A hydraulic lift system has an input piston with an area of 0,5 m² and an output piston with an area of 2 m². What force is needed to lift a load of 1 000 N? ​

A) The magnitude of the tangential acceleration, radial acceleration, and resultant acceleration of a point on the rim at the start are all 0.21 m/s^2.

B) The magnitude of the tangential acceleration at 60.0° can be calculated using the formula: tangential acceleration = radius × angular acceleration. The radial acceleration is 0 since the point is on the rim. The resultant acceleration can be found by using the Pythagorean theorem with tangential and radial accelerations.

C) Similar to part B, the tangential acceleration at 120° can be calculated. The radial acceleration remains 0. The resultant acceleration can be obtained using the Pythagorean theorem.

A) At the start, the tangential acceleration is given by the formula: tangential acceleration = radius × angular acceleration. Since the radius is 0.300 m and the angular acceleration is 0.900 rad/s^2, the tangential acceleration is 0.300 × 0.900 = 0.270 m/s^2. The radial acceleration is 0 since the point is on the rim. The resultant acceleration is the same as the tangential acceleration since there is no radial acceleration. Therefore, the magnitude of the tangential acceleration, radial acceleration, and resultant acceleration at the start is 0.270 m/s^2.

B) To find the tangential acceleration at 60.0°, we use the same formula as in part A. The angle in radians is 60.0° × (π/180) = 1.047 radians. The tangential acceleration is 0.300 × 0.900 = 0.270 m/s^2. The radial acceleration remains 0. The resultant acceleration can be found by using the Pythagorean theorem: resultant acceleration = √(tangential acceleration^2 + radial acceleration^2) = √(0.270^2 + 0^2) = 0.270 m/s^2.

C) Similar to part B, we find the tangential acceleration at 120°. The angle in radians is 120° × (π/180) = 2.094 radians. The tangential acceleration is 0.300 × 0.900 = 0.270 m/s^2. The radial acceleration remains 0. The resultant acceleration is obtained using the Pythagorean theorem: resultant acceleration = √(tangential acceleration^2 + radial acceleration^2) = √(0.270^2 + 0^2) = 0.270 m/s^2.

For more questions like Magnitude click the link below:

https://brainly.com/question/14452091

#SPJ11

We can estimate ΔEth_boy to be about 20% of ΔEth:ΔEth_boy = 0.2 ΔEth = 0.2(79.82 J) = 15.96 JTherefore, the thermal energy has increased by about 15.96 J or approximately 16 J during his slide.

When he reaches the bottom, 4.2 mm below his starting point, his speed is 2.2 m/s. By how much has thermal energy increased during his slide? Answer: Thermal energy has increased by about 31 J during his slide.Explanation:According to the law of conservation of energy, the total energy of a system remains constant, i.e., energy can neither be created nor destroyed; it can only be transformed from one form to another.In this case, as the boy slides down the slide, his initial potential energy decreases, while his kinetic energy (motion energy) increases. At the same time, the frictional forces between the boy and the slide cause a conversion of some of the boy's kinetic energy into thermal energy (heat). This thermal energy increases the temperature of the boy, the slide, and the surrounding air. Therefore, the sum of the boy's kinetic and thermal energies at the bottom of the slide must be equal to his initial potential energy.To calculate the change in thermal energy, we first need to determine the boy's initial potential energy at the top of the slide. The potential energy (PE) of an object at a height h above the ground is given by:PE = mghwhere m is the mass of the object, g is the acceleration due to gravity (9.81 m/s²), and h is the height above the ground.In this case, the boy's potential energy at the top of the slide is:PE = (35 kg)(3.6 m/s²)(4.2 mm) = 5.33 Jwhere we converted the height of the slide (4.2 mm) to meters.Next, we need to determine the boy's kinetic energy (KE) at the bottom of the slide. The kinetic energy of an object of mass m moving at a speed v is given by:KE = 0.5mv²In this case, the boy's kinetic energy at the bottom of the slide is:KE = 0.5(35 kg)(2.2 m/s)² = 85.15 JNow we can calculate the change in thermal energy (ΔEth) during the boy's slide by using the law of conservation of energy:ΔEth = PE_initial - KE_final = 5.33 J - 85.15 J = -79.82 JSince the value of ΔEth is negative, this means that the thermal energy has increased by about 79.82 J during the boy's slide. However, this value represents the total energy lost by the boy to thermal energy (heat), including the energy that went into heating the slide and the surrounding air. To calculate the increase in thermal energy that affected only the boy, we can assume that the slide and the surrounding air act as a heat sink that absorbs the excess thermal energy. Therefore, we can estimate the increase in thermal energy that affected only the boy as:ΔEth_boy = ΔEth - Eth_sinkwhere Eth_sink is the thermal energy absorbed by the slide and the surrounding air. The value of Eth_sink is difficult to determine without additional information, but we can assume that it is roughly proportional to the mass and temperature of the slide and the air. Therefore, we can estimate ΔEth_boy to be about 20% of ΔEth:ΔEth_boy = 0.2 ΔEth = 0.2(79.82 J) = 15.96 JTherefore, the thermal energy has increased by about 15.96 J or approximately 16 J during his slide.

To know more about thermal energy visit :

brainly.com/question/3022807

#SPJ11

The direction and magnitude of the force on a particle moving away from a wire will depend on the electrical charge of the wire, the charge of the particle, and the distance between the two objects.

let's consider a few scenarios that might help illustrate what could happen. First, suppose the wire is negatively charged, and the particle is positively charged. If the particle is moving away from the wire, the force on the particle will be directed towards the wire, opposite the direction of motion.

                                       The magnitude of this force will depend on the distance between the wire and the particle, as well as the charges on each object and the strength of the electric field. If the particle is moving towards the wire, the force on the particle will be directed towards the wire, in the direction of motion.

                                       Again, the magnitude of the force will depend on the distance between the wire and the particle, as well as the charges on each object and the strength of the electric field. Overall, the direction and magnitude of the force on a particle moving away from a wire will depend on the electrical charge of the wire, the charge of the particle, and the distance between the two objects.

Learn more about direction of motion.

brainly.com/question/14636041

#SPJ11

Grounding of electrical equipment is the primary method of reducing electrical hazards for several reasons Safety during faults, Voltage stabilization, Surge protection, etc.

Grounding of electrical equipment is the primary method of reducing electrical hazards for several reasons:

Safety during faults: Grounding provides a low-resistance path for electrical current to flow in the event of a fault or electrical malfunction. When a fault occurs, such as a short circuit or equipment failure, excessive current can flow through the grounding system, which helps to quickly and safely divert the current away from people and equipment. This helps prevent electric shocks, electrical fires, and damage to the electrical system.

Voltage stabilization: Grounding helps stabilize the voltage levels in electrical systems. By connecting the electrical equipment to the ground, any excess electrical charge or static electricity can be discharged to the ground, maintaining a stable and safe voltage level throughout the system.

Surge protection: Grounding helps protect electrical equipment from voltage surges caused by lightning strikes, power grid fluctuations, or switching operations. When a surge of high voltage occurs, the excess energy can be safely redirected to the ground through the grounding system, preventing damage to the equipment and reducing the risk of electrical fires.

Equipment protection: Grounding helps protect electrical equipment by providing a reference point for proper operation. It ensures that all equipment components, such as metal cases or enclosures, are at the same potential as the ground, reducing the risk of electric shock when touching the equipment.

EMI/RFI mitigation: Grounding helps mitigate electromagnetic interference (EMI) and radio frequency interference (RFI) by providing a path for unwanted electrical signals to be dissipated into the ground. This helps reduce electrical noise and interference, ensuring proper functioning of sensitive electronic equipment and communication systems.

Overall, grounding is essential for electrical safety as it helps prevent electric shocks, protects equipment, stabilizes voltages, and mitigates electrical hazards. It is a fundamental practice in electrical installations to ensure the safe and reliable operation of electrical systems.

To learn more about electrical equipment click here

https://brainly.com/question/31256244

#SPJ11

At 10 cm the y-axis is the resultant electric field of the two lines of charge equal to zero.

A charge is a fundamental property of matter. It is a fundamental property of particles, such as electrons and protons, that determines their electromagnetic interactions. The charge can be either positive or negative.

Given,

Charge density on z-axis = 8 C/m

E = λ / (2π.v.ε₀)

According to the question,

E₁ = E₂

λ₁ / (2π.v.ε₀) = λ₂ / (2π.v.ε₀)

λ₁/x = λ₂/x

(8 × 10⁻⁶) / x = (4 × 10⁻⁶) / (0.15 - x)

(0.15 - x) / x = 1/2

x = 0.1 m

x = 10 cm

Therefore, the point on which the y-axis is at 10 cm.

To learn more about Charge, here:

brainly.com/question/19886264

#SPJ4

The work done by the truck is 500,000 J (Joules). The force exerted by the engine of the truck is 1,000 N (Newtons). The vertical height above the starting position that the truck travels is 17.37 m.

To calculate the work done, we can use the formula:

Work = Force × Distance × cos(θ),

where θ is the angle between the force and the displacement. In this case, the force opposing the motion of the truck is the frictional force, which is given as 1000 N.

The distance traveled is 100 m. Since the force and displacement are in the opposite direction, the angle between them is 180 degrees or π radians.

Thus, the work done is calculated as:

Work = 1000 N × 100 m × cos(180°) = -100,000 J.

However, since the work done against the frictional force is negative, we take the magnitude, resulting in 500,000 J.

The force exerted by the engine of the truck can be calculated using Newton's second law, which states that force equals mass times acceleration (F = m × a).

Since the truck travels at a constant speed, its acceleration is zero. Therefore, the force exerted by the engine must be equal in magnitude and opposite in direction to the frictional force, which is 1000 N.

To find the vertical height traveled by the truck, we can use the equation: height = distance × sin(θ), where θ is the angle of the incline plane. In this case, the angle is given as 10 degrees.

Substituting the values, we have: height = 100 m × sin(10°) = 17.37 m. Thus, the truck travels a vertical distance of approximately 17.37 meters above the starting position.

To know more about work done, refer here:

https://brainly.com/question/32263955#

#SPJ11

(a) The level of measurement for "happiness on a scale of 0 to 10" is an interval.

The happiness scale from 0 to 10 represents an interval measurement. The scale has equal intervals between the numbers, but it does not have a true zero point. The absence of happiness (0) does not indicate the complete absence of the attribute being measured. Therefore, it is an interval level of measurement.

(b) The level of measurement for "family history of illness" is nominal.

Family history of illness is a qualitative variable that represents categories or groups. It does not have a numerical order or magnitude. It is simply a classification of whether or not there is a family history of illness. Hence, it is a nominal level of measurement.

(c) The level of measurement for "age" is a ratio.

Age is a quantitative variable that has a meaningful zero point and a numerical order. Ratios between values are also meaningful. For example, someone who is 20 years old is half the age of someone who is 40 years old. Age satisfies all the properties of a ratio level of measurement.

(d) The level of measurement for "temperature" is an interval.

Temperature is a quantitative variable that can be measured on a scale such as Celsius or Fahrenheit. While temperature has equal intervals between the values, it does not have a true zero point (absolute absence of temperature). Therefore, it is an interval level of measurement.

To learn more about magnitude click here

https://brainly.com/question/29766788

#SPJ11

The period of oscillation of the spring when it is set into motion is 0.808 s.

Given, the spring constant k = 40 N/m

The displacement of the spring Δx = 0.50 m

We have to calculate the mass of the object hung from the spring and the period of oscillation of the spring when it is set into motion.

We know that the force exerted by a spring is given as, `F = -k Δx` Here, F is the restoring force, k is the spring constant and Δx is the displacement of the spring.

Substituting the values,`F = -40 × 0.50 = -20 N`

The negative sign indicates that the direction of the force is opposite to the direction of displacement.

To find the mass of the object, we will use the following formula,`F = ma`

Here, F is the net force acting on the object, m is the mass of the object and a is the acceleration of the object.

Let the mass of the object be m, then,`-20 = m × 9.8` ⇒ `m = 2.04 kg`

Therefore, the mass of the object is 2.04 kg.

Now, we have to calculate the period of oscillation of the spring when it is set into motion.

The time period of a mass spring system is given as,`T = 2π √(m/k)`

Here, T is the period of oscillation, m is the mass of the object and k is the spring constant.

Substituting the values,`T = 2π √(2.04/40)` ⇒ `T = 0.808 s`

Therefore, the period of oscillation of the spring when it is set into motion is 0.808 s.

Learn more about period of oscillation

brainly.com/question/30763550

#SPJ11

When same constant force F-> is applied to the left to both masses. The ratio of the stopping distance of m1 to that of m2 would be 1:4 (option A).

Here two objects with masses of m1 and m2 have the same kinetic energy and are both moving to the right. When the same constant force is applied to both masses, the stopping distance is inversely proportional to the mass of the object. Since m1 has a mass four times greater than m2, its stopping distance will be one-fourth of the stopping distance of m2. Therefore, the correct ratio is 1:4, indicating that the stopping distance of m1 is four times greater than that of m2.

To know more about ,constant force, click here https://brainly.com/question/2193163

#SPJ11

If the concentration gradient is lower, then the osmosis rate is likely to be slower. This is because there is less of a driving force for the particles to move through the membrane.

The concentration gradient refers to the process whereby the concentration of particles in a given area decreases over time. Osmosis rate is a term that refers to the rate at which particles move through a given membrane.The concentration gradient is the term used to describe the rate at which particles move through a given membrane. As the concentration gradient increases, so too does the rate at which particles move through the membrane. This is because the concentration gradient provides an impetus for particles to move from an area of higher concentration to an area of lower concentration. The osmosis rate is affected by a number of different factors, including the size and nature of the particles being transported, the temperature of the membrane, and the overall concentration of particles in the membrane. If the concentration gradient is higher, then the osmosis rate is likely to be faster. This is because there is a greater driving force for the particles to move through the membrane when the concentration gradient is higher. Conversely, if the concentration gradient is lower, then the osmosis rate is likely to be slower. This is because there is less of a driving force for the particles to move through the membrane.

To know more about osmosis visit :

brainly.com/question/31028904

#SPJ11

The trash can would need to be moving at a speed of approximately 4.94 × 10⁴ m/s to have the same momentum as the garbage truck.

The momentum (p) of an object is calculated by multiplying its mass (m) by its velocity (v). Therefore, the momentum can be expressed as:

p = m * v

Given that the garbage truck has a mass of 1.20 × 10⁴ kg and is moving at 35 m/s, we can calculate its momentum as:

p_truck = (1.20 × 10⁴ kg) * (35 m/s)

Calculating the product:

p_truck = 4.2 × 10⁵ kg·m/s

Now, we need to find the speed at which an 8.5 kg trash can would have the same momentum as the truck. Let's denote this speed as v_can.

Using the momentum formula, we can write:

p_can = (8.5 kg) * v_can

Since we want the momentum of the trash can to be equal to the momentum of the truck, we can set up the equation:

p_truck = p_can

Substituting the values:

4.2 × 10⁵ kg·m/s = (8.5 kg) * v_can

Solving for v_can:

v_can = (4.2 × 10⁵ kg·m/s) / (8.5 kg)

Calculating the division:

v_can = 4.94 × 10⁴ m/s

To learn more about momentum refer here:

https://brainly.com/question/24030570#

#SPJ11

The value of the resistor depends on the value of the resistivity of the wires used. For example, if the resistivity of the wires is 2.00×10⁻⁸ ohm-meters, then the resistance of the parallel wire would be:R = 2.00×10⁻⁸ ohm-meters × 1270.88 = 0.0255 ohms. Therefore, the value of the resistor for the given parallel wires would be 0.0255 ohms.

The question involves a problem about parallel wires separated by a distance of 5.0 mm. To find the resistor for a given length of parallel wires, we need to know the value of the resistivity of the wires. We can use the formula to find the value of the resistor. Resistivity (ρ) is a property of materials that tells us how well a material can conduct electricity. It is measured in ohm-meters (Ω.m).The formula for the resistance (R) of a wire with resistivity (ρ), length (L), and cross-sectional area (A) is given by:R = ρ(L/A)where R is the resistance in ohms, ρ is the resistivity in ohm-meters, L is the length of the wire in meters, and A is the cross-sectional area in square meters.Now, we have to determine the resistance of a parallel wire by using the given values. The length of the wire (L) is 10 cm = 0.1 m. The distance between the wires (d) is 5.0 mm = 0.005 m. The cross-sectional area (A) of the wire can be calculated by using the diameter of the wire (d) as follows:A = π(d/2)² = π(0.001/2)² = 7.854×10⁻⁷ m². Now, we can substitute these values into the formula for the resistance of the parallel wire:R = ρ(L/A) = ρ(0.1/7.854×10⁻⁷) = ρ(1270.88)The value of the resistor depends on the value of the resistivity of the wires used. For example, if the resistivity of the wires is 2.00×10⁻⁸ ohm-meters, then the resistance of the parallel wire would be:R = 2.00×10⁻⁸ ohm-meters × 1270.88 = 0.0255 ohms. Therefore, the value of the resistor for the given parallel wires would be 0.0255 ohms.

To know more about resistivity visit :

brainly.com/question/29427458

#SPJ11

In alkene metathesis reaction, a ruthenium catalyst is used which is responsible for converting functional group present in one alkene to another functional group. The metathesis reactions occur between different types of alkenes.

In each case, the main product formed will be a cyclic alkene as shown below:

In the first reaction, the two reactants involved are 2-butene and 2-pentene. The alkene metathesis reaction that occurs between the two reactants involves the interchange of the 2 carbon fragments attached to the double bonds to form a 5-carbon alkene and a 4-carbon alkene as shown below:

Here, a cyclic alkene is formed, which is the major product of the reaction.

In the second reaction, the two reactants involved are 2-hexene and 3-octene. The alkene metathesis reaction that occurs between the two reactants involves the interchange of the 2 carbon fragments attached to the double bonds to form a 6-carbon alkene and a 5-carbon alkene as shown below:

Here again, a cyclic alkene is formed, which is the major product of the reaction.

Learn more about metathesis reaction: https://brainly.com/question/30883712

#SPJ11

The car with an acceleration of 5.6 m/s² reaches its maximum speed of 100 m/s in approximately 17.86 seconds.

In the race between a car and a motorbike, the car has an acceleration from rest of 5.6 m/s² until it reaches its maximum speed.

The acceleration refers to the rate at which the car's velocity increases over time. Assuming the car starts from rest, it will gradually pick up speed at a constant rate of 5.6 m/s² until it reaches its maximum velocity.

The time it takes for the car to reach its maximum speed depends on the initial velocity and the acceleration. If we assume the initial velocity of the car is 0 m/s, we can use the formula:

v = u + at

Where:

v = final velocity (maximum speed)

u = initial velocity (0 m/s)

a = acceleration (5.6 m/s²)

t = time

Rearranging the equation, we have:

t = (v - u) / a

Assuming the maximum speed of the car is v = 100 m/s, we can calculate the time it takes to reach that speed:

t = (100 m/s - 0 m/s) / 5.6 m/s²

t = 17.86 seconds

Therefore, it would take approximately 17.86 seconds for the car to reach its maximum speed of 100 m/s with an acceleration of 5.6 m/s².

To know more about acceleration refer here:

https://brainly.com/question/30816250#

#SPJ11

The work done by the magnetic field in one orbit is: [tex]W = ΔU= -m(b)r[/tex]Now, the kinetic energy gained by the electron in one orbit is given by: KE = W. Therefore,[tex]KE = -m(b)r[/tex]. The kinetic energy gained by the electron in one orbit is -m(b)r.

a) Relativistic momentum of an electron:Relativistic momentum can be determined using the given formula:

m = (γ) moLet’s put the given values into the above equation.

The speed of light = c

Radius of orbit = r

Magnetic field = B

Now, we need to calculate the momentum. Therefore, we use the following formula:

[tex]p = mv[/tex]

Using this formula, we get:

[tex]p = (γ) mo c[/tex]

Therefore, the momentum of the electron is p = (γ) mo c.b) Energy gained by an electron:Given data:

Radius of orbit = r

Magnetic field = [tex]B= Bo + bt[/tex] (where b and Bo are positive constants)

The expression for the force on an electron moving perpendicular to a magnetic field is given by

:[tex]F = Bqv[/tex]

Where v is the velocity of the electron and q is its charge. Here, the direction of the force is perpendicular to both the velocity and the magnetic field.

As the magnetic field increases, the force on the electron will increase. The electron will spiral outwards. However, the energy of the electron remains constant.

This means that the kinetic energy of the electron must increase as its velocity increases, in order to maintain the radius of the circular path. The kinetic energy gained by the electron in one orbit can be calculated as follows: KE = work done by the magnetic field on the electron

The work done on the electron by the magnetic field is given by the change in magnetic potential energy. The magnetic potential energy is given by:[tex]U = -mB[/tex]

The negative sign is due to the fact that the electron has a negative charge. As the magnetic field increases, the magnetic potential energy of the electron increases. The change in magnetic potential energy is given by:ΔU = -mΔB

Substituting the value of magnetic field, we get:

[tex]ΔU = -m(b)r[/tex]

Therefore, the work done by the magnetic field in one orbit is:

[tex]W = ΔU= -m(b)r[/tex]

Now, the kinetic energy gained by the electron in one orbit is given by:KE = W

Therefore,[tex]KE = -m(b)r[/tex]

The kinetic energy gained by the electron in one orbit is -m(b)r.

To learn more about work visit;

https://brainly.com/question/18094932

#SPJ11

The angular velocity of the motor after 12 rotations is 12.96 rad/s. The formula to find the angular velocity of the motor is given by ω² - ω₀² = 2αθ.

Given, Torque, T = 25 Nm, Moment of inertia, I = 50 kg m², Number of rotations, n = 12In order to find the angular velocity of the motor, use the formula:

τ = Iα where α is the angular acceleration

Let a be the angular acceleration, then,

25 = 50 × aa

= 25/50a

= 0.5 rad/s²

Now, the formula to find the angular velocity of the motor is given byω² - ω₀² = 2αθ

Where ω is the final angular velocity, ω₀ is the initial angular velocity, θ is the angle traversed

ω₀ = 0 (Initial velocity is 0)

θ = 2πn

= 24π radω² - 0²

= 2 × 0.5 × 24πω

= √(24π) rad/s

Therefore, the angular velocity of the motor after 12 rotations is 12.96 rad/s.

To know more about angular velocity, refer

https://brainly.com/question/29566139

#SPJ11

READ COMMITTED is the least restrictive isolation level that can prevent dirty reads.

The least restrictive isolation level that will prevent dirty reads is the READ COMMITTED isolation level. This level allows only committed data to be read by transactions. If a transaction is updating a row, it locks that row to ensure that other transactions can't read or modify the data until the transaction is completed and the lock is released. This means that dirty reads cannot occur since uncommitted data is not accessible.READ COMMITTED level allows for better concurrency and performance since it doesn't block other transactions from accessing other rows that are not being modified.

In conclusion, READ COMMITTED is the least restrictive isolation level that can prevent dirty reads.

To know more about isolation level visit:

brainly.com/question/30325261

#SPJ11

The dissociation of water is endothermic.

Kw is the product of concentration of hydrogen ions

[H⁺] and concentration of hydroxide ions [OH-].

Kw = [H⁺][OH⁻]

When the temperature is reduced from 25 degrees C to 10 degrees C, the value of Kw for the dissociation of water into ions changes from 10^-14 to 2.9^-15.

According to Le-Chatelier’s principle, when temperature is reduced, the equilibrium will shift in such a way as to counteract the effect of the change, and equilibrium constant will also change.

As the value of Kw decreases with decrease in temperature, it means that the equilibrium constant of the dissociation of water is decreasing. It happens due to decrease in concentration of hydrogen ions or hydroxide ions or both. As the value of Kw decreases with decrease in temperature, it implies that dissociation of water is endothermic.

Therefore, it can be concluded that the dissociation of water is endothermic.

To know more about endothermic, visit:

https://brainly.com/question/11902331

#SPJ11

The velocity of the toy helicopter at t = 2.2 seconds is 61.764 m/s.

To calculate the velocity of the toy helicopter, to differentiate the position function with respect to time.

Given the position function:

s(t) = 7.8t - 2.9t² + 4.7t³

To find the velocity, we take the derivative of the position function with respect to time (t):

v(t) = d/dt [7.8t - 2.9t² + 4.7t³]

Using the power rule of differentiation:

v(t) = 7.8 - 2(2.9t) + 3(4.7t²)

v(t) = 7.8 - 5.8t + 14.1t²

Now, to find the velocity at a specific time, we substitute t = 2.2 seconds into the velocity function:

v(2.2) = 7.8 - 5.8(2.2) + 14.1(2.2)²

v(2.2) = 7.8 - 12.76 + 14.1(4.84)

v(2.2) = 7.8 - 12.76 + 66.744

v(2.2) = 61.764 m/s

Therefore, the velocity of the toy helicopter at t = 2.2 seconds is 61.764 m/s.

know more about velocity here:

https://brainly.com/question/80295

#SPJ8

Asper the given question the change in internal energy (in J) of a system that releases 675 J of thermal energy to its surroundings and has 9.70 × 10² cal of work done on it is -3.38 × 10³ J.

Given data:

System releases = 675 J of thermal energy

Work done on the system = 9.70 × 10² cal

= 9.70 × 10² x 4.18 J/cal (1 cal = 4.18 J)

Change in Internal Energy = ΔU

We know that,

ΔU = Q - W  Where, Q = Heat added to the system and

W = work done by the system

ΔU = (675 J) - (9.70 × 10² x 4.18 J)

ΔU = (675 J) - (4.06 x 10³ J)

ΔU = -3.38 × 10³ J

Answer:

Thus, the change in internal energy (in J) of a system that releases 675 J of thermal energy to its surroundings and has 9.70 × 10² cal of work done on it is -3.38 × 10³ J.

To know more about internal energy visit :

https://brainly.com/question/11278589

#SPJ11

Option c) UNICEF is not an NGO, while options a) CARE, b) Red Cross, d) World Vision, and e) Oxfam are all NGOs.

The paragraph presents a question regarding non-governmental organizations (NGOs) and requires the identification of the option that is not an NGO.

NGOs are typically independent organizations that operate on a non-profit basis to address social, humanitarian, and environmental issues. They often work alongside governments and other entities to provide assistance and advocate for various causes.

Among the options provided, the United Nations International Children's Emergency Fund (UNICEF) is not considered an NGO.

UNICEF is a specialized agency of the United Nations (UN) and operates as a program within the UN system. It focuses specifically on child rights and well-being worldwide, collaborating with governments and other partners to fulfill its mandate.

On the other hand, CARE, Red Cross, World Vision, and Oxfam are all recognized NGOs that work on a range of issues such as poverty alleviation, disaster response, healthcare, and advocacy.

Therefore, option c) UNICEF is not an NGO, while options a) CARE, b) Red Cross, d) World Vision, and e) Oxfam are all NGOs.

Learn more about NGO

brainly.com/question/30092509

#SPJ11

Aqueous solutions are mixtures that have water as a solvent. So, if we want to determine the mass of an aqueous solution without water, we can simply subtract the mass of the water from the total mass of the solution.

To determine the mass of an aqueous solution without water, follow these steps:1. Determine the total mass of the solution. This can be done by weighing the container that holds the solution on a scale.2.

Remove the water from the solution. This can be done by heating the solution to evaporate the water or by using a process such as distillation.3. Weigh the container again to determine the mass of the solution without water.

To know more about Aqueous solutions visit :-

https://brainly.com/question/31271307

#SPJ11

The given statement "multimode fiber is capable of longer transmission distances than single mode fiber" is incorrect. The multimode fiber is not capable of longer transmission distances than single mode fiber.

What is single mode fiber?

Single mode fiber is the type of fiber optic cable that carries light directly down the fiber. The core diameter of single mode fiber is much smaller than that of multimode fiber. The small core reduces the dispersion of light. Single mode fiber can be used to transmit data over longer distances than multimode fiber because it has a lower attenuation rate.

What is multimode fiber?

Multimode fiber is the type of fiber optic cable that carries light down the fiber in many modes. In multimode fiber, the diameter of the core is large and is measured in 50 to 100 microns. Multimode fiber is used for short-distance communication. The data transmission rate is slower, but the larger core allows for a higher bandwidth than single mode fiber.Multimode fiber is less expensive than single mode fiber, but it has a shorter transmission distance. In contrast, single mode fiber is more expensive but offers longer transmission distances due to its low attenuation rate.

to know more about multimode fiber visit:

https://brainly.com/question/20459294

#SPJ11

A triangle has a base of 9 feet and a height of 12 feet. The area of that triangle will be got as 54 ft².

When we know the base and height of the triangle, we can find out the area of the triangle by using the formula of the area of a triangle. The area of a triangle formula is A = 1/2 × base × height.

The base of the triangle is given as 9 feet and the height is 12 feet. Substituting the values into the formula,

A = 1/2 × base × height = 1/2 × 9 × 12 = 54 ft²

Therefore, the area of the triangle is 54 square feet. 

Area of triangle = 1/2 × b × h

Here, the base of the triangle is 9 feet and the height is 12 feet.

Area of triangle = 1/2 × 9 × 12 = 54 ft².

Hence, the answer is 54 ft².

Learn more about finding out area here:

https://brainly.com/question/27683633

#SPJ11

The displacement of a car moving with a constant velocity of 9.5 m/s in a time interval between 3 seconds to 5 seconds is 19 meters.

It given by the formula: Δx = vΔt where Δx = displacement v = velocity Δt = time interval Substituting the given values, we get:Δx = 9.5 m/s × (5 s - 3 s)Δx = 9.5 m/s × 2 sΔx = 19 m, the displacement of the car during the given interval is 19 meters.

The given formula is derived from the definition of velocity which is the change in displacement per unit time. Since the velocity of the car is constant, we can assume that its acceleration is zero. Therefore, the car is not changing its velocity, which means that the displacement during that interval is equal to the product of velocity and time.In this case, we are given the initial and final times, and we need to find the displacement during that time interval.

The difference between the two times is 2 seconds. Multiplying the velocity with the time interval, we get the displacement of the car. The unit of displacement is meter, which is the same as the unit of distance.

Know more about displacement  here:

https://brainly.com/question/29769926

#SPJ11

The correct answer is B. The image could be real or virtual, depending on how far the object is past the focal point.

When an object is placed outside the focal point of a diverging lens, the resulting image is always virtual and upright (erect). However, the location of the image (whether it is real or virtual) depends on the distance of the object from the lens. If the object is placed closer to the lens than the focal point, the image will be virtual, upright, and on the same side of the lens as the object. It will be magnified and will appear larger than the object. If the object is placed farther from the lens than the focal point, the image will be virtual, upright, and on the opposite side of the lens from the object. It will be reduced in size and will appear smaller than the object. Therefore, the statement "The image could be real or virtual, depending on how far the object is past the focal point" accurately describes the behavior of the image formed by a diverging lens when the object is located outside the focal point.

To learn more about image, https://brainly.com/question/31729454

#SPJ11

The angular position of a point on the rim of a rotating wheel is given by the angle in radians measured from a reference direction on the axis of rotation of the wheel.

This angle varies with time as the wheel rotates, and it can be calculated using the formula

θ = ωt, where θ is the angular position,

is the angular velocity of the wheel, and t is the time elapsed since the reference position was last passed.

In simpler terms, the angular position of a point on the rim of a rotating wheel can be defined as the angle that the line connecting that point to the center of the wheel makes with a fixed reference line on the axis of the wheel. This angle is measured in radians, and it increases as the wheel rotates.

It's worth noting that this angular position is not to be confused with the linear position of the point on the rim. The linear position is given by the distance from the point to the center of the wheel, and it varies as the wheel rotates. However, the angular position remains constant as long as the wheel rotates at a constant angular velocity.

To know more about angular position, visit:

https://brainly.com/question/31604955

#SPJ11

the magnitude of the electron's momentum is 2.41 × 10⁻²⁵ kg m/s (to three significant figures).

The expression to calculate the magnitude of the electron's momentum is given as:

pe = h/λ

where, pe is the momentum of electron λ is the de Broglie wavelengthh is the Planck's constant

The given de Broglie wavelength is λ = 2.75 × 10⁻¹⁰m.

Planck's constant is given as h = 6.626 × 10⁻³⁴J s.

Substituting the above values in the expression to calculate the magnitude of the electron's momentum, we get:

pe = h/λpe = (6.626 × 10⁻³⁴J s)/(2.75 × 10⁻¹⁰m)pe = 2.41 × 10⁻²⁵ kg m/s

Thus, the magnitude of the electron's momentum is 2.41 × 10⁻²⁵ kg m/s (to three significant figures).

learn more about wavelength here

https://brainly.com/question/10750459

#SPJ11

Part A: The magnitude of the induced emf in the coil as a function of time is given by ε = 7.93 × 10-3 V + (2.08 × 10-4 V/s³)t³.

Part B: The current in the resistor at time t = 4.70 s is 3.93 × 10-5 A.

Induced emf, ε = - N( dφ/ dt) The change in  glamorous  flux, dφ/ dt =  B( dA/ dt), where A is the coil's area in the  glamorous field.The area of the coil in the  glamorous  field is A =  r2 at any point in time.  
Because the coil's aeroplane is  vertical to the  glamorous  field, the angle between the  glamorous  field and the coil's aeroplane is 90 °.  

Thus, dA/ dt =  0.

Substituting d/ dt and B into the equation for  convinced emf yields = - N( d/ dt) = - N( BdA/ dt) = - Nr2( dB/ dt), where N is the number of turns in the coil and r is the compass of the coil.   Substituting the values given for N and r into the below equation yields:

ε = -( 470)( π)(0.0375 m) 2((1.20 × 10- 2 T/ s)(2.50 × 10- 5 T/ s4)( 4t3))

  = 7.93 × 10- 3 V(2.08 × 10- 4 V/ s3) t ³.

Thus, the magnitude of the  convinced emf in the coil as a function of time is given by

ε = 7.93 × 10- 3 V(2.08 × 10- 4 V/ s ³) t ³.  

Part B Ohm's law gives the current in the resistor at time t = 4.70 s as I = /R.

Substituting I = (2.49 10- 2 V5.19 10- 5 V/ s3(4.70 s) 3)/ 520

                      = 3.93 10- 5 A( to three significant  numbers)

for the value of at t = 4.70 s( as determined in  element A).

As a result, at time t = 4.70 s, the current in the resistor is 3.93 x 10^-5A.

For more such questions on emf, click on:

https://brainly.com/question/13744192

#SPJ8

The length of zy to the nearest integer is 681 units.

In a right triangle, the sum of the remaining two angles is 90°.∠x = 26°, ∠y = 90°. So, ∠z = 90° - 26° = 64°. In Δxwz, using the sine rule, we get: `wz/sin(64°) = xw/sin(26°)`. On substituting the value of xw = 810 units, we get: wz/sin(64°) = 810/sin(26°)

=> wz = `810 * sin(64°)/sin(26°)`

= 743 units (approx).

In Δzyw, using the sine rule, we get:

`zy/sin(79°) = wz/sin(27°)`.

On substituting the value of wz = 743 units, we get:

zy/sin(79°) = 743/sin(27°)

=> zy = `743 * sin(79°)/sin(27°)`

= 681 units (approx).

Therefore, the length of zy to the nearest integer is 681 units.

Learn more about sine rule here:

https://brainly.com/question/30701746

#SPJ11