A 2-kg object is moving at 3m/s. A 4-n force is applied in the direction of motion and then removed after the object has traveled an additional 5m. The work done by this force is:.

Answers

Answer 1

A 2-kg object is moving at 3m/s. A 4-n force is applied in the direction of motion and then removed after the object has traveled an additional 5m. The work done by this force is:.  20J

force F = 4 N

distance travelled  S = 5 m

work done W = F * S

                    = 4 * 5

                     =20 J

( or )

force F  = 4 N

mass M = 2 kg

acceleration a = F / M

                    = 2 m /  s  2

work done W = ( 1/ 2 ) M  ( v 2 - u2)             ( work energy theorem )

from kinematics relation  v 2 - u 2= 2aS

∴ work done W = ( 1/ 2 ) M * 2aS

Force is described as: the rush or pull on an item with mass reasons it to change its speed. pressure is an external agent able to converting a body's country of rest or movement. It has a importance and a direction.

Motion - the action or technique of moving or of converting location or function; motion. 2. electricity of motion, as of a residing body. 3. the manner of moving the frame in on foot; gait.

Learn more force here:-

https://brainly.com/question/12785175

#SPJ4


Related Questions

TRUE/FALSE. a recently discovered extrasolar planet appears to be rockier and denser than earth. it is 16 times as massive as earth, but its diameter is only twice that of earth.

Answers

The acceleration of free fall on the planet is given by 39.2 m/s².

What is  the acceleration of free fall?

The acceleration of free fall is the acceleration at which a body falling freely experiences the gravitational pull of a single planet. It is also known as a gravitational acceleration.

Value of  the acceleration of free fall on earth is 9.8 m/s².

The formula of acceleration of free fall on any planet is given by:

g₁ = GM/R²

As the extrasolar planet appears to be rockier and denser than earth. it is 16 times as massive as earth, but its diameter is only twice that of earth, the acceleration of free fall on any planet is given by:

g₁ = GM/R² = 16GMe/(2Re)² = 4 GMe/Re = 4g = 4× 9.8 m/s² = 39.2 m/s² .

Learn more about acceleration here:

https://brainly.com/question/12550364

#SPJ1

a 7 kg mass oscillates on a spring with 10 j of total energy. what is the maximum speed of the mass in m/s?

Answers

The maximum speed of the mass is Vmax = 1.69m/s.

E = 10 J and m = 7kg

Vmax = [tex]\sqrt{\frac{2 * 10}{7} } = 1.69[/tex]

Vmax = 1.69 m/s

The maximum device electricity takes place when the vibrating mass reaches its maximum top and the item's velocity is maximum. while the pendulum hits its lowest factor, capability power is converted into kinetic power.

This is because the pendulum is accelerating because it hits its lowest factor. consequently the kinetic power of the pendulum is maximum at the lowest factor. the entire electricity of the block and spring device is identical to the sum of the ability electricity saved within the spring and the kinetic energy of the block proportional to the rectangular of the amplitude.

Learn more about The mass here:- https://brainly.com/question/19385703

#SPJ4

a student weighed a chunk of solid co2 as 1.82 gram. what is the gas-to-solid volume ratio if the sublimated chunk produced gaseous carbon dioxide with volume 0.85 liter at atmospheric pressure. the additional necessary datum is given in the text

Answers

A student weighed a chunk of solid carbon dioxide as 1.82 gram.[tex]\frac{0.85 L}{0.0011667 L}[/tex] (728.55 ) is the gas-to-solid volume ratio if the sublimated chunk produced gaseous carbon dioxide with volume 0.85 liter at atmospheric pressure.

What is atmospheric pressure?

The air around you has weight, and it presses against everything it touches. That pressure is called atmospheric pressure, or air pressure. It is the force exerted on a surface by the air above it as gravity pulls it to Earth. Atmospheric pressure is commonly measured with a barometer.

How to calculate?

density of [tex]CO_{2}[/tex] = 1.56g/[tex]cm^{3}[/tex]

density =[tex]\frac{mass}{volume}[/tex]

volume of solid  [tex]CO_{2}[/tex]

[tex]\frac{1.56g}{1cm^{3} }[/tex]=[tex]\frac{1.82 g}{?}[/tex]

? = [tex]\frac{1.167 }{cm^{3} }[/tex]

volume of [tex]CO_{2}[/tex] from  [tex]cm^{3}[/tex] to L

1 [tex]cm^{3}[/tex]= 1 mL

1.167[tex]cm^{3}[/tex]  × [tex]\frac{1 mL }{ 1cm^{3} }[/tex]× [tex]\frac{1L}{1000mL}[/tex]= 0.0011667 L

Ratio:   [tex]\frac{V gas}{V solid}[/tex]

([tex]\frac{0.85 L}{0.0011667 L}[/tex]) = 728.55

Know more about atmospheric pressure visit the link:

https://brainly.com/question/19587559

#SPJ4

A flea gets its thrills by riding on the outer edge of a golden oldies record album of radius 15 cm as it is being played with a rotational period of 1.8 seconds. a) what is the flea’s average speed? b) what is the flea’s centripetal acceleration?

Answers

A. The average speed of the flea is 0.52 m/s

B. the centripetal acceleration of the flea is 1.8 m/s²

A. How do I determine the average speed?

We'll begin by obtaining the angular velocity. This can be obtained a follow:

Period (T) = 1.8 sPi (π) = 3.14Angular velocity (ω) =?

ω = 2π/ T

ω = (2 × 3.14) / 1.8

ω = 3.49 rad/s

Finally, we shall determine the average speed. This is shown below:

Angular velocity (ω) = 3.49 rad/sRadius (r) = 15 cm = 15 / 100 = 0.15 mAverage speed (v) = ?

v = ωr

v = 3.49 × 0.15

v = 0.52 m/s

Thus, the average speed is 0.52 m/s

B. How do I determine the centripetal acceleration?

Haven obtain the average speed in the calculation made above, we can determine the centripetal acceleration as follow:

Average speed (v) = 0.52 m/sRadius (r) = 0.15 mCentripetal acceleration (a) =?

a = v² / r

a = (0.52)² / 0.15

a = 1.8 m/s²

Thus, the centripetal acceleration is 1.8 m/s²

Learn more about centripetal acceleration:

https://brainly.com/question/24290129

#SPJ1

A sample of a gas (5. 0 mol) at 1. 0 atm is expanded at constant temperature from 10 l to 15 l. The final pressure is __________ atm.

Answers

The final pressure of a sample of a gas (5.0 mol) at 1.0 atm is expanded at constant temperature from 10 l to 15 l is 0.67 atm

Boyle's law states that at constant temperature of a given mass of confined gas, the product of its pressure and volume is also constant. Let P1 and V1 be the initial pressure and volume of the gas and P2 and V2 be the final pressure and volume of the gas.

P1 = 1 atm

V1 = 10 l

V2 = 15 l

According to Boyle's law,

P1 V1 = P2 V2

1 * 10 = P2 * 15

P2 = 10 / 15

P2 = 0.67 atm

Therefore, the final pressure is 0.67 atm

To know more about Boyle's law

https://brainly.com/question/1437490

#SPJ4

A baseball is thrown vertically upward and feels no air resistance. As it is rising.

Answers

A baseball is thrown vertically upward and feels no air resistance. As it is rising its momentum is not conserved, but its mechanical energy is conserved.

What is Momentum?

Momentum may be defined as a unique property of a moving body that the body has by virtue of its mass and motion and that is equal to the product of the body's mass and velocity.

According to the context of this question, as an object typically moves along the vertical direction, the gravitational potential energy, and the kinetic energy change. So, due to this, its momentum is not conserved, but its mechanical energy is conserved.

Therefore, a baseball is thrown vertically upward and feels no air resistance. As it is rising its momentum is not conserved, but its mechanical energy is conserved.

To learn more about Momentum, refer to the link:

https://brainly.com/question/1042017

#SPJ1

tv broadcast antennas are the tallest artificial structures on earth. in 1987, a 73.5 kg physicist placed himself and 400 kg of equipment at the top of one 610-m high antenna to perform gravity experiments. randomized variables m

Answers

The answer to the given question is 1.90084 mm and the antenna was compressed to 19 cm respectively.

calculations;

assuming;

m = 400 kg be the total mass compressing the antenna,

h = 610 m be the height of the antenna,

g = 9.81 m/s² be gravitational acceleration,

E = 200 GPa = 2×108 N/m² be Young's modulus of steel.

The mass m applies vertical force F = mg

The cross-section of the antenna is S = πr²

Let Δh be the compression of the tower to be calculated.

By the definition of Young's modulus

Δh/h = F/(S×E)

Therefore

Δh = (h×F)/(S×E) = (h×m×g)/(πr²×E)

Substituting actual numbers

Δh = (610×414×9.81)/(π×0.15²×2×108) = 0.190084 mm

The antenna was compressed about 19 cm.

Learn more about antennas here; https://brainly.com/question/6849706

#SPJ4

which of the following reactions would be inhibited in the presence of large amounts of an egg white protein that binds and sequesters biotin?

Answers

The correct answer is pyruvate to oxaloacetate.

Enzymatic activation of pyruvate kinase increases cytosolic oxaloacetate to inhibit the Warburg effect is a research paper written by Elizabeth K Wiese, Sadae Hitosugi, Sharon T Loa, Annapoorna Sreedhar, Lindsey G Andres-Beck, Kiran Kurmi, Yuan-Ping Pang, Larry M Karnitz, Wilson I Gonsalves and Taro Hitosugi.

Avidin is a glycoprotein,  four identical subunits are there in avidin. It is found in white part  of the egg of reptiles, amphibians, and birds.

Avidin binds in specific manner with biotin.

Avidin  is resistant to some of the enzymes like  pancreatic enzymes.

Therefore, the conversions of Pyruvate into glucose and  and the conversion of  Pyruvate  into oxaloacetate would be blocked if  the  avidin is added  to a cell homogenate.

To learn more about pyruvate, refer: https://brainly.com/question/29362133

#SPJ4

15.69 ... a sinusoidal transverse wave travels on a string. the string has length 8.00 m and mass 6.00 g. the wave speed is 30.0 m>s, and the wavelength is 0.200 m. (a) if the wave is to have an average power of 50.0 w, what must be the amplitude of the wave? (b) for this same string, if the amplitude and wave- length are the same as in part (a), what is the average power for the wave if the tension is increased such that the wave speed is doubled?

Answers

Amplitude of wave at power of 50 W is 7.07 cm and the average power of the wave after increasing the temperature 8 times the initial power.

(a) Length of the string (l) = 8 m

Mass of the string (m) = 6 g

Wavelength of the string (λ) = 0.2 m

Wave speed (v) = 30 m/s

Average power (P) = 50 W

Mass per unit length (μ) = (6 × 10⁻³ ) / 8 = S  ×  v

Angular speed (ω) =  2 × π × f

= (2 × π × v ) / λ

= (2 × π × 30) / 0.2

Now, Average power (P) = (1/2) ×  ρ × ω² × A² × S × v,

Thus, Amplitude (A) =

= (1/ω)  × √((2 × P)/  (ρ × μ))

= A = [ (0.2) / 2×π × 30 ] √ ((2×50×8)/ (6 × 10⁻³ × 30 ))

= A = 0.0707 m

= A = 7.07 cm

(b) Average power = P

Wave speed = V

Using the equation of Power = (1/2) ×  ρ × ω² × A² × S × v,

We can see that P ∝ ω² × v

= P ∝ v² × v

= P ∝ v³

Thus, when wave speed of string is doubled, the average power will be 8 times.

To know more about Average Power:

https://brainly.com/question/28447658

#SPJ4

In the experiment of the Charles' Law (V and T) you preformed, which variables are kept constant? Choose all the apply.
, , ,
Group of answer choices
A, n
B, the substance
C, P
D, V
E, T

Answers

In Charle's law, volume occupied by a fixed amount of gas is directly proportional to its absolute temperature, if the pressure remains constant.Hence, correct options are A , B and C.

Gases have a tendency to expand when heated, according to the experimental gas law known as Charle's law. The Kelvin temperature and the volume will be directly proportional when the pressure on a sample of a dry gas is held constant, according to a modern interpretation of Charles's law. According to Harles' Law, a gas's volume at a constant pressure is directly proportional to its Kevin temperature for a given mass. V1/T1=V2/T2 is how the relationship between temperature and volume is expressed mathematically. The balloon will revert to its original shape once you are back in a warm environment, though. This is due to Charles' Law, which states that a gas, in this case, helium, occupies more space when it is warm.

Learn more about Charle's law here:

https://brainly.com/question/16927784

#SPJ4

A 68 kg object, starting from rest, travels from point A to point B at a rate of 30 m/s in 2 hours. What is the applied force on the object?

Answers

Answer:

[tex]\huge\boxed{\sf F = 0.28\ N}[/tex]

Explanation:

Given Data:

Mass = m = 68 kg

Velocity = v = 30 m/s

Time = 2 hours = 2 × 60 × 60 = 7200 s

Required:

Force = F = ?

Formula to be used:

[tex]\displaystyle F = \frac{mv}{t}[/tex]

Solution:

[tex]\displaystyle F = \frac{(68)(30)}{7200} \\\\F = \frac{2040}{7200} \\\\F = 0.28 N\\\\\rule[225]{225}{2}[/tex]

What are the two missing words in this sentence? A ______ _______ camera detects infrared radiation and uses this information to create a picture

Answers

A thermal infrared sensor camera detects infrared radiation and uses this information to create a picture.

How does a thermal infrared sensor camera work?

In thermal or infrared detection systems, sensors are used to detect radiation in the infrared region of the electromagnetic spectrum. The thermal energy or heat produced by the scene being watched is detected by an infrared camera, which then transforms it into an electrical signal. After that, this signal is processed to create an image. An infrared camera's ability to detect heat can be quantified very precisely. Infrared cameras can be used to assess thermal performance and gauge the intensity of heat-related issues. In general, bodies and objects produce more radiation when they are heated up. Walls and other solid things cannot be seen through infrared cameras. They are limited to measuring heat.

To know more about the infrared detection camera, visit:

https://brainly.com/question/20009656

#SPJ1

a 0.27-kg stone is held 1.2 m above the top edge of a water well and then dropped into it. the well has a depth of 5.2 m.

Answers

The answers to the questions are (a) 3.17J, (b) -13.75J, and (c) -16.7J, respectively.

What does it mean to have depth?

The degree to which a person taking the appropriate, intellect, wisdom, insight, empathy, etc., as demonstrated by their actions or by some other mental product, such as a scholarly paper, argument, piece of art, etc. a substantial amount of such wisdom, understanding, etc. usually depths.

Briefing:

Utilize U=mgy, wherein y is evaluated in relation to a standard. Here, y is calculated relative towards the well's top edge, where y is set to zero.

(a) y = 1.2m: U=mgy = (0.27kg)(9.80m/s²)(1.2m)=+3.17J

(b) y = –5.2m: U=mgy = (0.27kg)(9.80m/s²)(–5.2m) = −13.75J

(c) ΔU = Uf − Ui = (−13.75J)−(3.17J) = −16.92 = −17J

To know more about Depth visit:

https://brainly.com/question/13104905

#SPJ4

english homework 7 grade
can I get help first, second and third person

Answers

Explanation:

First person:

First person is like you telling a story. It uses words like I or we. For example "I walked to the library after school," would be an example of first person. You are talking about yourself and what you did.

Second person:

Second person is referring to someone else. It uses words like you. This is like in a choose your own adventure book, with a sentence like "You advanced to the next level," or "You opened the door cautiously." You are talking about someone else, usually the person reading what you are righting.

Third person:

Third person is like you referring to someone in general. Common words for third person are she, he, they, them, or it. It is not always you talking about yourself or someone else. Some common examples are "The girl in the red coat then ate the cookie," or "They were in trouble!"

Hope this helps!

On vacation, your 1250-kg car pulls a 550-kg trailer away from a stoplight with an acceleration of 1.60 m/s2 . What is the net force exerted by the car on the trailer? What force does the trailer exert on the car? What is the net force acting on the car? Assume that the positive x axis is directed toward the direction of motion.

Answers

The force, net force exerted was found to be 2000N

Define force ?

In mechanics, force is any action that seeks to sustain or modify the motion of a body or to deform it. The idea of force is usually defined in terms of Isaac Newton's three laws of motion, as stated in his Principia Mathematica (1687). Newton's first principle states that a body at rest or moving at a regular pace in a straight line will continue in that condition unless some force is applied to it.

The second law states that when an external force applies on a body, it causes the body to accelerate (change in velocity) in the direction of the force. The acceleration is related to the magnitude of the external force and inversely proportional to the amount of matter in the body. According to Newton's third law, when one body exerts a force on another, the second body exerts an equal force on the first.

the cars weigh was =1250kg

trailer weight was = 550 kg

acceleration=1.60

a) F=ma

=(550)(1.60)

=880 N

b) F=ma

The net force was found to be =880 N

c) F = ma

(1250) (1.6)

=2000N

To learn more about Force follow the given link: https://brainly.com/question/25256383

#SPJ4

this bar is 0.12 meters long and moving 29.6 m/s through a magnetic field of 58 mt. what is the induced electromotive force in the bar?

Answers

The induced electromotive force in the bar is 0.206 volt.

What is induced electromotive force?

It is the creation of a potential difference in a coil as a result of variations in the magnetic flux flowing through it. To put it another way, it is said that electromotive force, or EMF, is induced when the flux connecting with a conductor or coil changes.

Given parameters:

Length of the bar: l = 0.12 meter

Speed of the bar: v = 29.6 m/s.

Magnetic field: B = 58 mT = 58 × 10⁻³ T.

Hence,  the induced electromotive force in the bar: ε = lvB

= 0.12 × 29.6 × 58 × 10⁻³ Volt

=0.206 volt.

Hence, the induced electromotive force in the bar be 0.206 volt.

Learn more about induced electromotive force here:

https://brainly.com/question/3660151

#SPJ1

how to shape the front's armhole for a knitted vest so that the fabric does not bunch up at the armhole

Answers

For having a perfect fronts armhole one need to measure the armhole depth.

How to measure armhole depth?

To measure armhole depth one trick is to wrap a measuring tape from the shoulder to the armpit.

One can take measuring tape  down over the front of the shoulder and arm, pausing once it hits the center of armpit. This measurement is referred to as your Armhole depth.

Formula for measuring the correct armhole

An armhole is a sleeve that joins body and shoulder by which the sleeve meets the body at the underarm.

There is a Formula for measuring the correct sleeve and each specific site has its own table to measure the perfect armhole

In Centimeters the formula is

Bust/6 + 3.5 to 6cm

In inches the formula is

Bust/6 + 1.37 to 2.3 in

The usual width of the armhole is 4-6cm  

If a person is XS -S most likely they will have 4cm of width for their sleeve

And if the person is M, L or XL, most likely they will have width of 5-6cm

Hence this can also be taken as reference.

To know more about armhole numericals click on https://brainly.com/question/3283329

SPJ4#

a swimmer in an inner tube would like to ride the longshore current 0.18 km along the beach to the concession stand. the current is moving at 7.7 m/min. how long will it take the swimmer to reach the concession stand?

Answers

The distance to the concession booth is 1.386 kilometers, or kilometers per hour. A swim meet's length is influenced by a number of variables.

Why do swim meets last so long?Swim meets can last all day, but not always. A swim meet's length is influenced by a number of variables. such includes the number of participants, the number of events, and the age of the swimmers. The length of the meet might increase with the number of participants and events in a day.Use the distance formula, d = st, or distance equals speed times time, to find the distance. Given that they both reflect a certain amount of distance per unit of time, such as miles per hour or kilometers per hour, rate and speed are comparable.

Explanation:

d = 0.18 * 7.7 = 1.386km/hr.

The distance to the concession booth is 1.386 kilometers, or kilometers per hour.

To learn more about Distance refer to:

https://brainly.com/question/26550516

#SPJ4

at what rate, in megawatts, must energy be dissipated when the full current is switched off in 65 ms?

Answers

The energy dissipation should be 65 Kilo joule.

Power is nothing but measurement the rate of electrical energy transfer by an electric circuit per unit of time. It is denoted by P and measured using the SI unit of power which is watt or one joule per second. Electric power is commonly supplied by electric batteries and produced by electric generators.

So, P = ΔE/Δt

here P = 1 megawatt and time is 65 x 10^-3 sec

putting the values we get that

1 x 10^6 =  ΔE/ 65 x 10^-3

ΔE = 10 ^ 6 x 65 x 10 ^-3

ΔE = 65 x 10 ^3

ΔE = 65 K Joule

hence the energy dissipation should be 65 Kilo joule.

To learn more about energy , visit here

https://brainly.com/question/1932868

#SPJ4

density and refractive index are class characteristics, and a match does not meet the criteria for individualizing a glass fragment to a common source.

Answers

Density and refractive index are class characteristics and match does not meet the criteria for individualizing glass fragment to a common source is true.

How to individualize glass fragments?

The only way to individualize glass fragments at a crime scene to a single source is to assemble the fragments and physically fit them together just like a jigsaw puzzle.

Glass is physical and class evidence. Glass can be considered as an individual evidence if the pieces of broken glass can be reassembled & can help in identifying location, sequence of events & object identity

Forensic glass samples can be analyzed by comparing refractive index of the sample to the possible source.

To know more about glass fragments, refer

https://brainly.com/question/2305853

#SPJ4

What are the two independent components of projectile motion?.

Answers

The two independent components of Projectile motion in 2D plane are horizontal and vertical.

Projectile motion is nothing but a form of motion experienced by an object or particle that is projected in a gravitational field, such as from Earth's surface, and moves along a curved path under the action of gravity only. It means the object is thrown from earth and due to the gravity object is again coming back to earth.

When object is moving up, the velocity it has can be derived into  its components horizontally and vertically because velocity is a vector quantity.

V = Vx + Vy

where V is the resultant vector and Vx and Vy are the horizontal and vertical components of the velocity.

Hence the two independent components of Projectile motion in 2D plane are horizontal and vertical.

To learn more about Projectile motion, visit here

brainly.com/question/11049671

#SPJ4

sometimes it is said that water is removed from clothes in the spin dryer by centrifugal force throwing the water outward. is this correct? discuss

Answers

This statement is untrue. A pseudo force is centrifugal force. It's not true. Since there is a hole in the spin dryer's drum, there is nothing to cause the water to move in a circular motion or exert a high centripetal force.

What is a centrifugal force in simple words?

The force that pushes an item rotating away from its axis of rotation is known as centrifugal force. The propensity of an object travelling in a circle to move away from the circle's center is known as centrifugal force. When viewed from a rotating frame of reference, the centrifugal force in Newtonian mechanics appears to act on every object. It is pointed away from the origin of the coordinate system, along an axis that is perpendicular to the axis of rotation.

Where is centrifugal force used?

When rotating coordinate systems are used to analyze rotating objects, such as centrifuges, centrifugal pumps, centrifugal governors, and centrifugal clutches, as well as centrifugal railways, planetary orbits, and banked curves, the concept of centrifugal force can be applied.

To know more about Centrifugal Force visit:

https://brainly.com/question/17167298

#SPJ4

g based on our understanding of the universe, which is true about the expansion of space?

Answers

When scientists refer to the cosmos as expanding, they indicate that it has been expanding ever since the Big Bang, when the universe first began.

Explain about the universe?

Everything in the cosmos is all the matter and energy that are present in space are included. Additionally, it naturally encompasses you and time itself. The other planets and their numerous moons, in addition to Earth and the Moon, make up the cosmos.

Due to their frequent confusion, it's also critical to understand the distinction between space and the universe. All celestial bodies, matter, energy, galaxies, solar systems, and other such physical entities are collectively referred to as the universe. Space, on the other hand, describes the bare space in between all of these things.

As of right now, there is no evidence to support the existence of multiple universes; instead, what we can see points to the existence of just one, namely, our own.

To learn more about universe refer to;

https://brainly.com/question/13045529

#SPJ4

Compare that speed with the Sun's orbital speed around our galaxy. Based on your comparison, do you think the galaxy's gravity would be strong enough to retain the supernova debris if there were no interstellar medium to slow it down?
Supernova debris moves about 100 times faster than the Sun. The gravity of galaxy alone would not retain the supernova debris.

Answers

Supernova debris moves about 100 times faster than the Sun. The gravity of galaxy alone would not retain the supernova debris.

A planet's orbital velocity modifications, depending on how far it's far from the solar. The closer a planet is to the solar, the more potent the sun's gravitational pull on it, and the quicker the planet actions. The farther it's far from the sun, the weaker the Solar's gravitational pull, and the slower it moves in its orbit.

Hubble's law, which says certainly that a galaxy's speed is directly proportional to its distance, additionally tells us some thing important approximately the country of the universe. If the universe is static and unchanging, there should be no correlation among distance and pace.

They must come to be greater turbulent. It produces so much visible light that it is opaque and blocks our view of anything beyond it. It reflects most light from far distances of the galaxy away from our line of sight. A star starts offevolved its time on the principle sequence with 10 solar loads.

Learn more about Supernova debris here:- https://brainly.com/question/28021391

#SPJ4

kinematics can answer all of the following questions except what was the maximum speed of the baseball? how rapidly did the baseball slow down when it hit the ground? why does a baseball drop to the ground down after being thrown? how far did the baseball fly? in what direction did the baseball travel? next

Answers

kinematics can answer all the following questions except, Why does a baseball drop to the ground down after being thrown?

What are the objectives of kinematics?The goal of kinematics is to provide a description of the spatial positions of bodies or systems of material particles, as well as the speeds and velocities of those particles (acceleration). Motion descriptions are only conceivable for particles with limited motion, or particles travelling along predetermined pathways, when the causing forces are ignored. Forces control the path's form in unrestrained or free motion.A list of places and related times would make a good description of the motion of a particle travelling along a straight line. A mathematical equation that expresses position in terms of time would be necessary for a continuous description.

To learn more about kinematics, refer to

https://brainly.com/question/26407594

#SPJ4

Two blocks are attached to opposite ends of a massless rope that goes over a massless, frictionless, stationary pulley. One of the blocks, with a mass of 5.0 kg accelerates downward at 34g.The mass of the other block moving upwards is 4.71 kg

Answers

The acceleration of the block moving upward is 5.15g.

The two blocks of mass 5 kg and 4.71 kg are connected by a massless rope, that goes over a frictionless, stationary pulley.

The acceleration of the 5 kg block is 34g in downwards direction.

So, if the tension is the rope is T, then we can write,

For the 5 kg block,

5g - T = 34g

For the 4.71 kg block,

T - 4.71g = 4.71a

Where, a is the upward acceleration of the block of mass 4.71 kg,

Solving the above 2 equations,

We get,

5g - 4.71(a-g) = 34g

Solving further,

9.7g - 4.71a = 34g

4.71a = -24.3g

a = -5.15g

So, the upward acceleration of the 4.71kg block is -5.15g.

To know more about Acceleration, visit,

https://brainly.com/question/605631

#SPJ4

a parallel-plate air capacitor is to store charge of magnitude 290 pc on each plate when the potential difference between the plates is 41.0 v . A.If the area of each plate is 6.80cm2, what is the separation between the plates? B.If the separation between the two plates is double the value calculated in part (a), what potential difference is required for the capacitor to store charge of magnitude 260pC on each plate?

Answers

The separation between two plates of parallel capacitor is 8.51 mm and when the separation is doubled the capacitance is reduced to halve.

Magnitude of Charge (Q) = 290 pc

Potential difference between plates (V) = 41.0 V

Let capacitance be = C

Using the relationship between charge and potential difference,

= Q = C × V

= C = Q / V

= C = 290 × 10⁻¹² / 41

= C = 7.07 × 10⁻¹² F

Now, we know that C = (ε × A) / d

Here, Area (A) = 6.80 cm² and

Distance = d

Thus, distance =

= d = (ε × A) / C

= d = (8.85 × 10⁻¹² × 6.80 × 10⁻⁴) / (7.07 × 10⁻¹²)

= d = 8.51 × 10⁻⁴ m

= d = 8.51 mm

Using Q = C × V,

= V = Q/C

If the separation between the two plates is doubled, then the capacitance is halve of the original value.

Thus, new V =

= 41 × 2

= 82 V

Hence, the new capacitance is 82 V when the distance of plates is doubles and the original separation between plates is 8.51 mm.

To know more about Parallel Plate Capacitor:

https://brainly.com/question/21591962

#SPJ4

different light sources give different ranges of wavelengths associated with the colors of light. colors fade from one to the other gradually, therefore it is hard to establish exact ranges. nevertheless, it is useful to know how the approximate wavelength ranges correspond to the main colors of light. the visible light area of the electromagnetic spectrum can be found in the chempendix. match each wavelength range to its corresponding color.

Answers

The range of the wavelength 650-740 nm is of the colour red, 390-420 nm is of the colour violet, 510-550 nm is of the colour green, 450-480 nm is of the colour blue, 570-600 nm is of the colour yellow, 600-640 nm is of the colour orange.

The visible region of the electromagnetic spectrum ranges from higher frequency (violet) to lower frequency (red).

All the forms of electromagnetic radiation fall within the electromagnetic spectrum.

Electro magnetic energy travels in waves that contains a broad spectrum from radio waves to gamma rays. The human eye can detect a very small portion of this spectrum known as visible light ranging from 380-700 nano metres.

To know more about wavelengths:

https://brainly.com/question/29213765

#SPJ4

In order to produce beats, the two sound waves should have
a) slightly different amplitudes
b) the same frequency
c) the same amplitude
d) slightly different frequencies

Answers

The two sound waves should have a rhythm in order to create beats.

Option d). slightly different frequencies

The frequency of an event is its repetitions per unit of time. In contrast to spatial frequency, it is also sometimes referred to as temporal frequency, and in a contrast to angular frequency, it is also referred to as ordinary frequency. Hertz (Hz), which equals one (event) per second, is the unit of frequency. The reciprocal of frequencies is period, which is defined as the length of time for one cycle of a recurring occurrence. For instance, if a heart beats 120 times per minute (2 hertz), its period (T), or the space between beats, is half a second (60 seconds divided by 120 beats). In science and engineering, frequency is a crucial specification parameter.

Learn more about frequencies here:

https://brainly.com/question/12970278

#SPJ4

what is the term for periods of accelerated physical development with associated changes in height and weight?

Answers

The term is growth.

This term is used to define the physical development of height and weight in an individual.

The growth depends on an individual.

During the growth the hands and feet are likely to grow. This develops the height of any individual and the weight is also defined as the individual grows.

It is the continuously changes of the characteristics of the body, most noticeable in height and weight.  

The ages 13-15 and 17-18 the two major brain growth spurts occur. In times of growth spurts the changes is visible during the first year of puberty.

Therefore, the term for periods of accelerated physical development with associated changes in height and weight is growth.

To learn more about growth, refer: https://brainly.com/question/16465256

#SPJ4

Other Questions
during what battle did the casualties exceed twice the number of men killed and wounded in the war of 1812 and war with mexico combined? When much of her work was automated with a new computerized system, Jaycee became unsure of her ability to do her job. Tom, her boss, has been mentoring her to improve hera.) self-efficacyb.) agreeablenessc.) internal locus of controld.) self-esteeme.) consciousnessa.) self-efficacy As a quick and conventional military victory eluded Union armies, Radical Republicans moved the nation closer to the idea of total emancipation as an economic means to hurt the Confederacy. Identify the steps taken by the Union against slavery before total emancipation.correct:-the second confiscation act-abolition in the district of columbia-a march 1862 prohibition.. What does the 14th Amendment says?. khloe works for kardashian enterprises. while she generally likes her job and enjoys her colleagues, she's realized that she needs to do more to influence her supervisor if she wants access to the best projects. which of the following, if true, would make khloe more likely use politics to try to influence her boss? Mariana receives a $20 gift card for downloading music and wants to determine how many songs she can purchase. Each downloaded song costs $1. 29. If m represents the number of songs downloaded, which inequality represents the given situation?20 m greater-than-or-equal-to 1. 2920 m less-than-or-equal-to 1. 291. 29 m less-than-or-equal-to 201. 29 m greater-than-or-equal-to 20. A shoe company is going to close one of its two stores and combine all the inventory from both stores. These polynomials represent the inventory in each store: which expression represents the combined inventory of the two stores?. what part of a fire alarm system coordinates the actions that the system must take in response to its other components? jones co, produces 3 dolls. each doll has hair that is made of a special filament that is only available from one supplier. the filament sells for $4 per gram. tom wears a soccer uniform. sheila is in a wedding dress and requires some hand sewing. godiva has long hair. the budgeted selling price and costs for the 3 dolls are listed below: tomsheilagodiva selling price.............$25$40$35 direct labor..............$5$10$5 plastic (body)...........$3$4$4 fabric (clothes)........$2$3$0 hair.........................$2$4$10 variable overhead...$1$2$1 fixed overhead.......$4$8$4 total cost...............$17$31$24 profit per doll..........$8$9$11 the fixed overhead costs are all common fixed costs that are simply allocated among the product lines. the fixed cost per unit above assumed production and sales of 3,000 toms, 3,000 sheilas, and 4,000 godivas. assume there is unlimited demand for all three products. jones plans to produce 10,000 dolls. assuming that there are no constraints on any of the production resources, which doll should be produced to maximize net income for jones co.? a. tom b. sheila c. godiva Treesa Mayering recently began her first job at a PR firm called Pro as a copywriter. Her job involves creating scripts for press releases, advertisements, and other media events. She has been working under the guidance of Will Preston, the senior copywriter. Treesa, who has no prior experience in this job, had worked on scripts for advertisements and online brochures alone when she was asked to work on a press release for the first time. Will reviewed Treesa's script and sent her an e-mail full of detailed corrections, which she promptly implemented. However, when Will looked at the script later, he felt that it did not represent a significant improvement of her first draft.Which of the following, if true, would best explain this outcome?A) The feedback provided by Will was not elaborate and comprehensive enough.B) Treesa took a lot of time to implement Will's corrections and revise her script.C) Treesa was hired because she demonstrated considerable analytical and creative thinking skills in her pre-employment tests.D) Will routinely e-mailed feedback on scripts for advertisements, online brochures, and press releases to his team members.E) Will believed that Treesa's understanding of his e-mailed feedback would be accurate. What line supports the conclusion that Claudius fears his own fate?. (chapter 8) light reflecting from a surface, measured in candela per square meter (cd/m2) or foot lamberts (fl) is known as: In triangle ABC, determine the possible values for x. Which of the following is an example of operant conditioning?a. when a cat and a dog share the same water bowl b. when a cat learns to drool at the sound of a can opener c. when a dog plays dead she gets a treat in order to encourage her to repeat the behavior d. when a dog refuses to play dead Is another name for the larynx and the importance it plays in the human body?. listen to the example above. which of the following statements correctly describe reich's electric counterpoint, iii? (select all that apply.) Use the equation from Question 4 and your answer to Question 2 to calculate the rate of ATP hydrolyzation, R. For step size, assume the vesicle is being transported by a myosin motor protein. (Hint: make sure you convert values to the appropriate units) The units for rate of ATP hydrolysis are s-1Question 2 and 4 are as follows2- Suppose your average velocity is 13.11 pixels/s. Given the fact that 1 um = 5.179 pixels, convert your average velocity to m/s. (Show your work.)4- Write the definition of the rate of ATP hydrolyzation, R, in your own words. How would you calculate the rate of ATP hydrolyzation, R, if you know the step size of the motor protein, s, and the average vesicle velocity, v? Write the equation here What was the main focus of the debate over slavery in the Constitutional Convention?. the chief executive officers of the major u.s. steel makers would most likely be prosecuted under the antitrust laws if they A net force of 9,079 N i applied to a car having ma of 1,447 kg. Find the acceleration of the car