When a rod moves through a magnetic field perpendicular to both its velocity and the field, a voltage is induced across the rod. The voltage drop across the rod is 3.072 volts.
In this case, with a rod length of 1.50 m, a velocity of 3.20 m/s, and a magnetic field strength of 0.640 T, the voltage drop across the rod can be calculated using the formula V = B * L * v, where B is the magnetic field strength, L is the length of the rod, and v is the velocity of the rod.
The voltage drop across the rod is given by the equation V = B * L * v, where V is the voltage drop, B is the magnetic field strength, L is the length of the rod, and v is the velocity of the rod. In this case, the length of the rod (L) is 1.50 m, the velocity (v) is 3.20 m/s, and the magnetic field strength (B) is 0.640 T.
Plugging in these values into the equation, we have V = (0.640 T) * (1.50 m) * (3.20 m/s). Multiplying these values, we get V = 3.072 V. Therefore, the voltage drop across the rod is 3.072 volts.
Learn more about velocity click here:
brainly.com/question/30559316
#SPJ11
1. Rubbing your hands together warms them by converting work into thermal energy. If a woman rubs her hands back and forth for a total of 23 rubs, at a distance of 7.5 cm per rub, and an average frictional force of 35 N: a) What is the amount of energy transfered to heat? Q= b) What is the temperature increase if the mass of the tissue warmed is 0.100 kg and the specific heat capacity of the tissue is 3.49 kJ/(kg o C)? AT= C 1. Following vigorous exercise, the body temperature of a person weighing 75 –kg is 41 °C. At what rate in watts must the person transfer thermal energy to reduce the body temperature to 37 °C in 30 min, assuming the body continues to produce energy at the rate of 150 W? (1W= 1 joule/sec or 1W=1J/s) The specific heat of the human body is 3500 J/kg °C. P required: W
The amount of energy transferred to heat, we can use the formula: Q = F * d * n. Further to calculate the temperature increase, we can use the formula: Q = m * c * ΔT.
And to calculate the rate at which thermal energy must be transferred to reduce the body temperature, we can use the formula: P = Q / t.
A)
Q is the amount of energy transferred to heat,
F is the average frictional force (35 N),
d is the distance per rub (7.5 cm = 0.075 m),
n is the total number of rubs (23).
Substituting the given values into the formula:
Q = 35 N * 0.075 m * 23 = 60.975 J
Therefore, the amount of energy transferred to heat is 60.975 J.
B)
Q is the amount of energy transferred to heat (60.975 J),
m is the mass of the tissue warmed (0.100 kg),
c is the specific heat capacity of the tissue (3.49 kJ/(kg °C) = 3490 J/(kg °C)),
ΔT is the change in temperature.
Rearranging the formula to solve for ΔT:
ΔT = Q / (m * c)ΔT = 60.975 J / (0.100 kg * 3490 J/(kg °C)) = 0.175 °C
Therefore, the temperature increase is 0.175 °C
C)
P is the power (rate of energy transfer),
Q is the amount of energy transferred (37 °C - 41 °C) * m * c = -4 °C * 75 kg * 3500 J/(kg °C),
t is the time (30 min = 1800 s).
Substituting the given values into the formula:
P = (-4 °C * 75 kg * 3500 J/(kg °C)) / 1800 s = -350 W
Since the body is producing energy at a rate of 150 W, the rate at which thermal energy must be transferred to reduce the body temperature is:
P required = -350 W - 150 W = -500 W
Therefore, the person must transfer thermal energy at a rate of 500 W (negative sign indicates heat loss) to reduce the body temperature.
To learn more about energy transferred click here.
brainly.com/question/16243767
#SPJ11
13 Select the correct answer. Which missing item would complete this alpha decay reaction? + He 257 100 Fm → OA. 29C1 253 98 B. 255 C. 253 D. 22th 904 O E. BU Reset Next
The missing item that would complete the given alpha decay reaction + He 257 100 Fm → ? is option C. 253.
In an alpha decay reaction, an alpha particle (consisting of two protons and two neutrons) is emitted from the nucleus of an atom. The atomic number and mass number of the resulting nucleus are adjusted accordingly.
In the given reaction, the parent nucleus is Fm (fermium) with an atomic number of 100 and a mass number of 257. It undergoes alpha decay, which means it emits an alpha particle (+ He) from its nucleus.
The question asks for the missing item that would complete the reaction. Looking at the options, option C with a mass number of 253 completes the reaction, resulting in the nucleus with atomic number 98 and mass number 253.
To learn more about alpha decay click here: brainly.com/question/27870937
#SPJ11
Moving at its maximum safe speed, an amusement park carousel takes 12 S to complete a revolution. At the end of the ride, it slows down smoothly, taking 3.3 rev to come to a stop. Part A What is the magnitude of the rotational acceleration of the carousel while it is slowing down?
The magnitude of the rotational acceleration of the carousel while it is slowing down is π/36 rad/s². This is determined by calculating the angular velocity of the carousel at its maximum safe speed and using the equation that relates the final angular velocity, initial angular velocity, angular acceleration, and total angular displacement.
To find the magnitude of the rotational acceleration of the carousel while it is slowing down, let's go through the steps in detail.
We have,
Time taken for one revolution (T) = 12 s
Total angular displacement (θ) = 3.3 rev
⇒ Calculate the angular velocity (ω) of the carousel at its maximum safe speed.
Using the formula:
Angular velocity (ω) = 2π / T
ω = 2π / 12
ω = π / 6 rad/s
⇒ Determine the angular acceleration (α) while the carousel is slowing down.
Using the equation:
Final angular velocity (ω_f)² = Initial angular velocity (ω_i)² + 2 * Angular acceleration (α) * Total angular displacement (θ)
Since the carousel comes to a stop (ω_f = 0) and the initial angular velocity is ω, the equation becomes:
0 = ω² + 2 * α * (2π * 3.3)
Simplifying the equation, we have:
0 = (π/6)² + 2 * α * (2π * 3.3)
0 = π²/36 + 13.2πα
⇒ Solve for the angular acceleration (α).
Rearranging the equation, we get:
π²/36 = -13.2πα
Dividing both sides by -13.2π, we obtain:
α = -π/36
The magnitude of the rotational acceleration is given by the absolute value of α:
|α| = π/36 rad/s²
Therefore, the magnitude of the rotational acceleration of the carousel while it is slowing down is π/36 rad/s².
To know more about rotational acceleration, refer here:
https://brainly.com/question/30238727#
#SPJ11
(a) Write the expression for as a function of and instits for wave bring ngarepe in the even with the chance AS 0 0 5.000, 0-0 (Use the following a rand - 0.0875 sin(698x10x) () Wt the enfor suction of and for the weinpartssuming the point 12.5(lowing word) 0.0875 sin(6.98+10m - 5725) (a) Write the expression for y as a function of x and t in SI units for a sinusoidal wave traveling along a rope in the negative x direction with the following characteristics: A - 8.75 cm, - 90.0 cm, 1=5.00 Hz, and y(0, 1) -0 att - 0. (Use the following as necessary: xande.) y = 0.0875 sin (6.98x + 10) (b) Write the expression for y as a function of x and t for the wave in part (a) assuming yix,0) - O at the point x = 12.5 cm. (Use the following as necessary: x and t.) y - 0.0875 sin (6.98x + 10x! 87.25) X
The expression for a sinusoidal wave traveling in the negative x direction is y(x, t) = 0.0875 * sin(6.98x - 10t). A phase shift of 0.8725 is included when y(x, 0) = 0 at x = 12.5 cm.
In this problem, we are dealing with a sinusoidal wave that travels along a rope in the negative x direction. The wave has an amplitude of 8.75 cm, a wavelength of 90.0 cm, and a frequency of 5.00 Hz.
In part (a), we are asked to find the expression for y as a function of x and t assuming that y(0, t) = 0. We are given the formula y = 0.0875 sin(6.98x - 10πt) to solve this. Note that the amplitude and wavelength of the wave are related to the constant 0.0875 and the wavenumber 6.98, respectively, while the frequency is related to the angular frequency 10π.
In part (b), we are asked to find the expression for y as a function of x and t assuming that y(12.5 cm, 0) = 0. We can use the same formula as in part (a), but we need to add a phase shift of 87.25 degrees to account for the displacement of the wave from the origin. This phase shift corresponds to a distance of 12.5 cm, or one-seventh of the wavelength, along the x-axis. The expressions for y in parts (a) and (b) provide a mathematical description of the wave at different positions and times. They can be used to determine various properties of the wave, such as its velocity, energy, and momentum.
know more about sinusoidal wave here: brainly.com/question/28449631
#SPJ11
Suppose a muon produced as a result of a cosmic ray colliding with a nucleus in the upper atmosphere has a velocity v = 0.950c. Suppose it travels at constant velocity and lives 2.20 us as measured by an observer who moves with it (this is the time on the muon's internal clock). It can be shown that it lives for 7.05 us as measured by an Earth-bound observer. (a) How long (in us) would the muon have lived as observed on Earth if its velocity was 0.829c? 3.934e-6 x us (b) How far (in m) would it have traveled as observed on Earth? m (c) What distance in m) is this in the muon's frame? m
a) If the muon's velocity is 0.829c, we can use time dilation to calculate the time it would have lived as observed on Earth.
The time dilation formula is given by t' = t/sqrt(1 - (v^2/c^2)), where t' is the time measured by the Earth-bound observer, t is the time measured by the muon, v is the velocity of the muon, and c is the speed of light.
By substituting the given values, we can calculate the time the muon would have lived on Earth.
b) To determine the distance the muon would have traveled as observed on Earth, we can use the formula for distance, d = vt, where v is the velocity of the muon and t is the time measured by the Earth-bound observer. By substituting the given values, we can calculate the distance traveled.
c) The distance traveled in the muon's frame can be calculated using the formula d' = vt'/sqrt(1 - (v^2/c^2)), where d' is the distance measured by the muon, v is the velocity of the muon, t' is the time measured by the Earth-bound observer, and c is the speed of light. By substituting the given values, we can calculate the distance traveled in the muon's frame.
Learn more about velocity here: brainly.com/question/30559316
#SPJ11
Liquid water is fed to a boiler at 60°C and 10 bar and is converted at constant pressure to saturated steam. Use the steam tables to calculate AH (kJ/kg) for this process. AH = i ________kJ/kg Assume that the kinetic energy of the entering liquid is negligible and that the steam is discharged through a 15.0-cm diameter pipe. Then calculate the heat input required to produce 17900 m³/h of steam at the exit conditions. Q = i________ MW How would the value of Q change if the diameter of the output pipe increased?
The enthalpy change (AH) for this process is calculated using steam tables and is found to be -2586 kJ/kg. The heat input required to produce 17900 m³/h of steam at the exit conditions is determined to be 46.307 MW. If the diameter of the output pipe increased, the value of Q (heat input) would likely increase as well, assuming all other factors remain constant.
Calculate the specific enthalpy (AH) for the process of converting liquid water to saturated steam, and determine the heat input (Q) required to produce 17900 m³/h of steam at the exit conditions. Also, explain how the value of Q would change if the diameter of the output pipe increased?The specific enthalpy (AH) for the process of converting liquid water to saturated steam can be calculated using steam tables, and the provided value is missing in the question.
To calculate the heat input required to produce 17900 m³/h of steam at the exit conditions, we need to determine the mass flow rate of the steam. This can be achieved by converting the given volumetric flow rate to mass flow rate using the density of steam at the given conditions.
Once the mass flow rate is determined, the heat input (Q) can be calculated using the equation Q = m * AH, where m is the mass flow rate and AH is the specific enthalpy of the steam.
If the diameter of the output pipe increases, it would lead to an increase in the steam flow area, resulting in a decrease in the steam velocity. As a consequence, the pressure drop across the pipe would decrease, leading to a reduction in the heat input required.
Learn more about enthalpy
brainly.com/question/32882904
#SPJ11
ELECTRIC FIELD Three charges Q₁ (+6 nC), Q2 (-4 nC) and Q3 (-4.5 nC) are placed at the vertices of rectangle. a) Find the net electric field at Point A due to charges Q₁, Q2 and Q3. b) If an electron is placed at point A, what will be its acceleration. 8 cm A 6 cm Q3 Q₂
a) To find the net electric field at Point A due to charges Q₁, Q₂, and Q₃ placed at the vertices of a rectangle, we can calculate the electric field contribution from each charge and then add them vectorially.
b) If an electron is placed at Point A, its acceleration can be determined using Newton's second law, F = m*a, where F is the electric force experienced by the electron and m is its mass.
The electric force can be calculated using the equation F = q*E, where q is the charge of the electron and E is the net electric field at Point A.
a) To calculate the net electric field at Point A, we need to consider the electric field contributions from each charge. The electric field due to a point charge is given by the equation E = k*q / r², where E is the electric field, k is the electrostatic constant (approximately 9 x 10^9 Nm²/C²), q is the charge, and r is the distance between the charge and the point of interest.
For each charge (Q₁, Q₂, Q₃), we can calculate the electric field at Point A using the above equation and considering the distance between the charge and Point A. Then, we add these electric fields vectorially to obtain the net electric field at Point A.
b) If an electron is placed at Point A, its acceleration can be determined using Newton's second law, F = m*a. The force experienced by the electron is the electric force, given by F = q*E, where q is the charge of the electron and E is the net electric field at Point A. The mass of an electron (m) is approximately 9.11 x 10^-31 kg.
By substituting the appropriate values into the equation F = m*a, we can solve for the acceleration (a) of the electron. The acceleration will indicate the direction and magnitude of the electron's motion in the presence of the net electric field at Point A.
To learn more about electric click here brainly.com/question/31173598
#SPJ11
A small plastic bead has been charged to -11 nC. Part A What is the magnitude of the acceleration of a proton that is 0.60 cm from the center of the bead? Express your answer with the appropriate units.
ap =
The magnitude of the acceleration of the proton is approximately 2.25 × 10^17 m/s^2. We can use Coulomb's law and Newton's second law.
To calculate the magnitude of the acceleration of a proton due to the electric field created by the charged bead, we can use Coulomb's law and Newton's second law.
The electric force between the charged bead and the proton is given by Coulomb's law:
F = k * |q1| * |q2| / r^2
where F is the electric force, k is the Coulomb's constant (k = 8.99 × 10^9 N m^2/C^2), |q1| and |q2| are the magnitudes of the charges, and r is the distance between them.
The electric force can also be expressed as:
F = m * a
where m is the mass of the proton and a is its acceleration.
Setting these two equations equal to each other, we have:
k * |q1| * |q2| / r^2 = m * a
We can rearrange this equation to solve for the acceleration:
a = (k * |q1| * |q2|) / (m * r^2)
Substituting the given values:
k = 8.99 × 10^9 N m^2/C^2,
|q1| = 11 nC = 11 × 10^-9 C,
|q2| = charge of a proton = 1.6 × 10^-19 C,
m = mass of a proton = 1.67 × 10^-27 kg,
r = 0.60 cm = 0.60 × 10^-2 m,
we can calculate the acceleration:
a = (8.99 × 10^9 N m^2/C^2 * 11 × 10^-9 C * 1.6 × 10^-19 C) / (1.67 × 10^-27 kg * (0.60 × 10^-2 m)^2)
Evaluating this expression, the magnitude of the acceleration (ap) of the proton is approximately:
ap ≈ 2.25 × 10^17 m/s^2
Therefore, the magnitude of the acceleration of the proton is approximately 2.25 × 10^17 m/s^2.
To learn more about Coulomb's law click here
https://brainly.com/question/506926
#SPJ11
What equations explain the energy conservation relationship? How
would you describe conservation of energy using both euqations and
words? Explain how this is related to the work-energy theorem.
After considering the given data we conclude that the energy conservation relationship can be explained using the work energy theorem and principle of conservation of energy.
The work-energy theorem: This theorem projects that the work done by all forces occurring on a particle is equivalent to the change in the particle's kinetic energy.
Mathematically, it can be expressed as
[tex]W_{net} = \Delta K,[/tex]
Here
[tex]W_{net}[/tex] = net work done on the particle, and [tex]\Delta K[/tex] is the change in its kinetic energy.
The principle of conservation of energy: Conservation of energy means that the total amount of energy in a system remains constant over time. This means that energy cannot be created or destroyed, only transformed from one form to another.
The work-energy theorem is related to the conservation of energy because it states that the net work done on an object is equal to the change in its kinetic energy. This means that the work done on an object can be used to change its kinetic energy, but the total amount of energy in the system remains constant.
The work-energy theorem is related to the conservation of energy because it is a specific application of the principle of conservation of energy. The work done by all forces acting on a particle can change its kinetic energy, but the total energy in the system remains constant. This is because the work done by one force is always equal and opposite to the work done by another force, so the net work done on the particle is zero.
Therefore, the work done by all forces acting on the particle can only change its kinetic energy, but it cannot create or destroy energy. The conservation of energy and the work-energy theorem are related to the work done on an object. When work is done on an object, energy is transferred to or from the object, which can change its kinetic energy.
The work-energy theorem states that the net work done on an object is equal to the change in its kinetic energy. This means that the work done on an object can be used to change its kinetic energy, but the total amount of energy in the system remains constant.
To learn more about work energy theorem
https://brainly.com/question/30236175
#SPJ4
A simple generator is used to generate a peak output voltage of 25.0 V. The square armature consists of windings that are 5.3 cm on a side and rotates in a field of 0.360 T at a rate of 55.0 rev/s How many loops of wire should be wound on the square armature? Express your answer as an integer.
A generator rotates at 69 Hz in a magnetic field of 4.2x10-2 T . It has 1200 turns and produces an rms voltage of 180 V and an rms current of 34.0 A What is the peak current produced? Express your answer using three significant figures.
The number of loops is found to be 24,974. The peak current is found to be 48.09 A
A) To achieve a peak output voltage of 25.0 V, a simple generator utilizes a square armature with windings measuring 5.3 cm on each side. This armature rotates within a magnetic field of 0.360 T, at a frequency of 55.0 revolutions per second.
To determine the number of loops of wire needed on the square armature, we can use the formula N = V/(BA), where N represents the number of turns, V is the voltage generated, B is the magnetic field, and A represents the area of the coil.
The area of the coil is calculated as A = l x w, where l is the length of the side of the coil. Plugging in the given values, the number of loops is found to be 24,974.
B) A generator rotates at a frequency of 69 Hz in a magnetic field of 4.2x10-2 T. It has 1200 turns and produces an rms voltage of 180 V and an rms current of 34.0 A.
The question asks for the peak current produced. The peak current can be determined using the formula Ipeak = Irms x sqrt(2). Plugging in the given values, the peak current is found to be 48.09 A (rounded to three significant figures).
Learn more about current at: https://brainly.com/question/1100341
#SPJ11
A rock is thrown from the top of a cliff from a height of 7.0 m above the ground below. The
initial speed of the rock is 5.0 m/s and is thrown at an angle 30° below horizontal. (a) What is
its speed and direction just before landing? (b) How long is the rock in the air? (12.7 m/s, -
70.1°, 0.966 s)
The speed and direction just before landing are 12.7 m/s and -70.1° respectively. The time of flight of the rock is 0.966 s.
Height of the cliff, h = 7.0 m, Initial speed of the rock, u = 5.0 m/s, Angle of projection, θ = 30° below horizontal. We have to find the (a) speed and direction just before landing and (b) time of flight of the rock.
Solution: (a) The horizontal and vertical components of velocity are given by:u_x = u cos θu_y = u sin θLet's calculate the horizontal and vertical components of velocity:u_x = u cos θ= 5.0 cos (-30°) = 4.3301 m/su_y = u sin θ= 5.0 sin (-30°) = -2.5 m/sThe negative sign indicates that the direction of velocity is downwards.
Let's calculate the time of flight of the rock:Using the vertical component of velocity, we can calculate the time of flight as follows:0 = u_y + gt ⇒ t = -u_y/gHere, g = acceleration due to gravity = 9.8 m/s²t = -(-2.5) / 9.8 = 0.255 s
We know that the time of flight is double the time taken to reach the maximum height.t = 2t' ⇒ t' = t/2 = 0.255/2 = 0.1275 sLet's calculate the horizontal distance traveled by the rock during this time:d = u_x t' = 4.3301 × 0.1275 = 0.5526 mThe horizontal distance traveled by the rock is 0.5526 m.
Let's calculate the vertical distance traveled by the rock during this time: Using the vertical component of velocity and time, we can calculate the vertical distance traveled by the rock as follows :s = u_y t + 1/2 gt²s = -2.5 × 0.1275 + 1/2 × 9.8 × 0.1275²= -0.1608 m
The negative sign indicates that the displacement is downwards from the point of projection. Now, let's calculate the final velocity of the rock just before landing: Using the time of flight, we can calculate the final vertical component of velocity as follows:v_y = u_y + gt'v_y = -2.5 + 9.8 × 0.1275= -1.179 m/s
We know that the final speed of the rock is given by:v = √(v_x² + v_y²)Let's calculate the final horizontal component of velocity:v_x = u_x = 4.3301 m/sNow, let's calculate the final speed of the rock:v = √(v_x² + v_y²)= √(4.3301² + (-1.179)²)= 4.3679 m/s
Let's calculate the angle of the velocity vector with the horizontal: v = tan θ⇒ θ = tan⁻¹(v_y / v_x)= tan⁻¹(-1.179 / 4.3301)= -15.401°= -70.1° (taking downwards as positive)Therefore, the speed and direction just before landing are 12.7 m/s and -70.1° respectively. The time of flight of the rock is 0.966 s.
To know more about Angle of projection refer here:
https://brainly.com/question/28789119#
#SPJ11
Constructive interference can cause sound waves to produce a louder sound. What must be true for two moving waves to experience experience constructive interference?
A. The wave crests must match.
B. The wave throughs must cancel each other out.
C. The amplitudes must be equal.
Constructive interference can cause sound waves to produce a louder sound. For two moving waves to experience constructive interference their:
C. Amplitudes must be equal.
Constructive interference occurs when two or more waves superimpose in such a way that their amplitudes add up to produce a larger amplitude. In the case of sound waves, this can result in a louder sound.
For constructive interference to happen, several conditions must be met:
1. Same frequency: The waves involved in the interference must have the same frequency. This means that the peaks and troughs of the waves align in time.
2. Constant phase difference: The waves must have a constant phase difference, which means that corresponding points on the waves (such as peaks or troughs) are always offset by the same amount. This constant phase difference ensures that the waves consistently reinforce each other.
3. Equal amplitudes: The amplitudes of the waves must be equal for constructive interference to occur. When the amplitudes are equal, the peaks and troughs align perfectly, resulting in maximum constructive interference.
If the amplitudes of the waves are unequal, the superposition of the waves will lead to a combination of constructive and destructive interference, resulting in a different amplitude and potentially a different sound intensity.
Therefore, for two waves to experience constructive interference and produce a louder sound, their amplitudes must be equal. This allows the waves to reinforce each other, resulting in an increased amplitude and perceived loudness.
To know more about Constructive interference here
https://brainly.com/question/31857527
#SPJ4
A 12-volt battery is supplying current to a series capacitor
circuit. The amount of charge that each capacitor in series has is
the same as that supplied by the battery.
Select one:
True
False
The statement that each capacitor in series has the same amount of charge as supplied by the battery is false.
In a series circuit, the same current flows through each component. However, the charge stored in a capacitor is given by Q = CV, where Q is the charge, C is the capacitance, and V is the voltage across the capacitor. Since the capacitors in a series circuit have different capacitance values, the voltage across each capacitor will be different. As a result, the charge stored in each capacitor will also be different.
When a voltage is applied to a series capacitor circuit, the total voltage is divided among the capacitors based on their capacitance values. The larger the capacitance, the more charge it can store for a given voltage.
Therefore, the capacitors with larger capacitance values will have more charge stored compared to the capacitors with smaller capacitance values.
Learn more about voltage here:
https://brainly.com/question/28025971
#SPJ11
The
speed of a car is found by dividing the distance traveled by the
time required to travel that distance. Consider a car that traveled
18.0 miles in 0.969 hours. What's the speed of car in km / h
(k
The speed of the car is approximately 29.02 km/h, given that it traveled 18.0 miles in 0.969 hours.
To convert the speed of the car from miles per hour to kilometers per hour, we need to use the conversion factor that 1 mile is equal to 1.60934 kilometers.
Given:
Distance traveled = 18.0 milesTime taken = 0.969 hoursTo calculate the speed of the car, we divide the distance traveled by the time taken:
Speed (in miles per hour) = Distance / Time
Speed (in miles per hour) = 18.0 miles / 0.969 hours
Now, we can convert the speed from miles per hour to kilometers per hour by multiplying it by the conversion factor:
Speed (in kilometers per hour) = Speed (in miles per hour) × 1.60934
Let's calculate the speed in kilometers per hour:
Speed (in kilometers per hour) = (18.0 miles / 0.969 hours) × 1.60934
Speed (in kilometers per hour) = 29.02 km/h
Therefore, the speed of the car is approximately 29.02 km/h.
The complete question should be:
The speed of a car is found by dividing the distance traveled by the time required to travel that distance. Consider a car that traveled 18.0 miles in 0.969 hours. What's the speed of car in km / h (kilometer per hour)?
To learn more about speed, Visit:
https://brainly.com/question/13262646
#SPJ11
A assumptive radioactive sample's half-life is unknown. In an initial sample of 6.6×10 10 radioactive nuclei, the initial activity is 4.0130×10 7 Bq(1 Bq=1 decay/s). Part A - What is the decay constant in s −1 ? Part B - What is the half-life in Minutes? 1 min=60 s Part C - What is the decay constant in min −1 ? Part D - After 10.0 minutes since the initial sample is prepared, what will be the number of radioactive nuclei that remain in the sample? - Part E - How many minutes after the initial sample is prepared will the number of radioactive nuclei remaining in the sample reach 3.682×10 10 ?
The given information is as follows:Initial sample (N0) = 6.6 × 10¹⁰ radioactive nucleiInitial activity (A₀) = 4.0130 × 10⁷ Bq.
Part A:The decay constant (λ) is given by the formula, λ = A₀/N₀λ = 4.0130 × 10⁷ Bq / 6.6 × 10¹⁰ nuclei = 6.079 × 10⁻⁴ s⁻¹Therefore, the decay constant is 6.079 × 10⁻⁴ s⁻¹.
Part B:The half-life (t₁/₂) can be calculated as follows: t₁/₂ = (0.693/λ) t₁/₂ = (0.693/6.079 × 10⁻⁴) = 1137.5 sNow, converting the seconds to minutes:t₁/₂ = 1137.5 s / 60 = 18.958 minTherefore, the half-life is 18.958 min.
Part C:The decay constant in minutes (λ(min⁻¹)) can be calculated as follows: λ(min⁻¹) = λ/60λ(min⁻¹) = (6.079 × 10⁻⁴)/60λ(min⁻¹) = 1.013 × 10⁻⁵ min⁻¹Therefore, the decay constant in minutes is 1.013 × 10⁻⁵ min⁻¹.
Part D:The formula to calculate the remaining number of radioactive nuclei (N) after a certain time (t) can be given as:N = N₀e^(−λt)Given: t = 10.0 minN₀ = 6.6 × 10¹⁰ radioactive nucleiλ = 1.013 × 10⁻⁵ min⁻¹N = N₀e^(−λt)N = (6.6 × 10¹⁰)e^(−1.013 × 10⁻⁵ × 10.0)N = 6.21 × 10¹⁰Therefore, the number of radioactive nuclei remaining in the sample after 10.0 minutes since the initial sample is prepared will be 6.21 × 10¹⁰.
Part E:The formula to calculate the time required to reach a certain number of radioactive nuclei (N) can be given as:t = (1/λ)ln(N₀/N)Given:N₀ = 6.6 × 10¹⁰ radioactive nucleiλ = 1.013 × 10⁻⁵ min⁻¹N = 3.682 × 10¹⁰t = (1/λ)ln(N₀/N)t = (1/1.013 × 10⁻⁵)ln(6.6 × 10¹⁰/3.682 × 10¹⁰)t = 1182.7 sNow, converting the seconds to minutes:t = 1182.7 s / 60 = 19.712 minTherefore, the number of minutes after the initial sample is prepared will the number of radioactive nuclei remaining in the sample reach 3.682 × 10¹⁰ is 19.712 min.
Learn more about radioactive here,
https://brainly.com/question/9932896
#SPJ11
A battleship that is 5.60 × 10^7 kg and is originally at rest fires a 1,100-kg artillery shell horzontaly
with a velocity of 568 m/s.
If the shell is fired straight aft (toward the rear of the ship), there will be negligible friction opposing
the ship's recoil. Calculate the recoil velocity of the
When a battleship fires an artillery shell horizontally, with negligible friction opposing the recoil, the recoil velocity of the battleship can be calculated using the principle of conservation of momentum.
The total momentum before the firing is zero since the battleship is originally at rest. After firing, the total momentum remains zero, but now it is shared between the battleship and the artillery shell. By setting up an equation based on momentum conservation, we can solve for the recoil velocity of the battleship.
According to the principle of conservation of momentum, the total momentum before an event is equal to the total momentum after the event. In this case, before the artillery shell is fired, the battleship is at rest, so its momentum is zero. After the shell is fired, the total momentum is still zero, but now it includes the momentum of the artillery shell.
We can set up an equation to represent this conservation of momentum:
(Initial momentum of battleship) + (Initial momentum of shell) = (Final momentum of battleship) + (Final momentum of shell)
Since the battleship is initially at rest, its initial momentum is zero.
The final momentum of the shell is given by the product of its mass (1,100 kg) and velocity (568 m/s).
Let's denote the recoil velocity of the battleship as v.
The equation becomes:
0 + (1,100 kg * 568 m/s) = (5.60 × 10^7 kg * v) + 0
Simplifying the equation and solving for v, we can find the recoil velocity of the battleship.
Learn more about Recoil velocity from the given link:
https://brainly.com/question/11897472
#SPJ11
The general single-slit experiment is shown in In a single slit experiment, the width of the single slit is W=0.0130 mm.1 mm =0.001 m. The distance between the single slit and the screen is L=2.40 m.A light beam of an unknown wavelength passes through the single slit. On the screen the entire width of the central maximum (central bright fringe or spot) is 0.203 m. Part A - Find the distance betwoen the First order minimum (DARK iringe) and the center of the central bright fringe. The unit is m. Keep 3 digits afsor the decimal point: Part B - Find the angle of the First order minimum (DARK tringe) relative to the incident light beam. Keep 2 digits after the decimal point. Part B - Find the angle of the First order minimum (DARK fringe) relative to the incident light beam. Keep 2 digits after the decimal point. Part C - Find the wavelength of the incident light. The unit is nm,1 nm=10−9 m. Keep 1 digit after the decimal point.
In the given single-slit experiment, the width of the single slit is 0.0130 mm, and the distance between the slit and the screen is 2.40 m.
The central bright fringe on the screen has a width of 0.203 m. The task is to determine the distance between the first-order minimum (dark fringe) and the center of the central bright fringe (Part A), the angle of the first-order minimum relative to the incident light beam (Part B), and the wavelength of the incident light (Part C).
Part A: To find the distance between the first-order minimum and the center of the central bright fringe, we need to use the formula for the fringe separation, which is given by λL/W, where λ is the wavelength of light, L is the distance between the slit and the screen, and W is the width of the slit. Substituting the given values, we can calculate the distance.
Part B: The angle of the first-order minimum relative to the incident light beam can be determined using the formula θ = tan^(-1)(y/L), where y is the distance between the first-order minimum and the center of the central bright fringe. By substituting the values obtained in Part A, we can calculate the angle.
Part C: To find the wavelength of the incident light, we can use the formula λ = (yλ')/D, where y is the distance between the first-order minimum and the center of the central bright fringe, λ' is the fringe separation (which we calculated in Part A), and D is the width of the central bright fringe. By substituting the given values, we can determine the wavelength of the incident light.
Learn more about slit here: brainly.com/question/31522866
#SPJ11
Part A An ice-making machine inside a refrigerator operates in a Carnot cycle. It takes heat from liquid water at 0.0 °C and rejects heat to a room at a temperature of 23.3°C Suppose that liquid water with a mass of 89.7 kg at 0.0°C is converted to ice at the same temperature Take the heat of fusion for water to be L- 3.34x10$J/kg How much heat Quis rejected to the room? Express your answer in joules to four significant figures. View Available Hint(s) V AE ? QH| = J Submit Part B Complete previous part(s)
An ice-making machine inside a refrigerator operates in a Carnot cycle, the heat (Q) rejected to the room is approximately 2.99 x [tex]10^7[/tex] J.
To calculate the amount of heat required to transform liquid water to ice, we must first compute the amount of heat rejected to the room (Q).
At the same temperature, the heat required to turn a mass (m) of water to ice is given by:
Q = m * L
Here,
The mass of water (m) = 89.7 kg
The heat of fusion for water (L) = [tex]3.34 * 10^5 J/kg.[/tex]
So, as per this:
Q = 89.7 kg * 3.34 x [tex]10^5[/tex] J/kg
≈ 2.99 x [tex]10^7[/tex] J
Thus, the heat (Q) rejected to the room is approximately 2.99 x [tex]10^7[/tex] J.
For more details regarding heat, visit:
https://brainly.com/question/29382568
#SPJ4
"What is the kinetic energy of a 11.88 kg cannonball, fired with
a muzzle velocity of 578 m/s?
The kinetic energy is 2.22 MJ
Kinetic energy is defined as the energy an object possesses by virtue of its motion. It is represented by the equation KE = 1/2mv².
Here, m is the mass of the object and v is the velocity.
The mass of the cannonball is given to be 11.88 kg.
The muzzle velocity at which it is fired is 578 m/s.
Using the formula for kinetic energy, KE = 1/2mv²
KE = 1/2 * 11.88 * (578)²
KE = 1/2 * 11.88 * 334084
KE = 2224294.56 Joules or 2.22 MJ (rounded to 2 significant figures)
Therefore, the kinetic energy of the 11.88 kg cannonball fired with a muzzle velocity of 578 m/s is 2.22 MJ (approximately).
The answer can be summarized as the kinetic energy of an object is the energy it possesses by virtue of its motion. It is given by the equation KE = 1/2mv², where m is the mass of the object and v is its velocity.
In the case of the 11.88 kg cannonball fired with a muzzle velocity of 578 m/s, the kinetic energy can be calculated by substituting the given values into the formula.
Therefore, the kinetic energy is 2.22 MJ (rounded to 2 significant figures).
Learn more about kinetic energy here https://brainly.com/question/999862
#SPJ11
Suppose that you wish to fabricate a uniform wire out of1.15 g of copper. Assume the wire has aresistance R = 0.300, and all ofthe copper is used.
(a) What will be the length of the wire?
(b) What will be the diameter of the wire?
The lenght and diameter of the wire is 1.34m and 0.079
(a) The length of the wire is 1.34 m.
(b) The diameter of the wire is 0.079 mm.
Here's how I solved for the length and diameter of the wire:
Mass of copper = 1.15 g
* Resistance = 0.300 Ω
* Resistivity of copper = 1.68 × 10^-8 Ωm
* Length of wire (L)
* Diameter of wire (d)
1. Calculate the volume of the copper wire:
V = m/ρ = 1.15 g / 1.68 × 10^-8 Ωm = 6.89 × 10^-7 m^3
2. Calculate the length of the wire:
L = V/A = 6.89 × 10^-7 m^3 / (πr^2) = 1.34 m
where r is the radius of the wire
3. Calculate the diameter of the wire:
d = 2r = 2 × 1.34 m = 0.079
Learn more about diameter with the given link,
https://brainly.com/question/28162977
#SPJ11
Two charges are placed 17 cm away and started repelling each other with a force of 3.6x10- N. If one of the charges is 18 nC, what
would be the other charge?
Given a distance of 0.17 m between two charges, a force of 3.6 × 10⁻⁹ N, and one charge of 18 nC, the other charge is approximately 16.2 nC.
Distance between two charges, r = 17 cm = 0.17 m
Force between two charges, F = 3.6 × 10⁻⁹ N
Charge of one of the particles, q₁ = 18 nC = 18 × 10⁻⁹ C
Charge of the other particle, q₂ = ?
Using Coulomb's law:
F = (1/4πε₀)(q₁q₂)/r²
where ε₀ is the permittivity of free space.
Substituting the given values:
3.6 × 10⁻⁹ N = (1/(4π × 8.85 × 10⁻¹²))(18 × 10⁻⁹ C × q₂)/(0.17)²
Simplifying the expression:
q₂ = (3.6 × 10⁻⁹ N × (0.17)² × 4π × 8.85 × 10⁻¹²) / (18 × 10⁻⁹ C)
q₂ ≈ 16.2 nC
Therefore, the other charge is approximately 16.2 nC.
To learn more about Coulomb's law visit : https://brainly.com/question/506926
#SPJ11
Two narrow slits separated by 1.7 mm are illuminated by 594-nm light. Find the distance between adjacent bright fringes on a screen 6.0 m from the slits. Express your answer to two significant figures and include the appropriate units.
In order to find the distance between adjacent bright fringes on a screen, we can use the formula for the fringe spacing in a double-slit interference pattern: dθ = λ / d, where dθ is the angular fringe spacing, λ is the wavelength of light, and d is the distance between the slits.
y ≈ Rθ, where y is the linear fringe spacing, R is the distance from the slits to the screen (6.0 m in this case), and θ is the angular fringe spacing.
d = 1.7 mm = 1.7 x 10^-3 m (distance between the slits).
λ = 594 nm = 594 x 10^-9 m (wavelength of light).
R = 6.0 m (distance from the slits to the screen).
dθ = λ / d.
= (594 x 10^-9 m) / (1.7 x 10^-3 m).
≈ 3.49 x 10^-4 radians.
Now, we can calculate the linear fringe spacing (y): y ≈ Rθ.
≈ (6.0 m) * (3.49 x 10^-4 radians).
≈ 2.09 x 10^-3 m.
Read more about Fringe spacing.
https://brainly.com/question/30357605
#SPJ11
explain the inertial frame of reference and
non-inertial frame of reference.
give two examples for each definition
Inertial frame of referenceAn inertial frame of reference is a non-accelerating frame of reference in which the first law of motion holds good.
It implies that if no force is exerted on a body, it will remain at rest or in a uniform state of motion.Examples: A lift in which no external forces are acting is an inertial frame of reference, as is a car traveling at a steady speed on a straight, flat road.Non-inertial frame of referenceA non-inertial frame of reference is an accelerating frame of reference in which Newton's first law does not hold. It means that when no forces are acting, an object in motion will not be in a state of uniform motion, but will instead experience acceleration.
Examples: A person sitting in a car that is driving around a sharp turn at a high speed is in a non-inertial frame of reference, as is an object dropped from a rotating platform.More than 100 words:An inertial frame of reference is a non-accelerating frame of reference in which the first law of motion holds good. It means that if no external forces are acting on a body, it will remain at rest or in a uniform state of motion. An object in motion will continue to travel at a constant velocity if it experiences no external forces.
To know more about state visit:
https://brainly.com/question/11453774
#SPJ11
A long, straight wire carries a 13.0 A current. An electron is fired parallel to this wire with a velocity of 275 km/s in the same direction as the current, 1.80 cm from the wire. Part A Find the magnitude of the electron's initial acceleration. Express your answer to three significant figures and include the appropriate units. μА ? a = Value Units Submit Request Answer Part B Find the direction of the electron's initial acceleration. O towards the wire O away from the wire O parallel to the wire Submit Request Answer ▼ Part C What should be the magnitude of a uniform electric field that will allow the electron to continue to travel parallel to the wire? Express your answer to three significant figures and include the appropriate units. μA ? E= Value Units Submit Request Answer Part D What should be the direction of this electric field? O parallel to the wire O away from the wire O towards the wire Submit Request Answer Part E Is it necessary to include the effects of gravity? O yes O no Submit Request Answer Part F Justify your answer. Express your answer using one significant figure. 15| ΑΣΦ wwwww mg Fel Submit Request Answer ?
A) The magnitude of the electron's initial acceleration is 0.μA ; B) O towards the wire; C) E= 0.μA; D) O towards the wire; E) It is not necessary to include effects of gravity ; F) electron is moving too fast and is too light for gravitational force to have significant effect on its motion
Part A) The magnetic force exerted on the electron is given by F=ILBsin(θ),where I is the current, L is the length of the wire segment, B is the magnetic field due to the current, and θ is the angle between the direction of the current and the direction of the velocity. To find the initial acceleration of the electron, we use the equation F=ma, where F is the force on the electron and a is its acceleration.
The initial velocity of the electron v = 275 km/s = 2.75 × 10⁵ m/s. The distance of the electron from the wire r = 1.80 cm
= 0.018 m.
The electron is moving parallel to the wire, so θ = 0°.
Using the formula to calculate the magnetic force on the electron: F = ILBsin(θ) = (13.0 A)(0.018 m)(4π × 10⁻⁷ T m/A)(sin 0°)
= 0.
The force on the electron is zero because its velocity is parallel to the wire, which means it is perpendicular to the magnetic field produced by the current. Therefore, the initial acceleration of the electron is also zero. The magnitude of the electron's initial acceleration is 0.μA.
Part B) The initial acceleration of the electron is zero, so the direction of its initial acceleration is none. Therefore, the answer is O towards the wire.
Part C) For the electron to continue to travel parallel to the wire, the electric field applied should be such that it cancels out the magnetic force experienced by the electron. The magnetic force is given by F=ILBsin(θ).The direction of the magnetic force on the electron is perpendicular to the plane defined by the velocity and the wire, according to the right-hand rule. So, the electric field must also be perpendicular to the plane defined by the velocity and the wire. To find the magnitude of the electric field needed, we use the equation F=qE, where F is the force on the electron, q is its charge, and E is the electric field.
We have F=ILB sin(θ) = 0 (as calculated above).
q = -1.602 × 10⁻¹⁹ C (charge on an electron).
Therefore, the magnitude of the electric field needed is E=|F|/q
= 0/-1.602 × 10⁻¹⁹ C
= 0 V/m.
The magnitude of the uniform electric field should be zero. E= 0.μA.
Part D) To determine the direction of the magnetic force on the electron, we use the right-hand rule. If we extend our right hand and point the thumb in the direction of the electron's velocity, and the fingers in the direction of the magnetic field due to the current, then the palm points in the direction of the magnetic force experienced by the electron. In this case, the palm of our hand points down, so the direction of the magnetic force is down. Therefore, the direction of the electric field that cancels out the magnetic force must be up. Therefore, the direction of the electric field is O towards the wire.
Part E) It is not necessary to include the effects of gravity. The electron is moving too fast and is too light for the gravitational force to have a significant effect on its motion.
Part F) Justification: The electron is moving too fast and is too light for the gravitational force to have a significant effect on its motion. Therefore, the effects of gravity can be ignored.
To know more about acceleration, refer
https://brainly.com/question/460763
#SPJ11
Measurement
Value (in degrees)
Angle of incidence
(First surface)
37
Angle of refraction
(First surface)
25
Angle of incidence
(Second surface)
25
Angle of refraction
(Second surface)
37
Critical Angle
40
Angle of minimum
Deviation (narrow end)
30
Angle of prism
(Narrow end)
45
Angle of minimum
Deviation (wide end)
45
Angle of prism (wide end)
60
CALCULATION AND ANALYSIS
1. Measure the angles of incidence and refraction at both surfaces of the prism in the tracings of procedures step 2 and 3. Calculate the index of refraction for the Lucite prism from these measurements.
2. Measure the critical angle from the tracing of procedure step 4. Calculate the index of refraction for the Lucite prism from the critical angle.
3. Measure the angle of minimum deviation δm and the angle of the prism α from each tracing of procedure step 5. Calculate the index of refraction for the Lucite prism from these angles.
4. Find the average (mean) value for the index of refraction of the prism.
5. Calculate the velocity of light in the prism.
The angles of incidence and refraction at both surfaces of the prism are 1.428 and 0.7. The index of refraction using the critical angle is 1.56. The angle of minimum deviation δm and the angle of the prism for the narrow end and the wide end are 1.414 and 1.586. The index of refraction for the Lucite prism from these angles is 1.2776. The velocity of light in the prism is 2.35 × 10⁸m/s.
1) Using Snell's law: n = sin(angle of incidence) / sin(angle of refraction)
For the first surface:
n₁ = sin(37°) / sin(25°) = 1.428
For the second surface:
n₂ = sin(25°) / sin(37°) = 0.7
The angles of incidence and refraction at both surfaces of the prism are 1.428 and 0.7.
2) The index of refraction using the critical angle:
n(critical) = 1 / sin(critical angle)
n(critical) = 1 / sin(40) = 1.56
The index of refraction using the critical angle is 1.56.
3) For the narrow end:
n(narrow) = sin((angle of minimum deviation + angle of prism) / 2) / sin(angle of prism / 2)
n(narrow) = 0.707 / 0.5 = 1.414
For the wide end:
n(wide) = sin((angle of minimum deviation + angle of prism) / 2) / sin(angle of prism / 2)
n(wide) = 0.793 / 0.5 = 1.586
The angle of minimum deviation δm and the angle of the prism for the narrow end and the wide end are 1.414 and 1.586.
4) Calculation of the average index of refraction:
n(average) = (n₁ + n₂ + n(critical) + n(narrow) + n(wide)) / 5
n(average) = 1.2776
The index of refraction for the Lucite prism from these angles is 1.2776.
5) The velocity of light in a medium is given by: v = c / n
v(prism) = c / n(average)
v(prism) = 3 × 10⁸ / 1.2776 = 2.35 × 10⁸m/s.
The velocity of light in the prism is 2.35 × 10⁸m/s.
To know more bout the angle of incidence and angle of refraction:
https://brainly.com/question/30048990
#SPJ4
The angles of incidence and refraction at both surfaces of the prism are 1.428 and 0.7. The index of refraction using the critical angle is 1.56. The angle of minimum deviation δm and the angle of the prism for the narrow end and the wide end are 1.414 and 1.586. The index of refraction for the Lucite prism from these angles is 1.2776. The velocity of light in the prism is 2.35 × 10⁸m/s.
1) Using Snell's law: n = sin(angle of incidence) / sin(angle of refraction)
For the first surface:
n₁ = sin(37°) / sin(25°) = 1.428
For the second surface:
n₂ = sin(25°) / sin(37°) = 0.7
The angles of incidence and refraction at both surfaces of the prism are 1.428 and 0.7.
2) The index of refraction using the critical angle:
n(critical) = 1 / sin(critical angle)
n(critical) = 1 / sin(40) = 1.56
The index of refraction using the critical angle is 1.56.
3) For the narrow end:
n(narrow) = sin((angle of minimum deviation + angle of prism) / 2) / sin(angle of prism / 2)
n(narrow) = 0.707 / 0.5 = 1.414
For the wide end:
n(wide) = sin((angle of minimum deviation + angle of prism) / 2) / sin(angle of prism / 2)
n(wide) = 0.793 / 0.5 = 1.586
The angle of minimum deviation δm and the angle of the prism for the narrow end and the wide end are 1.414 and 1.586.
4) Calculation of the average index of refraction:
n(average) = (n₁ + n₂ + n(critical) + n(narrow) + n(wide)) / 5
n(average) = 1.2776
The index of refraction for the Lucite prism from these angles is 1.2776.
5) The velocity of light in a medium is given by: v = c / n
v(prism) = c / n(average)
v(prism) = 3 × 10⁸ / 1.2776 = 2.35 × 10⁸m/s.
The velocity of light in the prism is 2.35 × 10⁸m/s.
Learn more bout the angle of incidence and refraction:
brainly.com/question/30048990
#SPJ11
A spherical mirror is to be used to form an image 5.90 times the size of an object on a screen located 4.40 m from the object. (a) Is the mirror required concave or convex? concave convex (b) What is the required radius of curvature of the mirror? m (c) Where should the mirror be positioned relative to the object? m from the object
The mirror required is concave. The radius of curvature of the mirror is -1.1 m. The mirror should be positioned at a distance of 0.7458 m from the object.
Given,
Image height (hᵢ) = 5.9 times the object height (h₀)
Screen distance (s) = 4.40 m
Let us solve each part of the question :
Is the mirror required concave or convex? We know that the magnification (M) for a spherical mirror is given by: Magnification,
M = - (Image height / Object height)
Also, the image is real when the magnification (M) is negative. So, we can write:
M = -5.9
[Given]Since, M is negative, the image is real. Thus, we require a concave mirror to form a real image.
What is the required radius of curvature of the mirror? We know that the focal length (f) for a spherical mirror is related to its radius of curvature (R) as:
Focal length, f = R/2
Also, for an object at a distance of p from the mirror, the mirror formula is given by:
1/p + 1/q = 1/f
Where, q = Image distance So, for the real image:
q = s = 4.4 m
Substituting the values in the mirror formula, we get:
1/p + 1/4.4 = 1/f…(i)
Also, from the magnification formula:
M = -q/p
Substituting the values, we get:
-5.9 = -4.4/p
So, the object distance is: p = 0.7458 m
Substituting this value in equation (i), we get:
1/0.7458 + 1/4.4 = 1/f
Solving further, we get:
f = -0.567 m
Since the focal length is negative, the mirror is a concave mirror.
Therefore, the radius of curvature of the mirror is:
R = 2f
R = 2 x (-0.567) m
R = -1.13 m
R ≈ -1.1 m
Where should the mirror be positioned relative to the object? We know that the object distance (p) is given by:
p = -q/M Substituting the given values, we get:
p = -4.4 / 5.9
p = -0.7458 m
We know that the mirror is to be placed between the object and its focus. So, the mirror should be positioned at a distance of 0.7458 m from the object.
Thus, it can be concluded that the required radius of curvature of the concave mirror is -1.1 m. The concave mirror is to be positioned at a distance of 0.7458 m from the object.
to know more about mirror visit:
brainly.com/question/1160148
#SPJ11
Light traveling through air strikes the boundary of some transparent material. The incident light is at an angle of 14 degrees, relative to the normal. The angle of refraction is 25 degrees relative to the normal. (nair is about 1.00) (a) (5 points) Draw a clear physics diagram showing each part of the problem. (b) (5 points) What is the angle of reflection? (c) (5 points) What is the index of refraction of the transparent material? (d) (5 points) What is the critical angle for this material and air? (e) (5 points) What is Brewster's angle for this material and air?
b) The angle of incidence is equal to the angle of reflection, angle of reflection = angle of incidence= 14 degrees.
c) The index of refraction of the transparent material is 1.46.
d) The critical angle for this material and air is 90 degrees.
e) The Brewster's angle for this material and air is 56 degrees.
(b) Angle of reflection:
As we know that the angle of incidence is equal to the angle of reflection, thus;angle of reflection = angle of incidence= 14 degrees.
(c) Index of refraction:
The formula to calculate the index of refraction is given by:n1 sin θ1 = n2 sin θ2Where n1 = index of refraction of air θ1 = angle of incidence n2 = index of refraction of the material θ2 = angle of refractionSubstituting the given values in the above formula, we get:n1 sin θ1 = n2 sin θ2n1 = 1.00θ1 = 14 degreesn2 = ?θ2 = 25 degreesSubstituting the values, we get:1.00 x sin 14 = n2 x sin 25n2 = (1.00 x sin 14) / sin 25n2 ≈ 1.46Therefore, the index of refraction of the transparent material is 1.46.
(d) Critical angle:
The formula to calculate the critical angle is given by:n1 sin C = n2 sin 90Where C is the critical angle.Substituting the given values in the above formula, we get:1.00 x sin C = 1.46 x sin 90sin C = (1.46 x sin 90) / 1.00sin C ≈ 1.00C ≈ sin⁻¹1.00C = 90 degreesTherefore, the critical angle for this material and air is 90 degrees.
(e) Brewster's angle:
The formula to calculate the Brewster's angle is given by:tan iB = nWhere iB is the Brewster's angle.Substituting the given values in the above formula, we get:tan iB = 1.46iB ≈ tan⁻¹1.46iB ≈ 56 degreesTherefore, the Brewster's angle for this material and air is 56 degrees.
To learn more about Angle of reflection
https://brainly.com/question/16868945
#SPJ11
Two converging lenses with the same focal length of 10 cm are 40 cm apart. If an object is located 15 cm from one of the lenses, find the distance from the final image of the object. a. 0 cm b. 10 cm c. 5 cm d. 15 cm
The image of the object will form at a distance of 10 cm from the second lens, which is answer (b).
When two converging lenses with the same focal length are 40 cm apart and an object is located 15 cm from one of the lenses, we can find the distance from the final image of the object by using the lens formula. The lens formula states that 1/v - 1/u = 1/f, where v is the distance of the image from the lens, u is the distance of the object from the lens, and f is the focal length of the lens.
Using this formula for the first lens, we get:
1/v - 1/15 = 1/10
Solving for v, we get v = 30 cm.
Using the same formula for the second lens, with the object now located at 30 cm, we get:
1/v - 1/30 = 1/10
Solving for v, we get v = 10 cm.
Therefore, the image of the object will form at a distance of 10 cm from the second lens, which is answer (b).
Learn more about converging lenses:
https://brainly.com/question/32686153
#SPJ11
The width of the elements of a linear phased array are usually
____ to _____ the wavelength.
The width of the elements of a linear phased array is usually a fraction to a few times the wavelength. This range is determined by the desired performance and design considerations of the array system.
In a linear phased array, multiple individuals radiating elements are combined to form a coherent beam of electromagnetic radiation. Each element contributes to the overall radiation pattern of the array. The width of the elements plays a crucial role in determining the spatial distribution of the radiated energy.
If the width of the elements is much smaller than the wavelength, the array exhibits narrow beamwidth and high directivity. This configuration is often desired for applications that require focused and precise radiation, such as radar systems or wireless communication systems with long-range coverage. On the other hand, if the element width approaches or exceeds the wavelength, the array tends to have wider beamwidth and lower directivity. This configuration may be suitable for applications that require broader coverage or shorter-range communication.
The choice of element width also affects the sidelobe levels of the array. Sidelobes are unwanted lobes of radiation that occur off the main beam axis. By adjusting the width of the elements relative to the wavelength, the array designer can control the sidelobe levels to minimize interference and improve the overall performance of the array system.
To know more about the wavelength visit:
https://brainly.com/question/8226131
#SPJ11
A 0.5 kg book is on a level table. You apply a force, downwards and to the right at 20
degrees as shown, on the book. The coefficient of static friction between the book and the
table is 0.2 and the coefficient of kinetic friction is 0.1. What is the maximum force (in
Newtons) that you can push with at this angle before the book begins to move?
The maximum force that can be applied before the book starts to move is 1.026 N. As we can see in the figure above, the 0.5 kg book is on a level table and a force F is being applied at an angle of 20 degrees down and to the right of the book. We need to calculate the maximum force that can be applied before the book starts to move.
The first thing to do is to resolve the force F into its components. The force F has two components: one along the x-axis and the other along the y-axis. The force along the x-axis will be equal to Fcos20 and the force along the y-axis will be equal to Fsin20.The force along the y-axis does not affect the book because the book is not moving in that direction. Therefore, we will focus on the force along the x-axis. Now, the force along the x-axis is acting against the static frictional force.
Therefore, the force required to overcome the static frictional force will be given by F_s = μ_sN where μ_s is the coefficient of static friction and N is the normal force acting on the book.
N = mg, where m is the mass of the book and g is the acceleration due to gravity.
Therefore, N = 0.5 kg x 9.81 m/s²
= 4.905 N.F_s
= μ_sN
= 0.2 x 4.905 N
= 0.981 N.
Now, the force along the x-axis is given by Fcos20. Therefore, we can say:
Fcos20 - F_s = 0
This is because the force along the x-axis must be equal to the force required to overcome the static frictional force for the book to start moving.
Therefore, we can say:
Fcos20 = F_s = 0.981 N
Now, we can solve for F:F = 0.981 N/cos20 = 1.026 N (rounded to three significant figures)Therefore,
To know more about force visit:-
https://brainly.com/question/13191643
#SPJ11
