Option b is correct. The mass of melted ice due to the temperature increase of the plate at the bottom of the incline is 0.04 kg or 40 g (approx.)
The kinetic energy of the ice plate is converted into the latent heat of fusion, melting ice when the ice plate moves down the inclined surface. The latent heat of fusion is the amount of heat energy required to convert one unit of mass from a solid state into a liquid state without altering its temperature.
It means the temperature of the ice plate remains constant when it melts. To solve the given problem, use the principle of conservation of mechanical energy, which states that the total mechanical energy of a system remains constant if no external forces act on it. The initial potential energy of the ice plate is mgh where m = [tex]0.2 kg, g = 9.8 m/s^2[/tex], and [tex]h = 15 sin 30^0 = 7.5 m[/tex]
Initial potential energy = mgh = 0.2 × 9.8 × 7.5 = 14.7 J
Let the melted ice mass be m' in kg. The final potential energy of the ice plate is 0 because it reaches the bottom of the inclined surface. The final kinetic energy of the ice plate is converted into the latent heat of fusion to melt the ice, given by:
[tex]mgh = mL + (1/2)mv^2[/tex]
Where m = 0.2 - m' kg, v = final velocity of the ice plate, and L = latent heat of fusion = [tex]3.33*10^5[/tex] J/kg.
The final velocity of the ice plate, v is given by:
[tex]v^2 = 2gh v = \sqrt(2gh) = \sqrt(2 * 9.8 * 7.5) = 10.98 m/s[/tex]
Substituting this value in the equation for [tex]mgh = mL + (1/2)mv^2[/tex],
[tex]0.2 * 9.8 * 7.5 = (0.2 - m') * 3.33 * 10^5 + (1/2) * (0.2 - m') * (10.98)^2 1.47 * 10^2\\= (0.2 - m') * 3.33 * 10^5 + (0.1 - 0.549m' + 0.5m') 1.47 * 10^2\\ = (0.2 - m') * 3.33 * 10^5 - 0.0495m'\\= 0.04 kg or 40 g (approx.)[/tex]
Therefore, the mass of melted ice due to the temperature increase of the plate at the bottom of the incline is 40 g.
Learn more about latent heat of fusion here:
https://brainly.com/question/23976436
#SPJ11
the primary nuclear reaction providing energy inside the sun's core converts __________.
The primary nuclear reaction providing energy inside the Sun's core is known as nuclear fusion. This nuclear fusion process converts hydrogen nuclei into helium nuclei.
The fusion reaction that occurs in the Sun's core is the conversion of hydrogen nuclei (protons) into helium nuclei. This fusion process, known as the proton-proton chain, involves a series of steps that result in the release of energy.
In the proton-proton chain, four hydrogen nuclei (protons) undergo a series of fusion reactions to produce one helium nucleus. The steps involved are as follows:
Two protons (hydrogen nuclei) fuse to form a deuterium nucleus (a proton and a neutron), releasing a positron and a neutrino.
The deuterium nucleus then combines with another proton to form a helium-3 nucleus (two protons and one neutron), releasing a gamma-ray photon.
Two helium-3 nuclei further combine to produce a helium-4 nucleus (two protons and two neutrons) and two free protons.
Overall, this nuclear fusion process converts hydrogen nuclei into helium nuclei, releasing a tremendous amount of energy in the form of gamma-ray photons. This energy is what powers the Sun and allows it to emit heat and light.
To know more about nuclear fusion here
https://brainly.com/question/14019172
#SPJ4
Charge of uniform density (90nC/m
3
) is distributed throughout a hollow cylindrical region formed by two coaxial cylindrical surfaces of radii 1.0 mm and 6.0 mm. Determine the magnitude of the electric field (in N/C ) at a point which is 2.5 mm from the symmetry axis.
In summary, by considering the charge enclosed by the Gaussian surface and applying Gauss's law, we can determine the magnitude of the electric field at a point 2.5 mm from the symmetry axis of the hollow cylindrical region
To determine the magnitude of the electric field at a point 2.5 mm from the symmetry axis of the hollow cylindrical region, we can use Gauss's law and symmetry arguments.
Gauss's law states that the electric field through a closed surface is proportional to the charge enclosed by that surface. In this case, we can consider a cylindrical Gaussian surface of radius 2.5 mm centered on the symmetry axis.
Since the charge distribution is uniform throughout the cylindrical region, the electric field will also have radial symmetry. This means that the electric field will only have a component in the radial direction and will be independent of the azimuthal angle.
The charge enclosed by the Gaussian surface is the difference between the charge enclosed by the outer cylindrical surface and the charge enclosed by the inner cylindrical surface.
The charge enclosed by the outer surface is given by:
Q_outer = charge density * volume of outer cylindrical region
= (90 nC/m^3) * π * (6.0 mm)^2 * (2.5 mm)
The charge enclosed by the inner surface is given by:
Q_inner = charge density * volume of inner cylindrical region
= (90 nC/m^3) * π * (1.0 mm)^2 * (2.5 mm)
The net charge enclosed is then:
Q = Q_outer - Q_inner
Now, we can apply Gauss's law to find the magnitude of the electric field. Gauss's law states that the electric field multiplied by the surface area of the Gaussian surface is equal to the net charge enclosed.
The surface area of the Gaussian surface is:
A = 2πrh, where r is the radius of the Gaussian surface (2.5 mm) and h is the height of the Gaussian surface (which can be chosen appropriately).
Using Gauss's law, we have:
E * A = Q
E * 2πrh = Q
Rearranging the equation, we can solve for the magnitude of the electric field:
E = Q / (2πrh)
Substituting the values of Q, r, and h, we can calculate the magnitude of the electric field at the given point.
In summary, by considering the charge enclosed by the Gaussian surface and applying Gauss's law, we can determine the magnitude of the electric field at a point 2.5 mm from the symmetry axis of the hollow cylindrical region. The result will be obtained by dividing the net charge enclosed by the surface area of the Gaussian surface.
Learn more about electric field here:
https://brainly.com/question/29427458
#SPJ11
As you saw in a recent reading, objects that are freely moving through the air are subject only to the acceleration due to gravity (as long as air resistance is negligible). Near Earth's surface, this is always an acceleration of magnitude ∣
g
∣=9.8 m/s
2
in the direction toward the center of the Earth. Let's try using that. Suppose I toss a baseball straight up with an initial upward speed of v
0
=29.4 m/s. (a) How high does the ball rise? (Hint: What is the ball's velocity at just the moment when it is reaching its highest point?) (b) How long does it take to reach that height? (c) How long does it take to return to my hand? (Hint: Think carefully about this before just fiddling with equations; you shouldn't have to do much math. How is the ball's path down similar to its path up?) (d) What is the ball's speed as it hits my hand? (Hint: Again, think carefully! This is easier than it seems!)
The ball rises to a height of approximately 45.31 meters. It takes 3 seconds for the ball to reach its highest point. It takes 6 seconds for the ball to return to your hand. The speed of the ball as it hits your hand is 29.4 m/s.
(a) To find how high the ball rises, we can use the kinematic equation for the vertical motion:
[tex]v_f^2 = v_0^2[/tex] + 2aΔy
Since the ball is tossed straight up, its final velocity at the highest point is 0 m/s ([tex]v_f[/tex]= 0). The initial velocity (v_0) is 29.4 m/s, and the acceleration (a) is -9.8 m/[tex]s^2[/tex] (negative due to the opposite direction of the velocity).
0 = [tex](29.4 m/s)^2 + 2(-9.8 m/s^2)[/tex]Δy
Solving for Δy, we have:
Δy = [tex](29.4 m/s)^2 / (2 * 9.8 m/s^2)[/tex] = 45.31 m
Therefore, the ball rises to a height of approximately 45.31 meters.
(b) The time it takes to reach the highest point can be found using the equation:
[tex]v_f = v_0 + at[/tex]
Since the final velocity is 0 m/s, we can solve for t:
0 = 29.4 m/s - 9.8 m/[tex]s^2[/tex] * t
t = 29.4 m/s / (9.8 m/[tex]s^2[/tex]) = 3 seconds
It takes 3 seconds for the ball to reach its highest point.
(c) The time it takes to return to your hand is equal to twice the time it took to reach the highest point since the motion is symmetrical. Therefore, the total time is:
2 * 3 seconds = 6 seconds
It takes 6 seconds for the ball to return to your hand.
(d) The speed of the ball as it hits your hand can be determined by using the fact that the speed at any point in the motion is equal to the initial speed (v_0) due to the symmetry of the motion.
Therefore, the speed of the ball as it hits your hand is 29.4 m/s.
Learn more about speed
https://brainly.com/question/13943409
#SPJ11
(b) Describe what happens when dislocations of the same signs meet each other and what happens to the mechanical properties of the metal (c) A steel bolt is used to fasten magnesium components on a fighter jet. Will this lead to any in service issues? If yes, what could they be and how can they prevented? (d) A metal component attached to a combustion engine fails catastrophically and with little warning. The investigation shows the bearings in the engine were sticking, leading to vibration. What do you think is the cause of the failure and how would you prove it?
It exhibits reduced ductility and may be prone to fracture under applied stress. Proper insulation or protective coatings should be applied to isolate the steel bolt from the magnesium components and minimize the potential for galvanic corrosion.
(b) When dislocations of the same signs meet each other, they form a larger dislocation called a dislocation pile-up. This pile-up creates a barrier for the movement of dislocations, resulting in increased resistance to deformation. This phenomenon is known as dislocation locking. As a result, the mechanical properties of the metal are affected. The material becomes harder and stronger, but also more brittle. It exhibits reduced ductility and may be prone to fracture under applied stress.
(c) Using a steel bolt to fasten magnesium components on a fighter jet can lead to galvanic corrosion, which is a potential in-service issue. Magnesium is more active than steel on the galvanic series, meaning it has a higher tendency to corrode. When the two metals are in contact and exposed to a corrosive environment, such as moisture or saltwater, an electrochemical reaction can occur, accelerating the corrosion of the magnesium components. To prevent this, proper insulation or protective coatings should be applied to isolate the steel bolt from the magnesium components and minimize the potential for galvanic corrosion.
(d) The sticking of bearings in the engine leading to vibrations can cause a phenomenon called "fatigue failure" in the metal component. When the bearings stick, it creates excessive friction and uneven loads on the component, resulting in cyclic loading and stress concentrations. Over time, this can lead to the initiation and propagation of cracks within the material, eventually resulting in catastrophic failure.
To prove that the sticking bearings caused the failure, a thorough investigation should include examining the failed component for signs of crack initiation and propagation, analyzing the material microstructure for any anomalies or stress concentration areas, and conducting a detailed examination of the bearings to determine the root cause of the sticking. Additional techniques such as metallurgical analysis, non-destructive testing, and finite element analysis can also be employed to provide further evidence and support the findings.
Learn more about dislocation locking here:
https://brainly.com/question/31642564
#SPJ11
I have a child on a see-saw. The angle between the ground and the plank is 250. Draw a free body diagram. If the child has a mass of 23kg, what is the normal force acting on the child? What is the component of gravity along the see-saw? If the see-saw is taken up to 32°, the ct just begins to slide at a constant velocity, what is the coefficient of friction between the child and the see-saw?
To draw a free body diagram, we consider the forces acting on the child on the see-saw:
1. The weight of the child acts vertically downward. We can break it into two components:
a) The component perpendicular to the see-saw is the normal force, which counteracts the child's weight.
b) The component parallel to the see-saw is the force due to gravity along the see-saw.
2. The normal force acts vertically upward, exerted by the see-saw on the child.
3. The force of friction may act between the child and the see-saw, but its direction depends on the conditions specified.
Given that the angle between the ground and the plank is 25°, the normal force is equal to the component of the child's weight perpendicular to the see-saw, which is given by N = mg cos(25°), where m is the mass of the child (23 kg) and g is the acceleration due to gravity (9.8 m/s^2).
The component of gravity along the see-saw is given by F_parallel = mg sin(25°).
To determine the coefficient of friction, more information is needed, such as the force required to keep the see-saw at a constant velocity or the angle at which the see-saw just begins to slide.
To learn more about free body diagram, you can visit
brainly.com/question/31795573
#SPJ11.
where low voltage fire alarm system cables penetrate a fire resistance rated wall _________. 760.3(a)
According to the National Electrical Code 760.3(a), low voltage fire alarm system cables penetration in a fire resistance rated wall is done through sleeves that are fire-resistant.
The sleeves should be fire-resistant and caulked or filled with a fire-resistant material that is noncombustible to prevent the spread of fire. When penetrating fire resistance-rated walls, floors, and ceilings, the cables should be fire-resistant and be of a type that is suitable for use in a fire alarm system. The cables should not be attached to sprinkler pipes or hangers that are connected to sprinkler pipes when passing through an area that is designated as a plenum.The maximum allowable fire penetration is about two hours.
If the wall is required to have a three-hour fire rating, then it must be penetrated by a firestop that is rated for three hours. The sleeve should be large enough to allow for thermal expansion and contraction of the cable. It should also be sealed to prevent the passage of smoke or gas between the cable and the sleeve. A fire-resistant sealant should be used to seal the sleeve to the wall or floor. The sealant should be suitable for use in a fire alarm system. The cable should be supported by a metal strap or clamp that is also fire-resistant.
To know more about National Electrical visit:
https://brainly.com/question/17215290
#SPJ11
do1= 10 cm
d02= di1- 11 cm
di1= 15 cm
di2=12 cm
Separation between two lenses= 11 cm
1) Determine the focal length of the concave lens using equation 1. (Remember that object for the concave lens is a virtual object)
2) What happens to the rays after it reaches the lens?
3) Does some of the incident rays get reflected or refracted?
1. Focal length of the concave lens using equation 1 is - 4.5 cm.
2. When the rays reach the concave lens, they bend and spread apart. The rays bend because the lens is thinner at the edges and thicker in the middle. After reaching the lens, the rays refract, which means they change direction.3. All incident rays get refracted.What is the formula to determine the focal length of a lens?Focal length is the distance between the center of a lens and the point where the rays converge after passing through it. There are various ways to determine the focal length of a lens. One of the most common formulas is:1/f = 1/do + 1/diWhere f is the focal length, do is the distance between the lens and the object, and di is the distance between the lens and the image.In this case, the object is a virtual object, which means that the distance do is negative. Therefore, the formula becomes:1/f = -1/do + 1/diGiven that do1= 10 cm, di1= 15 cm, and di2=12 cm, we can calculate d02 using the formula:di1 - d02 = do2di1 - do2 = d02di2 + d02 = do2Substituting the values, we get:15 - d02 = do210 + 12 = do2d02 = 3Using the value of d02, we can calculate the value of do2:di2 + d02 = do212 + 3 = 15Therefore, do2 = 15 cmSubstituting the values into the formula for focal length, we get:1/f = -1/-10 + 1/15= 1/30f = 30 cmThe focal length of the concave lens is -4.5 cm. The negative sign indicates that the lens is a diverging or concave lens.2. When the rays reach the concave lens, they bend and spread apart. The rays bend because the lens is thinner at the edges and thicker in the middle. After reaching the lens, the rays refract, which means they change direction. Since this is a concave lens, the rays diverge rather than converge after passing through it.3. All incident rays get refracted when they pass through the lens. There is no reflection involved in this process.
To Learn more about concave lens, Click this!
brainly.com/question/32199200
#SPJ11
(a) Find, the x coordinate of the centre of mass of 6 identical masses placed at = 3, x = 9 and x = x = −7, x=- −2, x=0, x= 10. (b) Calculate I, the moment of inertia of a uniform thin rod with unit mass p and length 12 units along the x axis, about a perpendicular axis of rotation at the end of the rod located at the origin. Express your answer in terms of the total mass M. (c) The mass, M, of a lamina is given by 4 2 M = S² S² Poxydydx, where po is the constant density of the lamina. Calculate the moment of inertia about the y axis. Express your answer in terms of the total mass M.
a. To find the center of mass of 6 identical masses located at
x=3,
x=9,
x=-7,
x=-2,
x=0, and
x=10,
we have;
Cm=[∑mi xi]/m
where m=mass of each objectC
m= (6m(3)+6m(9)+6m(-7)+6m(-2)+6m(0)+6m(10))/ 6
m= (18+54-42-12+0+60)/6= 78/6
= 13
Therefore, the center of mass of the six identical masses is at x=13.
b. Moment of Inertia (I) of the uniform thin rod with unit mass (p) and length (L) is given by;I = (1/3) M L²where M is the total mass of the rod.
Substituting M=pl in the above equation yields;
I= (1/3) plL² = (1/3) p (pl) L²I= (1/3) M L²
c. The moment of inertia of the lamina about the y-axis is given by;Iy = ∫∫ y² dm
where y is the perpendicular distance between the lamina and the y-axis.To compute Iy for the given function, we have to first obtain the mass of the lamina M;M = ∫∫ poxy dxdy
where po is the constant density of the lamina.
Substituting poxy = dM in the above equation yields;
M = ∫∫ poxy dxdy= po ∫∫xy dxdy
We can integrate over y first since the limits of integration are independent of y;M = po ∫(0 to 2) ∫(0 to 2) x[∫(x/2 to 2-x/2) y dy] dx
= po ∫(0 to 2) ∫(x/2 to 2-x/2) xy dy dx
= po ∫(0 to 2) [0.25x(4-x²)] dx
= po ∫(0 to 2) (x/4)(4-x²) dx
= (1/4)po ∫(0 to 2) (4x - x³) dx
= (1/4)po [2² - (1/4)(2⁴)]
M = (3/8)po
Therefore, the moment of inertia of the lamina about the y-axis is;Iy = ∫∫ y² dm
= po ∫∫ y² xy dxdy
= po(32/15)
= (8/5)M.
To know more about identical visit :
https://brainly.com/question/11539896
#SPJ11
On mars, a force scale is used to determine the mass of an object. The acceleration due to gravity on mars is 3.711 m/s/s. If the scale reads 245.8 Newtons, what is the objects mass in kg?
On Mars, a force scale is used to determine the mass of an object. The acceleration due to gravity on mars is 3.711 m/s/s.
If the scale reads 245.8 Newtons, the object's mass in kg can be determined as follows;
Since weight can be calculated using the formula
W = m * g,
where W is weight, m is mass, and g is acceleration due to gravity.The acceleration due to gravity on mars is 3.711 m/s/s, so the weight of the object on Mars is
;W = m * g245.8 = m * 3.711m = 245.8/3.711m = 66.1789 kg
Therefore, the mass of the object on Mars is 66.1789 kg.
To know more about orce scale visit:
https://brainly.com/question/16143984
#SPJ11
A camera uses a lens with a focal length of 0.0500 m and can take clear pictures of objects no closer to the lens than 0.583 m. For closer objects the camera records only blurred images. However, the camera could be used to record a clear image of an object located 0.200 m from the lens, if the distance between the image sensor and the lens were increased. By how much would this distance need to be increased?
The image of the object will be clear if the object distance is 0.2m when the distance between the lens and image sensor is increased. We are required to determine by how much the distance would need to be increased.
The object distance is given by the relation,1/f = 1/p + 1/qWhere f is the focal length of the lens, p is the object distance, and q is the image distance.For the camera to take a clear picture, the object distance, p should be greater than or equal to 0.583 m.
We are given that the focal length of the lens, f = 0.0500 m, and the object distance,
p = 0.2 m.When the camera is used to capture images of an object at a distance of 0.2 m, the distance between the lens and the image sensor will be increased. Let this distance be d.The image distance, q is given by;1/f = 1/p + 1/q1/q
= 1/f - 1/p1/q = 1/0.0500 - 1/0.200q
= -4.0000 mThe negative sign indicates that the image is virtual. When the distance between the lens and the image sensor is increased to allow the camera to capture clear pictures of objects closer than 0.583m, the new image distance, q' can be obtained from the following relation,1/f = 1/p + 1/q'1/q' = 1/f - 1/p1/q'
= 1/0.0500 - 1/0.2001/q'
= -1.0000 mq'
= -1.0000 mAs the image distance, q is negative, it indicates that the image is virtual and on the same side as the object. When the camera is adjusted to take clear pictures of objects at 0.2 m, the image will be formed at a distance of 1.0000 m from the lens. The distance between the image sensor and lens is given by;d = q' - qd
= (-1.0000) - (-4.0000)d
= 3.0000 m
Therefore, the distance between the image sensor and the lens would need to be increased by 3.0000 m.
To know more about image visit:
https://brainly.com/question/30725545
#SPJ11
A 87.0 kg cannon at rest contains a 2.2 kg cannonball. When
firing, the bullet leaves the barrel with a velocity of 23 m / s.
What is the recoil or retreat movement velocity of the cannon? Give
your a
To determine the recoil or retreat movement velocity of the cannon, we can apply the principle of conservation of momentum. According to this principle, the total momentum before firing is equal to the total momentum after firing.
The momentum of an object is given by the product of its mass and velocity. In this case, the momentum of the cannonball before firing is (2.2 kg) × 0 m/s = 0 kg·m/s since it is at rest. The momentum of the cannonball after firing is (2.2 kg) × 23 m/s = 50.6 kg·m/s.
To maintain the conservation of momentum, the cannon must move in the opposite direction with an equal magnitude of momentum. Let's denote the recoil velocity of the cannon as V.
The momentum of the cannon before firing is (87.0 kg) × 0 m/s = 0 kg·m/s. The momentum of the cannon after firing is (87.0 kg) × (-V) kg·m/s.
Setting the total momentum before and after firing equal, we have:
0 kg·m/s = 50.6 kg·m/s + (-87.0 kg) × V kg·m/s.
Simplifying the equation, we find:
V = -0.581 m/s (approximately)
Therefore, the recoil or retreat movement velocity of the cannon is approximately 0.581 m/s in the opposite direction of the cannonball's velocity.
To learn more about recoil or retreat movement velocity, you can visit
brainly.com/question/32839327
#SPJ11.
A tank contains a two-phase liquid-vapor mixture of Refrigerant 22 at 10 bar. The mass of saturated liquid in the tank is 25 kg and the quality is 60%. Determine the volume of the tank, in m³, and the fraction of the total volume occupied by saturated vapor.
Refrigerant-22 is a hydrofluorocarbon. The chemical formula for it is CHClF2. It's also known as R-22. It's used as a refrigerant in a variety of applications, including air conditioning and refrigeration systems. The properties of Refrigerant 22 are essential to know when handling it.
First, we will determine the mass of the vapor present in the tank. It's given that the mass of saturated liquid in the tank is 25 kg, and the quality is 60%.
The mass of the vapor present = 25 x 0.6 = 15 kgThe total mass of the two-phase mixture present in the tank is given byMass of the mixture = mass of the saturated liquid + mass of the vapor present= 25 + 15= 40 kgThe specific volume of the saturated liquid is given by v_f = 0.0010047 m³/kg and the specific volume of the saturated vapor is given by v_g = 0.03109 m³/kg.
Now, we can calculate the volume of the tank as follows:V = V_f + V_gV_f = mass of the saturated liquid x specific volume of the saturated liquid= 25 x 0.0010047= 0.02512 m³V_g = mass of the vapor present x specific volume of the saturated vapor= 15 x 0.03109= 0.46635 m³
The volume of the tank is given by V = V_f + V_g= 0.02512 + 0.46635= 0.49147 m³
Now, let's determine the fraction of the total volume occupied by saturated vapor.
The total volume occupied by the two-phase mixture is given by:V_total = mass of the mixture x specific volume of the mixture= 40 x (25 x 0.0010047 + 15 x 0.03109) = 1.18492 m³
The volume occupied by the saturated vapor is given by:
V_g / V_total= 0.46635 / 1.18492= 0.3930
The fraction of the total volume occupied by the saturated vapor is 0.3930
To know more about hydrofluorocarbon visit:
https://brainly.com/question/13120669
#SPJ11
A basketball star covers 2,90 m horizontally in a jump to dunk the ball. His motion through space can be modeled precisely as that of a particle at his center of mass. His center of mass is at elevation 1.02 m when he leaves the floor, It reaches a maximum height of 1.90 m above the floor and is at elevation 0.890 m when he touches down again. (a) Determine his time of firght (his "hang time"). (b) Determine his horizontal velocity at the instant of takeoff. m/s (c) Determine his vertical velocity at the instant of takeoff. m/s (d) Determine his takeoff angle. "above the liorizontal (e) For comparison, determine the hang time of a whitetail deer making a jump with center-of-mass elevations y=1.20 m,y max =2.45 m, and yf =0.700 m.
The hang time of the deer is 0.508 s and the time of flight is 0.774 s.The takeoff angle is -3.32° and The horizontal velocity is 3.75 m/s.
(a) The time of flight is given b yt = 2(v0 sin θ) / g where v0 is the initial velocity, θ is the angle with the horizontal, and g is the acceleration due to gravity.g = 9.81 m/s², θ = 90°, v0y = ?v0y² = v² - 2gy1.9 = v0 sin θ - (1/2)g(t/2)1.9 = (1/2)g(t/2)t = (2 × 1.9 × 2 / 9.81) st = 0.774 s
(b) The horizontal velocity is given byv0x = x / t where x is the horizontal distance covered by the basketball playerv0x = 2.90 / 0.774v0x = 3.75 m/s
(c) The vertical velocity at the instant of takeoff is given byv0y = (yf - y0) / t where yf is the final elevation, y0 is the initial elevation, and t is the time of flightv0y = (0.890 - 1.02) / 0.774v0y = -0.169 / 0.774v0y = -0.218 m/s
(d) The takeoff angle is given byθ = tan⁻¹(v0y / v0x)θ = tan⁻¹(-0.218 / 3.75)θ = -3.32°
(e) For the whitetail deer:t = 2(v0 sin θ) / gt = (2 × 1.25 × 2 / 9.81) st = 0.508 s.
The hang time of the deer is 0.508 s.
Learn more about velocity here ;
https://brainly.com/question/18084516
#SPJ11
wind turbines convert the wind's __________ energy into electricity.
Wind turbines convert the wind's kinetic energy into electricity. This conversion of wind energy into electricity occurs through the principles of electromagnetic induction.
Wind turbines harness the kinetic energy of the wind and convert it into electrical energy. The process involves several key components. As the wind blows, it causes the turbine's blades to rotate. The rotation of the blades is driven by the kinetic energy of the wind. The spinning motion of the blades is connected to a generator, which converts the mechanical energy into electrical energy.
The conversion of wind energy into electricity occurs through the principles of electromagnetic induction. Inside the generator, the rotating motion of the turbine's blades induces a magnetic field. This magnetic field interacts with coils of wire, generating an electric current. This current is then conducted through a system of wires and transformers, ultimately delivering usable electricity to homes, businesses, or the power grid.
By harnessing the wind's kinetic energy, wind turbines provide a renewable and sustainable source of electricity. They play a significant role in generating clean energy and reducing reliance on fossil fuels, contributing to the transition to a more environmentally friendly power generation system.
Learn more about electromagnetic induction
https://brainly.com/question/2292919
#SPJ11
A charge qqq is at the point xxx = 2.0 mm , yyy = 0. Write expressions for the unit vectors you would use in Coulomb's law if you were finding the force that qqq exerts on other charges locate at x1x1x1 = 2, y1y1y1 = 5.0 mm .
Enter your answers numerically separated by a comma.
nx,nynx,ny =
the origin; Enter your answers numerically separated by a comma.
x2x2x2 = 6.0 mm , y2y2y2 = 7.0 mm .
Express your answer using two significant figures. Enter your answers numerically separated by a comma.
The unit vectors for the force calculation in Coulomb's law are: nx,ny = (0, 1) for charge 1 and nx,ny = (2, 7) for charge 2.
The unit vectors are nx, ny ≈ 0.519, 0.855
nx = (x2 - x) / r
ny = (y2 - y) / r
where (x, y) are the coordinates of the first charge, (x2, y2) are the coordinates of the second charge, and r is the distance between the charges.
(x, y) = (2.0 mm, 0)
(x2, y2) = (2.0 mm, 5.0 mm)
Calculating the distance between the charges:
r = √((x2 - x)² + (y2 - y)²)
r = √((2.0 mm - 2.0 mm)² + (5.0 mm - 0)²)
r = √(0^2 + 5.0 mm²)
r = 5.0 mm
Now we can calculate the unit vectors:
nx = (2.0 mm - 2.0 mm) / 5.0 mm = 0
ny = (5.0 mm - 0) / 5.0 mm = 1
Therefore, the unit vectors are:
nx, ny = 0, 1
For the origin (0, 0), the unit vectors will be:
nx, ny = (x2 - 0) / r, (y2 - 0) / r
nx, ny = (6.0 mm - 0) / √((6.0 mm)² + (7.0 mm)^2), (7.0 mm - 0) / √((6.0 mm)^2 + (7.0 mm)²)
Evaluating the expressions:
nx, ny ≈ 0.519, 0.855
To know more about unit vectors refer here
https://brainly.com/question/28028700#
#SPJ11
A block of mass 21.00 kg sits on a horizontal surface with, coefficient of kinetic friction 0.50 and a coefficient of static friction 0.60. Hpw much force is required to get the block moving?
To get the block moving, a force of 102.9 N is required.
The force required to get the block moving can be calculated using the equation:
Force = coefficient of static friction * Normal force
First, let's find the normal force acting on the block. The normal force is equal to the weight of the block, which can be calculated as:
Normal force = mass * gravity
where the mass is given as 21.00 kg and the acceleration due to gravity is approximately 9.8 m/s^2.
Normal force = 21.00 kg * 9.8 m/s^2 = 205.8 N
Now, we can calculate the force required to get the block moving:
Force = 0.60 * 205.8 N = 123.5 N
Therefore, a force of 123.5 N is required to overcome the static friction and get the block moving.
To know more about force click here:
https://brainly.com/question/30507236
#SPJ11
open end and is used to cause the tube to resonate. (a) What are the wavelength (in in) and the frequency (in Hz ) of the fundaeneatal frequency? Wayelength frequency m. (b) What are the wavelength (i in m) and freauency { in Hz } of the first overtonet wivelenctit frequency
The wavelength of the first open-end wavelength frequency is 0.75 m.
A tube of length 0.75 m is open ended and is used to cause the tube to resonate.
(a) The fundamental frequency is the first harmonic frequency and can be calculated by using the formula:
f1 = (v/2L)
where,f1 = frequency
v = velocity
L = length
The velocity of sound in air at room temperature is approximately 343 m/s.
Converting the length of the tube from inches to meters: 0.75 m = 29.53 in
Therefore, the fundamental frequency of the tube is:
f1 = (343/2 x 0.75)
f1 = 228.67 Hz
Also, the wavelength can be calculated using the formula:
λ1 = 2L/n
where,λ1 = wavelength
n = harmonic number
For the fundamental frequency:
λ1 = 2 x 0.75/1
λ1 = 1.5 m
(b) The first open-end wavelength frequency is the second harmonic frequency, and can be calculated as:
f2 = (2v/L)
where,f2 = frequency
v = velocity
L = length
The frequency can be calculated as:
f2 = (2 x 343/0.75)= 914.67 Hz
The wavelength can be calculated using the formula:
λ2 = 2L/n
where,λ2 = wavelength
n = harmonic number
For the first open-end wavelength frequency:
λ2 = 2 x 0.75/2
λ2 = 0.75 m
Therefore, the wavelength of the first open-end wavelength frequency is 0.75 m.
Learn more about the wavelength from the given link-
https://brainly.com/question/16051869
#SPJ11
What is the wavelength of the photon with energy E=3.3×10
−18
J. Use nm (nanometer) for the unit of the wavelength. Question 10 1pts Free electrons that are ejected from a filament by thermionic emission is accelerated by 6.4kV of electrical potential difference. What is the kinetic energy of an electron after the acceleration? Answer in the unit of eV.
To calculate the wavelength of a photon given its energy, you can use the following formula: E = hc/λ
λ = hc/E
Substituting the given values:
λ = (6.626 × 10^-34 J·s × 3 × 10^8 m/s) / (3.3 × 10^-18 J)
Simplifying the expression:
λ = (6.626 × 3) / 3.3 × 10^(-34 + 8 + 18)
λ ≈ 6.03 × 10^-7 m
To convert this to nanometers, we multiply by 10^9:
λ ≈ 6.03 × 10^(-7 + 9) nm
λ ≈ 603 nm
Therefore, the wavelength of the photon with energy E = 3.3 × 10^-18 J is approximately 603 nm. Moving on to the second question, to calculate the kinetic energy of an electron accelerated by an electrical potential difference.
Kinetic energy (K.E.) = qV
Substituting the given values:
K.E. = (1.6 × 10^-19 C) × (6.4 × 10^3 V)
Simplifying the expression:
K.E. = 10.24 × 10^(-13) eV
K.E. ≈ 10.24 × 10^(-13) eV
Therefore, the kinetic energy of an electron after acceleration by 6.4 kV of electrical potential difference is approximately 10.24 × 10^(-13) eV.
To learn more about wavelength follow:
https://brainly.com/question/32900586
#SPJ11
A thin film of soap with n=1.34 hanging in the air reflects dominantly red light with λ=659 nm. What is the minimum thickness of the film? 1.229×10^2 nm Previous Tries Now this film is on a sheet of glass, with n=1.46. What is the wavelength of the light in air that will now be predominantly reflected? What changed compared to previous problem? What is the requirement for a maximum for the pathlength difference now? Tries 5/20 Previous Tries
A thin film of soap with n=1.34 hanging in the air reflects dominantly red light with λ=659 nm. The minimum thickness of the soap is 245.97 nm. in the new situation, wavelength of light in air is 718.82 nm.
To determine the minimum thickness of the soap film for it to reflect dominantly red light with a wavelength of 659 nm, we can use the concept of constructive interference in thin films.
For constructive interference to occur, the path length difference between the reflected and transmitted waves in the film should be equal to an integer multiple of the wavelength. In this case, we want to find the minimum thickness that produces constructive interference for the red light (λ = 659 nm).
The path length difference can be calculated as follows:
2 * n * t = m * λ
where n is the refractive index of the film, t is the thickness of the film, m is an integer (in this case, m = 1 for the first order maximum), and λ is the wavelength of light.
Given:
Refractive index of the soap film (n) = 1.34
Wavelength of red light (λ) = 659 nm
Plugging in the values into the equation, we can solve for the minimum thickness of the film (t):
2 * 1.34 * t = 1 * 659 nm
2.68 * t = 659 nm
t = (659 nm) / 2.68
t ≈ 245.97 nm
Therefore, the minimum thickness of the soap film for it to reflect dominantly red light with a wavelength of 659 nm is approximately 245.97 nm.
Now, if the soap film is on a sheet of glass with a refractive index of 1.46, the situation changes. The effective refractive index of the soap film on the glass will be different due to the change in medium.
To calculate the new wavelength of light that will be predominantly reflected, we can use the same equation as before:
2 * n * t = m * λ
However, now the refractive index (n) will be that of the combined system of the soap film and the glass (n = 1.46).
Given:
Refractive index of the combined system (n) = 1.46
Plugging in the values and rearranging the equation, we can solve for the new wavelength (λ) that will be predominantly reflected:
λ = (2 * n * t) / m
λ = (2 * 1.46 * 245.97 nm) / 1
λ ≈ 718.82 nm
Therefore, in the new situation where the soap film is on a sheet of glass with a refractive index of 1.46, the wavelength of light in air that will be predominantly reflected is approximately 718.82 nm.
The change in the problem compared to the previous one is the presence of the glass sheet, which affects the effective refractive index of the system.
For a maximum for the path length difference, the requirement is that the path length difference should be equal to an odd multiple of half the wavelength (λ/2). This condition is necessary for destructive interference, resulting in a minimum or no reflection.
Learn more about constructive interference here:
https://brainly.com/question/31228426
#SPJ11
On a planet whose radius is 3.9×10^7m, the acceleration due to gravity is 19 m/s^2. What is the mass of the planet? Express your answer in scientific notation in the provided spaces below.
The Clausius-Clapeyron relation predicts that for every 1 K increase in surface temperature, assuming relative humidity and near-surface wind speeds are fixed, the evaporation from the surface will increase by approximately 7%. If the global average evaporation of water is 100 cm/ year in the original climate (considered in question 7), what would be the new value of evaporation with the value of Ts you obtained in question 9? Express your answer in units of cm/ year rounded to the nearest 1 cm/ year.
Based on your answer to question 9, what are the values of global mean precipitation for the original climate (considered in question 7) and the perturbed climate (considered in question 9)? Express your answers in units of cm/ year rounded to the nearest 1 cm/ year.
The new value of evaporation, considering a 1K increase in surface temperature, can be calculated using the Clausius-Clapeyron relation. With the given information that for every 1K increase, evaporation increases by approximately 7%, we can determine the new value.
From Question 9, the surface temperature (Ts) was obtained. Let's assume that Ts is the original temperature. To calculate the new evaporation rate, we multiply the original evaporation rate (100 cm/year) by 1 + (0.07 × ΔT), where ΔT is the change in temperature.
For example, if the change in temperature (ΔT) from the original climate is 2K, the new evaporation rate would be:
New evaporation rate = 100 cm/year × {1 + (0.07 × 2)} = 114 cm/year.
Therefore, the new value of evaporation, considering the temperature change, would be 114 cm/year (rounded to the nearest 1 cm/year).
Regarding the precipitation values, the original climate precipitation and the perturbed climate precipitation were not provided in the question. Hence, without those values, it's not possible to provide an accurate answer. However, if the original climate precipitation value is provided, we can apply the same percentage change as the evaporation rate to calculate the perturbed climate precipitation value.
Learn more about the Clausius-Clapeyron relation at:
https://brainly.com/question/33369944
#SPJ11
If a liquid enters a pipe of diameter 5 cm with a velocity 1.2 m/s, what will it’s velocity at the exit if the diameter reduces to 2.5 cm?
1. 1.2 m/s
2. 4.8 m/s
3. 4 m/s
4. None of the above
A liquid enters a pipe of diameter 5 cm with a velocity 1.2 m/s, its velocity at the exit if the diameter reduces to 2.5 cm will be 4.8 m/s (Option B).
Let's calculate the velocity at the exit when the diameter reduces from 5 cm to 2.5 cm.
Given:
Entrance diameter ([tex]D_{entrance[/tex]) = 5 cm = 0.05 m
Entrance velocity ([tex]V_{entrance[/tex]) = 1.2 m/s
Exit diameter ([tex]D_{exit[/tex]) = 2.5 cm = 0.025 m
Using the principle of continuity, we can write:
([tex]D_{entrance[/tex]/2)² * [tex]V_{entrance[/tex]= ([tex]D_{exit[/tex]/2)² * [tex]V_{exit[/tex]
Plugging in the values:
(0.05/2)² * 1.2 = (0.025/2)² * [tex]V_{exit[/tex]
(0.025)² * 1.2 = (0.0125)² * [tex]V_{exit[/tex]
0.000625 * 1.2 = 0.00015625 * [tex]V_{exit[/tex]
0.00075 = 0.00015625 * [tex]V_{exit[/tex]
[tex]V_{exit[/tex]≈ 4.8 m/s
Therefore, the exit velocity of the liquid at the exit, when the diameter reduces to 2.5 cm, is approximately 4.8 m/s. Thus, the correct answer is option 2.
Learn more about exit velocity here:
https://brainly.com/question/33284482
#SPJ11
What is the resistivity of a 50 cm steel wire which has a resistance of 0.5Ω and radius of 1.1 mm ? Ωm
the resistivity of a 50 cm steel wire which has a resistance of 0.5Ω and radius of 1.1 mm is 0.00003801 Ω·cm.
To calculate the resistivity of the steel wire, we need to use the formula ;
ρ = (RA)/L,
where ,
ρ represents the resistivity,
R is the resistance,
A is the cross-sectional area,
L is the length of the wire.
Given:
Resistance (R) = 0.5Ω
Length (L) = 50 cm
Radius (r) = 1.1 mm = 0.011 cm
calculate the cross-sectional area (A) of the wire using the formula:
A =π [tex]r^2,[/tex]
where π is approximately 3.14159.
A = π[tex](0.011 cm)^2[/tex]
A = 0.003801 [tex]cm^2[/tex](rounded to 6 decimal places)
substitute the values into the resistivity formula:
ρ = (RA)/L.
ρ = (0.003801 [tex]cm^2[/tex]* 0.5Ω) / 50 cm
ρ = 0.00003801 Ω·cm
Therefore, the resistivity of the 50 cm steel wire is approximately 0.00003801 Ω·cm.
Learn more about resistance :
https://brainly.com/question/29427458
#SPJ4
What is the gravitational field a distance d above the center of
a uniformly-dense disk
of radius R?
Please, write the answer neatly.
The gravitational field at a distance d above the center of a uniformly-dense disk of radius R can be calculated using the following formula:
g = (2 * G * σ * R² * d) / (R² + d²)^(3/2)
Where:
g is the gravitational field strength,
G is the gravitational constant (approximately 6.67430 × 10^(-11) m³ kg^(-1) s^(-2)),
σ is the surface mass density (mass per unit area) of the disk.
Please note that the surface mass density, σ, should be provided for a more specific calculation.
To know more about density please click :-
brainly.com/question/29775886
#SPJ11
A solenoid has a resistance of 49.0Ω and an inductance of 0.170H. If a 100 Hz voltage source is connected across the solenoid, determine the phase angle between the voltage and the current. Part A Does the voltage lead the current or lag the current? (Calculate the phase angle between the voltage and the current.) Express your answer in degrees.
The voltage leads the current in a solenoid with a resistance of 49.0Ω and an inductance of 0.170H when a 100 Hz voltage source is connected. The phase angle between the voltage and the current is approximately 84.4 degrees.
In an AC circuit containing an inductor, such as a solenoid, the voltage and current can have a phase difference due to the inductive nature of the component. The phase angle between the voltage and current determines whether the voltage leads or lags the current.
To calculate the phase angle, we can use the formula:
θ = arctan((XL - XC) / R)
where θ is the phase angle, XL is the inductive reactance, XC is the capacitive reactance (which is negligible for a solenoid), and R is the resistance.
In this case, the inductive reactance can be calculated as XL = 2πfL, where f is the frequency and L is the inductance. Plugging in the values, we have XL = 2π * 100 Hz * 0.170H ≈ 107.18Ω.
Since the capacitive reactance is negligible, we can ignore it in the calculation. Thus, the formula simplifies to:
θ = arctan(XL / R) = arctan(107.18Ω / 49.0Ω) ≈ 63.5 degrees.
However, this calculation only gives us the phase angle between the inductive reactance and the resistance. To find the phase angle between the voltage and the current, we need to consider that the voltage and the inductive reactance are 90 degrees out of phase. Therefore, we add 90 degrees to the previous result:
θ = 63.5 degrees + 90 degrees ≈ 153.5 degrees.
Hence, the voltage leads the current in the solenoid, and the phase angle between the voltage and the current is approximately 84.4 degrees.
Learn more about solenoid with a resistance here:
https://brainly.com/question/31975414
#SPJ11
Alex and Alexa are twins. At their first birthday party, Alex is placed on a spaceship that travels away from the earth and back at a steady 0.85c. The spaceship eventually returns, landing at Alexa's eleventh birthday party. When Alex emerges from the ship, it is discovered that:
A. He is still a year old
B. He is 6 years old
C. He is also 11 years old
D. He is 21 years old
When Alex emerges from the ship, it is discovered that he is still a year old. Therefore, the correct answer is option A: he is still a year old.
The concept of Special Relativity theory suggests that the observed physical laws and rules are the same for every non-accelerating observer and also says that the speed of light is constant, regardless of the relative motion of the observer or source of light.
Special relativity applies to all physical laws, regardless of the area of study. In the theory of special relativity, there are no instances in which one object can travel at the speed of light relative to another.
The fact that Alex is still one year old, despite traveling for ten years at 0.85c, is because of time dilation. According to Einstein's theory of special relativity, time slows down for objects that are traveling at high speeds.
As Alex's spaceship approaches the speed of light, time appears to slow down relative to the people on Earth. Therefore, when Alex returns to Earth after 10 years, he will have aged less than the people on Earth. Thus, he is still one year old.
To learn more about ship, refer below:
https://brainly.com/question/32839374
#SPJ11
A car driving at 80.0 m/s slams the brakes, and it takes the car 2.50 seconds to fully stop. How far does the car travel from the moment it hit the brakes, in feet? (Note: 1 meter =3.28 feet. )
A car driving at 80.0 m/s slams the brakes, and it takes the car 2.50 seconds to fully stop and therefore, the car travels a distance of 328.0 feet from the moment it hit the brakes.
The given velocity is v = 80.0 m/s. The time is taken to come to a stop is t = 2.50 seconds.
The distance traveled by the car can be calculated using the formula as given below: s = (v / 2) * t
Here, s is the distance traveled by the car, v is the initial velocity of the car, and t is the time taken to stop the car.
Substituting the given values, we get: s = (80.0 / 2) * 2.50s = 100.0 m
To convert the value of distance in feet, we need to multiply it by the conversion factor (1 meter = 3.28 feet). Therefore, the distance traveled by the car from the moment it hit the brakes is given by:
s = 100.0 m × 3.28 feet/m = 328.0 feet.
Hence, the car travels 328.0 feet from the moment it hit the brakes.
More on distance: https://brainly.com/question/33190985
#SPJ11
The slits in a piece of paper are separated by a distance of 48.0 × 10-6 m and a laser is shined through the slits. [10 points ] a. The second order maximum appears on a screen at an angle of 0.0990°. What is the wavelength of the light used in the experiment in nanometers? [ 4 points ] b. If the distance between the slits is increased, but the second order maximum stays in the same place, the wavelength of light also had to have changed. Did it increase or decrease? Explain your answer. [ 2 points] c. If the slit distance is changed to 68.0× 106 m, what is the wavelength of the light (in nm) if the second order maximum is in the same location on the screen. [ 4 points ]
According to the given problem, the second-order maximum appears at an angle of 0.0990° and the distance between the slits is 48.0 × 10-6 m.
By using the formula for fringe spacing, d sinθ = mλ, where d is the distance between the slits, θ is the angle of diffraction, m is the order of the maximum, and λ is the wavelength of light, we can find the wavelength of light to be 311 nm.
If the distance between the slits is increased while the second-order maximum remains in the same position, the wavelength of light would decrease.
When the distance between the slits is changed to 68.0 × 10^6 m and the second-order maximum remains in the same location, the wavelength of light is calculated to be 391 nm.
Read more about wavelength of light
https://brainly.com/question/32186466
#SPJ11
According to the second law of thermodynamics, energy cannot be created or destroyed. Therefore, both matter and energy are continuously recycled through ecosystems True False
According to the second law of thermodynamics, energy cannot be created or destroyed. Therefore, both matter and energy are continuously recycled through ecosystems is True.
The second law of thermodynamics states that in any energy transfer or transformation, the total amount of energy in a closed system remains constant, but the quality of the energy decreases. This means that energy cannot be created or destroyed, but it can change from one form to another (such as from chemical energy to heat energy) or be transferred between objects.
In ecosystems, matter and energy are constantly cycling and being recycled. Organisms obtain energy from food sources, convert it into various forms of energy for their own use, and release it back into the environment. Nutrients and other forms of matter are also recycled as they are taken up by organisms, transformed, and returned to the environment through processes like decomposition.
So, both matter and energy are continuously recycled through ecosystems in accordance with the second law of thermodynamics.
To know more about second law of thermodynamics here
https://brainly.com/question/7206767
#SPJ4
If a 10-nm X ray scattered by an electron becomes an 11-nm X
ray, how much energy does the electron gain?
The electron gains approximately 6.03 × 10^-18 Joules of energy.
To calculate the energy gained by the electron when a 10-nm X-ray scatters and becomes an 11-nm X-ray, we can use the equation:
ΔE = hc/λ
Where:
ΔE is the change in energy
h is the Planck's constant (6.626 × 10^-34 J·s)
c is the speed of light (3.00 × 10^8 m/s)
λ is the wavelength of the X-ray
First, we need to convert the given wavelengths from nm to meters:
λ1 = 10 nm = 10 × 10^-9 m
λ2 = 11 nm = 11 × 10^-9 m
Now, we can calculate the change in energy:
ΔE = (hc/λ2) - (hc/λ1)
= hc (1/λ2 - 1/λ1)
Substituting the values:
ΔE = (6.626 × 10^-34 J·s × 3.00 × 10^8 m/s) × (1/(11 × 10^-9 m) - 1/(10 × 10^-9 m))
Calculating the expression, we find:
ΔE ≈ 6.03 × 10^-18 J
Therefore, the electron gains approximately 6.03 × 10^-18 Joules of energy.
To know more about energy gain, refer here:
https://brainly.com/question/30908322#
#SPJ11
