A chemist dilutes a 1. 0 mL sample of 2. 0 M KNO3 by adding water to it. If the concentration of the solution that is obtained is 0. 0080 M, what is its volume? Use M subscript i V subscript i equals M subscript f V subscript f. 125 mL 250 mL 500 mL 2,000 mL.

Answers

Answer 1

Answer:

We know the initial volume of the potassium nitrate solution is 1.0 mL and the initial concentration is 2.0 M, we also know that an unknown volume of water was added to the solution, which diluted our concentration down to a final value of 0.008 M. We are trying to find the final volume.

Here we can use this formula since the initial and final solutions are proportional. Before that let's define our variables.

[tex]M_1 = 2.0 M\\V_1 = \frac{1.0 mL}{1000} = 0.001 L\\M_2 = 0.008 M\\V_2 = \ ?[/tex]

[tex]M_{1}V_{1} =M_2 V_2\\[/tex]

[tex](2.0)(0.001) = (0.008)V_2\\\\\frac{(2.0)(0.001)}{0.008} = V_2\\\\V_2 = 0.25 L \ or \ (0.25 \ * \ 1000) = 250 \ mL[/tex]

Therefore you would have 0.25 L or 250 mL of your final solution.


Related Questions

Explain how wind and water can create a sand dune along an ocean beach

Answers

Answer: A dune is a mound of sand formed by the wind, usually along the beach or in a desert.  Dunes can also be formed by strong currents beneath the water.

Which compound contains both sigma and pi bonds? HCCl3 H2CO H2S HBr.

Answers

The compound that contains both sigma and pi bonds has been [tex]\rm \bold{H_2CO}[/tex]. Thus, option B is correct.

The compounds have been resulted by the sharing of the valence electrons between atoms, for the completion of octet of each elements.

The bonds can be saturated with the presence of only sigma bond. The unsaturated bonds has presence of pi bonds as well. The bond with one pi and one sigma has been a double bond, while 1 sigma and 2 pi has been a triple bond.

The bonds present in the following structures has been:

[tex]\rm HCCl_3=4\;\sigma\;bonds\\H_2CO=2\;\sigma,\;1\;\pi\;bond\\H_2S=2\;\sigma\;bonds\\HBr\;=1\;\sigma\;bond[/tex]

The compound with the presence of both sigma and pi bonds has been [tex]\rm \bold{H_2CO}[/tex]. Thus, option B is correct.

For more information about the sigma and pi bonds, refer to the link:

https://brainly.com/question/14018074

Aspirin (C9H8O4) is produced from salicylic acid (C7H6O3) and acetic anhydride (C4H6O3):

C7H6O3 + C4H6O3 -----> C9H8O4 + HC2H3O2

(a) How much salicylic acid is required to produce 1.5 x 10^2 kg of aspirin, assuming that all of the salicylic acid is converted to aspirin? (b) How much salicylic acid would be required if only 80% of the salicylic acid is converted to aspirin? (c) What is the theoretical yield of aspirin of 185 kg of salicylic acid is allowed to react with 125 kg of acetic anhydride? (d) If the situation described in part (c) produces 182 kg of aspirin, what is the percentage yield?

Answers

Explanation:

the equation is yes a the line of jointing line passing the ball to is

How do I convert the ones circled in red? Please explain how you did it don’t just do it for me.

Answers

Answer:

25 centigrams is equal to 2.5 grams.

150 hectometers are 10,000 centimeters.

Explanation:

10 centigrams is equal to 0.1 gram.

25 / 10 = 2.5

1 hectometer is equal to 10,000 centimeters.

150 x 10,0000 = 1500000

What does an atom's period tell us?
Select one:
a. Number of protons

b. Number of shells

c. Number of valence
electrons

d. Number of electron

Answers

Question;What does an atom's period tell us? Answer:

•A Number of protons

When drawing an atom, we draw the same number of electrons as
protons


Select one:

True

False


Answers

Answer:

true

I hope it helps.

metallic bonding in a group three metal

Answers

Answer: In a pure metal, there are atoms that are surrounded by free moving valence electrons in which they move from one part of metal to another part . There for we can conclude that pure metals are held together by things called metallic bonds and due to attraction between the mobile valence electrons and the positively charged metal ions.

Explanation:

The ability to be drawn into thin sheet is called malleability. The ability to be drawn into thin wires is called ductility. Therefore, the metallic bonds is between metals and metals.

What is metallic bonding?

Metallic bonding is a type of chemical bonding that rises from the electrostatic attractive force between conduction electrons and positively charged metal ions.

Covalent bonds are not strong bond. They can not have malleability and ductility. Ionic bonds are very strong bond. These are too not malleable or ductile. Lewis structure is used to show valence electron of every element in a molecule so, it has nothing to do with malleability and ductility. Due to metallic bonding, there is high melting and boiling point.

Therefore, the metallic bonds is between metals and metals.

To know more about metallic bonding, here:

https://brainly.com/question/11752090

#SPJ2

In a covalent bond between identical atoms, the electrons are shared between the atoms. If the atoms are not identical, the electron distribution is so that the electrons are closer to one atom than the other. This type of bond is called a(n) covalent bond.

Answers

Answer:

If the atoms are not identical, the electron distribution is electrons are closer to one atom than the other. This type of bond is called a(n) covalent bond.

Explanation:

The heating system on the second floor is being fixed Dr Kline explained Please bring these extra blankets up there for the patience

Answers

Whats the question??

1. Explain the difference between genetic, environmental, social, and pathogenic factors.


2. How do pathogens spread?


3. How can we, as humans, prevent transmission of pathogens?


4. List three ways the environment can affect personal health.

Answers

Answer:They can be spread through skin contact, bodily fluids, airborne particles, contact with feces, and touching a surface touched by an infected person.

Immunise against infectious diseases.

Wash and dry your hands regularly and well.

Stay at home if you are sick.

Cover coughs and sneezes.

Clean surfaces regularly.

Ventilate your home.

Prepare food safely.

Practise safe sex.

Explanation:

______________ is a durable material and is widely used for casting, which is a process by which the melted material is poured into a mold. A. Bronze c. Copper b. Silver d. Gold Please select the best answer from the choices provided A B C D.

Answers

The material that has been widely used in casting has been copper. Thus, option C is correct.

Casting has been the process of molding the liquid into a specific shape with the mold. The casting involves the heating of elements and converting them into liquid. The liquid has been poured into the mold and cooling results in the casted material.

The casted material has been selected based on the boiling temperature, cooling temperature, resistivity, cost-effectiveness, and damping ability.

The material that has been consisted of these characteristics has been copper. Thus, copper has been commonly used for casting. Thus, option C is correct.

For more information about casting, refer to the link:

https://brainly.com/question/1253405

Which type of mixture can be separated using a sieve?

A homogeneous mixture with components of varying sizes
A homogeneous mixture with components of the same size
A heterogeneous mixture with components of the same size
A heterogeneous mixture with components of varying sizes

Answers

Answer:

D: a heterogeneous mixture with components of varying sizes

Heterogeneous mixture is a combination of substances that doesn't have uniform composition and properties. Just by looking at the mixture you can differentiate the compounds because they are so different. Using a sieve, allows the components with different sizes to separate, while one is retained, the others can pass the holes in the sieve.

Explanation:

Answer: D, a heterogeneous mixture with components of varying sizes.

Heterogeneous mixture is a combination of substances that doesn't have uniform composition and properties. Just by looking at the mixture you can differentiate the compounds because they are so different. Using a sieve, allows the components with different sizes to separate, while one is retained, the others can pass the holes in the sieve.

Hello! Everyone:) I was just wondering if you can help me with my test.

Points: 99

Answers

Answer:

By their properties ;)

Explanation:

[tex]\Large \boxed{\sf by \ their \ properties}[/tex]

Every element has a set of particular characteristics. Each has a unique atomic and mass number because they contain a different ratio of protons and neutrons. The number of protons in an element mirrors the element's atomic number. The mass number equals the sum of the element's protons and neutrons.

According to increasing atomic numbers, chemical elements get organized. Periods and groups are the names of the horizontal rows and vertical columns, respectively. The chemical characteristics of elements within the same group are comparable due to their similar valency and number of outer electrons.

4. How are isotopes of the same element different? Select all that apply.
[]They have different masses.
[]They have different numbers of electrons.
[]They have different numbers of neutrons.
[]They have different numbers of protons.

Answers

[tex]\huge \bf༆ Answer ༄[/tex]

The Correct choice is ~ A

Isotopes are the elements with same Atomic Number but different masses ~

In the modern periodic table elements are arranged in order based on the number of:

Answers

Explanation: The elements in the modern periodic table are arranged in order of their atomic numbers, which is the number of protons in the nuclei of the atoms of an element. Each element has a unique atomic number.

Write out a correctly formatted hypothesis that describes how the amount of hydrogen gas produced with be affected by the concentration of acid.

Answers

When creating mixture the amount of hydrogen gas is directly related to the concentration of the acid mixture, the higher the concentration level The more hydrogen gas would be produced.

To solve such this we must know the concept of acid and base reaction. Therefore, the concentration of acid decides the concentration of hydrogen gas evolved.

What is chemical reaction?

Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, double displacement reaction.

When creating mixture the amount of hydrogen gas is directly related to the concentration of the acid mixture, the higher the concentration level The more hydrogen gas would be produced.

Therefore, the concentration of acid decides the concentration of hydrogen gas evolved.

Learn more about the chemical reactions, here:

https://brainly.com/question/3461108

#SPJ2

Calculate the empirical formula for acetaminophen(Tylenol)

Answers

The empirical formula of acetaminophen (Tylenol) is C8H9NO2.

Zn + 2HCl —> ZnCl2 + H2
If you have 6.8 moles of zinc chloride produced, how many moles of zinc reacted?

Answers

Answer:

about 4 or 4.8

Explanation:

mixing calcium chlorine with water is a chemical or physical change?​

Answers

Answer:

Physical Change

Explanation:

the valence electrons of metals jump easily to a higher energy orbital when light shines on them then they all fall emiting the excess energy as light which property of metals is explained by this?​

Answers

Answer:

Lustrous

Explanation:

Metals are lustrous which gives them a property of having Shiny surfaces

The valence electrons of metals jump easily to a higher energy orbital when light shines on them then they all fall emitting the excess energy as light show lustrous  property of metals.

What are valence electrons?

Valence electrons are defined as a negatively charged particle that can be shared or transmitted between atoms that is found in the outermost shell of an atom. Valence electrons have a crucial role in determining how an atom will behave. The electrical configurations of elements can be used to find valence electrons. The total number of valence electrons in that element is then determined by counting the number of electrons in the outermost shell.

When newly treated, polished, or broken, a material takes on a bright look and conducts electricity and heat reasonably well. Metals are typically ductile and malleable. These traits are the result of the metallic bond that connects the atoms or molecules of the metal.

Thus, the valence electrons of metals jump easily to a higher energy orbital when light shines on them then they all fall emitting the excess energy as light show lustrous  property of metals.

To learn more about valence electrons, refer to the link below:

https://brainly.com/question/13993867

#SPJ2

(BRAINLIEST AND 50 POINTS) no links
Name one organ system that isn't the Nervous system, Respiratory system, Skeletal system, and Circulatory system, and explain how can that system help keep you safe during a forest fire.

Answers

Answer:

Endocrine system

Explanation:

Endocrine system influences the function of the body's hormones via internal glands that are secreted into the circulatory system.

in a forest fire, your endocrine system would trigger the release of  adrenaline which is the fight or flight hormone. it would affect your heart rate, metabolism, oxygen intake, and blood flow allowing you to move quicker and escape the fire


• If the distance between Earth and the Moon decreased by half, how would it affect the
weight of a person on Earth?

Answers

Answer:

look at the explanation

Explanation:

Tides would be much higher also A lunar month would be about 10 days rather than 29 days, so the phases of the moon would go much quicker.

What is one way humans can control landfills?
(25 Points)
They can throw away less garbage.
They can throw away more garbage.
They can pollute the land.
None of the above.

Answers

none of the above is the answer i think?!

Answer:

none of the above

Explanation:

if we threw away less garbage it would just end up polluting somewhere else

if we threw away more garbage it would just add to the landfills

and if we pollute the land any more than we already have there's no point in even trying

therefore the most logical answer would b none of the above

What are electron Subshells?

Answers

Answer:

a subshell is a subdivision of electron shells that are separated by electron orbitals.

Explanation:

(subshells are labeled s,p,d, and f in an electron configuration)


c) A substance has a high melting point and conducts electricity. What type of structure does it have

Answers

Answer:

Metallic structure

Explanation:

They have a high melting point due to the strong forces of attraction between the positive ions (cations) and the delocalised electrons. Moreover, they conduct electricity due to the sea of delocalised electrons.

[Extra: It could be an ionic compound since they also have a high melting point, however they only conduct electricity in liquid or aqeouus state.]

The clouds of Venus consist mainly of ______. Group of answer choices carbon monoxide droplets of water vapor hydrogen and helium droplets of sulfuric acid gaseous nitrogen

Answers

Answer:

droplets of sulfuric acid

Explanation:

What is an example of thermal energy

A) batteries moving a toy
B) riding a bicycle
C) plugging in a tv
D) using an oven to cook

Answers

D because your using heat I’m guessing

I need help with stoichiometry

Answers

Um I don’t know what stoichiometry is. So I can’t help I am sorry wish I could

Answer the following;
Pls helppp

Answers

Answer:

The answer is A

Explanation:

Answer:

D)All of the above

WILL GIVE BRAINLIEST


Which model provides more information-a chemical formula or a sketch of the molecule

like in the structural formula? Explain your reasoning.

Answers

Answer:

Explanation

:Both b/c a chemical formula tells you how many and a sketch formula shows how they are bonded together.

Molecular formulas show how many atoms of each element one molecule of a compound contains. Note: Ionic compounds are generally crystalline solids with high melting points. Other compounds, however, have very different properties.

Other Questions
geometry - please helpsolve for x & y Use the story below fill I the questions. A) Origin and developmentB) EarthC) LifeD) Early technologies how should a family protect child rights You illuminate the surface of some metal with green laser and observe the photocurrent. If you decrease the intensity of laser, the stopping potential will A large tank of fish from a hatchery is being delivered to a lake. The hatchery claims that the mean length of fish in the tank is 15 inches, and the standard deviation is 3 inches. A random sample of 41 fish is taken from the tank. Let x be the mean sample length of these fish. What is the probability that x is within 0.5 inch of the claimed population mean? (Round your answer to four decimal places.) If angle CAB= x+40, angle ACB=3x+10, angle CBD= 6x, what is angle CAB 1. 81 1/2 x 27 1/3 2. 32x = 729 Helpppp me please omg discuss the criteria of a good test Your bill at a restaurant is $68 and you want to leave a %20 tip what is the total amount you will leave Using the picture below, which angle is alternate exterior to angle 2? can someone teach me how to do this? what percentage of teen social media users report observing cyberbullying online? RAM or RIM is correct? Answer all questions please and be quick, its very URGENTU will get BRAINLY Write a thesis related to the following question:Should people be accountable for life or death situations? guys does 9+10= 21 explain please What is the empirical formula for C2H4S2? How does our use of energy today affect the future?ILL GIVE BRAINLY Conflict is normal in all enduring relationships.a. Trueb. False