(x) is increasing over an interval if and only if its derivative f'(x) is greater than zero over that interval. This is because the derivative is the slope of the function, and a positive slope corresponds to an increasing function.

Thus, if f'(x) > 0 for 6 < x < 8, then f is increasing on (6, 8).In other words, the sign of the derivative of f tells us whether the function is increasing or decreasing. A positive derivative means that the function is increasing, while a negative derivative means that the function is decreasing. Therefore, the statement "if f '(x) > 0 for 6 < x < 8, then f is increasing on (6, 8)" is true. This is because a positive derivative indicates that the function is increasing.

To know more about increasing visit :

https://brainly.com/question/31773376

#SPJ11

the perimeter of the new pentagon is 320/7 inches.

If a regular pentagon is dilated by a scale factor of 8/7, all its sides will be multiplied by 8/7. Since the original pentagon has a perimeter of 28 inches, each side of the original pentagon has a length of 28/5 inches (since a regular pentagon has 5 equal sides).

Now, let's find the perimeter of the new pentagon after dilation. Since each side of the original pentagon is multiplied by 8/7, the new pentagon's sides will have a length of (8/7) * (28/5) inches.

Perimeter of the new pentagon = (Number of sides) * (Length of each side)

                            = 5 * [(8/7) * (28/5)]

                            = 40 * (8/7)

                            = 320/7

To know more about pentagon visit:

brainly.com/question/27874618

#SPJ11

The formula for determining the MAD is as follows: [tex]\[MAD=\frac{\sum_{i=1}^n|x_i-\bar{x}|}{n}\]where x[/tex]is the data set, and \[tex][\bar{x}=\frac{\sum_{i=1}^n{x_i}}{n}\][/tex] represents the average of the data set.

In this case, we are supposed to determine the MAD of the set of data without the outlier. The data without the outlier is as follows:88, 85, 90, 75, 99, 100, 77, 76, 92, 82First, we need to calculate the mean of the data set without the outlier.88, 85, 90, 75, 99, 100, 77, 76, 92, 82Add all the values: [tex]\[MAD=\frac{\sum_{i=1}^n|x_i-\bar{x}|}{n}\]where x[/tex]

Divide the sum by the total number of values: [tex]\[\frac{854}{10}=85.4\][/tex]This means the mean of the data set without the outlier is 85.4.

set. Substituting in our values: \[\begin{aligned} [tex]MAD&=\frac{\sum_{i=1}^n|x_i-\bar{x}|}{n} \\ &=\frac{(88-85.4)+(85-85.4)+(90-85.4)+(75-85.4)+(99-85.4)+(100-85.4)+(77-85.4)+(76-85.4)+(92-85.4)+(82-85.4)}{10} \\ &=\frac{23.6+0.4+4.6-10.4+13.6+14.6-8.4-9.4+6.6-3.4}{10} \\ &=\frac{42.2}{10} \\ &=4.22 \end{aligned}\[/tex]Therefore, the MAD of the set of data without the outlier is 4.22. Thus, the correct option is o) 7.4.

To Know more about aligned visit:

brainly.com/question/14396315

#SPJ11

The probability that up to a minute w that there are 5 or fewer calls arriving at a particular switchboard that follows a Poisson process with an average of 5 calls coming per minute is 0.1512.

Here's the solution: Given that calls arriving at a particular switchboard follow a Poisson process with an average of 5 calls coming per minute.

Therefore,λ= 5 calls per minute Probability of 5 or fewer calls coming in a minuteP(X ≤ 5)= P(0) + P(1) + P(2) + P(3) + P(4) + P(5)Where P(X = x) is the probability of x calls coming in a minute using Poisson distribution= (e^(-λ)*λ^x)/x!Let us find the values of P(0), P(1), P(2), P(3), P(4), and P(5)

using Poisson distribution.P(0)= (e^(-5)*5^0)/0! = 0.006737947P(1)= (e^(-5)*5^1)/1! = 0.033689735P(2)= (e^(-5)*5^2)/2! = 0.084224339P(3)= (e^(-5)*5^3)/3! = 0.140373899P(4)= (e^(-5)*5^4)/4! = 0.175467374P(5)= (e^(-5)*5^5)/5! = 0.175467374

Thus, P(X ≤ 5) = 0.006737947 + 0.033689735 + 0.084224339 + 0.140373899 + 0.175467374 + 0.175467374= 0.6169606670

So, the probability that up to a minute w that there are 5 or fewer calls arriving at a particular switchboard that follows a Poisson process with an average of 5 calls coming per minute is 0.616960667.The probability that there are no calls, P(0), was computed.  The final result should be P(X≤5) which was correctly computed.

For more information on average visit:

https://brainly.com/question/897199

#SPJ11

Random error term is defined as the component of the dependent variable that is not explained by the independent variable(s).

The amount of random error in a measurement is often measured by the standard deviation of the measurement or by the variation of the measurement about its expected value. Random errors are caused by various factors such as imperfections in instruments, measurement procedures, and environmental conditions.Influences on the dependent variable that are not included as explanatory variables are referred to as omitted variable bias.

An omitted variable is a variable that affects both the dependent and independent variables but is not included in the model. This omission results in a biased estimate of the coefficients of the included independent variables. This is because the omitted variable can explain some of the variation in the dependent variable that is currently attributed to the included independent variables.

The result is that the coefficients of the included independent variables will be either over- or underestimated.In econometric models, omitted variables can be detected by examining the residual plot. If the residual plot shows that the residuals are not randomly distributed, then it suggests that there are omitted variables in the model.

Know more about the Random error

https://brainly.com/question/30433247

#SPJ11

Since £78.75 is greater than £70, we can conclude that Elyas is incorrect in stating that the sunglasses cost less than £70.

To determine whether Elyas is wrong about the sunglasses costing less than £70, we can use the given exchange rate to convert the cost from euros to pounds.

Given:

Cost of sunglasses = €90

Exchange rate: €1 = £0.875

Step 1: Convert the cost of sunglasses from euros to pounds.

Cost in pounds = €90 × £0.875

Cost in pounds ≈ £78.75

Step 2: Compare the converted cost to £70.

£78.75 > £70

Since £78.75 is greater than £70, we can conclude that Elyas is incorrect in stating that the sunglasses cost less than £70.

By performing the conversion, we find that the cost of the sunglasses in pounds is approximately £78.75, which exceeds Elyas' claim of the sunglasses costing less than £70. Therefore, Elyas is mistaken, and the sunglasses are actually more expensive than he anticipated.

It is important to note that the approximation used in this calculation assumes that the exchange rate remains constant and does not account for additional charges or fees that may be associated with currency conversion. For precise calculations, it is recommended to use up-to-date exchange rates and consider any additional costs involved in the conversion.

For more such questions on cost visit:

https://brainly.com/question/2292799

#SPJ8

Based on the provided stem-and-leaf plot, the data can be listed as follows:

1 | 4

1 | 3 6 6

1 | 5

1 | 6

2 | 8

1 | 7

1 | 2 2

1 | 8

In a stem-and-leaf plot, the stems represent the tens digit, and the leaves represent the ones or tenths digit. Each entry in the plot corresponds to a value.

For example, "1 | 4" represents the value 14, and "1 | 3 6 6" represents the values 13.6, 13.6, and 13.6.

The data in the stem-and-leaf plot consists of the following values: 14, 13.6, 13.6, 13.6, 15, 16, 28, 17, 12.2, 12.2, 18.

to know more about stem-and-leaf plot visit :

https://brainly.com/question/8649311

#SPJ11

Gerontology is the study of aging, including the physical, psychological, and social effects of aging. The conclusion you have provided states that the oldest living person is 119 years old.

Evidence, on the other hand, includes the following:

You are currently taking a class on gerontology, the study of aging.

Your professor has a PhD in gerontology and has assigned you a variety of tasks.

In this context, the evidence provided does not directly support the conclusion that the oldest living person is 119 years old.

However, it provides context to the subject matter and suggests that the information regarding aging and age-related research is being taught and discussed in a learning environment.

To learn more about gerontology, refer below:

https://brainly.com/question/31672786

#SPJ11

To write the expression in the terms requested, you will subtract multiples of 2π from the argument to obtain an angle in the range [0, 2π].csc [-(23π/4)] = csc [(5π/4) - 2π] = -csc (5π/4)csc (3π/2) = -1,sec 12π - sec 0 = -csc (5π/4) - (-1) = -csc (5π/4) + 1.

To solve this problem, you need to know the cofunction identity which states that sec θ

= csc (π/2 - θ). The problem requires you to write an expression equal to sec 12π - sec 0.Using the cofunction identity above, sec 12π - sec 0

= csc [(π/2) - 12π] - csc [(π/2) - 0]

Since π radians is half of a circle, 12π is equivalent to 6 full circles. Therefore, [(π/2) - 12π] is equivalent to [(π/2) - 6(2π)]

= [(π/2) - 12π].π/2 is equal to 6π/4.

Thus, [(π/2) - 0]

= [(6π/4) - 0]

= (3π/2).Substituting the values in the equation above,sec 12π - sec 0

= csc [(π/2) - 12π] - csc [(π/2) - 0]

= csc [-(23π/4)] - csc (3π/2)

Note that the trigonometric function has period 2π. To write the expression in the terms requested, you will subtract multiples of 2π from the argument to obtain an angle in the range [0, 2π].csc [-(23π/4)]

= csc [(5π/4) - 2π]

= -csc (5π/4)csc (3π/2)

= -1,sec 12π - sec 0

= -csc (5π/4) - (-1)

= -csc (5π/4) + 1.

To know more about expression visit:

#SPJ11

The above given figures can be name in two different ways as follows:

13.)line WRS or SRW

14.) line XHQ or QHX

15.) line LA or AL

16.) Line UJC or CJU

17.) Line LK or KL

18.) line PXL or LXP

The names of a figure are gotten from the points on the figure. For example in figure 13, The names of the figure are WRS and SRW.

There are three points on the given figure, and these points are: point W, point R and point S, where Point R is between W and S.

This means that, when naming the figure, alphabet R must be at the middle while alphabets W and S can be at either sides of R.

Figure 13.)

The possible names of the figure are: WRS and SRW.

Figure 14.)

The possible names of the figure are: XHQ or QHX

Figure 15.)

The possible names of the figure are:LA or AL

Figure 16.)

The possible names of the figure are:UJC or CJU

Figure 17.)The possible names of the figure are:LK or KL

Figure 18.)

The possible names of the figure are:PXL or LXP.

Learn more about lines here:

https://brainly.com/question/24644930

#SPJ1