The amount of energy (in kJ/mole) that was converted to heat is 345 kJ/mol (rounded to three significant figures).
To find the energy that is converted to heat, we need to compare the energy of the absorbed light to the energy of the emitted light. The absorbed light has a wavelength of 320 nm = 320 × 10⁻⁹ m.
So:
E = hc/λ E = (6.626 × 10⁻³⁴ J·s) (3.00 × 10⁸ m/s) / (320 × 10⁻⁹ m) E = 1.85 × 10⁻¹⁸ J
The absorbed light has less energy than the emitted light. The difference in energy is converted to heat.
So:
ΔE = 3.81 × 10⁻¹⁷ J – 1.85 × 10⁻¹⁸ J
ΔE = 3.63 × 10⁻¹⁷ J
This is the energy that is converted to light. To convert this to energy per mole, we need to know the number of photons in one mole of the mineral. This can be calculated using Avogadro’s number:
N = 6.02 × 10²³ photons/mol
So the energy per mole is:
ΔE/mol = (3.63 × 10⁻¹⁷ J) (6.02 × 10²³ photons/mol) ΔE/mol = 2.19 × 10⁷ J/mol
To convert this to kJ/mol, we divide by 1000:
ΔE/mol = 2.19 × 10⁴ kJ/mol
Learn more about energy at:
https://brainly.com/question/28571352
#SPJ11
The energy that was not converted to light is converted to heat. If the mineral has absorbed energy with a wavelength of 320 nm, the amount of energy (in kJ/mole) that was converted to heat is 109 kJ/mole.
A fluorescent mineral absorbs "black light" from a mercury lamp. It then emits visible light with a wavelength 520 nm.
The energy not converted to light is converted into heat.
The energy absorbed by the mineral = 320 nm
We know that the frequency of the energy absorbed by the mineral is given by the formula: c = λv
Where:
c = speed of light (3.0 × 10⁸ m/s)
λ = wavelength of energy (in meters)
v = frequency of energy (in Hertz)
Therefore:
v = c/λ = 3.0 × 10⁸ m/s / 320 × 10⁻⁹ m = 9.375 × 10¹⁴ Hz
Now, the energy absorbed by the mineral (E) is given by the formula: E = hv
Where:
h = Planck's constant (6.626 × 10⁻³⁴ J s)v = frequency of energy (in Hertz)
Therefore:
E = hv = 6.626 × 10⁻³⁴ J s × 9.375 × 10¹⁴ Hz = 6.22 × 10⁻¹⁸ J/molecule
The mineral then emits visible light with a wavelength of 520 nm. The frequency of the emitted light is given by the formula: v = c/λ = 3.0 × 10⁸ m/s / 520 × 10⁻⁹ m = 5.769 × 10¹⁴ Hz
The energy emitted as light is given by the formula: E = hv = 6.626 × 10⁻³⁴ J s × 5.769 × 10¹⁴ Hz = 3.82 × 10⁻¹⁸ J/molecule
Therefore, the energy converted to heat is:ΔE = Energy absorbed - Energy emitted
ΔE = (6.22 - 3.82) × 10⁻¹⁸ J/moleculeΔE = 2.4 × 10⁻¹⁸ J/molecule
Now, to calculate the energy converted to heat in kJ/mol:2.4 × 10⁻¹⁸ J/molecule × (6.02 × 10²³ molecules/mol) / (1000 J/kJ) = 1.44 × 10⁻⁴ kJ/mole
Therefore, the amount of energy (in kJ/mole) that was converted to heat is 109 kJ/mole.
Learn more about the energy absorbed: https://brainly.com/question/32225615
#SPJ11
A car comes to a bridge during a storm and finds the bridge washed out. The driver must get to the other side, so he decides to try leaping it with his car. The side the car is on is 21.3 m above the river, whereas the opposite side is a mere 2.3 m above the river. The river itself is a raging torrent 54.0 m wide.what is the speed of the car just before it lands safely on the other side?
To solve this problem, we can use the principle of conservation of mechanical energy. Assuming there is no significant air resistance, the total mechanical energy of the car is conserved throughout its motion.
Let's consider the initial position of the car as the point where it takes off and the final position as the point where it lands safely on the other side of the river.
We can calculate the initial potential energy (PE1) and the final potential energy (PE2) of the car using the formula:
PE = mgh,
where m is the mass of the car, g is the acceleration due to gravity, and h is the height.The initial potential energy (PE1) is converted into the final potential energy (PE2) and the kinetic energy (KE) of the car when it lands on the other side of the river.
To know more about energy visit :
https://brainly.com/question/1932868
#SPJ11
"An arrow is shot from a height of 1.70 m toward a cliff. It is
shot with a velocity of 31.0 m/s at an angle of 64.0º above the
ground. It lands on the top edge of the cliff 4.10 s later. What is
the height of the cliff?
The height of the cliff is approximately 35.23 meters. To determine the height of the cliff, we can use the kinematic equations of motion and break down the motion of the arrow into horizontal and vertical components.
First, let's calculate the vertical component of the arrow's initial velocity:
Vertical Velocity = Initial Velocity * sin(angle)
Vertical Velocity = 31.0 m/s * sin(64.0º)
Vertical Velocity ≈ 27.37 m/s
Time to Highest Point = Vertical Velocity / Acceleration due to Gravity
Time to Highest Point ≈ 27.37 m/s / 9.8 m/s²
Time to Highest Point ≈ 2.79 s
Time from Highest Point to Cliff = Total Time - Time to Highest Point
Time from Highest Point to Cliff = 4.10 s - 2.79 s
Time from Highest Point to Cliff ≈ 1.31 s
Vertical Distance = (Vertical Velocity * Time) + (0.5 * Acceleration due to Gravity * Time²)
Vertical Distance = (27.37 m/s * 1.31 s) + (0.5 * 9.8 m/s² * (1.31 s)²)
Vertical Distance ≈ 35.23 m
To know more about cliff refer here:
https://brainly.com/question/25700580#
#SPJ11
what is the magnitude of i3i3 ? express your answer to two significant figures and include the appropriate units.
The magnitude of i3i3 is 1.00.
In mathematics, the term magnitude refers to the size or extent of a quantity. Magnitude is used to describe the amount of an object, such as the length of a line, the weight of an object, or the size of a number. When we talk about the magnitude of a number, we are referring to the size or absolute value of that number.
The question is asking for the magnitude of i3. i is the imaginary unit, which is defined as the square root of -1. When we take i to the power of 3, we get:i3 = i * i * i = -i
To find the magnitude of -i, we take the absolute value of -i, which is equal to 1. Therefore, the magnitude of i3 is 1. Expressed to two significant figures, the magnitude of i3 is 1.00. There are no units associated with the magnitude of a number, as it refers only to the size or extent of the number.
To know more about magnitude visit:
https://brainly.com/question/31022175
#SPJ11
find the cosine of the angle between the vectors ⟨1,1,1⟩ and ⟨6,−10,11⟩.
The cosine of the angle between the vectors ⟨1, 1, 1⟩ and ⟨6, -10, 11⟩ is 7 / (√3)(√257). we can use the dot product formula.
To find the cosine of the angle between two vectors, we can use the dot product formula.
The dot product of two vectors A and B is given by:
A · B = |A| |B| cos(θ)
Where A · B represents the dot product, |A| and |B| are the magnitudes of the vectors A and B respectively, and θ is the angle between the two vectors.
Given the vectors A = ⟨1, 1, 1⟩ and B = ⟨6, -10, 11⟩, we can calculate their dot product as follows:
A · B = (1)(6) + (1)(-10) + (1)(11) = 6 - 10 + 11 = 7
Now, we need to calculate the magnitudes of vectors A and B:
|A| = √(1^2 + 1^2 + 1^2) = √3
|B| = √(6^2 + (-10)^2 + 11^2) = √(36 + 100 + 121) = √257
Now, we can substitute the values into the formula:
A · B = |A| |B| cos(θ)
7 = (√3) (√257) cos(θ)
Dividing both sides by (√3)(√257), we get:
cos(θ) = 7 / (√3)(√257)
Therefore, the cosine of the angle between the vectors ⟨1, 1, 1⟩ and ⟨6, -10, 11⟩ is 7 / (√3)(√257).
To learn more about dot product click here
https://brainly.com/question/29097076
#SPJ11
the wave model can correctly provide all of these, but the bohr model fails for one. which of the following is evidence that the bohr model is incorrect because it fails?
The Bohr model of an atom failed to explain the spectral lines of more complex atoms. Therefore, the wave model can correctly provide all of these, but the Bohr model fails for one. The spectral lines are one of the key pieces of evidence that the Bohr model is incorrect because it fails to describe them.
explanation to support the above statement: The Bohr model of the atom is no longer an accurate representation of an atom. Although it works for simple atoms such as hydrogen, more complex atoms cannot be described by the Bohr model. Electrons in atoms have wave-like and particle-like characteristics. This implies that they have both energy and momentum. To locate an electron within an atom, scientists must employ mathematical functions that describe the electron's probability of being in a particular region of the atom. The Bohr model fails to explain the spectral lines of more complex atoms. The Bohr model is unable to explain the phenomenon of spectral lines in more complex atoms, which is one of the most important reasons for its failure. When elements are exposed to energy, such as light or electricity, their atoms emit light at particular wavelengths. These wavelengths create the atom's unique spectral lines. Electrons emit energy when they move from a higher energy level to a lower one. The wavelengths of the emitted radiation can be used to determine the difference in energy between the two energy levels. The Bohr model was unable to clarify these spectral lines because it did not include the possibility of energy transitions from other energy levels.
to know more about wave model visit:
https://brainly.com/question/31965738
#SPJ11
1. Your friend tells you that the time-dependence of their car's acceleration along a road is given by a(t) = yt² + yt, where is some constant value. Why must your friend be wrong? (10 points) 2. A p
Your friend must be wrong because the time-dependence of acceleration is given by the derivative of velocity with respect to time, not the time itself. The equation a(t) = yt² + yt does not represent the correct relationship between acceleration and time.
Acceleration is defined as the rate of change of velocity with respect to time. In mathematical terms, it is the derivative of velocity with respect to time, denoted as a(t) = dV/dt. Therefore, the equation a(t) = yt² + yt provided by your friend does not represent the correct relationship between acceleration and time.
To determine the correct relationship, we need to integrate the equation for acceleration to obtain the velocity function. Given that a(t) = yt² + yt, integrating both sides with respect to time gives V(t) = (1/3)yt³ + (1/2)yt² + C, where C is the constant of integration. However, this equation represents the velocity as a function of time, not the acceleration.
Your friend's equation a(t) = yt² + yt for the time-dependence of acceleration is incorrect. Acceleration is the derivative of velocity with respect to time, not a function of time itself. The correct relationship can be obtained by integrating the acceleration equation, yielding the velocity as a function of time.
To know more about acceleration visit:
https://brainly.com/question/605631
#SPJ11
The switch in a series RL circuit with a resistance of 2.8 inductance of 4.6 h and voltage of 19.9 v is closed at t=0.3s What is the maximum current in the circuit?
Therefore the maximum current in the circuit is 7.11A.
A series RL circuit includes a resistor and an inductor. The behavior of an RL circuit when a switch is closed can be determined by applying Kirchhoff's voltage law (KVL).
The voltage drops across the resistor and inductor must add up to the voltage source. The maximum current in the circuit can be calculated using Ohm's law and Kirchhoff's voltage law.
Kirchhoff's voltage law can be expressed as follows:
VL = VR + VL
Where VL is the voltage drop across the inductor, VR is the voltage drop across the resistor, and V is the voltage source.
Since the circuit is purely resistive and inductive, the voltage across the inductor and resistor can be calculated as follows:
VR = IRRL where IR is the current flowing through the resistor, and RL is the resistor's resistance.
VL = XL/dt where XL is the inductor's inductance and dt is the time difference between t = 0 and t = 0.3s.
When the switch is first closed, the current through the inductor is zero. At t = 0, the current starts to increase in the inductor until it reaches its maximum value at time t = infinity.
The maximum current in the circuit is found by calculating the steady-state current.
The steady-state current, IS can be calculated as follows:
IS = V/RL
where V is the voltage source.
The voltage source is given as 19.9V.
The resistance of the circuit, RL is given as 2.8 ohms.
Therefore,
IS = V/RL
= 19.9/2.8
= 7.11A
The maximum current in the circuit is 7.11A.
To know more about resistance visit:
https://brainly.com/question/14547003
#SPJ11
a sound wave with an intensity level of 60 db is incident on a circle with a 0.3 cm diameter for 10 hours. how many joules of energy is delivered to this circle over this time period?
The energy delivered by a sound wave with an intensity level of 60 dB incident on a circle with a 0.3 cm diameter for 10 hours is 4.97×10⁻⁷ J.
The sound intensity (I) is the sound power (P) per unit area (A). It is given by the formula,`I=P/A`where `I` is in watts/m². We have to convert dB to watts/m² to use this formula.The formula for sound intensity level (L) in dB is`L=10log(I/I₀)`where `I₀` is the threshold of hearing = 1.0 × 10⁻¹² W/m².For `L=60 dB` we get,I = `I₀ 10^(L/10)`= 1.0 × 10⁻¹² × 10⁶ = 1.0 × 10⁻⁶ W/m².Area of the circle,`A= π r²`where `r = d/2` = 0.3/2 cm = 0.015 m.Area A = π (0.015 m)² = 7.07 × 10⁻⁴ m²The energy delivered E is given by the formula,`E = I × A × t`where `t = 10 hours` = 10 × 60 × 60 s = 36000 s.Substituting the values,`E = 1.0 × 10⁻⁶ × 7.07 × 10⁻⁴ × 36000 J`≈ 4.97×10⁻⁷ J.
To calculate the energy delivered by a sound wave with an intensity level of 60 dB incident on a circle with a 0.3 cm diameter for 10 hours, we use the formula`E = I × A × t`where`I = P/A``L = 10log(I/I₀)`and`A = π r²``r = d/2`We are given that the sound wave has an intensity level of 60 dB. We know that sound intensity level is given by the formula`L = 10log(I/I₀)`where `I₀` is the threshold of hearing, which is `1.0 × 10⁻¹² W/m²`. Rearranging the formula, we get`I = I₀ 10^(L/10)`Substituting the given values, we get`I = 1.0 × 10⁻¹² × 10^(60/10)`= 1.0 × 10⁻⁶ W/m²We are also given that the diameter of the circle is 0.3 cm. We can find the radius of the circle using the formula`r = d/2`which gives `r = 0.015 m`. Using the radius, we can find the area of the circle using the formula`A = π r²`which gives `A = 7.07 × 10⁻⁴ m²`.We are given that the time for which the sound wave is incident on the circle is 10 hours. We convert this to seconds by multiplying by 60 (minutes) and 60 (seconds) to get`t = 10 hours` = 10 × 60 × 60 s = 36000 sNow we can substitute the values in the formula`E = I × A × t`to get the energy delivered by the sound wave.`E = 1.0 × 10⁻⁶ × 7.07 × 10⁻⁴ × 36000 J`≈ 4.97×10⁻⁷ J.
To know more about intensity level visit :-
https://brainly.com/question/30101270
#SPJ11
A box of 55kg sits on the floor. If someone pulls up with a force of 50N at an angle of 20degrees, what is the normal force? You have to show your calculations to find the answer to receive credit.
The normal force acting on the box is approximately 521.9 N.
To find the normal force acting on the box, we need to consider the forces acting on it. In this case, we have the weight of the box and the vertical component of the pulling force.
The weight of the box is given by the formula: weight = mass * gravitational acceleration.
Given:
Mass of the box (m) = 55 kg
Gravitational acceleration (g) = 9.8 m/s^2
Weight of the box (W) = m * g
= 55 kg * 9.8 m/s^2
= 539 N
The vertical component of the pulling force (F_vertical) can be calculated using the formula: F_vertical = Force * sin(angle).
Given:
Force (F) = 50 N
Angle (θ) = 20 degrees
F_vertical = 50 N * sin(20°)
≈ 50 N * 0.342
≈ 17.1 N
Since the normal force (N) acts in the opposite direction to the vertical component of the pulling force, the normal force can be calculated by subtracting F_vertical from the weight of the box:
N = W - F_vertical
= 539 N - 17.1 N
= 521.9 N
Therefore, the normal force acting on the box is approximately 521.9 N.
To know more about force, visit
https://brainly.com/question/25239010
#SPJ11
what is the voltage response on the capacitor to closing the switch
The voltage response on the capacitor to closing the switch is an immediate change to the supply voltage.
When a switch is closed in a circuit containing a capacitor, the capacitor responds by rapidly charging or discharging to the supply voltage. Initially, before the switch is closed, the capacitor is uncharged, and there is no voltage across it. As soon as the switch is closed, a current starts flowing through the circuit, causing the capacitor to charge or discharge.
If the capacitor is uncharged and the supply voltage is higher than zero, the capacitor acts as an open circuit until it reaches its fully charged state. In this case, the voltage across the capacitor gradually increases over time until it reaches the supply voltage.
This charging process follows an exponential curve, and the rate at which the voltage across the capacitor increases is determined by the RC time constant, where R is the resistance in the circuit and C is the capacitance of the capacitor.
On the other hand, if the capacitor is already charged and the supply voltage is suddenly reduced to zero (by opening the switch), the capacitor acts as a source of energy, discharging through the circuit. The voltage across the capacitor gradually decreases over time until it reaches zero, following the exponential discharge curve.
Learn more about voltage response
brainly.com/question/32189716
#SPJ11
Vmax 14. Is the particle ever stopped and if so, when? 15. Does the particle ever turn around and reverse direction at any point and if so, when? 16. Describe the complete motion of the particle in ea
The complete motion of the particle is linear in all the quadrants of the coordinate plane.
Given Vmax is the maximum speed, the particle is never stopped. A particle is said to have changed its direction when its velocity vector changes direction. Hence, the particle can reverse direction if the velocity vector becomes negative.
Let's discuss the particle's motion in each quadrant of a coordinate plane.
1. Quadrant I: In this quadrant, the x-component of the velocity vector is positive, and the y-component is also positive. Hence, the velocity vector lies in this quadrant. Therefore, the particle moves in this direction. Hence, the particle's motion is linear in this quadrant.
2. Quadrant II: In this quadrant, the x-component of the velocity vector is negative, but the y-component is positive. The velocity vector lies in this quadrant. Therefore, the particle moves in this direction. Hence, the particle's motion is linear in this quadrant.
3. Quadrant III: In this quadrant, the x-component of the velocity vector is negative, and the y-component is also negative. The velocity vector lies in this quadrant. Therefore, the particle moves in this direction. Hence, the particle's motion is linear in this quadrant.
4. Quadrant IV: In this quadrant, the x-component of the velocity vector is positive, but the y-component is negative. The velocity vector lies in this quadrant. Therefore, the particle moves in this direction. Hence, the particle's motion is linear in this quadrant.
To know more about coordinate plane, refer to the link below:
https://brainly.com/question/28471473#
#SPJ11
A wheel with rotational inertia I is mounted on a fixed, fricitonless axle. The angular speed w of the wheel is increased from zero to w_f in a time interval T.
What is the average power input to the wheel during this time interval T?
a) Iw_f/2T
b_Iw_f^2/2T
c)Iw_f^2/2T^2
d)I^2w_f/2T^2
e)I^2w_f^2/2t^2
The average power input to the wheel during this time interval T is given by the expression: Iw_f^2/2T^2.The answer to the given problem is option C: `Iw_f^2/2T^2`.
Explanation: Given, Wheel with rotational inertia, I is mounted on a fixed, frictionless axle. Angular speed of the wheel is increased from zero to w_f in a time interval T.
Average power input to the wheel during the time interval T is to be determined. We know that the rotational kinetic energy of a rotating object is given by;KE = (1/2)Iω^2
Where,I = rotational inertiaω = angular speed of rotation of the object.To increase the angular speed of the wheel from zero to ω_f in a time T, a constant torque τ is applied to the wheel. Hence, we can write,τ = I(ω_f-0)/TAverage power output is given by;Pav = τω_f
Putting the value of τ, we get; Pav = (I(ω_f-0)/T) ω_fPav = (Iω_f^2)/TPav = (Iω_f^2)/(2T/2)Pav = Iω_f^2/2T^2
Hence, the average power input to the wheel during this time interval T is given by the expression: Iw_f^2/2T^2.
To learn more about inertia visit;
https://brainly.com/question/3268780
#SPJ11
A 29.0nC point charge is at the center of a 5.50 m ×5.50 m×5.50 m cube. What is the electric flux through the top surface of the cube? Express your answer in newton meters squared per coulomb.
Thus, the electric flux through the top surface of the cube is 2.48 × 10⁵ N.m²/C.
Given that:
A 29.0nC point charge is at the center of a 5.50 m ×5.50 m×5.50 m cube.
To find: Electric flux through the top surface of the cube
We know that Electric flux is given as:
ϕ = E.A
Where,ϕ = Electric flux
E = Electric field
A = Area of the surface
Let's consider the top surface of the cube
Electric field due to point charge is given as:
E = k * (q/r²)
Where,k = Coulomb's constant = 9 × 10^9 N.m²/C²
q = point charge = 29 × 10^-9 C (in C)
r = Distance between point charge and surface = 5.5/2 = 2.75m (in m)
Therefore,E = (9 × 10^9) * [(29 × 10^-9) / (2.75)²]E = 8.19 × 10^3 N/C
Now, the area of the surface is given as:
A = side² = 5.5² = 30.25 m²
Therefore,
Electric flux through the top surface of the cube is given as:
ϕ = E.Aϕ = 8.19 × 10³ × 30.25ϕ = 2.48 × 10⁵ N.m²/C
Thus, the electric flux through the top surface of the cube is 2.48 × 10⁵ N.m²/C.
To know more about electric flux visit:
https://brainly.com/question/14544020
#SPJ11
Three small lamps, R1 = 4.8 ,
R2 = 3.1 , and R3 =
2.4 are connected to a 9.0 V battery, as shown
below.
(a) What is the equivalent resistance of the circuit?
(b) What is the current in the battery?
(a) The equivalent resistance of the circuit is approximately 1.06 Ω.
(b) The current in the battery is approximately 8.49 A.
To find the equivalent resistance of the circuit, we can use the formula for resistors connected in parallel:
1/Req = 1/R1 + 1/R2 + 1/R3
R1 = 4.8 Ω
R2 = 3.1 Ω
R3 = 2.4 Ω
(a) Calculating the equivalent resistance:
1/Req = 1/4.8 Ω + 1/3.1 Ω + 1/2.4 Ω
To add the fractions, we need a common denominator:
1/Req = (3.1 * 2.4 + 4.8 * 2.4 + 4.8 * 3.1) / (4.8 * 3.1 * 2.4) Ω
1/Req = (7.44 + 11.52 + 14.88) / (4.8 * 3.1 * 2.4) Ω
1/Req = 33.84 / 35.904 Ω
Taking the reciprocal of both sides:
Req = 35.904 / 33.84 Ω
Req ≈ 1.06 Ω (rounded to two decimal places)
Therefore, the equivalent resistance of the circuit is approximately 1.06 Ω.
(b) To find the current in the battery, we can use Ohm's Law:
I = V / Req
V (battery voltage) = 9.0 V
I = 9.0 V / 1.06 Ω
I ≈ 8.49 A (rounded to two decimal places)
Therefore, the current in the battery is approximately 8.49 A.
(a) The equivalent resistance of the circuit is approximately 1.06 Ω.
(b) The current in the battery is approximately 8.49 A.
To know more about Resistance, visit
brainly.com/question/17563681
#SPJ11
name the seven processes used to improve the quality of water.
Water is an essential natural resource for all living beings, which requires proper maintenance and enhancement. The seven processes used to improve the quality of water are as follows: Screening, Flocculation and sedimentation, Filtration, Disinfection, Reverse Osmosis, Ultraviolet Treatment, and Activated Carbon Treatment.
Water quality control is a method of assessing water quality, determining if it is safe for consumption or environmental reasons. The process of water quality control includes multiple processes like screening, flocculation and sedimentation, filtration, disinfection, reverse osmosis, ultraviolet treatment, and activated carbon treatment.
The screening process includes removing large debris from the water, such as rocks, sand, or garbage. Flocculation and sedimentation are done to separate water from the particles and improve the settling speed. The process of filtration includes water passing through a filter, either a physical or chemical filter, and separating impurities and other particles in water.
Disinfection is a process to remove all microorganisms that could lead to waterborne illnesses. Reverse osmosis, ultraviolet treatment, and activated carbon treatment are other processes used to remove or reduce the impurities and toxic elements present in the water.
The conclusion is that these seven processes are commonly used to improve water quality.
To know more about Activated Carbon Treatment visit:
brainly.com/question/29724447
#SPJ11
vector a⃗ has a magnitude of 6.0 units and points in the negative x direction. vector b⃗ has a positive x component of 4.0 units and a positive y component of 8.0 units.
a) What is the angle between the vectors? b) Determine A⃗ ⋅B⃗ . (Dot product)
a) The angle between the vectors is 109.47 degrees b) The dot product A ⋅B is -12.0
Angle between the vectors: To determine the angle between the vectors, you need to use the dot product of the two vectors as follows: [tex]cosθ = \frac{a*b}{|a|*|b|}[/tex]
We know that vector a has a magnitude of 6.0 units and points in the negative x direction. Thus, we have a =−6î
Similarly, vector b has a positive x component of 4.0 units and a positive y component of 8.0 units. Thus, we have b=4î+8ĵ
Therefore, the angle between the vectors is given as:
[tex]cosθ = \frac{a*b}{|a|*|b|}[/tex]
=[tex]\frac{(-6i)*(4i+8j)}{(6)(10)}[/tex]
=[tex]\frac{-24}{60}[/tex]
=−0.4
Therefore, θ=cos−1(−0.4)
=109.47 degrees b) A ⋅B . (Dot product)
The dot product of two vectors A and Bis given as follows:
A⋅B=|A||B|cosθ
We have determined the value of cosθ in the previous part as -0.4, and also given that the magnitude of vector a is 6.0 units. Therefore, we have the following:
[tex]A.B=(6.0)\sqrt{(4.0^{2}+8.0^{2}))(-0.4) }[/tex]
=(-12.0)
The magnitude and direction of a vector can be represented by a directed line segment. The endpoint of this line segment represents the vector's position and the length of the segment represents the vector's magnitude.
The cosine of the angle between the vectors is calculated using the dot product formula. The dot product of two vectors is calculated by multiplying the x and y components of the vectors and adding the products.
For more information on vectors kindly visit to
https://brainly.com/question/1511269
#SPJ11
A Super Ball (an extremely elastic ball with a high coefficient of restitution) is dropped on the ground from a height of 1.35 mm . The elastic nature of the ball means it bounces to 0.90 of its original height. The mass of the ball is 24 g .
a)
When the ball hits the ground, the floor exerts an impulse on it. What are the magnitude and direction of this impulse? (in kgm/s)
b)
What is the direction of the impulse?
(upwards or downwards)
a) The magnitude of impulse is 0.9mv and the direction of impulse is upwards When the ball hits the ground. b) Since the ball is bouncing upwards, the direction of impulse is upwards.
The magnitude and direction of impulse experienced by a ball can be determined using the law of conservation of momentum. According to this law, in the absence of any external force, the momentum of a system is conserved. The momentum of an object is defined as the product of its mass and velocity.
In this case, the ball is dropped from a height of 1.35 m, so its initial velocity is zero. When the ball hits the ground, it rebounds with a velocity of 0.9 times its original velocity. The change in momentum of the ball is therefore (m * 0.9v) - (m * 0) = 0.9mv, where m is the mass of the ball and v is its velocity.
The impulse experienced by the ball is equal to the change in momentum, so the magnitude of impulse is 0.9mv. Since the ball is bouncing upwards, the direction of impulse is upwards.b) As the ball is upward-bouncing, so direction of impulse is also upwards.
Know more about momentum here:
https://brainly.com/question/30677308
#SPJ11
find part b
A spring of negligible mass has force constant 1800 N/m Part A How far must the spring be compressed for an amount 3.40 J of potential energy to be stored in t? Express your answer using two significa
The spring must be compressed approximately 0.080 meters for 3.40 J of potential energy to be stored.
To find the distance the spring must be compressed for 3.40 J of potential energy to be stored, we can use the formula for potential energy stored in a spring: E = (1/2)kx²,
where E is the potential energy, k is the force constant of the spring, and x is the distance the spring is compressed.
Given k = 1800 N/m and E = 3.40 J, we can rearrange the formula to solve for x: x = sqrt((2E) / k). Plugging in the values, we have:
x = sqrt((2 * 3.40 J) / 1800 N/m).
Calculating this, we find:
x ≈ 0.080 m (rounded to two significant figures).
Therefore, the spring must be compressed approximately 0.080 meters for 3.40 J of potential energy to be stored.
The potential energy stored in a spring is given by the formula E = (1/2)kx², where E is the potential energy, k is the force constant of the spring, and x is the distance the spring is compressed. Rearranging this formula to solve for x, we get x = sqrt((2E) / k). Plugging in the given values, we can calculate the distance x. In this case, k = 1800 N/m and E = 3.40 J. Substituting these values into the equation and solving it, we find that x ≈ 0.080 m (rounded to two significant figures). This means that the spring must be compressed by approximately 0.080 meters in order to store 3.40 J of potential energy.
To learn more about potential energy here:
https://brainly.com/question/24284560
#SPJ11
A 50 kg cylinder with diameter of ,12 m has a cable wrapped around it with a force F of 9 newtons applied to the cable so that a point on the horizontal part of the cable accelerates to the left at 0.60 m/s2. What is the magnitude of the angular acceleration of the cylinder? What is the magnitude of the torque that the cable exerts on the cylinder? What is the magnitude of the force that you exert on the cable?
The magnitude of the force that you exert on the cable is 21 N.
Given Data:Diameter of cylinder, D = 12 m
Mass of cylinder, m = 50 kg
Force applied on cable, F = 9 N
Acceleration of point on the cable, a = 0.60 m/s²
To find:Angular acceleration, αTorque exerted on cylinder, τMagnitude of force that you exert on cable, F'
Formula Used:α = a/rWhere, r is the radius of cylinderτ = Fr Where, F is the force exerted on cylinderr = D/2 = 6 m [Diameter of cylinder, D = 12 m]
Substituting the given values in above formula,α = a/r= 0.60/6= 0.10 rad/s²
Therefore, the magnitude of the angular acceleration of the cylinder is 0.10 rad/s².
Torque exerted on cylinder,τ = Fr= 9 × 6= 54 Nm
Therefore, the magnitude of the torque that the cable exerts on the cylinder is 54 Nm.
Magnitude of force that you exert on cable, F'
From the free body diagram, we can write the following equation of motion:F - F' = maWhere, F is the force applied on the cable by you.Substituting the given values in above equation,9 - F' = 50 × 0.60= 30F' = 9 - 30= -21 N
Therefore, the magnitude of the force that you exert on the cable is 21 N.
Learn more about magnitude
brainly.com/question/28714281
#SPJ11
A 5.3 -thick layer of oil (n=1.46) is sandwiched between a 1.1cm -thick sheet of glass and a 2.1cm -thick sheet of polystyrene plastic (n=1.59) (1)How long (in ns) does it take light incident perpendicular to the glass to pass through this 8.5 cm-thick sandwich?
The time taken by light incident perpendicular to the glass to pass through this 8.5 cm-thick sandwich is 27.8 ns.
Using Snell's law:
When light is incident from the glass side,Angle of incidence, i1 = 0°
Refractive index of air, n1 = 1
Refractive index of glass, n2 = 1.46
Refractive index of oil, n3 = 1.46
Angle of refraction, r1 = arcsin[(n1 sin i1)/n2] = arcsin[(1 × sin 0°)/1.46] = 0°
Angle of incidence, i2 = arcsin[(n1 sin r1)/n3] = arcsin[(1 × sin 0°)/1.46] = 0°
Angle of refraction, r2 = arcsin[(n2 sin i2)/n3] = arcsin[(1.46 × sin 0°)/1.46] = 0°
Total deviation, δ = i1 + r1 - r2 = 0°
Time taken by light to pass through the entire sandwich = (total path length of the sandwich / velocity of light) = (13.8 / (3 × 10^10)) s= 4.6 × 10^−10 s= 0.46 ns
Time taken by light incident perpendicular to the glass to pass through the given sandwich = 2 × time taken by light to pass through the oil + time taken by light to pass through the glass + time taken by light to pass through the polystyrene= 2 × (path length for the ray of light traveling through the oil / velocity of light) + (path length for the ray of light traveling through the glass / velocity of light) + (path length for the ray of light traveling through the polystyrene / velocity of light)= (2 × 5.3 / (3 × 10^10)) + (1.1 / (3 × 10^10)) + (2.1 / (3 × 10^10)) s= 27.8 × 10^−9 s= 27.8 ns
Thus, the time taken by light incident perpendicular to the glass to pass through this 8.5 cm-thick sandwich is 27.8 ns.
Learn more about refraction at:
https://brainly.com/question/32573190
#SPJ11
The time taken by light incident perpendicular to the glass to pass through this 8.5 cm-thick sandwich is approximately 1.481 × 10⁻⁰ s. Given: Thickness of Oil, t₁ = 5.3 μm, Thickness of Glass, t₂ = 1.1 cm. Thickness of Polystyrene Plastic, t₃ = 2.1 cm. Refractive index of Oil, n₁ = 1.46. Refractive index of Polystyrene Plastic, n₂ = 1.59, Speed of light, c = 3 × 10⁸ m/s.
Total distance = Thickness of Glass + Thickness of Polystyrene Plastic + Thickness of Oil
In order to add these distances, we need to first convert all the distances to meters.
Thickness of Glass in meters = 1.1 cm = 1.1 × 10⁻² m
Thickness of Polystyrene Plastic in meters = 2.1 cm = 2.1 × 10⁻² m
Thickness of Oil in meters = 5.3 μm = 5.3 × 10⁻⁶ m
Now we can add these distances: Total distance = 1.1 × 10⁻² m + 2.1 × 10⁻² m + 5.3 × 10⁻⁶ m. Total distance = 0.0000345 m.
Now, we need to determine the speed of light in the oil and in the polystyrene plastic. We can use the formula : n = c/v where, n is the refractive index, c is the speed of light, and v is the speed of light in the given medium. Speed of light in oil :v₁ = c/n₁ v₁ = (3 × 10⁸ m/s) / 1.46v₁ = 2.054 × 10⁸ m/s. Speed of light in polystyrene plastic: v₂ = c/n₂v₂ = (3 × 10⁸ m/s) / 1.59v₂ = 1.887 × 10⁸ m/s. Now we can use the formula: v = d/t where, v is the speed of light in the given medium, d is the distance traveled by the light, and t is the time taken by the light. To calculate the time taken by the light to pass through the glass we can use: v = d/t.
Rearranging the formula we get: t = d/v. Now we need to determine the time taken by the light to pass through the glass, the oil, and the polystyrene plastic separately. Then we can add these times to get the total time taken by the light. Time taken by light to pass through the glass: t₂ = 1.1 × 10⁻² m / 2.998 × 10⁸ m/s t₂ = 3.668 × 10⁻¹¹ s.
Time taken by light to pass through the oil: t₁ = 5.3 × 10⁻⁶ m / 2.054 × 10⁸ m/s, t₁ = 2.579 × 10⁻¹⁴ s. Time taken by light to pass through the polystyrene plastic :t₃ = 2.1 × 10⁻² m / 1.887 × 10⁸ m/s, t₃ = 1.113 × 10⁻¹⁰ s. Total time taken by the light to pass through the sandwich: t = t₁ + t₂ + t₃ t = 2.579 × 10⁻¹⁴ s + 3.668 × 10⁻¹¹ s + 1.113 × 10⁻¹⁰ s. Adding the times we get: t = 1.481 × 10⁻¹⁰ s.
Therefore, the time taken by light incident perpendicular to the glass to pass through this 8.5 cm-thick sandwich is approximately 1.481 × 10⁻⁰ s.
To know more about light incident, refer
https://brainly.com/question/29728416
#SPJ11
An arrow is shot straight up in the air at an initial speed of 46.0 m/s. After how much time is the arrow heading downward at a speed of 7.00 m/s? $
An arrow is shot straight up in the air at an initial speed of 46.0 m/s after approximately 3.98 seconds, the arrow will be heading downward at a speed of 7.00 m/s.
To determine the time at which the arrow is heading downward at a speed of 7.00 m/s, we can use the kinematic equation:
v = u + at
Where:
v is the final velocity (7.00 m/s),
u is the initial velocity (46.0 m/s),
a is the acceleration (in this case, due to gravity and is approximately -9.8 [tex]m/s^2)[/tex],
and t is the time we want to find.
We can rearrange the equation to solve for time (t):
t = (v - u) / a
Plugging in the given values, we have:
t = (7.00 - 46.0) / -9.8
Calculating this, we find:
t ≈ (-39.0) / (-9.8)
t ≈ 3.98 seconds
For more such information on: speed
https://brainly.com/question/13943409
#SPJ8
select the correct answer. which behavior of light makes it possible for you to see a spectrum of colors in a spray of water on a sunny day? a. diffusion b. reflection c. refraction d. dispersion
The behavior of light that makes it possible to see a spectrum of colors in a spray of water on a sunny day is dispersion. it can be concluded that the behavior of light that makes it possible to see a spectrum of colors in a spray of water on a sunny day is dispersion.
Therefore, the correct option is "dispersion.
What is light?
Light is electromagnetic radiation that the human eye can see. It travels in a straight line and has both wave-like and particle-like characteristics. Different colors of light have different wavelengths, and visible light's wavelengths range from about 400 to 700 nanometers (nm).
What is dispersion?
When a beam of white light passes through a prism, the beam separates into its component colors. The separation of colors is due to the phenomenon of dispersion. The different colors of white light are refracted, or bent, to different degrees as they pass through the prism. Violet light has a shorter wavelength and is refracted more than red light, which has a longer wavelength.
Therefore, it can be concluded that the behavior of light that makes it possible to see a spectrum of colors in a spray of water on a sunny day is dispersion.
To learn more about dispersion, visit:
https://brainly.com/question/13265071
#SPJ11
← HW8: Chapter 8 Question 6 of 10 -/3 = 1 View Policies Current Attempt in Progress A car is traveling with a speed of 18.0 m/s along a straight horizontal road. The wheels have a radius of 0.340 m. If the car speeds up with a linear acceleration of 1.50 m/s² for 8.20 s, find the angular displacement of each wheel during this period. Number Units
The angular displacement of each wheel during the 8.20 s period of acceleration is approximately 50.8 radians.
To find the angular displacement of each wheel during the period of acceleration, we can use the kinematic equation relating linear acceleration, angular acceleration, and time.
The linear acceleration of the car is given as 1.50 m/s², and the time interval is 8.20 s. We are also given the radius of the wheels, which is 0.340 m.
First, let's calculate the final speed of the car using the equation:
v = u + at
where v is the final speed, u is the initial speed (18.0 m/s), a is the linear acceleration, and t is the time interval.
v = 18.0 m/s + (1.50 m/s²)(8.20 s)
v ≈ 30.3 m/s
Next, we can calculate the angular velocity of the wheels using the equation:
v = ωr
where ω is the angular velocity and r is the radius of the wheels.
ω = v / r
ω = 30.3 m/s / 0.340 m
ω ≈ 89.1 rad/s
Now, to find the angular displacement, we use the equation:
θ = ωt + (1/2)αt²
where θ is the angular displacement, ω is the initial angular velocity (which is zero since the wheels start from rest), α is the angular acceleration, and t is the time interval.
θ = (1/2)αt²
θ = (1/2)(1.50 m/s²)(8.20 s)²
θ ≈ 50.8 rad
Since each wheel rotates, the calculated angular displacement applies to each wheel.
For more such information on: angular displacement
https://brainly.com/question/12972672
#SPJ8
A 3.20-kg block starts from rest at the top of a 30.0° incline and slides a distance of 1.90 m down the incline in 2.00 s. (a) Find the magnitude of the acceleration of the block. .95 m/s² (b) Find the coefficient of kinetic friction between block and plane. .19 X Draw a careful free-body diagram of the forces acting on the block. (c) Find the friction force acting on the block. magnitude N direction up the incline (d) Find the speed of the block after it has slid 1.90 m. m/s
(a) The magnitude of the acceleration of the block is 0.95 m/s².
(b) The coefficient of kinetic friction between the block and the plane is 0.19.
(c) The friction force acting on the block has a magnitude of 5.33 N and is directed up the incline.
(d) The speed of the block after sliding 1.90 m is 2.69 m/s.
(a) To find the magnitude of the acceleration, we can use the kinematic equation:
distance = (initial velocity * time) + (0.5 * acceleration * time²)
Plugging in the given values of distance = 1.90 m and time = 2.00 s, and considering the block starts from rest, we can solve for acceleration:
1.90 m = (0 * 2.00 s) + (0.5 * acceleration * (2.00 s)²
Simplifying the equation, we find:
acceleration = (1.90 m) / (0.5 * (2.00 s)²)
acceleration ≈ 0.95 m/s²
(b) The coefficient of kinetic friction can be determined using the equation:
friction force = (coefficient of friction) * (normal force)
In this case, the only force acting on the block in the direction of motion is the friction force. Therefore, we can equate the friction force to the product of the coefficient of kinetic friction and the normal force, which is equal to the weight of the block:
friction force = (coefficient of friction) * (mass * acceleration due to gravity)
Using the given mass of the block (3.20 kg) and the acceleration due to gravity (9.8 m/s²), we can solve for the coefficient of kinetic friction:
friction force = (coefficient of friction) * (3.20 kg * 9.8 m/s²)
5.33 N = (coefficient of friction) * (31.36 N)
Solving for the coefficient of kinetic friction, we find:
coefficient of kinetic friction ≈ 0.19
(c) The friction force acting on the block has a magnitude of 5.33 N and is directed up the incline. This is determined from the previous calculation.
(d) To find the speed of the block after sliding 1.90 m, we can use the equation:
final velocity² = (initial velocity)² + 2 * acceleration * distance
Since the block starts from rest, the initial velocity is 0. Plugging in the given values of acceleration = 0.95 m/s² and distance = 1.90 m, we can solve for the final velocity:
final velocity² = 0 + 2 * 0.95 m/s² * 1.90 m
final velocity² ≈ 3.61 m²/s²
Taking the square root of both sides, we find:
final velocity ≈ 2.69 m/s
Therefore, the speed of the block after sliding 1.90 m is approximately 2.69 m/s.
To know more about kinetic friction refer here:
https://brainly.com/question/30886698#
#SPJ11
Which of the following is the smallest object? A Neutron Star OA Red Drawf OA White Dwarf OA G-type Main-Sequence Star O The Earth
The smallest object among the options given is a White Dwarf.Among the given options, the smallest object is a White Dwarf. White dwarfs have a size comparable to that of Earth but with a much higher mass, making them incredibly dense and compact objects.
To determine the smallest object among the options, we need to understand the nature and size of each object.
A Neutron Star: Neutron stars are incredibly dense and compact objects that result from the collapse of massive stars. They have a very small radius, typically around 10 kilometers.
A Red Dwarf: Red dwarfs are small and relatively cool stars. They are the smallest type of main-sequence stars and have sizes ranging from about 0.1 to 0.5 times the radius of the Sun.
A White Dwarf: White dwarfs are the remnants of stars that have exhausted their nuclear fuel. They are extremely dense, with a size comparable to that of Earth but with a much higher mass.
A G-type Main-Sequence Star: G-type main-sequence stars, like our Sun, have sizes ranging from about 0.8 to 1.2 times the radius of the Sun.
The Earth: The Earth is a rocky planet with a radius of about 6,371 kilometers.
From the given options, the smallest object is a White Dwarf. While neutron stars are incredibly dense, their radius is still larger than that of a typical white dwarf. Red dwarfs and G-type main-sequence stars are larger than white dwarfs. The Earth, being a planet, is significantly larger than all the other options.
Among the given options, the smallest object is a White Dwarf. White dwarfs have a size comparable to that of Earth but with a much higher mass, making them incredibly dense and compact objects. This comparison is based on the known sizes and nature of each object, with neutron stars, red dwarfs, G-type main-sequence stars, and the Earth being relatively larger than white dwarfs.
To know more about White Dwarf ,visit:
https://brainly.com/question/31593675
#SPJ11
part a and b please
6) Problem 3: A charged particle (g- 7.5x 10-10 C) experiences a force of F-2.75i-2.8j N in an electric field. hepar 75177.0148 baldes Drith à 50% Part (a) Write an expression for the electric field
The expression for the electric field based on the given information is E = (2.75i + 2.8j) N/C.
The electric field (E) is a vector quantity that represents the force experienced by a charged particle at a given point in space. In this problem, the charged particle experiences a force of F = (2.75i - 2.8j) N in the electric field.
To find the electric field, we can use Coulomb's law, which states that the electric field is directly proportional to the force experienced by a charged particle and inversely proportional to the charge of the particle.
Since the force experienced by the particle is given as F = (2.75i - 2.8j) N, we can equate this force to the product of the electric field (E) and the charge (q) of the particle:
F = q * E
Rearranging the equation, we get:
E = F / q
Substituting the given values, we have:
E = (2.75i - 2.8j) N / (7.5x10^(-10) C)
Simplifying the expression, we obtain:
E = (2.75i + 2.8j) N/C
Therefore, the expression for the electric field based on the given information is E = (2.75i + 2.8j) N/C.
To know more about electric field refer here:
https://brainly.com/question/30544719#
#SPJ11
1_a : An object with mass 3.1 kg is pulled along a horizontal
surface by a force 5.2 N acting 37 degree above the horizontal.
Calculate the work done by this force when the object moves 1.6
m.
1_d: A
The work done by the force when the object moves 1.6 m is approximately 7.12 Joules
(a) To calculate the work done by a force on an object, we can use the formula:
Work = Force * Distance * cos(theta),
where Work is the work done, Force is the magnitude of the force, Distance is the distance over which the force acts, and theta is the angle between the force and the direction of motion.
Force (F): 5.2 N
Angle (theta): 37 degrees
Distance (d): 1.6 m
We need to convert the angle from degrees to radians to use it in the cosine function:
theta_radians = 37 degrees * (pi / 180 degrees).
Substituting the values into the formula, we have:
Work = 5.2 N * 1.6 m * cos(37 degrees * (pi / 180 degrees)).
Evaluating the expression, we find:
Work ≈ 7.12 J.
Therefore, the work done by the force when the object moves 1.6 m is approximately 7.12 Joules.
To know more about force visit:
https://brainly.com/question/25239010
#SPJ11
A 3.00 pF capacitor is connected in series with a 2.00 pF capacitor and a 360 V potential difference is applied across the pair. (a) What is the charge on each capacitor (in nc)? 3.00 pF capacitor 2.00 pF capacitor (b) What is the voltage across each capacitor (in V)? .00 pF capacitor 2.00 pF capacitor
The charge on the 3.00 pF capacitor is 1.08 nc and the charge on the 2.00 pF capacitor is 0.72 nc and the voltage across the 3.00 pF capacitor is 360 V and the voltage across the 2.00 pF capacitor is also 360 V.
(a) Charge stored on a capacitor is given by the equation Q=CV where Q is the charge, C is the capacitance, and V is the voltage. In this question, a 3.00 pF capacitor is connected in series with a 2.00 pF capacitor, therefore, their total capacitance will be C=1/[(1/3)+(1/2)] pF = 1.2 pF. Now, to find the charge on each capacitor, we will apply the formula Q=CV. For the 3.00 pF capacitor, the charge will be Q=3.00 × 10^-12 F × 360 V = 1.08 × 10^-9 C = 1.08 nc. Similarly, for the 2.00 pF capacitor, the charge will be Q=2.00 × 10^-12 F × 360 V = 7.20 × 10^-10 C = 0.72 nc. Therefore, the charge on the 3.00 pF capacitor is 1.08 nc and the charge on the 2.00 pF capacitor is 0.72 nc.
(b) In series combination, capacitors have the same charge on their plates, but different voltages across them. Voltage across each capacitor can be calculated by using the formula V=Q/C where Q is the charge on the capacitor and C is its capacitance. For the 3.00 pF capacitor, the voltage will be V=1.08 × 10^-9 C/3.00 × 10^-12 F = 360 V. For the 2.00 pF capacitor, the voltage will be V=0.72 × 10^-9 C/2.00 × 10^-12 F = 360 V. Therefore, the voltage across the 3.00 pF capacitor is 360 V and the voltage across the 2.00 pF capacitor is also 360 V.
To know more about capacitor visit :
https://brainly.com/question/31627158
#SPJ11
A steel railroad track has a length of 30.000m when the temperature is 0.0∘C, the ends of the rail are rigidly clamped at 0.0∘C so that expansion is prevented. The thermal stress set up in the rail if its temperature is raised to 40.0∘C is
The thermal stress set up in the rail when its temperature is raised to 40.0∘C can be calculated using the formula:
Thermal Stress = (Coefficient of Linear Expansion) * (Change in Temperature) * (Young's Modulus)
To calculate the thermal stress, we need to know the coefficient of linear expansion and Young's modulus of the steel rail. Let's assume the coefficient of linear expansion is α and Young's modulus is Y.
Given that the length of the rail is 30.000m and the temperature change is from 0.0∘C to 40.0∘C, the change in temperature is 40.0∘C - 0.0∘C = 40.0∘C.
Assuming we have the values for α and Y, we can substitute them into the formula to calculate the thermal stress.
Thermal Stress = α * (Change in Temperature) * Y
Please provide the values for the coefficient of linear expansion (α) and Young's modulus (Y) for the steel rail so that we can calculate the thermal stress accurately.
To know more about , thermal stress, click here https://brainly.com/question/13061569
#SPJ11
To make a secure fit, rivets that are larger than the rivet hole are often used and the rivet is cooled (usually in dry ice) before it is placed in the hole. A steel rivet 1.873 cm in diameter is to be placed in a hole 1.871 cm in diameter. To what temperature must the rivet be cooled if it is to fit in the hole (at 20°C)?
_____degrees celsius
To make a secure fit, rivets that are larger than the rivet hole are often used and the rivet is cooled (usually in dry ice) before it is placed in the hole. Thus, the rivet must be cooled to approximately 19°C to fit in the hole.
A steel rivet 1.873 cm in diameter is to be placed in a hole 1.871 cm in diameter. To what temperature must the rivet be cooled if it is to fit in the hole (at 20°C)?If the diameter of the rivet is larger than the diameter of the hole, then to make a secure fit, the rivet must be cooled before being placed in the hole.
To make sure that the rivet is fitted properly in the hole, the following formula can be used;
d = d1 + α(t)
where,
d = diameter of the rivet
d1 = diameter of the hole
t = the change in the temperature
α = coefficient of linear expansion of steel
Given that:
d = 1.873 cm
d1 = 1.871 cm
α = 1.20 × 10−5 K−1
We can find out the change in the temperature using the formula,
d − d1 = α
d1t => t
= (d − d1)/(αd1)t
= (1.873 − 1.871)/(1.20 × 10−5 × 1.871)
≈ 0.8917 × 105°C−1
Now we can calculate the temperature at which the rivet must be cooled, taking into account the fact that the current temperature is 20°C.
Temperature = 20°C − t
Temperature = 20°C − 0.8917 × 105°C−1
≈ 19.107°C≈ 19°C
Thus, the rivet must be cooled to approximately 19°C to fit in the hole.
To know more about diameter visit
https://brainly.com/question/31445584
#SPJ11