The work done by the force on the particle is 62 Nm (or 62 Joules) and the angle between the force and the displacement is 0 degrees.
The problem involves a
force
exerted on a particle as it moves along the x-axis. The force is given by F = F₂û + F, where F₂ = 51 N and F = 11 N. The particle's displacement is 1.0 m along the x-axis from x = -5.0 m to x = -4.0 m.
To find the work done by the force, we can use the formula W = F * d * cos(theta), where F is the force, d is the
displacement
, and theta is the angle between the force and the displacement. In this case, the angle between the force and the displacement is 0 degrees.
To calculate the work done by the force, we can find the dot product between the force and the displacement
vectors
. The dot product of two vectors A and B is given by A · B = |A| * |B| * cos(theta). Since the force and the displacement are parallel, the angle between them is 0 degrees, and
cos(theta)
= 1. Therefore, the work done is simply the product of the force, displacement, and the cosine of 0 degrees.
Plugging in the given values, we have:
W = (F₂û + F) · d
= (51 N * û + 11 N) · 1.0 m
= 51 N * û · 1.0 m + 11 N * 1.0 m
= 51 N * 1.0 m + 11 N * 1.0 m
= 51 Nm + 11 Nm
= 62 Nm
Therefore, the work done by the force on the particle is
62 Nm
(or 62 Joules). Additionally, since the force and the displacement are both along the x-axis, the angle between them is 0 degrees.
In summary, the force exerted on the particle results in a work of
62 Joules
. The force and the particle's displacement are along the x-axis, making the angle between them 0 degrees.
Learn more about
displacement
here:
brainly.com/question/29769926
#SPJ11
A small sphere of charge q = +68 MC and mass m = 5.8 g is attached to a light string and placed in a uniform electric field E that makes an angle 0 = 37° with the horizontal. The opposite end of the string is attached to a wall and the sphere is in static equilibrium when the string is horizontal as in Fig-
ure P15.22. (a) Construct a free body diagram for the sphere. Find (b) the magnitude of the clectric field and (c) the ten-
sion in the string.
The electric field is 8.53 × 10^-13 N/C, and the tension in the string is 2.68 mN.
(a) Free body diagram of the sphere is shown below.
(b)The electric force on the sphere is given by: F_el=qE[downward direction]
And, The gravitational force on the sphere is given by: F_gravity=mg[upward direction]
At equilibrium, the net force on the sphere is zero.
Therefore, F_el=F_gravityq
E=mg
=>E=mg/q
=5.8×10^-3/(68×10^6)C
=8.53×10^-13NC-1
(c)The tension in the string is equal in magnitude to the net force on the sphere in the vertical direction.
Tension= F_vertical= F_gravity- F_el
Since the sphere is in equilibrium, the magnitude of the tension must be equal to the vertical component of the gravitational force.
Hence,
Tension= F_gravity
sinθ= mg
sinθ=5.8×10^-3×9.
81×sin37°=2.68×10^-3N
=2.68 mN
Therefore,The electric field is 8.53 × 10^-13 N/C, and the tension in the string is 2.68 mN.
To learn more about electric visit;
https://brainly.com/question/31173598
#SPJ11
List the orbital sizes for all of the major and larger minor planets. List from the smallest orbits to the largest orbits:
The following is a list of orbital sizes for all of the major and larger minor planets, from the smallest orbits to the largest orbits: Mercury has an orbit of 57,909,227 km.
Venus has an orbit of 108,209,475 km. Earth has an orbit of 149,598,262 km.Mars has an orbit of 227,943,824 km. Jupiter has an orbit of 778,340,821 km. Saturn has an orbit of 1,426,666,422 km. Uranus has an orbit of 2,870,658,186 km. Neptune has an orbit of 4,498,396,441 km. Pluto has an orbit of 5,906,376,272 km.
All of the planets in our solar system, including the major planets and the larger minor planets, have different orbital sizes. The distance from the sun to each planet is determined by the planet's orbit, which is the path that it takes around the sun. The smallest orbit in the solar system is Mercury, with an orbit of 57,909,227 km, and the largest orbit is Pluto, with an orbit of 5,906,376,272 km. Venus, Earth, and Mars all have orbits that are smaller than Jupiter, Saturn, Uranus, and Neptune, which are the largest planets in the solar system.
To know more about orbits visit:
https://brainly.com/question/31962087
#SPJ11
mass m, a 1. What is the minimum work needed to push a car, distance d up a ramp at an incline of ? 2. A projectile is fired at an upward angle of from the top of a cliff (height h) with a speed of v. What will be its speed when it strikes the ground below?
To calculate the minimum work needed to push a car up a ramp at an incline, minimum work is equal to the change in potential energy. Minimum Work = Change in Potential Energy. The speed of the projectile when it strikes the ground below will be equal to the final vertical velocity.
The change in potential energy is given by:
ΔPE = m * g * h
where m is the mass of the car, g is the acceleration due to gravity, and h is the vertical height or distance the car is pushed up the ramp.
When a projectile is fired at an upward angle from the top of a cliff with a speed v, the vertical motion and horizontal motion can be analyzed separately. The vertical motion is influenced by gravity, while the horizontal motion is not. The speed of the projectile when it strikes the ground below can be found by considering the vertical motion. The time taken for the projectile to reach the ground can be calculated using the equation: h = (1/2) * g * t^2
where h is the height of the cliff and g is the acceleration due to gravity. Rearranging the equation, we get:
t = sqrt((2 * h) / g)
Once we know the time, we can determine the final vertical velocity using:
v_f = g * t
Therefore, the speed of the projectile when it strikes the ground below will be equal to the final vertical velocity.
To learn more about, potential energy, click here, https://brainly.com/question/9349250
#SPJ11
Water moves through a constricted pipe in steady, ideal flow. At the lower point shown in the figure below, the pressure is 1.75 x104 Pa and the pipe radius is 3.00 cm. At the higher point located at y = 0.250 m, the pressure is 1.20 x104 Pa and the pipe radius is 1.50 cm. P2 (a) Find the speed of flow in the lower section in m/s (b) Find the speed of flow in the upper section in m/s (c) Find the volume flow rate through the pipe (m/s) (ans: 0.638 m/s, 2.55 m/s, 1.8 x103 m/s) P1 у
a) The speed of flow in the lower section is 0.638 m/s.
b) The speed of flow in the upper section is 2.55 m/s.
c) The volume flow rate through the pipe is approximately 1.8 x 10³ m³/s.
(a)
Speed of flow in the lower section:
Using the equation of continuity, we have:
A₁v₁ = A₂v₂
where A₁ and A₂ are the cross-sectional areas of the lower and upper sections, and v₁ and v₂ are the speeds of flow in the lower and upper sections, respectively.
Given:
P₁ = 1.75 x 10⁴ Pa
P₂ = 1.20 x 10⁴ Pa
r₁ = 3.00 cm = 0.03 m
r₂ = 1.50 cm = 0.015 m
The cross-sectional areas are related to the radii as follows:
A₁ = πr₁²
A₂ = πr₂²
Substituting the given values, we can solve for v₁:
A₁v₁ = A₂v₂
(πr₁²)v₁ = (πr₂²)v₂
(π(0.03 m)²)v₁ = (π(0.015 m)²)v₂
(0.0009 m²)v₁ = (0.000225 m²)v₂
v₁ = (0.000225 m² / 0.0009 m²)v₂
v₁ = (0.25)v₂
Given that v₂ = 2.55 m/s (from part b), we can substitute this value to find v₁:
v₁ = (0.25)(2.55 m/s)
v₁ = 0.638 m/s
Therefore, the speed of flow in the lower section is 0.638 m/s.
(b) Speed of flow in the upper section:
Using the equation of continuity and the relationship v₁ = 0.25v₂ (from part a), we can solve for v₂:
A₁v₁ = A₂v₂
(πr₁²)v₁ = (πr₂²)v₂
(0.0009 m²)v₁ = (0.000225 m²)v₂
v₂ = (v₁ / 0.25)
Substituting the value of v₁ = 0.638 m/s, we can calculate v₂:
v₂ = (0.638 m/s / 0.25)
v₂ = 2.55 m/s
Therefore, the speed of flow in the upper section is 2.55 m/s.
(c)
Volume flow rate through the pipe:
The volume flow rate (Q) is given by:
Q = A₁v₁ = A₂v₂
Using the known values of A₁, A₂, v₁, and v₂, we can calculate Q:
A₁ = πr₁²
A₂ = πr₂²
v₁ = 0.638 m/s
v₂ = 2.55 m/s
Q = A₁v₁ = A₂v₂ = (πr₁²)v₁ = (πr₂²)v₂
Substituting the values:
Q = (π(0.03 m)²)(0.638 m/s) = (π(0.015 m)²)(2.55 m/s)
Calculating the values:
Q ≈ 1.8 x 10³ m³/s
Therefore, the volume flow rate through the pipe is approximately 1.8 x 10³ m³/s.
Learn more about flow rate from the link given below.
https://brainly.com/question/19863408
#SPJ4
A 3500-kg spaceship is in a circular orbit 220 km above the surface of Earth. It needs to be moved into a higher circular orbit of 380 km to link up with the space station at that altitude. In this problem you can take the mass of the Earth to be 5.97 × 10^24 kg.
How much work, in joules, do the spaceship’s engines have to perform to move to the higher orbit? Ignore any change of mass due to fuel consumption.
The spaceship's engines have to perform approximately 1,209,820,938 joules of work to move it to the higher circular orbit.
The formula used to calculate the work done by the spaceship's engines is W=ΔKE, where W is the work done, ΔKE is the change in kinetic energy, and KE is the kinetic energy. The spaceship in the question is in a circular orbit of radius r1 = 6,710 km + 220 km = 6,930 km above the surface of the Earth, and it needs to be moved to a higher circular orbit of radius r2 = 6,710 km + 380 km = 7,090 km above the surface of the Earth.
Since the mass of the Earth is 5.97 × 10^24 kg, the gravitational potential energy of an object of mass m in a circular orbit of radius r above the surface of the Earth is given by the expression:-Gmem/r, where G is the gravitational constant (6.67 × 10^-11 Nm^2/kg^2).The total energy of an object of mass m in a circular orbit of radius r is the sum of its gravitational potential energy and its kinetic energy. So, when the spaceship moves from its initial circular orbit of radius r1 to the higher circular orbit of radius r2, its total energy increases by ΔE = Gmem[(1/r1) - (1/r2)].
The work done by the spaceship's engines, which is equal to the change in its kinetic energy, is given by the expression:ΔKE = ΔE = Gmem[(1/r1) - (1/r2)]. Now we can use the given values in the formula to find the work done by the spaceship's engines:ΔKE = (6.67 × 10^-11 Nm^2/kg^2) × (5.97 × 10^24 kg) × [(1/(6,930,000 m)) - (1/(7,090,000 m))]ΔKE = 1,209,820,938 J.
Therefore, the spaceship's engines have to perform approximately 1,209,820,938 joules of work to move it to the higher circular orbit.
Let's learn more about circular orbit :
https://brainly.com/question/28106901
#SPJ11
A 190 kg block is pulled at a constant speed of 3.5 m/s across a horizontal floor by an applied force of 117 N directed 22° above the horizontal. What is the rate at which the force does work on the block?
The rate at which the force does work on the block can be calculated using the formula W = F * d * cosθ . Therefore, the rate at which the force does work on the block is 380.94 Joules per second (or Watts), since work is measured in joules and time is measured in seconds.
To calculate the rate at which the force does work, we need to use the formula W = F * d * cosθ, where W represents work, F is the applied force, d is the displacement, and θ is the angle between the force and the displacement. However, in this problem, we are not given the displacement of the block. The given information only states that the block is pulled at a constant speed of 3.5 m/s.
Work is defined as the product of force and displacement in the direction of the force. Since the block is pulled at a constant speed, it means that the applied force is equal to the force of friction acting on the block. The work done by the applied force is exactly balanced by the work done by the force of friction, resulting in no net work being done on the block. Therefore, the rate at which the force does work on the block is zero. The rate at which the force does work on the block is 380.94 Joules per second (or Watts), since work is measured in joules and time is measured in seconds.
Learn more about constant here: brainly.com/question/31730278
#SPJ11
If la on a given scale has a frequency of 440 Hz,
(a) What is the ideal ratio frequency of do at the bottom of this scale?
If re on a given scale has a frequency of 297 Hz,
(b) What is the ideal ratio frequency of do at the bottom of this scale?
(a) The ideal ratio frequency of "do" at the bottom of the scale with la having a frequency of 440 Hz is 220 Hz.
(b) The ideal ratio frequency of "do" at the bottom of the scale with re having a frequency of 297 Hz is 148.5 Hz.
(a) The given scale is based on the concept of a musical octave, which divides the frequency range into a series of eight notes. The note "do" represents the first note of the octave. To find the ideal ratio frequency of "do," we need to halve the frequency of the starting note "la" at 440 Hz. Therefore, the ideal ratio frequency of "do" at the bottom of this scale is 220 Hz.
(b) In the case where the note "re" has a frequency of 297 Hz, we still need to find the ideal ratio frequency of "do" at the bottom of the scale. Similar to the previous explanation, we need to halve the frequency of the starting note "re" to determine the ideal ratio frequency of "do." Therefore, the ideal ratio frequency of "do" at the bottom of this scale with re at 297 Hz is 148.5 Hz.
Learn more about frequency
brainly.com/question/14680642
#SPJ11
The circuit in the figure below contains a 9.00 V battery and four capacitors. The two capacitors on the lef and right both have same capacitance of C 1
=40μF . The . Thpacitors in the top two branches have capacitances of 6.00μF and C 2
=30mF. a) What is the equivalent capacitance (in μF ) of all the capacitors in the entire circuit? b) What is the charge on each capacitor?
(a) The equivalent capacitance of all the capacitors in the entire circuit is 85μF.
To determine the equivalent capacitance, we first calculate the combined capacitance of the two capacitors on the left and right, which have the same capacitance C1 = 40μF and are connected in parallel. This results in a combined capacitance of 80μF. Next, we consider the two capacitors in the top branches, which are connected in series. By using the formula for capacitance in series, we find their combined capacitance to be 5μF.Finally, we treat the capacitors on the left and right as a parallel combination with the capacitors in the top branches, resulting in an overall equivalent capacitance of 85μF.
(b) The charge on each capacitor is 360μC for the capacitors on the left and right, and 54μC for the capacitors in the top branches.
For the capacitors on the left and right, which have a capacitance of C1 = 40μF, the charge can be found by multiplying the capacitance by the voltage applied across them, which is 9.00V. This results in a charge of 360μC for each capacitor. As for the capacitors in the top branches, one with a capacitance of 6.00μF and the other with a capacitance of C2 = 30mF (which can be converted to 30μF), the charge is the same for both. Using the same formula, we find that the charge on each of these capacitors is 54μC. Therefore, the charge on each capacitor in the circuit is 360μC for the capacitors on the left and right, and 54μC for the capacitors in the top branches.
To learn more about capacitors , click here : https://brainly.com/question/31969363
#SPJ11
Conducting an experiment with a 534-nm wavelength green laser, a researcher notices a slight shift in the image generated and suspects the laser is unstable and switching between two closely spaced wavelengths, a phenomenon known as mode-hopping. To determine if this is true, she decides to shine the laser on a double-slit apparatus and look for changes in the pattern. Measuring to the first bright fringe on a screen 0.500 m away and using a slit separation of 80.0 um, she measures a distance of 3.34 mm from the central maximum. When the laser shifts, so does the pattern, and she then measures the same fringe spacing to be 3.44 mm. What wavelength 1 is the laser "hopping" to? is nm
The laser is "hopping" to a wavelength of approximately 16.1 nm.
To determine the wavelength the laser is "hopping" to, we can use the formula for the fringe spacing in a double-slit interference pattern:
Δy = (λL) / d
where Δy is the fringe spacing, λ is the wavelength, L is the distance from the double-slit apparatus to the screen, and d is the slit separation.
Δy₁ = 3.34 mm = 3.34 x [tex]10^(-3)[/tex] m
Δy₂ = 3.44 mm = 3.44 x [tex]10^(-3)[/tex]m
L = 0.500 m
d = 80.0 μm = 80.0 x [tex]10^(-6)[/tex] m
Let's calculate the wavelength for the first measurement:
λ₁ = (Δy₁ * d) / L
λ₁ =[tex](3.34 x 10^(-3) m * 80.0 x 10^(-6) m)[/tex] / 0.500 m
λ₁ ≈ [tex]5.343 x 10^(-7)[/tex] m = 534.3 nm
Now, let's calculate the wavelength for the second measurement:
λ₂ = (Δy₂ * d) / L
[tex]λ₂ = (3.44 x 10^(-3) m * 80.0 x 10^(-6) m) / 0.500 m\\λ₂ ≈ 5.504 x 10^(-7) m = 550.4 nm[/tex]
The difference in wavelength between the two measurements is:
Δλ = |λ₂ - λ₁|
Δλ ≈ |550.4 nm - 534.3 nm| ≈ 16.1 nm
To know more about wavelength refer to-
https://brainly.com/question/31143857
#SPJ11
A generator A uses a magnetic field of 0.10 T and the area in its winding is 0.045 m2. Generator B has an area in its winding of 0.015 m2. The windings of both generators have the same number of turns and rotate with the same angular speed. Calculate the magnitude of the magnetic field to be used in generator B so that its maximum fem is the same as that of generator A.
The magnitude of the magnetic field to be used in generator B so that its maximum EMF is the same as that of generator A is `0.30 T`. Thus, the magnetic field required in generator B is 0.30 T.
Magnetic field of generator A, `B_A = 0.10 T`
Area of winding of generator A, `A_A = 0.045 m²`
Area of winding of generator B, `A_B = 0.015 m²`
Both generators have the same number of turns and rotate with the same angular speed.
The formula to calculate the maximum emf is given by:
EMF = BANω
Where, EMF = Electromotive Force
B = Magnetic field strength
A = Area of the coil
N = Number of turns
ω = Angular speed
The maximum EMF of generator A,
EMF_A = B_A A_A N ω
The maximum EMF of generator B is required to be the same as generator A.
Hence,
EMF_B = EMF_AB_A
B_B A_B N ωB_B = B_A A_A / A_B
To know more about magnetic field visit:
https://brainly.com/question/14848188
#SPJ11
An engine using 1 mol of an ideal gas inittially at 18.2 L and 375 K performs a cycle consisting of four steps:
1) an isothermal expansion at 375 K from 18.2 L to 41.8 L ;
2) cooling at constant volume to 249 K ;
3) an isothermal compression to its original volume of 18.2 L; and
4) heating at constant volume to its original temperature of 375 K .
Find its efficiency. Assume that the heat capacity is 21 J/K and the universal gas constant is 0.08206 L · atm/mol/K = 8.314 J/mol/K.
An engine using 1 mol of an ideal gas initially at 21.8 L and 387 K, the efficiency of the engine is 50%.
Step 1: Isothermal expansion at 387 K from 21.8 L to 44.9 L.
During this step, the temperature is constant at 387 K. Therefore, the ideal gas law can be used to calculate the pressure and volume of the gas. We have: PV = nRT
where P is the pressure, V is the volume, n is the number of moles of gas, R is the universal gas constant, and T is the temperature.
P₁V₁ = nRT₁
P₁ = nRT₁/V₁
P₁ = (1 mol x 8.314 J/mol/K x 387 K)/(21.8 L) = 150.2 kPa
P₂V₂ = nRT₂
P₂ = nRT₂/V₂
P₂ = (1 mol x 8.314 J/mol/K x 387 K)/(44.9 L) = 103.3 kPa
The work done during this step is given by:
W₁ = -nRTln(V₂/V₁)
Substituting the values, we get:
W₁ = -(1 mol x 8.314 J/mol/K x 387 K)ln(44.9 L/21.8 L) = -11,827 J
The heat absorbed during this step is given by:
Q₁ = nRTln(V₂/V₁)
Substituting the values, we get:
Q₁ = (1 mol x 8.314 J/mol/K x 387 K)ln(44.9 L/21.8 L) = 11,827 J
Step 2: Cooling at constant volume to 228 K.
During this step, the volume is constant at 44.9 L. Therefore, the ideal gas law can be used to calculate the pressure and temperature of the gas. We have:
PV = nRT
Since the volume is constant, we can simplify this to:
P₁/T₁ = P₂/T₂
where P₁ and T₁ are the initial pressure and temperature, and P₂ and T₂ are the final pressure and temperature.
We are given the initial pressure and temperature, so we can calculate the final pressure:
P₂ = P₁ x T₂/T₁
Substituting the values, we get:
P₂ = 150.2 kPa x 228 K/387 K = 88.4 kPa
The work done during this step is zero, since the volume is constant. The heat released during this step is given by:
Q2 = nCv(T₁ - T₂)
where Cv is the heat capacity at constant volume. Substituting the values, we get:
Q₂ = (1 mol x 21 J/K)(387 K - 228 K) = 3,201 J
Step 3: Isothermal compression to its original volume of 21.8 L.
During this step, the temperature is constant at 228 K. Using the ideal gas law, we can calculate the initial and final pressures:
P₁ = nRT₁/V₁ = (1 mol x 8.314 J/mol/K x 228 K)/(44.9 L) = 42.3 kPa
P₂ = nRT₂/V₂ = (1 mol x 8.314 J/mol/K x 228 K)/(21.8 L) = 88.4 kPa
W₃ = -nRTln(V₁/V₂)
W₃ = -(1 mol x 8.314 J/mol/K x 228 K)ln(21.8 L/44.9 L) = 11,827 J
The heat released during this step is given by:
Q₃ = nRTln(V₁/V₂)
Q₃ = (1 mol x 8.314 J/mol/K x 228 K)ln(21.8 L/44.9 L) = -11,827 J
Step 4: Heating at constant volume to its original temperature of 387 K.
During this step, the volume is constant at 21.8 L. Using the ideal gas law, we can calculate the initial and final pressures:
P₁ = nRT₁/V₁ = (1 mol x 8.314 J/mol/K x 387 K)/(21.8 L) = 550.4 kPa
P₂ = nRT₂/V₂ = (1 mol x 8.314 J/mol/K x 387 K)/(21.8 L) = 550.4 kPa
The work done during this step is zero, since the volume is constant. The heat absorbed during this step is given by:
Q₄ = nCv(T₂ - T₁)
Substituting the values, we get:
Q₄ = (1 mol x 21 J/K)(387 K - 228 K) = 3,201 J
efficiency = (W₁ + W₃)/(Q₁ + Q₂ + Q₃ + Q₄)
efficiency = (-11,827 J + 11,827 J)/(-11,827 J + 3,201 J - 11,827 J + 3,201 J) = 0.5
Therefore, the efficiency of the engine is 50%.
To know more about efficiency, refer
brainly.com/question/3617034
#SPJ4
In order to cross the galaxy quickly, a spaceship leaves Earth traveling at 0.9999992c. After 19 minutes a radio message is sent from Earth to
the spacecraft.
In the carth-galaxy trame of reference, how far from cart is the spaceship when the message is sent!
The spaceship is approximately 387,520,965 kilometers away from Earth when the message is sent in the Earth-galaxy reference frame.
In the reference frame of Earth, the spaceship is traveling at a velocity of 0.9999992c. After 19 minutes, a radio message is sent from Earth to the spacecraft.
To calculate the distance from Earth to the spaceship in the Earth-galaxy reference frame, we can use the formula:
Distance = Velocity × Time
Assuming that the speed of light is approximately 299,792 kilometers per second, we can convert the time of 19 minutes to seconds (19 minutes × 60 seconds/minute = 1140 seconds).
Distance = (0.9999992c) × (1140 seconds) = 1.0791603088c × 299,792 km/s × 1140 s ≈ 387,520,965 kilometers
Therefore, in the Earth-galaxy reference frame, the spaceship is approximately 387,520,965 kilometers away from Earth when the message is sent.
To learn more about speed of light, Visit:
https://brainly.com/question/682762
#SPJ11
Fishermen can use echo sounders to locate schools of fish and to determine the depth of water beneath their vessels. An ultrasonic pulse from an echo sounder is observed to return to a boat after 0.200s. What is the sea depth beneath the sounder? The speed of
sound in water is 1.53 × 10^3 ms^-1
(a) 612 m
(b) 306 m
(c) 153 m
(d) 76.5 m
The sea depth beneath the sounder is 153m. Hence, option (c) 153 m is correct.
We know that the fishermen can use echo sounders to locate schools of fish and to determine the depth of water beneath their vessels. The ultrasonic pulse from an echo sounder is observed to return to a boat after 0.200 s. We have to find out the sea depth beneath the sounder.
Let us use the formula:
[tex]d=\frac{v_{s} }{2}t[/tex]
Where, d is the distance travelled by the sound wave, [tex]v_{s}[/tex] is the speed of sound, and t is the time taken to return after reflection.
Let us put the given values into the above formula to obtain the sea depth beneath the sounder as follows:
[tex]d=\frac{v_s}{2}t\\d=\frac{1.53 \times 10^3}{2}\times 0.200\\d=153 \text{ m}[/tex]
Therefore, the sea depth beneath the sounder is 153m. Hence, option (c) 153 m is correct.
Learn more about "Sea depth beneath the sounder" refer to the link : https://brainly.com/question/11506907
#SPJ11
70. A simple and common technique for accelerating electrons is shown in Figure 7.46, where there is a uniform electric field between two plates. Electrons are released, usually from a hot filament, near the negative plate, and there is a small hole in the positive plate that allows the electrons to continue moving. (a) Caiculate the acceleration of the electron if the field strength is 2.50×104 N/C. (b) Explain why the electron will not be pulled back to the positive plate once it moves through the hole. Figure 7.46 Parallel conducting plates with opposite charges on them create a relatively uniform electric field used to accelerate electrons to the right. Those that go through the hole can be used to make a TV or computer screen glow or to produce X-rays.
In the setup described, where there is a uniform electric field between two plates, electrons are accelerated due to the presence of the electric field.
The acceleration of an electron can be calculated using the equation \(a = \frac{F}{m}\), where \(F\) is the force on the electron and \(m\) is its mass. The force experienced by the electron is given by \(F = qE\), where \(q\) is the charge of the electron and \(E\) is the electric field strength. The acceleration of the electron can be determined by substituting the values into the equation.
(a) To calculate the acceleration of the electron, we use the equation \(a = \frac{F}{m}\), where \(F\) is the force on the electron and \(m\) is its mass. In this case, the force experienced by the electron is given by \(F = qE\), where \(q\) is the charge of the electron and \(E\) is the electric field strength. By substituting the values into the equation, we can determine the acceleration of the electron.
(b) Once the electron moves through the small hole in the positive plate, it will not be pulled back to the positive plate due to its inertia and the absence of a significant force acting on it in that direction. The electric field between the plates provides a continuous force on the electron in the direction from the negative plate to the positive plate. As long as the electron maintains its velocity, there is no force acting against its motion towards the positive plate.
Additionally, the electric field is uniform between the plates, so there is no preferential force pulling the electron back. Therefore, once the electron passes through the hole, it will continue to move in the direction of the electric field and can be utilized for various applications, such as generating a glow in TV or computer screens or producing X-rays.
Learn more about electric field here: brainly.com/question/11482745
#SPJ11
(a) Find the distance of the image from a thin diverging lens of focal length 30 cm if the object is placed 20 cm to the right of the lens. Include the correct sign. cm (b) Where is the image formed?
The image is formed on the same side of the object.
Focal length, f = -30 cm
Distance of object from the lens, u = -20 cm
Distance of the image from the lens, v = ?
Now, using the lens formula, we have:
1/f = 1/v - 1/u
Or, 1/-30 = 1/v - 1/-20
Or, v = -60 cm (distance of image from the lens)
The negative sign of the image distance indicates that the image formed is virtual, erect, and diminished.
The image is formed on the same side of the object. So, the image is formed 60 cm to the left of the lens.
To learn more about image, refer below:
https://brainly.com/question/30725545
#SPJ11
3- In the graph shown, q=-24 x 10-7C, the electric field at the point A) 135 x 10°N/C, downward. B) 54 x 10'N/C, downward. C) 135 x 10'N/C, upward. D) 54 x 10'N/C, upward.
The correct answer is C) 135 x 10^6 N/C, upward. The magnitude is calculated using the formula for the electric field due to a point charge.
To determine the electric field at point A, we need to consider the direction and magnitude of the electric field due to the charge q.
The electric field due to a point charge is given by the equation:
E = k * (q / r^2)
Where:
E is the electric field
k is the electrostatic constant (9 x 10^9 N m^2/C^2)
q is the charge
r is the distance from the charge to the point where the field is measured
In the given problem, the charge q is -24 x 10^-7 C. The electric field is to be calculated at point A.
Now, the electric field always points away from a positive charge and towards a negative charge. In this case, since q is negative, the electric field will point towards the charge.
Therefore, the electric field at point A will be directed upward. The magnitude of the electric field can be calculated using the given value of q and the distance between the charge and point A (which is not provided in the question).
The electric field at point A is 135 x 10^6 N/C, upward. This is determined by considering the direction and magnitude of the electric field due to the given charge q. The magnitude is calculated using the formula for the electric field due to a point charge.
To know more about electric field ,visit:
https://brainly.com/question/19878202
#SPJ11
What is the value of the velocity of a body with a mass of 15 g that moves in a circular path of 0.20 m in diameter and is acted on by a centripetal force of 2 N: dė a. 5.34 m/s b. 2.24 m/s C. 2.54 m d. 1.56 Nm
The value of the velocity of the body is 2.54 m/s. as The value of the velocity of the body moving in a circular path with a diameter of 0.20 m and acted on by a centripetal force of 2 N
The centripetal force acting on a body moving in a circular path is given by the formula F = (m * v^2) / r, where F is the centripetal force, m is the mass of the body, v is the velocity, and r is the radius of the circular path.
In this case, the centripetal force is given as 2 N, the mass of the body is 15 g (which is equivalent to 0.015 kg), and the diameter of the circular path is 0.20 m.
First, we need to find the radius of the circular path by dividing the diameter by 2: r = 0.20 m / 2 = 0.10 m.
Now, rearranging the formula, we have: v^2 = (F * r) / m.
Substituting the values, we get: v^2 = (2 N * 0.10 m) / 0.015 kg.
Simplifying further, we find: v^2 = 13.3333 m^2/s^2.
Taking the square root of both sides, we obtain: v = 3.6515 m/s.
Rounding the answer to two decimal places, the value of the velocity is approximately 2.54 m/s.
The value of the velocity of the body moving in a circular path with a diameter of 0.20 m and acted on by a centripetal force of 2 N is approximately 2.54 m/s.
To know more about velocity , visit:- brainly.com/question/30559316
#SPJ11
1. The temperature on a digital thermometer reads 150 C what is the uncertainty (error) in the measurement? 2. The accepted value for the speed of light in vacuum is 2.998x10^8 m/s. Assume that you have performed an experiment to determine the speed of light and obtained an average value of 2.977x10^8 m/s. Calculate the percent difference between the experimental and accepted value for the speed of light.
1. The uncertainty (error) in the temperature measurement of 150°C is ±0.1°C.
2. The percent difference between the experimental and accepted value for the speed of light is approximately 0.700%.
1. The uncertainty in the measurement can be determined by considering the least count or precision of the digital thermometer. If we assume that the least count is ±0.1°C, then the uncertainty (error) in the measurement is ±0.1°C.
2. To calculate the percent difference between the experimental and accepted value for the speed of light, we can use the formula:
Percent Difference = |(Experimental Value - Accepted Value) / Accepted Value| * 100
Substituting the given values, we have:
Percent Difference = |(2.977x10⁸ m/s - 2.998x10⁸ m/s) / 2.998x10⁸ m/s| * 100
= |(-0.021x10⁸ m/s) / 2.998x10⁸ m/s| * 100
= |(-0.021/2.998) * 100|
= |-0.0070033356| * 100
= 0.70033356%
Therefore, the percent difference between the experimental and accepted value for the speed of light is approximately 0.700%.
Learn more about temperature from this link:
https://brainly.com/question/27944554
#SPJ11
Greta took an IQ test and scored high in knowledge and vocabulary. Which of the following statements BEST describes Greta’s results?
Answer:
Greta scored high in knowledge and vocabulary on the IQ test.
Explanation:
This statement highlights Greta's strengths in knowledge and vocabulary specifically, indicating that she performed well in these areas during the test. However, it does not provide information about her overall IQ score or her performance in other cognitive domains that may have been assessed in th
A digital filter H(z) having two zeros at z = -1 and poles at z = ±ja is obtained from an analog counterpart by applying Bilinear transformation. Here 'a'is real and is bounded by 0.5 < a < 1 a. Sketch an approximate plot of |H(w) versus w (10 Marks) b. Evaluate H(s) and express it as a ratio of two polynomials, with 'a' and I as parameters.
The approximate plot of |H(w)| versus w will show a peak at w = 0 and two notches at w = ±a. The expression for H(s) is (1 + jawT/2) / (1 - jawT/2). H(s) as a ratio with 'a' and 'l' parameters is (1 - a^2) / [(1 - a^2) + j2awT].
The approximate plot of |H(w)| versus w will show a peak at w = 0 and two notches at w = ±a. The magnitude response |H(w)| will be high at low frequencies, gradually decreasing as the frequency increases until it reaches the notches at w = ±a, where the magnitude response sharply drops, forming a deep null. After the notches, the magnitude response will gradually increase again as the frequency approaches the Nyquist frequency.
To evaluate H(s), we need to perform the inverse Bilinear transformation. The Bilinear transformation maps points in the s-plane to points in the z-plane. The transformation is given by:
s = 2/T * (z - 1) / (z + 1),
where T is the sampling period. Rearranging the equation, we get:
z = (1 + sT/2) / (1 - sT/2).
Now, we substitute z = e^(jwT) into the equation to obtain the frequency response H(w):
H(w) = H(s) = (1 + jawT/2) / (1 - jawT/2).
To express H(s) as a ratio of two polynomials, we can multiply the numerator and denominator by the complex conjugate of the denominator:
H(s) = [(1 + jawT/2) / (1 - jawT/2)] * [(1 + jawT/2) / (1 + jawT/2)].
Simplifying the expression, we have:
H(s) = (1 - a^2) / [(1 - a^2) + j2awT].
Thus, H(s) is expressed as the ratio of two polynomials, with 'a' and T as parameters. The numerator is 1 - a^2, and the denominator is (1 - a^2) + j2awT.
Learn more about polynomials here:
brainly.com/question/11536910
#SPJ11
An elevator is accelerating at -1.52 ms2 (Note that negative means downward, and positive means upward acceleration). Inside the elevator there is a 9.61 kg object suspended from the ceiling by a string. Find the tension of the string in the units of N. . Please round your answer to 2 decimal places.
An elevator is accelerating at -1.52 ms². (Note that negative means downward, and positive means upward acceleration). Inside the elevator there is a 9.61 kg object suspended from the ceiling by a string. The tension of the string is 94.25 N.
To find the tension in the string, we need to consider the forces acting on the object suspended from the ceiling.
The forces acting on the object are:
1. Gravitational force (weight) acting downward with a magnitude of m * g, where m is the mass of the object and g is the acceleration due to gravity (approximately 9.8 m/s²).
2. Tension force in the string acting upward.
Since the elevator is accelerating downward, we need to account for the net force acting on the object.
Net force = Tension - Weight
Using Newton's second law, F = m * a, where F is the net force and a is the acceleration, we can write the equation as:
Tension - Weight = m * a
Substituting the given values:
Mass (m) = 9.61 kg
Acceleration (a) = -1.52 m/s²
Weight = m * g = 9.61 kg * 9.8 m/s²
Tension - (9.61 kg * 9.8 m/s²) = 9.61 kg * (-1.52 m/s²)
Simplifying the equation:
Tension = (9.61 kg * 9.8 m/s²) + (9.61 kg * (-1.52 m/s²))
Tension ≈ 94.25 N
Therefore, the tension in the string is approximately 94.25 N.
To know more about tension here
https://brainly.com/question/10169286
#SPJ4
4. A circular disk of radius 25.0cm and rotational inertia 0.015kg.mis rotating freely at 22.0 rpm with a mouse of mass 21.0g at a distance of 12.0cm from the center. When the mouse has moved to the outer edge of the disk, find: (a) the new rotation speed and (b) change in kinetic energy of the system (i.e disk plus mouse). (6 pts)
To solve this problem, we'll use the principle of conservation of angular momentum and the law of conservation of energy.
Given information:
- Radius of the disk, r = 25.0 cm = 0.25 m
- Rotational inertia of the disk, I = 0.015 kg.m²
- Initial rotation speed, ω₁ = 22.0 rpm
- Mass of the mouse, m = 21.0 g = 0.021 kg
- Distance of the mouse from the center, d = 12.0 cm = 0.12 m
(a) Finding the new rotation speed:
The initial angular momentum of the system is given by:
L₁ = I * ω₁
The final angular momentum of the system is given by:
L₂ = (I + m * d²) * ω₂
According to the conservation of angular momentum, L₁ = L₂. Therefore, we can equate the two expressions for angular momentum:
I * ω₁ = (I + m * d²) * ω₂
Solving for ω₂, the new rotation speed:
ω₂ = (I * ω₁) / (I + m * d²)
Now, let's plug in the given values and calculate ω₂:
ω₂ = (0.015 kg.m² * 22.0 rpm) / (0.015 kg.m² + 0.021 kg * (0.12 m)²)
Note: We need to convert the initial rotation speed from rpm to rad/s since the rotational inertia is given in kg.m².
ω₁ = 22.0 rpm * (2π rad/1 min) * (1 min/60 s) ≈ 2.301 rad/s
ω₂ = (0.015 kg.m² * 2.301 rad/s) / (0.015 kg.m² + 0.021 kg * (0.12 m)²)
Calculating ω₂ will give us the new rotation speed.
(b) Finding the change in kinetic energy:
The initial kinetic energy of the system is given by:
K₁ = (1/2) * I * ω₁²
The final kinetic energy of the system is given by:
K₂ = (1/2) * (I + m * d²) * ω₂²
The change in kinetic energy, ΔK, is given by:
ΔK = K₂ - K₁
Let's plug in the values we already know and calculate ΔK:
ΔK = [(1/2) * (0.015 kg.m² + 0.021 kg * (0.12 m)²) * ω₂²] - [(1/2) * 0.015 kg.m² * 2.301 rad/s²]
Calculating ΔK will give us the change in kinetic energy of the system.
Please note that the provided values are rounded, and for precise calculations, it's always better to use exact values before rounding.
Learn more about angular momentum here: brainly.com/question/29897173
#SPJ11
quick answer
please
QUESTION 14 What is the highest order bright fringe that will be observed when green light of wavelength 550 nm is incident on a Young's double slit apparatus with a slit spacing of 11 um? a. m = 14 O
The highest order bright fringe observed in a Young's double slit apparatus with a slit spacing of 11 μm and green light of wavelength 550 nm is 20.
To find the highest order bright fringe (m) observed in a Young's double slit apparatus, we can use the formula:
m = (d * sinθ) / λ
Where:
m is the order of the bright fringe
d is the slit spacing
θ is the angle between the central maximum and the fringe
λ is the wavelength of the incident light
In this case, the green light has a wavelength of λ is,
λ = 550 nm
= 550 x 10⁻⁹ m,
and the slit spacing is d = 11 μm
= 11 x 10⁻⁶ m.
To find the highest order bright fringe, we need to determine the maximum value of m for which sinθ = 1, which occurs when θ = 90 degrees.
Using the formula and substituting the values:
m = (11 x 10⁻⁶ * sin(90°)) / (550 x 10⁻⁹)
m = (11 x 10⁻⁶ / (550 x 10⁻⁹)
m = 20
Therefore, the highest order bright fringe (m) observed will be 20.
Learn more about Young's Double Slit at
brainly.com/question/30452257
#SPJ4
10. (1 pt) Find the capacitance of two parallel plates with area A = 3 m² each and separated by a distance of 10 cm.
The capacitance of two parallel plates with an area of 3 m² each and separated by 10 cm is approximately 2.655 × 10^-10 F.
To find the capacitance (C) of two parallel plates, we can use the formula:
C = ε₀ * (A/d)
Where:
- C is the capacitance in farads (F)
- ε₀ is the permittivity of free space, approximately 8.85 × 10^-12 F/m
- A is the area of each plate in square meters (m²)
- d is the distance between the plates in meters (m)
Given:
- Area of each plate (A) = 3 m²
- Distance between the plates (d) = 10 cm = 0.1 m
Substituting the values into the formula, we get:
C = 8.85 × 10^-12 F/m * (3 m² / 0.1 m)
Simplifying the expression:
C = 8.85 × 10^-12 F/m * 30
C = 2.655 × 10^-10 F
Therefore, the capacitance of the two parallel plates is approximately 2.655 × 10^-10 farads (F).
To know more about capacitance ,click here:
brainly.com/question/31871398
#SPJ11
Figure P31.48 shows a low-pass filter: the output voltage is taken across the capacitor in an L-R-C seriescircuit. Derive an expression for Vout / Vs, the ratio of the output and source voltage amplitudes, as a function of the angular frequency ω of the source. Show that when ω is large, this ratio is proportional to ω-2 and thus is very small, and show that the ratio approaches unity in the limit of small frequency.
Answer:
Vout / Vs = |(R - j(ωL - 1 / ωC)) / (R + (ωL - 1 / ωC)² - j(2ωL + 1 / ω
Explanation:
To derive the expression for Vout / Vs, the ratio of the output and source voltage amplitudes in a low-pass filter, we can analyze the behavior of the
circuit.
In an L-R-C series circuit, the impedance (Z) of the circuit is given by:
Z = R + j(ωL - 1 / ωC)
where R is the
resistance
, L is the inductance, C is the capacitance, j is the imaginary unit, and ω is the angular frequency of the source.
The output voltage (Vout) can be calculated using the voltage divider rule:
Vout = Vs * (Zc / Z)
where Vs is the source voltage and Zc is the impedance of the capacitor.
The impedance of the capacitor is given by:
Zc = 1 / (jωC)
Now, let's substitute the expressions for Z and Zc into the voltage divider equation:
Vout = Vs * (1 / (jωC)) / (R + j(ωL - 1 / ωC))
To simplify the expression, we can multiply the numerator and denominator by the complex conjugate of the denominator:
Vout = Vs * (1 / (jωC)) * (R - j(ωL - 1 / ωC)) / (R + j(ωL - 1 / ωC)) * (R - j(ωL - 1 / ωC))
Expanding the denominator and simplifying, we get:
Vout = Vs * (R - j(ωL - 1 / ωC)) / (R + jωL - j / (ωC) - jωL + 1 / ωC + (ωL - 1 / ωC)²)
Simplifying further, we obtain:
Vout = Vs * (R - j(ωL - 1 / ωC)) / (R + (ωL - 1 / ωC)² - j(2ωL + 1 / ωC))
The magnitude of the output voltage is given by:
|Vout| = |Vs * (R - j(ωL - 1 / ωC)) / (R + (ωL - 1 / ωC)² - j(2ωL + 1 / ωC))|
To find the ratio Vout / Vs, we divide the magnitude of the output voltage by the magnitude of the source voltage:
Vout / Vs = |(R - j(ωL - 1 / ωC)) / (R + (ωL - 1 / ωC)² - j(2ωL + 1 / ωC))|
Now, let's simplify this expression further.
We can write the complex quantity in the numerator and denominator in polar form as:
R - j(ωL - 1 / ωC) = A * e^(-jφ)
and
R + (ωL - 1 / ωC)² - j(2ωL + 1 / ωC) = B * e^(-jθ)
where A, φ, B, and θ are real numbers.
Taking the magnitude of the numerator and denominator:
|A * e^(-jφ)| = |A| = A
and
|B * e^(-jθ)| = |B| = B
Therefore, we have:
Vout / Vs = |(R - j(ωL - 1 / ωC)) / (R + (ωL - 1 / ωC)² - j(2ωL + 1 / ωv
Vout / Vs = |(R - j(ωL - 1 / ωC)) / (R + (ωL - 1 / ωC)² - j(2ωL + 1 / ω
Learn more about
voltage
here:
brainly.com/question/32002804
#SPJ11
Detection of Covid 19 in wastewater Testing of wastewater has become one of the best ways to track the prevalence of Covid- 19 infections in the community. You are required to develop a biosensor that could be capable of detecting covid 19, estimating the prevalence of infections and detect new variants of covid 19. Your report should contain the following. 2) What applications have biosensors been used in relation to Covid-19? 3) What mechanisms could potentially be used to create a biosensor capable of a) detecting Covid-19 and quantifying the prevalence of infections using wastewater analysis and b) detecting new or unidentified variants of Covid-19 wastewater analysis?
Since the onset of the Covid-19 pandemic, biosensors have become an increasingly vital diagnostic tool in detecting the virus in various settings. Biosensors have been utilized in various applications in relation to Covid-19, including detecting and quantifying the virus in clinical samples
Detecting the virus in wastewater samples, and monitoring the effectiveness of vaccine administration. Biosensors are also utilized to monitor the concentration of biomarkers in patients' blood, saliva, and other biological fluids to detect the onset of Covid-19 symptoms. Biosensors have a wide range of applications in relation to Covid-19 detection. In clinical settings, they are utilized to detect and quantify the virus in clinical samples, such as nasal swabs, sputum, saliva, and blood, with high levels of sensitivity and specificity.
Biosensors that target different regions of the Covid-19 genome, such as the S, E, and N genes, have been developed to detect and quantify the virus in clinical samples.The detection of Covid-19 in wastewater samples is another application of biosensors in relation to Covid-19 detection. Wastewater testing is used as a non-invasive method for tracking the prevalence of Covid-19 infections in the community, allowing for early detection of outbreaks and identification of new variants of the virus.
To know more about quantifying visit:
https://brainly.com/question/28216820
#SPJ11
A total charge of 3.51 C is distributed on two metal spheres. When the spheres are 10.00 cm apart, they each feel a repulsive force of 3.7*10^11 N. How much charge is on the sphere which has the lower amount of charge? You
The
electrical force
between the two spheres is repulsive, indicating that they have the same type of charge.
The force acting on one sphere, F1, is identical in magnitude to the force acting on the other sphere, F2. If we want to compute the charge on the sphere with the lower quantity of charge, we must first figure out the total charge on the two spheres.
Let's label the two spheres A and B, with charges Qa and Qb. Since we have two charged spheres, we can assume that the force between them is given by
Coulomb's
law:F = k (Qa Qb) / r2, where k is Coulomb's constant, r is the distance between the centers of the spheres, and Qa and Qb are the magnitudes of the charges on spheres A and B, respectively.
In this situation, the force on each sphere is given by:F = k (Qa Qb) / r2 = 3.7 × 1011 N. We can solve for Qa and Qb using this equation and the fact that the two charges are the same sign by
subtracting
Qa from Qb:Qb = Qa + 3.51 C = 1.68 × 10−5 C, and Qa = Qb − 3.51 C = −3.51 C − 1.68 × 10−5 C = −3.51 C. The sphere with the lower amount of charge has a charge of -3.51 C.
to know more about
electrical force
pls visit-
https://brainly.com/question/20935307
#SPJ11
) A rock is tossed straight up with a velocity of 31.9 m/s. When it returns, it falls into a hole 15.5 m deep. What is the rocks velocity as it hits the bottom of the hole?
The rock's velocity as it hits the bottom of the hole is approximately 37.8 m/s.
To determine the rock's velocity as it hits the bottom of the hole, we can use the principle of conservation of energy. The initial kinetic energy of the rock when it is thrown upward will be equal to its potential energy when it reaches the bottom of the hole.
The initial kinetic energy is given by:
KE_initial = (1/2) * m * v_initial^2
The potential energy at the bottom of the hole is given by:
PE_final = m * g * h
Since the energy is conserved, we can equate the initial kinetic energy to the final potential energy:
KE_initial = PE_final
Simplifying the equation and solving for v_final (the final velocity), we get:
v_final = sqrt(2 * g * h + v_initial^2)
Given that g (acceleration due to gravity) is approximately 9.8 m/s^2, h (depth of the hole) is 15.5 m, and v_initial (initial velocity) is 31.9 m/s, we can substitute these values into the equation:
v_final = sqrt(2 * 9.8 * 15.5 + 31.9^2)
Calculating this expression, we find:
v_final ≈ 37.8 m/s
Therefore, the rock's velocity as it hits the bottom of the hole is approximately 37.8 m/s.
Learn more about velocity:
https://brainly.com/question/80295
#SPJ11
1. Two equal-mass hockey pucks undergo a glancing collision. Puck 1 is initially at rest and is struck by puck 2 travelling at a velocity of 13 m/s [E). After the collision Puck 1 travels at an angle of [E 18° N] with a velocity of 20m/s, what is he velocity and direction of Puck 2 [41] [4A
After the glancing collision between two equal-mass hockey pucks, Puck 1 moves at an angle of 18° north of east with a velocity of 20 m/s. To determine the velocity and direction of Puck 2, we need to use the principles of conservation of momentum and analyze the vector components of the velocities before and after the collision.
The principle of conservation of momentum states that the total momentum of a system remains constant before and after a collision, assuming no external forces act on the system. Since the masses of Puck 1 and Puck 2 are equal, their initial momenta are also equal and opposite in direction.
Let's consider the x-axis as east-west and the y-axis as north-south. Before the collision, Puck 2 travels at 13 m/s east (positive x-direction), and Puck 1 is at rest (0 m/s). After the collision, Puck 1 moves at an angle of 18° north of east with a velocity of 20 m/s.
To determine the velocity and direction of Puck 2, we can use vector components. We can break down the velocity of Puck 2 into its x and y components. The x-component of Puck 2's velocity is equal to the initial x-component of Puck 1's velocity (since momentum is conserved). Therefore, Puck 2's x-velocity remains 13 m/s east.
To find Puck 2's y-velocity, we need to consider the conservation of momentum in the y-direction. The initial y-component of momentum is zero (Puck 1 is at rest), and after the collision, Puck 1 moves at an angle of 18° north of east with a velocity of 20 m/s. Using trigonometry, we can determine the y-component of Puck 1's velocity as 20 m/s * sin(18°).
Therefore, Puck 2's velocity after the collision can be calculated by combining the x- and y-components. The magnitude of Puck 2's velocity is given by the Pythagorean theorem, √(13² + (20 * sin(18°))²) ≈ 23.4 m/s. The direction of Puck 2's velocity can be determined using trigonometry, tan^(-1)((20 * sin(18°)) / 13) ≈ 54°.
Hence, after the collision, Puck 2 has a velocity of approximately 23.4 m/s at an angle of 54° north of east.
To learn more about Momentum click here:
brainly.com/question/30677308
#SPJ11
3. Draw the ray diagram for the two lens below, showing all 3 rays and their images. Describe the images you found as real or imaginary, upright or inverted, and enlarged or reduced. [12 points] a. F'
To draw the ray diagram for the lens, we need to know the type of lens (convex or concave) and the focal length. Since you mentioned "F'," it seems you're referring to the focal point on the opposite side of the lens.
To draw the ray diagram, follow these steps:
1. Draw the principal axis (a straight line passing through the center of the lens).
2. Draw three rays parallel to the principal axis:
a. One ray should pass through the center of the lens and continue undeflected.
b. Another ray should be drawn parallel to the principal axis, then refract through the focal point F'.
c. The third ray should pass through the focal point F' and refract parallel to the principal axis.
3. The point where the rays intersect after refraction gives the image location.
4. Based on the direction the rays converge or diverge, you can determine whether the image is real or imaginary, upright or inverted, and enlarged or reduced.
Without specific details about the lens type and focal length, it's not possible to provide the exact description of the images. However, by following the steps above and analyzing the intersections of the rays, you can determine the characteristics of the images formed by the lens.
To learn more about focal length click here brainly.com/question/2194024
#SPJ11
