A 1.0 L buffer solution is 0.250 M HC2H3O2 and 0.050 M LiC2H3O2. Which of the following actions will destroy the buffer?

A. adding 0.050 moles of NaOH
B. adding 0.050 moles of LiC2H3O2
C. adding 0.050 moles of HC2H3O2
D. adding 0.050 moles of HCl
E. None of the above will destroy the buffer.

Answers

Answer 1

Answer:

D

Explanation:

Addition of 0.05 M HCl, will react with all of the C2H3O2- from LiAc which will give 0.05 M more HAc. So there will be no Acetate ion left to make the solution buffer. Hence, the correct option for the this question is d, which is adding 0.050 moles of HCl.

Answer 2

The action that destroys the buffer is option c. adding 0.050 moles of HCl.

What is acid buffer?

It is a solution of a weak acid and salt.

Here, The buffer will destroy at the time when either HC2H3O2 or NaC2H3O2 should not be present in the solution.

The addition of equal moles of HCl finishly reacts with equal moles of NaC2H3O2. Due to this,  there will be only acid in the solution.

Since

moles of HC2H3O2 = 1*0.250 = 0.250

moles of NaC2H3O2 = 1*0.050 = 0.050.

moles of HCl is added = 0.050

Now

The reaction between HCl and NaC2H3O2

[tex]HCl + NaC_2H_3O_2 \rightarrow HC_2H_3O_2 + NaCl[/tex]

Now

BCA table is

            NaC2H3O2  HCl       HC2H3O2

Before 0.050 0.050 0.250

Change -0.050 -0.050 +0.050

After 0 0 0.300

Now, the solution contains the acid (HC2H3O2 ) only.

Therefore addition of 0.050 moles of HCl will destroy the buffer.

Learn more about moles here: https://brainly.com/question/24817060


Related Questions

g . Calculate the molar concentration for each of the following solutions. (a) 1.50 g NaCl in 100.0 mL of solution (b) 1.50 g K2Cr2O7 in 100.0 mL of solution (c) 5.55 g CaCl2 in 125 mL of solution (d) 5.55 g Na2SO4 in 125 mL of solution

Answers

Answer:

(a) [tex]M=0.257M[/tex]

(b) [tex]M=0.0510M[/tex]

(c) [tex]M =0.500M[/tex]

(d) [tex]M= 0.391M[/tex]

Explanation:

Hello,

In this case, since the molarity or molar concentration of a solution is computed by dividing the moles of solute by the volume of solution in liters, we proceed as follows:

(a) The molar mass of sodium chloride is 58.45 g/mol and the volume in liters is 0.100 L, therefore, the molarity is:

[tex]M=\frac{1.50gNaCl}{0.100L} *\frac{1molNaCl}{58.45gNaCl} =0.257M[/tex]

(b) The molar of potassium dichromate is 294.2 g/mol and the volume in liters is 0.100 L, therefore, the molarity is:

[tex]M=\frac{1.50gK_2Cr_2O_7}{0.100L} *\frac{1molK_2Cr_2O_7}{294.2gK_2Cr_2O_7} =0.0510M[/tex]

(c) The molar of calcium chloride is 111 g/mol and the volume in liters is 0.125 L, therefore, the molarity is:

[tex]M=\frac{5.55gCaCl_2}{0.100L} *\frac{1molCaCl_2}{111gCaCl_2} =0.500M[/tex]

(d) The molar of sodium sulfate is 142 g/mol and the volume in liters is 0.125 L, therefore, the molarity is:

[tex]M=\frac{5.55gNa_2SO_4}{0.100L} *\frac{1molNa_2SO_4}{142gNa_2SO_4} = 0.391M[/tex]

Best regards.

Determine whether each chemical substance would remain the same color or turn pink in the presence of phenolphthalein.

Answers

Answer:

See the answer below

Explanation:

The complete question can be seen in the attached image.

Phenolphthalein is an indicator that is often utilized in an acid-base reaction to indicate the endpoints of such reactions due to its ability to change color from pink/colorless to colorless/pink depending on if the final solution is acidic or basic.

Phenolphthalein is usually colorless in acidic solutions and appears pink in basic solutions. The more basic or alkaline a solution is, the stronger the pink color of phenolphthalein. Hence;

1. Ammonia with a pH of 11 is basic, phenolphthalein will turn pink.

2. Battery acid with a pH of 1 is acidic, it will remain colorless.

3. Lime juice with a pH of 2 is acidic, it will remain colorless.

4. Mashed avocado with a pH of 6.5 is acidic, it will remain colorless.

5. Seawater with a pH of 8.5 is basic, it will turn pink.

6. Tap water with a pH of 7 is neutral, it will remain colorless

Phenolphthalein is a chemical compound with the formula[tex]C_{20}H_{14}O_4[/tex]. Phenolphthalein is often used as an indicator in acid-base titrations. For this application, it turns colorless in acidic solutions and pink in basic solutions

Phenolphthalein works as in:-

Colorless in acidPink in base

According to the question, There are 5 solutions having different ph and the indication only turns basic solution to pink

The indicator only turn the basic solution pink and these solutions are as follows,

AmmoniaSea waterTap water.

Hence, these are the answer.

For more information, refer to the link:-

If there are a 1000 ml per 1 L and a 1000g per kilogram
a. How many ml are there in 5.0 L?
b. How many kg are there in 230g?

Answers

Answer:

hbchbjH j jas a aa  a s ds d as das

Explanation:

The solubility of calcium oxalate, CaC2O4, in pure water is 4.8 × 10‑5 moles per liter. Cal­culate the value of Ksp for silver carbonate from this data.

Answers

Answer:

2.3 × 10⁻⁹

Explanation:

Step 1: Write the reaction for the solution of calcium oxalate

CaC₂O₄(s) ⇄ Ca²⁺(aq) + C₂O₄²⁻(aq)

Step 2: Make an ICE chart

We can relate the molar solubility (S) with the solubility product constant (Ksp) through an ICE chart.

        CaC₂O₄(s) ⇄ Ca²⁺(aq) + C₂O₄²⁻(aq)

I                                0                 0

C                              +S               +S

E                                S                 S

The solubility product constant is:

Ksp = [Ca²⁺] × [C₂O₄²⁻] = S² = (4.8 × 10⁻⁵)² = 2.3 × 10⁻⁹

The density of concentrated nitric acid (HNO3) is 1.413 g/mL. What volume in liters would be occupied by a mass of 47.2 g?

Answers

Answer:

The volume that a mass of 47.2 g would occupy is 0.0334 L

Explanation:

Density is the property that matter, whether solid, liquid or gas, has to compress into a given space. Density is defined as the amount of mass it has per unit volume, that is, the ratio between the mass of a body and the volume it occupies:

[tex]Density=\frac{mass}{volume}[/tex]

This indicates that density is inversely proportional to volume: the smaller the volume occupied by a given mass, the higher the density.

In this case:

density= 1.413 g/mLmass= 47.2 gvolume=?

Replacing:

[tex]1.413 \frac{g}{mL}=\frac{47.2 g}{volume}[/tex]

Solving:

[tex]volume=\frac{47.2 g}{1.413\frac{g}{mL} }[/tex]

volume=33.40 mL

Being 1,000 mL= 1 L:

volume= 0.0334 L

The volume that a mass of 47.2 g would occupy is 0.0334 L

Describe how you would prepare 500ml of 40% (w/v) aqueous iodine solution.
[Atomic mass of iodine =127g/mol].​

Answers

Answer:

- Weight 333.3 grams of iodine.

- Measure 500 mL of water.

- Vigorously mix the resulting solution.

Explanation:

Hello,

In this case, since 500 mL of a 40% (w/v) aqueous solution iodine is required, we can compute the required mass of iodine by defining the given mass-volume percent:

[tex]\% w/v=\frac{m_{iodine}}{m_{solution}} *100%=\frac{m_{iodine}}{m_{water}+m_{iodine}} *100%[/tex]

In such a way, we need to find mass of iodine, which is computed as:

[tex]m_{iodine}=\frac{\%w/v*m_{water}}{100w/v-\%} \\\\m_{iodine}=\frac{40*500}{100-40}\\ \\m_{iodine}=333.3g\\[/tex]

Thereby, the procedure will be:

- Weight 333.3 grams of iodine.

- Measure 500 mL of water.

- Vigorously mix the resulting solution.

Best regards.

A sample of carbon dioxide gas has a density of g/L at a pressure of 0.889 atm and a temperature of 55.0 °C. Assume ideal behavior,occupies a volume of 686 mL. If the gas is heated at constant pressure until its volume is 913 mL, the temperature of the gas sample will be:_______ ? °C.

Answers

Answer:

163.5 °C

Explanation:

The following data were obtained from the question:

Initial volume (V1) = 686 mL.

Initial temperature (T1) = 55 °C.

Final volume (V2) = 913 mL

Initial pressure (P1) = final pressure (P2) = 0.889 atm

Final temperature (T2) =.?

Next, we shall convert celsius temperature to Kelvin temperature.

This can be done as shown below:

Temperature (K) = Temperature (°C) + 273

T(K) = T (°C) + 273

Initial temperature (T1) = 55 °C.

Initial temperature (T1) = 55 °C + 273

Initial temperature (T1) = 328 K

Next, we shall determine the new temperature of the gas.

Since the pressure is constant, we shall determine the new temperature as follow:

V1/T1 = V2 /T2

Initial volume (V1) = 686 mL.

Final volume (V2) = 913 mL

Initial temperature (T1) = 328 K

Final temperature (T2) =.?

V1/T1 = V2 /T2

686/328 = 913/T2

Cross multiply

686 x T2 = 328 x 913

Divide both side by 686

T2 = (328 x 913)/686

T2 = 436.5 K

Finally, we shall convert Kelvin temperature to celsius temperature.

This can be done as shown below:

Temperature (°C) = Temperature (K) – 273

T (°C) = T(K) – 273

T(K) = 436.5 K

T (°C) = 436.5 – 273

T (°C) = 163.5 °C

Therefore, the temperature of the gas sample is 163.5 °C.

What happens when an atom of sulfur combines with two atoms of chlorine to produce SCl2?

Answers

Answer:

Each chlorine atom shares a pair of electrons with the sulfur atom. ... Each chlorine atom shares all its valence electrons with the sulfur atom

Check 0/1 ptRetries 5 Element R has three isotopes. The isotopes are present in 0.0825, 0.2671, and 0.6504 relative abundance. If their masses are 97.62, 109.3, and 138.3 respectively, calculate the atomic mass of element R.

Answers

Answer:

Atomic mass = 127.198 amu

Explanation:

The average atomic mass is obtained by summing the masses of the isotopes each multiplied by its abundance.

Atomic mass = (97.62 * 0.0825) + (109.3 * 0.2671) + (138.3 * 0.6504)

Atomic mass = 8.05365 +  29.19403 + 89.95032

Atomic mass = 127.198 amu

How many dozen (dz) eggs are needed to make 12 muffins? What about 15.5
muffins? (hint cross out units first) *

Answers

Answer:

I think its 1.2 cause I divided 15.5 with 12 and got 1.2 as an answer

Should be 1.2 I divided and got 1.2

3. What is the mass of an object with a volume of 4 L and a density of 1.25 g/mL?

Answers

Answer:

5000g

Explanation:

mass= density × volume

Since the unit of density here is g/mL, we need to convert the volume to mL.

1L= 1000mL

4L= 4 ×1000 = 4000 mL

Mass of object

= 1.25 ×4000

= 5000g

Answer:

5,000 grams

Explanation:

The mass of an object can be found by multiplying the volume by the density.

mass= volume * density

The density is 1.25 g/mL and the volume is 4 L.

First, we must convert the volume to mL. The density is given in grams per milliliter, but the volume is given in liters.

There are 1,000 mL per L. The volume is 4 L. Therefore, we can multiply 4 and 1,000.

4 * 1,000 = 4,000

The volume is 4,000 mL.

Now, find the mass of the object.

mass= volume * density

volume = 4,000

density= 1.25

mass= 4,000 * 1.25 = 5,000

Add the appropriate units for mass, in this case, grams, or g.

mass= 5,000 g

The mass of the object is 5,000 grams.

Which of the following is a salt that will form from the combination of a strong base with a weak acid?

Select the correct answer below:
A. NaHCO3
B. H2O
C. CH3CO2H
D. NH4Cl

Answers

Answer:

A. NaHCO₃

Explanation:

NaHCO₃ ⇒ NaOH + H₂CO₃

NaOH is a strong base and H₂CO₃ is a weak acid. Therefore, NaHCO₃ is a salt of a strong base-weak acid reaction. The salt is basic because carbonic acid (H₂CO₃) is a weak acid so it remains undissociated. So, there is a presence of additional OH⁻ ions that makes the solution basic.

Hope that helps.

11mg of cyanide per kilogram of body weight is lethal for 50% of domestic chickens. If a chicken weighs 3kg, how many grams of cyanide would it need to ingest to kill 50% of domestic chickens?

Answers

Answer:

[tex]0.033g[/tex]

Explanation:

Hello,

In this case, since 11 mg per kilogram of body weight has the given lethality, the mg that turn out lethal for a chicken weighting 3 kg is computed by using a rule of three:

[tex]11mg\longrightarrow 1kg\\\\?\ \ \ \ \ \ \longrightarrow 3kg[/tex]

Thus, we obtain:

[tex]?=\frac{3kg*11mg}{1kg}\\ \\?=33mg[/tex]

That in grams is:

[tex]=33mg*\frac{1g}{1000mg} \\\\=0.033g[/tex]

Regards.

1. What volume in milliliters of 0.100 M HClO₃ is required to neutralize 40.0 mL of 0.140 M KOH? 2. A 25.0 mL solution of HNO₃ is neutralized with 15.7 mL of 0.250 M Ba(OH)₂. What is the concentration of the original HNO₃ solution?

Answers

Answer:

The correct answer is 1) 56 ml and 2) 0.314 M

Explanation:

1. The reaction taking place in the given case is,  

HClO₃ + KOH ⇒ KClO₃ + H2O, the molarity of HClO₃ given is 0.100 M, the molarity of KOH given is 0.140 M and the volume of KOH given is 40 ml, there is a need to find the volume of HClO₃.  

Therefore, the mole of HClO₃ = mole of KOH

= MHClO₃ × VHClO₃ = MKOH × VKOH

= 0.100 M × VHClO₃ = 0.140 M × 40 ml

VHClO₃ = 0.140 M × 40 ml/0.100 M

VHClO₃ = 56 ml.  

2. The reaction taking place is,  

2HNO₃ + Ba(OH)₂ ⇒ Ba(NO₃)₂ + 2H₂O

The volume of HNO₃ given is 25 ml, the molarity of Ba(OH)2 is 0.250 M, the volume of Ba(OH)2 is 15.7 ml, the n or the number of moles of HNO₃ is 2, and the n of Ba(OH)2 is 1, the concentration or M of HNO₃ is,  

M₁V₁/n₁ = M₂V₂/n₂

M₁ × 25/ 2 = 0.25 × 15.7/1

M₁ or molarity of HNO₃ = 0.314 M

1. The volume of HClO₃ required to neutralize the KOH is 56.0 mL

2. The concentration of the original HNO₃ solution is 0.314 M

1.

First, we will write a balanced chemical equation for the reaction

The balanced chemical equation for the reaction is

HClO₃ + KOH → KClO₃ + H₂O

This means,

1 mole of HClO₃ is required to neutralize 1 mole of KOH

From the titration formula

[tex]\frac{C_{A}V_{A} }{C_{B}V_{B}} = \frac{n_{A}}{n_{B}}[/tex]

Where

[tex]C_{A}[/tex] is the concentration of acid

[tex]C_{B}[/tex] is the concentration of base

[tex]V_{A}[/tex] is the volume of acid

[tex]V_{B}[/tex] is the volume of base

[tex]n_{A}[/tex] is the mole ratio of acid

[tex]n_{B}[/tex] is the mole ratio of base

From the given information,

[tex]C_{A} = 0.100 \ M[/tex]

[tex]C_{B} = 0.140 \ M[/tex]

[tex]V_{B} = 40.0 \ mL[/tex]

From the balanced chemical equation

[tex]n_{A} = 1[/tex]

[tex]n_{B} =1[/tex]

Putting the values into the formula, we get

[tex]\frac{0.100 \times V_{A} }{0.140 \times 40.0} = \frac{1}{1}[/tex]

∴ [tex]0.100 \times V_{A} = 0.140 \times 40.0[/tex]

[tex]V_{A}=\frac{0.140\times 40.0}{0.100}[/tex]

[tex]V_{A}=\frac{5.60}{0.100}[/tex]

[tex]V_{A}=56.0 \ mL[/tex]

Hence, the volume of HClO₃ required to neutralize the KOH is 56.0 mL

2.

First, we will write the balanced chemical equation for the reaction

The balanced chemical equation for the reaction is

2HNO₃ + Ba(OH)₂ → Ba(NO₃)₂ + 2H₂O

This means, 2 mole of HNO₃ is required to neutralize 1 mole Ba(OH)₂  

From the given information,

[tex]V_{A} = 25.0\ mL[/tex]

[tex]C_{B} = 0.250 \ M[/tex]

[tex]V_{B} = 15.7 \ mL[/tex]

From the balanced chemical equation

[tex]n_{A} = 2[/tex]

[tex]n_{B} =1[/tex]

Also, Using the titration formula

[tex]\frac{C_{A}V_{A} }{C_{B}V_{B}} = \frac{n_{A}}{n_{B}}[/tex]

We get

[tex]\frac{C_{A} \times 25.0 }{0.250 \times 15.7} = \frac{2}{1}[/tex]

Then,

[tex]C_{A} = \frac{2\times 0.250 \times 15.7} {1 \times 25.0}[/tex]

[tex]C_{A} =\frac{7.85}{25.0}[/tex]

[tex]C_{A} =0.314 \ M[/tex]

Hence, the concentration of the original HNO₃ solution is 0.314 M

Learn more here: https://brainly.com/question/16870772

Use the following equation to determine the charge on bromine when it dissociates from sodium and determine whether it is being oxidized or reduced: Cl2 + NaBr -> NaCl + Br2A. It starts with a charge of 0 and is oxidized. B. It starts with a charge of -1 and is reduced. C. It starts with a charge of 0 and is reduced. D. It starts with a charge of -1 and is oxidized.

Answers

It starts with a charge of 0 and is oxidized. Hence, option A is correct.

What is a chemical equation?

A chemical reaction is a representation of symbols of the elements to indicate the number of substances and moles of reactant and product.

[tex]Cl_2 + NaBr[/tex] ->[tex]NaCl + Br_2[/tex]

The oxidation number of bromine changes from -1 (in  NaBr) to 0 (in Br

2). Thus, NaBr is oxidized.

The oxidation number of chlorine changes from 0 to -1. Thus, chlorine is reduced.

Hence, option A is correct.

Learn more about chemical equations here:

brainly.com/question/20492533

#SPJ5

There are 2.4g of calcium hydroxide reacted with nitric acid. Calculate the number of moles of calcium hydroxide used. Write your answer using proper significant digits and units. Show all your work.

Answers

Answer:

0.032 moles

Explanation:

no of moles =

[tex] \frac{mass \: in \: grams}{relative \: molecular \: mass} [/tex]

=

[tex] \frac{2.4}{40 + 32 + 2} [/tex]

= 0.032

Calcium hydroxide reacted with nitric acid the total number of moles will be 0.032 moles.

What is a mole?

A mole is Avogadro's number of particles, which is exactly 6.02214076×1023.

The mole is widely used in chemistry as a convenient way to express amounts of reactants and products of chemical reactions. For example, the chemical equation 2H2 + O2 → 2H2O can be interpreted to mean that for each 2 mol dihydrogen (H2) and 1 mol dioxygen (O2) that react 2 mol of water (H2O) form.

Number of moles = Mass of substance / Mass of one mole Number of moles

mass of substance = 2.4g

molar mass of calcium hydroxide is  (1 ×40.078g/mol Ca) +(2 × 15.999g/mol O) + (2 × 1.008g/mol H) = 74.092 g/mol Ca (OH)2

substituting the value,

number of moles = 2.4 / 74.029

                          = 0.032 moles

Therefore, moles of calcium hydroxide will be 0.032 moles

Learn more about moles, here :

https://brainly.com/question/15209553

#SPJ2

Emission of which one of the following leaves both atomic number and mass number unchanged?
(a) positron
(b) neutron
(c) alpha particle
(d) gamma radiation
(e) beta particle

Answers

Answer: Gamma Radiation

Explanation:

The emission of Gamma rays does not cause a change in both the atomic and mass number. They are  electromagnetic radiation.

The radiations that leaves without changing the atomic mass and atomic number of the particle have been gamma radiations. Thus, option D is correct.

Radiations have been the energy that has been evolved by the particles during energy transitions. The nuclear decay results with the release of the energy from the particle resulting in the change in the atomic mass.

The electromagnetic radiations have been capable of emitting the radiation without changing the mass and atomic number of the element. The gamma radiations have been the electromagnetic radiations. Thus, option D is correct.

For more information about the emissions, refer to the link:

https://brainly.com/question/517329

Gaseous methane (CH4) will react with gaseous oxygen (O2) to produce gaseous carbon dioxide (CO) and gaseous water (H2O) . Suppose 0.963 g of methane is mixed with 7.5 g of oxygen. Calculate the minimum mass of methane that could be left over by the chemical reaction. Be sure your answer has the correct number of significant digits.

Answers

Answer:

0 g.

Explanation:

Hello,

In this case, since the reaction between methane and oxygen is:

[tex]CH_4+2O_2\rightarrow CO_2+2H_2O[/tex]

If 0.963 g of methane react with 7.5 g of oxygen the first step is to identify the limiting reactant for which we compute the available moles of methane and the moles of methane consumed by the 7.5 g of oxygen:

[tex]n_{CH_4}=0.963gCH_4*\frac{1molCH_4}{16gCH_4}=0.0602molCH_4\\ \\n_{CH_4}^{consumed}=7.5gO_2*\frac{1molO_2}{32gO_2}*\frac{1molCH_4}{2molO_2} =0.117molCH_4[/tex]

Thus, since oxygen theoretically consumes more methane than the available, we conclude the methane is the limiting reactant, for which it will be completely consumed, therefore, no remaining methane will be left over.

[tex]left\ over=0g[/tex]

Regards.

PLEASE HELP WILL GIVE BRAINLIEST!!!
Refining aluminum takes place in steel vats lined with graphite. What function does the graphite lining serve?
A. It is the cathode.
B. It is the anode.
C. It soaks up the waste oxygen released from bauxite (Al2O3)
D. It serves as a grounding layer to prevent electrical surges.

Answers

Answer: It's the anode broski (B)

Explanation: I'm taking the Chem summer course too broski, this was the correct answer. Cheers broski

Which of the following buffer systems would be the best choice to create a buffer with pH 9.10?
a) HF/KF (pKa = 3.14)
HNO2/KNO2 (pKa = 3.39)
NH3/NH4Cl (pKa = 9.25)
HClO/KClO (pKa = 7.46)
b) for the best buffer system, calculate the ratio of the molarities of the buffer components required to make the buffer
c) for the best buffer system, calculate the ratio of the masses of the buffer components required to make 1.00 L of the buffer

Answers

Answer:

a) NH3/NH4Cl (pKa = 9.25)

b) [tex]\frac{[Base]}{[Acid]} =0.708[/tex]

c)

Explanation:

Hello,

a) In this case, for a buffering capacity, if we want to select the best buffer, we should ensure that the buffer's pKa approaches the desired pH, therefore, since the buffer NH3/NH4Cl has a pKa of 9.25 that is very close to the desired pH of 9.10, we can pick it as the best choice.

b) In this case, we use the Henderson-Hasselbach equation in order to compute the molar ratio:

[tex]pH=pKa+log(\frac{[Base]}{[Acid]} )\\\\log(\frac{[Base]}{[Acid]} )=9.10-9.25=-0.15\\\\\frac{[Base]}{[Acid]} =10^{-0.15}\\\\\frac{[Base]}{[Acid]} =0.708[/tex]

c) Finally, for the ratio of masses, we use the molar mass of both ammonia as the base (17 g/mol) and ammonium chloride as the acid (53.45 g/mol) to compute it, assuming 1.00 L as the volume of the solution:

[tex]\frac{m_{Base}}{m_{Acid}} =0.708\frac{molBase}{molAcid}*\frac{17gBase}{1molBase} *\frac{1molAcid}{53.45gAcid}\\ \\\frac{m_{Base}}{m_{Acid}} =0.225[/tex]

Regards.

The best choice to create a buffer with pH 9.10 is NH₃/NH₄Cl (pKa=9.25), ratio of molarities and masses for NH₃/NH₄Cl are 0.708 & 0.225 respectively.

How do we calculate the pH of buffer solution?

pH of buffer solution will be calculated by using the Henderson Hasselbalch equation as:

pH = pKa + log([base]/[acid])

From the above reaction it is clear that valu of pH is directly proportional to the value of pKa. So, the pKa value for NH₃/NH₄Cl is comparatively high which will close to the 9.10 pH.Ratio of the molarities for the NH₃/NH₄Cl buffer solution will be calculated by using the Henderson Hasselbalch equation as:

        log([NH₃]/[NH₄Cl]) = 9.10 - 9.25 =

        log([NH₃]/[NH₄Cl]) = -0.15

       [NH₃]/[NH₄Cl] = [tex]10^{-0.15}[/tex] = 0.708

Ratio of masses for the NH₃/NH₄Cl buffer solution will be calculated by using the below equation as:

        M = n/V, where

        M = molarity

        V = volume = 1L

        n = moles = W(mass) / M(molar mass)

        Mass(NH₃)/Mass(NH₄Cl) = 0.708 {(mol of NH₃×17g of NH₃NH₃) /          

                                                              (mol of NH₄Cl×53.45g of NH₄Cl)

       Mass(NH₃)/Mass(NH₄Cl) = 0.225

Hence required values are calculated above.

To know more about Henderson Hasselbalch equation, visit the below link:
https://brainly.com/question/13651361

Calculate the energy required to heat 566.0mg of graphite from 5.2°C to 23.2°C. Assume the specific heat capacity of graphite under these conditions is ·0.710J·g−1K−1 . Be sure your answer has the correct number of significant digits.

Answers

Answer:

7.23 J

Explanation:

Step 1: Given data

Mass of graphite (m): 566.0 mgInitial temperature: 5.2 °CFinal temperature: 23.2 °CSpecific heat capacity of graphite (c): 0.710J·g⁻¹K⁻¹

Step 2: Calculate the energy required (Q)

We will use the following expression.

Q = c × m × ΔT

Q = 0.710J·g⁻¹K⁻¹ × 0.5660 g × (23.2°C-5.2°C)

Q = 7.23 J

At standard temperature and pressure conditions, the volume of an ideal gas contained in a jar is 55.3 L. How many molecules are in the jar. This question is to be answered in scientific notation.(eg. 1.5 e5)

Answers

Answer:

1.49e24

Explanation:

Standars temperature and pressure are 273.15K and 1atm, respectively.

Using ideal gas law, we can find moles of an ideal gas if we know its pressure, temperature and volume as follows:

PV = nRT

PV / RT = n

Where P is pressure (1atm), V is volume (55.3L), R is gas constant (0.082atmL/molK), T is temperature (273.15K) and n moles of the ideal gas.

Replacing:

PV / RT = n

1atm*55.3L / 0.082atmL/molK*273.15K = n

2.47 moles = n

Now, the question is about the number of molecules in the jar. By definition, 1 mole = 6.022x10²³ molecules.

As we have 2.47 moles:

2.47 mol × (6.022x10²³ molecules / 1 mole) =

1.49x10²⁴ molecules that are in the jar

In scientific notation:

1.49e24

When 91.96g of Na reacts with 32.o g of O2 how many grams of NaO2 are produced

Answers

Answer:

123.96 g Na₂O

Explanation:

4 Na  +  O₂  ⇒  2 Na₂O

You first need to find the limiting reagent.  Convert the reactants to moles and see which produces the least amount of product using the mole ratios in the chemical equation.

(91.96 g Na)/(22.99 g/mol Na) = 4 mol Na

(4 mol Na) × (2 mol Na₂O/4 mol Na) = 2 mol Na₂O

(32.0 g O₂)/(32.0 g/mol) = 1 mol O₂

(1 mol O₂) × (2 mol Na₂O/1 mol O₂) = 2 mol Na₂O

Since they both produce the same amount of product, you don't need to pick a limiting reagent.  Now, convert moles of Na₂O to grams.

(2 mol Na₂O) × (61.98 g/mol Na₂O) = 123.96 g Na₂O

NEED HELP ASAP
In 1988, three gray whales were trapped in Arctic ice. Television crews captured the frantic
attempts of hundreds of people to save the whales. Eventually, a Soviet icebreaker and U.S.
National Guard helicopters arrived to help free the whales. The cost of the rescue mission
exceeded $5 million.
i. Write a scientific question related to the whale story. (1 point)

Answers

How much was the cost for rescuing each whale?

The condition that a reaction takes place without outside help Choose... Solution in which no more solute can be dissolved in the solvent Choose... Difference of the enthalpy (of a system) minus the product of the entropy and absolute temperature Choose... The extent of randomness in a system Choose... Sum of the internal energy plus the product of the pressure and volume for a reaction

Answers

Answer:

Difference of the enthalpy (of a system) minus the product of the entropy and absolute temperature

Explanation:

The basis of spontaneity in a chemical reaction is that ∆G must be negative. ¡∆G is known as the change in free energy of a system. If ∆G is negative, then the reaction will occur without any external help (the reaction is spontaneous at room temperature).

∆G is given by;

∆G= ∆H -T∆S

Where;

∆H= change in enthalpy of the system

T= absolute temperature of the system

∆S= change in entropy

Hence; when ∆H -T∆S gives a negative result, the reaction proceeds without any external help.

243
Am
95
1. The atomic symbol of americium-243 is shown. Which of the following is correct?
• A. The atomic mass is 243 amu, and the atomic number is 95.
B. The atomic mass is 338 amu, and the atomic number is 95.
• C. The atomic mass is 95 amu, and the atomic number is 243.
D. The atomic mass is 243 amu, and the atomic number is 338.​

Answers

Answer:

A. The atomic mass is 243 amu, and the atomic number is 95.

Without doing any calculations, determine the sign of ΔSsys for each of the following chemical reactions. Drag the appropriate items to their respective bins.
1. 2H30' (aq) + CO23- (aq) - CO2(g) +3H2O(1)
2. CH4(g) + 202,(g) - CO2(g) + 2H2O(l)
3. Mg (s) + Cl2(g) - MgCǐ2(s)
4. SO3(g) + H2O(I) - H2SO4(I)
A. ΔSsys greater than
B. ΔSsys smaller than

Answers

Answer:

Answers are in the explanation.

Explanation:

In a chemical reaction we can determine the sign of ΔSsys based on the states of products and reactants knowing that:

Entropy of gases >>> entropy of liquid > entropy of solids.

The entropy of solids is lower than entropy of liquids that is lower than entropy of gases.

In the reactions:

1. 2H₃O⁺(aq) + CO₃²⁻(aq) → CO₂(g) +3H₂O(l)

As 1 gas is produced, entropy of products is higher than entropy of reactants. That means  ΔSsys > 0 (That because ΔSsys is ΔSProducts - ΔSReactants)

2. CH₄(g) + 2O₂(g) → CO₂(g) + 2H₂O(l)

3 moles of gas are converted in 1 mole of gas in products. Entropy of reactants is higher than entropy of products, ΔSsys < 0.

3. Mg(s) + Cl₂(g) → MgCǐ₂(s)

You have 1 mole of gas in reactants and 1 mole of solid in products. ΔSProducts <<< ΔSReactants. ΔSsys < 0.

4. SO₃(g) + H₂O(I) → H₂SO₄(I)

1 mole of gas in reactants, a liquid in products. ΔSProducts <<< ΔSReactants. ΔSsys < 0.

Determining the sign of ΔSsys for each given chemical reaction, the following can be obtained without calculations:

1. ΔSsys > 0.

2. ΔSsys < 0

3. ΔSsys < 0

4. ΔSsys < 0

Recall:

The states of the reactants and the products in a chemical reaction determines the sign of ΔSsys of the reaction.The entropy of gasses is greater than the entropy of liquid and solids.The entropy of solids is less than the entropy of liquid and gasses.Gasses have the highest entropy, while solids have the least.

Thus:

In the first chemical reaction, 1 mole of gas is produced, therefore: ΔSsys > 0.

In the second chemical reaction, 3 moles of gasses gives a products of 1 mole of gas, therefore: ΔSsys < 0.

In the third chemical reaction, 1 mole of gas gives 1 mole of solid as product, therefore: ΔSsys < 0.

In the fourth chemical reaction, 1 mole of gas gives 1 mole of liquid as product, therefore: ΔSsys < 0.

Learn more here:

https://brainly.com/question/1218700

A certain covalent compound is named sulfur hexafluoride. What's the chemical formula for this compound? A. F6S2 B. F6S C. S2F6 D. SF6

Answers

Answer: The sulphur hexafluoride will have a chemical formula of [tex]SF_6[/tex]

Explanation:

A covalent compound is a compound where the sharing of electrons takes place between two elements which are non-metals.

The naming of covalent compound is given by:

1. The less electronegative element is written first.

2. The more electronegative element is written second. Then a suffix is added with it. The suffix added is '-ide'.

3. If atoms of an element is greater than 1, then prefixes are added which are 'mono' for 1 atom, 'di' for 2 atoms, 'tri' for 3 atoms and so on.

Thus sulphur hexafluoride will have a chemical formula of [tex]SF_6[/tex]

Answer:

D. sf6

Explanation:

A solution containing a unknown ionic compound, vigorously bubbles when hydrochloric acid (HCl) is added to the solution. This might indicate that the solution contains which anion?

Answers

Answer:

CO3^2-

Explanation:

In qualitative analysis, we try to use chemical reactions to determine the composition of an unknown substance. The addition of certain reagents to the unknown solution gives certain results that show the presence or absence of certain species from the unknown sample.

When dilute HCl is added to an unknown sample and effervescence is observed, then the unknown sample must contain CO3^2- or HCO3^-. The presence of these species is confirmed if the gas evolved is passed through limewater and the gas turns limewater milky.

a) Provide equation of K of this reaction, use symbol " ^ " for exponents. That means 1000 = 10^3 and 1/100 is 10^(-2). b) How many moles of compound F will be produced if only 2 moles of compound C is available? describe or show your work. 3 A + 5 B +4 C 5 D +7 E + F

Answers

Answer and Explanation:

a. The equation of K of this reaction is shown below:-

3 A + 5 B + 4 C↔5 D + 7 E + F

[tex]K = \frac{(D)^5 (E)^7 (F)}{(A)^3 (B)^5 (C)^4}[/tex]

b. The moles of compound F is shown below:-

3 A + 5 B + 4 C↔5 D + 7 E + F

               2 moles

Now, the mole of produced is

[tex]= \frac{1}{4} \times \ moles\ of\ c[/tex]

Now, we will the value of c by using the above equation

[tex]= \frac{1}{4} \times 2[/tex]

After solving the above equation we will get

0.5 moles

Other Questions
Will Give Brainliest, Answer ASAP mO = mN = the length of a basketball pitch can be divided into 12 parts which 25 centimetres on how much parts it's 20 centimetres long can be obtained from the pitch Modernity has largely led to the collapse of strong marital ties and subsequently affected the choice of mates. Critically provide a four (4)- point coherent and logical underpinnings to prove the truth or otherwise of this statement. Public assembly facilities have existed since A. medieval times. B. the early 1900s. C. ancient times. D. the invention of baseball in the Elysian fields of the 1840s. Find the constant of proportionality (r) in the equation y = r x Help me filling the blanks using correct preposition.Iam confused in A and B optionsa] The children are playing ______the tree.b] There is a bicycle ______ the children.c] There are three apples ____the table.d] There is a dog _______ the table.e] Some birds are flying ____the sky. Which is the most common form of democracy in todays world? Read the Greek myth "Midas" retold by Thomas Bulfinch and answer the question. [1] Bacchus, on a certain occasion, found his old schoolmaster and foster-father, Silenus, missing. The old man had been drinking, and in that state wandered away, and was found by some peasants, who carried him to their king, Midas. Midas recognized him, and treated him hospitably, entertaining him for ten days and nights with an unceasing round of jollity. [2] On the eleventh day he brought Silenus back, and restored him in safety to his pupil. Whereupon Bacchus offered Midas his choice of a reward, whatever he might wish. He asked that whatever he might touch should be changed into gold. Bacchus consented, though sorry that he had not made a better choice. [3] Midas went his way, rejoicing in his new-acquired power, which he hastened to put to the test. He could scarce believe his eyes when he found a twig of an oak, which he plucked from the branch, become gold in his hand. He took up a stone; it changed to gold. He touched a sod; it did the same. He took up an apple from the tree; you would have thought he had robbed the garden of the Hesperides. His joy knew no bounds, and as soon as he got home, he ordered the servants to set a splendid repast on the table. Then he found to his dismay that whether he touched bread, it hardened in his hand; or put a morsel to his lip, it defied his teeth. He took a glass of wine, but it flowed down his throat like melted gold. [4] In consternation at the unprecedented affliction, he strove to divest himself of his power; he hated the gift he had lately coveted. But all in vain; starvation seemed to await him. He raised his arms, all shining with gold, in prayer to Bacchus, begging to be delivered from his glittering destruction. Bacchus, merciful deity, heard and consented. "Go," said he, "to River Pactolus, trace its fountain-head, there plunge yourself and body in, and wash away your fault and its punishment." He did so, and scarce had he touched the waters before the gold-creating power passed into them, and the river sands became changed into gold, as they remain to this day. Select two key details that could be included in a summary of the myth. Bacchus granted Midas's wish to have the golden touch. Bacchus sometimes found his teacher Silenus missing. Midas entertained Silenus in his kingdom for ten days. Midas received a wish for returning Silenus to Bacchus. Silenus was found by peasants and carried to Midas. The graph represents revenue in dollars as a function of greeting cards sold. A coordinate plane showing Greeting Card Revenue, Number of Cards Sold on the x-axis and Revenue in dollars on the y-axis. A line starts at (0. 0) and passes through (2, 8), (4, 16), and ends at (5, 20). Which equation represents the function shown on the graph? y = x y = x y = 2x y = 4x Yo tengo once aos y no tengo hermanos. Mitiene cuarenta aos. l es grande y cmico.padremadrehermanohija explain why ply(ethene) can become a pollutant? The media's role is primarily entertainment, so it has little effect on our wellness. .Martin Luther King, Jr. s Letter from Birmingham Jail (1963). In at least a paragraph, describe a persuasive moment of the speech. QUOTE THE LINE! Explain why it was so memorable. DO NOT USE THE FIRST LINES. How does Bradstreet use figurative language throughout "To My Dear Loving Husband" to develop the theme? Her comparisons emphasize the importance of love. Her comparisons emphasize the reason for love. Her comparisons emphasize her husband's goodness. Her comparisons emphasize her undying love for her husband. Suppose an experiment is designed to test the durability of batteries in different conditions. All of the batteries tested are double-A (AA) Brand X. All sets of batteries are preconditioned in different environmental conditions for exactly 168 hours (1 week). Set 1: 0C (freezing point of water) Set 2: 24C (approximately room temperature) Set 3: 37C (approximately body temperature) The batteries are then continuously used to power identical mechanical drummer toys. As long as the toy keeps drumming the battery is considered functional. The drumming time for each toy is measured as an indication of battery durability. In this experiment, which condition is not controlled? A.) temperature B.) brand of batteries C.) test for durability D.) type of battery (battery size) A sandman earns a commission of 26%. One week he had sales of $24400. Find the commission for the week. Karim has two investments, one in Company A, and another in Company B. Karim purchased 3,000 shares in company A at $2.65 per share. Since purchasing the shares, the price per share increased to $2.95 per share, after which point Karim decided to sell, realizing a profit. At the same time, Karim purchased 2,000 shares in Company B at $1.55 per share. Since purchasing the shares, the share price fell to $1.30 per share, after which Karim decided to sell the shares, suffering a loss. Karim is required to pay tax at a rate of 28% on the combined profit from both investments. Calculate how much tax Karim must pay. The probe used in a medical ultrasound examination emits sound waves in air that have a wavelength of 0.12 mm. What is the wavelength of the sound waves in the patient?a) 0.54 mm b) 0.12 mm c) 0.26 mm d) 0.027 mm If youre writing your own piece of literature which strategy would make your work seem more postmodern in character A. Use rhythm and rhyme in very structured, highly predictable way. B. Use elements of popular culture to consider serious topics or themes. C. Rely on traditional forms and their conversations to guide your expressions of ideas D. Focus on the elements of narrative that readers expect to see in all contemporary work. You are tracking three loci in the fruit fly, locis A, B, and C, and want to know whether the loci are linked and if so what their physical distances are from one another as well as the physical order they are in. To find out this information you perform a three-point testcross with a fly that is heterozygous for all three alleles. The progeny of this cross are: