The time taken by the ball to fall through a distance of 30m is, 2 seconds
To calculate the time taken to fall through a distance of 30m, we have given data as,
mass of ball = 200g
g = 10 m/s^2
Initial height = 50 meter
Final height = 30 meter
So by the laws of motion, we have,
Δh = (ut) + (at²/2)
where, (u = initial velocity), and (t = time)
So,
50-30 = (0.t) + [10 x t²)/2]
20 = 5t²
Therefore, t = ± (2 seconds)
On eliminating the negative value as time can`t be negative here, we get
t = 2 seconds
Therefore, the time taken by the ball to fall through a distance of 30m is, 2 seconds
Read more about free fall at:
https://brainly.com/question/12167131
What is the inertia of motion?
Answer:
The ability of a body to resist changes to its uniform motion condition is known as inertia of motion.
___________________
Hope this helps!
Why might earthquakes be much more intense closer to the initial disturbance than they are further away
Sean throws a baseball at an angle of 25 relative to the ground at a speed of 23m/s. What is the maximum height the ball will achieve? How long will it be in the air? How far away does Kelly need to be to catch the ball?
Answer:
To solve this problem, we can use the equations of motion for projectile motion:
- Vertical displacement: Δy = v₀sinθt - 1/2gt²
- Vertical velocity: v = v₀sinθ - gt
- Time of flight: T = 2v₀sinθ/g
- Horizontal displacement: Δx = v₀cosθt
where v₀ is the initial speed, θ is the angle of projection, g is the acceleration due to gravity (9.81 m/s²), t is the time of flight, and Δy and Δx are the vertical and horizontal displacements, respectively.
First, we can find the maximum height by using the equation for vertical displacement:
Δy = v₀sinθt - 1/2gt²
At the maximum height, the vertical velocity is zero, so we can find the time of flight by setting the vertical velocity equation to zero:
v = v₀sinθ - gt = 0
Solving for t, we get:
t = v₀sinθ/g
Substituting this into the equation for vertical displacement, we get:
Δy = v₀sinθ(v₀sinθ/g) - 1/2g(v₀sinθ/g)²
Simplifying, we get:
Δy = (v₀²sin²θ)/(2g)
Substituting the given values, we get:
Δy = (23²sin²25)/(2*9.81) ≈ 29.4 m
So the maximum height is approximately 29.4 meters.
Next, we can find the time of flight using the equation for time of flight:
T = 2v₀sinθ/g
Substituting the given values, we get:
T = 2*23*sin25/9.81 ≈ 3.5 s
So the time of flight is approximately 3.5 seconds.
Finally, we can find the horizontal displacement using the equation for horizontal displacement:
Δx = v₀cosθt
Substituting the given values, we get:
Δx = 23*cos25*3.5 ≈ 64.3 m
So Kelly needs to be approximately 64.3 meters away to catch the ball.
What particle carries electric charge between your body and carpet when you experience static electricity?
Answer:
an electron.
Explanation:
When you walk on a carpet, some of the electrons from the atoms in the carpet are transferred to your body, giving you a negative charge. The electrons are then transferred back to the carpet when you touch a conductor, such as a doorknob, which can give you a shock due to the discharge of the static electricity.
list 5 importance of energy
Answer:
1. Energy powers our homes and businesses.
2. Energy is necessary for transportation.
3. Energy is required for manufacturing and industrial processes.
4. Energy is essential for agriculture and food production.
5. Energy is needed for healthcare and medical equipment.
6. Energy is critical for national defense and security.
7. Energy is required for communication and technology.
8. Energy is vital for education and research.
9. Energy is necessary for entertainment and leisure activities.
10. Energy is fundamental for maintaining a high standard of living.
11. Energy is necessary for economic growth and development.
12. Energy is essential for reducing poverty and improving quality of life.
13. Energy is required for environmental protection and sustainability.
14. Energy is critical for disaster relief and emergency response.
15. Energy is needed for space exploration and research.
16. Energy is important for cultural preservation and heritage.
17. Energy is necessary for water treatment and distribution.
18. Energy is required for waste management and recycling.
19. Energy is vital for public safety and law enforcement.
20. Energy is necessary for aviation and air travel.
21. Energy is essential for shipping and transportation of goods.
22. Energy is required for mining and natural resource extraction.
23. Energy is critical for oil and gas production.
24. Energy is needed for renewable energy research and development.
25. Energy is important for alternative fuel sources and technology.
26. Energy is necessary for energy storage and distribution.
27. Energy is essential for energy efficiency and conservation.
28. Energy is required for climate change mitigation and adaptation.
29. Energy is vital for international cooperation and diplomacy.
30. Energy is necessary for transportation infrastructure development.
31. Energy is required for public transportation systems.
32. Energy is critical for rural and remote communities.
33. Energy is needed for urban development and growth.
34. Energy is important for public health and sanitation.
35. Energy is necessary for disaster preparedness and response.
36. Energy is essential for emergency services and first responders.
37. Energy is required for military operations and equipment.
38. Energy is critical for scientific research and innovation.
39. Energy is needed for space heating and cooling.
40. Energy is important for water heating and distribution.
41. Energy is necessary for appliance and electronic usage.
42. Energy is essential for lighting and electricity.
43. Energy is required for cooking and food preparation.
44. Energy is critical for refrigeration and food storage.
45. Energy is needed for laundry and cleaning.
46. Energy is important for personal hygiene and grooming.
47. Energy is necessary for entertainment and leisure activities.
48. Energy is essential for sports and recreation.
49. Energy is required for tourism and travel.
50. Energy is critical for the arts and culture.
51. Energy is needed for social and community events.
52. Energy is important for festivals and celebrations.
53. Energy is necessary for religious and spiritual practices.
54. Energy is essential for personal communication and relationships.
55. Energy is required for social media and online interactions.
56. Energy is critical for telecommuting and remote work.
57. Energy is needed for internet connectivity and usage.
58. Energy is important for e-commerce and online shopping.
59. Energy is necessary for financial transactions and banking.
60. Energy is essential for education and online learning.
61. Energy is required for healthcare and telemedicine.
62. Energy is critical for legal and government services.
63. Energy is needed for transportation and delivery services.
64. Energy is important for customer service and support.
65. Energy is necessary for manufacturing and supply chain management.
66. Energy is essential for research and development.
67. Energy is required for data centers and cloud computing.
68. Energy is critical for cybersecurity and privacy protection.
69. Energy is needed for artificial intelligence and machine learning.
70. Energy is important for autonomous vehicles and drones.
71. Energy is necessary for robotics and automation.
72. Energy is essential for virtual and augmented reality.
5. An elephant has weight of 48000N and exerts pressure of 60000 Pa on the ground. What is the area of the elephant's feet in contact with the ground?
a. 1.25 m^2
b. 0.8 m^2
c. 2.0 m^2
d. 8.0 m^2
Answer:
A 1.25 m²
Explanation:
A megaphone amplifies sound by
all the above
increasing the range of frequencies that can be produced.
focusing sound energy into one specific direction.
spreading out the sound waves over a large area.
Price $15 12 9 6 3 Quantity Demanded per Month 1 2 3 5 7 Price $15 12 9 6 3 In the BOX what you would expect to see if you plotted the numbers on the graph. The quantit demand pe month dec 0 1 2 3 4 5 6 7 Quantity b. It costs Charlene $2.00 to ride to bus to the dog owners house each time she goes. What number of dog walks will give her the most profit?
From the table, we can see that Charlene will have the most profit ($21) when she walks 3 dogs per month, charging $9 per walk.
How to solve
Based on the provided data, we can create a demand schedule for the prices and the quantity demanded per month.
Let's first organize the data in a table:
Price ($) Quantity Demanded per Month
15 1
12 2
9 3
6 5
3 7
If you plotted these numbers on a graph, you would expect to see a downward-sloping curve, illustrating the inverse relationship between price and quantity demanded. As the price decreases, the quantity demanded per month increases.
Now let's consider Charlene's costs and profits from walking dogs. It costs her $2.00 for each bus ride to the dog owner's house.
To calculate her profit, we need to find her total revenue at each price point, then subtract her total costs.
Price ($) Quantity Demanded per Month Total Revenue ($) Total Costs ($) Profit ($)
15 1 15 2 13
12 2 24 4 20
9 3 27 6 21
6 5 30 10 20
3 7 21 14 7
From the table, we can see that Charlene will have the most profit ($21) when she walks 3 dogs per month, charging $9 per walk.
Read more about demand schedule here:
https://brainly.com/question/2181062
#SPJ1
What is the critical angle between polycarbonate (n1 = 1.58) and quartz (n2 = 1.41)?
24 degrees
46 degrees
63 degrees
75 degrees
Answer:
Approximately [tex]63.2^{\circ}[/tex].
Explanation:
The refractive index [tex]n[/tex] gives the ratio between the speed of light in vacuum and the speed of light in the given material. A larger refractive index means slower speed of light in the medium. In this question, the speed of light is slower in polycarbonate than in quartz.
When light travels from a material of low light speed to a material of higher light speed, the angle of refraction [tex]\theta_{r}[/tex] will exceed the angle of incidence [tex]\theta_{i}[/tex] (both with respect to the normal.)
The critical angle at this interface is the [tex]\theta_{i}[/tex] for which [tex]\theta_{r} = 90^{\circ}[/tex]. Note that since [tex]\theta_{i}\![/tex] cannot exceed [tex]90^{\circ}[/tex], [tex]\theta_{i} < \theta{r}[/tex] and light must be entering a faster medium from a slower medium. In this question, light would be entering quartz ([tex]n = 1.41[/tex], faster) from polycarbonate ([tex]n = 1.58[/tex], slower.)
By Snell's Law:
[tex]n_{i}\, \sin(\theta_{i}) = n_{r}\, \sin(\theta_{r})[/tex],
Where:
[tex]n_{i}[/tex] is the refractive index of the medium from which light enters, [tex]n_{r}[/tex] is the refractive index of the medium light enters into,[tex]\theta_{i}[/tex] is the angle of incidence at which light enters the interface (with respect to the normal), and[tex]\theta_{r}[/tex] is the angle of refraction at which light leaves the interface (also with respect to the normal.)Set [tex]n_{i} = 1.58[/tex] (polycarbonate), [tex]n_{r} = 1.41[/tex] (quartz), and [tex]\theta_{r} = 90^{\circ}[/tex]. Rearrange the equation and solve for [tex]\theta_{i}[/tex]:
[tex]\begin{aligned}\sin(\theta_{i}) &= \frac{n_{r}\, \sin(\theta_{r})}{n_{i}} \end{aligned}[/tex].
[tex]\begin{aligned}\theta_{i} &= \arcsin\left (\frac{n_{r}\, \sin(\theta_{r})}{n_{i}} \right) \\ &= \arcsin \left(\frac{1.41\, \sin(90^{\circ})}{1.58}\right) \\ &\approx 63.2^{\circ}\end{aligned}[/tex].
A 0.530-kg cart moving at 0.572 m/s to the right collides elastically with a 0.25-kg cart initially at rest. The 0.25-kg cart then moves off rapidly and compresses a spring before the 0.530-kg cart can catch it again.
To solve this problem, we can use the conservation of momentum and the conservation of kinetic energy.First, let's find the velocity of the 0.530-kg cart after the collision. We can use the conservation of momentum:m1v1 + m2v2 = m1v1' + m2v2'where m1 and v1 are the mass and velocity of the 0.530-kg cart before the collision, m2 and v2 are the mass and velocity of the 0.25-kg cart before the collision, and v1' and v2' are the velocities of the carts after the collision.Plugging in the numbers, we get:(0.530 kg)(0.572 m/s) + (0.25 kg)(0 m/s) = (0.530 kg)v1' + (0.25 kg)v2'Solving for v1', we get:v1' = [(0.530 kg)(0.572 m/s) + (0.25 kg)(0 m/s)] / (0.530 kg + 0.25 kg) = 0.378 m/s to the rightSo the 0.530-kg cart moves off to the right at 0.378 m/s after the collision.Next, let's find the maximum compression of the spring. We can use the conservation of kinetic energy:(1/2)m2v2^2 = (1/2)kx^2where k is the spring constant and x is the maximum compression of the spring.We know the mass and velocity of the 0.25-kg cart before the collision (v2 = 0 m/s), so we can solve for k:k = 2(1/2)m2v2^2 / x^2 = m2v2^2 / x^2Plugging in the numbers, we get:k = (0.25 kg)(0 m/s)^2 / x^2 = 0This means that the spring constant is 0, which is not physically possible. Therefore, there must be an error in the problem statement or some missing information that would allow us to calculate the maximum compression of the spring.
HELP!!! You have two substances, both of which have the same boiling point (or attraction between their molecules).
The first substance is made from molecules that are small (just a few atoms bonded together), and the second substance is made from mol that are larger (many atoms bonded together).
How can it be possible for two such different molecules to yield substances with the same boiling point? Describe the kinds of intermolecu attractions that must be involved and any other properties of the molecules that could cause this result.
Despite having different molecular sizes, two substances can have the same boiling point due to the presence of intermolecular attractions that compensate for the difference in molecular weight.
What is the explanation for the above response?Despite having different molecular sizes, two substances can have the same boiling point due to the presence of intermolecular attractions that compensate for the difference in molecular weight.
These intermolecular attractions, such as London dispersion forces, dipole-dipole interactions, or hydrogen bonding, play a crucial role in determining a substance's boiling point. For example, the larger molecules may have more surface area for London dispersion forces to act upon, while smaller molecules may have more polar groups for dipole-dipole interactions or hydrogen bonding.
As a result, these different types of intermolecular forces can offset each other, leading to substances with different molecular sizes having the same boiling point.
Learn more about molecular weight at:
https://brainly.com/question/27988184
#SPJ1
Use the heating curve (Figure 1) to answer the question.
Temperature (°C)
200
150
100
50
0
-50
-100
-150
200 400 600 800 1000 1200
Energy (J)
What is the boiling point of the substance represented?
0
-100 °C
150 °C
-50 °C
50 °C
Answer:
Melting Point = -50 °C
Boiling Point = 50 °C
Explanation:
A heating curve displays a substance in its 3 states.
On the graph, each region where the slope is positive represents the substance as a solid, liquid, or gas.
When the slope is 0, this is the temperature point at which the substance's state of matter has changed (i.e., melting or boiling/vaporization point) – also known as a phase transition. Essentially, the 0 slope regions are where the substance is changing from one state of matter to the next.
(When the substance is being heated, it's absorbing energy, but when it reaches a phase transition point, the substance begins to consume energy to change its matter state. That's why the temperature doesn't go up while the substance's internal Energy increases.)
In (Figure 1), where 'x' is Energy (J) and 'y' is Temperature (°C):
Region A (0 J ≤ x ≤ 200 J):
The slope is positive, so the substance is in a constant matter state. Because it's the first sloped region, the substance is in its solid state from -100 °C to -50 °C.
Region B (200 J ≤ x 600 J):
The slope is 0, so the substance has reached a phase transition point. Because the previous region was when the substance was solid, that means that the temperature throughout Region B is the melting point at -50 °C.
Region C (600 J ≤ x ≤ 800 J):
The slope is positive so the substance is in a constant matter state. We've already identified when the substance was solid and when it melted, so now the substance is in its liquid state from -50 °C to 50 °C.
Region D (800 J ≤ x ≤ 900 J):
The slope is 0, and since the previous region was when the substance was a liquid, it's now reached its boiling point at 50 °C.
Region E (900 J ≤ x ≤ 1000 J):
The slope is positive, and we've previously identified all of the transition points and matter states except for one, so the substance is now in its gaseous state after reaching 100°C.
(Once a substance reaches its gaseous state, the Temperature/Energy ratio is constant.)
1.
Which of the following is not true concerning sound waves?
Sound requires a medium.
Sound waves are longitudinal waves.
MacBook Air
Sound requires a vibrating object.
Sound waves cause particles to vibrate perpendicular to
the direction of the wave.
Answer:
Sound waves cause particles to vibrate perpendicular to the direction of the wave.
convert 750W into kilowatts
Ans. 0.75
To convert watts into kilowatts we must divide it by 1000
so dividing 750W by 1000
we get,
750/1000 = 0.75
hence 750W in kilowatts equals to 0.75
Jeremiah is conducting an investigation about the water cycle. He is given the following materials:
a lamp
a glass jar that contains water
plastic wrap
Describe how Jeremiah can arrange these materials to create a model that shows the processes by which water is cycled from a lake into the atmosphere and back to the lake. Be sure to identify what each material represents in the model.
Answer:
The water cycle outlines the continuous water movement in liquid, solid and gaseous state between locations on the Earth's surface.
The glass jar represents the lake while the atmosphere is represented by the space above the water, and the sky is represented by the (clear) plastic wrap
Arrangement description and Processes;
The processes of the water cycle includes;
Evaporation;
Condensation
Precipitation
Sublimation
Runoff
Infiltration
The arrangement of the materials is as follows;
Place the glass jar (the lake) containing water and the lamp (the Sun) side by side, such that the lamp light shines on the water surface
Cover the glass jar by wrapping the plastic wrap (the sky) around it to prevent the escape of water vapor when the water is hot.
Switch on the lamp so that it heats the water by radiation heat transfer
Observed processes;
The processes demonstrated by the above experiment includes;
1) Evaporation: As the water in the glass jar becomes warmer, the level of the water in the jar can be observed to decrease slightly due to evaporation
2) Condensation: Fog formation, Clouds
When hotter, the water surface as seen through the clear plastic wrap becomes less clearer due to evaporation, and condensation of the vapor while floating above the water surface, similar to the clouds seen in the sky.
3. Precipitation: Rain;
The clear plastic wrap covering the top of the glass jar, prevents the movement of the vapor further away, such that the tiny condensed vapor gather together, to form big droplets under the plastic wrap that falls back into the jar, which is similar to the process of rainfall
The above processes are repeated as more water evaporates from the jar condenses on the plastic wrap and falls back into the jar, showing the process by which water is recycled from the lake into the atmosphere and back to the lake.
Explanation:
What is the S-P difference (sec)?
What is the amplitude (mm)?
What is the distance (km)?
What is the magnitude (M)?
Amplitude is the maximum vertical displacement of the seismic waves on the Seismogram. As evident from the graph, it is 60 mm.
What is the Time?1. Time at which P waves arrive- 0 sec
Time at which S waves arrive- 18 sec
S-P interval= Time at which S wave arrive- Time at which P wave arrive
S-P interval= 18-0= 18 sec
2. Amplitude is the maximum vertical displacement of the seismic waves on the Seismogram. As evident from the graph, it is 60 mm.
3. The distance is around 150 km and is evident on the Distance/S-P bar chart.
4. The magnitude is about 4 and can be found by joining S-P interval (18 sec) with the Amplitude i.e., 6 mm. The point of intersection of the line to the magnitude line gives the magnitude, i.e., 4.
Read miore about amplitude here:
https://brainly.com/question/3613222
#SPJ1
13. If the supply of gasoline rises, name a substitute that will increase in demand? 14. How do you think each of the following affected the world price of oil? List if it will effect supply or demand, and the price change if any. Use basic supply and demand analysis. a. Tax credits were offered for expenditures on home insulation. b. The Alaskan oil pipeline was completed. c. Oil was discovered in Mexico and the North Sea. d. Sport Utility Vehicles and minivans became popular. e. Natural oil reserves became depleted
13. If the supply of gasoline rises, a substitute that may increase in demand could be electric or hybrid vehicles.
14. Here is how each of the following events may have affected the world price of oil using basic supply and demand analysis:
a. Tax credits offered for expenditures on home insulation would likely decrease the demand for oil as people would use less energy to heat their homes. This would lead to a decrease in the price of oil.
b. The completion of the Alaskan oil pipeline would increase the supply of oil, leading to a decrease in the price of oil.
c. The discovery of oil in Mexico and the North Sea would increase the supply of oil, leading to a decrease in the price of oil.
d. The popularity of Sport Utility Vehicles and minivans would increase the demand for oil as these vehicles typically consume more gasoline than smaller cars. This would lead to an increase in the price of oil.
e. The depletion of natural oil reserves would decrease the supply of oil, leading to an increase in the price of oil.
Why did Izzy fall when playing tug of war? Responses he tripped he tripped balanced forces balanced forces he was pushed he was pushed unbalanced forces
Answer:
he tripped ballanced forces ballanced forces
[Rotational motion] Calculate the length L between the 40N weight and the pivot needed to balance the beam shown in Figure 10.9. (solution says it's 7 m but it's unclear how it was obtained)
Answer:
L = 7m
Explanation:
The beam is balanced (not moving), so the moments about the pivot have to sum to 0.
Let x = dist. from pivot to the 10N ↓ force
CCW rotation is +
CW rotation is -
(100 N)(3 m) - (10 N)(x) - (40 N)(L) = 0
300 N·m - (10 N)(x) - (40 N)(L) = 0 divide by 10 on both sides
30 - x - 4L = 0
x + 4L = 30
10N is the Weight of the beam, so it is at the midpoint of the beam.
x = 5 - 3 = 2 m substitute into the equation above:
2 + 4L = 30
4L = 30 - 2 = 28
L = 28/4 = 7 m
what is the net charge when you rub a plastic ruler with fur
The net charge when you rub a plastic ruler with fur would be infinitesimal or zero
How to detect the net chargeThe effect of friction between a plastic ruler and fur is evident when electrons are transferred from the hairy surface to the ruler's plane, ending with the ruler possessing a negative charge while the fur taking on a positive one.
As a result, the whole system presents with a net charge that is negative it converges due to the excess electrons now found on the ruler. However, occasionally, the magnitude of this charge is very small, consequently making it difficult to probe without reliable technology or instruments.
Learn more about net charge at
https://brainly.com/question/31141504
#SPJ1
Researchers want to assess your intelligence. To do so, they have you
complete a short survey on which you indicate your favorite color. They ask
you to complete this survey multiple times, and you always answer the same
color. Unfortunately, one's favorite color has nothing to do with one's
intelligence. This research survey is best defined as:
This research survey is an example of a flawed or invalid measure of intelligence.
The research survey that is shown in this question can be defined as a poor measurement tool for assessing intelligence. One can easily identify that the researchers are measuring intelligence by asking about the favorite color of the personnel, which has nothing to do with the intelligence of the person. This survey lack validity which is essential to measure the intelligence of any personnel through a survey.
The survey also lacks reliability as it can't provide consistent results. If the intelligence of any personnel is somehow related to the intelligence of the person, answering the survey multiple times must give the same answer. This doesn't provide consistent result and lack reliability and realism.
Learn more about reliability at:
https://brainly.com/question/26251731
#SPJ1
If you have a potential energy of 57 J. Now double your height, what is your new potential energy?
The new potential energy you will have, given that your height is doubled is 114 J
How do i determine the new potential energy?The following data were obtained from the question:
Initial potential energy (PE₁) = 57 JInitial height (h₁) = HNew height (h₂) = double of initial height = 2HNew potential energy (PE₂) =?The new potential energy can be obtained as illustrated below:
PE₁ / h₁ = PE₂ / h₂
57 / H = PE₂ / 2H
Cross multiply
57 × 2H = PE₂ × H
Divide both sides by H
PE₂ = (57 × 2H) / H
PE₂ = 57 × 2
PE₂ = 114 J
Thus, from the above calculation, we can conclude that the new potential energy is 114 J
Learn more about potential energy:
https://brainly.com/question/22274239
#SPJ1
What is inertia of motion explain one example?
THE INABILITY OF A BODY TO CHANGE ITS STATE OF MOTION BY ITSELF
example : a passenger tends to fall forward when breaks are applied in a busThe tendency of an item to resist a change in its state of motion is referred to as inertia. It specifically refers to an object's resistance to any change in velocity, whether that change be in speed or direction.
What is Inertia ?When you are riding in a car and the driver abruptly stops, you are experiencing inertia of motion. Because of inertia, your body wants to continue going forward at the same pace and in the same direction as before the brakes were applied. You will lean forward as a result, and if you are not wearing a seatbelt, you may be flung forward. Similarly, while the automobile speeds, your body tries to remain at rest owing to inertia, causing you to be motionless. Despite being widely accepted, Aristotle's theory of motion was challenged by prominent philosophers multiple times over the course of roughly two thousand years. For instance, Lucretius claimed that mobility rather than stasis (stagnation) was the "default state" of the matter (following, presumably, Epicurus).
To know more about Inertia :
https://brainly.com/question/3268780
#SPJ5.
1. Choose one from the following countries:
o United States
o United Kingdom
o Australia
o Nepal
o Russia
o Spain
o India
2. Then make research of some laws supporting sexuality and gender in your
chosen country.
uk
because they have a Sexuality law
A flashlight bulb is connected to a dry cell of voltage 5.25 V. It draws 15 mA (1,000 mA = 1 A). Its resistance is
2.5 E2 ohms
3.0 E2 ohms
3.5 E2 ohms
4.0 E2 ohms
____________________________________
C) 3.5 ΩOhm's Law: R = V / I × 10= 5.25 ÷ 15mAh × 10= 3.5 Ω____________________________________
b) A motorcycle moving at 75 mph starts to slow down at a constant rate of 0.25 m/s^2 for 15 seconds. Find its final velocity (in both m/s and mph) and the total distance (in meters) that it traveled during this 15 s timeframe.
The final velocity of the motorcycle is
29.78 m/s (66.7083 mph),the total distance traveled during the 15-second timeframe is
516.98 meters.How to find the final velocityConvert the initial velocity from mph to m/s:
75 mph = 75 x 0.44704 m/s = 33.528 m/s
Using vf = vi + at
where
vf is the final velocity,
vi is the initial velocity
a is the acceleration, and
t is the time interval.
Plugging in the given values, we get:
vf = 33.528 m/s - (0.25 m/s^2)(15 s) = 32.59 m/s
convert the final velocity back to mph
32.59 m/s = 32.59 x 2.237 mph/m = 72.9 mph
distance traveled, d
d = vi*t + (1/2)at^2
d = 32.59 m/s * 15 s + (1/2)(-0.25 m/s^2)(15 s)^2
d = 516.98 m
Learn more about final velocity at
https://brainly.com/question/25905661
#SPJ1
The second law of thermodynamics states that
a change in a system's energy is equal to the energy
transferred to the system.
energy cannot be created or destroyed.
energy can flow from a colder object to a warmer object
only if something does work.
the only way to reduce an object's temperature is to
increase the entropy of the environment.
Answer: energy can flow from a colder object to a warmer object
only if something does work.
Explanation: Consider the flow of water from a higher level to a lower level. There is no need to use energy to make this process occur. This type of process which does not need the application of energy to take place is said to be spontaneous. But to make water go up to the water tank, a pump must be used to make the process take place. This type of process which needs the use of energy to make it happen is said to be nonspontaneous.
but why not the only way to reduce an object's temperature is to
increase the entropy of the environment.?
coz the motion of particles decreases and their velocity decreases so they have less entropy at a lower temperature.
hope it helped:)
A boy of mass 60 kg and a girl of mass 40 kg are together and at rest on a frozen pond and push each other apart. The girl moves in a negative direction with a speed of 3 m/s. What must be the final momentum of the boy?
A. 100 kgm/s
B. 120 kgm/s
C. -120 kgm/s
D. 40 kgm/s
Answer:
B. 120 kgm/s
Explanation:
The initial momentum of the system is zero since the boy and the girl are at rest. When they push each other apart, the total momentum of the system remains conserved. Since the girl moves in a negative direction, the boy must move in the positive direction with the same momentum to keep the total momentum of the system zero.
Let's assume the final momentum of the boy is p. According to the law of conservation of momentum,
(initial momentum) = (final momentum)
0 = p + (-40 kg)(-3 m/s)
0 = p + 120 kg m/s
p = -120 kg m/s
Therefore, the final momentum of the boy must be 120 kg m/s in the positive direction, which is answer choice B.
Ans
According to the law of conservation of momentum, the total momentum of the system before and after the interaction must be equal. Initially, the momentum of the system is zero since the boy and the girl are at rest. When they push each other, the girl moves in the negative direction with a speed of 3 m/s. Let's assume that the boy moves in the positive direction with a speed of v m/s.
The total initial momentum of the system is:
P_initial = m_boy * 0 + m_girl * 0 = 0
The total final momentum of the system must also be zero since there are no external forces acting on the system. Therefore:
P_final = m_boy * v + m_girl * (-3) = 0
where m_boy = 60 kg, m_girl = 40 kg, and v is the final speed of the boy in m/s.
Solving for v, we get:
60v - 120 = 0
v = 2 m/s
Therefore, the total final momentum of the boy must be:
P_final = m_boy * v = 60 kg * 2 m/s = 120 kg m/s.
So, the total final momentum of the boy must be 120 kg m/s.
What is the magnitude of the force in coulomb's law when one of the charge is double
Answer: Doubled
Explanation:
What type of circuit is shown
=When three resistors are connected in parallel, they form a parallel circuit. In a parallel circuit, each resistor is connected across the same two points, with the current split between the resistors.
In this configuration, the voltage across each resistor is the same, but the current through each resistor can be different. The total resistance of the circuit is calculated using the equation:
1/R_total = 1/R1 + 1/R2 + 1/R3
where R1, R2, and R3 are the resistance values of the individual resistors.
The total current in the circuit is equal to the sum of the currents through each resistor:
I_total = I1 + I2 + I3
where I1, I2, and I3 are the currents through each resistor.
The total power dissipated in the circuit can be calculated using the equation:
P_total = V² / R_total
where V is the voltage across the resistors.
In summary, when three resistors are connected in parallel, they form a parallel circuit, with each resistor connected across the same two points, and the current split between them. The total resistance, current, and power dissipated in the circuit can be calculated using the equations provided.
To know more about parallel circuit, visit:
https://brainly.com/question/11409042
#SPJ1
