A mixture of nitrogen, oxygen, fluorine and neon are in a container which has a tiny, tiny pinhole leak. The slowest element to leave the container is fluorine.
Gas output is expressed as:
Rate ∝ 1 / √M
rate of effusion is inversely proportional to the square root of the molecular weight.
molecular weight of nitrogen = 14amu
molecular weight of oxygen = 16 amu
Molecular weight of fluorine = 19amu
The rate of effusion with increasing molecular weight. Fluorine is therefore the element that escapes the slowest from the container. There is a mixture of nitrogen, oxygen, fluorine and neon inside the container with a very small leak. elements fluorine are the slowest to leak out of the container
Click here to learn more about effusion
https://brainly.com/question/8804761
#SPJ4
why might the method used (in this demonstration) not be suitable for determining the water of hydration for all hydrates?
The anhydrous cpd could significantly decompose into a gaseous product or significantly react w/something in the air.
Water of hydration is water that is stoichiometrically bound into a crystal. While the water is found within a crystal, it is not directly bonded to a metal cation. Crystal salts containing water of hydration are called hydrates.
Many crystals form from particles dissolved in water or aqueous solutions. It's common for some of that water to be incorporated into the framework of a crystal. Usually, heating a crystal drives off water of hydration, but the structure of the crystal is lost.
Commercial root killers often contain copper sulfate pentahydrate (CuSO4·5H2O) crystals. The five water molecules are called water of hydration.
To know more about hydrates click here:
https://brainly.com/question/12837616
#SPJ4
a mixture of gases contains 12.0 grams of n2 and 15.0 grams of ar and has a total pressure of 1.32 atm. what is the partial pressure of n2?
12.0 grams od n2 & 15.0 gram of ar are present in a gas mixture with a pressure head of 1.32 atm. 0.704 atm is the pressure drop of n2.
How does pressure work?Another of the fundamental observable characteristics of the this phase of matter, pressure (P) is understood to be the force of all gas particulate interactions divided by the size of the wall.
What connections does pressure have to chemistry?Pressure has a major impact on every aspect of our life, from of the weather to flying. It is particularly crucial during chemical reactions. Chemists can compel chemical reactions to happen and hasten the transitions among solids, fluids, or gases by adjusting pressure.
Briefing:N=12.0, Ar=15.0
Total pressure=1.32
Partial pressure= n2
WN₂=12.0
WAr =15.0
nN₂=12/28 =0.42
nAr=15/40 =0.37
Xn₂=0.42/0.42+0.37 =0.53
Pn=Xn2×Ptotal
=0.53×1.32=0.69atm that ie nearly equal to 0.7atm.
To know more about pressure visit:
https://brainly.com/question/14760196
#SPJ4
Consider the cyclohexane framework in a chair conformation, where carbon 1 has two substituents, X and Y. a. Label each position as axial or equatorial. b. On the same figure, label all positions that are gauche to the Y group on carbon 1. A bin may hold more than one label. Answer Bank x gauche quatorial 6 N 3 gauche
Gauche interactions are only possible between two substituents when their dihedral angle is equal to or less than 600.
Your provided image is somewhat not sufficient to hold two items in a bin, hence I am gonna use another image of the same question with white background to make sure you read it precisely!
Please also note that 'Y' on C-1 can have gauche interactions with substituents on C-2 & C-6 only, remaining all will just either axial or equatorial only!
Cyclohexene is a hydrocarbon with the chemical formula C6H10. This cycloalkene is a colorless liquid with a pointy scent. It's miles an intermediate in various industrial procedures. Cyclohexene isn't always very solid upon long-time garage with exposure to light and air because it forms peroxides.
Cyclohexane is an alicyclic hydrocarbon comprising a ring of six carbon atoms; the cyclic shape of hexane is used as a raw cloth within the manufacture of nylon.
Cyclohexene is used in a numerous variety of chemical syntheses. It's miles a building block that is utilized in Pharma, (eg, Clidanac, MK 346, Trandolapril, and Agchems which includes Propargite.
Learn more about Cyclohexane here:-https://brainly.com/question/26730017
#SPJ4
Aqueous ammonia is commercially available in a solution that is 28% (w/w) ammonia. What is the mole fraction of ammonia in such a solution?.
The mole fraction of ammonia in such a solution is 0.291.
What is an aqueous solution?Water containing one or more dissolved substances is called an aqueous solution. Aqueous solutions may have dissolved particles, gases, or other liquids. A mixture must be stable to be a true solution.
What is Mole Fraction?The term "mole fraction" is used by dividing the total number of moles in a given mixture by the number of molecules of a particular component. The concentration of a solution is expressed as this ratio.
28% w/w means that 100 g of ammonia solution contains 28 g of ammonia.
water = 100-28 = 72 g
mole NH3 = 28/17 = 1.647
moles of water = 72/18 = 4
Sum of moles = 4+1.647 = 5.647
Ammonia mole fraction = mol NH3/total moles
= 1.647 / 5.647 = 0.291
Therefore, the molar fraction of ammonia in such a solution is 0.291.
Learn more about aqueous solutions at Brainly.com/question/19587902
#SPJ4
fourteen grams of nitrogen (atomic mass 14 amu) contains . group of answer choices 1 mole of nitrogen atoms 0.25 moles of nitrogen atoms not enough information is given 0.5 moles of nitrogen atoms
14 gram of nitrogen contains 0.5 mol of nitrogen.
We know that the no of mol= [tex]\frac{given mass}{molar mass}[/tex] , and nitrogen contains 2 N atom thus molar mass is 28. So no of mol is [tex]\frac{14}{28}[/tex] =0.5.
Read more about mol:
https://brainly.com/question/29367909
#SPJ4
why the efficient operation of the citric acid cycle requires that the step catalyzed by citrate synthase has a large favorable free energy change.
The citrate synthase-catalyzed phase must have significant favorable free power change so that it can contribute to the production of high energy molecule, ATP, in order for citric acid cycle to function effectively.
What are some examples of molecules?A molecule is an object comprised of at least two atoms that are linked together chemically; the precise number of atomic nuclei that make up a molecule is known. One hydrogen atom gets joined to one halogen atom to form the molecule HCl(g), for instance. It is referred to as a diatomic molecule and has only two atoms.
What makes something a molecule?This term was meant to cover its original definition, which was "the smallest quantity of a component that nevertheless keeps the properties of that substance." "An atom is a body that can't cut in two; a dime is the smallest conceivable component of a specific substance," wrote James Maxwell in 1873 when defining atom and molecule.
To know more about molecule visit :
https://brainly.com/question/19556990
#SPJ4
why is the intermolecular force is always stronger at the surface of a liquid than in the middle of the liquid
The intermolecular force is always stronger at the surface of a liquid than in the middle of the liquid because of the cohesive force present in the liquid molecule.
Surface tension of a liquid is the energy required to increase the surface area of a liquid by a unit of area. This surface tension in a liquid results from an imbalanced intermolecular forces, which is known as cohesive forces. The cohesive force is defined as the action of property of molecules, which sticks to one another due to the mutual attraction.
In the middle of the liquid, a molecule in the bulk liquid experience cohesive force. It experiences cohesive force with other molecules in the all directions. At the surface of a liquid, a liquid experiences net inward cohesive forces.
On the surface of a liquid, one molecule is not surrounded by other molecule. In the middle of a liquid, unbalanced attraction pull the molecules in a backward direction.
Therefore, the intermolecular force is always stronger at the surface of a liquid than in the middle of the liquid due to the cohesive force.
To know more about intermolecular force
https://brainly.com/question/13783471
#SPJ1
Hydrogen gas was collected in a burette in a water bath with a water height difference of 15. 0 cm. Please calculate the pressure in the burette if the atmospheric pressure in the room at that time was 765. 0 torr.
The pressure in the burette if the atmospheric pressure in the room at that time was 765.0 torr is 915 torr
How do I determine the pressure in the burette?The pressure in the burette can be obtained by using the following formula:
Pressure of gas = Atmospheric presure + pressure due to height
With the above formula, we can determine the pressure in the burette. This is illustrated below:
Pressure due to height = 15 cmHg = 150 mmHg = 150 torrAtmospheric pressure = 765.0 torrPressure in burette =?Pressure in burette = Atmospheric presure + pressure due to height
Pressure in burette = 765.0 + 150
Pressure in burette = 915 torr
Thus, the pressure in burette is 915 torr
Learn more about pressure:
https://brainly.com/question/11742398
#SPJ1
What does Marx say about value?.
According to Marx, human effort is the source of all value in goods. He assessed the notion that value is shared by all goods in order to reach his conclusion.
What is the core idea of Karl Marx?The conflict between the capitalists and the working class is the central theme of Marxism, a social, political, and economic theory that was developed by Karl Marx. Marx argued that because of the intrinsic exploitation present in the power dynamics between capitalists and workers, there would necessarily be class war.
Clearly defined, what is a Marxist?Marxist Share. Include on list. Marxists are those who fervently support the political, economic, and intellectual viewpoints of Karl Marx and Friedrich Engels. Capitalism is particularly decried by Marxists.
To know more about Marx visit:
https://brainly.com/question/1095828
#SPJ4
which of the following systems (i.e., pair of metals) would you expect to exhibit complete solid solubility? explain your answers. cr-v mg-zn al-zr
Get the vanadium and chrome atomic radius from the time. Cr, V, Ag, and Au are the substances that have perfect solubility in solids.
The total distance between an atom's nucleus and its electron's outermost orbital is known as the atomic radius or atomic radius . The average or typical distance between a chemical element's nucleus and the edge of its neighboring electron shells is what we refer to as the atomic radius of that element. The ionic radius is the distance an ion's nucleus must travel before its effect on the electron cloud is felt. An atom gains or loses electrons to produce ions. Covalent radii in a molecule are equal to half the distance between the nuclei of two atoms of the same element that are covalently bound to one another. Metallic radii: In a metallic lattice, a metallic radius is equal to one-half the internuclear space between two adjacent metal ions.
Learn more about atomic radius here:
https://brainly.com/question/13607061
#SPJ4
how many grams of a 23.4% by mass naf solution is needed if you want to have 1.33 moles of naf? group of answer choices 239 g 31.1 g 13.1 g 55.9 g none of the above
The option(C) is correct, 55.9 g
What is mass?
The amount of matter in a substance or an object is quantified by its mass. Smaller masses can be measured in grammes, but the kilogramme (kg) is the standard SI unit for mass (g). You would use a balance to determine the mass.
What is gram?
The gramme (formerly gramme; SI unit sign g) is a unit of mass in the International System of Units (SI) equal to one thousandth of a kilogramme.
1.33moles=mass of NaF41.99g/molmass of NaF=1.33moles41.99g/molmass of NaF=55.85g.
Therefore, option(C) is correct, 55.9 g.
Learn more about mass from the given link.
https://brainly.com/question/1658757
#SPJ4
if stars swells up to form to form a red giant ,they are
Answer:
A Red Giant
Explanation:
When the inward gravitational forces are less than the outward radiation pressure forces, the star swells and cools, thus turning red. High mass stars become red supergiants, low mass stars become red giants. The forces become unbalanced when the hydrogen begins to run out.
Brainliest Please?
What are the bulk properties of matter?.
State variables are used to characterize matter in bulk. Volume V, compression p, mass M, particle density, thermal energy Eth, and temperature T are some of these variables.
What does a matter mean in chemistry?Matter is everything that occupies space and appears to have mass; in the other words, matter seems to be the "stuff" which the cosmos is made of. The basic constituents of all stuff are called elements. They don't change into other elements through normal chemical processes and have distinct chemical and physical properties.
What does it imply of matter to use an example of matter?A substance that has a certain mass and volume over space and is commonly referred to as matter. Pencils, toothbrushes, water, and other items are examples of matters.
To know more about matter visit:
https://brainly.com/question/2246399
#SPJ4
Bromine is less reactive than fluorine because it is __________ for fluorine to gain an electron. What word completes the sentence?
Two or more than two atoms with different physical or chemical properties can not combine together to form an element. Therefore, bromine is less reactive than fluorine because it is easier for fluorine to gain an electron.
What is element?Element generally consist of atoms or we can atoms combine to form element. Atoms of an element is always same, means all the properties of all atoms of one type of element is same.
Electronegativity is the property of an element to gain shared pair of electron. On going down the group of periodic table, electronegativity decreases. The reason for decreasing electronegativity is the increase in the size of the element. Since bromine is larger in size than fluorine, so bromine is less electronegative than fluorine. Bromine is less electronegative than fluorine.
Therefore, bromine is less reactive than fluorine because it is easier for fluorine to gain an electron.
To know more about element, here:
https://brainly.com/question/8460633
#SPJ6
What volume of water would you add to 15. 0 ml of 12 m hcl to make it to 6. 0 m solution?.
30 ml volume of water have to add to 15. 0 ml of 12 m hcl to make it to 6. 0 m solution.
How do you calculate the volume of a solution needed?
Molarity, the most typical unit of concentration, is also the most helpful for calculating the stoichiometry of reactions in solution. The number of moles of solute contained in precisely 1 L of solution is known as the molarity, or M. In other words, it is the amount of millimoles of solute in exactly 1 mL of solution.Molarity = moles of solute / liters of solution.Anyone who has prepared instant coffee or lemonade before is aware that using too much powder results in a drink with a strong flavor and a high concentration of sugar, while using too little yields a diluted solution that may be difficult to differentiate from water. The amount of a solute present in a certain amount of solvent or solution is known as the concentration of a solution in chemistry.Given data
So first we set up the dilution equation: M1*V1=M2*V2
M: Molarity
V: Volume
We can set these equal in a dilution equation because Molarity is Miles per Volume, and by multiplying it by Volume we get Moles on each side. Moles of solute remain equal throughout a dilution since you are just adding water.
Next, we plug in our knowns:
(12.00M HCl)(15.00ml)=(6.00M HCl)(V2)
V2 = 15 X 12 / 6 = 30ML
Learn more about Molarity refer to :
https://brainly.com/question/26873446
#SPJ1
Ni(s)→Ni2+(aq)+2e−
Ag+(aq)+e−→Ag(s)
Which of the following is the balanced net ionic equation for an oxidation-reduction reaction between Ag+(aq) and Ni(s)based on the half-reactions represented above?
2Ag+(aq)+Ni(s)→2Ag(s)+Ni2+(aq)2Ag+(aq)+Ni(s)→2Ag(s)+Ni2+(aq)
The net ionic reaction for the combination of nickel and sliver I ion is; [tex]Ni(s) + 2Ag^+(aq) ---- > Ni^{2+} (aq) + 2Ag(s)[/tex]
What is the net ionic reaction?We know that the net ionic reaction is the kind of reaction that shows only the ions that have undergone a change in the reaction. In this case we are looking at the reaction between Nickel and silver I ion.
We can see that the nickel was oxidized in the reaction but the silver I ion was reduced in the process and in this case we can see that it is indeed a kind of the redox reaction.
Learn more about net ionic reaction:https://brainly.com/question/28193640
#SPJ1
sodium carbonate (na2co3) is available in very pure form and can be used to standardize acid solutions. what is the molarity of an hcl solution if 33.3 ml of the solution is required to react with 0.256 g of na2co3?
The molarity of an HCl solution will be 0.145 M in the given solution.
The given data are;
volume of solution = 33.3 ml = 0.0333 L
mass of Na₂CO₃ =0.256 g
Step-by-step explanation:
The balanced equation for the reaction is;
2HCl(aq) + Na₂CO₃(s) → CO₂(g) + H₂O(l) + 2NaCl(aq)
Mol of HCl needed to react with 0.256g Na₂CO₃
= 0.256 g Na₂CO₃ × (1 mol Na₂CO₃ / 105.99 g Na₂CO₃) × 1 mol HCl /1 mol Na₂CO₃)
= 4.831 × 10 ⁻³ mol HCl
Molarity of HCl = mole of HCl / solution in L
= (4.831 × 10 ⁻³ mol HCl / 0.0333 L)
= 0.145 mole per L
= 0.145 M
Molarity is the number of moles of a substance consistent with the liter of the answer, also referred to as molar concentration.
Learn more about molarity here: https://brainly.com/question/23686981
#SPJ4
g the remainder of the acids are called weak acids. how do weak acids differ from strong acids in solution? explain using the ph and conductivity behavior observed.
A strong acid is one that entirely ionizes in aqueous solution. When dissolved in water, it always loses a proton (H+). Acid that only partially ionizes in a solution is considered weak acid.
Only a small number of its (H+) atoms are released when it dissolves in water and it also can be explained by Conductivity .
What is Conductivity ?An electrolyte solution's conductivity is a gauge of how well it conducts electricity. In the SI, conductivity is measured in Siemens per meter.
Conductivity is a helpful indicator of water quality in general. Every body of water has a typical conductivity range that, once determined, can be used as a reference point for comparison with routine conductivity tests.
While electrical conductance is a characteristic of a specific electrical component, electrical conductivity is a quality of the substance itself (such as silver) (like a particular wire). The amount of voltage needed to for a given amount of electric current to flow is known as electrical conductivity.
What are weak acids ?An acid that partially separates into its ions in water or an aqueous solution is referred to as a weak acid. On the other hand, in water, a strong acid completely dissociates into its ions. While the conjugate acid of a weak base is also a weak acid, the conjugate base of a weak acid is also a weak base.
The ability of acidic and basic solutions to conduct electricity is referred to as strong and weak. Strong electrical conductivity indicates that an acid or base is a strong acid or base. A weak acid or base is one that conducts electricity only slightly.
To know more about Conductivity please click here ; https://brainly.com/question/24943129
#SPJ4
Two posssible lewis structures for the molecule hcn are given. Determine the formal charge on each atom in both structures.
From the Lewis structures of the compound, the formal charge is -1 and rests on the nitrogen atom.
What is the formal charge?We know that the formal charge has to do with the charge that the specie appears to have. We have to look at the structure and consider the number of the electron pairs on each of the elements in the compound and then this would help us to be able to decide the formal charge that would be on each structure.
Hence, upon a careful consideration of the structures we can see that the formal charge that can be found on each of the structures for the hydrogen cyanide is -1 and we are now faced with deciding the atom that should carry this formal charge.
Given that the nitrogen atom is more electronegative than the carbon atom then the negative charge ought to rest on the nitrogen rather than on the carbon atom.
Learn more about Lewis structures:https://brainly.com/question/20300458
#SPJ1
Does magnesium oxide treat indigestion?.
Different applications for magnesium oxide exist. As an antacid, some individuals take it to treat acid indigestion, sour stomach, and heartburn. In order to quickly and temporarily clear the bowels.
As a naturally occurring form of periclase, magnesium oxide (MgO), often known as magnesia, is a white hygroscopic solid mineral (see also oxide). MgO is its empirical formula, and it is made up of a lattice of Mg2+ and O2 ions that are bound together by ionic bonding. Magnesium hydroxide is created when magnesium and water are present (MgO + H2O Mg(OH)2), although this reaction may be stopped by heating the solution to eliminate the moisture.
Magnesium oxide was once referred to as magnesia alba, or the "white mineral from Magnesia," to distinguish it from the "black mineral," or "magnesia Negra," which included what is now recognized as manganese.
The chemical magnesium peroxide, commonly known as MgO2, is also known as "magnesium oxide," although the term often refers to MgO. MgO2 is thermodynamically stable, according to evolutionary crystal structure prediction.
Learn more about magnesium oxide here:
https://brainly.com/question/25939029
#SPJ4
The nature of a volcanic eruption (i.e. how explosive) is determined largely by the _____ of the magma.A) pressureB) colorC) densityD) chemistryE) temperature
The nature of a volcanic eruption (i.e. how explosive) is determined largely by the chemistry of the magma.
What is meant by volcanic eruption ?When lava and gas are released from a volcano, often explosively, this is known as an eruption. The most dangerous sort of eruption is known as a "glowing avalanche," which happens when recently erupted lava rolls down a volcano's flanks.
When magma, or molten rock, rises to the surface, volcanoes erupt. When the earth's mantle melts, magma is created. Where tectonic plates are separating or being driven beneath one another, melting may occur. Magma rises towards the Earth's surface because it is lighter than rock.
Volcanoes erupt with a powerfully destructive mixture of ash, lava, hot, toxic gases, and rock. Explosions from volcanoes have claimed lives. Volcanic eruptions can bring forth additional health risks such wildfires, floods, mudslides, electricity outages, and contaminated drinking water.
To learn more about volcanic eruption refer to:
https://brainly.com/question/824390
#SPJ4
Which of the following metals would form the strongest metallic bond?
lithium
magnesium
silver
cobalt
copper
iron
Cobalt will form strongest metallic bond among lithium, magnesium, silver, copper and iron.
The bond with the highest attraction between the particles is the strongest bond. The main factors that can influence the potency of the metal to metal attraction. First, the bond becomes stronger the more valence electrons a metal has. The additional electrons will strengthen the overall forces that attract the positive ions. The quantity of unpaired electrons affects how strong a metallic connection is. The bond strength increases with the amount of unpaired electrons. Cobalt exhibits greater bonding as a result of having the most unpaired electrons.
Hence, cobalt form strongest metallic due maximum unpaired electrons
To know more about metallic bond.
https://brainly.com/question/29400906
#SPJ1
If the solvolysis of 1-bromoadamantane was carried out in 30% ethanol instead of 40% ethanol, would you expect the solvolysis rate to be faster, slower or unchanged?
A. Faster
B. Slower
C. Unchanged
If 1-bromoadamantane was solvolyzed in 30% ethanol as opposed to 40% ethanol, the process would be slower.
Why do you use the word "ethanol"?A renewable fuel called ethanol is produced form corn or other plant components. The United States uses ethanol extensively, and far more than 98% of fuel contains some ethanol. E10, which contains 10% ethanol and 90% gasoline, is the most popular ethanol blend.
Can people consume ethanol?Over 2 billion people use ethanol (also known as ethyl alcohol) day after day. Yeast, sugars, mixed starches are fermented to create this kind of alcohol. People have been using ethanol-based beverages like beer and wine for generations to alter their mood.
To know more about Ethanol visit:
https://brainly.com/question/25002448
#SPJ4
water contributes to mass movement in of all of the following ways except to group of answer choices fill pore spaces between particles which disrupts cohesion reduce friction between particles cement particles together add weight to the mass of the material
3) Cement particles together: Water does not physically or chemically bind particles together.
Instead of binding particles together, it weakens the cohesion between them, making them more likely to move under the influence of gravity in processes such as landslides, mudflows, and creep.
When water enters the pore spaces between particles, it can increase the pore pressure and reduce the friction between particles, making them less stable.
This can cause soil particles to become saturated and start to move, resulting in the mass movement. Additionally, water adds weight to the mass of the material, making it more susceptible to mass movement.
Hence, the correct choice is to Cement particles together.
To know more about the chemical properties of water, click here:
https://brainly.com/question/17184293
#SPJ4
What type of chemical is reacted with oxygen in a combustion reaction?.
Hydrocarbons are molecules consisting of both hydrogen and carbon reacts with oxygen in a combustion Reaction.
A combustion reaction occurs when oxygen gas (O2) reacts with certain types of compounds. We often call the other compound fuel. A more familiar term for combustion reactions is burning. The most common products of combustion reactions are carbon dioxide and water. Combustion is a high-temperature exothermic (heat releasing) redox (oxygen adding) chemical reaction between a fuel and an oxidant, usually atmospheric oxygen, that produces oxidized, often gaseous products, in a mixture termed as smoke. When a fuel is burned, oxygen in the combustion air chemically combines with the hydrogen and carbon in the fuel to form water and carbon dioxide, releasing heat in the process. Hydrocarbons reacts with oxygen as it has both hydrogen and carbon.
To learn more about Combustion Reaction please visit:
https://brainly.com/question/10458605
#SPJ4
when collecting gases over water, the pressure of the pure gas being collected is called the
The pressure of a pure gas is referred to as the dry gas pressure when gases are being collected over water.
what is dry gas pressure?
It can be challenging to determine the mass of gases because of their low densities. It is usual practise to collect gas over water in order to measure the height of displaced water. To do this, insert a tube into an upside-down bottle whose opening is submerged in a bigger container of water. Dalton's Law must be applied to take water vapor into account when estimating the volume of gas that was collected.
The height of the water displaced in the tube can be used to calculate the overall pressure inside the pneumatic trough device, which is used to collect a gas over water.
To learn more about dry gas pressure https://brainly.com/question/29694130
#SPJ4
Does lithium and oxygen form an ionic compound?.
An ionic connection is created by lithium and oxygen. Each lithium atom contains one valence electron since it belongs to group 1A. This is lithium's Lewis valence electron structure.
What does a valence mean for an electron?Valence electrons are the electrons located in the atom's outermost shell, or energy level. One such example is oxygen, which has six valence electrons, two of which are located in the 2s subshell whereas four of which are located in the 2p subshell. An expression for oxygen's valence electron configuration is 2s22p4.
In layman's words, what does the term "valence electron" mean?The electrons that make up an atom's shell are known as valence electrons. Due to the fact that when two atoms engage, their outermost electrons make contact with one another first but are the ones that control how an atom will respond in a chemical reaction.
To know more about valence electron visit:
https://brainly.com/question/12717954
#SPJ4
Which of the following would you least expect to find in CaCl2(aq)?
a. H2O molecules
b. CaCl2 molecules
c. Ca2+ ions
d. Cl− ions
Ions can be made by single element or covalently bonded group of elements. The covalently bonded group of elements is called polyatomic ions or polyatomic atoms. Therefore the correct option is option D.
What is Ions?Any species that contain charge whether it is positive charge or negative charge is called ions. The example of polyatomic ions are sulfate, phosphate, nitrate etc.
Cation is the species that loose electron and attain positive charge while anion is a species which gain electron and attains negative charge so when anion and cation combine in fixed ration the the overall charge of the molecule is zero that is molecule is neutral, the charge over cation and anion is also called oxidation state.
In CaCl[tex]_2[/tex](aq), CaCl[tex]_2[/tex] molecules, H[tex]_2[/tex]O molecules, Ca²⁺ ions and Cl⁻ ions will be present.
Therefore the correct option is option D.
To learn more about ions, here:
https://brainly.com/question/13692734
#SPJ1
which carbon-to-hydrogen mass ratio is possible for another compound composed only of carbon and hydrogen? which carbon-to-hydrogen mass ratio is possible for another compound composed only of carbon and hydrogen? 4.66 5.95 7.89 2.80
The carbon-to-hydrogen mass ratio possible for another compound composed only of carbon and hydrogen is 2.80; option D.
What are hydrocarbons?
Hydrocarbons are compounds that are composed of only carbon and hydrogen alone.
Hydrocarbons are usually obtained naturally from petroleum.
The common hydrocarbons are:
alkanes - these hydrocarbons have single carbon-carbon covalent bondsalkenes - these hydrocarbons have at least one double carbon-carbon covalent bond.alkynes - these hydrocarbons have at least one triple carbon-carbon covalent bond.Learn more about hydrocarbons at: https://brainly.com/question/1489747
#SPJ1
What property of substance is illustrated when a wet shirt dries up?.
Evaporation is a type of vaporization of a liquid that occurs from the surface of liquid into gaseous phase that is not saturated with the evaporating substance.
What is Evaporation ?On the surface of a liquid as it transitions into the gas phase, evaporation is a type of vaporisation that takes place. When the rate of evaporation of water is affected by humidity, for example, a high concentration of the evaporating substance in the surrounding gas significantly slows down evaporation.
The liquid water that was on the object evaporates to water vapour and diffuses into the air, which is why a wet object dries.Drying wet clothing causes the water molecules on the surface to acquire latent heat of vapourization, turn into vapour, and separate from the fabric's surface. Evaporation is the name of this process.Learn more about Evaporation here:
https://brainly.com/question/24258
#SPJ4
