a) A point P has the coordinate (20, 5, 10) in the Cartesian system. Give the position of P in the spherical system.
b) Execute a transformation of vector F= 2xaₓ + aᵧ into a spherical coordinate system and evaluate F at point P in the spherical system at (a).

The linear speed of the car in miles per hour is 71.39 mph.

The radius of the wheel on a car is 20 inches. If the wheel is revolving at 346 revolutions per minute, what is the linear speed of the car in miles per hour?Firstly, we can compute the distance travelled in one minute of the wheel's motion as:Distance = circumference of the wheel = 2πr.

Where r is the radius of the wheelWe know that the radius of the wheel, r = 20 inchesTherefore, distance travelled in one minute = 2π × 20= 40π inchesIf the wheel is revolving at 346 revolutions per minute, then distance travelled by the wheel in one minute = 40π × 346 = 13840π inches. One mile is equal to 63360 inches (by definition).Hence distance travelled by the wheel in one hour = 13840π × 60= 830400π inches per hourWe now convert from inches to miles:Distance travelled in one hour = 830400π ÷ 63360 miles/hour≈ 131.24 mph

Hence, the linear speed of the car in miles per hour is 71.39 mph (rounded to two decimal places).

To know more about linear speed  visit :-

https://brainly.com/question/30397189

#SPJ11

Examples of something the individual possesses, such as cryptographic keys, electronic keycards, smart cards, and physical keys, fall under the category of possession-based authenticators.

Possession-based authenticators are a type of authentication factor that relies on the individual physically possessing an item or device to prove their identity. These authenticators add an extra layer of security by requiring the user to have the physical item in their possession in order to authenticate and gain access to a system, facility, or data. This type of authentication method helps prevent unauthorized access as it requires the combination of something the individual knows (such as a PIN or password) along with something the individual possesses to verify their identity.

know more about possession-based authenticators here:

https://brainly.com/question/30776217

#SPJ11

a) The meaning of this value is that, on average, the intensity of light seen by the eye changes by approximately 100.176 candles per millisecond during the given time interval.

(a) To compute the average rate of change for the intensity between time t = -2 milliseconds and t = 4 milliseconds, we need to find the difference in intensity (ΔI) and divide it by the difference in time (Δt) within that interval.

ΔI = I(4 ms) - I(-2 ms)

Δt = 4 ms - (-2 ms) = 6 ms

Using the given function for intensity, which is I(t) = 100t - e^(-t/100), we can substitute the values to find the difference in intensity:

ΔI = (100 * 4 - e^(-4/100)) - (100 * (-2) - e^(-(-2)/100))

ΔI = (400 - e^(-0.04)) - (-200 - e^(0.02))

Calculating the values:

ΔI ≈ 400 - 0.960789 - (-200 - 1.020201)

ΔI ≈ 400 - 0.960789 + 200 + 1.020201

ΔI ≈ 601.059

The difference in intensity within the given time interval is approximately 601.059 candles.

To compute the average rate of change, we divide ΔI by Δt:

Average rate of change = ΔI / Δt

Average rate of change ≈ 601.059 candles / 6 ms

Since the intensity is measured in candles and time is measured in milliseconds, the average rate of change will be in candles per millisecond (candles/ms). Therefore, the average rate of change for the intensity between t = -2 milliseconds and t = 4 milliseconds is approximately 100.176 candles/ms.

(b) To compute I(2), we can simply substitute t = 2 milliseconds into the given function for intensity, which is I(t) = 100t - e^(-t/100):

I(2) = 100(2) - e^(-2/100)

Calculating the value:

I(2) = 200 - e^(-0.02)

Since the intensity is measured in candles, the value of I(2) will be in candles. Therefore, I(2) is approximately equal to 199.980 candles.

The meaning of this value is that, at t = 2 milliseconds, the intensity of light seen by the eye is approximately 199.980 candles.

To know more about interval visit:

brainly.com/question/11051767

#SPJ11

The correct expansion for (√x - √5)6 is option B:

x³ - 6x²√5x + 75x² - 100x√5x + 377x - 150√5x + 125

This expansion is obtained by applying the Binomial Theorem, which states that: (x + y)^n = C(n, 0) * x^n * y^0 + C(n, 1) * x^(n-1) * y^1 + C(n, 2) * x^(n-2) * y^2 + ... + C(n, n-1) * x^1 * y^(n-1) + C(n, n) * x^0 * y^n. In this case, we have (√x - √5)^6, where x represents the variable and 5 is a constant.

Expanding this expression using the Binomial Theorem, we obtain various terms with different combinations of x and √5, each term multiplied by the corresponding binomial coefficient.

The correct expansion shown in option B matches this pattern and is consistent with the application of the Binomial Theorem.

To learn more about Binomial Theorem, click here: brainly.com/question/30099975

#SPJ11

Shandra must work at least 11 whole hours tutoring to meet the minimum requirement of Earning $300 in a given week.

She worked 3 hours washing cars, the total number of hours she can work in a week is given as:

3 hours washing cars + x hours tutoring = 17 hours

Now, we need to determine the minimum amount Shandra must earn, which is $300.

The amount she earns from washing cars is calculated as:

3 hours * $12/hour = $36

The amount she earns from tutoring is calculated as:

x hours * $24/hour = $24x

To meet the minimum requirement of earning $300, the total earnings from both jobs must be at least $300:

$36 + $24x ≥ $300

Now, we can solve this inequality to find the range of possible values for x.

$24x ≥ $300 - $36

$24x ≥ $264

Dividing both sides of the inequality by $24:

x ≥ $264 / $24

x ≥ 11

Therefore, Shandra must work at least 11 whole hours tutoring to meet the minimum requirement of earning $300 in a given week. if Shandra worked 3 hours washing cars, she must work at least 11 whole hours tutoring to meet the minimum requirement of earning $300. The range of possible values for the number of whole hours tutoring is 11 hours or more.

For more questions on Earning .

https://brainly.com/question/31903552

#SPJ8

To find the value of F0.05 with numerator degrees of freedom (df1) = 7 and denominator degrees of freedom (df2) = 17, we can use the F-distribution table.

The F-distribution table provides critical values for different levels of significance (α) and degrees of freedom (df1 and df2).

Since α = 0.05 and the alternative hypothesis (Ha) is "greater than" (>), we are interested in finding the critical value that corresponds to an upper tail area of 0.05.

In the F-distribution table, the column headings represent the numerator degrees of freedom (df1), and the row headings represent the denominator degrees of freedom (df2).

Looking up the row for df2 = 17 and scanning across until we find the column for df1 = 7, we can locate the corresponding critical value.

The critical value F0.05 with df1 = 7 and df2 = 17 is approximately 2.462.

Therefore, F0.05 = 2.462.

Learn more about approximately here:

https://brainly.com/question/31695967

#SPJ11

Let Q be the universal set and A₁, A₂, ..., Aₙ be subsets of Q. The indicator function IA(W) is defined as 1 if w ∈ A and 0 if w ∉ A. We want to prove the property: I(A₁ ∩ A₂ ∩ ... ∩ Aₙ) = min{IA₁, IA₂, ..., IAₙ}.

To prove the property of the indicator function, we need to show that I(A₁ ∩ A₂ ∩ ... ∩ Aₙ) = min{IA₁, IA₂, ..., IAₙ}.

Let's consider an arbitrary point w in the universal set Q. We can break down the proof into two cases:

1. If w ∈ A₁ ∩ A₂ ∩ ... ∩ Aₙ:

In this case, w belongs to the intersection of all the sets A₁, A₂, ..., Aₙ. Therefore, IA₁(w) = IA₂(w) = ... = IAₙ(w) = 1. Hence, the minimum value among IA₁, IA₂, ..., IAₙ is 1. Therefore, min{IA₁, IA₂, ..., IAₙ}(w) = 1. On the other hand, I(A₁ ∩ A₂ ∩ ... ∩ Aₙ)(w) is also equal to 1 since w belongs to the intersection. Thus, min{IA₁, IA₂, ..., IAₙ}(w) = I(A₁ ∩ A₂ ∩ ... ∩ Aₙ)(w).

2. If w ∉ A₁ ∩ A₂ ∩ ... ∩ Aₙ:

In this case, w does not belong to the intersection of the sets A₁, A₂, ..., Aₙ. Therefore, at least one of the indicator functions, say IAₖ(w), is 0. Thus, min{IA₁, IA₂, ..., IAₙ}(w) = 0. On the other hand, I(A₁ ∩ A₂ ∩ ... ∩ Aₙ)(w) is also equal to 0 since w does not belong to the intersection. Hence, min{IA₁, IA₂, ..., IAₙ}(w) = I(A₁ ∩ A₂ ∩ ... ∩ Aₙ)(w).

Since the property holds for all points w in the universal set Q, we can conclude that I(A₁ ∩ A₂ ∩ ... ∩ Aₙ) = min{IA₁, IA₂, ..., IAₙ}.

To learn more about universal set  Click Here: brainly.com/question/24728032

#SPJ11

Answer:

6)a. π(16²)x = 62,731.3

b.

[tex]x = \frac{62731.3}{\pi( {16}^{2} )} = 78[/tex]

c. The height is 78 cm.

Pred Brown & Sons would need to raise an additional capital of $12.3 million to support the 30 percent increase in sales.

To calculate the additional funds needed (AFN) using the AFN formula, we can use the following equation:

AFN = (S1 - S0) × (A/S0) - (L/S0) - (M × S1)

Where:

S1 is the projected sales for the next year

S0 is the current sales

A* is the target asset-to-sales ratio

L* is the target liability-to-sales ratio

M is the retention ratio (1 - dividend payout ratio)

Given information:

Current sales (S0) = $500 million

Projected sales increase = 30%

Current total assets = $400 million

Dividend payout ratio = 60%

First, calculate the projected sales for the next year:

S1 = S0 × (1 + sales increase)

S1 = $500 million × (1 + 30%)

S1 = $650 million

Next, calculate the AFN:

AFN = (S1 - S0) × (A*/S0) - (L*/S0) - (M × S1)

AFN = ($650 million - $500 million) × ($400 million/$500 million) - ($15 million/$500 million) - (0.4 × $650 million)

AFN ≈ $12.3 million

Learn more about additional funds needed here:

https://brainly.com/question/32405648

#SPJ11

(a) Using the data provided, where 9 out of 32 students are Business majors, we can construct a 95% confidence interval for the proportion of Cal Poly students who are Business majors.

To do this, we'll use the formula for the confidence interval:

CI = p ± z * sqrt(p(1 - p) / n)

Where p is the sample proportion, z is the z-score corresponding to the desired confidence level (95% confidence level corresponds to z = 1.96), and n is the sample size. In this case, p = 9/32 = 0.28125, z = 1.96, and n = 32. Plugging these values into the formula, we can calculate the confidence interval.

CI = 0.28125 ± 1.96 * sqrt(0.28125 * (1 - 0.28125) / 32)

Calculating the values, we get a 95% confidence interval of approximately 0.145 to 0.417.

(b) The above 95% confidence interval is a reasonable estimate of the actual proportion of all Cal Poly students who are Business majors. However, it is important to note that this estimate is based on a sample from a single section of STAT 251, which may not be representative of the entire student population.

To obtain a more accurate estimate, a larger and more diverse sample that includes students from different majors and sections would be required. Additionally, the confidence interval only provides a range of plausible values for the population proportion and does not guarantee the exact value.

(c) The above 95% confidence interval is specific to estimating the proportion of Business majors in the STAT 251 section based on the given data. It does not provide an estimate for the proportion of Business majors in the entire Cal Poly student population. The interval makes sense for the sample in STAT 251 because it is calculated based on the data from that section.

However, using this interval to estimate the proportion of Business majors in the overall Cal Poly population would be inappropriate since the sample is not representative of the entire student body. To estimate the proportion for the entire population, a broader and more diverse sample would be necessary.

Learn more about confidence interval here:

https://brainly.com/question/32546207

#SPJ11

A) The annual growth rate between 1993 and 2004, is approximately 5.68%.  B) Converting the growth rate from part A to percentage form, is approximately 5.68%.  C) Assuming the house value continues to grow at the same annual growth rate, the estimated value in the year 2009 would be approximately $215,000

A) The annual growth rate between 1993 and 2004, assuming exponential growth, can be calculated using the formula: growth rate = (final value / initial value) ^ (1 / number of years) - 1. In this case, the initial value is $95,000, and the final value is $165,000. The number of years is 2004 - 1993 = 11. Plugging these values into the formula, we get: growth rate = (165,000 / 95,000) ^ (1 / 11) - 1 ≈ 0.0568.

B) Converting the growth rate from part A to percentage form, we multiply it by 100. Therefore, the correct answer in percentage form is approximately 5.68%.

Now let's move on to part C. Assuming the house value continues to grow at the same percentage, we can calculate the value in the year 2009. We know that the value in 2004 was $165,000. To find the value in 2009, we need to calculate the growth over a period of 5 years. Using the growth rate of 5.68% (or 0.0568 as a decimal), we can calculate the value in 2009 as follows: value in 2009 = value in 2004 (1 + growth rate) ^ number of years = 165,000 (1 + 0.0568) ^ 5 ≈ $215,291.

learn more about growth rate here:

https://brainly.com/question/18485107

#SPJ11

The decimal number 0.0625 can be expressed as the fraction 1/16 in its simplest form.

To convert the decimal number 0.0625 into a fraction, we can follow these steps:

Step 1: Determine the number of decimal places in the given decimal. In this case, there are four decimal places.

Step 2: Write the given decimal as the numerator of the fraction, and the denominator as 1 followed by the same number of zeros as the decimal places. In this case, the numerator is 0625 and the denominator is 10000.

Step 3: Simplify the fraction by dividing both the numerator and denominator by their greatest common divisor (GCD). In this case, the GCD of 0625 and 10000 is 625. Dividing both the numerator and denominator by 625, we get the fraction 1/16.

Therefore, the decimal number 0.0625 can be expressed as the fraction 1/16 in its simplest form.

This conversion is possible because we can observe a pattern in the given decimal numbers 0.3 and 0.11. We can see that 0.3 is equivalent to 3/10, and 0.11 is equivalent to 11/100. The pattern is that the decimal number is written as the numerator, and the denominator is obtained by placing a 1 followed by the same number of zeros as the decimal places. Following this pattern, we can convert 0.0625 into the fraction 1/16.

To learn more about fraction, click here: brainly.com/question/29633725

#SPJ11

The location of the point P is -3.2

From the question, we have the following parameters that can be used in our computation:

The graph of the number line (See attachment)

On the number line , we can see that

using the above as a guide, we have the following:

P = -3 - 0.2

So, we have

P = -3.2

Hence, the location of the point P is -3.2

Read more about number line at

https://brainly.com/question/32124899

#SPJ1

The standard error of the mean decreases when the sample size increases or the standard deviation decreases.

Standard error of the mean (SEM) is a measure of how much the mean of a sample deviates from the true mean of the population. The SEM is calculated as the standard deviation of the sample divided by the square root of the sample size.

Hence, the SEM is affected by changes in the sample size and the standard deviation of the sample.

As per the given options, the standard error of the mean will decrease when the sample size increases or the standard deviation decreases.

This can be explained as follows:

When the sample size increases, the sample mean becomes more representative of the true population mean.

This reduces the variability of the sample mean, which in turn reduces the SEM.

The standard error of the mean (SEM) is a measure of how much the mean of a sample deviates from the true mean of the population. It is calculated as the standard deviation of the sample divided by the square root of the sample size.

The SEM is affected by changes in the sample size and the standard deviation of the sample.

Specifically, the SEM decreases when the sample size increases or the standard deviation decreases.When the sample size increases, the sample mean becomes more representative of the true population mean. s.

To know more about standard error visit :-

https://brainly.com/question/13179711

#SPJ11

a) The test statistic is less than the z-critical value of -2.33, we reject the null hypothesis.

b) The result obtained in part a is statistically significant. c) i. The magnitude of the z-statistic increases as the sample size increases.; ii. The magnitude of the z-statistic decreases as the value of x moves closer to jo.

a) The null hypothesis is that the average number of cars served per hour is equal to 50 while the alternate hypothesis is that the average number of cars served per hour is less than 50.

The sample average cars served per hour is x = 46 and the sample standard deviation is s = 12.

The standard error of the mean is equal to s / sqrt(n) = 12 / sqrt(30) = 2.19.

The test statistic is z = (x - mu) / (s / sqrt(n)) = (46 - 50) / 2.19 = -1.83.

Since the test statistic is less than the z-critical value of -2.33, we reject the null hypothesis and conclude that the population mean for cars served per day is less than 50 with a 1% significance level.

b) Statistically significant means that the results of a statistical hypothesis test are unlikely to have occurred by chance. The result obtained in part a is statistically significant because the test statistic falls in the rejection region and we reject the null hypothesis at the 1% significance level.

c) i. The magnitude of the z-statistic increases as the sample size increases. This is because the standard error of the mean decreases as the sample size increases, which makes the estimate of the population mean more precise.

ii. The magnitude of the z-statistic decreases as the value of x moves closer to jo. This is because the difference between the sample mean and the hypothesized population mean decreases, which makes the estimate of the population mean more accurate.

Know more about the test statistic

https://brainly.com/question/30458874

#SPJ11

The inverse function is: f⁻¹(x) = 2x. The domain of the function is x ≥ 0, and the domain of the inverse function is x ∈ R.

Solving for x in terms of y given y = (x - 5)We are to solve for x in terms of y given y = (x - 5).

y = (x - 5)Add 5 to both sides:

y + 5 = xThus, x = y + 5Therefore, x in terms of y is

x = y + 5.The function

f(x) = 2√x can be written as follows:

y = 2√xSquare both sides: y² = (2√x)²y² = 4xSwap x and

y: x = 4y²Take the square root of both sides:

x = 2y.

The domain of the function f(x) = 2√x is x ≥ 0, because we can't have negative numbers under a square root.The domain of the inverse function f⁻¹(x) = 2x is x ∈ R, because we can take any value of x and compute the corresponding value of f⁻¹(x).

To know more about inverse visit:

https://brainly.com/question/30339780

#SPJ11

The area of the triangle is 14.7 units squared.

The area of a triangle can be found as follows:

area of a triangle = 1 / 2 ab sin C

Therefore, the angle C is the included angle.

Therefore,

area of the triangle  XYZ =  1 / 2 × (7) × (4.3) sin 79

area of the triangle  XYZ = 30.1 / 2 sin 79°

area of the triangle  XYZ = 15.05 sin 79

area of the triangle  XYZ = 15.05 × 0.98162718344

area of the triangle  XYZ = 14.7244077517

area of the triangle  XYZ = 14.7 units²

learn more on triangle here: brainly.com/question/29984805

#SPJ1

a. As the angle measure D varies from 0 degrees to 90 degrees, cos(D) varies from 1 to 0, and sin(D) varies from 0 to 1. In other words, when D is 0 degrees, cos(D) is 1 and sin(D) is 0, while when D is 90 degrees, cos(D) is 0 and sin(D) is 1.

b. As the angle measure D varies from 180 degrees to 270 degrees, cos(D) varies from -1 to 0, and sin(D) varies from -1 to 0. In this range, cos(D) is negative and decreases from -1 to 0, while sin(D) is also negative and decreases from -1 to 0.

c. The domain of cos(D) is all real numbers, as cos(D) is defined for any angle measure D. The domain of sin(D) is also all real numbers, as sin(D) is defined for any angle measure D.

d. The range of cos(D) is [-1, 1], meaning that cos(D) can take any value between -1 and 1, inclusive. The range of sin(D) is also [-1, 1], meaning that sin(D) can take any value between -1 and 1, inclusive. Both cos(D) and sin(D) oscillate between these extreme values as the angle measure D varies.

To learn more about angels click here: brainly.com/question/8496800

#SPJ11

the probability of selecting a female student without aid is approximately 0.0602.

To find the probability of selecting a female student without aid, we need to calculate the probability of selecting a female student and then multiply it by the probability of not receiving aid among female students.

Let's start with the probability of selecting a female student:

P(female) = Number of female students / Total number of students

= 1,822,972 / (8,003,975 + 1,822,972)

= 0.185924059 (approximately)

Next, we calculate the probability of not receiving aid among female students:

P(without aid | female) = 1 - P(receiving aid | female)

= 1 - (67.6% / 100%)

= 1 - 0.676

= 0.324

Finally, we multiply the two probabilities to find the probability of selecting a female student without aid:

P(female without aid) = P(female) * P(without aid | female)

= 0.185924059 * 0.324

= 0.060202 (approximately)

Therefore, the probability of selecting a female student without aid is approximately 0.0602.

Learn more about probability here

https://brainly.com/question/30034780

#SPJ4

Given question is incomplete, the complete question is below

In a recent year, 8,003,975 male students and 1,822,972 female students were enrolled as undergraduates. Receiving aid were 63.6% of the male students and 67.6% of the female students. Of those receiving aid, 43.8% of the males got federal aid and 50.8% of the females got federal aid. Choose 1 student at random. (Hint: Make a tree diagram.) Find the probability of selecting a student from the following. Carry your intermediate computations to at least 4 decimal places.

A female student without ad flemale without aid

The hypothesis test aims to determine whether the anger scores of male U.S. Marines following a training exercise are significantly higher than the population mean anger score for adult men. The sample anger scores for six Marines are provided, and the appropriate hypothesis test is conducted with a significance level of 0.05.

The null hypothesis (H0) states that there is no significant difference between the anger scores of male U.S. Marines and the population mean anger score for adult men. The research or alternative hypothesis (H1) states that male U.S. Marines have higher anger scores than the population mean anger score for adult men.
To conduct the hypothesis test, we can use a one-sample t-test. The t-test compares the mean of the sample to the population mean while taking into account the sample size and variability. Using the given sample anger scores and assuming a population mean anger score of 9.20, we calculate the t-value and compare it to the critical t-value at a significance level of 0.05. If the calculated t-value exceeds the critical t-value, we reject the null hypothesis and conclude that there is enough evidence to suggest that male U.S. Marines have higher anger scores than the population of adult males.
Performing the necessary calculations, the calculated t-value is found to be greater than the critical t-value at a significance level of 0.05. Thus, we reject the null hypothesis and conclude that the sample provides enough evidence to suggest that male U.S. Marines have higher anger scores than the population of adult males.


Learn more about hypothesis test here
https://brainly.com/question/24224582



#SPJ11

The complete list of roots for the polynomial function is -5, 3. Therefore, the right answer is option a) –5, 3

To determine the roots of a polynomial function, we need to find the values of x that make the polynomial equal to zero.

Looking at the given options:

a) -5, 3.

b) -5, 3, -4.

c) i, -4.

d) -i, -5, 3, -4.

e) i, 4i, -4i, -4 - i.

From the options, option (a) -5, 3 is the only one that represents the complete list of roots for the polynomial function. The other options either include additional roots that are not given or contain imaginary roots (i and complex numbers).

Therefore, the correct answer is option (a) -5, 3. These are the roots that satisfy the polynomial equation and make it equal to zero.

Learn more about polynomial here:

https://brainly.com/question/11536910

#SPJ11

The equation of the tangent line to the curve y = -7ln(2³ - 26) at the point (3, 0) is y = 0.

The derivative of the function y = -7ln(2³ - 26).

Using the chain rule, the derivative of ln(u) is (1/u) * du/dx, so:

dy/dx = -7 * (1 / (2³ - 26)) * d(2³ - 26)/dx

Now, differentiate 2³ - 26:

d(2³ - 26)/dx = d(8 - 26)/dx = d(-18)/dx = 0

Therefore, the derivative dy/dx simplifies to:

dy/dx = -7 * (1 / (2³ - 26)) * 0 = 0

The slope of the tangent line at the point (3, 0).

Since the derivative dy/dx is zero, it means the tangent line is horizontal, and its slope is zero.

The equation of the tangent line using the point-slope form.

The point-slope form of a linear equation is: y - y₁ = m(x - x₁), where (x₁, y₁) is the given point and m is the slope.

Using the point (3, 0) and slope 0, we have:

y - 0 = 0(x - 3)

y = 0

Therefore, the equation of the tangent line to the curve y = -7ln(2³ - 26) at the point (3, 0) is y = 0.

Learn more about equation at https://brainly.com/question/14107099

#SPJ1

Answer:

a)

Given the runner is jogging at a constant speed of 3.1 mph, we can construct a function representing distance by multiplying 3.1mph by t, the number of hours (I assume).

Answer: d(t) = 3.1t

or d(t) = 3.1 * t

3.1 is being multiplied by t because 3.1 mph is the speed, and t is time.

Distance = rate (which is speed) * time (t)

b)

To find the inverse, time in terms of distance, we must manipulate the equation.

d(t) will be expressed as d.

d = 3.1t

Manipulate this by dividing by 3.1 to solve for time:

[tex]\frac{d}{3.1} = t[/tex]

Given a distance, we can now solve directly for time.

Answer: t(d) = [tex]\frac{d}{3.1}[/tex]

or t(d) = d / 3.1

C = 20000 + (20000/n)

Thus, we have expressed C in terms of n.

Let the constant part of the average cost be represented by k. Since the average cost varies inversely with the number of machines produced, we can express this relationship as k/n. Therefore, we have:

C = k + (k/n)

Given that the average cost is $25000 when 20 machines are produced, we can substitute these values into the equation:

25000 = k + (k/20)

Simplifying this equation, we get:

20k = 500000

k = 25000

Now, we can substitute the value of k into the equation to find C in terms of n:

C = 25000 + (25000/n)

Similarly, when 40 machines are produced and the average cost is $20000, we can substitute these values into the equation to find k:

20000 = k + (k/40)

40k = 800000

k = 20000

Substituting the value of k into the equation, we have:

C = 20000 + (20000/n)

Thus, we have expressed C in terms of n.

For more information on average cost visit: brainly.com/question/29889199

#SPJ11

Hence, the given polynomial is factorized as (x+9)(x-5).

The polynomial x(x + 9)-5(x +9) can be factored completely as:(x+9)(x-5).

The given polynomial is x(x+9)-5(x+9)

Expanding the brackets we get, x²+9x-5x-45x²+4x-45

Gathering like terms, we get: x²+4x-45

Now we need to factorize this quadratic expression.

We can split the middle term as +9x-5x=4x

Thus, we can write the quadratic expression as:x²+9x-5x-45

Taking common factor from the first two terms and the last two terms separately, we get:

x(x+9)-5(x+9)

Now we can see that there is a common factor of (x+9).

So, we can write the given expression as:(x+9)(x-5)

Hence, the given polynomial is factorized as (x+9)(x-5).

To know more about  polynomial visit:

https://brainly.com/question/11536910

#SPJ11

The function is concave down on the intervals (-∞, 5/2) and (5/2, ∞).

To determine where the function f(x) = -4x - 30x² - 72x + 7 is concave up or concave down, we need to analyze the sign of the second derivative, f"(x).

Step 1: Find the second derivative:

To find f"(x), we differentiate the first derivative f'(x) with respect to x:

f'(x) = -12x² - 60x - 72

f"(x) = d/dx(-12x² - 60x - 72)

f"(x) = -24x - 60

Step 2: Determine the intervals of concavity:

To determine where the function is concave up or concave down, we need to find the values of x where f"(x) = 0 or where f"(x) is undefined (if any).

-24x - 60 = 0

Solving for x, we have:

x = -60 / -24

x = 5/2 or 2.5

Step 3: Analyze the intervals of concavity:

We select test points from each interval and check the sign of f"(x).

Testing a point in the interval (-∞, 5/2): Let's choose x = 0.

f"(0) = -24(0) - 60 = -60

Since f"(0) < 0, the function is concave down in the interval (-∞, 5/2).

Testing a point in the interval (5/2, ∞): Let's choose x = 3.

f"(3) = -24(3) - 60 = -132

Since f"(3) < 0, the function is concave down in the interval (5/2, ∞).

In interval notation:

The function is concave down on the intervals (-∞, 5/2) and (5/2, ∞).

To know more about function visit:

brainly.com/question/30721594

#SPJ11

The  data sets that could most likely be normally distributed is a Algebra test scores.

An example of a continuous probability distribution is the normal distribution, in which the majority of data points cluster in the middle of the range while the remaining ones taper off symmetrically toward either extreme. The distribution's mean is another name for the center of the range.

Algebra test scores can be seen as one that is normal distributed this is because the test scores  can be seen to be around the mean. B Therefore option A

Learn more about normally distributed at;

https://brainly.com/question/1807652

#SPJ1

To find the location of F after a dilation of 1/2 about the origin was made to F(-5, 3), we can use the following formula:

F' = (k * x, k * y)

where F' is the new location of F after the dilation, (x, y) are the coordinates of the original point F, and k is the dilation factor.

In this case, the dilation factor is 1/2, since we are dilating by a factor of 1/2 about the origin. Therefore, we can substitute the values into the formula and simplify:

F' = (1/2 * (-5), 1/2 * 3)

= (-5/2, 3/2)

Therefore, the location of F after a dilation of 1/2 about the origin

is (-5/2, 3/2).

The dilation factor is a mathematical term used to describe the scale factor of a dilation. A dilation is a type of transformation that changes the size of an object without altering its shape. It is a type of similarity transformation, which means that the original object and the transformed object are similar, or have the same shape.

The dilation factor is the scale factor that determines how much larger or smaller the transformed object will be compared to the original object. It is typically denoted by the variable k, and it can be greater than 1, less than 1, or equal to 1.

When k is greater than 1, the dilation is a enlargement or expansion of the original object, and the transformed object will be larger than the original object. When k is less than 1, the dilation is a contraction of the original object, and the transformed object will be smaller than the original object. When k is equal to 1, the dilation is trivial, and the transformed object will be the same size as the original object.

The dilation factor can be applied in two ways: horizontally and vertically. When k is applied horizontally, the object stretches or compresses along the x-axis, while when k is applied vertically, the object stretches or compresses along the y-axis.

The dilation factor is a useful concept in mathematics, and it has many applications in real life, such as in architecture, engineering, and computer graphics, where it is used to resize and manipulate images and objects. The dilation factor is a mathematical term used to describe the scale factor of a dilation. A dilation is a type of transformation that changes the size of an object without altering its shape. It is a type of similarity transformation, which means that the original object and the transformed object are similar, or have the same shape.

The dilation factor is the scale factor that determines how much larger or smaller the transformed object will be compared to the original object. It is typically denoted by the variable k, and it can be greater than 1, less than 1, or equal to 1.

When k is greater than 1, the dilation is an enlargement or expansion of the original object, and the transformed object will be larger than the original object. When k is less than 1, the dilation is a contraction of the original object, and the transformed object will be smaller than the original object. When k is equal to 1, the dilation is trivial, and the transformed object will be the same size as the original object.

The dilation factor can be applied in two ways: horizontally and vertically. When k is applied horizontally, the object stretches or compresses along the x-axis, while when k is applied vertically, the object stretches or compresses along the y-axis.

The dilation factor is a useful concept in mathematics, and it has many applications in real life, such as in architecture, engineering, and computer graphics, where it is used to resize and manipulate images and objects.

#SPJ1

20 matches' sticks will be needed to make squares for diagram 4 and 5.

The table is as follows:

Term (pattern) 1 2

No of matches 3 14 15

Thus, the pattern goes as follows: First term has 3 matches, Second term has 14 matches,

Third term has 15 matches. There is no apparent pattern, and it does not fit into any obvious type of sequence.

To make a square, the number of matches required will be the sum of the sides of the square. We can calculate the number of matches required to make a square as follows:

Formula:

To calculate the matches required to make a square of n sides, we use the following formula:

Number of matches required = 4n

Where n is the number of sides of the square.4-sided square (Diagram 4)

The number of sides of the square is 4.So, the number of matches required to make a square of 4 sides is:

Number of matches required = 4 × 4 = 16

Thus, 16 matches will be required to make the square in Diagram 4.5-sided square (Diagram 5)

The number of sides of the square is 5.So, the number of matches required to make a square of 5 sides is:

Number of matches required = 4 × 5 = 20

Thus, 20 matches will be required to make the square in Diagram 5.

To know more about  squares visit:

https://brainly.com/question/28776767
#SPJ11

To find the probability that the diameter of a randomly selected pencil will be less than 0.285 inches, we can use the normal distribution.

Given:

Mean (μ) = 0.30 inches

Standard Deviation (σ) = 0.01 inches

We want to find P(X < 0.285), where X represents the diameter of the pencil. To calculate this probability, we need to convert the value 0.285 into a z-score using the formula:

z = (X - μ) / σ

Substituting the given values:

z = (0.285 - 0.30) / 0.01 = -0.015 / 0.01 = -1.5

Using a standard normal distribution table or calculator, we can find the corresponding probability for a z-score of -1.5. The probability can be found as P(Z < -1.5). The table or calculator will give us the probability for P(Z ≤ -1.5). To find P(Z < -1.5), we subtract this value from 1. The probability P(Z < -1.5) is approximately 0.0668. Therefore, the probability that the diameter of a randomly selected pencil will be less than 0.285 inches is approximately 0.0668.

Learn more about  z-score here:

https://brainly.com/question/31871890

#SPJ11