A 50-kg ice skater turns a bend at 7 m/sec. If the radius of the curve is 5 m, what is the centripetal force in Newtons provided by the friction between the blade of the skate and the ice?

The angle I can rightly be called the angle of reflection.

The incident ray, the reflected ray, and the normal all reside on the same plane, according to the angles of reflection. This suggests that reflection may occur when two angles are in the same plane as the normal.

The angle I and depicted can appropriately be referred to as the angle of reflection in light of the aforementioned information.

Lastly, it is obvious from the image that angle I is the angle of reflection.

Learn more about reflection at:

brainly.com/question/12029226

#SPJ1

When the teacher asked the student to make words out of the jumbled word gzeysktqix, the student was being tested on his ability to unscramble words. Unscrambling words is the process of taking a word or series of letters that are out of order and rearranging them to form a word that makes sense.

When trying to unscramble a word, it is important to look for any patterns that can help identify smaller words within the jumbled letters. This can help make the process easier and quicker. For example, in the jumbled word gzeysktqix, one might notice that the letters "sktqix" appear together.

This could indicate that these letters could potentially form a word. By looking at the remaining letters, one could notice that the letters "g", "z", "e", and "y" could also form smaller words. After some rearranging, the letters can be unscrambled to form the words "sky", "zig", "sex", and "yet". These are just a few examples, as there are likely many other words that can be formed from this jumbled word.

For more such questions on unscramble words, click on:

https://brainly.com/question/28555227

#SPJ8

Answer:

To make a reaction go faster, there are several methods that can be employed depending on the type of reaction and the reactants involved. One common method is to increase the temperature of the reaction mixture, as this typically increases the rate of reaction by providing more energy to the reacting molecules. Another method is to increase the concentration of one or more reactants, as this increases the likelihood of collisions between them. Adding a catalyst can also speed up a reaction by providing an alternative pathway with lower activation energy.

In the case of Samir's slow reaction, warming it up on the stove may be the best option to make it go faster. However, it is important to note that not all reactions can be sped up by simply increasing temperature or concentration, and some reactions may require specific catalysts or conditions to proceed at a reasonable rate. Additionally, it is important to consider safety precautions when attempting to speed up a reaction, as some reactions may become more dangerous at higher temperatures or concentrations.

MARK AS BRAINLIEST!

An observer on the spacecraft would see the light beam moving away from the ship at the speed of light, while an observer on Mars would also see the light beam moving away from the ship at the speed of light. This is because the speed of light is always constant, regardless of the motion of the observer or the light source.

When the ball is hit from the deck of the yacht at 100 mph, it is moving at a speed relative to the yacht.

Since the yacht is moving at 20 mph, the ball would appear to be moving away from the yacht at 100 mph.

This is because the speed of the ball relative to the yacht is 100 mph, while the speed of the yacht relative to the ground is 20 mph.

Therefore, the total speed of the ball relative to the ground would be the sum of the speed of the yacht and the speed of the ball relative to the yacht, which is 120 mph (20 mph + 100 mph).

Now let's consider the Hermes spacecraft traveling at 0.1c past Mars and shining a laser from the front of the ship.

According to the theory of relativity, the speed of light is always the same for all observers, regardless of their motion or the motion of the light source.

So, regardless of the speed of the spacecraft, the light beam would travel away from the ship at the speed of light, c.

An observer on the spacecraft would see the light beam moving away from the ship at the speed of light, while an observer on Mars would also see the light beam moving away from the ship at the speed of light.

This is because the speed of light is always constant, regardless of the motion of the observer or the light source.

In summary, the theory of relativity tells us that the speed of light is always the same for all observers, regardless of their motion or the motion of the light source.

This means that the speed of light is a fundamental constant of the universe, and it plays a crucial role in our understanding of the laws of physics.

For more questions on light

https://brainly.com/question/11666011

#SPJ8

In order to measure the angle of incidence and the angle of refraction using Tracker's protractor tool (the green angle in the video frame), the following steps should be followed:

Step 1: Open the video in Tracker software.

Step 2: Click on the "Measure" button on the toolbar at the top of the software.

Step 3: From the dropdown menu, select "Angle".

Step 4: Click on the "protractor tool" icon (the green angle in the video frame).

Step 5: Position the vertex of the protractor exactly at the origin of the coordinate axis and move the arms of the protractor so that one arm is on the vertical axis (above or below, as appropriate) and the other on the light ray.

Step 6: Measure the angle of incidence and the angle of refraction for the frame numbers specified in the table below by using the step buttons on the right to advance the video a frame at a time.

Step 7: Record the measured angles in the table below. Note that the angle of incidence should be measured on the incident ray (the ray that is coming from the left), and the angle of refraction should be measured on the refracted ray (the ray that is coming from the right).In conclusion, by following these steps, one can measure the angle of incidence and the angle of refraction using Tracker's protractor tool.

For more question Tracker’s protractor tool.

https://brainly.com/question/16772121

#SPJ8

Usually, we use sampling when a population is hard to study, for some reason.

Sampling is a technique commonly employed in research and statistics when it is impractical or impossible to study an entire population directly. It involves selecting a subset, or sample, from the population and using the information gathered from the sample to make inferences about the entire population. This is done with the assumption that the sample is representative of the population and that the findings from the sample can be generalized to the larger population.

There are several reasons why a population might be difficult to study comprehensively. One reason is the size of the population. For example, if the population of interest is the entire world or a country, it would be practically impossible to study each individual in the population due to logistical constraints and limited resources. In such cases, sampling allows researchers to gather information from a smaller, manageable subset of the population.

Another reason for using sampling is when the population is dispersed or geographically scattered. If the population is spread out across a wide area, it can be challenging and costly to reach and collect data from every individual. Sampling allows researchers to select representative individuals or clusters from different regions, making data collection more feasible.

Additionally, there are cases where the population is inaccessible or hard to reach due to privacy concerns or ethical considerations. For example, if the population consists of individuals with certain medical conditions or sensitive personal information, it may be challenging to obtain consent or access to the entire population. In such cases, researchers can use sampling methods to obtain data from a subset of individuals who are willing to participate and meet the necessary criteria.

In summary, sampling is a valuable tool when studying populations that are hard to access, too large, or dispersed. It allows researchers to gather relevant data from a representative subset of the population and make valid inferences about the larger population, despite the challenges posed by studying the population as a whole.

For more such information on:  sampling

https://brainly.com/question/13219833

#SPJ8

The question probable may be:

Usually, we use                  when a population is hard to study, for some reason.

A team of engineers is doing a cost-benefit analysis to determine whether they should develop new technology. Two risks to human health they should include in their analysis are: . Increase in human diseases and Reduced workplace safety.

The correct answer is option A and D.

When conducting a cost-benefit analysis for the development of new technology, it is essential to consider potential risks to human health. Here are two risks that should be included in the analysis:

1. Increase in human diseases:

New technology can bring about various health risks, including an increase in human diseases. Technological advancements often involve the introduction of novel materials, chemicals, or processes that may have adverse effects on human health. For example, the use of certain chemicals in manufacturing processes or the emissions from new machinery can lead to respiratory problems, allergic reactions, or long-term health issues. These risks should be thoroughly assessed, taking into account the potential exposure levels, the toxicity of the substances involved, and the susceptibility of the population.

2. Reduced workplace safety:

Introducing new technology may also impact workplace safety. While advancements can enhance productivity and efficiency, they can also introduce new hazards or change the nature of existing risks. For instance, automated systems or robotics might increase the risk of injuries or accidents if not properly designed, operated, or maintained. The analysis should consider the potential for occupational hazards, such as physical injuries, exposure to harmful substances, ergonomic issues, or psychological stressors. Proper training, safety protocols, and risk mitigation measures should be implemented to minimize these risks.

It is important to note that while risks to human health are significant considerations, a comprehensive cost-benefit analysis should also examine other factors such as economic impacts, environmental sustainability, social implications, and ethical considerations. The analysis should aim to strike a balance between the potential benefits of the new technology and the risks it poses to human health and overall well-being. Inclusion of these risks allows for a more comprehensive evaluation of the feasibility and desirability of developing the new technology.

For more such information on: technology

https://brainly.com/question/7788080

#SPJ8

In order to determine which of the two solutions of salt water is more concentrated, we need to first understand what concentration means and how it is measured. Concentration refers to the amount of solute dissolved in a given amount of solvent. It is typically measured in units of mass per volume, such as grams per liter (g/L) or milligrams per milliliter (mg/mL). so The second solution is more concentrated

When comparing the concentration of two solutions, the one with a higher concentration has more solute dissolved in the same amount of solvent. Therefore, in the picture provided, we can determine which solution is more concentrated by looking at the relative amounts of solute in each solution.If the solutions have the same concentration, then they must have the same amount of solute dissolved in the same amount of solvent. From the picture, we can see that both solutions are in the same size container and have the same amount of solvent (water) in them. Therefore, we can conclude that they have the same concentration of salt.The amount of solute dissolved in a solution can be increased by either adding more solute or by reducing the amount of solvent. If we were to add more salt to one of the solutions, we would increase the concentration of that solution. Alternatively, if we were to evaporate some of the water from one of the solutions, we would reduce the amount of solvent and increase the concentration of that solution.

For more question concentrated

https://brainly.com/question/26288031

#SPJ8

Option C. The heat absorbed or lost by a substance while it's changing state  correctly describes latent heat

Latent heat is the heat absorbed or lost by a substance while it is changing state.

The latent heat is a type of heat that is transferred during phase change, i.e., while a substance undergoes a change of state.

For example, when ice melts into liquid water, or when liquid water evaporates into water vapor, heat is absorbed from the surroundings.

Latent heat is not associated with a temperature change; rather, it's associated with a change of state.

For instance, the temperature of water remains at 100°C while boiling.

When water is boiling, the latent heat of vaporization is absorbed and utilized to break the hydrogen bonds holding water molecules together to change water from the liquid phase to the gaseous phase.

When the water is boiling, adding more heat won't increase the water's temperature, instead, the extra heat will be absorbed to change the phase of water molecules.

Therefore, the correct answer to the given question is option C: The heat absorbed or lost by a substance while it is changing state.

For more questions on latent heat

https://brainly.com/question/10765874

#SPJ8