The object lost 228 J of energy due to friction as it slid down the inclined plane.
To find the energy lost due to friction as the object slides down the inclined plane, we need to calculate the initial mechanical energy and the final mechanical energy of the object.
The initial mechanical energy (Ei) is given by the potential energy at the initial height, which is equal to the product of the mass (m), acceleration due to gravity (g), and the initial height (h):
Ei = m * g * h
The final mechanical energy (Ef) is given by the sum of the kinetic energy at the final speed (KEf) and the potential energy at the final height (PEf):
Ef = KEf + PEf
The kinetic energy (KE) is given by the formula:
KE = (1/2) * m * v^2
where m is the mass and v is the velocity.
The potential energy (PE) is given by the formula:
PE = m * g * h
Given:
Mass of the object (m) = 20.0 kg
Change in elevation (h) = 3.0 m
Final speed (v) = 6 m/s
[tex]\\ΔE = Ei - Ef\\ΔE = 588 J - 360 J\\ΔE = 228 J[/tex]
Next, let's calculate the final mechanical energy (Ef):
The energy lost due to friction (ΔE) can be calculated as the difference between the initial mechanical energy and the final mechanical energy:
[tex]ΔE = Ei - Ef\\ΔE = 588 J - 360 J\\ΔE = 228 J[/tex]
Therefore, the object lost 228 J of energy due to friction as it slid down the inclined plane.
Learn more about friction
https://brainly.com/question/28356847
#SPJ11
The drawing shows a parallel plate capacitor that is moving with a speed of 34 m/s through a 4.3-T magnetic field. The velocity v is perpendicular to the magnetic field. The electric field within the capacitor has a value of 220 N/C, and each plate has an area of 9.3 × 10-4 m2. What is the magnitude of the magnetic force exerted on the positive plate of the capacitor?
The magnitude of the magnetic force exerted on the positive plate of the capacitor is 146.2q N.
In a parallel plate capacitor, the force acting on each plate is given as F = Eq where E is the electric field between the plates and q is the charge on the plate. In this case, the magnetic force on the positive plate will be perpendicular to both the velocity and magnetic fields. Therefore, the formula to calculate the magnetic force is given as F = Bqv where B is the magnetic field, q is the charge on the plate, and v is the velocity of the plate perpendicular to the magnetic field. Here, we need to find the magnetic force on the positive plate of the capacitor.The magnitude
of the magnetic force exerted on the positive plate of the capacitor. The formula to calculate the magnetic force is given as F = BqvWhere, B = 4.3 T, q is the charge on the plate = q is not given, and v = 34 m/s.The magnetic force on the positive plate of the capacitor will be perpendicular to both the velocity and magnetic fields. Therefore, the magnetic force exerted on the positive plate of the capacitor can be given as F = Bqv = (4.3 T)(q)(34 m/s) = 146.2q N
to know more about capacitors here:
brainly.com/question/31627158
#SPJ11
This is a simpler circuit than the Digital Light Sensor you built in the previous lab. However, this circuit will be built from written instructions instead of a given schematic. In addition to your breadboard and PSB, you will need three components along with jumper wires, as needed, to connect them. 1. One 10k2 resistor 2. One blue LED 3. One LDR Notice that this lab uses a blue LED instead of the green LED used in the previous lab. The very low current requirements of the green LED that you used in the Digital Light Sensor made it a good choice for that lab. The blue LED used here requires slightly more current than a green LED, but the blue LED is also more sensitive to changes in current. The brightness of the blue LED will vary more with small changes in current. That means that even a small change to the voltage across the blue LED (which drives the current) can have a large effect on its brightness. Use the following instructions to guide you in building your circuit: • Build the circuit across 5V from the PSB. • Make one connection to high potential: • Connect the 10k2 resistor (call it R1) to +5V. • Connect the blue LED (call it D1) in series with R1. • Make two connections to ground: • Connect the low side of D1 to ground. • Connect the light-dependent resistor (call it LDR1) in parallel to D1 (between R1 and ground). Follow these instructions carefully and completely. When you are finished, test the circuit (and troubleshoot if needed) according to the instructions in the next step. In the circuit for this lab: When the resistance of the LDR is low, the potential at the high side of the LED will be pulled down less relative to ground. The voltage across the LED connected in parallel to the LDR will be enough for the LED to light. When the resistance of the LDR is high, the potential at the high side of the LED will be pulled higher , relative to ground. The voltage across the LED connected in parallel to the LDR will not be enough for the LED to light. Removing the LDR from the breadboard would cause the potential at the high side of the LED to be higher than when the LDR is and the LED would turn on and stay on
The behavior of the circuit, as described, suggests that the LED will turn on when the resistance of the LDR is low and turn off when the resistance of the LDR is high. Based on the instructions provided, here's how you can build the circuit using the given components:
1. Take your breadboard and power supply (PSB) and ensure they are connected properly.
2.Connect one end of the 10k2 resistor (R1) to the +5V rail on the breadboard. This will serve as the high potential connection.
3.Connect the other end of R1 in series with the blue LED (D1). The longer leg of the LED is the anode (positive terminal), and the shorter leg is the cathode (negative terminal). Connect the anode (longer leg) of D1 to the free end of R1.
4.Connect the cathode (shorter leg) of D1 to the ground rail on the breadboard. This will be one of the connections to ground.
5.Take the light-dependent resistor (LDR1) and connect it in parallel with the blue LED (D1). Connect one leg of LDR1 to the free end of R1, and connect the other leg to the ground rail on the breadboard. This will be the second connection to ground.
Make sure all the connections are secure and there are no loose wires or accidental short circuits.
Once you have completed the circuit, you can proceed with testing it according to the instructions provided.
Once the circuit is built, you can test it by controlling the amount of light reaching the LDR. Depending on the light conditions, the blue LED will respond as follows:
When the resistance of LDR1 is low (more light), the potential at the high side of the LED (anode) will be pulled down less relative to ground. The voltage across the LED connected in parallel to the LDR will be enough for the LED to light up, and its brightness will depend on the current flowing through it.When the resistance of LDR1 is high (less light), the potential at the high side of the LED will be pulled higher relative to ground. The voltage across the LED connected in parallel to the LDR will not be enough for the LED to light up, and it will remain off.If you remove the LDR1 from the circuit, the potential at the high side of the LED will be higher compared to when the LDR is connected. As a result, the LED would turn on.
To learn more about, circuit, click here, https://brainly.com/question/12608491
#SPJ11
Three resistors, each having a resistance of 25 ohm, are connected in series. What is their effective resistance? A hair dryer and a curling iron have resistances of 15 2 and 25 2, respectively, and are connected in series. They are connected to a 60 V battery. Calculate the current through the circuit.
The current flowing through the circuit is 0.8 Amperes. To find the effective resistance of resistors connected in series, you simply add up the individual resistances.
R_eff = 25 ohms + 25 ohms + 25 ohms = 75 ohms
So, the effective resistance of the three resistors connected in series is 75 ohms.
To calculate the current through the circuit, you can use Ohm's Law, which states that the current (I) flowing through a circuit is equal to the voltage (V) divided by the resistance (R):
I = V / R
In this case, the voltage is given as 60 V and the effective resistance is 75 ohms. Substituting these values into the equation, we get:
I = 60 V / 75 ohms = 0.8 A
Therefore, the current flowing through the circuit is 0.8 Amperes.
Learn more about resistance here : brainly.com/question/32301085
#SPJ11
An ice cube of volume 50 cm 3 is initially at the temperature 250 K. How much heat is required to convert this ice cube into room temperature (300 K)? Hint: Do not forget that the ice will be water at room temperature.
An ice cube of volume 50 cm³ is initially at the temperature of 250K. Let's find out how much heat is required to convert this ice cube into room temperature (300 K)
Solution:
It is given that the initial temperature of the ice cube is 250K and it has to be converted to room temperature (300K).
Now, we know that to convert ice at 0°C to water at 0°C, heat is required and the quantity of heat required is given byQ = mL
where, Q = Quantity of heat required, m = Mass of ice/water and L = Latent heat of fusion of ice at 0°C.
Now, to convert ice at 0°C to water at 0°C, heat is required.
The quantity of heat required is given by:
Q1 = mL1
Where, m = mass of ice
= Volume of ice × Density of ice
= (50/1000) × 917 = 45.85g(1 cm³ of ice weighs 0.917 g)
L1 = Latent heat of fusion of ice = 3.34 × 10⁵ J/kg (at 0°C)
Therefore,
Q1 = mL1 = (45.85/1000) × 3.34 × 10⁵
= 153.32 J
Now, the water formed at 0°C has to be heated to 300K (room temperature).
Heat required is given byQ2 = mCΔT
Where, m = mass of water
= 45.85 g (from above)
C = specific heat capacity of water = 4.2 J/gK (at room temperature)
ΔT = Change in temperature = (300 - 0) K
= 300 K
T = Temperature of water at room temperature = 300K
Therefore, Q2 = mCΔT= 45.85 × 4.2 × 300= 57834 J
Therefore, total heat required = Q1 + Q2= 153.32 J + 57834 J= 57987.32 J
Hence, the heat required to convert the ice cube of volume 50 cm³ at a temperature of 250K to water at a temperature of 300K is 57987.32 J.
To know more about temperature visit :
https://brainly.com/question/7510619
#SPJ11
1.A capacitor C=1000μF initially stores 57μC of charge, and is discharged through a resistor R=2.5kΩ . How much time (in unit of second) is needed for the charge go decrease to 17μC ?
2.When a capacitor C=50μF is charged to 44 volts, how much electric charge (in unit of micro columb) is stored in it?
3.In an RC circuit, the resistance is 12kΩ , and the capacitance 311μF . What is the time constant of the circuit (in unit of second)?
4.A capacitor C=1000μF initially stores 52μC of charge. After being discharged through a resistor R=2kΩ for 1.22 seconds, how much charge (in unit of micro coulomb) is left in the capacitor?
1. Time needed: 0.137 seconds.
2. Electric charge stored: 2.2mC.
3. Time constant: 3.732 seconds.
4. Remaining charge: 22μC.
1. When a capacitor with a capacitance of 1000μF is initially charged with 57μC and discharged through a 2.5kΩ resistor, the time required for the charge to decrease to 17μC can be calculated using the formula for the discharge of a capacitor through a resistor.
The time constant (τ) of the circuit is given by the product of the resistance and capacitance (R × C). In this case, τ = 2.5kΩ × 1000μF = 2.5 seconds. The time required for the charge to decrease to a certain value can be calculated by multiplying the time constant (τ) by the natural logarithm of the initial charge divided by the final charge.
Therefore, the time needed is approximately 0.137 seconds.
2. The electric charge stored in a capacitor can be calculated using the formula Q = C × V, where Q represents the charge, C is the capacitance, and V is the voltage. In this case, the capacitor has a capacitance of 50μF and is charged to 44 volts. Substituting these values into the formula, we find that the electric charge stored in the capacitor is 2.2mC (microcoulombs).
3. The time constant of an RC circuit is a measure of how quickly the voltage across the capacitor reaches approximately 63.2% of its final value during charging or discharging. It is given by the product of the resistance and capacitance (R × C). In this case, the resistance is 12kΩ and the capacitance is 311μF. Multiplying these values together, we find that the time constant of the circuit is approximately 3.732 seconds.
4. When a capacitor with a capacitance of 1000μF and an initial charge of 52μC is discharged through a 2kΩ resistor for 1.22 seconds, we can calculate the remaining charge using the formula Q = Q₀ × e^(-t/RC), where Q is the final charge, Q₀ is the initial charge, t is the time, R is the resistance, and C is the capacitance. Substituting the given values into the formula, we find that the remaining charge in the capacitor is approximately 22μC.
Learn more about Electric charge
brainly.com/question/9194793
#SPJ11
A spinning, solid sphere of mass M and radius R suddenly expands so that its new radius is 2R (and the mass stays the same). If the original rotational kinetic energy is K, the new rotational kinetic energy is a. 2K b. K/4 c. 4K d. still K e. K/2
The new rotational kinetic energy of a solid sphere after it expands so that its new radius is 2R (and the mass stays the same) is K/2.
The moment of inertia of a solid sphere is: I = (2/5)MR².
The original rotational kinetic energy is given by: K = (1/2)Iω₁², where ω₁ is the original angular velocity of the sphere.
After the sphere expands so that its new radius is 2R, its moment of inertia becomes: I' = (2/5)M(2R)² = (8/5)MR².
The new angular velocity of the sphere (ω₂) is not given. However, since no external torque acts on the sphere, its angular momentum (L) is conserved: L = Iω₁ = I'ω₂.
Substituting the expressions for I, I', and solving for ω₂, we get:ω₂ = (ω₁/2).
Therefore, the new rotational kinetic energy of the sphere is given by:
K' = (1/2)I'ω₂²
= (1/2) [(8/5)MR²][(ω₁/2)²]
= (1/2) (2/5)M(R²)ω₁²
= K/2.
Hence, the correct answer is e. K/2.
Learn more about rotational kinetic energy: https://brainly.com/question/30459585
#SPJ11
Many snakes are only able to sense light with wavelengths less than 10 µm. Let's assume a snake is outside during a cold snap. If your coat was the same as the 8°F air temperature, would your coat be radiating sufficient light energy for the snake to see it? If you took off the coat and exposed 75°F clothing, would the snake see your clothing? The relationship between Kelvin temperature and Fahrenheit temperature is T(K)-5/9*(T+459.67).
The snake is unable to sense light beyond 10 µm, the coat will not be detected by the snake. The snake can see the clothing.
Many snakes can only sense light with wavelengths less than 10 µm. Assuming a snake is outside during a cold snap and a person wearing a coat with the same temperature as the 8°F air temperature, would the coat radiate enough light energy for the snake to see it? And, if the coat is taken off and 75°F clothing is exposed, would the snake be able to see it?The light that is sensed by snakes falls in the far-infrared to mid-infrared region of the electromagnetic spectrum.
If we consider the Wein's displacement law, we can observe that the radiation emitted by a body will peak at a wavelength that is inversely proportional to its temperature. For a body at 8°F, the peak wavelength falls in the far-infrared region. If a person is wearing a coat at 8°F, it is highly unlikely that the coat will radiate sufficient energy for the snake to see it since the radiation is primarily emitted in the far-infrared region. Since the snake is unable to sense light beyond 10 µm, the coat will not be detected by the snake.
When the coat is taken off and 75°F clothing is exposed, the clothing will radiate energy in the mid-infrared region since the peak wavelength will be higher due to the increase in temperature. Even though the peak wavelength is in the mid-infrared region, the snake can detect it since the clothing will be radiating energy with wavelengths less than 10 µm.
To know more about light energy visit :
https://brainly.com/question/32493476
#SPJ11
A 20kg mass moving at 10m/s collides with a 10kg mass that is at
rest. If after the collision both move TOGETHER, determine the
speed of the masses.
The speed of the masses moving together after the collision is approximately 6.67 m/s.
To solve this problem, we can use the To solve this problem, we can use the principle of conservation of momentum. Total momentum before the collision should be equal to total momentum after collision.
Before the collision:
Momentum of the 20 kg mass = mass × velocity = 20 kg × 10 m/s = 200 kg·m/s
Momentum of the 10 kg mass (at rest) = 0 kg·m/s
Total momentum before the collision = 200 kg·m/s + 0 kg·m/s = 200 kg·m/s
After the collision:
Let's assume the final velocity of the masses moving together is v.
Momentum of the combined masses after the collision = (20 kg + 10 kg) × v = 30 kg × v
The total momentum prior to and following the impact ought to be identical, according to the conservation of momentum:
Total kinetic energy prior to impact equals total kinetic energy following impact
200 kg·m/s = 30 kg × v
Solving for v:
v = 200 kg·m/s / 30 kg
v ≈ 6.67 m/s
Therefore, the speed of the masses moving together after the collision is approximately 6.67 m/s.
Learn more about the principle of conservation of momentum
https://brainly.com/question/7538238
#SPJ11
Remaining Time: 23 minutes, 44 seconds. ✓ Question Completion Status: L₂ A Moving to another question will save this response. Question 4 0.5 points A stone of mass m is connected to a string of l
Summary:
A stone of mass m is connected to a string of length l. The relationship between the mass and length of the string affects the dynamics of the system. By considering the forces acting on the stone, we can analyze its motion.
Explanation:
When a stone of mass m is connected to a string of length l, the motion of the system depends on several factors. One crucial aspect is the tension in the string. As the stone moves, the string exerts a force on it, known as tension. This tension force is directed towards the center of the stone's circular path.
The stone's mass influences the tension in the string. If the stone's mass increases, the tension required to keep it moving in a circular path also increases. This can be understood by considering Newton's second law, which states that the force acting on an object is equal to the product of its mass and acceleration. In this case, the force is provided by the tension in the string and is directed towards the center of the circular path. Therefore, a larger mass requires a larger force, and thus a greater tension in the string.
Additionally, the length of the string also plays a role in the stone's motion. A longer string allows the stone to cover a larger circular path. As a result, the stone will take more time to complete one revolution. This relationship can be understood by considering the concept of angular velocity. Angular velocity is defined as the rate of change of angle with respect to time. For a given angular velocity, a longer string will correspond to a larger path length, requiring more time to complete a full revolution.
In conclusion, the mass and length of the string are significant factors that influence the dynamics of a stone connected to a string. The mass affects the tension in the string, while the length determines the time taken to complete a revolution. Understanding these relationships allows us to analyze and predict the motion of the system.
Learn more about Acceleration here
brainly.com/question/15295474
#SPJ11
Batman (mass = 98.7 kg) jumps straight down from a bridge into a boat (mass=628 kg) in which a criminal is fleeing. The velocity of the boat is initially +9.88 m/s. What is the velocity of the boat after Batmanlands in it?
The velocity of the boat after Batman lands in it is approximately 8.48 m/s.
To solve this problem, we can apply the principle of conservation of momentum. According to this principle, the total momentum before the jump is equal to the total momentum after the jump.
The momentum is defined as the product of mass and velocity (p = mv). Let's denote the velocity of Batman as Vb and the velocity of the boat as Vboat.
Before the jump:
The momentum of Batman: p1 = m1 * Vb
The momentum of the boat: p2 = m2 * Vboat
After the jump:
The momentum of Batman: p3 = m1 * Vb
The momentum of the boat: p4 = (m1 + m2) * Vfinal
Since momentum is conserved, we can equate the initial momentum to the final momentum:
p1 + p2 = p3 + p4
m1 * Vb + m2 * Vboat = m1 * Vb + (m1 + m2) * Vfinal
We can rearrange the equation to solve for Vfinal:
Vfinal = (m1 * Vb + m2 * Vboat - m1 * Vb) / (m1 + m2)
Plugging in the given values:
m1 (mass of Batman) = 98.7 kg
m2 (mass of the boat) = 628 kg
Vb (velocity of Batman) = 0 m/s (since Batman jumps straight down)
Vboat (initial velocity of the boat) = +9.88 m/s
Vfinal = (98.7 kg * 0 m/s + 628 kg * 9.88 m/s - 98.7 kg * 0 m/s) / (98.7 kg + 628 kg)
Calculating the expression:
Vfinal = 6159.76 kg·m/s / 726.7 kg
Vfinal ≈ 8.48 m/s
To know more about momentum refer to-
https://brainly.com/question/30677308
#SPJ11
A 4.18 kg pendulum hangs in an elevator. The tension in the string supporting the pendulum if the elevator moves downward with a constant velocity is ab.c N
[up]. Input the values of a, band c into the blank and use the guidelines below:
• Do not include a positive or negative sign.
• Include a decimal in your answer.
• Use a acceleration value of 9.81 m/s?
• Let up be positive
A 4.18 kg pendulum hangs in an elevator. The values for a, b, and c in the blank are 4, 0, and 99, respectively.
To find the tension in the string supporting the pendulum when the elevator moves downward with a constant velocity, we need to consider the forces acting on the pendulum.
The two main forces acting on the pendulum are the tension force (T) and the force due to gravity (mg), where m is the mass of the pendulum and g is the acceleration due to gravity (9.81 m/s²).
When the elevator is moving downward with a constant velocity, the net force on the pendulum is zero. Therefore, the tension force and the force due to gravity must be equal in magnitude.
Using Newton's second law (F = ma), where a is the acceleration, we have:
T - mg = 0
Since the mass of the pendulum is given as 4.18 kg and the acceleration due to gravity is 9.81 m/s², we can substitute these values into the equation:
T - (4.18 kg)(9.81 m/s²) = 0
Simplifying the equation:
T = (4.18 kg)(9.81 m/s²)
T = 40.9858 N
Rounding to two decimal places, the tension in the string supporting the pendulum is 40.99 N.
Learn more about velocity-
brainly.com/question/80295
#SPJ11
Two forces are acting on an object. I 250 N at an angle of 49 degrees and FB is 125 N at an angle of 128 degrees. What are the force and angle of the equilibrium force?
The force of equilibrium force is approximately 303.05 N at an angle of 70.5 degrees.
To find the force and angle of the equilibrium force, we need to calculate the resultant force by adding the two given forces.
Let's break down the given forces into their horizontal and vertical components:
Force FA = 250 N at an angle of 49 degrees
Force FB = 125 N at an angle of 128 degrees
For FA:
Horizontal component FAx = FA * cos(49 degrees)
Vertical component FAy = FA * sin(49 degrees)
For FB:
Horizontal component FBx = FB * cos(128 degrees)
Vertical component FBy = FB * sin(128 degrees)
Now, let's calculate the horizontal and vertical components:
FAx = 250 N * cos(49 degrees) ≈ 160.39 N
FAy = 250 N * sin(49 degrees) ≈ 189.88 N
FBx = 125 N * cos(128 degrees) ≈ -53.05 N (Note: The negative sign indicates the direction of the force)
FBy = 125 N * sin(128 degrees) ≈ 93.82 N
To find the resultant force (FR) in both horizontal and vertical directions, we can sum the respective components:
FRx = FAx + FBx
FRy = FAy + FBy
FRx = 160.39 N + (-53.05 N) ≈ 107.34 N
FRy = 189.88 N + 93.82 N ≈ 283.7 N
The magnitude of the resultant force (FR) can be calculated using the Pythagorean theorem:
|FR| = √(FRx^2 + FRy^2)
|FR| = √((107.34 N)^2 + (283.7 N)^2)
≈ √(11515.3156 N^2 + 80349.69 N^2)
≈ √(91864.0056 N^2)
≈ 303.05 N
The angle of the resultant force (θ) can be calculated using the inverse tangent function:
θ = atan(FRy / FRx)
θ = atan(283.7 N / 107.34 N)
≈ atan(2.645)
θ ≈ 70.5 degrees
Learn more about force at https://brainly.com/question/12785175
#SPJ11
a)What is the magnitude of the tangential acceleration of a bug on the rim of an 11.5-in.-diameter disk if the disk accelerates uniformly from rest to an angular speed of 79.0 rev/min in 3.80 s?
b) When the disk is at its final speed, what is the magnitude of the tangential velocity of the bug?
c) One second after the bug starts from rest, what is the magnitude of its tangential acceleration?
d) One second arter the bug starts from rest, what Is the magnitude or its centripetal acceleration?
e) One second after the bug starts from rest, what is its total acceleration? (Take the positive direction to be in the direction of motion.)
a) The magnitude of the tangential acceleration of the bug on the rim of the disk is approximately 1.209 m/s².
b) The magnitude of the tangential velocity of the bug when the disk is at its final speed is approximately 2.957 m/s.
c) One second after starting from rest, the magnitude of the tangential acceleration of the bug is approximately 1.209 m/s².
d) One second after starting from rest, the magnitude of the centripetal acceleration of the bug is approximately 1.209 m/s².
e) One second after starting from rest, the magnitude of the total acceleration of the bug is approximately 1.710 m/s².
To solve the problem, we need to convert the given quantities to SI units.
Given:
Diameter of the disk = 11.5 inches = 0.2921 meters (1 inch = 0.0254 meters)
Angular speed (ω) = 79.0 rev/min
Time (t) = 3.80 s
(a) Magnitude of tangential acceleration (at):
We can use the formula for angular acceleration:
α = (ωf - ωi) / t
where ωf is the final angular speed and ωi is the initial angular speed (which is 0 in this case).
Since we know that the disk accelerates uniformly from rest, the initial angular speed ωi is 0.
α = ωf / t = (79.0 rev/min) / (3.80 s)
To convert rev/min to rad/s, we use the conversion factor:
1 rev = 2π rad
1 min = 60 s
α = (79.0 rev/min) * (2π rad/rev) * (1 min/60 s) = 8.286 rad/s²
The tangential acceleration (at) can be calculated using the formula:
at = α * r
where r is the radius of the disk.
Radius (r) = diameter / 2 = 0.2921 m / 2 = 0.14605 m
at = (8.286 rad/s²) * (0.14605 m) = 1.209 m/s²
Therefore, the magnitude of the tangential acceleration of the bug on the rim of the disk is approximately 1.209 m/s².
(b) Magnitude of tangential velocity (v):
To calculate the tangential velocity (v) at the final speed, we use the formula:
v = ω * r
v = (79.0 rev/min) * (2π rad/rev) * (1 min/60 s) * (0.14605 m) = 2.957 m/s
Therefore, the magnitude of the tangential velocity of the bug on the rim of the disk when the disk is at its final speed is approximately 2.957 m/s.
(c) Magnitude of tangential acceleration one second after starting from rest:
Given that one second after starting from rest, the time (t) is 1 s.
Using the formula for angular acceleration:
α = (ωf - ωi) / t
where ωi is the initial angular speed (0) and ωf is the final angular speed, we can rearrange the formula to solve for ωf:
ωf = α * t
Substituting the values:
ωf = (8.286 rad/s²) * (1 s) = 8.286 rad/s
To calculate the tangential acceleration (at) one second after starting from rest, we use the formula:
at = α * r
at = (8.286 rad/s²) * (0.14605 m) = 1.209 m/s²
Therefore, the magnitude of the tangential acceleration of the bug one second after starting from rest is approximately 1.209 m/s².
(d) Magnitude of centripetal acceleration:
The centripetal acceleration (ac) can be calculated using the formula:
ac = ω² * r
where ω is the angular speed and r is the radius.
ac = (8.286 rad/s)² * (0.14605 m) = 1.209 m/s²
Therefore, the magnitude of the centripetal acceleration of the bug one second after starting from rest is approximately 1.209 m/s².
(e) Magnitude of total acceleration:
The total acceleration (a) can be calculated by taking the square root of the sum of the squares of the tangential acceleration and centripetal acceleration:
a = √(at² + ac²)
a = √((1.209 m/s²)² + (1.209 m/s²)²) = 1.710 m/s²
Therefore, the magnitude of the total acceleration of the bug one second after starting from rest is approximately 1.710 m/s².
Learn more about tangential acceleration from the link given below.
https://brainly.com/question/15743294
#SPJ4
A sinusoidal voltage of 50.0 V rms and a frequency of 100 Hz is applied separately to three different components: first to a 400−Ω resistor, then to a 0.500−H inductor, and finally to a 30.0−μF capacitor. Calculate the maximum current iR,max through the resistor. iR,max= A Calculate the average power PR,average delivered to the resistor. PR, average = W Calculate the maximum current iL,max through the inductor. iL,max= A Calculate the average power PL,average delivered to the inductor. PL, average = W Calculate the maximum current ic,max through the capacitor. ic,max= Calculate the average power PC average delivered to the capacitor. PC, average = W
The average power (PR,average) delivered to the resistor is approximately 6.208 W. For a 0.500 H inductor, the maximum current (iL,max) is approximately 0.1592 A, and the average power (PL,average) delivered to the inductor is zero. In the case of a 30.0 μF capacitor, the maximum current (ic,max) is approximately 0.0942 A, and the average power (PC,average) delivered to the capacitor is also zero.
A sinusoidal voltage of 50.0 V rms and a frequency of 100 Hz is applied separately to a 400 Ω resistor, a 0.500 H inductor, and a 30.0 μF capacitor. We need to calculate the maximum current through each component and the average power delivered to each component.
For the 400 Ω resistor:
The maximum current through the resistor, iR,max, can be calculated using Ohm's Law. The RMS voltage (Vrms) and the resistance (R) are given. The maximum current can be obtained by multiplying the RMS voltage by the square root of 2 and dividing it by the resistance.
iR,max = √2 * Vrms / R
iR,max = √2 * 50.0 V / 400 Ω
iR,max ≈ 0.1766 A
The average power delivered to the resistor, PR,average, can be calculated using the formula:
PR,average = (iR,max^2 * R) / 2
PR,average = (0.1766 A)^2 * 400 Ω / 2
PR,average ≈ 6.208 W
For the 0.500 H inductor:
The maximum current through the inductor, iL,max, can be calculated using the formula:
iL,max = Vrms / (2πfL)
iL,max = 50.0 V / (2π * 100 Hz * 0.500 H)
iL,max ≈ 0.1592 A
The average power delivered to the inductor, PL,average, in an AC circuit is zero because inductors do not dissipate power.
For the 30.0 μF capacitor:
The maximum current through the capacitor, ic,max, can be calculated using the formula:
ic,max = 2πfC * Vrms
ic,max = 2π * 100 Hz * 30.0 μF * 50.0 V
ic,max ≈ 0.0942 A
The average power delivered to the capacitor, PC, average, in an AC circuit is also zero because capacitors do not dissipate power.
To know more about calculating power in AC circuits, refer here:
https://brainly.com/question/33196890#
#SPJ11
4. A rotating merry-go-round makes one complete revolution in 4.0 s. (a) What is the linear speed of a child seated 2.2 m from the center? (6) What is her centripetal acceleration ?
The linear speed of the child is 3.46 m/s. The centripetal acceleration of the child is 5.43 m/s².
One complete revolution of a rotating merry-go-round is completed in 4.0s.
The radius of the rotating merry-go-round, r = 2.2 m.
(a) Linear speed of the child seated at a distance of 2.2 m from the center
We can use the formula for linear speed, which is given by:linear speed
(v) = 2πr / T
where v is the linear speed, r is the radius of the circle, and T is the time taken to complete one revolution of the circle.
Substituting the given values we have;
v = (2 * π * r) / T = (2 * 3.14 * 2.2) / 4 = 3.46 m/s
Therefore, the linear speed of the child is 3.46 m/s.
(b) Centripetal acceleration
Centripetal acceleration is given by the formula:
a_c = v² / r
where a_c is the centripetal acceleration, v is the linear velocity, and r is the radius of the circle.
Substituting the given values we have;
a_c = v² / r = 3.46² / 2.2 = 5.43 m/s²
Therefore, the centripetal acceleration of the child is 5.43 m/s².
Learn more about speed at: https://brainly.com/question/13943409
#SPJ11
The
current through the 3 Q resistor is:
a. 9A
b. 6A
c. 5A
d. 3A
e. 1A
La corriente a través de la resistencia de 3 es: WW 312 9V 6V O A.9A OB.6A O C.5A O D.3A O E 1A
The correct option is d. 3A.
To determine the current through the 3 Ω resistor, we need to use Ohm's Law, which states that the current (I) flowing through a resistor is equal to the voltage (V) across the resistor divided by the resistance (R).
In this case, we are given the voltage across the resistor, which is 9V. The resistance is 3 Ω. Using Ohm's Law, we can calculate the current:
I = V / R
I = 9V / 3Ω
I = 3A
Therefore, the current through the 3 Ω resistor is 3A.
So the correct option is d. 3A.
Learn more about Ohm's Law from this link:
https://brainly.com/question/14796314
#SPJ11
A 0.5 kg block moves to the right and collides with a 3.5 kg block in a perfectly elastic collision. If the initial speed of the 0.5 kg block is 4 m/s and the 3.5 kg starts at rest. What is the final velocity (in m/s) of the 0,5 kg block after
collision?
The final velocity of the 0.5 kg block after the perfectly elastic collision is 4 m/s.
mass m1 = 0.5 kg
v1_initial = 4 m/s
mass m2 = 3.5 kg
v2_initial = 0 m/s
The conservation of momentum can be utilized to find the total speed before collision which is equal to the total speed after collision.
m1 * v1_initial + m2 * v2_initial = m1 * v1_final + m2 * v2_final
Substituting the values into the equation,
(0.5 kg * 4 m/s) + (3.5 kg * 0 m/s) = (0.5 kg * v1_final) + (3.5 kg * v2_final)
2 kg m/s = 0.5 kg * v1_final + 0 kg m/s
It is given that the collision is perfectly elastic, kinetic energy is used here.
The kinetic energy of an object formula is:
KE = (1/2) * m * [tex]v^2[/tex]
= (1/2) * m1 * + (1/2) * m2 * v2_[tex]final^2[/tex] = (1/2) * m1 * v1_[tex]final^2[/tex] + (1/2) * m2 * v2_final
= (1/2) * 0.5 kg * [tex](4 m/s)^2[/tex] + (1/2) * 3.5 kg * [tex](0 m/s)^2[/tex] = (1/2) * 0.5 kg * v1_[tex]final^2[/tex] + (1/2) * 3.5 kg * v2_[tex]final^2[/tex]
= 4 J = (1/2) * 0.5 kg * v1_final^2 + 0 J
Substituting v2_final = v1_initial = 4 m/s, we get:
2 kg m/s = 0.5 kg * v1_final + 0 kg m/s
2 kg m/s = 0.5 kg * v1_final
4 kg m/s = v1_final
Therefore, we can infer that final velocity of the 0.5 kg block is 4 m/s.
To learn more about the Final Velocity
https://brainly.com/question/30898215
#SPJ4
Describe the difference between airspeed, windspeed and
groundspeed when solving vector problems associated with airplane
flight.
Answer:
:))
Explanation:
SCROLL ALL THE WAY DOWN FOR A SHORTER ANSWER.
When solving vector problems associated with airplane flight, it is important to understand the difference between airspeed, windspeed, and groundspeed.
Airspeed is the speed of the airplane relative to the air surrounding it. An airplane's airspeed is measured using an airspeed indicator and is typically expressed in knots. Airspeed does not take into account the effects of wind on the airplane's motion.
Windspeed is the speed and direction of the wind relative to the ground. Windspeed can be measured using a weather station or by observing the effect of the wind on objects such as flags and trees. Windspeed is important in airplane flight because it can affect the airplane's motion by changing its airspeed and direction of flight.
Groundspeed is the speed and direction of the airplane relative to the ground. Groundspeed takes into account the effects of both the airplane's airspeed and the windspeed. In other words, groundspeed is the actual speed and direction at which an airplane is moving over the ground.
When solving vector problems associated with airplane flight, it is important to understand the relationship between airspeed, windspeed, and groundspeed. For example, if an airplane is flying with an airspeed of 100 knots into a headwind with a windspeed of 20 knots, its groundspeed will be slower than its airspeed at only 80 knots. On the other hand, if the airplane is flying with the same airspeed of 100 knots but with a tailwind with a windspeed of 20 knots, its groundspeed will be faster at 120 knots. Therefore, understanding how airspeed, windspeed, and groundspeed are related will help pilots to accurately navigate and plan their flights.
Airspeed is the speed relative to the air. Windspeed is the speed and direction of wind relative to the ground. Groundspeed is the speed and direction relative to the ground. Understanding their relationship is important for accurate navigation and flight planning.
1111. A giraffe, located 1.5m from the center of a Mary-go-round spins with a speed of 6m/s. There is a panda also in the Mary-go-round. How fast would a panda move if its 4.5m from the center(10pts)? what is the angular speed of the Mary-go-round(10pts)?
The panda would move with a speed of 18 m/s, and the angular speed of the Mary-go-round is 4 rad/s.
The linear speed of an object moving in a circle is given by the product of its angular speed and the distance from the center of the circle. In this case, we have the giraffe located 1.5m from the center and moving with a speed of 6 m/s. Therefore, we can calculate the angular speed of the giraffe using the formula:
Angular speed = Linear speed / Distance from the center
Angular speed = 6 m/s / 1.5 m
Angular speed = 4 rad/s
Now, to find the speed of the panda, who is located 4.5m from the center, we can use the same formula:
Speed of the panda = Angular speed * Distance from the center
Speed of the panda = 4 rad/s * 4.5 m
Speed of the panda = 18 m/s
So, the panda would move with a speed of 18 m/s, and the angular speed of the Mary-go-round is 4 rad/s.
Learn more about angular speed:
brainly.com/question/29058152
#SPJ11
If you could please include the formulas needed and explain how to get the answer I would appreciate it so I can learn this type of problem.
A string has both ends fixed. The string is vibrated at a variable frequency. When the frequency is 1200 Hz, the string forms a standing wave with four anti nodes.
(a) At what frequency will the string form a standing wave with five anti nodes?
(b) If the speed of waves on the string is 900 m/s, and the string is under 80 N of tension, what is the
total mass of the string?
The frequency of the wave when there are five anti nodes is 14400 Hz. The total mass of the string is 2.12 x 10⁻⁴ kg.
a) The standing wave that the string forms has anti nodes. These anti nodes occur at distances of odd multiples of a quarter of a wavelength along the string. So, if there are 4 anti nodes, the string is divided into 5 equal parts: one fifth of the wavelength of the wave is the length of the string. Let λ be the wavelength of the wave corresponding to the 4 anti-nodes. Then, the length of the string is λ / 5.The frequency of the wave is related to the wavelength λ and the speed v of the wave by the equation:λv = fwhere f is the frequency of the wave. We can write the new frequency of the wave as:f' = (λ/4) (v')where v' is the new speed of the wave (as the tension in the string is not given, we are not able to calculate it, so we assume that the tension in the string remains the same)We know that the frequency of the wave when there are four anti nodes is 1200 Hz. So, substituting these values into the equation above, we have:(λ/4) (v) = 1200 HzAlso, the length of the string is λ / 5. Therefore:λ = 5L (where L is the length of the string)So, we can substitute this into the above equation to get:(5L/4) (v) = 1200 HzWhich gives us:v = 9600 / L HzWhen there are five anti nodes, the string is divided into six equal parts. So, the length of the string is λ / 6. Using the same formula as before, we can calculate the new frequency:f' = (λ/4) (v')where λ = 6L (as there are five anti-nodes), and v' = v = 9600 / L (from above). Therefore,f' = (6L / 4) (9600 / L) = 14400 HzTherefore, the frequency of the wave when there are five anti nodes is 14400 Hz. Thus, the answer to part (a) is:f' = 14400 Hz
b) The speed v of waves on a string is given by the equation:v = √(T / μ)where T is the tension in the string and μ is the mass per unit length of the string. Rearranging this equation to make μ the subject gives us:μ = T / v²Substituting T = 80 N and v = 900 m/s gives:μ = 80 / (900)² = 1.06 x 10⁻⁴ kg/mTherefore, the mass per unit length of the string is 1.06 x 10⁻⁴ kg/m. We need to find the total mass of the string. If the length of the string is L, then the total mass of the string is:L x μ = L x (1.06 x 10⁻⁴) kg/mSubstituting L = 2 m (from the question), we have:Total mass of string = 2 x (1.06 x 10⁻⁴) = 2.12 x 10⁻⁴ kgTherefore, the total mass of the string is 2.12 x 10⁻⁴ kg.
Learn more about frequency:
https://brainly.com/question/29739263
#SPJ11
A 0.05 kg chunk of ice at 5°C is placed in 0.1 kg of tea at 20°C. At what temperature and in what phase (liquid, solid, or combination) will the final mixture be? In addition, describe what is happening throughout the process on the atomic/molecular level. Cice=2.10kJ/(kg-° K), Cwater = 4.19kJ/(kg° K), Lfice = 333kJ/kg Q = mcAT (if no work is done and no phase transition occurs) Q=+mL (phase transition)
Given that a 0.05 kg chunk of ice at 5°C is placed in 0.1 kg of tea at 20°C, we need to find the temperature and in the total mass of the final mixture = 0.05 + 0.1 = 0.15 kg.
The specific heat capacity of ice, Cice = 2.10 kJ/(kg-°K)The specific heat capacity of water, C water [tex]= 4.19 kJ/(kg°K)Lf for ice is 333 kJ/kg[/tex] Let the final temperature be T °C. we can use the equation Q1 = Q2 to find the final temperature.
We can use Q = mL equation to calculate the heat absorbed by the ice to melt it.[tex]Q = mL= 0.05 kg × 333 kJ/kg = 16.65 kJ[/tex] When the ice melts, it absorbs heat energy and this energy is used to break the intermolecular bonds holding the ice together.
To know more about temperature visit:
https://brainly.com/question/7510619
#SPJ11
Diffraction was first noticed in the 1600s by Francesco Maria Grimaldi. Isaac Newton observed diffraction as well. Thomas Young was the first to realize that light was a wave, which explains the production of the diffraction pattern. You shine light (640 nm) on a single with width 0.400 mm. (a) Find the width of the central maximum located 2.40 m from the slit. m (b) What is the width of the first order bright fringe?
(a) The width of the central maximum located 2.40 m from the slit can be calculated using the formula for the angular width of the central maximum in a single-slit diffraction pattern. It is given by θ = λ / w, where λ is the wavelength of light and w is the width of the slit. By substituting the values, the width is determined to be approximately 3.20 × 10^(-4) rad.(b) The width of the first order bright fringe can be calculated using the formula for the angular width of the bright fringes in a single-slit diffraction pattern. It is given by θ = mλ / w, where m is the order of the fringe. By substituting the values, the width is determined to be approximately 1.28 × 10^(-4) rad.
(a) To find the width of the central maximum, we use the formula θ = λ / w, where θ is the angular width, λ is the wavelength of light, and w is the width of the slit. In this case, the wavelength is 640 nm (or 640 × 10^(-9) m) and the slit width is 0.400 mm (or 0.400 × 10^(-3) m).
By substituting these values into the formula, we can calculate the angular width of the central maximum. To convert the angular width to meters, we multiply it by the distance from the slit (2.40 m), giving us a width of approximately 3.20 × 10^(-4) rad.
(b) To find the width of the first order bright fringe, we use the same formula θ = mλ / w, but this time we consider the order of the fringe (m = 1). By substituting the values of the wavelength (640 × 10^(-9) m), the slit width (0.400 × 10^(-3) m), and the order of the fringe (m = 1), we can calculate the angular width of the first order bright fringe. Multiplying this angular width by the distance from the slit (2.40 m), we find a width of approximately 1.28 × 10^(-4) rad.
Learn more about diffraction here:
https://brainly.com/question/12290582
#SPJ11
To find the width of the central maximum located 2.40 m from the slit, divide the wavelength by the slit width. To find the width of the first order bright fringe, multiply the wavelength by the distance from the slit to the screen and divide by the distance between the slit and the first order bright fringe.
Explanation:To find the width of the central maximum located 2.40 m from the slit, we can use the formula:
θ = λ / w
where θ is the angle of the central maximum in radians, λ is the wavelength of light in meters, and w is the width of the slit in meters.
Plugging in the values, we have:
θ = (640 nm) / (0.400 mm)
Simplifying the units, we get:
θ = 0.640 × 10-6 m / 0.400 × 10-3 m
θ = 1.6 × 10-3 radians
To find the width of the first order bright fringe, we can use the formula:
w = (λL) / D
where w is the width of the fringe, λ is the wavelength of light in meters, L is the distance from the slit to the screen in meters, and D is the distance between the slit and the first order bright fringe in meters.
Plugging in the values, we have:
w = (640 nm × 2.4 m) / 0.400 mm
Simplifying the units, we get:
w = (640 × 10-9 m × 2.4 m) / (0.400 × 10-3 m)
w = 3.84 × 10-6 m
Learn more about Single-Slit Diffraction here:https://brainly.com/question/34067294
#SPJ2
Y Part A What is the air pressure at a place where water boils at 60 °C? Express your answer to three significant figures. IVE ΑΣΦ P ? P= Submit Previous Answers Request Answer X Incorrect; Try Again; 5 attempts remaining Provide Feedback Pa Constants Part A If the humidity in a room of volume 450 m³ at 25 °C is 77 %, what mass of water can still evaporate from an open pan? Express your answer to two significant figures and include the appropriate units. HA ? m= Value Units Submit Provide Feedback Next > Request Answer
The boiling point of water depends on the atmospheric pressure. When the atmospheric pressure increases, the boiling point also increases. On the other hand, as the atmospheric pressure decreases, the boiling point also decreases.
We have to find the atmospheric pressure at a place where the boiling point of water is 60 °C. The boiling point of water depends on the atmospheric pressure. When the atmospheric pressure increases, the boiling point also increases. On the other hand, as the atmospheric pressure decreases, the boiling point also decreases. Thus, we can relate the boiling point of water with atmospheric pressure. The relation is expressed by the following equation: (dp/dt) = (ΔHvap / TΔV).
We know that at standard atmospheric pressure, which is 101.3 kPa, the boiling point of water is 100 °C. Now, we have to find the boiling point of water at 60 °C. The temperature difference between the two boiling points is 40 °C. Thus, we have to find the pressure difference between the two boiling points. We can use the above equation to calculate the pressure difference.Let us assume that the enthalpy of vaporization of water is 40.7 kJ/mol. Also, the change in volume during the transition from liquid to vapor state is 0.018 L/mol.
Thus, dp/dt = (ΔHvap / TΔV) = (40700 J/mol) / (333 K * 0.018 L/mol) = 6635 Pa/KThe boiling point of water at 60 °C is given by, (dp/dt) = (ΔP / ΔT) = ((101.3 kPa - P) / (100 °C - 60 °C)) = 6635 Pa/KSolving for P, we get P = 83.22 kPa.Therefore, the air pressure at a place where water boils at 60 °C is 83.22 kPa.
We have determined that the air pressure at a place where water boils at 60 °C is 83.22 kPa. The boiling point of water is related to atmospheric pressure and we have used the relation between them to calculate the pressure difference between the boiling point of water at 100 °C and 60 °C. By using the value of enthalpy of vaporization and the change in volume during the transition from liquid to vapor state, we have calculated the rate of change of vapor pressure with temperature, which was used to calculate the pressure difference. Finally, we solved for the pressure difference to find the air pressure at a place where water boils at 60 °C.
To know more about boiling point visit:
brainly.com/question/32336971
#SPJ11
If you wish to decrease the power produced in a heating device four times, you could:
A. decrease the current four times, while keeping the resistance the same
B. decrease the voltage four times, while keeping the resistance the same
C. The answer is not listed among the given choices
D. double the resistance, while keeping the voltage the same
If you wish to decrease the power produced in a heating device four times, you could decrease the voltage four times, while keeping the resistance the same. Option B is correct.
The power (P) in an electrical circuit can be calculated using the formula:
P = (V²) / R
Where:
P = Power
V = Voltage
R = Resistance
Since power is directly proportional to the voltage squared and inversely proportional to the resistance, decreasing the voltage four times (V/4) will result in the power being reduced by a factor of (V/4)² = 1/16 (four times four). This will achieve the desired reduction in power.
Hence Option B is correct.
Learn more about power-
brainly.com/question/11569624
#SPJ11
if the sound of splash was amplified by the twenty third wells
harmonic the frequency of this sound was
When the sound of the splash was amplified by the twenty-third harmonic, its frequency experienced a 23-fold increase.
Harmonics represent multiples of the fundamental frequency, which is the lowest frequency present in a sound wave.
The frequency of a sound wave corresponds to the number of wave cycles passing a specific point within one second.
It is measured in hertz (Hz), which represents one cycle per second. When a sound is amplified by a harmonic, it means that the frequency of the sound is multiplied by a whole number. This causes the sound to become louder and more intense.
If the fundamental frequency of the sound was 100 Hz, for example, and it was amplified by the twenty-third harmonic, the resulting frequency would be 100 x 23 = 2300 Hz.
This means that the frequency of the sound was increased by a factor of 23.
Therefore, when the sound of the splash was amplified by the twenty-third harmonic, its frequency experienced a 23-fold increase.
Learn more about frequency at: https://brainly.com/question/254161
#SPJ11
A guitar string has a pluckable length of 56 cm. What is the
length of the 9th harmonic?
The length of the 9th harmonic can be calculated using the formula (1/n) × Length of fundamental frequency, where n is the harmonic number. Given the length of the fundamental frequency, plug in n = 9 to calculate the length of the 9th harmonic.
The length of the 9th harmonic can be determined by using the relationship between harmonics and the fundamental frequency of a vibrating string. In general, the length of the nth harmonic is given by the formula:
Length of nth harmonic = (1/n) × Length of fundamental frequency
In this case, we are interested in the 9th harmonic, so n = 9. The length of the fundamental frequency (first harmonic) is given as 56 cm.
Using the formula, we can calculate the length of the 9th harmonic:
Length of 9th harmonic = (1/9) × 56 cm
Calculating this will give us the answer.
learn more about "frequency":- https://brainly.com/question/254161
#SPJ11
A 5.0−kg box having an initial speed of 1.5 m/s Part A slides along a rough table and comes to rest. Estimate the total change in entropy of the universe. Assume all objects are at room temperature (293 K). Express your answer to two significant figures and include the appropriate units.
The entropy of the universe will increase as a result of any spontaneous process. The entropy of the universe will increase as a result of this process. It is impossible to compute the actual value of entropy since it is based on a complex mathematical model.
the entropy of the universe will increase as a result of any spontaneous process. The entropy of the universe will increase as a result of this process. It is impossible to compute the actual value of entropy since it is based on a complex mathematical model.The first law of thermodynamics states that energy cannot be created or destroyed; rather, it is transferred or converted from one form to another.
The second law of thermodynamics, on the other hand, is concerned with the natural course of things and how they eventually progress to a state of equilibrium or maximum entropy.
Total entropy is the sum of all the entropy changes that occur during a process.
The entropy of the universe will increase as a result of any spontaneous process, according to the second law of thermodynamics, and this process is irreversible.
A 5.0-kg box has an initial speed of 1.5 m/s, and it slides along a rough table and comes to rest.
Estimate the total change in entropy of the universe.
Assume all objects are at room temperature (293 K).
Express your answer to two significant figures and include the appropriate units.
Initial energy of the system = 1/2(m*v^2)
= 1/2(5.0 kg)(1.5 m/s)^2
= 5.625 J
Final energy of the system = 0 J (Box comes to rest)
Change in energy of the system
= Final energy - Initial energy= (0 J) - (5.625 J)
= -5.625 J
As the energy of the system decreased, the energy of the environment increased by an equal amount since energy is conserved, and since the process was irreversible, the entropy of the universe increased.
According to the second law of thermodynamics, the entropy of the universe will increase as a result of any spontaneous process. The entropy of the universe will increase as a result of this process. It is impossible to compute the actual value of entropy since it is based on a complex mathematical model.
To know more about entropy visit;
brainly.com/question/20166134
#SPJ11
a ball hits a wall head on and sticks to it. if instead the ball bounces off the wall with one-half of the original velocity and the collision lasts the same time, the average force on the ball would be times greater. group of answer choices none of them 1.5 2.0 0.5 1.0
The average force on the ball would be 2.0 times greater. When a ball hits a wall head on and sticks to it, the change in velocity is equal to the original velocity of the ball. In this case, the change in velocity is 2 times the original velocity.
If the ball bounces off the wall with one-half of the original velocity, the change in velocity would be half of the original velocity. Therefore, the change in velocity is now 0.5 times the original velocity. Since the collision lasts the same time in both scenarios, we can compare the average force using the formula: force = mass × change in velocity / time.
In the first scenario, the average force would be F₁ = m × (2v) / t.
In the second scenario, the average force would be F₂ = m × (0.5v) / t.
Dividing F₂ by F₁, we get F₂ / F₁ = (m × 0.5v / t) / (m × 2v / t).
The mass (m) and time (t) cancel out, leaving us with F₂ / F₁ = (0.5v) / (2v)
= 0.25.
Therefore, the average force on the ball in the second scenario is 0.25 times the average force in the first scenario.
Since we are comparing the average force, we can take the reciprocal to find the ratio: 1 / 0.25 = 4.
Thus, the average force on the ball would be 4 times greater in the second scenario, which is equivalent to 2.0 times greater.When a ball hits a wall head on and sticks to it, the change in velocity is equal to the original velocity of the ball. In this case, the change in velocity is 2 times the original velocity.
Since we are comparing the average force, we can take the reciprocal to find the ratio: 1 / 0.25 = 4.
Thus, the average force on the ball would be 4 times greater in the second scenario, which is equivalent to 2.0 times greater.
To know more about velocity visit:
https://brainly.com/question/30559316
#SPJ11
A block of mass = 18.8 kg is pulled up an inclined with an angle equal to 15 degrees by a tension force equal to 88 N. What is the acceleration of the block
if the incline is frictionless?
The acceleration of the block, when pulled up the frictionless incline with an angle of 15 degrees and a tension force of 88 N, is approximately 1.23 m/s^2.
To determine the acceleration of the block on the frictionless incline, we can apply Newton's second law of motion. The force component parallel to the incline will be responsible for the acceleration.
The gravitational force acting on the block can be decomposed into two components: one perpendicular to the incline (mg * cos(theta)), and one parallel to the incline (mg * sin(theta)). In this case, theta is the angle of the incline.
The tension force is also acting on the block, in the upward direction parallel to the incline.
Since there is no friction, the net force along the incline is given by:
F_net = T - mg * sin(theta)
Using Newton's second law (F_net = m * a), we can set up the equation:
T - mg * sin(theta) = m * a
mass (m) = 18.8 kg
Tension force (T) = 88 N
angle of the incline (theta) = 15 degrees
acceleration (a) = ?
Plugging in the values, we have:
88 N - (18.8 kg * 9.8 m/s^2 * sin(15 degrees)) = 18.8 kg * a
Solving this equation will give us the acceleration of the block:
a = (88 N - (18.8 kg * 9.8 m/s^2 * sin(15 degrees))) / 18.8 kg
a ≈ 1.23 m/s^2
Learn more about acceleration at https://brainly.com/question/460763
#SPJ11
Using the rules of significant figures,
calculate the multiplication of A = 5.737
and B = 0.45:
The multiplication of A = 5.737 and B = 0.45 is approximately 2.58.
To calculate the multiplication of A = 5.737 and B = 0.45, we can multiply the two numbers together:
A * B = 5.737 * 0.45
Performing the multiplication gives us:
A * B = 2.58165
When dealing with significant figures, we need to consider the least number of significant figures in the original numbers being multiplied.
In this case, both A and B have three significant figures.
Therefore, the result of the multiplication, 2.58165, should be rounded to three significant figures:
A * B = 2.58
So, the multiplication of A = 5.737 and B = 0.45 is approximately 2.58.
Learn more about multiplication from this link:
https://brainly.com/question/1135170
#SPJ11
