a 10 kg object is moving in a straight-line with an initial speed of 2 m/s. how long (in s) will it take for the speed of the object to increase to 10 m/s if its kinetic energy increases at a rate of 20 j/s? you may treat this as an isolated system. a 10 kg object is moving in a straight-line with an initial speed of 2 m/s. how long (in s) will it take for the speed of the object to increase to 10 m/s if its kinetic energy increases at a rate of 20 j/s? you may treat this as an isolated system.

Positively buoyant refers to that which does not float and does not sink.

According to the archimedes' principal, when an object is immersed in a liquid, the liquid exerts an upward force called buoyant force on the object. In floating state this force is equal to the weight of the volume of the liquid displaced by the object.

Positive buoyant : When the buoyant force is more than the weight of the object.

Negative buoyant: When the buoyant force is less than the weight of the object.

Neutral buoyant: When the buoyant force is equal to the weight of the object.

To know more about Positively buoyant, here

https://brainly.com/question/7379745

#SPJ4

The net charge of two conductors in contact with each other is zero because electrons will redistribute themselves until there is no longer an excess of charge on either conductor, which equalizes the potential between the two conductors, leaving them with no net charge.

The net charge of two conductors in contact with each other is zero due to the behavior of electrons. When two conductors come into contact with each other, the electrons will redistribute themselves until there is no longer an excess of charge on either conductor, equalizing the potential between the two.

As a result, the net charge between the two conductors is zero. This principle can be applied to many situations, ensuring that charge remains balanced and neutralized.

To know more about conductors, click here.

https://brainly.com/question/18084972

#SPJ4

Particle 1 and Particle 2, two particles are observed to have the same centripetal force. Correct options are (A) and (B).

A centripetal force is any force that shifts the direction of motion in the direction of the centre of a circular motion. The portion of the force that is perpendicular to the velocity creates the centripetal force.  

The formula for centripetal acceleration is a = v²/r.

For particle 1: a₁ = v²/r

For particle 2; a₂ = (2v)²/2r = 2v²/r

For particle 3; a₃ = (v/2)²/r = v²/4r

For particle 4; a₄ = (2v)²/3r = 4v²/3r

Centripetal force (F) = ma

Thus,

F₁ = = ma = mv²/r

F₂ = (m/2)a₂ = mv²/r

F₃ = 2ma₃ = 2mv²/4r = mv²/2r

F₄ = m4v²/3r = 4/3 mv²/r  

The given question is incomplete. The complete question is ' Particle Mass Speed Radius

1 m v r

2 m/4 2v r

3 2m v/2 r

4 3m 2v 3r'

To know more about centripetal force:

https://brainly.com/question/30332725

#SPJ4

Answer:

Explanation:

To find the net force on particle q1, we need to calculate the force between each pair of particles and then add them together. The force between two particles is given by Coulomb's law:

F = k * (q1 * q2) / r^2

where F is the force, k is the Coulomb constant (approximately 8.99 x 10^9 N*m^2/C^2), q1 and q2 are the charges of the two particles, and r is the distance between them.

The force between q1 and q2 is:

F = 8.99 x 10^9 N*m^2/C^2 * (8.0 uC * 3.5 uC) / (0.10 m)^2

The force between q2 and q3 is:

F = 8.99 x 10^9 N*m^2/C^2 * (3.5 uC * -2.5 uC) / (0.15 m)^2

The net force on particle q1 is the sum of the two forces, which can be positive, negative or zero, depending on the direction of the force.

It's important to note that this calculation is based on the assumption that the charges are point charges, and that the forces are acting along a straight line. In real-world situations, charges are usually distributed over a certain volume, and the forces acting on the charges can be affected by various factors such as the presence of other charges or conducting materials, which can change the net force.

The density of sample CO₂ gas under the given conditions is calculated to be 2.18 g/L.

Density in grams/litre = (mass of CO₂ gas present in flask)/(volume of flask)

We know, number of moles = (mass)/(molar mass)

Molar mass of CO₂ = 44.01 g/mol

Mass of CO₂ = number of moles × molar mass = 0.297 × 44.01 = 13.071 g

Volume of flask is given as = 6.00 L

So, the density of gas inside the flask = 13.071 g/6 L = 2.18 g/L

Hence, the density of CO₂ gas under the given condition is calculated to be 2.18 g/L.

To know more about density:

https://brainly.com/question/15239264

#SPJ4

The statement that she can use to describe the characteristics of all types of forces is forces act in pairs. The correct option is A.

A force is an effect that can alter an object's motion according to physics. An object with mass can change its velocity, or accelerate, as a result of a force.

The third law of motion by Newton states that equal but diametrically opposed forces always act in pairs.

There is an equal but opposite reaction to every action, to put it another way. This means that when you push against a wall, the wall pushes back against you with an equal amount of force.

Thus, the correct option is A.

For more details regarding force, visit:

https://brainly.com/question/13191643

#SPJ1

The transmission time from when a signal first leaves a satellite and then arrives at a ground station is called round-trip delay time.

The round-trip delay time is the total amount of time it takes for a signal to travel from a satellite to a ground station and back. It is an important metric used in satellite communications to determine the quality of the link between the satellite and the ground station and to correct for any transmission delays that may affect the accuracy of the data being transmitted.

The delay time is affected by several factors, including the distance between the satellite and the ground station, the altitude of the satellite, and the atmospheric conditions along the signal path.

By measuring the round-trip delay time, engineers can make necessary adjustments to the satellite and ground station equipment to ensure reliable and efficient communication.

To learn more about round-trip delay time

https://brainly.com/question/14859280

#SPJ4

Based on the information in the graph, it can be inferred that the force that Bob exerts with his weight is 980 N on Earth, 160 N on the moon, 2,590 N on Jupiter, 61 N on Pluto, 373 N on Mercury, and 80 Not in pampering

To calculate the force that Bob exerts with his mass on different planets we must carry out the following formula.

In this formula we must substitute the values of force of gravity and mass to find the values on each planet. According to the above, the N on each planet would be:

Learn more about newtons in: https://brainly.com/question/13549064

#SPJ1

A. The total force acting on the plane during take-off is 563,140 N. This is calculated by multiplying the thrust of each engine (281,570 N) by the number of engines (2).

An engine is an mechanical device that converts energy into useful work, typically in the form of rotational force. Engines are used in a variety of applications, from cars and airplanes to power plants and generators.

b. The acceleration the plane experiences during take-off can be calculated using Newton's Second Law of Motion, which states that Force = Mass x Acceleration. Therefore, the acceleration is 563,140 N / 369,000 kg = 1.53 m/s2.
c. To calculate the time it takes the plane to reach take-off speeds, we can use the kinematic equation for average acceleration, which states that the time taken is equal to the change in velocity (76 m/s) divided by the acceleration (1.53 m/s2). Therefore, the time taken is 49.8 seconds.
d. Using the kinematic equation for displacement, we can calculate the displacement the plane covers during take-off. This equation states that displacement is equal to the initial velocity (0 m/s) multiplied by the time taken (49.8 seconds) plus one-half of the acceleration (1.53 m/s2) multiplied by the time taken squared (49.8 seconds x 49.8 seconds). Therefore, the displacement is 3,814.7 m.

To learn more about engine
https://brainly.com/question/25870707
#SPJ1

It takes334kJ to melt 1 kg of ice and 210kJ to raise 1 kg of water by 50oC when the ice is converted to water at 0oC and then the water is raised to 50oC.

Given the mass of ice (m) = 1kg = 1000g

Latent heat of water (Lw) = 3.33 x 10^5

Here, the heat is required to melt the ice. So,

The latent heat of fusion of ice (Li) = 334 kJ/kg

We know that, Q = mLf (melting/freezing) where Lf is latent heat of fusion

Qi = 1kg x 334 kJ/kg = 334kJ

Hence, the energy required to melt 1kg of ice is 334kJ

Given temperature (T) = 50oC

To raise 1kg of water to vapor we need latent heat of vaporization which is the Latent heat of water.

Q = mcΔT where c is the specific heat and ΔT is change in temperature.

When the ice is converted to water the temperature is 0oC.

Q = 1000g x 4.2J/g x (50 - 0)

Q = 210kJ

Hence, the energy required to raise 1 kg of water by 50oC is 210kJ

To learn more about latent heat click here https://brainly.com/question/3682999

#SPJ4

To calculate the amount of time the clock ran, we can use the formula

time = charge / current

where charge is measured in coulombs (C), current is measured in amperes (A), and time is measured in seconds (s).

Given that the clock moved 10,700 C of charge at a rate of 0.490 mA, we can plug these values into the formula

time = 10,700 C / (0.490 mA / 1000) A

We convert the current from mA to A by dividing by 1000, since 1 A = 1000 mA.

time = 10,700 C / 0.490 A = 21857.142857142857 s

So the clock ran for approximately 21857.14 seconds or around 6.1 hours.

Learn more about :  clock battery
https://brainly.com/question/30189382

The comparison of the larger intensity earthquake is 2 times that of a smaller intensity earthquake from the given data.

When two ground slabs abruptly move past one another, an earthquake occurs. The region where they slip is the fault or fault plane. The movement creates seismic waves, which travel through the Earth and cause the ground to tremble. These seismic waves are made up of elastic strain energy that has been built up.

The given larger intensity earthquake has 8.4 magnitude.

The given smaller intensity earthquake has 3.7 magnitude.

So, the ratio of intensity is,

⇒ (larger intensity)/(smaller intensity)

⇒ 8.4/3.7 = 2.27 ≈ 2.3 ≈ 2

Hence, we can conclude that larger earthquake's intensity is 2 times as great as the smaller earthquake's intensity.

To know more about earthquake:

https://brainly.com/question/9980894

#SPJ4

The speed of a transverse wave on a string is 557 m/s, time required for a particle of the string to move is 33sec.

C=557m/s

wavelength=0.156m

A=2.69mm=3*10^-3

d=1.27km

frequency=C/wavelength=557/0.156

frequency=3571

total distance moved per sec =4A/T=4Af

                                                   =4*3*10^-3*3571=38

time required=1.27*10^3/38=33sec

Motion in which all points on a wave oscillate along paths at right angles to the direction of the wave's advance. Surface ripples on water, secondary waves, and electromagnetic (e.g., radio and light) waves are examples of transverse waves.

Longitudinal waves are mechanical waves that require a medium for propagation, transverse waves are non-mechanical waves that do not require a medium for propagation.

In a transverse wave, the particles are displaced perpendicular to the direction the wave travels.

Amplitude is  the maximum displacement or distance moved by a point on a vibrating body or wave measured from its equilibrium position.

Wavelength is the distance between identical points (adjacent crests) in the adjacent cycles of a waveform signal propagated in space or along a wire.

Learn more about string here:-

brainly.com/question/30099412

#SPJ4

The rate of disappearance of each reactant is related to the rate of appearance of each product as:

Δ[H2O2]Δt = Δ[H2]Δt = Δ[O2]Δt

The rate of disappearance of H2O2 (Δ[H2O2]/Δt) is equal to the rate of appearance of H2 (Δ[H2]/Δt).

Similarly, the rate of disappearance of H2O2 (Δ[H2O2]/Δt) is equal to the rate of appearance of O2 (Δ[O2]/Δt).

So, in this reaction,

Δ[H2O2]/Δt = Δ[H2]/Δt = Δ[O2]/Δt

or

Δ[H2O2]Δt = Δ[H2]Δt = Δ[O2]Δt

To know more about rate of disappearance please refer:

https://brainly.com/question/13219099

#SPJ4

FUP, the magnitude of the force exerted upward on the bottom of the liquid is equal to pressure times area.

In order to describe an object's maximal size and direction, we use magnitude. Scalar and vector quantities both use magnitude as a common link.

An object with mass can alter its velocity, or accelerate, as a result of a force. A force is the modification of an object's condition brought on by its surroundings. An object will be at stationary or moving as a result of forces. Think of a ball lying still on the ground as an illustration. You must exert considerable force on the ball in order to shift it in any way.

To learn more about force here

brainly.com/question/13191643

#SPJ4

a water wave has a frequency of 0.20 hz. 18 wavelengths will have passed a fixed point after 1.5 minutes.

To calculate the number of wavelengths that have passed a fixed point after a given time, we need to find the distance traveled by the wave and divide it by the wavelength.

First, we need to convert the time from minutes to seconds:

1.5 min = 90 sec

Next, we can find the distance traveled by the wave using the formula:

distance = velocity * time

where the velocity of a water wave is given by the equation:

velocity = frequency * wavelength

In this case, the frequency is 0.20 Hz and the wavelength can be calculated as follows:

wavelength = velocity / frequency

Substituting the values, we get:

wavelength = (0.20 Hz * velocity) / frequency = velocity / frequency

Therefore, the distance traveled by the wave can be calculated as:

distance = velocity * time = (0.20 Hz * wavelength) * 90 sec = 18 * wavelength

Finally, the number of wavelengths that have passed a fixed point after 1.5 minutes is calculated as:

number of wavelengths = distance / wavelength = 18 * wavelength / wavelength = 18

Therefore, 18 wavelengths will have passed a fixed point after 1.5 minutes.

To know more about wavelengths, click on the link

https://brainly.com/question/13533093#

#SPJ11

Transformers in three-phase systems must have a secondary winding connected as Y (start) to provide a neutral point for the connection of single-phase loads like homes and small businesses.

Transformers in three-phase systems must have a secondary winding connected as Y (start) to provide a neutral point for the connection of single-phase loads like homes and small businesses, which are common in local distribution networks. Y connection also provides better voltage regulation and improves system stability. On the other hand, ∆ connection doesn't have a neutral point and is not suitable for connecting single-phase loads. The Y connection also offers a balanced load distribution and better protection for the connected loads. This makes Y connection the preferred choice for transformers in distribution and local substations in three-phase systems.

Learn more about single-phase here

https://brainly.com/question/2844886

#SPJ4

Answer:
2.007 * 10^11 m/s, 19100.52m/s

Explanation:

Given data:

Electric field = 1.50 N/C

velocity of electron is 4.48 * 10^5 m/s

distance of point B from point A is 0.360 m

we know that acceleration of particle is given as

a) for electron: a = qE/m
= 1.6 * 10^-19 *1.50/9.1 * 10-31
= 4 * 10^-21
from equation of motion we have

v^2 = u^2 +2as
= (4.48 * 10^5)^2 + 2(4 * 10^-21 * 0.360)
≈ 2.007 * 10^11 m/s
Please verify my calculations lol

d=V/E=1.91×10^4/1.48

d=12905.4m

At point B

Distance=12905.4+0.360=12905.770

V=Ed=12905.760*1.48=19100.52m/s

It is indeed possible to view the moon in the third-quarter phase the day after a total lunar eclipse. The third quarter phase of the Moon is the phase that occurs two weeks after a new moon.

During this phase, the Moon appears half-illuminated, with the illuminated portion facing away from Earth. This is because the Moon is now located on the opposite side of the Earth from the Sun, with the Earth in the middle.   A total lunar eclipse occurs when the Moon passes through the Earth's shadow, causing it to appear dark. This usually occurs at the time of a full moon, when the Earth is directly between the Sun and the Moon. After a total lunar eclipse, the Moon is still located on the opposite side of the Earth from the Sun. Consequently, the Moon will still appear half-illuminated, and can thus be viewed in its third-quarter phase the day after a total lunar eclipse.

To know more about the lunar eclipse refer to the  link brainly.com/question/29775053

#SPJ4

No, the sky in Singapore and Malaysia rotates in the opposite direction from that in Fort Collins. Electric vehicles will undoubtedly be crucial in resolving the energy and environmental issues we are now facing.

However, it was discovered that one of the major problems with the launch strategy for EVs was the problem with EV charging station locations. While more influencing elements and restrictions must be taken into account while locating EV charging stations because EVs have some unique characteristics.  Any person who enjoys stargazing should be aware of how the sky changes as the stars rise in the east and set in the west. Looking north from the northern hemisphere, we can observe the sky moving against clockwise around the North Celestial Pole, which is close to Polaris.

Learn more about electric here-

https://brainly.com/question/2264542

#SPJ4

The wavelength of a fast-pitched baseball is much larger than the wavelength of an electron traveling at 1/10 the speed of light.

The wavelength of a fast-pitched baseball is measured in the range of meters, whereas the wavelength of an electron traveling at 1/10 the speed of light is in the range of nanometers. This is due to the very big difference in their speeds, as the speed of light is much greater than the speed of a pitched baseball.

The significance of this comparison is that it gives us the idea of how the difference in scale between macroscopic objects and subatomic particles. The wavelength of a pitched baseball is in the macroscopic range and can be observed with the normal eye, while the wavelength of an electron is in the subatomic range and can only be observed with advanced instrumentation, such as a transmission electron microscope.

To know more about wavelength, here

https://brainly.com/question/13533093

#SPJ4

The speed of the box when it reaches 10 cm from the equilibrium position is 4.28 m/s, if the mass of the box is 10 kg.

The mass of the box, m = 10 kg

Maximum amplitude of the spring, A = 44 cm = 0.44 m

Displacement of the box, x = 10 cm = 0.1 m

Let the velocity of the box, = v

Spring constant, K = 1000 N/m

By the law of conservation of energy,

0.5 mv² + 0.5 kx² = 0.5 kA²

0.5×10×v² + 0.5×1000×0.1² = 0.5×1000×0.45²

0.5×10×v² = 101.25 - 5

v² = 96.25/5 = 19.25

v = √19.25 = 4.387 m/s

--The given question is incomplete, the complete question is:

"a box of mass 10 kg attached to a spring is pulled to a maximum of 44 cm . the box is released. what is the speed when the box reaches a point 10 cm from the equilibrium position? the spring constant k = 1000 N/m."--

To know more about speed, here

https://brainly.com/question/28224010

#SPJ4

Answer:

A process named Chromatin remodeling enables the DNA to be stored in the nucleus of a tiny human cell.

Explanation:

The DNA, which is a 6ft long thread-like structure, can still be stored in the nucleus of a tiny human cell. A process known as chromatin remodeling allows a human cell's nucleus to condense and securely pack a 6ft long DNA strand. By coiling and folding the DNA molecule and attaching particular proteins called histones to the DNA, this enables the DNA to fit into the constrained space of the nucleus. A chromosome is a highly compressed structure created by coiling, folding, and histone attachment and may be seen under a microscope during cell division. The tiny nucleus of a human cell may accommodate the chromosome, a compact form of DNA.

The velocity of the two objects after the collision is 0.1535 m/s in south direction.

The law of conservation of momentum asserts that, unless an external force is applied, the total momentum of two or more bodies operating upon one another in an isolated system remains constant.

From the law of conservation of momentum, it can be written that:

Total initial momentum = total final momentum

19 kg × 4.2 m/s + 24 kg × (-3.6) m/s = (19 kg + 24 kg)× v

v = [19 kg × 4.2 m/s + 24 kg × (-3.6) m/s] ÷  (19 kg + 24 kg)

v = - 0.1535 m/s

Hence,  the velocity of the two objects after the collision is 0.1535 m/s in south direction.

Learn more about momentum here:

https://brainly.com/question/24030570

#SPJ1

Given the toy duck's average density (rhod) and volume (vd), we can determine its total mass (m): rhod * vd = m So the toy duck's mass is: 0.77 kg = m = 620 kg/m3 * 0.000125 m3.

The volume of the submerged toy duck in water may be computed as follows: Vsub = m / (rho - rhod) Where rho represents the density of water. 0.000125 m3 = Vsub = 0.77 kg / (1.0 x 103 kg/m3 - 620 kg/m3) As a result, the volume of the toy duck submerged in water equals the toy duck's overall volume. This indicates that the complete toy duck will float in water, with the proportion of its volume submerged equaling the overall volume. toy duck is floating on the water. the average density of the duck is rhod = 620 kg/m3, while the density of water is rho = 1.0 x 103 kg/m3. the volume of the duck is vd = 0.000125 m3.

learn more about water  here:

https://brainly.com/question/28465561

#SPJ4

Option C is correct. On the x-axis, there are three equal positive charges: one at the origin, one at x=2m, and a third at x=4m.

On the x-axis, there are three equally sized positive charges: the first is at the origin, the second is at x = 2, and the third is at x = 4 m. a. x = 1 mb. x = 3 mc. x = 5 md. The vertices of an equilateral triangle have three positive charges of equal value, q.F e is the electrostatic force exerted on the charge.

​=1.5×10 \s−3 \s N

The particle's charge is measured at q=1108 C.

F e = qE is the formula describing the relationship between the electrostatic force and the electric field resulting from a charge.

⇒E= \sq \sF \se

= \s1×10 \s−61.5×10 \s−3

=1.5×10 \s3 \s N/C.

Learn more about charges here-

https://brainly.com/question/30163160

#SPJ4

To convert 2.77 atm(Atmospheric Pressure) to torr, multiply 2.77 by 760, which gives us 2,108 torr.

Atmosphere (atm) and torr are both units of pressure measurement. Torr is a unit of pressure in the centimeter-gram-second (CGS) system, while atm is a unit of pressure in the International System of Units (SI).

The conversion from atm to torr involves multiplying the atm value by a conversion factor of 760. This is because 1 atm is equal to 760 torr.

To convert 2.77 atm to torr, multiply 2.77 by 760, which gives us 2,108 torr. It is important to keep in mind that these units are used in different systems of measurement, so it is important to know the correct conversion factor when converting between them. In conclusion, 2.77 atm is equal to 2,108 torr.

Learn more about Atmospheric Pressure:

brainly.com/question/28310375

#SPJ4

The weight of an object with a mass of 50kg is 490 N. The gravitational force of the earth on an object is referred to as its weight.

The gravitational constant on Earth is 9.81 N/Kg (Newtons per kilogram). You would weigh less standing on the Moon because it has around one-sixth the gravity of Earth. The gravitational constant on the moon is 1.622 N/Kg.

The amount of matter in a particle or object is represented by its mass, which is denoted by the symbol m. In the International System (SI), the kilogram serves as the default unit of mass (kg).

Given:

Mass (m) = 50 Kg

To find the weight of an object, you simply multiply its mass by the gravitational force.

m = 50kg; g = 9.8

Therefore:

w = mg

= 50 x 9.8

= 490 N

To know more about mass visit:

https://brainly.com/question/95275

#SPJ4

No, the average speed of a person does not necessarily mean that their speed was exactly 1.2 meters/second the whole time.

Average speed is calculated by dividing the total distance traveled by the total time elapsed. In simple words, Average speed is distance divided by the time interval for the distance traveled. So, if a person's speed varies over time, their average speed will be a reflection of all the different speeds they traveled at during that time period.

The average speed is not related to the maximum or minimum speed of a person. It's the measure of the average rate at which an object covers distance over time. It can be different from the maximum or minimum speed that an object has reached during that time.

To learn more about average speed,

https://brainly.com/question/6504879

The least count is 0.01 of voltmeter if the circuit element is 2.04 Voltz

The circular scale for a micrometre has 50 divisions, and the smallest division on the main scale is 0.5 mm. Using the formula L.C = 0.5/50 = 0.01mm, we can calculate the least count.

As a result, the smallest least count in metres is 0.1 cm or 1 mm.

A voltage metre also referred to as a voltage metre, is a device that gauges the voltage or potential difference existing between two points in an electrical or electronic circuit. Direct Current (DC) or Alternating Current (AC) circuits are typically the two types of circuits that the voltmeter is used for.

Millivolt, kilovolt, and volt are the voltmeter's measurement units. The three most common units are these three. One volt is equal to 1,000 kilovolts and 0.001 millivolts.

To learn more about least count please visit
https://brainly.com/question/30504992
#SPJ4