The inductance of the inductor is 169Ω and the energy in the inductor is 1.48 x 10⁻³ J.
The resistance of the resistor is 13.7K and the ideal battery has EMF 73.0 V. So, the initial current in the circuit will be,
I = 73/13700
I = 5.3 mA.
The current reaches 2.95 mA after 5.46 mA.
(a). The inductance in the coil can be given by,
E = LΔI/Δt
L is the inductance and E is the EMF, So, Putting values,
73 = L(2.35)/5.46
L = 169Ω.
(b) The energy in the inductor when current is 2.95 mA,
E = 1/2LI²
Putting values,
E = 1/2 x 169 x 2.95 x 2.95 x 10⁻⁶
E = 1.48 x 10⁻³ J.
So, energy in the inductor is 1.48 x 10⁻³ J.
To know more about Inductor, visit,
https://brainly.com/question/4425414
#SPJ4
f the planet were orbiting a star twice as massive as our sun but still taking 3.862 years to orbit, how far would it be from its host star?
Distance-Related Data the distance between us and Proxima Centauri, the star closest to us, is still 40,208,000,000,000 km. Or around 268,770 AU.
Explain about the planet were orbiting a star?Exoplanets are planets that revolve around other stars. In our solar system, every planet revolves around the Sun. Exoplanets are extremely difficult to directly observe using telescopes.
One particular planetary system a star with planets surrounding it—is our solar system. Although there are more than 3,200 other stars in our galaxy with planets around them, our solar system is the only one that is formally referred to as a "solar system."
Surprisingly, our simulations reveal that a planet does not rapidly disintegrate inside of a red giant star or even modify its orbit—in certain situations, a planet continues to circle below a red giant star's photosphere for thousands or even millions of years.
To learn more about planet were orbiting a star refer to:
https://brainly.com/question/14545297
#SPJ4
A 3.1 x 1023 kg object and a 7.3 x 105 kg object are orbiting each other in deep space. If these two objects are 4.3 x 1010 meters apart, what is the magnitude of their gravitational force?
The gravitational force on the object of masses 3.1×10²³ kg and 7.3×10⁵ kg respectively is 8.16×10⁻³ N.
What is gravitational force?Gravitational force is the most prevalent force in the universe, pulling together on any two objects with mass in the universe.
To calculate the magnitude of the gravitational force, we use the formula below.
Formula:
F = GmM/r²............... Equation 1Where:
F = Gravitational forcem = Mass of the first objectM = Mass of the second objectr = Distance between the objectsG = Universal constant.From the question,
Given:
m = 3.1×10²³ kgM = 7.3×10⁵ kgG = 6.67×10⁻¹¹ Nm²/kg²r = 4.3×10¹⁰ mSubstitute these values into equation 1
F = (3.1×10²³× 7.3×10⁵×6.67×10⁻¹¹)/(4.3×10¹⁰ )²F = 8.16×10⁻³ NHence, the gravitational force is 8.16×10⁻³ N.
Learn more about gravitational force here: https://brainly.com/question/19050897
#SPJ1
What percentage of the final current I0 flows through an inductor L in series with a resistor R , three time constants after the circuit is completed?
The required percentage of the final current that flows is 95 %.
The percentage of the final current flows through an inductor Using the decay of current in the RL circuit,
[tex]I = I_{0} ( 1 - e^{\frac{-l}{r} } )[/tex]
It is given that an inductor L in series with a resistor R
So, l = 3r
Then,
[tex]I = I_{0} ( 1 - e^{\frac{-3r}{r} } )\\\\I = I_{0} ( 1 - e^{-3 } )[/tex]
Now,
[tex]I = I_{0} ( 1 - e^{-3 } )\\\\ I = I_{0} ( 1 - 0.04978 } )\\\\I =I_{0} *0.95[/tex]
So,
[tex]\frac{I}{I_{0} }*100 = 95 %[/tex]
Hence, The required percentage of the final current that flows is 95 %.
A force perpendicular to the charge's own velocity and the magnetic field acts on it when the charge is travelling through a magnetic field.
The magnetic influence on moving electric charges, electric currents, and magnetic materials is described by a magnetic field, which is a vector field.
To read more about the current, visit https://brainly.com/question/2264542
#SPJ4
Part Description Answer The two main categories of pipes we examine for our physics of sound study are Save 1. straight pipes with red waves and straight pipes with blue waves a pipe with both ends open, and a pipe with one end closed a pipe with pressure and a pipe with displacement a pipe with no openings and pipe with many openings 5.56 pts. 100% 10% try penalty Hints: Q,0 You have an open pipe and closed pipe of the same length: Which will have the higher (fundamental frequency 5.56 pts.100% 33% try penalty 1. open pipe 2. closed pipe 3. they will have the same frequency Hints: 0,0 What is the harmonic n = 3 of an open-open pipe 9 m in length? (include units with answer) 5.56 pts.100% Format Check 2% try penalty Bonus hint Hints: 1,0 What is the harmonic n = 3 of an closed-open pipe 9 m in (length? (include units with answer) 5.56 pts. 100% Format Check 2% try penalty Bonus hint Hints: 0,0
Examining the types of Organ Pipes, we evaluate,
A) 2) A pipe with both ends open, and a pipe with one end closed
The first pipe is called an open pipe and the second pipe is called a closed pipe
B) 1) open pipe
If L is the length of the pipes,
fundamental frequency of open pipe, f(open)= v/(2*L)
fundamental frequency of closed pipe, f(closed)= v/(4*L)
clearly, f(open) = 2*f(closed)
C) 5th harmonic of open pipe, f5 = 5*v/(2*L) = 5*343/(2*2) = 429 Hz
D) 5th harmonic of closed pipe, f5 = 5*v/(4*L) = 5*343/(4*2) = 214 Hz
To read more about organ pipes, visit https://brainly.com/question/24188759
#SPJ4
Consider a lamina occupying the region R and having the density function rho: R is the rectangular region with vertices (0, 0), (0, 3), (8, 3). rho(x, y) = ((xy)^(1/2)).
a) Find the moments of inertia Ix, Iy, and I0 about the x-axis, y-axis, and origin, respectively.
b) Find the radii of gyration with respect to the x-axis, y-axis, and origin, respectively.
There are specified boundary conditions.y = root of x – 1 – y = 3 – x – y = 0, and y = 0 when x is subtracted from the answer.
Find the moments of inertia ?
We must determine how much the area of rwill be now that we have the figure. Using integration, we will obtain the d l of r, whose area is equal to the integration of the 122 root of our x minus 1 dx plus the integration of limit 2233 minus x Dx. From here, we can write that 2 divided by 3 multiply x, minus 1 whole to the power 3 divided by 2 limit 1 to 2 plus 3 x minus x, squared y = root of x – 1 – y = 3 – x – y = 0, and y = 0 when x is subtracted from the answer.To learn more about boundary conditions refer
https://brainly.com/question/14040033
#SPJ4
A corgi dog has a mass of 10 kg and is running at you with a velocity of 5 m/s. What is the momentum of the dog?.
The momentum of the dog will be 50Kgm/s.
What is Momentum?Momentum is the product of the mass of a body and its velocity. Momentum is a vector quantity meaning it has both magnitude and direction.
From Isaac Newton’s second law of motion which states that the time rate of change of momentum is equal to the force acting on the body.
Also, according to Newton’s third law, when a force is applied on a body there is an equal and opposite reaction, so any change in the momentum of one body is balanced by an equal and opposite change of the momentum of another body. So, in the absence of any external force acting on a collection of bodies, their total momentum never changes; this is the law of conservation of momentum.
Momentum, p = mass (m) x velocity (v)
where m = 10kg
v = 5m/s
p = 10 x 5
p = 50kgm/s.
Learn more about momentum:https://brainly.com/question/1042017
#SPJ1
a fluid enters a pipe and at the end of the pipe is a diverging nozzle. the diverging nozzle exhausts to the atmosphere. the fluid has properties of c p
The Bernoulli Principle causes pressure to fall in a converging nozzle.
the properties of the fluid was changed to the following conditions they are the change in density, energy, mass.
what was nozzle mean ?
A nozzle is a spout on the end of a hose or pipe that is used to regulate the flow of a fluid such as water or air. A convergent nozzle is one that begins large and gradually becomes smaller, resulting in a decrease in cross-sectional area. Due to mass conservation, a fluid must accelerate as it enters the smaller cross-section. The fluid must travel quicker to keep a consistent amount of fluid passing through the limited part of the nozzle.
The energy required to accelerate this fluid must originate from someplace. Some energy is included in the random motion of molecules, which we perceive as pressure. This random motion's energy.
To learn more about energy follow the given link: https://brainly.com/question/2003548
#SPJ4
an object has a weight of 8.50 n when in air. however, it apparantley weighs 4.40 n when completely submerged in water
the density of the object is 0.0041 g/vol
How does density change in water and air?Water has a density of about 1 gram per milliliter, however this might vary depending on temperature or the things that are dissolved in it. Because ice is less thick than liquid water, ice cubes float in glasses of water.
Compared to a unit volume of liquid water, air has fewer molecules per volume, making it lighter.
Given two weights = 8.5 N and 4.4 N
the formula v₀ = wₐ - wₓ/ pₓg
here wₐ = weight in air
and wₓ = weight in water
Thus on substituting the value of the above mentioned dimensions we get
v₀ = 8.5 - 4.4 / 1000
v₀ = 0.0041
Thus the density of the object is 0.0041 g/vol
To know more about density you may visit the link :
https://brainly.com/question/15164682
#SPJ4
54(a) Define the capacitance of a capacitor
(b) State:
three factors on which the capacitance
a parallel plate capacitor depends.
(ii) two uses of capacitors.
(c) The plates of a parallel - plate capacitor
are 5mm apart and 2m² in area. The plates
are in vacuum. A potential difference of 1kv
is applied across the capacitor.
Calculate the:
(i)
Capacitance
(ii) charge on each plate
ii) electric intensity in the space between them
iv) energy stored in the capacitor
[NECO,2000] [Permitivity of free space.
Do=8.85x10-¹² Nm²C²1
a) The ratio of the electric charge on each conductor to the potential difference (i.e., voltage) between them is used to express capacitance.
b) The area of the plates, the spacing between them, and the type of insulating material or dielectric between them are the three variables that have an impact on a parallel-plate capacitor's capacitance.
c) The area of each plate, the dielectric material separating the plates, and the distance between the plates all affect the capacitance of a parallel plate capacitor.
What is Capacitor?An electrostatic field of energy is stored in a capacitor, a passive electrical component. A capacitor is made up of two conducting plates and an insulating substance called the dielectric in its most basic form.Farads (F), which bear the name of English physicist Michael Faraday, are the units used to measure the capacitance of a capacitor (1791–1867). There is a lot of capacitance in a farad.a capacitor is an electrical energy storage device that consists of two conductors that are isolated from one another and placed near to one another. A straightforward illustration of such a storage system is the parallel-plate capacitor.A dielectric material and two metal plates serve as the building blocks of a capacitor.To learn more about Capacitor refer to:
https://brainly.com/question/13578522
#SPJ1
amples of coarse aggregate from a stockpile are brought to the laboratory for the determination of specific gravities. the following weights are found:
The aggregate bulk dry specific gravity, the aggregate apparent specific gravity, the moisture content of stockpile aggregate and absorption are respectively,
A. 2.7
B. 2.72
C. 1.6%
D. 0.21%
A) The formula for the aggregate bulk dry specific gravity is:
Aggregate bulk dry specific gravity = Mass of oven dried aggregate /( Mass of saturated surface dry aggregates - Submerged mass of aggregate)
Placing the values from the data we have,
Aggregate bulk dry specific gravity = 5216/ (5227 - 3295) = 2.7
B) Formula for aggregate apparent specific gravity is
Mass of oven dried aggregate/ ( Mass of oven dried aggregate - Submerged mass of aggregate) = 5216/ (5216 - 3295) = 2.7
C) The moisture content of the stockpile aggregate is
m = (weight of moist aggregate - mass of oven dried aggregate) / (mass of oven dried aggregate* 100%)
m = (5298 - 5216)/ (5216* 100%) = 1.6 %
D) Absorption is calculated as A = (5227 - 5216) / (5216) * 100% = 0.21 %
To know more about aggregates:
https://brainly.com/question/16380585
#SPJ4
What is the bug's speed at the end of this displacement? assume that the speed is due entirely to the wind.
The work done by the wind is 90 × [tex] {10}^{-2} [/tex] Joules and the bug's speed at the end of this displacement is 6.32 m/s.
The bug's speed can be calculated by the formula -
Work = Force × displacement
Keep the values in formula to find the work done -
W = (4i - 6j) × [tex] {10}^{-2} [/tex] × (9i - 9j)
Performing multiplication on Right Hand Side of the equation -
W = (36 + 54) × [tex] {10}^{-2} [/tex]
Performing addition on Right Hand Side of the equation
W = 90 × [tex] {10}^{-2} [/tex] Joules
The bug's speed at the end is -
W = 1/2mv²
As 1000 gram = 1 kg
So, 45 gram = 45 × [tex] {10}^{-3} [/tex] grams
90 × [tex] {10}^{-2} [/tex] = 1/2 × 45 × [tex] {10}^{-3} [/tex] × v³
v² = (2 × 90 × [tex] {10}^{-2} [/tex]) ÷ (45 × [tex] {10}^{-3} [/tex])
v² = (180 × 10) ÷ 45
v² = 1800/45
v² = 40
v = ✓40
v = 6.32 m/s.
Hence, the work done is 90 × [tex] {10}^{-2} [/tex] Joules and bug's speed is 6.32 m/s.
Learn more about displacement -
https://brainly.com/question/321442
#SPJ4
The complete question is -
A 45 gram bug is hovering in the air. A gust of wind exerts a force (4i - 6j) × [tex] {10}^{-2} [/tex] N on the bug. How much work is done by the wind as the bug undergoes displacement 9i - 9j. What is the bug's speed at the end of this displacement? assume that the speed is due entirely to the wind.
What are 3 examples of implied powers?.
In physics, implied powers are important for understanding the behavior of matter and energy. Three examples of implied powers in physics include the conservation of energy, the conservation of momentum, and the law of gravity.
The conservation of energy is an example of an implied power in physics. This law states that energy can neither be created nor destroyed, but can be transformed from one form to another.
The conservation of momentum is another example of an implied power in physics. This law states that the momentum of a system is constant, and that it can only be changed by an external force.
The law of gravity is a third example of an implied power in physics. This law states that two objects will be attracted to each other with a force that is proportional to the product of their masses, and inversely proportional to the square of the distance between them.
Learn more about implied powers at : https://brainly.com/question/27728796
#SPJ4
Humans can produce an output power as great as 20 W/kg during extreme exercise. Sloths are not so energetic. At its maximum speed, a 4.0 kg sloth can climb a height of 6.0 m in 2.0 min.What's the specific power for this climb?Express your answer in watts per kilogram.
Answer:
below
Explanation:
Work = force x distance = PE gain = mgh = 4 kg * 9.81 m/s^2 * 6 = 235.44 j
Power = work / time ( time is in seconds)
= 235.44 / (2*60) = 1.962 watts
SPECIFIC power = 1.962 w / 4 kg = .49 w/kg
using disks or washers, find the volume of the solid obtained by rotating the region bounded by the curves y
The volume of the solid obtained by rotating the region bounded by the curves y is 76π/3.
How to calculate volume?The area between the red lines and x-axis is revolved around the blue line. We take the large disk and subtract the area of the smaller one.We can divide up the problem into two parts. The first is when y < 2. The second is when 2 < y < 4. In the first scenario, the outer radius is 3 and the inner is 1. The volume is therefore,(π*32 – π*12)*2 = 8π*2 = 16π
For the second part, The outer radius is 3 still, but the inner radius is x - 1. But since we are integrating with respect to y, we'll say y - 1. And it's evaluated from 2 to 4:
∫24 π(32 – (y-1)2) dy
= π∫24 9 – (y2 – 2y + 1) dy
= π∫24 9 – y2 + 2y – 1 dy
= π∫24 8 – y2 + 2y dy
= π[8y – (1/3)y3 + y2]24
= π{[8×4 – (1/3)43 + 42] – [8×2 – (1/3)23 + 22]}
= π{[32 – 64/3 + 16] – [16–8/3 + 4]}
= π(32 – 64/3 + 16 – 16 + 8/3 – 4)
= π(28 – 56/3)
= π(84 – 56)/3
= 28π/3
We add this to 16π from earlier to get
(48 + 28)π/3
= 76π/3
To learn more about volume, refer to
https://brainly.com/question/23963432
#SPJ4
what fraction of ice is submerged when it floats in fresh water, given the density of water at 0 oc is very close to 1000 kg/m3. density of ice is 0.917 g/cm3.
The fraction of ice submerged when it floats in fresh water is 0.9.
Given that the density of water is 1000 kg/m³ and density of ice is 0.917 gm/cm³.
Converting gm/cm³ to kg/m³ we get, 0.917 gm/cm³ = 917 kg/m³
ρ₁ = 1000 kg/m³, ρ₂ = 917 kg/m³
V₁ = volume of water displaced = xV₂, V₂ = volume of ice submerged
Archimedes principle states that, the buoyant force on the ice will be equal to the weight of the water displaced. Using this principle in the above question.
ρ₁V₁= ρ₂V₂
V₁ = ρ₂V₂/ρ₁
xV₂ = 917 V₂/1000
x = 0.9
Thus, the fraction of ice submerged in water is 0.9.
To know more about archimedes principle:
https://brainly.com/question/29342487
#SPJ4
12 1 point question at position 12 find the parallel line segments in the diagram and write a mathematical statement showing the parallel line segments.
The parallel line segments are ΔABC ~ ΔAED
Solution:
Parallel line segments: BC/ED
Similar triangles: ΔАВС ~ΔAED
Reason for Similar triangles
In ΔABC and ΔAED, we have
<A= <A (common)
m <ABC = M <AED (Corresponding Angles)
M<ACB = M<ADE (corresponding Angles)
= ΔABC ~ ΔAED
Parallel lines or parallel line segments are always them. They never meet at an equal distance from each other. edge. A table or book is a parallel segment. If a line crosses two sides of a triangle and bisects them equally, the line must be parallel to the third side of the triangle.
Parallel lines are lines that do not intersect or intersect at any point in the plane. They are always parallel and at the same distance from each other. Parallel lines are lines that do not intersect. It can be said that parallel lines meet at infinity. If the slopes are the same and the y-intercepts are different.
Learn more about Parallel lines here:-https://brainly.com/question/24607467
#SPJ4
for the composite bar of prob. 2.111, determine the residual stresses in the tempered-steel bars if p is gradually increased from zero to 98 kips and then decreased back to zero.
The load in the column has an eccentricity of 13.13 mm.
The column has a maximum stress of 78.72 MPa.
a)
P = 310 kN is the axial load that is applied to the column.
At the middle of the column, there is a ym = 9 mm deflection.
The column has an elasticity modulus of E = 200 GPA.
The column measures L= 6.5 m in length.
Consult the textbook's Appendix C, "Properties of Rolled-Steel Shapes."
Rolled-steel form for W25058;
7,420 mm2 is the cross-sectional area.
I = Iy = 18.7106 mm4 is the smallest moment of inertia on the y-axis.
R = ry = 50.3 mm is the smallest radius of gyration on the y-axis.
S = Sy = 185103 mm3 is the section's section modulus.
The column's length (L) and its effective length (Le) are equal (L).
Le = L= 6.5 m
Using the equation, determine the critical load (Pcr).
Pcr = π2EI(Le)2
The elastic modulus in this instance is E.
Change E to 200 GPa, I to 18.7 106 mm4, and Le to 6.5 m.
Pcr=π2 * 200 GPa * 109 N/m21 GPa * 18.7 * 106 mm4 * (1 m1,000 mm)
4(6.5)
2 = 873,665 N * 1 kN1,000 N = 873.665 kN
Using the equation, ascertain the load's eccentricity (e).
ym=e[sec(π2PPcr)−1]
The column's deflection in this instance is ym.
Change ym to 9 mm, P to 310 kN, and Pcr to 873.665 kN.
9 = e * [sec(π2310873.665) − 1]
e = 13.13 mm
As a result, the load's eccentricity within the column is 13.13 mm.
b)
P = 37 kN is the axial load applied to the rod.
P = 310 kN is the axial load that is applied to the column.
At the middle of the column, there is a ym = 9 mm deflection.
The column has an elasticity modulus of E = 200 GPA.
The column measures L= 6.5 m in length.
Consult the textbook's Appendix C, "Properties of Rolled-Steel Shapes."
Rolled-steel form for W25058;
7,420 mm2 is the cross-sectional area.
I = Iy = 18.7106 mm4 is the smallest moment of inertia on the y-axis.
R = ry = 50.3 mm is the smallest radius of gyration on the y-axis.
S = Sy = 185103 mm3 is the section's section modulus.
c)
The section's section modulus in this case is S.
Change I to 18.7106 mm4 and S to 185103 mm3.
c = 18.7 × 106185 × 103 = 101.08 mm
Using the equation, determine the highest tension in the column (max).
σmax = PA(1+ecr2sec(π2PPcr))
Replace P with 310 kN, A with 7,420 mm2, E with 13, C with 101.08 mm, R with 50.3 mm, and Pcr with 873.665 kN.
σmax = 310 kN×1,000 N1 kN7,420 mm2×(1 m1,000 mm)2(1+13.13×101.0850.32sec(π2310873.665))
=78.72×106 Pa×1 MPa106 Pa=78.72 MPa
Consequently, the column's maximum stress is 78.72 MPa.
To know more about Residual stress, refer to this link:
https://brainly.com/question/20309377
#SPJ4
car b is rounding the curve with a constant speed of 54 km/h, and car a is approaching car b in the intersection with a constant speed of 72 km/h. determine the velocity which car a appears to have to an observer riding in and turning with car b. the x-y axes are attached to car b. is this apparent velocity the negative of the velocity which b appears to have to a non-rotating observer in car a? the distance separating the two cars at the instant depicted is 40 m.
The velocity of car A relative to the observer of car B when the car B is not rotating is, V = ( 20i - 15j ) m/s
Velocity of car B with which it is rounding is: Vb = 54km/hr = 15m/s
velocity of car A with which it is approaching car B: Va = 72km/hr = 20m/s
Distance between the two cars, d = 40m
velocity is car A is
Va = Vb + Vb/r × d + V ( V is the velocity of car A relative to the observer of car B)
20i = 15j + 15/100k × ( -40i ) + V
20i = 15j - 6j + V
V = ( 20i - 9j ) m/s
Thus the velocity of car A relative to the observer of car B = ( 20i - 9j ) m/s
The velocity of car A relative to the observer of car B when the car B is not rotating, V = ( 20i - 15j ) m/s
As this velocity is not negative relative to the previously calculated velocity.
Thus, this apparent velocity is not negative.
learn more about relative velocity:
https://brainly.com/question/17228388
#SPJ4
TRUE/FALSE. founders' shares, a type of classified stock owned by the firm's founders, generally have more votes per share than the other classes of common stock.
A sort of categorized stock known as founders' shares is owned by the company's founders and typically has more voting rights per share than other classes of common stock.
What is founders' shares ?This is accurate since founders typically hold the earliest shares of a company, giving them a greater number of voting rights per share than other classes of common stock.The founders of the company own founders' shares, a sort of categorized stock that often has higher voting power per share than other classes of common stock.The shares given to a company's founders are referred to as founders stock.Up until a dividend is due to the holders of common stock, the stock frequently doesn't generate any income.When the shares in founders stock become exercisable is determined by the vesting schedule.To learn more about founders' shares refer
https://brainly.com/question/23881482
#SPJ4
Frequently, attention in an equilibrium situation is confined to a plane. An example would be a ladder leaning against a wall, which is in danger of slipping only in the plane perpendicular to the ground and wall. By orienting a Cartesian coordinate system so that the x and y axes are in this plane, choose which of the following sets of quantities must be zero to maintain static equilibrium in this plane.
\sum F_x and \sum \tau_z and \sum F_y
\sum F_z and \sum \tau_x and \sum \tau_y
\sum \tau_x and \sum F_x and \sum \tau_y and \sum F_y
\sum \tau_x and \sum F_x and \sum \tau_y and \sum F_y and \sum \tau_z
To preserve static equilibrium in this plane, the following sets of quantities must all be zero: ∑Fx and ∑τz and ∑Fy
We can see from the question that we must demonstrate the collection of values that must be zero in order to maintain static equilibrium on the provided plane.
As a result, we can see that the set of variables that must equal zero in order to maintain static equilibrium in the given plane is composed of Fx, Fy, and τz
This is due to the fact that a system must have all of its components' forces added together to equal zero in order for it to remain in equilibrium.
Thus, To preserve static equilibrium in this plane, the following sets of quantities must all be zero: ∑Fx and ∑τz and ∑Fy
To read more about equilibrium, visit https://brainly.com/question/12582625
#SPJ4
a battery was charged. when the charging began, it was 232323 percent full. after 303030 minutes of charging, the battery was 898989 percent full.
According to the provided statement, a power supply was charged after 2.2 minutes of charging.
What would you say is charge?Charge, also referred to as electric charge, electrostatic attraction, or electrostatic interactions and denoted by the symbol q, is a property of a unit of matter that indicates how many more or fewer particles than protons it contains.
Charge, in brief: what is it?The physical characteristic of matter that leads it to feel a force when exposed to an electromagnetic field is called electric charge. The two types of electric charges that protons and electrons most frequently carry are positive and negative charges. Charge movement is what produces energy.
To know more about charge visit:
https://brainly.com/question/11944606
#SPJ4
when charges mutually repel and distribute themselves on the surface of conductors, what becomes of the electric field inside the conductor?
The charges align themselves so that the conductor's internal field is zero.
What occurs if a charged surface is in close proximity to a conducting surface?Induced charges are created on the conductor when a charge is brought close to it. The internal free charges of the conductor, however, are gathered throughout its surface because the electric field inside the conductor must be zero in order to defeat the electric field of induced charges.
What takes place within a conductor?A substance that has a lot of free electrons accessible for the flow of current is said to be a conductor. Since there are numerous electrons, a powerful force of repulsion exists between them as well. As a result, the electrons move to lessen their attraction for one another.
To know more about conductor's visit:-
https://brainly.com/question/18084972
#SPJ4
a bungee jumper with mass 61.0 kg jumps from a high bridge. after reaching his lowest point, he oscillates up and down, hitting a low point eight more times in 40.0 s . he finally comes to rest 26.0 m below the level of the bridge. Calculate the spring stiffness constant and the unstretched length of the bungee cord.
The spring constant stiffness and the unstretched length of the bungee cord is 18.91 m
A bungee jumper mass m is = 61.0 kg
the time period is T = 40.0s / 8
= 5s
T = 2π√ (m /k )
5s = 2π √ 61.0 / k
spring constant k = 98.09 N/m
let the unstreched length is L
then the extension in the cord is x = mg / K
= 61.0 kg * 9.8 / 98.09
= 6.09 m
unstreched length of the bungee jump cord is L = 25 - 6.09 m
= 18.91 m
Learn more about spring constant here:
https://brainly.com/question/14159361
#SPJ4
a helium-neon laser emits laser light at a wavelength of 632.8 nm and a power of 2.3 mw. at what rate are photons emitted by this device?
These photons are emitted by this devices at rate 73.2 x 10¹⁴
The rate of photons emittedPhotons can be absorbed or emitted from atoms if the electrons in the atom transition from a state expressed in quantum numbers. The movement of electrons from a lower quantum state to a higher quantum state requires photons.
To determine the rate of the emitted photon, find the energy of each photon first.
Use formula:
E = hc/λ
h is Planck's constant and c is the speed of light.
h = (6.628) (10⁻³⁴) Js
c = (2.998) (10⁸) m/s
So,
E = hc/λ
= (6.626 × 10⁻³⁴) (2.9 × 10⁸) / (632.8 x 10⁻⁹)
= 3.14 x 10⁻¹⁹ J
Hence the energy emitted = 2.3 x 10⁻³
So, the rate:
= 2.3 x 10⁻³ / 3.14 x 10⁻¹⁹
= 73.2 x 10¹⁴
Learn more about photon energy here: https://brainly.com/question/29490389
#SPJ4
the number of molecular orbitals formed is equal to the number of atomic orbirtals that are combined. when two atomic orbitals are combined, one of the resulting mos is at a lower energy than the original atomic orbitals; this is a bonding orbital. the other mo is at higher energy than the original atomic orbitals; this is an antibonding orbital. molecular orbital (mo) theory treats a molecules as a collection of nuclei with mos delocalized over the entire structure. group of answer choices
The overall amount of atomic orbitals that go into creating a molecular orbital is equal to that number. Two H protons make up a chemical H2, which is.
What is the primary energy source?The sun is one of most significant energy sources. Almost all of the energy on earth comes from the sun, which is where it all began. Sunlight provides us with solar thermal energy and can also be used by solar (photovoltaic) cells to generate electricity.
Why is energy so crucial?Because it is a core human requirement, power plays a significant role in our daily lives. Our living thing constructions are not only heated by energy, but also cooled by it.
To know more about Energy visit:
https://brainly.com/question/1932868
#SPJ4
when measuring the power of a 3 phase circuit at 55 percent power factor using only 2 wattmeters, one wattmenter will read?
One of the two wattmeter will read 0.696 W in a 3 phase circuit at 55% power factor.
How do two wattmeters measure power?Two voltage readings made with reference to the same phase (line) and two currents flowing into that phase are used in the two-wattmeter approach. The three-phase system is assumed to be balanced, with the sum of all voltages equaling 0 V and the sum of all currents equaling 0 A.
What is the 3 phase power measurement's power factor?Three wattmeters are needed to calculate the overall power factor in a three-phase, four-wire system. Watts are measured by each metre, and measurements of volts and amps are also taken. By dividing the total watts from each metre by the total volt-amps, the power factor is derived.
Learn more about Wattmeter here:
brainly.com/question/854830
#SPJ4
what will happen if the s and c inputs on an active high s-c flip-flop are both high at the same time?
a cube of side length 10.0 cm and made of unknown material floats at the surface between water and oil. the oil has a density of 810 kg/m3. If the cube floats so that it is 71 % in the water and 29 % in the oil, what is the mass of the cube?What is the buoyant force of the cube?
The buoyant force of the cube is 23 / 12 gcm^-3. Upthrust, often known as buoyancy, is an upward force applied by a fluid against the weight of an object that is partially or completely submerged.
What is buoyant force ?Upthrust, often known as buoyancy, is an upward force applied by a fluid against the weight of an object that is partially or completely submerged. The weight of the fluid on top causes pressure in a fluid column to rise with depth.
Any object in water experiences a buoyant force that works against gravity, causing it to shed some of its weight. The buoyant force acting on the object will be equal to gravity and it will float if it displaces an amount of water equal to its own weight.
Let the side of metal be L.
So the of base is A = L²
Now the weight of 144 g weight will be balanced by the buoyancy force due to 1/2cm length of metal cube (p = 2gcm^-3)
So buoyancy force is F = A x L1pg=L^2 x 1/2 x 2x10
L = 12cm
This force is equal to weight of 144gm.
so, L² x 1/2 x 2 x 10 = 144 x 10
L = 12 cm
when no weight was placed the 1/2 cm was above the liquid.
so total length under weight was L - 1/2 = 23/ 2 cm
weight of block = buoyancy force
pmetal x L³ x g = p x L² x 23/2 x g
pmetal = 23 / 12 gcm^-3
To learn more about buoyant force refer :
https://brainly.com/question/21990136
#SPJ4
how fast, in rpm , would a 5.8 kg , 20- cm -diameter bowling ball have to spin to have an angular momentum of 0.26 kgm2/s ?
Angular speed is the speed of the object which determines how fast any object can rotate. It has both direction and magnitude and so is the vector quantity.
Given that:
Angular momentum (L) = 0.26
Diameter = 20cm = 0.2 cm
Radius, r = (d/2) = 0.1m
Mass = 5.8 kg
Moment of inertia (I) = 2mr² / 5
I = (2 * 5.8 * 0.1^2) / 5
= 0.116
= 0.116 / 5
= 0.023 kgm²
Angular speed (w) ;
w = L / I
w = 0.26 / 0.023
= 11.30
= 11.3 rad/s
w = (11.3 * 60/2π)
w = 1064.9
Angular speed = 1064.9 rpm
= 1065 rpm
Therefore the angular speed is 1065 rpm.
To know more about angular speed, refer: https://brainly.com/question/7552487
#SPJ4
shown following are several times in the history of the universe. imagine that you were able to watch a single photon that has been part of the cosmic microwave background since it first became present in the universe. rank these times from left to right based on the wavelength this photon would have at each time, from shortest to longest. 100 million years after the Big Bang
1.5 billion years after the Big Bang
1 million years after the Big Bang
500,000 years after the Big Bang
today
The rank of these times from left to right based on the wavelength of this photon would have at each time, from shortest to longest are:
500,000 years after the Big Bang. 1 million years after the Big Bang.100 million years after the Big Bang. 1.5 billion years after the Big Bang. Today.What are photon wavelength and frequency?There is a wavelength and a frequency for every photon. The distance between two electric field peaks with the same vector is known as the wavelength. The number of wavelengths a photon travels through each second is what is known as its frequency. A photon cannot truly have a color, unlike an EM wave.
Therefore, In the standard model of particle physics, the photon is a fundamental particle. It has no discernible wavelength. The table describes it as a point particle with mass 0 and spin 1.
Learn more about wavelength from
https://brainly.com/question/19385998
#SPJ1
