Answer:
Requirement A: CAP Rate is 12.5%
Requirement B: Capitalized Value of the Property is $1,884,960
Requirement C: Loan Amount is $1,413,720
Requirement D: Debt Service Coverage Ratio is 1.85
Requirement E: Loan per unit is $176,715 Per Unit
Explanation:
Requirement A: Find the CAP Rate
The CAP Rate will be calculated using the following formula:
CAP Rate = Annual Net Operating Income (NOI) (Step1) / Property Capitalized Value (Step2)
Here
Operating Income is $235,620 (Step1)
Property Capitalized Value (Step2)
Now, by putting values we have:
CAP Rate = $235,620 / $1,884,960 = 12.5%
Step1: Find Annual Net Operating Income (NOI)
As we know that:
Operating Income = Expected Revenue - Operating Expense
Here
Expected Revenue from 8 Strip Malls = Rent / Month * 12 Months * (1 - Vacancy Ratio) * 8 Strips Malls
= $3,500 * 12 * (1 - 15%) * 8
= $285,600
Operating Expenses = Expected Revenue * 17.5%
= $285,600 * 17.5% = $49,980
Now by putting value in the above Operating Income equation, we have:
Annual Operating Income = $285,600 - $49,980 = $235,620
Step2: Find Property Capitalized Value (It is also Requirement B)
Property Capitalized Value = Annual Operating Income / Minimum Accepted Rate of Return (MARR)
Here
Annual Operating Income is $235,620 from Step1
MARR is 12.5%
By putting values, we have:
Capitalized Value of the Property = $235,620 / 12.5% = $1,884,960
Requirement C. Find Loan Amount
It is given in the question that the Loan Amount is 75% of Property Capitalized Cost. This implies:
Loan Amount = $1,884,960 * 75% = $1,413,720
Requirement D. Debt Service Coverage Ratio
Debt Service Coverage Ratio (DSCR) = Annual Net Operating Income / Total Debt Service for the Year
Here
Annual Net Operating Income is $235,620 from Step1
Total Debt Service for the Year $127,235 (See Step3 below)
By putting values, we have:
Debt Service Coverage Ratio = $235,620 / $127,235 = 1.85
Step3: Total Debt Service for the year
Total Debt Service for the year = Loan Amount * Debt Service Rate
Here
Loan Amount is $1,413,720
Debt Service Rate is 9%
By putting values, we have:
Total Debt Service for the year = $1,413,720 * 9% = $127,235
Requirement E. Find Loan Amount
We can find loan per unit by simply dividing the loan amount by number of strip mall. Here total number of strip mall are 8. This implies that:
Loan Per Unit = $1,413,720 / 8 Units = $176,715 Per Unit
Auto Body Repair Shop (ABRS) promises to pay Ben $1,000 a week to work for ABRS. Ben accepts and quits his job with Car Care Service. ABRS fails to provide a job for Ben. Ben has a cause of action based on
Answer:
Breach of Contract
Explanation:
If a contract was signed that promised a job/salary, then rescinding the job by the prospective employer is grounds for a "Breach of Contract" lawsuit.
Down Under Products, Ltd., of Australia has budgeted sales of its popular boomerang for the next four months as follows:
Sales in Units
April 54,000
May 75,000
June 94,000
July 82,000
The company is now in the process of preparing a production budget for the second quarter. Past experience has shown that end-of-month inventory levels must equal 20% of the following month’s sales. The inventory at the end of March was 10,800 units. Required: Prepare a production budget for the second quarter; in your budget, show the number of units to be produced each month and for the quarter in total.
down under products Ltd.
prodcution budget
april may june other
budgeted unit sales
total needs
required production in units
Answer:
Results are below.
Explanation:
Giving the following information:
Sales in Units
April 54,000
May 75,000
June 94,000
July 82,000
Desired ending inventory= 20% of the following month’s sales.
The inventory at the end of March was 10,800 units.
To calculate the production for each month, we need to use the following formula:
Production= sales + desired ending inventory - beginning inventory
April:
Sales= 54,000
Ending inventory= 75,000*0.2= 15,000
Beginning inventory= (10,800)
Total= 58,200 units
May:
Sales= 75,000
Ending inventory= 94,000*0.2= 18,800
Beginning inventory= (15,000)
Total= 78,800 units
June:
Sales= 94,000
Ending inventory= 82,000*0.2= 16,400
Beginning inventory= (18,800)
Total= 91,600 units
Total for the quarter= 228,600 units
In the above case, Sales in Units in the month of April is 54,000, in the month of May is 75,000, in the month of June is 94,000 and in the month of July is 82,000.
What is sales?A sale is defined as a transaction between the parties in which the purchaser acquires goods, services, or assets in return for money. In some cases, other assets are pay off to a seller.
Computation of production:
According to the available information,
Desirable closing inventory= 20% of the following month’s sales.
The inventory at the end of March was 10,800 units.
To calculate the production in each month, the formula is:
[tex]\text{Production= Sales + Desired Ending Inventory - Beginning Inventory}[/tex]
Production in the month of April:
According to the given information,
Sales= 54,000
Ending inventory:
[tex]=75,000\times \dfrac{20}{100}\\= 15,000[/tex]
Beginning inventory= 10,800
Now, apply the given values in the above formula:
[tex]\text{Production= Sales + Desired Ending Inventory - Beginning Inventory}\\\\\text{Production} =54,000+15,000-10,800\\\\\text{Production}=58,200\text{Units}[/tex]
Production in the month of May:
Sales= 75,000
Ending inventory:
[tex]=94,000\times \frac{20}{100}\\\\= 18,800[/tex]
Beginning inventory= 15,000
Now, apply the given values in the above formula:
[tex]\text{Production= Sales + Desired Ending Inventory - Beginning Inventory}\\\\\text{Production} =75,000+18,800-15,000\\\\\text{Production}=78,800\text{Units}[/tex]
Production in the month of June:
Sales= 94,000
Ending inventory:
[tex]872,000\times\dfrac{20}{100}= 16,400[/tex]
Beginning inventory= 18,800
Now, apply the given values in the above formula:
[tex]\text{Production= Sales + Desired Ending Inventory - Beginning Inventory}\\\\\text{Production} =94,000+16,400-18,800\\\\\text{Production}=91,600\text{Units}[/tex]
Therefore, the Total for the quarter :
[tex]=\text{May's Production + June's Production+Juily's Production}\\\\=58,200+78,800+91,600 \text{Units}\\= 228,600 \text{Units}[/tex]
Learn more about sales, refer to:
https://brainly.com/question/16911495
An investor owns 5,000 shares, which is 1% of a corporation's outstanding stock before a stock repurchase. The investor did not sell any of his stock during the 25,000 share repurchase. Which one of the following statements is correct?
A. The investor still owns 1% of the corporation.
B. The stock's price is likely to drop by 5%.
C. The investor owns more than 1% of the corporation.
D. The investor now has 5,250 shares.
Answer:
C. The investor owns more than 1% of the corporation.
Explanation:
data provided in the question
Number of shares own = 5,000 shares
Outstanding stock percentage = 1%
Repurchased shares = 25,000
Based on the above information, the following statement is correct
i.e the investor owns more than 1% of the corporation as the A option, B and D options are incorrect and the option C is most appropriate option
The Bathtub Division of Kirk Plumbing Corporation has recently approached the Faucet Division with a proposal. The Bathtub Division would like to make a special "ivory" tub with gold-plated fixtures for the company's 50-year anniversary. It would make only 5,000 of these units. It would like the Faucet Division to make the fixtures and provide them to the Bathtub Division at a transfer price of $160. If sold externally, the estimated variable cost per unit would be $140. However, by selling internally, the Faucet Division would save $6 per unit on variable selling expenses. The Faucet Division is currently operating at full capacity. Its standard unit sells for $43 per unit and has variable costs of $25.
Required:
Compute the minimum transfer price that the Faucet Division should be willing to accept, and discuss whether it should accept this offer.
Answer:
Minimum transfer price = $152
Explanation:
The minimum transfer price can be calculated by Adding variable cost and the contribution margin lost
Minimum transfer price = Variable cost + Contribution margin lost
Minimum transfer price = $134 + $18
Minimum transfer price = $152
Working
Variable cost = $140 -$6(saving) = $134
Contribution margin lost = Selling price - variable cost per unit
Contribution margin lost = $43 - $25
Contribution margin lost = $18
Decision: The offer should be accepted because the minimum transfer price of $152 is less than $160
Zoey Bella Company has a payroll of $10,000 for a five-day workweek. Its employees are paid each Friday for the five-day workweek. Prepare the adjusting entry on December 31 assuming the year ends on Thursday.
Answer:
Amount = (Total periodic pay / Number days in period) * Number days for current period
Amount = ($10,000/5) * 4
Amount = $8,000
Therefore, the amount to be recorded for adjusting entry is $8,000.
Journal Entry
Date Description Debit Credit
31 Dec Payroll expenses $8,000
Payroll expenses payable $8,000
(Being Payroll expenses recorded)
the for-profit unionized industries will be less productive. all taxpayers are better off. the union is economically harmful. the for-profit unionized industries will be harmed.
Answer: All taxpayers are better off.
Explanation:
In 2019, 23% of the Federal budget of $4.4 trillion was spent on Social Security which provided retirement benefits for about 45 million retired people. Most of this money came from Federal Revenues which are financed by Tax collections.
If the Unions helped more people secure pension benefits so that when they retire the Federal Government would not have to spend so much taking care of them, it can be argued that the amount of taxes paid by people would be less so all taxpayers would be better off.
Byrd Company produces one product, a putter called GO-Putter. Byrd uses a standard cost system and determines that it should take one hour of direct labor to produce one GO-Putter. The normal production capacity for this putter is 135,000 units per year. The total budgeted overhead at normal capacity is $877,500 comprised of $337,500 of variable costs and $540,000 of fixed costs. Byrd applies overhead on the basis of direct labor hours.
During the current year, Byrd produced 78,100 putters, worked 87,600 direct labor hours, and incurred variable overhead costs of $152,295 and fixed overhead costs of $452,650.
Required:
Compute the predetermined variable overhead rate and the predetermined fixed overhead rate.
Answer:
Results are below.
Explanation:
Giving the following information:
Estimated direct labor hours= 135,000
Estimated varaible overhead= $337,500
Estimated fixed overhead= $540,000
To calculate the predetermined overhead rate, we need to use the following formula:
Predetermined manufacturing overhead rate= total estimated overhead costs for the period/ total amount of allocation base
Variable:
Predetermined manufacturing overhead rate= 337,500/135,000= $2.5 per direct labor hour
Fixed:
Predetermined manufacturing overhead rate= 540,000/135,000= $4 per direct labor hour
Uchdorf Company invested $9,000,000 in a new product line. The life cycle of the product is projected to be 7 years with the following net income stream: $360,000, $360,000, $600,000, $1,080,000, $1,200,000, $2,520,000, and $1,444,000.
Required:
Calculate the ARR.
Answer:
Accounting rate of return = 24.10%
Explanation:
The accounting rate of return is the average annual income expressed as a percentage of the average investment.
The simple rate of return can be calculated using the two formula below:
Accounting rate of return
= Annual operating income/Average investment × 100
Average investment = (Initial cost + scrap value)/2
Average profit = Total profit over investment period / Number of years
Total profit = 360,000 + 360,000 + 600,000 +1,080,000, + 1,200,000 + 2,520,000 + 1,444,000 = 7,564,000.00
Average annual profit = 7,564,000/7 = 1,080,571.43
Average Investment = 9,000,000/2= 4500000
Accounting rate of return = 1,080,571.43 /4,500,000 × 100 = 24.10%
Accounting rate of return = 24.10%
The cash flows associated with each expansion site are summarized below. The expansion is planned for 5 years, and the interest rate is 12% per year. Use the B/C method to determine which site, if any, is the most acceptable. The monetary unit is $ million.
Site A B C
Initial cost, $ 55 70 200
M&O Cost, $/year 3 4 6
Benefits, $/year 20 29 55
Disbenefits, $/year 0.5 2 2.1
A. Site A
B. Site C
C. Site B
D. None
Answer:
C. Site B
Explanation:
A benefit-cost (B/C) method is a decision making techi=niques that uses benefit-cost ratio (BCR) to give a summary of overall relationship between the relative benefits and costs and a project being proposed.
To calculated the present values (PV) of Maintenance and Operations (M&O) Cost, Benefits and Disbenefits, we use cumulative discounting factor (CDF) for calculating the present value (PV) of an ordinary annuity as follows:
CDF = [{1 - [1 / (1 + r)]^n} / r] …………………………………. (1)
Where;
r = interest rate = 12%, or 0.12
n = number of years = 5
Substitute the values into equation (1), we have:
CDF = [{1 - [1 / (1 + 0.12)]^5} / 0.12] = 3.60
We can now calculate the B?C of each Site as follows as follows:
a. Calculation of B/C ratio of Site A
Initial cost = $55
PV of M&O Cost = M&O Cost per year * CDF = $3 * 3.60 = $10.80
PV of Benefits = Benefits per year * CDF =$20 * 3.60 = $72.00
PV of Disbenefits = Disbenefits per year * CDF = $0.5 * 3.60 = $1.80
PV of Total Cost = Initial cost + PV of M&O cost + PV of Disbenefits = $55 + $10.80 + $1.80 = $67.60
B/C ratio of Site A = PV of Benefits / PV of tota cost = $72.00 / $67.60 = 1.07
b. Calculation of B/C ratio of Site B
Initial cost = $70
PV of M&O Cost = M&O Cost per year * CDF = $4 * 3.60 = $14.40
PV of Benefits = Benefits per year * CDF =$29 * 3.60 = $104.40
PV of Disbenefits = Disbenefits per year * CDF = $2 * 3.60 = $7.20
PV of Total Cost = Initial cost + PV of M&O cost + PV of Disbenefits = $70 + $14.40 + $7.20 = $91.60
B/C ratio of Site A = PV of Benefits / PV of tota cost = $104.40 / $91.60 = 1.14
b. Calculation of B/C ratio of Site B
Initial cost = $200
PV of M&O Cost = M&O Cost per year * CDF = $6 * 3.60 = $21.60
PV of Benefits = Benefits per year * CDF =$55 * 3.60 = $198.00
PV of Disbenefits = Disbenefits per year * CDF = $2.1 * 3.60 = $7.56
PV of Total Cost = Initial cost + PV of M&O cost + PV of Disbenefits = $200 + $21.60 + $7.56 = $229.16
B/C ratio of Site A = PV of Benefits / PV of tota cost = $198.00 / $229.16 = 0.86
Conclusion
1. Since the B/C ratio of only Site A and Site B are greater than 1, both are acceptable.
2. But since Site B's B/C ratio of 1.14 is greater Site A's B/C ratio of 1.07, Site B is the most acceptable. Therefore, the correct option is C. Site B.
Determine the value-added, non-value-added, and total lead times, and the value-added ratio under the present and proposed production approaches. If required, round percentages to one decimal place. Present Approach Proposed Approach Value-added time 23 min 23 min Non-value-added time 1,582 min 105 min Total lead time 1,605 min 1,605 min Value-added ratio (as a percent) 14 % 21 %
Answer:
Hello some parts of your question is missing attached below is the missing part
Answer : value added times : 30 minutes , 30 minutes
non-value added times: 1210 minutes, 130 minutes
Total lead times : 1240 minutes, 160 minutes
value added time as a ratio: 2.4%, 18.8%
Explanation:
Given data:
production batch sizes = 40 units
process step 1 = 6 minutes
process step 2 = 10 minutes
process step 3 = 6 minutes
process step 4 = 8 minutes
Determining : The value added, non-value added , total lead times and value added ratio under the present and proposed production approaches
UNDER PRESENT PRODUCTION APPROACH
Th value added time:
= summation of all process times = (6+10+6+8) = 30 minutes
Non-value added time:
= Value added time *(Batch size -1) + move time between each step
= 30*39+8*5
= 1170 +40 = 1210 minutes
total lead time :
= value added time + non-value added time
= 30 + 1210 = 1240 minutes
value added time as a percentage/ratio
(value added time / total lead time) * 100
= 30 / 1240 * 100 = 2.4%
UNDER PROPOSED PRODUCTION APPROACH
value added time :
= summation of all process times = (6+10+6+8) = 30 minutes
Non-value added time :
= Value added time *(Batch size -1) + time between each step
= 30*4+2*5 = 120 + 10 = 130 mins
total lead time :
= value added time + non-value added time = 30 +130 = 160 mins
value added time as a percentage/ratio:
(value added time / total lead time ) * 100
= (30 / 160) * 100 = 18.8%
A company is considering a new project that will cost $19,000. This project would result in additional annual revenues of $6,000 for the next 5 years. The $19,000 cost is an example of a(n):
Answer:
Incremental cost
Explanation:
The Incremental cost is the cost that is to be incurred for producing an additional unit of product
Here the company considered a new project which cost $19,000 so this is an example of an incremental cost as the additional cost is incurred for producing additional units
Therefore the given situation represents the incremental cost
Which of these does NOT describe a friction that might prevent firms from choosing the optimal level of capital? A. Making too big of a change can be more expensive than making a few smaller changes. B. A firm might not be able to borrow enough to pay for the investments it wants to make. C. The firm likes its workers and doesn’t want to replace some jobs with machinery. D. Some capital is very specialized and cannot be re-sold in cases of economic downturns.
Answer:
C. The firm likes its workers and doesn’t want to replace some jobs with machinery.
Explanation:
Optimal level of capital simply refers to an ideal strategy used by a firm to raise capital. For example, a firm may decide between debt financing or equity financing, depending on the company's desired level of capital.
So, an already operational firm with that likes its workers and doesn’t want to replace some jobs with machinery has no direct relationship with its level of capital.
The Whistling Straits Corporation needs to raise $74 million to finance its expansion into new markets. The company will sell new shares of equity via a general cash offering to raise the needed funds. The offer price is $45 per share and the company's underwriters charge a spread of 6 percent. If the SEC filing fee and associated administrative expenses of the offering are $825,000, how many shares need to be sold? (Do not round intermediate calculations and enter your answer in dollars, not millions, rounded to the nearest whole number, e.g., 1,234,567.)
Answer:
1,768,913 new stocks
Explanation:
the company needs to raise amount needed to finance expansion plus SEC's filing and administrative fees = $74,000,000 + $825,000 = $74,825,000
net amount received per stock issued = stock price x (1 - underwriting fee) = $45 x (1 - 6%) = $42.30 per stock
the company needs to issue = $74,825,000 / $42.30 per stock = 1,768,912.53 = 1,768,913 new stocks
ABC uses the conventional retail method to determine its ending inventory at cost. Assume the beginning inventory at cost (retail) were $393,500 ($594,000), purchases during the current year at cost (retail) were $3,408,000 ($5,193,600), freight-in on these purchases totaled $159,500, sales during the current year totaled $4,666,000, and net markups were $414,000. What is the ending inventory value at cost
Answer:Ending Inventory at Cost= $981,248.40
Explanation:
Cost Retail
Beginning inventory $393,500 $594,000
purchases $3,408,000 $5,193,600
freight in $159,500,
net markups $414,000
Total $3,961,000 $6,201,600
Sales $4,666,000
Ending Inventory at Retail:=(Beginning inventory + purchases +net markups - Sales during the current year
594,000 + $5,193,600 + $414,000- $4,666,000, = $1,535,600
Cost to Retail Ratio:( Beginning inventory + purchases+freight in)/ (Beginning inventory + purchases +net markups )
=($393,500 + $3,408,000 +$159,500,) ÷ (594,000 + $5,193,600 + $414,000) =$3,961,000/$6, 201, 600= 0.638= 0.639
Ending Inventory at Cost: Ending Inventory at Retail x Cost to Retail Ratio
$1,535,600 x 0.639 = $981,248.40
n the process of performance appraisal, _____ occurs when assessors rate all workers as average. a. halo error b. central tendency error c. similar-to-me error d. leniency error
Answer:
b. central tendency error
Explanation:
Central tendency error is the error in which the rater propensity could place the most items on the middle side of the rating scale. In this the employer puts the employees based on the performance i.e it varies from 4 to 7, 8 to 10, 1 to 3, etc
Therefore in the given situation, when the rate of assessors determined the rate for all workers as an average so the central tendency occurs
Hence, the correct option is b.
Preference decisions compare potential projects that meet screening decision criteria and will be ranked in their preference order to differentiate between alternatives with respect to all of the following characteristics except:________a. importanceb. desirabilityc. feasibilityd. political prominence
Answer:
D
Explanation:
Political prominence inst determined in any of the capital budgeting methods. Also, political prominence shouldn't be a deciding factor when making an investment. a project might be politically prominent but it is unprofitable or doesn't align to the goals of the company.
The following data relate to the Denver Company's operations for the year ended December 31, 20XX:
Direct Materials Purchases $100,000
Indirect meterial usage 10,000
Indirect labor 10,000
Direct Labor 300,000
Sales salaries 100,000
Administrative salaries 50,000
Factory water and electricity 20,000
Advertising expenses 60,000
Depreciation-sales and general office 40,000
Depreciation-factory 50,000
Beginning Inventories:
Direct Materials $20,000
Work In Progress 60,000
Finished goods 80,000
Ending Inventories:
Direct Materials $30,000
Work in Progress 50,000
Finished goods 60,000
Required:
Prepare a statement of cost of goods manufactured.
Answer:
Cost of goods manufactured= $490,000
Explanation:
Giving the following information:
Overhead:
Indirect material usage 10,000
Indirect labor 10,000
Factory water and electricity 20,000
Depreciation-factory 50,000
Total overhead= 90,000
To calculate the cost of goods manufactured, we need to use the following formula:
cost of goods manufactured= beginning WIP + direct materials + direct labor + allocated manufacturing overhead - Ending WIP
Direct materials= 100,000 + 20,000 - 30,000= 90,000
cost of goods manufactured= 60,000 + 90,000 + 300,000 + 90,000 - 50,000
cost of goods manufactured= $490,000
Niles believes that the reports are true and does not intend to deceive Prime Business, but does not check the reports before certifying them. Can Niles be held liable to Prime Business
The complete question is:
Niles, an accountant, certifies several audit reports on Optimal Operational Processes, Inc., Nile's client, knowing that the company intends to use the reports to borrow money from Prime Business Lending Company to buy new equipment. Niles believes that the reports are true and does not intend to deceive Prime Business, but does not check the reports before certifying them. Can Niles be held liable to Prime Business?
Answer:
Yes can be held liable
Explanation:
An accountant that certifies audits of a company is expected.to do his due diligence. In this scenario Niles believed that the reports are true without checking them.
This is an act of negligence on Nile's part and he can be held liable for damages resulting from the oversight.
The certified audit report is not only being used by Prime business but other third parties like investors and other stakeholders. Any of these can hold Mike's liable for any misleading information in the audit reports
The production sector would NOT include Group of answer choices a Florida orange grove a California wine grower a meat packing plant
Answer: Meat packing plant
Explanation:
The options to the question are:
A. California wine grower
B. meat packing plant
C. horticultural nursery
D. Florida orange grove
E. none of the above
Of all the options given in the question, the correct answer is meat packing plant. It should be noted that the meat packaging plant will not be part of the production sector due to the fact that no productive activities are taking place, it only involves in services.
If the economy booms, RTF, Inc., stock is expected to return 9 percent. If the economy goes into a recessionary period, then RTF is expected to only return 4 percent. The probability of a boom is 68 percent while the probability of a recession is 32 percent. What is the variance of the returns on RTF, Inc., stock
Answer:
Variance = 5.44
Explanation:
The variance of a portfolio is a measure of the deviation of the returns of the assets making up the portfolio. Using the standard deviation, the variance can be worked out.
Standard deviation is measure of the total risks of an investment. It measures the volatility in return of an investment as a result of both systematic and non-systematic risks.
Non-systematic risk includes risk that are unique to a company like poor management, legal suit against the company .
The variance would be determined as follows:
Variance = Sum of P×(R- r )^2
P- probality
R- return on each asset
r- Expected return on portfolio
r =( Wa*Ra) + (Wb*Rb)
Expected return (r) = (9% × 0.68 ) + (4% × 0.32) = 7.4 %
Outcome R (R- r )^2 P×(R- r )^2
Recession 9 2.56 1.74
Boom 4 11.56 3.70
Total 5.44
Variance = Sum of P×(R- r )^2
Variance = 5.44
On January 31, 2016, Danvers Logistics, Inc., issued five-year, 7% bonds payable with a face value of $10,000,000. The bonds were issued at 96 and pay interest on January 31 and July 31. Danvers Logistics, Inc., amortizes bond discount by the straight-line method.
Record:
a. Issuance of the bonds on January 31, 2016.
b. The semiannual interest payment and amortization of bond discount on July 31, 2016.
c. The interest accrual and discount amortization on December 31, 2016.
Answer:
Journal entries are given below
Explanation:
Journal Entries
Requirement A: Issuance of the bonds on January 31, 2016.
Debit Credit
Cash (w) $9,600,000
Discount on bonds payable $400,000
Bonds payable $10,000,000
Working
Cash = 10,000,000*0.96 = $9,600,000
Discount on bonds payable = 10,000,000*0.04 = $400,000
Requirement B: The semiannual interest payment and amortization of bond discount on July 31, 2016.
Debit Credit
Interest expense $390,000
Cash (w) $350,000
Discount on bonds payable (w) $40,000
Working
Cash = 10,000,000x 0.07 x 6/12 = $350,000
Discount on bonds payable = 400000/(5months*2) = $40,000
Requirement C: The interest accrual and discount amortization on December 31, 2016.
Debit Credit
Interest expense $325,000
Cash (w) $291,666.67
Discount on bonds payable (w) $33333.33
Working
Cash = 10,000,000x 0.07 x 5months/12months = 291,666.67
Discount on bonds payable = 400,000/(5*2)*5/6 = 33,333.33
The issue of _____ concerns how often a particular project will be repeated and what its lifespan will be.
Full question reads;
The issue of _____ concerns how often a particular project will be repeated and what its lifespan will be.
a. frequency
b. consumption
c. pressures
d. rules
Answer:
a. frequency
Explanation:
Indeed, no particular human project can last forever, so there is a need to ascertain the frequency of a project, detailing how often the project would be repeated so as to also determine what the project's lifespan will be.
For example, a road construction project may take into account how often the road would be used, which provides insight into the frequency of road repairs and the overall lifetime of the car.
The issue of _____ concerns how often a particular project will be repeated and what its lifespan will be.
Shares in prince and nice have a beta of 0.9. The expected returns to the market are 10% and the risk free rate of return is 4%. What is the cost of equity capital for prince and nice?
Answer:
9.4%
Explanation:
using the CAPM formula, the cost of equity (Re) is:
Re = Rf + B(Rm - Rf)
Rf = risk free rate = 4%Rm = market risk = 10%B = beta = 0.9Re = 4% x [0.9 x (10% - 4%)] = 4% x (0.9 x 6%) = 4% x 5.4% = 9.4%
The cost of equity (Re) refers to the required rate of return that investors expect to receive from a certain investment, e.g. stocks or any particular project
You have just been instructed to develop a schedule for introducing a new product into the marketplace. Below are the elements that must appear in your schedule. Arrange these elements into a work breakdown structure (down through level 3), and then draw the arrow diagram. You may feel free to add additional topics as necessary.1. Production layout2. Market testing3. Review plant cost4. Select distributors5. Analyze selling cost6. Analyze customer reactions7. Storage and shipping cost8. Select salespeople9. Training salespeople10. Trained distributors
Answer:
Attached below is the arrangement of these elements with additional topics and arrow diagram
Explanation:
The given Elements are : Production layout , market testing , Review plant cost, select distributors, Analyze selling cost, Analyse customer reactions, storage and shipping cost, select salespeople, training sales people, trained distributors. including additional topics as well
How much time, on average, would a server need to spend on a customer to achieve a service rate of 20 customers per hour?
Answer:
3 hour 18 minutes or 3 hour
Explanation:
According to the given situation, the computation of time on average is shown below:-
The Average waiting time in the system
= [tex]\frac{1}{\mu} -\gamma[/tex]
Now we will put the values into the above formula to reach the time on average which is here below:-
[tex]= \frac{1}{20} - 1[/tex]
[tex]= \frac{1}{19}[/tex]
= 0.053 × 60 minutes
= 3 hours 18 minutes
We assume [tex]\gamma[/tex] is 1 hour
Therefore for computing the time on average we simply applied the above formula.
By 2002, Fisher's strategic initiatives in China had yielded significant results. They had 63% of the retail film market and 7,000 stores.
A. Exporting
B. Contractual agreements
C. Strategic alliances/joint ventures
D. Direct investment
Answer: Strategic alliances/joint ventures
Explanation:
From the question, we are informed that by 2002, Fisher's strategic initiatives in China had yielded significant results and that they had 63% of the retail film market and 7,000 stores.
The method used for their success was the strategic alliances or joint venture whereby two or more business or individuals come together and utilize the resources available to carry out a particular objective.
Which of the following terms pertains to registration with the Administrator of a mutual fund, closed-end investment company, or unit investment trust that is registered under the Securities Act of 1933 and also registered as an investment company under the Investment Company Act of 1940?
a. Qualification
b. Prevarication
c. Coordination
d. Notice filing
Answer: Notice filing
Explanation:
The term that pertains to registration with the Administrator of a mutual fund, closed-end investment company, or unit investment trust that is registered under the Securities Act of 1933 and also registered as an investment company under the Investment Company Act of 1940 is the notice filing.
It should be noted that federal covered securities are exempted from State registration and thereby a notice filing may be required.
Steady Company's stock has a beta of . If the risk-free rate is and the market risk premium is , what is an estimate of Steady Company's cost of equity?
The question is incomplete as it misses the figures. The following is the complete question.
Steady Company's stock has a beta of 0.21. If the risk-free rate is 6.2% and the market risk premium is 6.9%, what is an estimate of Steady Company's cost of equity?
Answer:
The cost of equity is 0.07649 or 7.649%
Explanation:
The required rate of return or cost of equity capital is the rate required by the investors to invest in a stock based on the systematic risk of the stock as measure by the beta. The required rate of return or cost of equity can be calculated using the CAPM equation. The CAPM equation is,
r = rRF + Beta * rpM
Where,
rRf is the risk free raterpM is the risk premium on marketr = 0.062 + 0.21 * 0.069
r = 0.07649 or 7.649%
All else being equal, an increased demand for U.S. products in the European Union will create a A.)supply of euros. B.)surplus of euros. C.)shortage of euros. D.)demand for euros.
Answer:
Correct Answer:
B.)surplus of euros.
Explanation:
United States of America as one of the most industrialized country with factories and firms producing goods and services engages in trade with other countries. Should their goods and services be demanded by European countries, it would create surplus of Euros due to the fact that, all the goods would be paid for by the common currency used by the European countries which is Euros.
30-year maturity bond with face value of $1,000 makes semiannual coupon payments and has a coupon rate of 8%. (Do not round intermediate calculations. Enter your answers as a percent rounded to 3 decimal places.) a. What is the yield to maturity if the bond is selling for $900?
Answer:
The answer is 15.508%
Explanation:
The annual coupon rate is:
8% x 900 x 2 / $1,000 = 14.4%
The yield to maturity as follows:
Yield to maturity (YTM) = [Coupon payment + (Face Value - Present Value) / Time to Maturity] / [(Face Value + Present Value) / 2]
=> YTM = [14.4% x $1,000 + ($1,000 - $900) / 30] / [ ($1,000 + $900) / 2] = 15.508%
