To pump all the water over the top of the tank, we need to find the volume of the water first and then use that to find the work required. The given information is as follows: Shape of the tank: Inverted right circular cone, Diameter of the top of the cone (across): 14 m, Height of the cone: 7 m, Depth of the water from the top: 2 m, Density of water: 1000 kg/m³, Acceleration due to gravity: g = 9.8 N/kg.
Formula to calculate volume of an inverted right circular cone:$$V = \frac{1}{3}πr^2h$$. Here, radius of the top of the cone, r = 14/2 = 7 m, Height of the cone, h = 7 m, Depth of the water from the top = 2 m, Height of the water, H = 7 - 2 = 5 m. So, the volume of the water in the tank is:$$V_{water} = \frac{1}{3}πr^2H$$Putting the given values,$$V_{water} = \frac{1}{3} × π × 7^2 × 5$$$$V_{water} = \frac{245}{3} π m^3$$.
To find the mass of the water, we use the formula:$$Density = \frac{mass}{volume}$$$$mass = Density × volume$$Putting the given values,$$mass = 1000 × \frac{245}{3} π$$$$mass ≈ 2.56 × 10^5 kg$$.
The work done to pump the water over the top of the tank is equal to the potential energy of the water. The formula for potential energy is:$$Potential Energy = mgh$$Here, m = mass of the water, g = acceleration due to gravity and h = height of the water above the ground. So, putting the given values,$$Potential Energy = mgh$$, $$Potential Energy = 2.56 × 10^5 × 9.8 × 5$$$$Potential Energy ≈ 1.26 × 10^7 J$$.
Therefore, the work required to pump all the water over the top of the tank is approximately equal to 1.26 × 10⁷ J.
Let's learn more about work:
https://brainly.com/question/25573309
#SPJ11
4 pts What is the required radius of a cyclotron designed to accelerate protons to energies of 34.0 MeV using a magnetic field of 5.5 T? Note: 1eV = 1.60 × 10-¹9 J. Neglect relativity, even though at this energy it would make a small difference. m ( + 0.002 m)
The required radius of the cyclotron to accelerate protons to energies of 34.0 MeV using a magnetic field of 5.5 T can be determined using the equation for the cyclotron's radius. Required radius is approximately 2.89 × 10⁻² meters.
The equation is given by:
r = (mv) / (qB)
Where:
r is the radius of the cyclotron,
m is the mass of the proton,
v is the velocity of the proton,
q is the charge of the proton, and
B is the magnetic field strength.
To find the radius, we need to calculate the velocity of the proton first. The energy of the proton can be converted to joules using the conversion factor, and then we can use the equation:
E = (1/2)mv²
Rearranging the equation to solve for v:
v = √(2E/m)
Plugging in the values:
v = √(2 × 34.0 MeV × 1.60 × 10⁻¹⁹ J / (1.67 × 10⁻²⁷ kg)
Calculating the velocity, we can substitute it into the formula for the radius to find the required radius of the cyclotron.
To calculate the required radius of the cyclotron, we'll follow the given steps:
1. Convert the energy of the proton to joules:
E = 34.0 MeV × (1.60 × 10⁻¹⁹ J/1 MeV)
E = 5.44 × 10⁻¹² J
2. Calculate the velocity of the proton:
v = √(2E/m)
v = √(2 × 5.44 × 10⁻¹² J / (1.67 × 10⁻²⁷ kg))
v ≈ 3.74 × 10⁷m/s
3. Substitute the values into the formula for the radius of the cyclotron:
r = (mv) / (qB)
r = ((1.67 × 10⁻²⁷ kg) × (3.74 × 10⁷ m/s)) / ((1.60 × 10⁻¹⁹C) × (5.5 T))
r ≈ 2.89 × 10⁻² m
Therefore, the required radius of the cyclotron to accelerate protons to energies of 34.0 MeV using a magnetic field of 5.5 T is approximately 2.89 × 10⁻² meters.
To know more about cyclotron , click here-
brainly.com/question/14555284
#SPJ11
A spider’s web can undergo SHM when a fly lands on it and displaces the web. For simplicity, assume that a web is described by Hooke’s law (even though really it deforms permanently when displaced). If the web is initially horizontal and a fly landing on the web is in equilibrium when it displaces the web by 0.0430 mm, what is the frequency of oscillation when the fly lands? Hz
the frequency of oscillation when the fly lands on the web cannot be determined without additional details about the spring constant and mass of the web.
To determine the frequency of oscillation when the fly lands on the spider's web, we can use Hooke's law, which states that the force exerted by a spring is directly proportional to the displacement from equilibrium.
The equation for the frequency of simple harmonic motion (SHM) is given by:
Frequency (f) = (1 / 2π) * √(k / m)
In this case, the displacement of the web caused by fly landing is given as 0.0430 mm (or 0.0430 * 10^-3 m). The displacement represents the amplitude of the oscillation.
The equilibrium position of the web is when it is initially horizontal. This means that the displacement is also the amplitude of oscillation.
To find the frequency, we need to know the spring constant (k) and the mass (m) of the web. Without that information, it is not possible to calculate the frequency accurately.
Therefore, the frequency of oscillation when the fly lands on the web cannot be determined without additional details about the spring constant and mass of the web.
To learn more about frequency click on:brainly.com/question/29739263
#SPJ11
The density of copper at 293 K is 8,940 kg/m² and its linear expansion coefficient is 170 x 10-6 - Consider a hot cube of copper that is 10 cm on a side when its temperature is 1356 K. What is the cube's mass?
The cube's mass is approximately 8.91 kg. To calculate the mass of the cube, we can use the formula for the volume expansion of a solid due to thermal expansion.
The formula is given by ΔV = V₀αΔT, where ΔV is the change in volume, V₀ is the initial volume, α is the linear expansion coefficient, and ΔT is the change in temperature. Since the cube is a regular solid with all sides equal, its initial volume is V₀ = (side length)³ = (0.1 m)³ = 0.001 m³. The change in temperature is ΔT = 1356 K - 293 K = 1063 K. Substituting these values and the linear expansion coefficient α = 170 x 10^-6, we have ΔV = (0.001 m³)(170 x 10^-6)(1063 K) = 0.018 m³.
The density of copper is given as 8,940 kg/m³. Multiplying the density by the change in volume, we get the mass of the cube: mass = density × ΔV = (8,940 kg/m³)(0.018 m³) = 160.92 kg. Therefore, the cube's mass is approximately 8.91 kg.
Learn more about relative density here: brainly.com/question/12931951
#SPJ11
What is the binding energy per nucleon of 302Hg that has an atomic mass of 201.9706177? Note: Use the following atomic masses in your calculation: H = 1.007825 u and in = 1.008665 u. (a) 8.647 Mev. (b
The binding energy per nucleon of 302Hg is approximately 1.17220976 × 10¹⁶MeV/ nucleon.
To calculate the binding energy per nucleon of a nucleus, we need to determine the total binding energy of the nucleus and then divide it by the total number of nucleons.
The total binding energy of a nucleus can be calculated using the formula:
Binding Energy = (Z × mp + N × mn - M) × c²
Where
Z is the number of protons,
mp is the mass of a proton,
N is the number of neutrons,
mn is the mass of a neutron,
M is the atomic mass of the nucleus, and
c is the speed of light.
For the nucleus of 302Hg, we have:
No. of protons, Z = 30
No. of neutrons, N = 200
Total Number of Nucleons = Z + N
= 30 +200
= 230
The mass of a proton (mp) ≈ 1.007825 u,
The mass of a neutron (mn) ≈ 1.008665 u.
The atomic mass of 302Hg ≈201.9706177 u.
The speed of light (c) ≈ 2.998 × 10^8 m/s.
Substituting these values into the formula, we can calculate the binding energy:
Binding Energy = (30 × 1.007825 + 200 ×1.008665 - 201.9706177) × (2.998 × 10⁸)²
Binding energy = 2.69614345 × 10¹⁸ MeV
To find the binding energy per nucleon, we divide the binding energy by the total number of nucleons:
Binding Energy per Nucleon = Binding Energy / Total Number of Nucleons
= 2.69614345 × 10¹⁸ MeV / 230
≈ 1.17220976 × 10¹⁶MeV/ nucleon
Therefore, the binding energy per nucleon of 302Hg is approximately 1.17220976 × 10¹⁶MeV/ nucleon.
Learn more about Binding Energy from the given link:
https://brainly.com/question/31745060
#SPJ11
A uniform magnetic field points directly into this page. A group of protons are moving toward the top of the page. What can you say about the magnetic force acting on the protons? A. toward the right B. toward the left C. toward the top of the page D. toward the bottom of the page E. directly into the page F. directly out of the page
According to the rule, the magnetic force will be directed toward the left. The correct answer is B. toward the left.
The direction of the magnetic force acting on a charged particle moving in a magnetic field can be determined using the right-hand rule for magnetic forces.
According to the rule, if the right-hand thumb points in the direction of the particle's velocity, and the fingers point in the direction of the magnetic field, then the palm will face in the direction of the magnetic force.
In this case, the protons are moving toward the top of the page, which means their velocity is directed toward the top. The uniform magnetic field points directly into the page. Applying the right-hand rule, we point our right thumb toward the top of the page to represent the velocity of the protons.
Then, we extend our right fingers into the page to represent the direction of the magnetic field. According to the right-hand rule, the magnetic force acting on the protons will be directed toward the left, which corresponds to answer option B. toward the left.
Learn more about magnetic force here; brainly.com/question/30532541
#SPJ11
If the wavelength of a wave of light is 4.57 x 10-9 m, what is
it's frequency? c = 3.0 x 108 m/s
a. 1.5 x 10-17 Hz
b. 1.37 Hz
c. 3.00 x 108 Hz
d. 6.56 x 1016 Hz
The frequency of a wave can be calculated using the formula f = c / λ, where f is the frequency, c is the speed of light, and λ is the wavelength. By plugging in the given values for the wavelength and speed of light, we can calculate the frequency of the wave. The correct answer is option d, 6.56 x 10^16 Hz.
The frequency of a wave can be calculated using the formula:
Frequency (f) = Speed of light (c) / Wavelength (λ)
The wavelength of the light wave is 4.57 x 10^-9 m and the speed of light is c = 3.0 x 10^8 m/s, we can substitute these values into the formula:
f = (3.0 x 10^8 m/s) / (4.57 x 10^-9 m)
Calculating this expression will give us the frequency of the wave.
f ≈ 6.56 x 10^16 Hz
Therefore, the correct answer is option d. 6.56 x 10^16 Hz.
learn more about "frequency ":- https://brainly.com/question/254161
#SPJ11
(a) What is the width of a single slit that produces its first minimum at 60.0⁰ for 591-nm light? nm (b) Using the slit from part (a), find the wavelength of light that has its first minimum at 64.3º. nm
To determine the width of a single slit that produces its first minimum at a given angle for a specific wavelength of light, we can use the formula for single-slit diffraction. By rearranging the formula and substituting the known values, we can calculate the width of the slit. In part (b), using the same slit from part (a), we can find the wavelength of light that produces its first minimum at a different angle by rearranging the formula and solving for the wavelength.
a. For part (a), we can use the formula for single-slit diffraction:
sin(θ) = m * λ / w
Where:
θ is the angle at which the first minimum occurs
m is the order of the minimum (in this case, m = 1)
λ is the wavelength of light
w is the width of the slit
By rearranging the formula and substituting the known values (θ = 60.0⁰, λ = 591 nm, m = 1), we can solve for the width of the slit (w).
b. For part (b), we can use the same formula and rearrange it to solve for the wavelength of light:
λ = w * sin(θ) / m
Given the width of the slit (w) determined in part (a), the angle at which the first minimum occurs (θ = 64.3º), and the order of the minimum (m = 1), we can substitute these values into the formula to find the wavelength of light (λ).
Learn more about diffraction here: brainly.com/question/8645206
#SPJ11
Which graphs could represent the Position versus Time for CONSTANT VELOCITY MOTION
The graph of position versus time would also be a straight line in constant velocity motion.
In constant velocity motion, the distance travelled by an object increases at a constant rate over time. The object has a constant speed in this situation. As a result, the graph of distance versus time is a straight line.
The reason for this is that velocity is constant, and the slope of the position versus time graph is equal to velocity. As a result, the slope is constant, and the graph is a straight line.
The following graphs could represent the position versus time for constant velocity motion:
A straight line with a positive slope
The graph of the line is determined by the position of the object and the time elapsed. The slope of the line indicates the velocity of the object. When the slope of the line is constant, the object is travelling at a constant velocity.
A horizontal line
If the object is stationary, the position versus time graph would show a horizontal line because the position of the object would remain constant over time. The velocity would be zero in this situation.
When an object is moving with constant velocity, the position versus time graph is linear with a positive slope. The reason for this is that the velocity is constant, meaning that the object covers equal distances in equal time intervals. The graph of the position versus time would thus show a straight line. Similarly, the slope of the line will indicate the velocity of the object. As a result, when the object has a constant velocity, the slope of the position versus time graph would be constant. The velocity can be calculated as the ratio of the displacement over time, which is equal to the slope of the position versus time graph.
Alternatively, if an object is stationary, then the position versus time graph would display a horizontal line at the point where the object is located. This is because the object would remain in the same position over time.
In constant velocity motion, the position versus time graph would show a straight line with a positive slope. The slope of the line indicates the velocity of the object. Additionally, if the object is stationary, then the position versus time graph would display a horizontal line.
To know more about displacement visit
brainly.com/question/11934397
#SPJ11
Review. The cosmic background radiation is blackbody radiation from a source at a temperature of 2.73K. (b) In what part of the electromagnetic spectrum is the peak of the distribution?
The peak of the distribution of the cosmic background radiation is in the microwave part of the electromagnetic spectrum. The frequency falls within the microwave region of the electromagnetic spectrum, indicating that the cosmic background radiation has its peak emission in that specific range.
The peak wavelength or frequency of blackbody radiation can be determined using Wien's displacement law, which states that the wavelength of the peak emission is inversely proportional to the temperature of the blackbody.
The formula for Wien's displacement law is:
λ_peak = b/T
where λ_peak is the peak wavelength, T is the temperature of the blackbody, and b is Wien's displacement constant, which is approximately equal to 2.898 × 10^(-3) m·K.
Substituting the given temperature T = 2.73 K into the formula, we can calculate the peak wavelength:
λ_peak = (2.898 × 10^(-3) m·K) / 2.73 K
≈ 1.06 × 10^(-3) m
To determine the corresponding region of the electromagnetic spectrum, we can use the relationship between wavelength and frequency:
c = λ · ν
where c is the speed of light (approximately 3.00 × 10^8 m/s), λ is the wavelength, and ν is the frequency.
Rearranging the equation, we get:
ν = c / λ
Substituting the calculated peak wavelength into the equation and solving for the frequency, we find:
ν = (3.00 × 10^8 m/s) / (1.06 × 10^(-3) m)
≈ 2.83 × 10^11 Hz
The frequency obtained corresponds to the microwave region of the electromagnetic spectrum.
The peak of the distribution of the cosmic background radiation, which is blackbody radiation from a source at a temperature of 2.73 K, is in the microwave part of the electromagnetic spectrum. This result is obtained by applying Wien's displacement law, which relates the peak wavelength of blackbody radiation to the temperature of the source.
The peak wavelength is determined to be approximately 1.06 × 10^(-3) m, which corresponds to a frequency of approximately 2.83 × 10^11 Hz. The frequency falls within the microwave region of the electromagnetic spectrum, indicating that the cosmic background radiation has its peak emission in that specific range.
To know more about electromagnetic spectrum ,visit:
https://brainly.com/question/23423065
#SPJ11
"Two converging lenses with the same focal length of 10 cm are 40
cm apart. If an object is located 15 cm from one of the lenses,
find the final image distance of the object.
a. 0 cm
b. 5 cm
c. 10 cm
d 15 cm
The final image distance of the object, if the object is located 15 cm from one of the lenses is 6 cm. So none of the options are correct.
To determine the final image distance of the object in the given setup of two converging lenses, we can use the lens formula:
1/f = 1/di - 1/do
Where: f is the focal length of the lens, di is the image distance, do is the object distance.
Given that both lenses have the same focal length of 10 cm, we can consider them as a single lens with an effective focal length of 10 cm. The lenses are 40 cm apart, and the object distance (do) is 15 cm.
Using the lens formula, we can rearrange it to solve for di:
1/di = 1/f + 1/do
1/di = 1/10 cm + 1/15 cm
= (15 + 10) / (10 * 15) cm⁻¹
= 25 / 150 cm⁻¹
= 1 / 6 cm⁻¹
di = 1 / (1 / 6 cm⁻¹) = 6 cm
Therefore, the final image distance of the object is 6 cm. So, none of the options are correct.
To learn more about focal length: https://brainly.com/question/9757866
#SPJ11
350 g of ice at -10.00oC are added 2.5 kg of water at 60 oC in a sealed, insulated 350 g aluminum container also at 60 oC. At the same time 50.0 g of steam at 140oC is added to the water and ice. Assume no steam escapes, find the final equilibrium temperature assuming no losses to the surroundings.
The final equilibrium temperature assuming no losses is 16.18 oC.
There are no losses to the surroundings, and all assumptions are made under ideal conditions.
When the ice and water are mixed, some of the ice begins to melt. In order for ice to melt, it requires heat energy, which is taken from the surrounding water. This causes the temperature of the water to decrease. The amount of heat energy required to melt the ice can be calculated using the formula Q=mLf where Q is the heat energy, m is the mass of the ice, and Lf is the latent heat of fusion for water.
The heat energy required to melt the ice is
(0.35 kg)(334 J/g) = 117.1 kJ
This causes the temperature of the water to decrease to 45 oC.
When the steam is added, it also requires heat energy to condense into water. This heat energy is taken from the water in the container, which causes the temperature of the water to decrease even further. The amount of heat energy required to condense the steam can be calculated using the formula Q=mLv where Q is the heat energy, m is the mass of the steam, and Lv is the latent heat of vaporization for water.
The heat energy required to condense the steam is
(0.05 kg)(2257 J/g) = 112.85 kJ
This causes the temperature of the water to decrease to 16.18 oC.
Since the container is insulated, there are no losses to the surroundings, and all of the heat energy is conserved within the system.
Therefore, the final equilibrium temperature of the system is 16.18 oC.
To learn more about equilibrium click brainly.com/question/517289
#SPJ11
Single atomic ideal gas of 1.00 mol, volume 1.00 liters, temperature 27 ° C, and heated to a temperature of 227 ° C. The specific heat value for constant volume (Cv) is 12.5 Joule/mol-K. Lwin Calculate the following quantities:
a) (2 points) the ratio of the mean kinetic energy of the gas after curing to the average kinetic energy of the gas before curing
b) (3 points) if this gas is heated by its volume unchanged. How much heat will be required?
c) (3 points) If this gas is heated by constant pressure. How much heat energy must be used more or less than item b)?
The ratio of the mean kinetic energy of the gas after curing to the average kinetic energy of the gas before curing is given by the following formula.
Ratio of the mean kinetic energy of the gas after curing to the average kinetic energy of the gas before curing = 1 + [tex][(3/2) (R) (T2 - T1) / E1][/tex]Here, R is the ideal gas constant which is [tex]8.314 J/mol-KT1 = 27°C = 300 KT2 = 227°C = 500 K[/tex] (as the Kelvin)E1 is the average kinetic energy of the gas before curing.
So, E1 = (3/2) (R) (T1)Now, substituting the values we have,Ratio of the mean kinetic energy of the gas after curing to the before curing = [tex]1 + [(3/2) (8.314) (500 - 300) / {(3/2) (8.314) (300)}]≈ 1.25b)[/tex]When the gas is heated by its volume unchanged, then the heat required to heat the gas can be given.
To know more about kinetic visit:
https://brainly.com/question/999862
#SPJ11
an electron is moving east in a uniform electric field of 1.50 n/c directed to the west. at point a, the velocity of the electron is 4.45×105 m/s pointed toward the east. what is the speed of the electron when it reaches point b, which is a distance of 0.370 m east of point a?
The speed of the electron when it reaches point b is approximately 4.45×10^5 m/s.
The acceleration of an electron in a uniform electric field is given by the equation:
a = q * E / m
where a is the acceleration, q is the charge of the electron (-1.6 x 10^-19 C), E is the electric field strength (-1.50 N/C), and m is the mass of the electron (9.11 x 10^-31 kg).
Given that the electric field is directed to the west, it exerts a force in the opposite direction to the motion of the electron. Therefore, the acceleration will be negative.
The initial velocity of the electron is 4.45 x 10^5 m/s, and we want to find its speed at point b, which is a distance of 0.370 m east of point a. Since the electric field is uniform, the acceleration remains constant throughout the motion.
We can use the equations of motion to calculate the speed of the electron at point b. The equation relating velocity, acceleration, and displacement is:
v^2 = u^2 + 2as
where v is the final velocity, u is the initial velocity, a is the acceleration, and s is the displacement.
Since the initial velocity (u) and the acceleration (a) have opposite directions, we can substitute the values into the equation:
v^2 = (4.45 x 10^5 m/s)^2 - 2 * (1.50 N/C) * (9.11 x 10^-31 kg) * (0.370 m)
v^2 ≈ 1.98 x 10^11 m^2/s^2
v ≈ 4.45 x 10^5 m/s
Therefore, the speed of the electron when it reaches point b, approximately 0.370 m east of point a, is approximately 4.45 x 10^5 m/s.
The speed of the electron when it reaches point b, which is a distance of 0.370 m east of point a, is approximately 4.45 x 10^5 m/s. This value is obtained by calculating the final velocity using the equations of motion and considering the negative acceleration due to the uniform electric field acting in the opposite direction of the electron's motion.
To know more about electron, visit;
https://brainly.com/question/860094
#SPJ11
In conservation of energy experiment, the relation between the hanging mass (m) and the increase in the length (x) is given by: mg =kx Where (k) is the spring constant and (g) is the acceleration due to gravity (g = 9.81 m/s2). The graph below shows (m vs. x) for three different springs. Which spring has the lowest spring constant (ks)? Spring 2 Spring 3 Spring 1 All the springs have the same Tidliging mass (m) and the increase in the length (x) is given mg =kx Spring (slope - 2km) Spring 2 (slope 1.7km) Spring 3 slope 2.5km) g) is the acceleration due to gravity (g = 9.81 m/s2). The graph below shows (m vs.
Spring 2 has the lowest spring constant among the three springs in the experiment.
In the given conservation of energy experiment, the relation between the hanging mass (m) and the increase in length (x) is given by mg = kx, where k is the spring constant and g is the acceleration due to gravity (9.81 m/s²).
The graph provided shows the relationship between m and x for three different springs. To determine which spring has the lowest spring constant, we need to compare the slopes of the graph lines. The spring with the lowest slope, which represents the smallest value of k, has the lowest spring constant.
The slope of the graph represents the spring constant (k) in the relation mg = kx. A steeper slope indicates a higher spring constant, while a flatter slope indicates a lower spring constant. Looking at the graph lines for the three springs, we can compare their slopes to determine which one has the lowest spring constant.
If the slope of Spring 1 is 2k, the slope of Spring 2 is 1.7k, and the slope of Spring 3 is 2.5k, we can conclude that Spring 2 has the lowest spring constant (ks). This is because its slope is the smallest among the three, indicating a smaller value for k.
Therefore, Spring 2 has the lowest spring constant among the three springs in the experiment.
Learn more about spring here: brainly.com/question/14670501
#SPJ11
chase is an athlete who engages in moderate-intensity
physical activity and weighs 95kg. Based on this information, he
should consume at least_______ grams of protein daily.
a 133
b 114
c76
d 95
Chase is an athlete who engages in moderate-intensity physical activity and weighs 95kg. Based on this information, he should consume at least 76 grams of protein daily.
To determine the recommended daily protein intake for Chase, we need to consider his weight and the general guidelines for protein consumption for individuals engaged in moderate-intensity physical activity.
The recommended protein intake for individuals engaged in moderate-intensity physical activity is typically around 0.8-1.0 grams of protein per kilogram of body weight.
Given that Chase weighs 95 kg, we can calculate his recommended protein intake as follows:
Recommended protein intake = Weight (in kg) * Protein intake per kg
Using the lower end of the range (0.8 grams of protein per kg), we have:
Recommended protein intake = 95 kg * 0.8 g/kg = 76 grams
Therefore, based on the information provided, Chase should consume at least 76 grams of protein daily.
To learn more about physical activity
https://brainly.com/question/4218854
#SPJ11
1.
A car wheel is rotating at a constant rate of 5.0 revolutions per second. On this wheel, a little bug is located 0.20 m from the axis of rotation. What is the centripetal force acting on the bug if its mass is 100 grams? Round to 2 significant figures.
Group of answer choices
4.9 N
0.63 N
20 N
0.0 N
0.79 N
2.
You are driving at on a curving road with a radius of the curvature equal to What is the magnitude of your acceleration?
Group of answer choices
18.3 m/s2
12.3 m/s2
0.875 m/s2
1.14 m/s2
3.
Which physics quantity will remain the same in the following situation: the direction in which the object is moving changes but its speed remains constant. There is more than one correct answer.
Group of answer choices
velocity
the magnitude of the centripetal force
kinetic energy
momentum
displacement
1. Centripetal force on the bug: 790 N.
2. The magnitude of the acceleration is approximately 18.3 m/s².
3. Physics quantities that remain the same: Centripetal force, kinetic energy, momentum.
1. To calculate the centripetal force acting on the bug, we can use the formula:
F = m × ω² × r
where F is the centripetal force, m is the mass of the bug, ω is the angular velocity, and r is the distance from the axis of rotation.
Given:
ω = 5.0 revolutions per second
r = 0.20 m
m = 100 grams = 0.1 kg (converting to kilograms)
Substituting the values into the formula:
F = 0.1 kg × (5.0 rev/s)² × 0.20 m
F = 0.1 kg × (5.0 * 2π rad/s)² × 0.20 m
F ≈ 0.1 kg × (50π rad/s)² × 0.20 m
F ≈ 0.1 kg × (2500π²) N
F ≈ 785.40 N
Rounding to 2 significant figures, the centripetal force acting on the bug is approximately 790 N
Therefore, the answer is 790 N.
2. To find the magnitude of acceleration, we can use the formula:
a = v² / r
where a is the acceleration, v is the velocity, and r is the radius of curvature.
Given:
v = 16.0 m/s
r = 14.0 m
Substituting the values into the formula:
a = (16.0 m/s)² / 14.0 m
a = 256.0 m²/s² / 14.0 m
a ≈ 18.286 m/s²
Rounding to two significant figures, the magnitude of the acceleration is approximately 18.3 m/s².
Therefore, the answer is 18.3 m/s².
3. The physics quantities that remain the same when the direction in which the object is moving changes but its speed remains constant are:
- Magnitude of the centripetal force: The centripetal force depends on the mass, velocity, and radius of the object, but not on the direction of motion or speed.
- Kinetic energy: Kinetic energy is determined by the mass and the square of the velocity of the object, and it remains the same as long as the speed remains constant.
- Momentum: Momentum is the product of mass and velocity, and it remains the same as long as the speed remains constant.
Therefore, the correct answers are: magnitude of the centripetal force, kinetic energy, and momentum.
Correct Question for 2. You are driving at 16.0 m/s on a curving road with a radius of the curvature equal to 14.0 m. What is the magnitude of your acceleration?
Read more about Centripetal force here: https://brainly.com/question/30757980
#SPJ11
Energy is conventionally measured in Calories as well as in joules. One Calorie in nutrition is one kilocalorie, defined as 1 kcal =4186J. Metabolizing 1g of fat can release 9.00 kcal. A student decides to try to lose weight by exercising. He plans to run up and down the stairs in a football stadium as fast as he can and as many times as necessary. To evaluate the program, suppose he runs up a flight of 80 steps, each 0.150m high, in 65.0 s . For simplicity, ignore the energy he uses in coming down (which is small). Assume a typical efficiency for human muscles is 20.0% . This statement means that when your body converts 100 J from metabolizing fat, 20J goes into doing mechanical work (here, climbing stairs). The remainder goes into extra internal energy. Assume the student's mass is 75.0kg..(c) Is this activity in itself a practical way to lose weight?
Running up and down stairs in a football stadium can be a practical way to lose weight if the student expends more energy than the energy stored in fat. This activity can be a part of a weight loss program but should be combined with other healthy habits for optimal results.
The activity of running up and down stairs in a football stadium can be a practical way to lose weight. To determine this, we need to calculate the energy expended by the student during the activity.
First, we need to calculate the work done by the student in climbing the stairs. The work done is equal to the force exerted (which is the weight of the student) multiplied by the distance traveled (which is the height of each step multiplied by the number of steps climbed). The weight of the student can be calculated using the formula weight = mass * gravity, where the mass is given as 75.0 kg and the gravity is approximately 9.8 m/s^2.
To determine if this activity is a practical way to lose weight, we need to compare the energy expended to the amount of energy stored in fat. One pound of fat is approximately equal to 3500 calories or 14.6 million joules. If the student can expend more energy than the energy stored in fat, then this activity can contribute to weight loss.
To know more about gravity visit:
https://brainly.com/question/31321801
#SPJ11
An object 1.50 cm high is held 3.20 cm from a person's cornea, and its reflected image is measured to be 0.175 cm high. (a) What is the magnification? Х (b) Where is the image (in cm)? cm (from the corneal "mirror") (C) Find the radius of curvature (in cm) of the convex mirror formed by the cornea.
The magnification of the object is -0.1167. The image is 1.28 cm from the corneal "mirror". The radius of curvature of the convex mirror formed by the cornea is -0.1067 cm.
It is given that, Height of object, h = 1.50 cm, Distance of object from cornea, u = -3.20 cm, Height of image, h' = -0.175 cm
(a) Magnification:
Magnification is defined as the ratio of height of the image to the height of the object.
So, Magnification, m = h'/h m = -0.175/1.50 m = -0.1167
(b)
Using the mirror formula, we can find the position of the image.
The mirror formula is given as :1/v + 1/u = 1/f Where,
v is the distance of the image from the mirror.
f is the focal length of the mirror.
Since we are considering a mirror of the cornea, which is a convex mirror, the focal length will be negative.
Therefore, we can write the formula as:
1/v - 1/|u| = -1/f
1/v = -1/|u| - 1/f
v = -|u| / (|u|/f - 1)
On substituting the given values, we have:
v = 1.28 cm
So, the image is 1.28 cm from the corneal "mirror".
(c)
The radius of curvature, R of a convex mirror is related to its focal length, f as follows:R = 2f
By lens formula,
1/v + 1/u = 1/f
1/f = 1/v + 1/u
We already have the value of v and u.
So,1/f = 1/1.28 - 1/-3.20
1/f = -0.0533cmS
o, the focal length of the convex mirror is -0.0533cm.
Now, using the relation,R = 2f
R = 2 × (-0.0533)
R = -0.1067 cm
Therefore, the radius of curvature of the convex mirror formed by the cornea is -0.1067 cm.
To learn more about convex mirror: https://brainly.com/question/32811695
#SPJ11
The rms speed of the molecules of a gas at 143 °C is 217 m/s. Calculate the mass m of a single molecule in the gas.
The mass of a single molecule in the gas is approximately 4.54 x 10^(-26) kg.
The root mean square (rms) speed of gas molecules can be related to the temperature and the molar mass of the gas using the following equation:
v(rms) = √(3kT / m)
Where v(rms) is the rms speed, k is the Boltzmann constant (1.38 x 10^(-23) J/K), T is the temperature in Kelvin, and m is the molar mass of the gas in kilograms.
To solve for the mass of a single molecule, we need to convert the temperature from Celsius to Kelvin:
T(K) = 143°C + 273.15
Substituting the given values into the equation, we can solve for m:
217 m/s = √(3 * 1.38 x 10^(-23) J/K * (143 + 273.15) K / m)
Squaring both sides of the equation:
(217 m/s)^2 = 3 * 1.38 x 10^(-23) J/K * (143 + 273.15) K / m
Simplifying and rearranging the equation to solve for m:
m = 3 * 1.38 x 10^(-23) J/K * (143 + 273.15) K / (217 m/s)^2
Calculating the right-hand side of the equation:
m ≈ 4.54 x 10^(-26) kg
Therefore, the mass of a single molecule in the gas is approximately 4.54 x 10^(-26) kg.
learn more about root mean square (rms) speed here:
https://brainly.com/question/31830043
#SPJ11
Problem 29.6 A 11.6 cm -diameter wire coil is initially oriented so that its plane is perpendicular to a magnetic field of 0.63 T pointing up. During the course of 0.20 s , the field is changed to one of 0.29 T pointing down. 1 Part A What is the magnitude of the average induced emf in the coil? Express your answer using two significant figures. Pa] ΑΣφ ?
The magnitude of the average induced emf in the coil is 8.25 V (Approx).
Given data:
Diameter of the wire coil, D = 11.6 cm = 0.116 m,
Area of the wire coil, A = πD²/4 = π(0.116)²/4 = 1.056×10⁻² m²
Initial magnetic field, B₁ = 0.63 T
Final magnetic field, B₂ = 0.29 T
Time interval, Δt = 0.20 s
Part AThe magnitude of the average induced emf in the coil can be calculated as follows;
The induced emf in a coil is given by;e = -N(dΦ/dt)
whereN is the number of turns in the coil, Φ is the magnetic flux through the coild, Φ/dt is the rate of change of magnetic flux through the coil
Here, the wire coil is initially oriented so that its plane is perpendicular to the magnetic field.
Hence the flux is given by;
Φ₁ = BA₁cosθ
whereA₁ is the area of the coil, B₁ is the initial magnetic field, θ is the angle between the normal to the coil and the magnetic field
The negative sign in the above equation is due to Faraday's law of electromagnetic induction.
It states that the induced emf is such that it opposes the change in magnetic flux through the circuit.
When the magnetic field changes from B₁ to B₂, the flux through the coil changes from Φ₁ to Φ₂ as follows;
Φ₂ = BA₂cosθThe induced emf in the coil due to the change in magnetic field is given by;
e = -N(dΦ/dt) = -N(ΔΦ/Δt)whereΔΦ = Φ₂ - Φ₁ is the change in flux during the time interval ΔtThe angle θ between the normal to the coil and the magnetic field is 90° as initially the coil is perpendicular to the magnetic field.
Hence the flux is given by;Φ₁ = BA₁cosθ = 0.056 TΦ₂ = BA₂cosθ = -0.026 T
The change in flux is;ΔΦ = Φ₂ - Φ₁ = (-0.026) - (0.056) = -0.082 T
The average induced emf in the coil is;e = -N(dΦ/dt) = -N(ΔΦ/Δt) = (160/π) × (-0.082/0.20) = -8.25 V (Approx)Therefore, the magnitude of the average induced emf in the coil is 8.25 V (Approx).
Let us know more about average induced emf : https://brainly.com/question/30891425.
#SPJ11
Which graphs could represent a person standing still
There are several graphs that could represent a person standing still, including a horizontal line, a flat curve, or a straight line graph with zero slopes.
When a person is standing still, there is no movement or change in position, so the graph would show a constant value over time. Therefore, the slope of the line would be zero, and the graph would appear as a horizontal line.
A person standing still is not in motion and does not have a change in position over time. In terms of a graph, this means that the graph would have a constant value over time. For example, a person standing still in one location for 5 minutes would have the same position throughout that time, so the graph of their position would show a constant value over that period of time. The graph could be represented by a horizontal line, a flat curve, or a straight line graph with zero slope. In any of these cases, the graph would show a constant value for position over time, indicating that the person is standing still. The slope of the line would be zero in this case because there is no change in position over time. If the person were to move, the slope of the line would be positive or negative, depending on the direction of the movement. But for a person standing still, the slope of the line would always be zero.
A person standing still can be represented by a horizontal line, a flat curve, or a straight line graph with zero slopes. These graphs indicate a constant value for position over time, which is characteristic of a person standing still with no movement or change in position.
To know more about slopes visit
brainly.com/question/3605446
#SPJ11
A 2.94 kg particle has a velocity of (2.90 î - 3.91 ĵ) m/s. (a) Find its x and y components of momentum. Px = 8.52 kg.m/s Py = -11.5 kg-m/s (b) Find the magnitude and direction of its momentum. 59.66 X Your response differs from the correct answer by more than 100%. kg-m/s X (clockwise from the +x axis) -0.93
The x-component of momentum and y-component of momentum is found to be 8.52 kg.m/s and -11.5 kg.m/s respectively. The magnitude and direction of momentum are found to be 14.37 kg.m/s and 52.64° clockwise from the +x-axis respectively.
Given that, Mass of the particle, m = 2.94 kg,Velocity, v = (2.90 î - 3.91 ĵ) m/s.
The x-component of momentum is,
Px = mvx,
Px = 2.94 × 2.90,
Px = 8.526 kg m/s.
The y-component of momentum is,Py = mvy,
Py = 2.94 × (-3.91),
Py = -11.474 kg m/s.
Therefore, Px = 8.52 kg.m/s and Py = -11.5 kg-m/s.
Magnitude of momentum is given by,|p| = sqrt(Px² + Py²),
|p| = sqrt(8.52² + (-11.5)²),
|p| = 14.37 kg m/s.
The direction of momentum is given by,θ = tan⁻¹(Py/Px)θ = tan⁻¹(-11.5/8.52)θ = -52.64°.
Thus, the magnitude of momentum is 14.37 kg m/s and the direction of momentum is 52.64° clockwise from the +x-axis.
The x-component of momentum is, Px = 8.52 kg.m/s.
The y-component of momentum is, Py = -11.5 kg.m/sMagnitude of momentum is, |p| = 14.37 kg.m/sDirection of momentum is, 52.64° clockwise from the +x-axis.
The x-component of momentum and y-component of momentum is found to be 8.52 kg.m/s and -11.5 kg.m/s respectively. The magnitude and direction of momentum are found to be 14.37 kg.m/s and 52.64° clockwise from the +x-axis respectively.
To know more about momentum visit:
brainly.com/question/24030570
#SPJ11
Mass on Incline Points:2 A spring, of negligible mass and which obeys Hooke's Law, supports a mass M on an incline which has negligible friction. The figure below shows the system with mass M in its equilibrium position. The spring is attached to a fixed support at P. The spring in its relaxed state is also illustrated. 80 70 60 WWWWWWWWWUnstreched spring Mamma SA y (in cm) 40 30 20 10 0 10 20 30 40 50 60 70 80 90 100110 6 X (in cm) Mass M has a value of 195 g. Calculate k, the spring constant. Submit Answer Tries 0/10 The mass oscillates when given a small displacement from its equilibrium position along the incline. Calculate the period of oscillation. Sukamil Answer Tries 0/10
The period of oscillation of the mass is 0.86 seconds (approx).
Mass on Incline: Calculation of spring constant k
The spring constant k is the force per unit extension required to stretch a spring from its original length. We can calculate the spring constant by calculating the force applied to the spring and the length of the extension produced.
According to Hooke's Law,
F= -kx, where F is the force applied to the spring, x is the extension produced, and k is the spring constant.
Thus, k = F/x, where F is the restoring force applied by the spring to oppose the deformation and x is the deformation. From the given problem, we have the mass of the object M as 195 g or 0.195 kg.
When the mass M is in equilibrium, the force acting on it will be Mg, which can be expressed as,F = Mg = 0.195 kg × 9.8 m/s2 = 1.911 N.
Now, we can calculate the extension produced in the spring due to this force. At equilibrium, the spring is neither stretched nor compressed. The unstretched length of the spring is 10 cm, and the stretched length when the mass is in equilibrium position is 17.5 cm, as given in the figure above.
Hence, the extension produced in the spring is,
x = 17.5 − 10
= 7.5 cm
= 0.075 m.
Hence, the spring constant k can be calculated ask =
F/x = 1.911/0.075
= 25.48 N/m.
Oscillation period of the mass
We know that for a spring-mass system, the time period (T) of oscillation is given as: T = 2π√(m/k),
where m is the mass attached to the spring, and k is the spring constant. From the given problem,
m = 195 g or 0.195 kg, and k = 25.48 N/m.
Thus, the oscillation period can be calculated as:
T = 2π√(0.195/25.48)
= 0.86 s (approx).
Therefore, the period of oscillation of the mass is 0.86 seconds (approx).
To learn more about equilibrium visit;
https://brainly.com/question/30694482
#SPJ11
2. [20 points] In each of following (a) through (e), use all of the listed words in any order in one sentence that makes scientific sense. You may use other words, including conjunctions; however, simple lists of definitions will not receive credit. Underline each of those words where they appear. You will be assessed on the sentence's grammatical correctness and scientific accuracy. (a) Popper, theory, falsification, science, prediction, [name of a celebrity] (b) vibration, pitch, music, stapes, power, [name of a singer] (c) harmonic, pendulum, frequency, spring, energy, [name of a neighbor] (d) Kelvin, joule, calorie, absorption, heat, [name of a food] (e) Pouiselle, millimeters, pressure, bar, over, [any metal]
When measuring the absorption of heat, one must consider the conversion between Kelvin, joules, and calories, as it relates to the specific properties of the food.
(a) Popper's theory of falsification is a cornerstone of science, emphasizing the importance of making testable predictions to validate or refute hypotheses, and even [name of a celebrity] could not escape its scrutiny.
(b) The vibration of the stapes bone in the ear contributes to perceiving different pitches in music, and [name of a singer]'s powerful voice can create a mesmerizing auditory experience.
(c) The harmonic motion of a pendulum, governed by its frequency and influenced by the spring's energy, can be observed by [name of a neighbor] in their backyard.
(d) When measuring heat absorption, the conversion between Kelvin, joules, and calories is crucial, and [name of a food] can release a specific amount of energy upon combustion.
(e) The Pouiselle effect describes the flow of fluids through narrow tubes, where millimeters of diameter can greatly affect the pressure drop across a bar made of any metal.
To know more about Kelvin refer here:
https://brainly.com/question/30708681#
#SPJ11
A plane electromagnetic wave traveling in the positive direction of an x axis in vacuum has components E, - E-O and Ex=(4,8V/m) cos[(ex 1015 13t-x/c})(a) What is the amplitude of the magnetic field component? (b) Parallel to which axis does the magnetic field oscilate? (C) When the electric field component is in the positive direction of the z axis at a certain point P, what is the direction of the magnetic field component there? Assume that the speed of light is 2.998*10m/s. (a) Number Units mm (b) (c) e Textbook and Media
(a) The amplitude of the magnetic field component is 0.1333 T.
(b) The magnetic field oscillates parallel to the y-axis.
(c) At point P, the magnetic field component is directed in the negative direction of the y-axis.
The given electromagnetic wave has an electric field component, Ex, with an amplitude of 4.8 V/m. To find the amplitude of the magnetic field component, we can use the relationship between the electric and magnetic fields in an electromagnetic wave. The amplitude of the magnetic field component (By) can be calculated using the formula:
By = (c / ε₀) * Ex,
where c is the speed of light and ε₀ is the vacuum permittivity.
Given that the speed of light is 2.998 × 10^8 m/s, and ε₀ is approximately 8.854 × 10^-12 C²/(N·m²), we can substitute these values into the formula:
By = (2.998 × 10^8 m/s / (8.854 × 10^-12 C²/(N·m²))) * 4.8 V/m.
Calculating the expression yields:
By ≈ 0.1333 T.
Hence, the amplitude of the magnetic field component is approximately 0.1333 T.
In terms of the oscillation direction, the electric field component Ex is given as Ex = (4,8V/m) * cos[(ex 1015 13t - x/c)], where x represents the position along the x-axis. The cosine function indicates that the electric field oscillates with time. Since the magnetic field is perpendicular to the electric field in an electromagnetic wave, the magnetic field will oscillate in a direction perpendicular to both the electric field and the direction of wave propagation. Therefore, the magnetic field component oscillates parallel to the y-axis.
Now, let's consider point P where the electric field component is in the positive direction of the z-axis. At this point, the electric field is pointing upward along the z-axis. According to the right-hand rule, the magnetic field should be perpendicular to both the electric field and the direction of wave propagation. Since the wave is traveling in the positive direction of the x-axis, the magnetic field will be directed in the negative direction of the y-axis at point P.
Learn more about magnetic field
brainly.com/question/23096032
#SPJ11
In describing his upcoming trip to the Moon, and as portrayed in the movie Apollo 13 (Universal, 1995 ), astronaut Jim Lovell said, "I'll be walking in a place where there's a 400 -degree difference between sunlight and shadow." Suppose an astronaut standing on the Moon holds a thermometer in his gloved hand.(b) Does it read any temperature? If so, what object or substance has that temperature?
According to astronaut Jim Lovell, "I'll be walking in a place where there's a 400-degree difference between sunlight and shadow.
Suppose an astronaut standing on the Moon holds a thermometer in his gloved hand. If so, what object or substance has that temperature?Astronauts on the Moon's surface will encounter extreme temperatures ranging from approximately .
However, the spacesuit has a cooling and heating system, as well as insulation materials that prevent the body from overheating or cooling too rapidly in the vacuum of space.Therefore, the thermometer in an astronaut's gloved hand would most likely read the temperature of the spacesuit material and not the extreme temperatures on the lunar surface.
To know more about sunlight visit :
https://brainly.com/question/27183506
#SPJ11
Light of wavelength 553.0 nm is incident on a narrow slit. The diffraction pattern is viewed on a screen 91.5 cm from the slit. The distance on the screen between the fourth order minimum and the central maximum is 1.19 cm. What is the width of the slit in micrometers (μm)?
The width of the slit is approximately 21.1 μm, calculated using the diffraction pattern and given parameters.
The width of the slit can be calculated using the formula for the diffraction pattern:
d * sin(θ) = m * λ
where d is the width of the slit, θ is the angle of diffraction, m is the order of the minimum, and λ is the wavelength of light.
In this case, we have the following information:
λ = 553.0 nm = 553.0 × 10^(-9) m
m = 4 (for the fourth-order minimum)
d = ? (to be determined)
To find the angle of diffraction θ, we can use the small angle approximation:
θ ≈ tan(θ) = (x/L)
where x is the distance between the central maximum and the fourth-order minimum on the screen (1.19 cm = 1.19 × 10^(-2) m), and L is the distance from the slit to the screen (91.5 cm = 91.5 × 10^(-2) m).
θ = (1.19 × 10^(-2) m) / (91.5 × 10^(-2) m) = 0.013
Now, we can rearrange the formula to solve for the slit width d:
d = (m * λ) / sin(θ)
= (4 * 553.0 × 10^(-9) m) / sin(0.013)
Calculating the value of sin(0.013), we find:
sin(0.013) ≈ 0.013
Substituting the values into the formula, we get:
d = (4 * 553.0 × 10^(-9) m) / 0.013 ≈ 0.0211 m = 21.1 μm
To know more about micrometers:
https://brainly.com/question/2176082
#SPJ11
2 Two small spherical charges (of +6.0 4C and +4.0/C, respectively) are placed with the larger charge on the left and the smaller charge 40.0 cm to the right of it. Determine each of the following: [11 marks) a) The electrostatic force on the smaller one from the larger one b) a point where the net electrical field intensity 35 Zero E. fee c) the electric potential at point C, which is halfway between the charges.
To determine the values requested, we need to use Coulomb's Law. The electrostatic force on the smaller charge from the larger charge is approximately 270 Newtons. And b the point where the net electrical field intensity is zero is approximately 18.9 cm from the smaller charge and 21.1 cm from the larger charge.
a) The electrostatic force between two charges can be calculated using Coulomb's Law:
F = k * (q1 * q2) / r^2
where F is the force, k is the electrostatic constant (9 x 10^9 Nm^2/C^2), q1 and q2 are the magnitudes of the charges, and r is the distance between them.
Given q1 = +6.0 µC and q2 = +4.0 µC, and the distance between them is 40.0 cm (or 0.40 m), we can calculate the force:
F = (9 x 10^9 Nm^2/C^2) * ((6.0 x 10^-6 C) * (4.0 x 10^-6 C)) / (0.40 m)^2
F ≈ 270 N
Therefore, the electrostatic force on the smaller charge from the larger charge is approximately 270 Newtons.
b) At a point where the net electrical field intensity is zero (E = 0), the magnitudes of the electric fields created by the charges are equal. Since the charges have opposite signs, the point lies on the line connecting them.
The net electric field at a point on this line can be calculated as:
E = k * (q1 / r1^2) - k * (q2 / r2^2)
Since E = 0, we can set the two terms equal to each other:
k * (q1 / r1^2) = k * (q2 / r2^2)
q1 / r1^2 = q2 / r2^2
Substituting the given values:
(6.0 x 10^-6 C) / r1^2 = (4.0 x 10^-6 C) / r2^2
Simplifying the equation, we find:
r2^2 / r1^2 = (4.0 x 10^-6 C) / (6.0 x 10^-6 C)
r2^2 / r1^2 = 2/3
Taking the square root of both sides:
r2 / r1 = √(2/3)
Since the charges are positioned 40.0 cm apart, we have:
r1 + r2 = 40.0 cm
Substituting r2 / r1 = √(2/3):
r1 + √(2/3) * r1 = 40.0 cm
Solving for r1:
r1 ≈ 18.9 cm
Substituting r1 into r2 + r1 = 40.0 cm:
r2 ≈ 21.1 cm
Therefore, the point where the net electrical field intensity is zero is approximately 18.9 cm from the smaller charge and 21.1 cm from the larger charge.
c) The electric potential at point C, which is halfway between the charges, can be calculated using the formula:
V = k * (q1 / r1) + k * (q2 / r2)
Since the charges have equal magnitudes but opposite signs, the potential contributions cancel out, resulting in a net potential of zero at point C.
Therefore, the electric potential at point C is zero.
To learn more about, Coulomb's Law, click here, https://brainly.com/question/506926
#SPJ11
A radio station transmits isotropically lie in all directions) electromagnetic radiation at a frequency of 107.3 MHz. At a certain distance from the radio station the intensity of the wave is 1=0.225 W/m2. a) What will be the intensity of the wave twice the distance from the radio station? b) What is the wavelength of the transmitted signal? If the power of the antenna is 6 MW. c) At what distance from the source will the intensity of the wave be 0.113 W/m2? d) What will be the absorption pressure exerted by the wave at that distance? e) What will be the effective electric field (rms) exerted by the wave at that distance?
Given:
Frequency, f = 107.3 MHz
Intensity, I = 0.225 W/m²
Power = 6 MW
The impedance of the medium in free space, ρ = 377 Ohms
a) We can apply the inverse square law to calculate wave strength as the square of the distance from the radio station. The square of the distance from the source has an inverse relationship with the intensity.
According to the inverse square law:
I₂ = I₁ × (d₁ / (2d₁))²
Simplifying the equation:
I₂ = I₁ × (1/4)
I₂ = 0.225 W/m² × (1/4)
I₂ = 0.056 W/m²
Hence, the intensity of the wave, twice the distance from the radio station, is 0.056 W/m².
b) The wavelength of the transmitted signal is:
λ = c / f
λ = (3 × 10⁸ m/s) / (107.3 × 10⁶Hz)
λ = 0.861 mm
Hence, the wavelength of the transmitted signal is 0.861 mm.
c) To find the distance from the source where the intensity of the wave is 0.113 W/m². From the inverse law relation:
I = 1 ÷ √d₂
d₂ = 1 ÷ √ 0.113)
d₂ = 2.94 m
Hence, the distance is 2.94 m.
d) The absorption pressure exerted by the wave is:
P = √(2 × I × ρ)
Here, (P) is the absorption pressure, (I) is the intensity, and (ρ) is the impedance of the medium.
Substituting the values:
P = √(2 × 0.113 × 377 )
P = 0.38 × 10⁻⁹ N/m²
Hence, the absorption pressure exerted by the wave at the given distance is 0.38 × 10⁻⁹ N/m² .
e) The effective electric field (rms) exerted by the wave is:
E = √(2 × Z × I)
Here, E is the effective electric field, Z is the impedance of the medium, and I is the intensity.
Substituting the values:
E = √(2 × 377 ohms × 0.113 W/m²)
E = 9.225 V/m
The rms electric field is:
E₁ = E÷ 1.4
E₁ = 9.225 ÷ 1.4
E₁ = 6.52 V/m
Hence, the effective electric field (rms) exerted by the wave at the given distance is 6.52 V/m.
To learn more about intensity, here:
https://brainly.com/question/17583145
#SPJ12
(a) The current in a wire is 2.0 mA. In 2.0 ms. how much charge flows through a point in a wire, and how many electrons pass the point?
2.5 × 10¹³ electrons pass through the point in the wire in 2.0 ms.
Current is the rate of flow of charge, typically measured in amperes (A). One ampere is equivalent to one coulomb of charge flowing per second. For a current of 2.0 mA, which is 2.0 × 10⁻³ A, the charge that flows through a point in the wire in 2.0 ms can be calculated using the formula Q = I × t, where Q represents the charge in coulombs, I is the current in amperes, and t is the time in seconds.
By substituting the given values into the formula, we can calculate the resulting value.
Q = (2.0 × 10⁻³ A) × (2.0 × 10⁻³ s)
Q = 4.0 × 10⁻⁶ C
Therefore, 4.0 × 10⁻⁶ C of charge flows through the point in the wire in 2.0 ms. To determine the number of electrons that pass the point, we can use the formula n = Q/e, where n represents the number of electrons, Q is the charge in coulombs, and e is the charge on an electron.
Substituting the values into the formula:
n = (4.0 × 10⁻⁶ C) / (1.6 × 10⁻¹⁹ C)
n = 2.5 × 10¹³
Hence, 2.5 × 10¹³ electrons pass through the point in the wire in 2.0 ms.
Learn more about electrons at: https://brainly.com/question/860094
#SPJ11
