The static friction between the block and the plane is [tex]40(\mu_s) \ N[/tex].
The given parameters:
Weight of the block, W = 40 NThe normal reaction on the rough surface due to weight of the block is calculated as follows;
[tex]F_n = 40 \ N[/tex]
The static friction between the block and the plane is calculated as follows;
[tex]F_s = \mu_s F_n[/tex]
where;
[tex]\mu_s[/tex] is coefficient of static frictionThus, the static friction between the block and the plane is [tex]40(\mu_s) \ N[/tex].
Learn more about static friction here: https://brainly.com/question/13680415
The bulb in the circuit shown below does not glow. Which of following labelled parts is responsible for this?
Answer:
answer to this question is c
Answer:
3
Explanation:
because the battery's power is not functioning well
If there were no dark energy in the universe, the value of __________ would solely determine the evolution and fate of the universe.
Answer:
Ωmass
Explanation:
If there were no dark energy in the universe, the value of Ωmass would determine the evolution and fate of the universe.
If astronomers discovered a new planet and found its period of rotation around the Sun to be 105 years, how long would its semi-major axis length be as it orbited the Sun in AU?
From Kepler's third law, its semi-major axis length will be 22.2 AU approximately as it orbited the Sun in AU. The closest option is option C
Given that an astronomers discovered a new planet and found its period of rotation around the Sun to be 105 years.
According to Kepler's third law,
[tex]T^{2} \alpha r^{3}[/tex]
Where
T = Period ( in earth years) = time to complete one orbit
r = Length of the semi major axis in Astronomical unit.
[tex]T^{2}[/tex] = [tex]\frac{4\pi ^{2} }{GM} * r^{3}[/tex]
convert years to seconds
105 x 365 day x 24 hours x 3600 s
T = 3311280000 seconds
Mass of the sun M = 1.989 × 10^30 kg
G = 6.67 x [tex]10^{-11}[/tex]N m^2/kg^2
Substitute all the parameters into the formula
[tex]T^{2}[/tex] = 1.096 x [tex]10^{19}[/tex] = [tex]\frac{4\pi ^{2} }{6.67 * 10^{-11} * 1.989 * 10^{30} } * r^{3}[/tex]
1.096 x [tex]10^{19}[/tex] = 2.976 x [tex]10^{-19}[/tex] [tex]r^{3}[/tex]
[tex]r^{3}[/tex] = 1.096 x [tex]10^{19}[/tex] / 2.976 x [tex]10^{-19}[/tex]
[tex]r^{3}[/tex] = 3.68 x [tex]10^{37}[/tex]
r = [tex]\sqrt[3]{3.68 * 10^{37} }[/tex]
r = 3.33 x [tex]10^{12}[/tex] m
1 AU = 1.5 x [tex]10^{11}[/tex] m
r = 3.33 x [tex]10^{12}[/tex] / 1.5 x [tex]10^{11}[/tex]
r = 22.18 AU
Therefore, its semi-major axis length will be 22.2 AU approximately as it orbited the Sun in AU. The closest option is option C
Learn more about Kepler's laws here: https://brainly.com/question/4639131
Answer:
C. 22.3 AU
Explanation:
Not only is the above an unnecessarily complicated answer, it's not even fully correct, and definitely not what they want you to do.
T^2 = s^3, where T = orbital period and s = semi-major axis length.
Substitute T and you get 105^2 = s^3. Solve for s.
11025 = s^3
3√11025 = s
22.25663649 = s
Therefore, the answer is C. 22.3 AU
use these terms in to show they are related, radiant energy, solar collector, active solar heating system
Answer:
The term "solar collector" commonly refers to a device for solar hot water heating, but may refer to large power generating installations such as solar parabolic troughs and solar towers or non water heating devices such as solar air heaters. radiant energy is the energy of electromagnetic and gravitational radiation.Active solar heating systems use solar energy to heat a fluid;either liquid or air; and then transfer the solar heat directly to the interior space or to a storage system for later use. If the solar system cannot provide adequate space heating, an auxiliary or back-up system provides the additional heat.
pls help me, its just fill in the blank
1. Frequency
2. Reflected
3. Absorbed
4. Black
Helppppp 30pointsssssssssssssssssss
Answer:
so sorry i don't know the answer so sorry
A 1500 kg car travels 50 m north in 20 seconds. What is the magnitude of the average velocity of the car during the 20 second interval?
a. 2.5 m/s
b. 5.0 m/s
c. 6.5 m/s
d. 7.0 m/s
Answer:
a. 2.5 m/s
Explanation:
50 / 20 = 2.5 m/s
These diagrams represent two types of tectonic plate boundaries
Convergent boundaries are caused by the collision of two plates and can originate volcanoes. Transforming boundaries produce fractures by displacement. The correct option is D. Type A boundaries have fewer volcanoes.
----------------------------------------
The crust -the outermost layer of the earth- is divided into many plates that move over the mantle.
These plates are limited by three types of ridges or borders that differ in the movement they produce.
Boundaries types:
I. Divergent:
This boundary occurs when two plates separate and molten material rises from the mantle creating a new crust. The hot material creates a new seabed between the separating plates, expanding the sea bottom.II. Convergent.
Collision area between two plates. Two oceanic plates might collide, or one oceanic plate with a continental one. In this last case, the oceanic crust sinks under the continental plate, and magma rises to the surface by crevices. The thicker and older plate subduces under the other plate. Collisions create volcanic arches and continental arches.
III. Transforming.
The plates slide laterally with each other, and they are usually called faults. It is associated, in general, with the oceanic ridge, although it might also occur in the continental plate. No rocky material is either destroyed or formed. When the plates move and produce a displacement of one transforming limits from side to side, earthquakes occur. The movement breaks the crust and originates pronounced fractures.
In the attached images, we can see
image A representing transforming boundaries, image B representing Convergent boundaries.Image B is the one that can originate volcanoes because transforming boundaries only produce fractures.
So the correct option would be D.
--------------------------------
Learn more about convergent, divergent and transforming boundaries at
https://brainly.com/question/2437823?referrer=searchResults
https://brainly.com/question/2507413?referrer=searchResults
https://brainly.com/question/5082756?referrer=searchResults
https://brainly.com/question/16962517?referrer=searchResults
https://brainly.com/question/16660809?referrer=searchResults
https://brainly.com/question/11162339?referrer=searchResults
https://brainly.com/question/13311455?referrer=searchResults
Answer:
d
Explanation:
A 40W lamp wastes 34 J of energy every second by heating its surroundings.
What is the efficiency of the lamp?
С
18%
D
85%
A
0.15%
15%
B
Answer:
[tex]15\%[/tex].
Explanation:
The efficiency of a machine is the percentage of energy input that was turned into useful energy.
The power rating of this lamp is [tex]40\; \rm W[/tex] (same as [tex]40\; \rm J \cdot s^{-1}[/tex],) meaning that [tex]40\; \rm J[/tex] of energy is supplied to this lamp every second.
The question states that [tex]34\; \rm J[/tex] out of that [tex]40\; \rm J[/tex] of energy input would be turned into heat, which is not useful energy output in this scenario. Assuming that all other forms of energy loss is negligible. The rest of the [tex](40\; \rm J - 34\; \rm J) = 6\; \rm J[/tex] of energy supplied to this lamp would be turned into useful energy output.
Thus, every second, this lamp would receive [tex]40\; \rm J[/tex] of energy input and would outputs [tex]6\; \rm J[/tex] of useful work. The efficiency of this lamp would be:
[tex]\begin{aligned}& \text{Efficiency} \\ =\; & \frac{\text{Useful energy out}}{\text{Total energy in}} \times 100\% \\ =\; & \frac{6\; \rm J}{40\; \rm J} \times 100\%\\ =\; &15\% \end{aligned}[/tex].
What evidence is there that work is being done?
a) A lever is being used.
b) A simple machine makes a task easier.
c) The rock has a larger force than the boy.
d) The boy uses force to move the rock a distance.
Answer:
The boy uses force to move the rock a distance.
As a satellite is accelerated away from the Earth by a rocket, the satellite's mass ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
increases
remains the same
decreases
The mass of the satellite will remain the same when it is accelerated away from the Earth.
The mass of an object is a scalar quantity. This implies that mass of an object can be completely described with magnitude only.
The mass of every object in the universe is independent of the gravity and will always maintain the same value from place to place.
Thus, we can conclude that, the mass of the satellite will remain the same when it is accelerated away from the Earth.
Learn more about mass and scalar quantities here: https://brainly.com/question/21925479
The density of air is 1.3 kg/m'. Calculate the mass of air in the room.
Answer:
The density of air is 1.3 kg/m'. Calculate the mass of air in the room.
Why does calcium chloride have a greater affect on colligative properties verses sodium
chloride?
Answer:
Calcium chloride is very effective, working at temperatures below most products, and is significantly more effective than sodium chloride because of its ability to extract moisture from its surroundings and to cause exothermic or heat generating reactions.
Explanation:
Hope this helps
what is the definition for volume and density
Answer:
volume :: is the level at which something is heard or the amount of space that something takes up.
Density :: is a measure of mass per volume. The average density of an object equals its total mass divided by its total volume.
Answer:
The density, of a substance is its mass per unit volume. The symbol most often used for density is ρ, although the Latin letter D can also be used. Mathematically, density is defined as mass divided by volume: {\displaystyle \rho ={\frac {m}{V}}} where ρ is the density, m is the mass, and V is the volume
how many types Of Ornital does the atomic orbital have ?
Answer:
There are four types of orbitals that you should be familiar with s, p, d and f (sharp, principle, diffuse and fundamental). Within each shell of an atom there are some combinations of orbitals
is atmosphere pressure at high altitudes is less than the pressure at ground, true or false
Answer:
The answer is true I guess!!!
This is because the more you go up to less air it is and the pressure also gets less!!!!!!!!
Explanation:
I HOPE THAT I WAS HELPFUL TO YOU!
Other than temperature, which property also has an effect on the rates of chemical reactions?
A.Color of reactants
B.Concentration of reactants
C.Solubility of reactants
D.Volume of reactants
Other than temperature, the property that also has an effect on the rates of chemical reactions is the concentration of the reactants. The correct answer is B
The rate of chemical reaction means how chemical react with respect to time or as a function of time. The rate of chemical reaction tells us the speed or how fast chemicals react.
There are many factors that can affect the rate of chemical reaction. Temperature is one of them. Increase in temperature will increase the rate at which chemical react.
The color of reactants, solubility of reactants and volume of reactants have nothing to do with the rate of chemical reaction.
Other than temperature, the property that also has an effect on the rates of chemical reactions is the concentration of the reactants.
Other factors affecting the rate of chemical reaction are:
the physical state of the reactants surface area temperature and the presence of a catalystTherefore, the correct answer is option B
Learn more about chemical reaction here: https://brainly.com/question/11231920?source=archive
Which statement explains the first law of thermodynamics?.
Energy is transformed and transferred in a thermodynamic system. Option B is correct
First law of thermodynamics:
It states the energy neither be created nor destroyed. It change its form from one to another. It is also known as law of conservation of energy.
It is given by the formula,
[tex]\Delta U = Q - W[/tex]
Where,
[tex]\Delta U[/tex] - change in internal energy
[tex]Q[/tex] - heat added
[tex]W[/tex]- work done by the system
Since, heat is a form of energy, hence it is follow the principle of conservation of energy.
Therefore, energy is transformed and transferred in a thermodynamic system. Option B is correct
To know more about First law of thermodynamics:
https://brainly.com/question/7107028
Answer:
2: A,D,E or 1,4,5
3: B
4: B
5: 12 joules
6: 53 joules
7: B,C,E or 2,3,5
8: 2,4,3,1
9: Electrical energy in the stove is transformed into heat. The heat flows to the water in the kettle, increasing the internal energy of the water. As the energy in the water increases, the water molecules move faster until the liquid water becomes water vapor. The water vapor does work on the whistle, causing it to make a sound. Energy is neither created nor destroyed, it has simply changed form in the process.
Explanation:
youre welcome
Anyone please.??????
Answer:
468.42572 Wavelength In Metres
Explanation:
Answer:
[tex]\huge\boxed{\sf Wavelength= 470\ m}[/tex]
Explanation:
Given Data:
Speed of light = c = 3 × 10⁸ m/s (Constant)
Frequency = f = 640 kHz = 6.4 × 10² × 10³ Hz = 6.4 × 10⁵ Hz
Required:
Wavelength = λ = ?
Formula:
λ = c / f
Solution:
λ = 3 × 10⁸ / 6.4 × 10⁵
λ = 0.47 × 10³
λ = 4.7 × 10² m
λ = 470 m
[tex]\rule[225]{225}{2}[/tex]
Hope this helped!
~AH1807How long does it take a car traveling at 45km/h to travel 100.0 m?
Answer:
8 seconds
Explanation:
Since the carspeed is in km/h, we need equal units, so we will make 100.0m 0.1000km.
Then we need to find how long it takes the car to travel 0.1km
We can use the formula distance=speed * time and get
0.1=45 * time
Therefore we get .002222... hours
Multiplying this by 3600 (to get seconds, 60x60), we get 8 seconds
Answer:
8m/s
Explanation:
speed = 45km/h
Distance = 100m
we have to find time = ?
Formula for speed is = Distance/ Time
Here Distance is given in 'm' so we need to convert speed value in 'm'
So to convert km/h in m formula is divide 45km/h by 3.6 then the km/h value gets converted in m so now the value is 12.5 m/s
So now,
speed = Distance/Time
we have to find Time
Then,
Time = Distance/ Speed
= 100/12.5
= 8m/s
What is electromagnetic wave ?
its an electric magnetic cell this uses electricity
An astronomical unit (A.U.) is 1 point A) a term for defining the luminosity of a star B) the average distance from the Earth to the sun C) the average distance of any given planet to the sun D) equal to a light year
Answer:
B) the average distance from the Earth to the Sun
Explanation:
The mass of a water skier is 54 kg. Calculate his/her weight if the gravitational field strength is 10 N/kg.
Answer:
weight=mass×gravity
the mass in this question is 54kg and the gravity is 10
therefore:
w=54×10
=540N
I hope this helps
A pilot wishes to fly from airport A to airport B. Airport B is located due south from airport A. The pilots aircraft averages a speed of 160 mi/hr. If the pilot is flying in a wind which blows out of the west at a speed of 40 mi/hr, then the pilot should head his plane in the direction of vector ...
The pilot should head his plane in the direction of vector of 76⁰.
The given parameters;
velocity of the plane due south, a =160 mphvelocity of the wind west, b = 40 mphLet the direction of the vector = θThe direction of the vector can be determined by applying the principle of vector addition;
[tex]tan(\theta) = \frac{v_y}{v_x} \\\\\theta = tan^{-1} (\frac{160}{40} )\\\\\theta = 76 \ ^0[/tex]
Thus, the pilot should head his plane in the direction of vector of 76⁰.
Learn more about direction of vector here:https://brainly.com/question/2142917
if clarisses mass on earth is 52kg what would be her weight on venus if the acceleration due to gravity on that planet is 8.87 m/s^2
Answer:
Weight=F=MA=52*8.87=461.24
the probe used in a medical ultrasound examination emits sound waves in air that have a wavelength of 0.12 mm.
Answer:
IF GOD IS TEIIING YOU SOMETHING JUST DO IT
Explanation:
A 10.0-kg crate slides along a raised horizontal frictionless surface at a constant speed of 4.0 m/s. The crate then slides down a frictionless incline and across a second, roughened horizontal surface as shown in the figure. What is the kinetic energy of the crate as it reaches the lower surface?
The kinetic energy of the crate as it reaches the lower surface is 80 J
Kinetic energy is the energy possed by an object in motion. Mathematically, the kinetic energy can be expressed as follow:
KE = ½mv²
With the above formula, the kinetic energy of the crate can be obtained as follow:
Mass (m) = 10 KgVelocity (v) = 4 m/sKinetic energy (KE) =?KE = ½mv²
KE = ½ × 10 × 4²
KE = 5 × 16
KE = 80 J
Therefore, the kinetic energy of the crate is 80 J
Learn more about kinetic energy: https://brainly.com/question/14449170
A projectile is to be launched at an angle of 30° so that it falls beyond the pond of length 20 meters as shown in the figure.
a) What is the range of values of the initial velocity so that the projectile falls between points M and N?
Answer: A
Explanation:
I want my points so yea
imagine that you’re riding in a car. the car suddenly begins to accelerate forward (positive acceleration). what do you feel as you sit in the seat
Answer:
Because the car is accelerating forward, you will feel your body push backwards, into the back of the seat.
how many bears are witching the category of the
