A CD has a line density of 5000 lines/cm. A monochromatic light source hits the CD to form a third order image that diffracts at 45 degrees. Calculate the wavelength of the light. O a. A = 1.18 x 10³ m O b. A=4.71 x 107 m O c. A = 4.71 x 10-5 m Od. A 3.00 x 10-³ m

Answers

Answer 1

The correct answer for the wavelength of light is Option (a) A = 1.18 x 10³ m. By using the formula for diffraction grating and converting the angle to radians, we can calculate the wavelength of the light.

To calculate the wavelength of the light, we can use the formula for diffraction grating:

m * λ = d * sin(θ)

Where:

m is the order of the diffraction (in this case, m = 3 for the third order image),

λ is the wavelength of the light,

d is the line spacing or line density (in this case, d = 5000 lines/cm

= 5000 lines/0.01 m

= 500,000 lines/m), and

θ is the angle of diffraction (θ = 45 degrees).

Rearranging the formula, we have:

λ = (d * sin(θ)) / m

Plugging in the values:

λ = (500,000 lines/m * sin(45 degrees)) / 3

First, let's convert the angle from degrees to radians:

θ = 45 degrees * (π / 180 degrees)

= π/4 radians

Now we can calculate the wavelength:

λ = (500,000 lines/m * sin(π/4 radians)) / 3

≈ (500,000 * 0.707) / 3

≈ 117,675 m

Therefore, the wavelength of the light is approximately 117,675 meters.

The correct answer is:

a. A = 1.18 x 10³ m

To know more about Wavelength, visit

brainly.com/question/10750459

#SPJ11


Related Questions

A flow is described by velocity field V - ai + bxj where a -2 m/s and b-1 s'. Coordinates are measured in meters. a) Obtain the equation for the streamline passing through point (2, 5) b) At -2 s, what are the coordinates of the particle that passed through point (0, 4) at -0?

Answers

a) The equation for the streamline passing through point (2, 5) is y = -2x + 15. To obtain this equation, we need to find the values of 'a' and 'b' in the given velocity field equation.

From the equation V = -ai + bxj, we know that the x-component of velocity is -a and the y-component is b.

Given a = -2 m/s, we have the x-component of velocity as 2 m/s. Integrating the x-component, we find that dx/dt = 2, which gives x = 2t + C1.

Next, we consider the y-component. Given b = -1 s', the y-component of velocity is -t. Integrating the y-component, we find that dy/dt = -t, which gives y = -0.5t^2 + C2.

Using the coordinates (2, 5) for t = 0, we can solve for C1 and C2, which gives us x = 2t + 2 and y = -0.5t^2 + 5. Simplifying, we obtain the streamline equation y = -2x + 15.

b) At t = -2 s, the coordinates of the particle that passed through point (0, 4) at t = 0 are (-4, 0).

To find the coordinates, we use the x-component equation x = 2t + 2 and the y-component equation y = -0.5t^2 + 5. Plugging in t = -2, we get x = -2 and y = 9. Therefore, the particle that passed through (0, 4) at t = 0 will have coordinates (-2, 9) at t = -2.

To know more about velocity, click here:

https://brainly.com/question/14805590

#SPJ11

A 1500 kg car skids to a halt on a wet road where Mk = 0.46.
How fast was the car traveling if it leaves 60-m-long skid marks?

Answers

The car was traveling approximately 33.1 m/s when it skidded to a halt on the wet road.

Work done by friction force:W = Fd

Equating KE and W:0.5mv² = Fd

Equating F to μk N:

F = μk N

Equating N to mg:N = mg

Putting the values in the above equation we get:F = μkmg

Initial velocity refers to the velocity in the beginning when the object starts moving. When the time is equal to 0 seconds the velocity is called initial velocity. To denote initial velocity, we use the symbol ‘u’.

Substituting this value in equation 4 we get:0.5mv² = μkmgd

Solving this equation for the initial velocity (v) we get:v = √(2μk g d)

Putting the values in this formula we get:

v = √(2 x 0.46 x 9.81 x 60)≈ 33.1 m/s

Different factors impact initial velocity like distance, speed, displacement, etc. Therefore we calculate the rate of change in the position of a person with respect to time by using different factors.

Learn more about work done at:

https://brainly.com/question/32236321

#SPJ11

The car was traveling at a speed of 24.5 m/s when it started skidding.

Given,

Mass of car, m = 1500 kg

Coefficient of friction, Mk = 0.46

Length of skid marks, s = 60 m

Using the kinematic equation,v² = u² + 2aswhere

,v = final velocity = 0 (because the car skids to a halt)

u = initial velocity

a = acceleration

Using Newton's second law of motion,

F = ma

The frictional force, F = MkN

where N is the normal force exerted by the road on the carIn this case, the normal force, N = mg

where g is the acceleration due to gravity (9.8 m/s²)

Therefore

,F = Mkmg = 0.46 x 1500 kg x 9.8 m/s² = 6762 N

Now, using the kinematic equation,s = (u² - v²) / 2a=> 60 m = (u² - 0) / (2 x (F/m))=> u² = 2 x F x s / m=> u = √(2 x 6762 N x 60 m / 1500 kg)≈ 24.5 m/s

Learn more about Newton's second law of motion: https://brainly.com/question/27712854

#SPJ11

Please solve the problem with clear steps in one hour.
Thanks
ulate the absolute magnitude of the Sun.
ulate the absolute magnitude of the Sun.

Answers

The absolute magnitude of the Sun is approximately -0.17.

To calculate the absolute magnitude of the Sun, we need to understand the concept of absolute magnitude and gather the necessary data.

Absolute magnitude (M) is a measure of the intrinsic brightness of a celestial object, specifically how bright it would appear if it were located at a standard distance of 10 parsecs (about 32.6 light-years) from the observer.

The absolute magnitude is calculated using the formula:

M = m - 5(log10(d) - 1)

Where:

m is the apparent magnitude of the Sun

d is the distance from the Sun to the observer in parsecs

The apparent magnitude of the Sun is approximately -26.74. However, we need the distance to the Sun in parsecs to calculate the absolute magnitude.

The average distance from the Earth to the Sun, known as an astronomical unit (AU), is about 1.496 x 10^8 kilometers or 4.848 x 10^-6 parsecs.

Using this distance, we can calculate the absolute magnitude of the Sun:

M = -26.74 - 5(log10(4.848 x 10^-6) - 1)

M = -26.74 - 5(-5.314)

M = -26.74 + 26.57

M ≈ -0.17

Therefore, the absolute magnitude of the Sun is approximately -0.17.

To know more about  magnitude, visit

https://brainly.com/question/30337362

#SPJ11

The magnetic field at the center of a 0.500-cm-diameter loop is 2.30mT .

What is the current in the loop?

A long straight wire carries the same current you found in part a. At what distance from the wire is the magnetic field 2.30mT ?

Answers

According to the question we have Thus, the distance of the magnetic field from the wire is 3.98 × 10^-4 m.

To find the current in the loop, we can use the below formula; B=μ₀/4π×I/R where B is the magnetic field, I is the current, R is the radius of the loop, and μ₀ is the magnetic constant. Substituting the given values, we get; I=B×4πR/μ₀=2.30×10^-3×4π×0.250×10^-2/4π×10^-7=0.72A .

Hence, the current in the loop is 0.72 A.   Now, we need to find the distance of the magnetic field 2.30 mT from the wire.

To find the distance of the magnetic field from the wire, we can use the below formula; B=μ₀/4π×I/D where B is the magnetic field, I is the current, D is the distance, and μ₀ is the magnetic constant. Substituting the given values, we get;D=μ₀/4π×I/B=4π×10^-7×0.72/2.30×10^-3=3.98×10^-4 m .

Thus, the distance of the magnetic field from the wire is 3.98 × 10^-4 m .

To know more about Magnetic  visit :

https://brainly.com/question/3617233

#SPJ11

at its peak, a tornado is 49.0 m in diameter and carries 495-km/h winds. what is its angular velocity in revolutions per second?

Answers

The angular velocity of the tornado is approximately 0.8923 revolutions per second.

To calculate the angular velocity of the tornado, we need to first find its linear velocity and then convert it to angular velocity.The linear velocity can be calculated using the formula:
linear velocity = circumference / time

The circumference of the tornado can be found using the formula: circumference = π * diameter
Substituting the given diameter of 49.0 m, we get:
circumference = π * 49.0 m.

Next, we need to convert the speed of the tornado from km/h to m/s. We can do this by multiplying the given speed by (1000 m / 1 km) and then dividing by 3600 s to convert from hours to seconds:
linear velocity = (495 km/h) * (1000 m / 1 km) / (3600 s)
Now we have both the circumference and the linear velocity. To find the angular velocity, we use the formula:
angular velocity = linear velocity / radius
Since the diameter is given, we need to divide it by 2 to find the radius:radius = diameter / 2
Substituting the values, we have:
angular velocity = (linear velocity) / (diameter / 2)
Calculating the angular velocity:
angular velocity = [(495 km/h) * (1000 m / 1 km) / (3600 s)] / (49.0 m / 2)
Simplifying the expression, we find:
angular velocity = [(495 * 1000) / (3600)] / (49.0 / 2)
angular velocity = (137.5 m/s) / (49.0 / 2)

angular velocity = (137.5 m/s) / 24.5
angular velocity = 5.6122 radians/s.

To convert the angular velocity to revolutions per second, we need to divide the angular velocity by 2π (the number of radians in one revolution):
angular velocity in revolutions per second = (5.6122 radians/s) / (2π)
angular velocity in revolutions per second ≈ 0.8923 revolutions/s.

Therefore, the angular velocity of the tornado is approximately 0.8923 revolutions per second.

To learn more about angular velocity:

https://brainly.com/question/30237820

#SPJ11

A 5.0 [kg] ball is kicked with an initial velocity of 3.0 [m/s] and lands at some height. Ignoring air resistance, what is the height difference between the launch point and the landing point if the velocity of the ball right before it lands is 5.0 [m/s]? 0.82 [m] -0.82 [m] 1.63 [m] -1.63 [m]

Answers

The height difference between the launch point and the landing point is 1.63 [m]. The initial velocity of the 5.0 [kg] ball is 3.0 [m/s]. The velocity of the ball right before it lands is 5.0 [m/s].

The time taken by the ball to hit the ground is:$$t = \frac{v_f-v_i}{g}$$$$\text{Here}, v_i = 3.0\; [m/s],\;\text{and}\; v_f = 5.0 \;[m/s]$$$$t = \frac{5.0\;[m/s]-3.0\;[m/s]}{9.8\;[m/s^2]} = 0.2041\;[s]$$The maximum height reached by the ball is given by$$\Delta y = v_{i,y}t + \frac{1}{2}a_yt^2$$The velocity of the ball at the highest point of its trajectory is zero, so $v_f$ in the above equation is zero. This means we have:$$0 = v_{i,y} - g\Delta t$$$$\text{where } v_{i,y} = 3.0\;[m/s]$$$$\text{Therefore,}\; \Delta y = \frac{1}{2}gt^2 = 0.2011\;[m]$$Finally, the height difference between the launch point and the landing point is$$\text{Height difference} = 2\Delta y = 2 \times 0.2011\;[m] = 1.63\;[m]$$Hence, the height difference between the launch point and the landing point is 1.63 [m].

Know more about launch and landing point, here:

https://brainly.com/question/27994436

#SPJ11

A 5.0-m-wide swimming pool is filled to the top. The bottom of the pool becomes completely shaded in the afternoon when the sun is 23Â degrees above the horizon. How deep is the pool? (in meters)

Answers

the depth of the pool is 3.08 meters.

Given:

Width of the swimming pool = 5.0 mThe pool is filled to the top.

The bottom of the pool becomes completely shaded in the afternoon when the sun is 23° above the horizon

We can solve the given question using Trigonometry.

ABC,cot 23° = AB/BCEquation (1)

But, AB + BC = 5.0 m

Equation (2)Also, AB^2 + BC^2 = AC^2

[Applying Pythagoras theorem in triangle ABC]  Equation (3)

From equation (2), we have BC = 5 - AB

Substituting it in equation (3),

we get:

AB^2 + (5 - AB)^2 = AC^2

Expanding and simplifying the above equation:

2AB^2 - 10AB + 25 = AC^2But, we know that AB/BC

Equation (1) => AB = BC × cot 23° => AB = (5 - AB) × cot 23°

Solving the above equation, we get AB = 1.92 m

Hence, the depth of the pool is BC = 5 - AB = 5 - 1.92 = 3.08 meters.

So, the depth of the pool is 3.08 meters.

learn more about Trigonometry here

https://brainly.com/question/24349828

#SPJ11

wo asteroids are flying through space towards one another.Comet A has a mass of 147kg and is moving at 80m/s [R]. Comet B is moving at 29m/s [L] and has a mass of 147kg. a. Calculate the total kinetic energy and momentum of the system just before the two asteroids collide.4 Marks,C:1 b. The two asteroids collide head-on in a perfectly elastic collision.Show the steps that you would follow in order to calculate/determine the velocity of each(3 Marks,C:1

Answers

(a) The total kinetic energy and momentum of the system before collision is 532,213.5 J and 16,023 kgm/s respectively.

(b) The final velocity of Comet A after the collision is 0 m/s and the final velocity of Comet B is 51 m/s.

What is the total momentum and kinetic energy of the asteroids?

(a) The total kinetic energy and momentum of the system just before the two asteroids collide is calculated by applying the following formula.

Momentum of the system;

P = (147 kg x 80 m/s) + ( 147 kg x 29 m/s)

P = 16,023 kgm/s

Kinetic energy of the system;

K.E = ¹/₂ x 147 x 80²   +  ¹/₂ x 147 x 29²

K.E = 532,213.5 J

(b) The velocity of the each asteroid after the perfectly elastic collision is calculated by applying the principle of conservation of linear momentum as follows;

m₁u₁ + m₂u₂ = m₁v₁  +  m₂v₂

where;

m₁ is the mass of Comet Am₂ is the mass of Comet Bu₁ is the initial velocity of Comet Au₂ is the initial velocity of Comet Bv₁ is the final velocity of Comet Av₂ is the final velocity of Comet B

147 x 80  -   147 x 29 =  147v₁  +  147v₂

7497 = 147(v₁  +  v₂)

v₁  +  v₂ = 7497 / 147

v₁  +  v₂ = 51 --------  (1)

Since the collision of the system occurred in one direction, our second equation is;

u₁ + v₁ = u₂ + v₂

80 + v₁ = 29 + v₂

v₁ = v₂ - 51 --------- (2)

Substitute (2) into (1);

v₁  +  v₂ = 51

v₂ - 51  + v₂ = 51

2v₂ = 51 + 51

2v₂ = 102

v₂ = 102/2

v₂ = 51 m/s

The value of v₁ becomes;

v₁ = v₂ - 51

v₁ = 51 - 51

v₁ = 0 m/s

Thus, the final velocity of Comet A is 0 m/s and the final velocity of Comet B is 51 m/s.

Learn more about conservation of linear momentum here: https://brainly.com/question/7538238

#SPJ4

why did the quantum-mechanical model of the atom become necessary?

Answers

In the late 19th century, studies of spectral lines and certain other phenomena were conducted, which helped in the development of quantum mechanics. The Bohr Model of the atom was the first atomic model to describe the atom's internal structure. It became clear, however, that the Bohr model was only successful for atoms with one electron, such as hydrogen. Atoms with more than one electron were more difficult to explain with this model.

Therefore, it became necessary to come up with a new model of the atom that could explain atoms with more than one electron. The quantum-mechanical model of the atom became necessary to overcome the limitations of the classical physics. According to classical mechanics, electrons should release electromagnetic radiation as they move in their orbits, which causes their orbit to collapse and the electrons to spiral into the nucleus. This theory was unable to explain the stability of atoms with more than one electron. As a result, the quantum-mechanical model of the atom was developed to overcome this limitation. The quantum-mechanical model is a model of the atom that combines quantum mechanics with classical mechanics.

In the quantum-mechanical model of the atom, electrons are not assumed to move in specific orbits. Rather, they move in orbitals, which are regions of probability where electrons are likely to be found. The quantum-mechanical model is a more accurate representation of the behavior of electrons in atoms. This is because it takes into account the wave-like properties of electrons, which classical mechanics does not. The quantum-mechanical model of the atom is essential for our understanding of chemical bonding. Chemical bonding is the process by which atoms combine to form molecules. The properties of a molecule depend on the arrangement of its atoms and the arrangement of electrons around the atoms.

The quantum-mechanical model allows us to predict the arrangement of electrons in molecules, which is essential for understanding chemical bonding. In conclusion, the quantum-mechanical model of the atom became necessary because the classical mechanics were unable to explain the behavior of electrons in atoms with more than one electron. The quantum-mechanical model is more accurate than the classical mechanics and has become essential to our understanding of chemical bonding.

To know more about Bohr Model visit

https://brainly.com/question/3964366

#SPJ11

A 50 g ball containing 359239500 excess electrons is dropped into a 129 m vertical shaft and enters a uniform horizontal magnetic field of 0.288 T (from east to west). Ignoring air resistance, find the magnitude of the force that this magnetic field exerts on the ball. Leave your answer in 12 decimal places (e.g. 1.23e-10)

Answers

The magnetic field exerts a force of approximately 2.329575347200e-17 N on the 50 g ball containing 359239500 excess electrons as it enters the uniform horizontal magnetic field of 0.288 T.

To find the magnitude of the force that the magnetic field exerts on the ball, we can use the equation for the magnetic force on a charged particle moving in a magnetic field:

F = q * v * B * sinθ

where:

F is the magnitude of the force,

q is the charge of the particle,

v is the velocity of the particle,

B is the magnetic field strength, and

theta is the angle between the velocity vector and the magnetic field vector.

In this case, the ball contains excess electrons, which have a negative charge. The charge of an electron is approximately -1.602 × 10⁻²Coulombs.

The velocity of the ball can be calculated using the equations of motion. Since the ball is dropped into the vertical shaft and assuming it falls freely under the influence of gravity, its velocity can be determined using the equation:

[tex]V = \sqrt{2*g*h}[/tex]

where:

g is the acceleration due to gravity (approximately 9.8 m/s²) and

h is the height of the vertical shaft (129 m in this case).

Plugging in the values, we have:

v = sqrt(2 * 9.8 * 129)

v ≈ 49.665 m/s

The angle theta between the velocity vector and the magnetic field vector is 90 degrees because the ball is dropped vertically and the magnetic field is horizontal. Therefore, sin(theta) = 1.

Now we can calculate the magnitude of the force:

F = (1.602 × 10⁻⁹ C) * (49.665 m/s) * (0.288 T) * (1)

F ≈ 2.3295753472e-17 N

Rounding to 12 decimal places, the magnitude of the force that the magnetic field exerts on the ball is approximately 2.329575347200e-17 N.

In conclusion, the magnetic field exerts a force of approximately 2.329575347200e-17 N on the 50 g ball containing 359239500 excess electrons as it enters the uniform horizontal magnetic field of 0.288 T.

To know more about force visit:

https://brainly.com/question/28843259

#SPJ11

how would the gravitational force at the surface of star michael change if star michael contracted to one-sixth of its previous diameter, without losing any of its mass

Answers

The gravitational force at the surface of Star Michael will increase if the star contracts to one-sixth of its previous diameter without losing any of its mass.

According to Newton’s law of gravitation, the gravitational force between two objects is inversely proportional to the square of the distance between their centers and proportional to the product of their masses. This means that as the distance between two objects decreases, the gravitational force between them increases and vice versa.

Since the mass of Star Michael remains constant, the force of gravity will increase significantly due to the decrease in the distance between the objects. This is because the gravitational force decreases with the square of the distance between two objects.

As the radius of Star Michael decreases to one-sixth of its previous size, its surface gravity will increase by a factor of 36 (6^2).This means that the surface gravity will be about 36 times stronger than it was before the contraction.

Therefore, if Star Michael contracted to one-sixth of its previous diameter without losing any of its mass, the gravitational force at its surface would be more significant, and it would be much harder for an object to escape its gravitational pull.

To know more about Force  visit :

https://brainly.com/question/30507236

#SPJ11

Question 13 A wheel rotates through an angle 200 rad in 4.50 s , at which time its angular velocity reaches 102 rad/s. Constants Part A Calculate the angular velocity at the start of this 200 rad rota

Answers

The angular velocity at the start of the 200 rad rotation is approximately 57.56 rad/s. It is calculated using the equation ω₀ = (Δθ - ω * Δt) / (-Δt).

To calculate the angular velocity at the start of the 200 rad rotation, we can use the equation:

Angular velocity (ω) = Change in angle (Δθ) / Time taken (Δt)

Given that the wheel rotates through an angle of 200 rad in 4.50 s and its angular velocity reaches 102 rad/s at that time, we have:

Δθ = 200 rad

Δt = 4.50 s

ω = 102 rad/s

Let's assume the angular velocity at the start of the rotation is ω₀.

Using the equation above, we can rearrange it to solve for ω₀:

ω₀ = (Δθ - ω * Δt) / (-Δt)

Substituting the given values, we get:

ω₀ = (200 rad - 102 rad/s * 4.50 s) / (-4.50 s)

   = (200 rad - 459 rad) / (-4.50 s)

   = -259 rad / (-4.50 s)

   ≈ 57.56 rad/s

Therefore, the angular velocity at the start of the 200 rad rotation is approximately 57.56 rad/s.

To know more about angular velocity refer here:

https://brainly.com/question/2959732#

#SPJ11

besides u-235, another isotope that can undergo nuclear fission is

Answers

Besides U-235, another isotope that can undergo nuclear fission is Pu-239. U-235 and Pu-239 are the two isotopes that can sustain a chain reaction, which is necessary for nuclear power generation or nuclear weapons.

Nuclear fission is the process of splitting the nucleus of an atom into smaller fragments, releasing energy in the process.  The splitting of a uranium-235 or plutonium-239 nucleus releases a tremendous amount of energy. This energy is used to generate electricity in nuclear power plants and to propel nuclear submarines and aircraft carriers. Nuclear fission is also used in nuclear weapons, where the energy release is used to cause an explosion. Besides U-235 and Pu-239, other isotopes can undergo nuclear fission but are not suitable for nuclear power generation or weapons development because they either do not release enough energy or are too difficult to produce.

to know more about nuclear fission visit:

https://brainly.com/question/913303

#SPJ11

A beam segment is subjected to the internal bending moments shown. Sketch a side view of the beam segment, and plot the distribution of bending stresses acting at sections A and B. Indicate the magnitude of the key bending stresses in the sketch. Determine the resultant forces acting in the x direction on area (3) at sections A and B, and show these resultant forces in the sketch. Is the specified area in equilibrium with respect to forces acting in the x direction? If not, determine the horizontal force required to satisfy equilibrium for the specified area and show the location and direction of this force in the sketch. 12 in. 10 in. (1) 0.6 in. X 13 in. 0.4 in. -100 kip-in A (2) -350 kip-in B (3) 0.6 in 7 in.

Answers

The resultant force acting in the x-direction on area (3) is 2925 lb. The horizontal force required to satisfy equilibrium is 4625 lb and it acts to the left side of the beam segment.

The sketch of the side view of the beam segment is shown below; Distribution of bending stresses acting at sections A and B:

At section A,σ = Mc/I

= 100×12/(0.6×0.4³)

= 625 psi - tensile stress.

At section B,σ = Mc/I

= 350×10/(0.6×0.4³)

= 2187.5 psi - compressive stress.

The magnitude of key bending stresses in the sketch is indicated as follows:

Resultant forces acting in the x direction on area (3) at sections A and B: The resultant force acting in the x-direction on area (3) is obtained by taking the area under the curve of the internal bending moment diagram and is given as;

RA = area of the triangle AEF + area of the rectangle EFGD + area of the triangle GHBRA

= (1/2×12×100) + (10×100) + (1/2×7×200)RA = 1225 + 1000 + 700RA

= 2925 lb.

The resultant force at section B in the x-direction is;

RB = 1225 - 2925

= -1700 lb.

The specified area is not in equilibrium with respect to forces acting in the x-direction because the algebraic sum of the forces is not equal to zero.

Therefore, the horizontal force required to satisfy equilibrium is given as; FH = RB - RA

= -1700 - 2925

= -4625 lb.

The location and direction of this force is indicated in the sketch as shown below:

The horizontal force required to satisfy equilibrium is 4625 lb and it acts to the left side of the beam segment.

To know more about x-direction, visit:

https://brainly.com/question/32262214

#SPJ11

Q9: What is the principal cause of charged particle energy loss in semiconductors *before* ionization can occur? a) Charge quenching/bulk impurities b) Trapping/recombination c) A dead layer d) The io

Answers

The principal cause of charged particle energy loss in semiconductors before ionization can occur is trapping/recombination (option b).

In semiconductors, charged particles such as electrons or holes can lose energy through various mechanisms, and trapping and recombination are important processes that contribute to energy loss.

When a charged particle traverses a semiconductor material, it can encounter defects or impurities in the crystal lattice. These defects can act as trapping sites for the charges, temporarily capturing and holding them. This trapping process leads to a reduction in the kinetic energy of the charged particle as it loses energy to the lattice.

Additionally, recombination can occur in semiconductors when an electron and a hole, which are opposite charge carriers, combine and neutralize each other. Recombination events result in the dissipation of the kinetic energy of the charged particle.

Both trapping and recombination processes hinder the movement of the charges, reducing their energy and preventing them from causing ionization of atoms within the semiconductor material.

Trapping and recombination are the principal causes of charged particle energy loss in semiconductors before ionization can occur. These processes play a significant role in limiting the energy transfer of charged particles and affect the overall performance of semiconductor devices.

To know more about semiconductors, visit

https://brainly.com/question/26111083

#SPJ11

how do actual vapor power cycles differ from idealized ones?

Answers

Actual vapor power cycles differ from idealized ones in several ways. Here are a few key differences: irreversibilities and losses ,condenser and boiler heat transfer, working fluid properties and mechanical and operational limitations.

Irreversibilities and Losses: Idealized vapor power cycles assume reversible processes with no losses. In reality, there are various irreversibilities and losses such as friction, heat transfer losses, and pressure drops. These factors reduce the overall efficiency of the cycle.Condenser and Boiler Heat Transfer: Idealized cycles assume perfect heat transfer in the condenser and boiler, but in actual cycles, there are heat transfer losses due to temperature differences and imperfections in heat exchangers. These losses affect the efficiency and performance of the cycle.Working Fluid Properties: Idealized cycles assume working fluids that undergo ideal thermodynamic processes. However, real working fluids have non-ideal properties such as specific volume changes with pressure and temperature variations, which impact the cycle performance.Mechanical and Operational Limitations: Real-world power cycles have mechanical and operational limitations that can affect their performance. These include limitations in turbine and pump efficiencies, pressure and temperature constraints, and practical considerations in equipment design and operation.
Overall, actual vapor power cycles are influenced by various real-world factors and constraints that make them deviate from idealized cycles. Engineers consider these differences to optimize cycle designs and improve the efficiency and reliability of power systems.  

To know more about , friction, click here https://brainly.com/question/13000653

#SPJ11

How do we determine the total maximum distance of a bungee system knowing the length of the bungee
cord?

Answers

The total maximum distance of the bungee system is equal to two times the length of the bungee cord plus the height of the jumper above the ground.

To determine the total maximum distance of a bungee system, knowing the length of the bungee cord, you need to follow the following steps:

Determine the spring constant of the bungee cord. The spring constant of the bungee cord is a measure of the stiffness of the cord. It is usually measured in units of force per unit of length (N/m).

Calculate the gravitational potential energy of the jumper at the highest point. The gravitational potential energy is equal to the weight of the jumper multiplied by the height of the jumper above the ground (PE = mgh).

Calculate the spring potential energy of the bungee cord at the highest point. The spring potential energy is equal to one-half the spring constant multiplied by the square of the length of the bungee cord (PE = (1/2)kx²).

Set the gravitational potential energy equal to the spring potential energy and solve for x. This will give you the length of the bungee cord at the highest point (x).mgh = (1/2)kx²x = sqrt((2mgh)/k)

Determine the total maximum distance of the bungee system. The total maximum distance of the bungee system is equal to two times the length of the bungee cord plus the height of the jumper above the ground.

It is given as,Dmax = 2x + hJwhere x is the length of the bungee cord at the highest point, hJ is the height of the jumper above the ground, and Dmax is the total maximum distance of the bungee system.

Learn more about gravitational potential energy

brainly.com/question/3910603

#SPJ11

which power supply feature helps prevent circuit overloads by balancing the current flow

Answers

A power supply feature that helps prevent circuit overloads by balancing the current flow is the over-current protection (OCP) feature.

What is a power supply? A power supply is a device that transforms electrical energy from a source into electrical energy that can be used to power electronic devices. A power supply converts the power from a wall socket or other power source into a form that is compatible with the device it is powering. Power supplies come in a variety of shapes and sizes, from small wall adapters that power cell phones to large rack-mounted power supplies that power computer systems.

What is over-current protection (OCP)? When a power supply provides power to a device, it must deliver the correct amount of current. Too little current, and the device will not function correctly; too much current, and the device may be damaged or destroyed. Over-current protection (OCP) is a power supply feature that helps prevent circuit overloads by balancing the current flow. The over-current protection feature monitors the current flow in the circuit. If the current exceeds a certain threshold, the OCP feature will shut down the power supply to prevent damage to the device. OCP is an essential feature in power supplies that are used in critical applications such as medical equipment, industrial automation, and military applications. OCP is typically implemented using a current sense circuit that measures the current flowing through the circuit. The current sense circuit feeds this information back to the power supply controller, which then adjusts the current output to keep it within safe limits.

to know more about over-current protection visit:

https://brainly.com/question/29891100

#SPJ11

Water evaporates from a swimming pool at an approximately constant rate of 25 gallons of water for a pool with a surface area of 100 square feet to 90 gallons for a pool with a surface area of 400 square feet.
(a)
What is the evaporation rate per square foot of surface area (in gal/ft2)? Round to the nearest hundredth.
gal/ft2
How many gallons of water will evaporate from a pool of 200 square feet? Round to the nearest gallon.
gal

Answers

(a) The evaporation rate per square foot of surface area (in gal/ft2) is 0.22 gal/ft2 (rounded to the nearest hundredth). (b) The amount of water evaporated from a pool of 200 square feet is approximately 68 gallons (rounded to the nearest gallon).

(a) To find:

The evaporation rate per square foot of surface area (in gal/ft2)(b) How many gallons of water will evaporate from a 200-square-foot pool?

Solution: (a) Let's calculate the slope of the line, which gives the evaporation rate per square foot of surface area.

Slope = (change in y)/(change in x)

Slope = (90 - 25)/(400 - 100)

Slope = 65/300

Slope = 0.2167

The evaporation rate per square foot of surface area is 0.22 gal/ft2 (approx)(rounded to the nearest hundredth)

(b) Let x be the number of gallons of water evaporated from a pool of 200 square feet.

Then, using the point-slope form of a line:  

Slope = change in y / change in x

⇒ 0.2167 = (y - 25) / (100) y - 25

= 0.2167(200)

y = 25 + 43.34y

= 68.34

The amount of water evaporated from a pool of 200 square feet is approximately 68 gallons (rounded to the nearest gallon)

.Answer:

(a) The evaporation rate per square foot of surface area (in gal/ft2) is 0.22 gal/ft2 (rounded to the nearest hundredth).

(b) The amount of water evaporated from a pool of 200 square feet is approximately 68 gallons (rounded to the nearest gallon).

To know more about evaporation, visit:

https://brainly.com/question/28319650

#SPJ11

steps to the solution.
QUESTION 1 An automobile engine develops a torque of 286 Nm at 1600 RPM. What is the power of the engine?

Answers

An automobile engine develops a torque of 286 Nm at 1600 RPM: The power of the engine is approximately 62.96 kW.

Power (P) is the rate at which work is done or energy is transferred, and it can be calculated using the equation:

P = Torque × Angular velocity

The given torque is 286 Nm, and the angular velocity can be calculated by converting the RPM (revolutions per minute) to radians per second (rad/s). Since 1 revolution is equal to 2π radians, the conversion factor is:

Angular velocity = (2π × RPM) / 60

Substituting the given values into the equation:

Angular velocity = (2π × 1600 RPM) / 60 ≈ 167.55 rad/s

Now we can calculate the power:

P = 286 Nm × 167.55 rad/s ≈ 47862.3 Nm/s

To convert Nm/s to kilowatts (kW), divide by 1000:

Power = 47862.3 Nm/s / 1000 ≈ 62.96 kW

Therefore, the power of the engine is approximately 62.96 kW.

To know more about torque, refer here:

https://brainly.com/question/30337230#

#SPJ11

what is the electric field of the first two charges at the location of the third charge?

Answers

Let's denote the charges as Q1, Q2, and Q3, and their respective positions as r1, r2, and r3. The electric field E at the location of the third charge (Q3) is given by: E = E1 + E2

To calculate the electric field of the first two charges at the location of the third charge, we need to consider the principle of superposition. The electric field at a point due to multiple charges is the vector sum of the electric fields produced by each individual charge.

Let's denote the charges as Q1, Q2, and Q3, and their respective positions as r1, r2, and r3. The electric field E at the location of the third charge (Q3) is given by:

E = E1 + E2

where E1 is the electric field produced by Q1 at the location of Q3, and E2 is the electric field produced by Q2 at the location of Q3.

The electric field produced by a point charge is given by Coulomb's law:

E = k * Q / r^2

where k is the electrostatic constant, Q is the charge, and r is the distance between the charge and the point where the electric field is being calculated.

So, we can calculate E1 and E2 using the above formula, substituting the appropriate values for charges and distances.

Once we have calculated E1 and E2, we can add them vectorially to obtain the net electric field at the location of Q3.

To learn more about electric field click here

https://brainly.com/question/30544719

#SPJ11

how do the shape, path, and speed of ocean waves change when they move towards shallow water? 15px

Answers

When ocean waves move towards shallow water, several changes occur in their shape, path, and speed. These changes are primarily due to the interaction between the waves and the ocean floor.

Shape: As waves approach shallow water, their shape becomes more peaked and steeper. This is because the wave's energy becomes concentrated in a smaller area, causing the wave crest to become higher and the trough to become deeper. Path: The direction of wave propagation may change as waves move into shallow water. This phenomenon is known as wave refraction. Wave refraction occurs because the part of the wave in shallower water slows down more than the part in deeper water, causing the wave to bend and align more parallel to the shoreline. Speed: The speed of waves decreases as they enter shallow water. This reduction in speed is due to the frictional drag between the wave and the ocean floor. The decrease in speed also contributes to the increase in wave height and steepness.

To learn more about ocean:

https://brainly.com/question/12738467

#SPJ11

"A mirror with a 60.0 cm radius creates an image of an object that is upright and three times smaller. a. Without doing a calculation, determine where the mirror is concave or convex. b. Determine the location of the object and the location of the image. Is the image real or virtual?

Answers

The location of the object will be closer to the mirror compared to the image. The image formed by the concave mirror will be real and located farther away from the mirror than the object.

(a) Without performing any calculations, we can determine whether the mirror is concave or convex based on the characteristics of the image. In this case, the mirror creates an image that is upright and three times smaller. Concave mirrors are known to produce both upright and magnified or reduced images, depending on the position of the object. Convex mirrors, on the other hand, always produce virtual and reduced images. Since the image formed by the mirror is upright and three times smaller, we can conclude that the mirror is a concave mirror.

(b) To determine the location of the object and the image, we can use the mirror equation:

1/f = 1/d₀ + 1/dᵢ

where f is the focal length of the mirror, d₀ is the object distance (distance of the object from the mirror), and dᵢ is the image distance (distance of the image from the mirror).

Given that the mirror has a radius of 60.0 cm, we can determine the focal length using the formula:

f = R/2

f = 60.0 cm / 2

f = 30.0 cm

Since the image is upright and three times smaller, the magnification (m) is -3. Using the magnification formula:

magnification = -dᵢ/d₀

-3 = -dᵢ/d₀

From this equation, we can conclude that the image distance (dᵢ) is three times greater than the object distance (d₀).

Therefore, the location of the object will be closer to the mirror compared to the image. The image formed by the concave mirror will be real and located farther away from the mirror than the object.

To know more about concave mirror, click here:

https://brainly.com/question/3359672

#SPJ11

8. Liam is pushing a 60kg box across the floor. The box has a coefficient of friction of 0.35. He applies a force of 250N. When he has moved the box 15m, how much work has the net force done? (3 Marks

Answers

The net force has done 663 Joules of work on the box. The work done by the net force is equal to the force applied multiplied by the distance moved.

To calculate the work done by the net force, we need to determine the net force acting on the box and the distance over which the force is applied.

Given:

Mass of the box (m) = 60 kg

Coefficient of friction (μ) = 0.35

Applied force (F) = 250 N

Distance moved (d) = 15 m

First, let's find the magnitude of the frictional force ([tex]F_f[/tex]) using the equation:

[tex]F_f[/tex] = μ * Normal force

The normal force ([tex]F_n[/tex]) can be calculated as the weight of the box:

[tex]F_n[/tex] = m * g

where g is the acceleration due to gravity (approximately 9.8 m/s²).

[tex]F_n[/tex] = 60 kg * 9.8 m/s² = 588 N

Now, we can calculate the frictional force:

[tex]F_f[/tex] = 0.35 * 588 N = 205.8 N

The net force ([tex]F_net[/tex]) can be found by subtracting the frictional force from the applied force:

[tex]F_net[/tex] = F - [tex]F_f[/tex] = 250 N - 205.8 N = 44.2 N

Finally, we can calculate the net force by the net force:

Work = [tex]F_net[/tex] * d = 44.2 N * 15 m = 663 J

Therefore, the net force has done 663 Joules of work on the box.

To know more about the net force refer here :

https://brainly.com/question/18109210#

#SPJ11

what is happening when you attach a mass to a spring in a molecular level

Answers

When a mass is attached to a spring in molecular level, the spring undergoes a phenomenon called deformation. It is defined as the measure of the amount by which an object changes shape in response to an applied force or pressure.

Consider the simple harmonic motion of a spring: y = Asin (wt +Φ), where A is the amplitude, w is the angular frequency (w = 2πf, where f is the frequency of oscillation), and Φ is the phase constant. The motion of the mass is sinusoidal in this case, with the force obeying Hooke's Law. For an object on a spring, the force is F = -kx, where x is the displacement from equilibrium and k is the spring constant of the spring, a measure of its stiffness. For the motion of the mass on the spring, it obeys the equation:F = -kx = ma, where m is the mass of the object on the spring. Therefore, the frequency of the motion of the mass on the spring can be calculated as:f = (1/2π) * √k/m.

A mass attached to a spring undergoes a phenomenon called deformation. It is defined as the measure of the amount by which an object changes shape in response to an applied force or pressure. The deformation of a spring is proportional to the force applied to it. The proportionality constant is known as the spring constant k. Hooke's Law states that the force applied to a spring is proportional to the deformation of the spring. Mathematically, this can be written as:F = -kxwhere F is the force applied to the spring, x is the deformation of the spring, and k is the spring constant. The negative sign indicates that the force is in the opposite direction of the deformation. The mass oscillates back and forth around its equilibrium position, with a period that depends on the mass of the object and the spring constant of the spring. The motion of the mass is sinusoidal in this case, with the force obeying Hooke's Law. For an object on a spring, the force is F = -kx, where x is the displacement from equilibrium and k is the spring constant of the spring, a measure of its stiffness. For the motion of the mass on the spring, it obeys the equation:F = -kx = ma, where m is the mass of the object on the spring. Therefore, the frequency of the motion of the mass on the spring can be calculated as:f = (1/2π) * √k/m.

To know more about molecular level visit :-

https://brainly.com/question/2449642

#SPJ11

What is the buoyant force on a helium balloon in air if the balloon is spherical with diameter 28.5cm ? FB =

Answers

The buoyant force on a helium balloon in air, if the balloon is spherical with a diameter of 28.5 cm, is 14.91 N.

To find the buoyant force on a helium balloon in air, we need to use the formula: FB = V * ρ * g where FB is the buoyant force, V is the volume of the object, ρ is the density of the fluid and g is the acceleration due to gravity. Here, the fluid is air. Given that the diameter of the spherical balloon is 28.5 cm. The radius is given by:

r = d/2 = 28.5/2 cm = 14.25 cm.

The volume of a sphere is given by the formula:

V = (4/3) * π * r³.

Substituting the values, we get:

V = (4/3) * π * (14.25)³ cm³= 11437.91 cm³.

We know that the density of air is approximately 1.29 kg/m³.

We convert the density of air to the appropriate units of cm³ as:

1 kg/m³ = 1 g/L = 1 g/cm³ = 0.001 g/cm³.

Hence, density of air in g/cm³ = 1.29 * 0.001 g/cm³ = 0.00129 g/cm³. The acceleration due to gravity, g = 9.8 m/s². We need to convert this to cm/s² as the remaining values are in cm and g. 1 m = 100 cm. Hence, g in cm/s² = 9.8 m/s² * 100 cm/m = 980 cm/s². Substituting the values in the formula: FB = V * ρ * g= 11437.91 * 0.00129 * 980 g.cm/s²= 14.91 N.

To know more about buoyant force visit:

https://brainly.com/question/20165763

#SPJ11

is the following statement about our solar system true or false? jupiter's volume is more than ten times as large as saturn's volume.

Answers

Jupiter's volume is more than ten times as large as Saturn's volume. This statement is true. Jupiter is the largest planet in our solar system with a volume of about 1,431,281,810,739 km³ while Saturn is the second-largest planet with a volume of about 827,129,915,150 km³.

Jupiter is approximately 11 times larger than Saturn. The two planets belong to the gas giant category, and they share many similarities such as having a large number of moons. Jupiter is famous for its Great Red Spot and powerful magnetic field, while Saturn is well-known for its stunning ring system. Both planets have been the focus of scientific research and exploration, and they continue to fascinate scientists and stargazers alike. In conclusion, Jupiter's volume is more than ten times as large as Saturn's volume.

to know more about ring system visit:

https://brainly.com/question/2840305

#SPJ11

What will be the length of the gold wire?
What will be the length of the copper wire?
What will be the length of the aluminum wire?
Gold has a density of 1.93×1041.93×104 kg/m3kg/m3. What will be
th

Answers

1. The length of the gold wire would be 0.064 meters.

2. The length of the copper wire would be approximately 0.460 meters.

3. The length of the aluminum wire would be 0.574 meters.

What will be the lengths of the wires required?

To calculate the length of each wire, we can use the formula for resistance:

R = (ρ * L) / A

where

R is the resistance, ρ is the resistivity of the material, L is the length of the wire, and A is the cross-sectional area of the wire.

For each wire:

Gold wire:

Resistance (R) = 5.00 Ω

Diameter (d) = 2.00 mm = 0.002 m

Radius (r) = d/2 = 0.001 m

Area (A) = π * r² = π * (0.001 m)²

Area = 3.14 x 10⁻⁶ m²

Resistivity (ρ) for gold = 2.44 x 10⁻⁸ Ω·m

Using the resistance formula, we can solve for the length (L):

L = (R * A) / ρ

L = (5.00 Ω * 3.14 x 10⁻⁶ m²) / (2.44 x 10⁻⁸ Ω·m)

L ≈ 0.064 m

Copper wire:

The resistance and diameter of the copper wire are the same as the gold wire.

Resistivity (ρ) for copper = 1.72 x 10⁻⁸ Ω·m (at room temperature)

Using the same resistance formula:

L = (R * A) / ρ

L = (5.00 Ω * 3.14 x 10⁻⁶ m²) / (1.72 x 10⁻⁸ Ω·m)

L ≈ 0.460 m

Aluminum wire:

The resistance and diameter of the aluminum wire are the same as the gold and copper wires.

Resistivity (ρ) for aluminum = 2.75 x 10⁻⁸ Ω·m (at room temperature)

Using the same resistance formula:

L = (R * A) / ρ

L = (5.00 Ω * 3.14 x 10⁻⁶ m²) / (2.75 x 10⁻⁸ Ω·m)

L ≈ 0.574 m

Learn more about Resistivity at: https://brainly.com/question/30934104

#SPJ4

Complete question:

You want to produce three 2.00-mm-diameter cylindrical wires, each with a resistance of 5.00 at room temperature. One wire is gold and one is aluminum (pa =2.75 108 - m). What will be the length of the gold wire? What will be the length of the copper wire? What will be the length of the aluminum wire? Gold has a density of 1.93×1041.93×104 kg/m3kg/m3.

Calculate Neptune's mass given the acceleration due to gravity at the north pole is 11.529 m/s2 and the radius of Neptune at the pole is 24,340 km.
A.) M-Calculated kg
B.) M-Calculated/M-Accepted

Answers

M-Calculated = 1.03 × 10²⁶ kg. Option B cannot be identified since there is no recognized value provided for comparison.

The formula for the acceleration due to gravity is given as:

g = G (M/R²)

where, M = Mass of Neptune

R = Radius of Neptune at the north pole

G = Universal Gravitational Constant

g = Acceleration due to gravity at the north pole of Neptune

R = 24340 km = 24340000 m (Converting km to m)

g = 11.529 m/s²

Substituting the given values in the formula, we get

11.529 = G (M/ (24340000)²)

G = 6.67 × 10⁻¹¹ Nm²/kg²

Substituting the value of G in the above equation and solving for M, we get

= gR²/G= (11.529) × (24340000)² / (6.67 × 10⁻¹¹)

= 1.03 × 10²⁶ kg

M-Calculated = 1.03 × 10²⁶ kg

Since no accepted value is given for comparison, option B cannot be determined.

Learn more about the acceleration due to gravity: https://brainly.com/question/29135987

#SPJ11

rubbing two objects together may cause large number of electrons to be transferred from one object to the other. group of answer choices true false

Answers

When two objects rub against each other, the friction created transfers the electrons from one object to the other, causing a buildup of static electricity.

When two objects rub against each other, the friction created transfers the electrons from one object to the other, causing a buildup of static electricity. Rubbing two objects together can cause a transfer of electrons between them, and this is called the triboelectric effect. The movement of electrons from one object to the other is due to the difference in their electron affinity, or the ease with which they can give up or accept electrons.

The object that has the greater affinity for electrons will take electrons from the other object, causing the other object to become positively charged while the object that gained electrons will become negatively charged. This buildup of static electricity can be seen in everyday life when we rub our feet on carpet and touch a metal doorknob, resulting in a shock.

Learn more about triboelectric effect here:

https://brainly.com/question/12363708

#SPJ11

Other Questions
Compare how the Realistic Theory of political power the Historical Materialism will explain the attitude of (Frustration) the British Government and East Indian Company the precipitation of the Opium War? EXPLAIN THE CONCEPTS OF MARKETING TO SOMEONE WHO HAS NO CLUE WHAT MARKETING IS LIKE MYSELF Consider a market in which there are many potential buyers and sellers of used cars. Each potential seller has one car, which is either of high quality (a plum) or low quality (a lemon). A seller with a low-quality car is willing to sell it for $3,500, whereas a seller with a high-quality car is willing to sell it for $9,000. A buyer is willing to pay $4,500 for a low-quality car and $11,000 for a high-quality car. Of course, only the seller knows whether a car is of high or low quality, as illustrated in the accompanying image. Employees' posts on social media may be protected under labor law. true or false The maximum allowable deflection for joists, beams and girders is1/300" of the span. Tesla has crazy growth rate in the past 3 years:2019: $-.862B2020: $721B2021: $5,519BAmong the 5 theories of profit (e.g., innovation, managerial efficiency, etc.), which theory applies to Tesla and why? Identify what type of evidence of evolution each of the examples demonstrates. Identify what type of evidence of evolution each of the examples demonstrates. a. Changes in trilobite morphology over time b. Gill ridges in human and fish embryos [ c. The similar shape of sharks and dolphins d. Kale, broccoli, and cabbage e. Darwin's finches f. Endemic island species g. Recognizable, but specialized forelimb bones in different vertebrates h. Different types of cattle i. Wings of butterflies and birds suppose we want a satellite to revolve around the earth 4 times a day. what should the radius of its orbit be? (neglect the presence of the moon.) Billy purchases an investment where he feels he has the same chance of doubling his investment or losing half his investment. What is his expected return?Question 8 options:a) 50%b) 25%c) -50%d) 200%e) None of the listed answers Linda decided to borrow $350,000 from a bank to buy her dream house. She approached Prosperity Bank and they offered Linda the following mortage package: interest rate of 2.45 % per year, weekly repayment, for 30 years. Required: a) Calculating the amount of weekly repayment Linda needs to make for the mortgage.ANSWER a):b) Linda is considering two investment offers for saving up money to pay off her mortage in 10 years. Investment A offers the rate of return of 9.95% per year, compounding daily. Investment B offers the rate of return of 10% per year, compounding quarterly. Help Linda choose the better investment by calculating Effective Annual Interest Rate (EAR).ANSWER b): 4 A piece of pie rated at 400 Calories is equivalent to calories of thermal energy or Joules of mechanical energy. Linking Concepts How does the principle of marginal thinking relate to the decision to free-ride? Give an example that is not included in the textbook. Answer the prompt using at least four sentences. eader View Available = Chegg Question: Willow, Inc., Has Current Assets Of $ 220 Million; Property, Plant, And Equipment... Willow, Inc., has current assets of $ 220 million; property, plant, and equipment of $ 320 million; and other assets totaling $130 million. Current liabilities are $ 160 million and long-term liabilities total $ 380 million. 1. Use these data to write Willow's accounting equation. 2. How much in resources does Willow have to work with? 3. How much does Willow owe creditors? 4. How much of the company's assets do the Willow stockholders actually own? Expert Answer: 5G This problem has been solved! See the answer 100% A cartel, consisting of firms A and B, has allocated production such that A produces 50 units and B produces 50 units. Each firm has the following marginal cost function: B. C. A's marginal cost: MCA = 2000N) where QA is A's production B's marginal cost: MC3 = 40(Q) where Qgis B's production In order to maximize cartel (joint) profit the cartel should: A. have A produce more and B produce less. have A produce less and B produce more. maintain each firm's production at their current levels. [14] A monopolistically competitive firm can raise its price somewhat without fear of losing all its sales because of: brand loyalty. economies of scale. large market shares of firms in the market. high barriers to entry. [15] The market price under monopoly tends to be than the market price under pure competition. A. B. C. D. A. B. higher lower [16] A. B. C. D. Which of the following weaken the ability of firms to form a cartel? Firms have high inventories There are a large number of firms attempting to cooperate Firms sell a homogeneous product all of the above The Herfindahl index in the case of monopolistic competition: [17] A. B. C. D. equals 10,000 equals 0. exceeds 10,000. lies between 0 and 10,000. A. B. [18] According to the kinked demand curve model, firms expect their rivals to match any price increases (i.e., if a firm increases its price it expects all other firms to increase their prices). True False [19] In monopolistically competitive markets, firms price their product above their marginal cost. A. B. True False find the centroid of the region bounded by the given curves y = sin x y = cos x A list showing the amount due from each customer as of a specified date is known as a a. trial balance. b. work sheet. c. schedule of accounts receivable. d. schedule of accounts payable. What is true about income redistribution?A. Through income tax and redistribution, a dollar taken from a rich person ends up as a dollar in the hands of a poorer person.B. Taxing people's income from employment makes them work more so that their take-home income will increase.C. The greater the amount of income redistribution through income taxes, the greater is the inefficiency.D. The big tradeoff is the tradeoff between income tax and redistribution. While average return Next question seems to be a reasonable measure of risk when evaluating a large portfolio, the OA. mode, volatility OB. mode, mean return OC. the mean return, standard deviation OD. volatility, volatility of an individual security does not explain the size of its see see suppose a superior technology has become available for an economy but its spreads only gradually. this is a source of inefficiency for the economy. evaluate whether is true or false and why? When chase was on his roof, what did he see wedged behind the loose wood?