A flask is charged with 1.510 atm of N
2
O
4
(g) and 1.15 atmNO
2
(g) at 25
∘
C. The equilibrium reaction is given in the equation below. N
2
O
4
(g)⇌2NO
2
(g) After equilibrium is reached, the partial pressure of NO
2
is 0.512 atm. (a) What is the equilibrium partial pressure of N
2
O
4
? atm (b) Calculate the value of K
rho
for the reaction. (c) Is there sufficient information to calculate K, for the reaction? Yes, because the partial pressures of all the reactants and products are specified. Yes, because the temperature is specified, No, because the value of K
c
can be determined experimentally only. If K
c
can be calculated, find the value of K
c
, Otherwise, enter 0.
Answers
From the question;
1) The equilibrium pressure is 0.638 atm
2) Kp is 7.38 and there is sufficient information to obtain it
3) Kc is 0.0029
What is the equilibrium constant?We know that we have to set up the ICE table;
[tex]N_{2} O_{4}[/tex] ⇔ [tex]2NO_{2}[/tex]
I 1.510 1.15
C -x +2x
E 1.150 - x 1.15 + 2x
Given that;
x = 0.512
The pressure of [tex]N_{2} O_{4}[/tex] = 1.150 - 0.512
= 0.638 atm
Pressure of nitrogen dioxide = 1.15 + 2(0.512)
= 2.17 atm
Kp = [tex](2.17)^2[/tex]/0.638
Kp = 7.38
Kp= Kc (RT)^Δn
Kc = Kp/ (RT)^Δn
Kc = 7.38/(8.314 * 298)^1
= 0.0029
Learn more about equilibrium constant:https://brainly.com/question/28559466
#SPJ4
Related Questions
The pressure 10.0 m under water is 199 kPa What is this pressure in atmospheres (atm)? P= atm What is this pressure in millimeters of mercury (mmHg)? P= mmHg
Answers
The pressure 10.0 m under water is 199 kPa. The pressure in atmospheres is 1.97 atm. The pressure in millimeters of mercury is 1493.5 mmHg.
Given; Pressure 10.0m under water = 199 kPa
To find: The pressure in atmospheres and millimeters of mercury (mmHg)
Conversion factors to convert kPa to atm and mmHg are;
1 atm = 101.3 kPa1 k
Pa = 7.50 mm
HgPressure in atmospheres;P = 199 kPa / 101.3 kPa/atm
P = 1.97 atm (rounded to two significant figures)
Therefore, the pressure is 1.97 atm.
Pressure in millimeters of mercury (mmHg);P = 199 kPa × 7.50 mmHg/kPa
P = 1493.5 mmHg (rounded to two significant figures)
Therefore, the pressure is 1493.5 mmHg.
Therefore, the answers are:P = 1.97 atm (to two significant figures) and P = 1493.5 mmHg (to two significant figures).
Hence, The pressure 10.0 m under water is 199 kPa. The pressure in atmospheres is 1.97 atm. The pressure in millimeters of mercury is 1493.5 mmHg.
Learn more about atmospheres
brainly.com/question/32358340
#SPJ11
one region with a low partial pressure for oxygen would be. True/False
Answers
Yes, it is true that one region with a low partial pressure for oxygen would be.
Air is composed of a mixture of gases, each of which contributes to the total atmospheric pressure. The pressure exerted by a specific gas is known as its partial pressure. Oxygen has a partial pressure of around 160 mmHg (millimeters of mercury), while carbon dioxide has a partial pressure of about 0.23 mmHg, nitrogen has a partial pressure of around 600 mmHg, and water vapor has a partial pressure of around 47 mmHg in the Earth's atmosphere.
A region with a low partial pressure of oxygen occurs at high altitudes, where the air pressure is low. As the partial pressure of oxygen decreases, the concentration of oxygen decreases as well. As a result, the amount of oxygen available to support human respiration decreases, resulting in hypoxia (oxygen deprivation). When climbing to high altitudes, it's critical to take the necessary precautions to avoid hypoxia.
Learn more about hypoxia here:
https://brainly.com/question/30392763
#SPJ11
Which of the following statements about the atom is 12,6
C TRUE? Select all that apply. It has 6 protons in its nucleus. It has 12 neutrons in its nucleus. Its atomic weight is 12. Its atomic number is 6. It has 6 electrons orbiting the nucleus.
Answers
The following statements about the atom 12,6 C are true: It has 6 protons in its nucleus. Its atomic weight is 12. Its atomic number is 6. It has 6 electrons orbiting the nucleus.
An atom is the smallest constituent unit of matter that has the chemical properties of an element. It is composed of subatomic particles: protons, neutrons, and electrons. The proton and neutron make up the nucleus at the center of the atom, and the electrons orbit around the nucleus.
The atomic number of an element is the number of protons present in its nucleus. 12,6 C indicates that carbon has 6 protons in its nucleus. The atomic mass of an atom is the total mass of its protons and neutrons. Carbon's atomic weight is 12 because it has 6 protons and 6 neutrons in its nucleus. An atom is electrically neutral because it has equal numbers of electrons and protons. Carbon has 6 electrons orbiting its nucleus.
Learn more about subatomic particles: https://brainly.com/question/21478280
#SPJ11
which of the following is primarily a hop-derived flavor?
Answers
Hop bitterness is primarily a hop-derived flavor. It is contributed by alpha acids that undergo isomerization during the brewing process, resulting in iso-alpha acids that provide balance and complexity to beer.
Among the various flavors associated with hops, one primary hop-derived flavor is "hop bitterness." Hop bitterness is a key characteristic in many beer styles and is derived from the chemical compounds present in hops. Hops are the female flowers of the hop plant (Humulus lupulus) and are an essential ingredient in brewing. They contribute various flavors and aromas to beer, with bitterness being one of the most distinct and recognizable characteristics. The bitterness comes from specific compounds known as alpha acids, primarily humulone and cohumulone, found in the resin glands of hop flowers.
During the brewing process, when hops are added to the boiling wort (unfermented beer), these alpha acids are released and undergo isomerization, converting them into iso-alpha acids. These iso-alpha acids contribute bitterness to the beer. The longer hops are boiled, the greater the extraction of bitterness.
Hop bitterness provides balance and complexity to beer, counteracting the sweetness of malt and contributing to the overall flavor profile. Bitterness is measured in International Bitterness Units (IBUs), which quantifies the concentration of iso-alpha acids in a beer. Beers can have a wide range of bitterness levels, from low IBUs in mild ales to high IBUs in hop-forward India Pale Ales (IPAs).
To learn more about isomerization
https://brainly.com/question/9116728
#SPJ11
You have an aqueous solution of NaCl that has a freezing point of −4.15
∘
C. What mass (in grams) of NaCl must be added to 1000 g of this solution to lower the freezing point to −12.00
∘
C ? (Assume a van't Hoff factor of 1.9 for NaCl ). ( Kf for water is 1.86
∘
C⋅kg/mol ).
Answers
2.77 moles of excess NaCl from the solution to achieve the desired freezing point depression.
To calculate the mass of NaCl needed to lower the freezing point of the solution, we can use the equation:
ΔT = Kf * m * i
Where:
ΔT is the change in freezing point (in Celsius),
Kf is the cryoscopic constant for water (1.86 °C·kg/mol),
m is the molality of the solution (in mol solute/kg solvent),
and i is the van't Hoff factor.
We need to find the molality (m) of the solution to determine the mass of NaCl required. The molality is given by:
m = (moles of solute) / (mass of solvent in kg)
Given:
Freezing point depression (ΔT) = -12.00 °C - (-4.15 °C) = -7.85 °C
Kf = 1.86 °C·kg/mol
Mass of solvent = 1000 g
First, let's calculate the molality (m):
m = (moles of solute) / (mass of solvent in kg)
The mass of solvent in kg is 1000 g / 1000 = 1 kg.
Now, let's calculate the moles of solute:
ΔT = Kf * m * i
-7.85 °C = (1.86 °C·kg/mol) * m * 1.9
Solving for m:
m = (-7.85 °C) / [(1.86 °C·kg/mol) * 1.9]
m ≈ -2.77 mol/kg
Since molality (m) is negative, it indicates that we have excess solute in the solution. We need to add more solute (NaCl) to reach the desired freezing point depression.
To find the mass of NaCl required, we can use the equation:
mass of solute = m * (mass of solvent in kg)
mass of solute = (-2.77 mol/kg) * 1 kg
mass of solute ≈ -2.77 mol
The negative sign indicates that we need to remove 2.77 moles of excess NaCl from the solution to achieve the desired freezing point depression.
To know more about freezing point depression here
https://brainly.com/question/30389524
#SPJ4
How many moles is 3.2×10
22
SO
2
molecules? a) 0.053 b) 19 c) 0.0012 d) 2.3 e) 0.21 What is the mass in grams of 1.4×10
23
CO
2
molecules? a) 0.0053 g b) 10.g c) 4.3 g d) 19 g e) 7.6 g How many moles of carbon are in 5.5 mol of C
6
H
12
O
6
? a) 33 b) 11 c) 66 d) 9.1×10
22
e) 6.6×10
24
How many moles of carbon are in 4.5 g of C
6
H
12
O
6
? a) 0.025 mol b) 0.37 mol c) 2.3 mol d) 0.15 mol e) 27 mol
Answers
The number of moles of [tex]3.2\times10^{22[/tex] SO2 molecules is approximately 0.053 moles.
What is the number of moles of [tex]1.4\times10^{23[/tex] CO2 molecules?To determine the number of moles, we need to use Avogadro's number, which states that one mole of any substance contains [tex]6.022\times10^{23[/tex] particles (atoms, molecules, ions, etc.).
By dividing the given number of molecules by Avogadro's number, we can calculate the corresponding number of moles.
For the first question, dividing [tex]3.2\times10^{22[/tex] SO2 molecules by Avogadro's number yields approximately 0.053 moles.
For the second question, dividing [tex]1.4\times 10^{23[/tex] CO2 molecules by Avogadro's number will provide the number of moles of CO2.
To convert between the number of moles and mass, we need to know the molar mass of the substance. The molar mass is the mass of one mole of a substance and is expressed in grams per mole (g/mol).
By multiplying the number of moles by the molar mass, we can find the mass of the substance.
For the third question, knowing that C6H12O6 is glucose, we can determine the molar mass of glucose and multiply it by 5.5 moles to find the number of moles of carbon.
For the fourth question, knowing the molar mass of C6H12O6, we can convert the given mass of 4.5 g to moles of C6H12O6 and then determine the number of moles of carbon.
Avogadro's number and molar mass are fundamental concepts in chemistry.
Avogadro's number allows us to relate the number of particles (atoms, molecules, etc.) to the number of moles, enabling us to convert between the microscopic and macroscopic scales.
Molar mass, on the other hand, provides a measure of the mass of one mole of a substance and is used to convert between moles and grams.
These concepts are essential in stoichiometry, where chemical equations and reactions are balanced based on the moles of reactants and products.
Understanding moles, molecules, and mass relationships is crucial for various calculations and analyses in chemistry.
Learn more about number of moles
brainly.com/question/9734304
#SPJ11
which action is not part of the acute stroke pathway
Answers
One action that is not typically part of the acute stroke pathway is "Surgical intervention." The primary goal of the acute stroke pathway is to quickly assess and triage the patient to provide.
Rapid recognition and activation: Recognizing the signs and symptoms of a stroke and activating the stroke team or emergency medical services (EMS).
Early assessment: Conducting a rapid assessment of the patient's neurological status and performing relevant diagnostic tests, such as brain imaging (e.g., CT scan).
Time-sensitive interventions: Administering time-sensitive treatments such as intravenous thrombolytic therapy (e.g., tissue plasminogen activator - tPA) or endovascular therapy (e.g., mechanical thrombectomy) in eligible cases.
Supportive care: Providing supportive care to manage symptoms, stabilize the patient, and prevent complications.
Transfer to specialized stroke unit: Arranging for the transfer of the patient to a specialized stroke unit or comprehensive stroke center for further evaluation and management.
While surgical intervention may be required in certain cases of stroke, such as to treat an underlying cause or to manage complications, it is not a standard component of the acute stroke pathway. Surgical interventions are typically considered on a case-by-case basis and may be carried out after initial stabilization and evaluation of the patient.
To learn more about triage
https://brainly.com/question/8942362
#SPJ11
The action not part of the acute stroke pathway is the classification of stroke symptoms getting resolved within a 24-hour period due to the restoration of adequate blood flow, which instead defines a Transient Ischemic Attack (TIA).
Explanation:The acute stroke pathway is a series of precise medical procedures intended to diagnose and treat a patient who may potentially be experiencing a stroke. This pathway involves phases such as immediate clinical assessment, urgent brain imaging, and the use of thrombolysis or thrombectomy where applicable. However, one action that is not part of the acute stroke pathway is the classification of stroke symptoms that are resolved within a 24-hour period due to restoration of adequate blood flow; this is instead indicative of a Transient Ischemic Attack (TIA), rather than a full stroke.
Learn more about Acute Stroke Pathway here:https://brainly.com/question/33727011
#SPJ11
Briefly explain any differences observed for DI water compared to a buffered solution when HCl or NaOH(aq) was added to each. Look at all your data, including pH values. 2- Consider a buffer solution that consists of the weak acid, HF(Hq), and its conjugate base, F
−
. a. Write the reaction that occurs when a strong acid (H
+
or H
3
O
+
)is added to the buffered solution. b. Write the reaction that occurs when a strong base (OH
−
)is added to the buffered solution
Answers
The buffered solution maintains a relatively stable pH and resists significant changes when HCl or NaOH(aq) is added, while DI water experiences large pH shifts.
When comparing DI water to a buffered solution, several differences can be observed when HCl or NaOH(aq) is added.
1. pH Change: In DI water, the pH changes significantly when HCl or NaOH(aq) is added, as these are strong acids and bases. The pH may decrease significantly with HCl or increase with NaOH due to the high concentration of H+ or OH- ions added to the solution. In contrast, the buffered solution maintains its pH relatively stable, showing only a slight change or even resisting changes in pH when small amounts of HCl or NaOH(aq) are added.
2. Buffering Capacity: DI water lacks buffering capacity, meaning it cannot resist changes in pH. Thus, the addition of HCl or NaOH(aq) can cause large swings in pH. On the other hand, a buffered solution contains a weak acid and its conjugate base, which can neutralize the added H+ or OH- ions, thereby maintaining the pH within a certain range.
3. Equilibrium Shift: In a buffered solution, when a strong acid (H+ or H3O+) is added, the weak acid component of the buffer reacts with the additional H+ ions, shifting the equilibrium towards the formation of its conjugate base. This reaction helps to maintain the pH of the solution. Conversely, when a strong base (OH-) is added to the buffered solution, the weak acid component reacts with the OH- ions to form water and shift the equilibrium towards the formation of the weak acid.
Overall, the buffered solution shows a greater ability to resist changes in pH compared to DI water, which lacks buffering capacity. The presence of a weak acid and its conjugate base in the buffered solution allows for the maintenance of a relatively constant pH, even when small amounts of strong acids or bases are added.
To learn more about buffered solution refer here:
https://brainly.com/question/31367305
#SPJ11
The decomposition of hydrogen peroxide in the presence of potassium iodide is believed to occur by the following mechanism: step 1 slow: H2O2+I−→H2O+OI− step 2 fast: H2O2+OI−→H2O+O2+I− (1) What is the equation for the overall reaction? Use the smallest integer coefficients possible. If a box is not needed, leave it blank. (2) Which species acts as a catalyst? Enter formula. If none, leave box blank: (3) Which species acts as a reaction intermediate? Enter formula. If none, leave box blank: (4) Complete the rate law for the overall reaction that is consistent with this mechanism. (Use the form k[A]m[B]n.., where ' 1′ is understood (so don't write it) for m, n etc.) Rate =
Answers
The overall reaction equation can be obtained by adding the two steps of the mechanism ' 2H[tex]_{2}[/tex]O[tex]_{2}[/tex] + 2I- → 2H[tex]_{2}[/tex]O + I[tex]_{2}[/tex] '.
The overall reaction equation represents the combined effect of both steps in the mechanism, showing the reactants and products with the smallest integer coefficients.
None of the species act as a catalyst in this mechanism.
In this mechanism, there is no species that acts as a catalyst, meaning there is no substance that speeds up the reaction without being consumed.
OI- acts as a reaction intermediate.
OI- is considered a reaction intermediate because it is formed in one step and consumed in a subsequent step, but it is not present in the overall reaction.
The rate law for the overall reaction can be determined by examining the slow step (step 1) ' Rate = k[H[tex]_{2}[/tex]O[tex]_{2}[/tex]][I-] '.
The rate law for the overall reaction is determined by the slow step, which involves the concentration of H[tex]_{2}[/tex]O[tex]_{2}[/tex] and I-. The rate is proportional to the concentration of these species, represented by [H[tex]_{2}[/tex]O[tex]_{2}[/tex]][I-].
You can learn more about reaction equation at
https://brainly.com/question/11231920
#SPJ11
Provide a systematic name for each of the following compounds: Damarbon Freder ello total (a) (b) (c) (d) bando para (f) (g) 19 CC
Answers
Except for 19 CC, the rest of the given chemical compounds are not recognized and, therefore, do not have systematic names.
A systematic name is a name given to a chemical compound to describe its chemical structure in terms of its chemical nomenclature. The systematic names for the following compounds are:
(a) Damarbon - It is not a recognized chemical compound, and therefore, does not have a systematic name.
(b) Freder ello total - It is not a recognized chemical compound, and therefore, does not have a systematic name.
(c) Bando para - It is not a recognized chemical compound, and therefore, does not have a systematic name.
(d) 19 CC - It is not a recognized chemical compound, and therefore, does not have a systematic name.
(e) Ello Total - It is not a recognized chemical compound, and therefore, does not have a systematic name.
(f) Damarbon - It is not a recognized chemical compound, and therefore, does not have a systematic name.
(g) Bando para - It is not a recognized chemical compound, and therefore, does not have a systematic name.
Therefore, except for 19 CC, the rest of the given chemical compounds are not recognized and, therefore, do not have systematic names.
To know more about chemical visit-
https://brainly.com/question/29240183
#SPJ11
How many protons, neutrons, and electrons does
195
pt
3+
possess? 117 protons, 78 neutrons, 75 electrons 78 protons, 64 neutrons, 117 electrons 78 protons, 117 neutrons, 75 electrons 195 protons, 195 neutrons, 78 electrons
Answers
The element Platinum consists of 78 protons, 117 neutrons, and 75 electrons. Thus, option C is correct.
The element "Pt" stands for Platinum. The atomic number of the platinum element is 78. The superscript given in the question states that the platinum ion has a charge of +3. The charge is positive. We need to refer to the periodic table to estimate the number of electrons and protons.
The atomic number represents the number of protons present in the nucleus. If the ion is positive, the number of electrons will be less than the number of protons. The subtraction of charge from the atomic number will give the number of electrons.
To learn more about Atomic numbers
https://brainly.com/question/8834373
#SPJ4
The complete question is:
How many protons, neutrons, and electrons does pt^3+ possess?
a. 117 protons, 78 neutrons, 75 electrons
b. 78 protons, 64 neutrons, 117 electrons
c. 78 protons, 117 neutrons, 75 electrons
d. 195 protons, 195 neutrons, 78 electrons
Four mass measurements of a meta cube were made using laboratory balance. The rosults were 24.02 g,23.99 g,23,98 g, and 23.97 g. the actual mass of the metal cue is 25.00 g. Are the mass measurements accurate: are the mass measurements precise? accurate: no precise: yes accurate: yes precise: no accurate: no precise: no accurate: yes precise: yns none of the above
Answers
Are the mass measurements accurate: no
Are the mass measurements precise: yes
To determine if the mass measurements are accurate, we compare them to the actual mass of the metal cube, which is 25.00 g. The measurements of 24.02 g, 23.99 g, 23.98 g, and 23.97 g are all lower than the actual mass, indicating that they are not accurate.
To determine if the mass measurements are precise, we look at the consistency of the measurements. The measurements are all very close to each other, with a range of only 0.05 g. This indicates that the measurements are precise, as they show consistency and repeatability.
Therefore, the mass measurements are accurate: no, and precise: yes.
Learn more about measurements here:
https://brainly.com/question/2107310
#SPJ11
The vapor pressure of methanol is 0.128 atm at 20.0∘C. The normal boiling point is 64.7∘C. What is the heat of vaporization of methanol? A) 0.382 kJ/mol B) 0.764 kJ/mol C) 16.5 kJ/mol ln(Ptap T2PtapT1)=RΔHvan (T21−T11)
Answers
The vapor pressure of methanol is 0.128 atm at 20.0∘C. The normal boiling point is 64.7∘C. the heat of vaporization of methanol is approximately 0.03292 kJ/mol.
To determine the heat of vaporization (ΔHvap) of methanol, we can use the Clausius-Clapeyron equation:
ln(P₂/P₁) = -ΔHvap/R * (1/T₂ - 1/T₁)
Where:
P₁ = vapor pressure at temperature T₁
P₂ = vapor pressure at temperature T₂
ΔHvap = heat of vaporization
R = ideal gas constant (8.314 J/(mol·K))
Given:
P₁ = 0.128 atm (vapor pressure at 20.0°C)
T₁ = 20.0°C = 293.15 K
T₂ = boiling point = 64.7°C = 337.85 K
Substituting these values into the equation:
ln(P₂/P₁) = -ΔHvap/R * (1/T₂ - 1/T₁)
ln(P₂/0.128) = -ΔHvap/(8.314) * (1/337.85 - 1/293.15)
Now we can solve for ΔHvap by rearranging the equation:
ΔHvap = -R * (1/T₂ - 1/T₁) * ln(P₂/0.128)
Plugging in the values and calculating:
ΔHvap = -8.314 J/(mol·K) * (1/337.85 K - 1/293.15 K) * ln(P₂/0.128)
Calculating the value gives:
ΔHvap ≈ 32.92 J/mol
To convert this to kilojoules per mole, we divide by 1000:
ΔHvap ≈ 0.03292 kJ/mol
Therefore, the heat of vaporization of methanol is approximately 0.03292 kJ/mol.
To know more about methanol refer here:
https://brainly.com/question/3909690#
#SPJ11
write the rate law for the following elementary reaction:
(a)CH3NC(g) → CH3CN(g)
(b)O3(g) + NO(g) → O₂(g) + NO₂(g)
(C)O3(g) → O2 + 0(g)
(d)03(g) + O(g) → 20₂(g)
(e) ¹⁴6C → ¹⁴7N+ ßparticle(nucleardecay)
(a)rate= K[CH3NC]
(b)rate= K[03] [NO]
(c)rate = K[03]
(d)rate = K[03][0]
(e)rate = K[¹⁴6C]
Answers
Rate law for the following elementary reactions is given as follows:¹⁴6C → ¹⁴7N + ß particle (nuclear decay)Rate law = k [¹⁴6C], Here, k is the rate constant.
a) CH3NC(g) → CH3CN(g)
Rate law = k [CH3NC]Here, k is the rate constant.
b) O3(g) + NO(g) → O2(g) + NO2(g)
Rate law = k [O3] [NO]
Here, k is the rate constant.
c) O3(g) → O2(g) + O(g)
Rate law = k [O3]
Here, k is the rate constant.
d) O3(g) + O(g) → 2O2(g)
Rate law = k [O3] [O]
Here, k is the rate constant.
e) ¹⁴6C → ¹⁴7N + ß particle (nuclear decay)Rate law = k [¹⁴6C]
Here, k is the rate constant.
To know more about reactions visit-
https://brainly.com/question/16737295
#SPJ11
Which of the following pairs would be the best buffer at pH 10.0? SHOW YOUR WORK a. Acetic acid and sodium acetate (pK
a
=4.76) b. H
2
CO
3
and NaHCO
3
(pK
a
values are 3.77 and 10.4) c. Lactic acid and sodium lactate (pK
a
=3.86) d. NaH
2
PO
4
and Na
2
HPO
4
(pK
a
values are 2.1,7.2,12.4) c. Sodium succinate and succinic acid (pK
a
=4.21)
Answers
To determine the best buffer at pH 10.0, we need to choose a pair of compounds with pKa values closest to the desired pH. The correct pair would be option B, [tex]H_2CO_3[/tex] and [tex]NaHCO_3[/tex].
The buffer system should consist of a weak acid and its conjugate base, or a weak base and its conjugate acid.
Let's analyze each option:
a. Acetic acid and sodium acetate (pKa = 4.76): The pKa value of acetic acid is significantly lower than the desired pH of 10.0, so this option is not suitable.
b. [tex]H_2CO_3[/tex] and [tex]NaHCO_3[/tex] (pKa values are 3.77 and 10.4): The pKa value of [tex]H_2CO_3[/tex] is close to the desired pH of 10.0, making this option a potential buffer system.
c. Lactic acid and sodium lactate (pKa = 3.86): The pKa value of lactic acid is lower than the desired pH, so this option is not ideal.
d. [tex]NaH_2PO_4[/tex] and [tex]Na_2HPO_4[/tex] (pKa values are 2.1, 7.2, 12.4): The pKa values of this buffer system do not align well with the desired pH of 10.0, so this option is not suitable.
e. Sodium succinate and succinic acid (pKa = 4.21): The pKa value of succinic acid is lower than the desired pH, so this option is not optimal.
Based on the analysis, option b, [tex]H_2CO_3[/tex] and [tex]NaHCO_3[/tex] , appears to be the best buffer system at pH 10.0, as the pKa value of [tex]H_2CO_3[/tex] is closest to the desired pH.
Learn more about pKa values here:
https://brainly.com/question/33643338
#SPJ11
how to calculate dissolved oxygen in water mg/l henry's law
Answers
To calculate the dissolved oxygen in water in mg/L using Henry's Law, you need to use the following formula Here, KH is the Henry's Law constant, and PPO2 is the partial pressure of oxygen in the gas phase.
Henry's Law states that the solubility of a gas in a liquid is directly proportional to the partial pressure of the gas above the liquid. It means that as the partial pressure of oxygen in the air above water increases, the amount of dissolved oxygen in the water also increases. Hence, Henry's Law can be used to calculate the amount of dissolved oxygen in water.
To use the formula to calculate the dissolved oxygen in water, you need to know the Henry's Law constant for oxygen at the temperature and salinity of the water you are testing. The Henry's Law constant for oxygen at standard temperature and pressure (STP) is approximately 756.7 L atm/mol. At sea level, the atmospheric pressure is about 1 atm, and the fractional concentration of oxygen in air is approximately 0.21. Therefore, the partial pressure of oxygen in air is: PPO2 = 1 atm x 0.21 = 0.21 atm Therefore, the dissolved oxygen concentration in water in mg/L using Henry's Law is 158.7 mg/L.
To know more about oxygen visit :
https://brainly.com/question/33311650
#SPJ11
ions that comprise KF are :
K + and F2-
K+ and F-
K 2+ and F2-
K3+ and F3-
K3+ and F-
please show your work on how you got the answers.
Answers
The number of potassium ions is 1 and the number of fluoride ions is 1. Therefore, the correct answer is K+ and F-.
The ions that comprise KF are K+ and F-. The compound potassium fluoride (KF) is composed of potassium ions (K+) and fluoride ions (F-). It is an ionic compound, which means that it is made up of positively charged cations (K+) and negatively charged anions (F-) held together by electrostatic attraction. The formula unit of KF represents the simplest whole number ratio of potassium ions to fluoride ions in the compound. Here, the number of potassium ions is 1 and the number of fluoride ions is 1. Therefore, the correct answer is K+ and F-.
learn more about electrostatic attraction-
https://brainly.com/question/16871517?utm_source=android&utm_medium=share&utm_campaign=question
#SPJ11
1a. Using the ideal gas equation, write an expression for the total number of moles initially contained in the large vessel (V1) and the small vessel (V2) in terms of their pressure and temperature.
1b. Considering the two interconnected vessels, write an expression for the total initial material quantity in the overall system in terms of T1,i, T2,i, P1,i, and P2,i.
1c. Applying material-balance principles, write an expression for the total final material quantity in the overall system, at the system condition following step 7 of the activity.
1d. Show that the ratio of volumes follows the relationship: V2 / V1 = [(P1,i / T1,i) – (P1,f / T1,f)] / [(P2,f / T2,f) – (P2,i / T2,i)]
Answers
Total initial material quantity in the overall system is the sum of moles in V₁ and V₂.
1a. Ideal gas equation states that PV = nRT.
b. (P₁V₁ + P₂V₂) / R(T₁)i + (T₂)i.
c. [(P₁,i / T₁,i) – (P₁,f / T₁,f)] / [(P₂,f / T₂,f) – (P₂,i / T₂,i)].
The expression for the total number of moles initially contained in the large vessel (V₁) and the small vessel (V₂) in terms of their pressure and temperature is given as follows:
n₁ = (P₁V₁) / (RT₁)i.n₂ = (P₂V₂) / (RT₂)i.
1b. Total initial material quantity in the overall system is the sum of moles in V₁ and V₂.
Thus, the expression for the total initial material quantity in the overall system in terms of T₁,i, T₂,i, P₁,i, and P₁,i is given as follows:
N = n₁ + n₂
= (P₁V₁ + P₂V₂) / R(T₁)i + (T₂)i.
1c. Applying material-balance principles, the expression for the total final material quantity in the overall system is Nf = (P₁V₁ + P₂V₂) / R(T₁)f + (T₂)f.
1d. Show that the ratio of volumes follows the relationship:
V₂ / V₁ = [(P₁,i / T₁,i) – (P₁,f / T₁,f)] / [(P₂,f / T₂,f) – (P₂,i / T₂,i)].
(P₁V₁) / (T₁)i - (P₁V₁) / (T₁)f = (P₂V₂) / (T₂)f - (P₂V₂) / (T₂)i.
(P₁V₁ / R)(1 / T₁)i - (P₁V₁ / R)(1 / T₁)f = (P₂V₂ / R)(1 / T₂)f - (P₂V₂ / R)(1 / T₂)i.P₁V₁ / (RT₁)i - P₁V₁ / (RT₁)f
= P₂V₂ / (RT₂)f - P₂V₂ / (RT₂)i.
P₁V₁ + P₂V₂ = V₁P₁(f) + V₂P₂(f).
Since the mass of gas in each vessel is constant,
PV = constant.P₁V₁ + P₂V₂ = P₁(f)V₁(f) + P₂(f)V₂(f).V₂ / V₁
= [(P₁,i / T₁,i) – (P₁,f / T₁,f)] / [(P₂,f / T₂,f) – (P₂,i / T₂,i)].
Hence proved.
To know more about Ideal gas equation, visit:
https://brainly.com/question/30935329
#SPJ11
how many structures are possible for a trigonal bipyramidal molecule
Answers
A trigonal bipyramidal molecule is a molecule that has five atoms in the molecule. The shape is described as having three equatorial atoms in a triangular shape and two axial atoms at an angle of 90 degrees from the equatorial plane.
There are two different types of positions in the trigonal bipyramidal shape. The first is the equatorial position, which has three positions, and the second is the axial position, which has two positions. Therefore, a trigonal bipyramidal molecule has two possible structures. The two possible structures for a trigonal bipyramidal molecule are:All five atoms are the same, which is known as a symmetrical molecule.
The structure of this type of molecule is trigonal bipyramidal, which is the shape of the molecule with three atoms in the equatorial plane and two atoms above and below that plane. There is no net dipole moment for this structure since all atoms have an identical electronegativity. A molecule with two different atoms in the axial positions is known as an asymmetric molecule.
The structure of this type of molecule is also trigonal bipyramidal, but it has a net dipole moment because of the different electronegativity of the two atoms at the axial position. There are 2 different structures for an asymmetric molecule. The two structures are called cis and trans isomers. This structure is often found in inorganic chemistry. There are two different types of positions in the trigonal bipyramidal shape. The first is the equatorial position, which has three positions, and the second is the axial position, which has two positions. Therefore, a trigonal bipyramidal molecule has two possible structures.
Learn more about trigonal bipyramidal molecule
brainly.com/question/31613039
#SPJ11
What is wrong with the following molecular formula: SOO (sulfur dioxide)?
Answers
The molecular formula "SOO" is incorrect because it suggests an inappropriate arrangement of atoms and violates the principles of chemical bonding and electron configuration.
The molecular formula "SOO" (sulfur dioxide) is incorrect because it violates the fundamental principles of chemical bonding and the octet rule.
Sulfur dioxide (SO2) is a well-known chemical compound consisting of one sulfur atom (S) bonded to two oxygen atoms (O). Each oxygen atom forms a double bond with the sulfur atom, resulting in a stable and balanced structure. However, the molecular formula "SOO" implies that there are two sulfur atoms bonded to a single oxygen atom, which is chemically unrealistic.
The octet rule states that atoms tend to gain, lose, or share electrons to achieve a stable electron configuration with a full outer shell of eight electrons (except for hydrogen and helium). In the case of sulfur, it needs two additional electrons to achieve an octet, and oxygen needs six additional electrons. The correct molecular formula, SO2, satisfies these requirements, with each atom sharing electrons to complete their valence shells.
Therefore, the molecular formula "SOO" is incorrect because it suggests an inappropriate arrangement of atoms and violates the principles of chemical bonding and electron configuration.
Learn more about violates from below link
https://brainly.com/question/30039274
#SPJ11
This question has multiple parts. Work all the parts to get the most points. A solution was prepared by dissolving 1190mg of K
3
Fe(CN)
0
(329.2 g/mol) in sufficient water to give 710 mL. Calculate (a) the molar analytical concentration of K
3
Fe(CN)
6
. Molar analytical concentration = the molar concentration of K
+
. Molar concentration = the molar concentration of Fe(CN)
6
3−
. Molar concentration = ×M Incorrect Incorrect (b) the weight/volume percentage of K
3
Fe(CN)
0
. Weight/volume percentage - %(w/v) the number of millimoles of K
+
in 46.0 mL of this solution. mmol ppm Fe(CN)
6
3−
ppm
Answers
(a) The molar analytical concentration of K₃Fe(CN)₆ is 0.01524 M.
(b) The weight/volume percentage of K₃Fe(CN)₀ is approximately 23.57%.
(a) To calculate the molar analytical concentration of K₃Fe(CN)₆, we need to find the molar concentration of K⁺.
First, let's convert the mass of K₃Fe(CN)₆ to moles:
Mass of K₃Fe(CN)₆ = 1190 mg = 1.190 g
Moles of K₃Fe(CN)₆ = (mass of K₃Fe(CN)₆) / (molecular weight of K₃Fe(CN)₆)
= 1.190 g / 329.2 g/mol
= 0.003612 mol
Next, let's calculate the molar analytical concentration of K⁺:
Molar analytical concentration of K⁺ = (moles of K⁺) / (volume of solution in L)
= (3 * moles of K₃Fe(CN)₆) / (volume of solution in L)
= (3 * 0.003612 mol) / 0.710 L
= 0.01524 M
Therefore, the molar analytical concentration of K₃Fe(CN)₆ is 0.01524 M.
(b) To calculate the weight/volume percentage of K₃Fe(CN)₀, we need to find the number of millimoles of K⁺ in 46.0 mL of the solution.
First, let's calculate the number of millimoles of K⁺ in the entire solution:
Number of moles of K⁺ = (moles of K⁺) = 3 * (moles of K₃Fe(CN)₆)
Number of millimoles of K⁺ = (number of moles of K⁺) * 1000
= (3 * 0.003612 mol) * 1000
= 10.836 mmol
Next, let's calculate the weight/volume percentage of K₃Fe(CN)₀:
Weight/volume percentage of K₃Fe(CN)₀ = (number of millimoles of K⁺) / (volume of solution in mL) * 100%
= (10.836 mmol) / (46.0 mL) * 100%
≈ 23.57%
Therefore, the weight/volume percentage of K₃Fe(CN)₀ is approximately 23.57%.
Learn more about molar concentration here:
https://brainly.com/question/21841645
#SPJ11
What is the molar concentration of sodium chloride (Formula Weight: 58.44 g/mole in a 15%(w/v) solution?
Answers
The molar concentration of sodium chloride in a 15% (w/v) solution is 0.00257 M.
To determine the molar concentration of sodium chloride in a 15% (w/v) solution, we need to convert the percentage concentration to grams per liter (g/L).
A 15% (w/v) solution means that 15 grams of sodium chloride is dissolved in 100 mL (or 0.1 L) of solution.
First, we calculate the mass of sodium chloride in the solution:
Mass of sodium chloride = 15% of 0.1 L = 0.15 * 0.1 L = 0.015 g
Next, we convert the mass of sodium chloride to moles using the formula weight:
Moles of sodium chloride = Mass of sodium chloride / Formula weight
Moles of sodium chloride = 0.015 g / 58.44 g/mol = 0.000257 mol
Finally, we calculate the molar concentration by dividing the moles by the volume in liters:
Molar concentration of sodium chloride = Moles of sodium chloride / Volume of solution
Molar concentration of sodium chloride = 0.000257 mol / 0.1 L = 0.00257 M
Therefore, the molar concentration of sodium chloride in a 15% (w/v) solution is 0.00257 M.
Learn more about molar concentration here:
https://brainly.com/question/21841645
#SPJ11
Find Δ
r
H for the combustion of naphthalene at 298 K. When considering phase, assume all reactants and products are at 298 K Express your answer using four significant figures.
Answers
ΔrH for the combustion of naphthalene at 298 K is to use the heat of formation values for naphthalene and the combustion products, which are carbon dioxide and water.
you need to know the standard enthalpy of formation (ΔfH) for each compound. The given values at 298 K are:ΔfH(C10H8) = 79.2 kJ/molΔfH(CO2) = -393.5 kJ/molΔfH(H2O) = -285.8 kJ/mol
Plugging in the values, we have:ΔrH = (10 * -393.5 kJ/mol) + (4 * -285.8 kJ/mol) - (1 * 79.2 kJ/mol) - (12.5 * 0 kJ/mol)Simplifying, we get:the heat of formation values for naphthalene and the combustion products, which are carbon dioxide and water.
TO know more about that combustion visit:
https://brainly.com/question/31123826
#SPJ11
the change in enthalpy (ΔH) for the combustion of naphthalene at 298 K is -5152.3 kJ/mol.
The change in enthalpy (ΔH) for the combustion of naphthalene at 298 K can be determined using Hess's Law and the enthalpy of formation values.
First, let's write the balanced equation for the combustion of naphthalene:
C10H8 + 12.5O2 → 10CO2 + 4H2O
To find ΔH, we need to consider the enthalpies of formation (ΔHf) for each compound involved. The ΔHf values are given as follows:
ΔHf(C10H8) = 78.0 kJ/mol
ΔHf(CO2) = -393.5 kJ/mol
ΔHf(H2O) = -285.8 kJ/mol
Now, we can calculate ΔH for the combustion reaction:
ΔH = Σ(ΔHf(products)) - Σ(ΔHf(reactants))
ΔH = [10 × ΔHf(CO2) + 4 × ΔHf(H2O)] - [ΔHf(C10H8) + 12.5 × ΔHf(O2)]
Substituting the given values, we get:
ΔH = [10 × (-393.5 kJ/mol) + 4 × (-285.8 kJ/mol)] - [78.0 kJ/mol + 12.5 × 0 kJ/mol]
Calculating this expression, we find:
ΔH = -5152.3 kJ/mol
Therefore, the change in enthalpy (ΔH) for the combustion of naphthalene at 298 K is -5152.3 kJ/mol.
learn more about enthalpy
https://brainly.com/question/32882904
#SPJ11
In the phosphate buffer system containing K2HPO4 and KH2PO4, what is the weak acid? What is its conjugate base?
Answers
KH2PO4 is the weak acid, and K2HPO4 is its conjugate base in the phosphate buffer system.
In the phosphate buffer system containing K2HPO4 and KH2PO4, the weak acid is KH2PO4, which is also known as dihydrogen phosphate. The conjugate base is K2HPO4, which is also known as hydrogen phosphate.
When KH2PO4 acts as an acid, it donates a proton (H+) and forms the conjugate base, K2HPO4. Conversely, when K2HPO4 acts as a base, it accepts a proton and forms the weak acid, KH2PO4.
Therefore, KH2PO4 is the weak acid, and K2HPO4 is its conjugate base in the phosphate buffer system.
To know more about phosphate refer here:
https://brainly.com/question/2426918#
#SPJ11
Predict the products of the following reaction. If no reaction will occur, use the NO REACTION button. Be sure your chemical equation is balanced! CH
3
(CH
2
)
4
CH
3
(l)+O
2
( g)→
Answers
The predicted products of the given reaction are carbon dioxide. [tex](CO2)[/tex]and water[tex](H2O).[/tex]
The given reaction involves the combustion of a hydrocarbon, specifically. [tex]CH3(CH2)4CH3,[/tex] also known as pentane. When hydrocarbons undergo combustion with oxygen, the general reaction is as follows:
Hydrocarbon + Oxygen → Carbon Dioxide + Water
Applying this reaction to pentane [tex](CH3(CH2)4CH3)[/tex] and oxygen (O2), we can write the balanced equation:
[tex]CH3(CH2)4CH3 + 11O2 → 8CO2 + 10H2O[/tex]
Therefore, the predicted products of the given reaction are carbon dioxide (CO2) and water (H2O).
Learn more about Carbondioxide from the given link!
https://brainly.com/question/19886129
#SPJ11
A glass marble whose height is 0.6 N g= falls from a height of 16 m and rebounds to a height of 10 , the marble and floor remains in contact for 0.3 second, the value of impulse and average force between the marble and floor respectively is :
Answers
Height of glass marble = 16 m, Height to which marble rebounds = 10 m, Duration of contact = 0.3 s, Weight of glass marble = 0.6 N (given), Acceleration due to gravity = g = 9.8 m/s²
Impulse: Impulse is the change in momentum, and it is calculated as:
Impulse = change in momentum
∆p = mv-mu
Where, mv = final momentum of the marble
mu = initial momentum of the marble
m = mass of the marble
The marble is falling freely from a height of 16m.
The initial velocity, u = 0m/s since it is at rest.
Using the equation for velocity due to gravity, we can find the final velocity:
v² = u² + 2gsv²
= 0 + 2 × 9.8 × 16v
= 17.888 m/s
Substituting the values,
∆p = mv - mum = 0.6/9.8 = 0.0612 kgv = 17.888 m/su = 0 m/s
Impulse = ∆p = mv - mu
= 0.0612 × 17.888 - 0 × 0
= 1.095 Ns
Now, let's calculate the average force.
Average force: Average force is given by the formula:
F = ∆p / t
Where, ∆p = impulse obtained in the previous step.
t = time duration of contact
Substituting the values,
F = 1.095 / 0.3F = 3.65 N
Therefore, the value of impulse between the marble and the floor is 1.095 Ns, and the value of the average force between the marble and the floor is 3.65 N.
To know more about impulse, visit:
https://brainly.com/question/30466819
#SPJ11
A titanium cube contains 6.82×10
23
atoms. What is the edge length ( 5 ) of the cube? The density of titanium is 4.50 g/cm
3
. (Vcube =b
3
)
Answers
To find the edge length of the titanium cube, we can use the formula for the volume of a cube. The volume of a cube is equal to the edge length cubed. Given that the number of atoms in the cube is 6.82×10^23 and the density of titanium is 4.50 g/cm^3, we can calculate the mass of the cube using the formula:
volume = edge length^3We can rearrange the formula to solve for the edge length:edge length = cube root of volume
By substituting the value of the volume into the formula, we get:edge length = cube root of 0.25 cm^3By calculating the cube root of 0.25 cm^3, we find:
edge length ≈ 0.63 cmTherefore, the edge length of the titanium cube is approximately 0.63 cm.
TO know more about thattitanium visit:
https://brainly.com/question/32424448
#SPJ11
Which of the acids below would have the weakest conjugate base? A) CH
4
pK
a
=48 B) CH
3
CO
2
HpK=4.75 C) ClCH
2
CO
2
HpK=2.81 D) Cl
2
CHCO
2
HpK
a
=1.29 E) CH
3
CH
2
OHpK
a
=18 2. What is the stronger base in the following reaction if the equilibrium constant is approximately 10
8
(very large, equilibrium lies to the right side of reaction). HC≡CH+Θ
NH
2
⇌HC≡C+NH
3
3. What is the role of diethyl ether in the following reaction? a) Lewis acid b) Lewis base c) Brønsted acid 4. Which pair of species are both acids in the following reaction? HCN+H
2
O⟹
−
CN+H
3
O
+
a) H
2
O and CN
−
b) H
3
O
+
and H
2
O c) HCN and H
3
O
+
d) HCN and CN
−
e) H
3
O
+
and CN
−
5. What is the role of NH
4
+
in the following reaction? a) acid b) base c) conjugate acid d) conjugate base
Answers
The acid that would have the weakest conjugate base would be option (A) CH4 with pKa=48, since the higher the pKa, the weaker the acid and the stronger the conjugate base.
option (C) conjugate acid is the correct answer.
Therefore, the lowest pKa, Cl2CHCO2 with pKa=1.29, would have the strongest conjugate base.2. The stronger base in the reaction is NH2- since the equilibrium constant Kc is large, indicating that the reaction lies to the right, and therefore, the products are favored over the reactants.3. The role of diethyl ether is as a Lewis base, which donates a pair of electrons to the boron atom in the boron trifluoride (BF3) molecule to form a coordinate covalent bond and stabilize the intermediate compound formed in the reaction.
Therefore, option (B) Lewis base is the correct answer.4. The pair of species that are both acids in the reaction is HCN and H2O, and they can donate a proton to form the hydronium ion (H3O+). Therefore, option (C) HCN and H3O+ is the correct answer.5. The role of NH4+ in the reaction would be as a conjugate acid, since it can accept a proton from the water molecule (H2O) to form the hydronium ion (H3O+).
To know more about conjugate base visit:-
https://brainly.com/question/30086613
#SPJ11
At room temperature, solid lithium phosphate (Li3PO4) dissolves in water up to a concentration of 0.04 g/dL. Once this concentration is attained the aqueous solution is said to be saturated and no further solid will dissolve. Which of the following concentrations of lithium phosphate are attainable in aqueous solution at room temperature? (Click on the drop-boxes and select "yes" or "no".) 30000 μg/L, 0.00050 g/cL ,40000 ng/mL, 4.0×1011 pg/dL, 0.00050 mg/μL
Answers
the attainable concentrations of lithium phosphate in aqueous solution at room temperature are:
- 0.003 g/dL
- 0.04 g/dL
To determine which of the given concentration of lithium phosphate are attainable in aqueous solution at room temperature, we need to convert all the concentrations to the same unit, which is g/dL.
Given:
Saturated concentration of Li3PO4 = 0.04 g/dL
Let's convert the given concentrations to g/dL:
1. 30000 μg/L = [tex]0.003 g/dL[/tex] (1 μg = 0.001 mg)
2. 0.00050 g/cL = [tex]0.05 g/dL[/tex] (1 cL = 10 mL)
3. 40000 ng/mL = [tex]0.04 g/dL[/tex] (1 ng = 0.001 μg)
4. 4.0×1011 pg/dL = [tex]0.4 g/dL[/tex] (1 pg = 0.001 ng)
5. 0.00050 mg/μL = [tex]5.0 g/dL[/tex] (1 mg = 1000 μg)
Now, let's compare these concentrations to the saturated concentration of Li3PO4 (0.04 g/dL):
1. 0.003 g/dL - Yes (attainable)
2. 0.05 g/dL - No (higher than the saturated concentration)
3. 0.04 g/dL - Yes (saturated concentration)
4. 0.4 g/dL - No (higher than the saturated concentration)
5. 5.0 g/dL - No (higher than the saturated concentration)
Therefore, the attainable concentrations of lithium phosphate in aqueous solution at room temperature are:
- 0.003 g/dL
- 0.04 g/dL
So, the correct answers are:
- 30000 μg/L: No
- 0.00050 g/cL: No
- 40000 ng/mL: Yes
- 4.0×1011 pg/dL: No
- 0.00050 mg/μL: No
To know more about concentration visit:
brainly.com/question/29276511
#SPJ11
Help fast please
Which set of products is correct for
this double replacement reaction?
CuSO4 (aq) + NH4OH(aq) →
Remember that each formula must have a
balanced charge.
A. Cu(OH) (s) + (NH4)2SO4(aq)
B. CuOH(s) + NH.SO.(aq)
C. Cu(OH) (aq) + (NH4)2SO4(aq)
D. CuOH(aq) + NH.SO4(s)
Answers
The double replacement reaction can be shown by option labelled A
What is a double replacement reaction?The positive and negative ions of two different compounds swap positions in a chemical reaction known as a double replacement reaction, often referred to as a double displacement reaction or metathesis reaction, creating two new compounds. In order to create new ion combinations, the cations and anions in the reactants switch partners.
A double replacement reaction can be represented generally as follows:
AD = CB + CD + AB
Here, cations (positively charged ions) A and C are represented, whereas anions (negatively charged ions) B and D are. In a reaction, two new compounds are created when the cation from one chemical joins the anion from another.
Learn more about double replacement:https://brainly.com/question/15193747
#SPJ1
