a new benzene/toluene solution is prepared, but with different proportions, this time, the mole fraction for benzene is 0.9. what are the mole fractions for each substance in the vapor phase

The number of grams in 1.70 moles of manganese is 93.5grams.

The mass of a substance can be calculated by multiplying the number of moles in the substance by its molar mass as follows:

mass = molar mass × no of moles

According to this question, a student has 1.70 moles of manganese. The number of grams of manganese that they have can be calculated as follows:

molar mass of Manganese = 55g/mol

mass = 1.70 × 55

mass = 93.5g

Therefore, 93.5grams is the mass of manganese

Learn more about mass at: https://brainly.com/question/12127540

#SPJ1

The rate constant of the reaction is [tex]0.0369 min^{-1}[/tex], where 50.0% of a compound decomposes in 19.0 min.

In a first-order decomposition reaction, the rate of reaction is proportional to the concentration of the reactant. The rate constant, k, describes the rate of the reaction and is related to the half-life of the reaction, t1/2, by the equation:

t1/2 = 0.693/k.

In this case, since 50.0% of the compound decomposes in 19.0 min, the half-life of the reaction can be calculated as follows:

t1/2 = 19.0 min * (1 - 0.50)^(1/2) = 13.5 min.

The rate constant can then be calculated using the equation:

k = 0.693/t1/2 = [tex]0.0369 min^{-1}[/tex].

This value of k can be used to predict the rate of reaction at any time during the decomposition, as well as to compare the rate of the reaction to other first-order decomposition reactions.

Learn more on first-order decomposition reactions:

https://brainly.com/question/13266271

#SPJ4

Chromium acetate is diamagnetic because it does not have any unpaired electrons in its orbitals, which are required for magnetic behavior.

Diamagnetic materials are materials that are not attracted to magnetic fields, and they behave in a manner that is opposite to magnetic materials, known as paramagnetic materials.

Chromium acetate has a complete electron shell configuration with all electrons paired, which means that the electrons are paired in the orbitals, and there is no net magnetic moment.

As a result, chromium acetate does not exhibit any magnetic properties and is considered to be diamagnetic.

The diamagnetic behavior of chromium acetate can be explained by the principles of quantum mechanics and the orbital configuration of the atoms in the molecule.

Learn more about the diamagnetic nature , please visit the link given below;

https://brainly.com/question/29277857#

#SPJ11

The volume of 0.0500 mol/L Kmn04 required is 0.00083 / 0.0500 = 0.0167 L = 16.7 mL, rounded to 20.0 mL.

To balance the equation, we need to add 5 electrons to the right side to match the electrons on the left side:

MnO4^- + 8H^+ + 5e^- -> Mn^2+ + 4H2O

Br^- + 2H^+ + 1e^- -> Br2 + H2O

Adding the two reactions together, we get:

MnO4^- + 8H^+ + 5e^- + Br^- + 2H^+ + 1e^- -> Mn^2+ + 4H2O + Br2 + H2O

This reaction requires 6 electrons in total, which means that 6 moles of Br^- will be oxidized by 1 mole of MnO4^-.

Since the concentration of NaBr is 0.200 mol/L, there are 0.200 x 25.0 mL / 1000 mL = 0.005 mol of Br^- in the solution.

To oxidize all the Br^-, we need 0.005 / 6 = 0.00083 moles of MnO4^-

So the volume of 0.0500 mol/L Kmn04 required is 0.00083 / 0.0500 = 0.0167 L = 16.7 mL, rounded to 20.0 mL.

Learn more about volume here:

https://brainly.com/question/13338592

#SPJ4

When CH₃CH₂CH₂CH₂OH undergoes alpha cleavage (See Pic2), the major fragment produced is CH₃CH₂CH₂CH₂.

The act of disassembling a molecule's molecular structure into smaller parts or fragments is referred to as fragmentation. Chemical processes, collision-induced dissociation, and photodissociation are just a few of the mechanisms that might cause this. By causing molecular ion fragmentation and examining the resultant fragments, fragmentation is a frequently used technique in mass spectrometry to ascertain the structure of a molecule. The distribution and intensity of the fragments can reveal crucial details about the chemistry and make-up of the original molecule.

By eliminating the alpha carbon and the hydrogen that is connected to it, alpha cleavage causes the carbonyl carbon and the beta carbon to establish a new carbon-carbon bond.

Learn more about carbon-carbon bond

brainly.com/question/12156863

#SPJ4

The complete question is:

Provide the structure of the major fragment that results when the molecular ion of ch3ch2ch2ch2oh undergoes fragmentation via alpha cleavage (See Pic1).

1) I

2) II

3) III

4) IV

5) V

31.25 °C is the temperature at which a 0.291 m solution of magnesium sulfate in water exhibit an osmotic pressure of 14.0 atm.

The physical concept of temperature indicates in numerical form how hot or cold something is. A thermometer is used to determine temperature. Thermometers are calibrated using a variety of temperature scales, which historically defined distinct reference points and thermometric substances. The most popular scales are the Celsius scale, sometimes known as centigrade, with the unit symbol °C, the Fahrenheit scale (°F), and the Kelvin scale (K), with the latter being mostly used for scientific purposes. One of the International System of Units' (SI) seven base units is the kelvin.

π = MRT

14.0 atm = M(0.08206 L·atm/K·mol)T

M = 214.5/T

0.291 L = moles of solute / 1 L

moles of solute = 0.291 M

moles of [tex]Mg^2+[/tex] = 2 x moles of MgSO[tex]_4[/tex]= 2 x 0.291 M = 0.582 M

Π = iMRT

Π = 3 x 0.582 M x (0.08206 L·atm/K·mol) x T

14.0 atm = 0.448 Atm·K·mol/L x T

T = 31.25 °C

To know more about temperature, here:

https://brainly.com/question/7510619

#SPJ12

Metals are generally associated with the highest density values at room temperature.

A metals is a substance that, when freshly prepared, polished, or broken, exhibits a brilliant look and conducts electricity and heat quite well (from the Greek word métallon, "mine, quarry, metal"). Typically, metals are malleable and ductile (can be drawn into wires) (they can be hammered into thin sheets). These characteristics are the outcome of the metallic link that exists between the metal's atoms or molecules.A metal can be a chemical element like iron, an alloy like stainless steel, a molecular complex like polymeric sulphur nitride, or any combination of these.

To know more about metals please refer:

https://brainly.com/question/29404080

#SPJ4

The solution of CaCl₂ in water forms the mixture that contains  28 % of calcium chloride by the mass. If the total mass of the mixture is 574.2 g, the masses of  CaCl₂  161.17 and  the water used is 413 g.

The mass percent = (Mass of CaCl₂ / (mass of CaCl₂ +  mass of H₂O)) × 100%

28 % = (Mass of CaCl₂ / (mass of CaCl₂ +  mass of H₂O)) × 100%

The total mass of the mixture = 574.2 g

Mass of CaCl₂ + mass of H₂O = 574.2 g

By solving the formula, we get :

Mass of CaCl₂ = (28/100) × (mass of CaCl₂ + mass of H₂O)

Mass of the CaCl₂ = = (28/100) × 574.2 g

Mass of CaCl₂ = 161.17 g

The mass of the water, H₂O  =  574.2g - 161.176g

                                                = 413 g

To learn more about mass here

https://brainly.com/question/30395419

#SPJ4

Decreasing the H(aq) ions concentration results in dilution of acids.

If a solution has higher concentration of H+ ions it is more acidic in nature. A given solution of an acid is diluted by adding more water. Thus, the overall volume of the solution increases.

The concentration of hydronium ions decreases when an acid is diluted because on adding water the H+ ions of the acid and hydroxyl ions of water react to form water molecules and the concentration of hydronium ions decreases.

Therefore, the number of hydrogen ions per unit volume decreases and hence the concentration of hydrogen ions decreases.

To know more about the dilution of acids, here

brainly.com/question/13800371

#SPJ4

The s subshells are located in the first two columns on the left side of the periodic table. The highest s and p orbitals, known as the valence shells, are where electrons are frequently taken out of molecules.

The s subshells are located in the first two columns on the left side of the periodic table. As a result, the periodic table's first two rows are referred to as the "s block." the columns of the periodic table that are occupied by s subshells. Likewise, the p block The highest s and p orbitals, known as the valence shells, are where electrons are frequently taken out of molecules. The s subshells are located in the first two columns on the left side of the periodic table. As a result, the periodic table's first two rows are referred to as the "s block." the columns of the periodic table that are occupied by s subshells. As with the p block.

Learn more about electrons here-

https://brainly.com/question/28977387

#SPJ4

C₆H₁₂O₆ is the most likely molecular formula for the substance shown in the given mass spectrum picture (See Picture 3).

This is because the mass spectrum shows that the peak with the highest abundance happens at a m/z value of 180, which is the same as the molecular mass. of C₆H₁₂O₆.

Half the molecular mass, or the m/z value of 90, corresponds to the second-most prevalent peak. Given that carbohydrates often have molecular formulae that are a multiple of C₆H₁₂O₆, this shows that the molecule in question is most likely a carbohydrate.

Furthermore, the existence of a fragment signal at m/z 162 indicates that the molecule has an additional oxygen atom over that is C₆H₁₂O₆. This is consistent with the molecule being a carbohydrate because these molecules frequently have an extra oxygen atom.

To learn more about mass spectrum visit:

brainly.com/question/10873109

#SPJ4

The complete question is:

What is the most likely molecular formula for the compound represented in the above mass spectrum (See picture 3)? Subscripts must be used when writing the formula.

The nature of science (NOS) is a crucial part of scientific literacy that improves students' comprehension of scientific ideas and empowers them to make rational decisions about personally and socially relevant scientific concerns.

A specific method of comprehending the natural world is through science. It broadens the innate curiosity we all possess at birth. One may easily tell science apart from non-science by having a basic understanding of how it operates.

Derek Hodson, a scientist and scientific educator, likens the process of teaching science to that of an anthropological imparting knowledge about a different culture.

Therefore, Both can be seen of as involving a tribe of individuals who have a certain body of knowledge, a particular language, customs, rituals, traditions, attitudes, and values.

Learn more about science here:

https://brainly.com/question/1872842

#SPJ4

The nature of science (NOS) is a crucial part of scientific literacy that improves students' comprehension of scientific ideas and empowers them to make rational decisions about personally and socially relevant scientific concerns.

A specific method of comprehending the natural world is through science. It broadens the innate curiosity we all possess at birth. One may easily tell science apart from non-science by having a basic understanding of how it operates.

Derek Hodson, a scientist and scientific educator, likens the process of teaching science to that of an anthropological imparting knowledge about a different culture.

Therefore, Both can be seen of as involving a tribe of individuals who have a certain body of knowledge, a particular language, customs, rituals, traditions, attitudes, and values.

Learn more about science here:

brainly.com/question/1872842

#SPJ4

The fundamental idea behind Sahli's acid haematin technique is that hemoglobin is changed into acid haematin by the action of HCl, which results in a brown color.

The International Committee for Standardization in Haematology recommends the direct cyanmethaemoglobin method2 as the method that is most frequently used to estimate hemoglobin quantitatively. It is comparatively easy and inexpensive, because it involves the creation of cyanmethaemoglobin, a stable compound3. Blood's hemoglobin content can be found out using Sahli's method. The haemoglobin content of blood samples is determined using Sahli's haemoglobinometer by converting hemoglobin to hematin acid, which is then diluted to produce hematin acid that matches the comparator's color.

Learn more about hemoglobin here:

https://brainly.com/question/15011428

#SPJ4

211.454 grams of K2CO3 are included in 1.53 moles of K2CO3.

In the International System of Units, the mole (sign mol) is the unit of material quantity. The amount of substance is a measurement of how many elementary entities of a certain substance are present in an object or sample. The mole is defined as having 6.022140761023 basic entities. A mole is a crucial unit of measurement for chemists. A mole of anything equals 602,214,076,000,000,000,000,000 of that item, just as a dozen eggs equals twelve eggs. Chemists must use moles to measure very tiny objects such as atoms, molecules, or other particles.

Here,

1 mole is equal to 1 moles K2CO3, or 138.2055 grams.

grams are in 1.53 moles of K₂CO3,

=211.454 grams

1.53 moles of K₂CO3 contains 211.454 grams of K₂CO3.

To know more about moles,

https://brainly.com/question/30373566

#SPJ1

The amount of CH3CH2Cl formed is a function of the amount of CH4 and Cl2 present and can be calculated using the stoichiometric ratios.

Assuming a 1:1 ratio of CH4 and Cl2, a very small amount of CH3CH2Cl will be formed.

1) The chlorination of CH4 begins with the attack of chlorine radicals on the methane molecule, forming a methyl radical and a hydrogen chloride molecule:  CH4 + Cl2 → CH3• + HCl.

2) The methyl radical then reacts with another chlorine radical to form an ethyl radical and a chlorine molecule: CH3• + Cl2 → CH3CH2• + Cl.

3) The ethyl radical then reacts with a chlorine molecule to form an ethyl chloride molecule and a hydrogen atom: CH3CH2• + Cl → CH3CH2Cl + H•.

4) Finally, the hydrogen atom reacts with a chlorine molecule to form another hydrogen chloride molecule and a chlorine atom: H• + Cl2 → HCl + Cl.

Overall, the reaction can be written as: CH4 + Cl2 → CH3CH2Cl + HCl. The amount of CH3CH2Cl formed is a function of the amount of CH4 and Cl2 present and can be calculated using the stoichiometric ratios. Assuming a 1:1 ratio of CH4 and Cl2, a very small amount of CH3CH2Cl will be formed.

Learn more about stoichiometric ratios here:

https://brainly.com/question/6907332

#SPJ4

The flask in which the molecules will have the greatest average velocity is Flask A which contains Carbon monoxide at 855 torrs and 5°C.

The correct option is A.

The average velocity of gases is directly proportional to the pressure and temperature of gases.

This means that the greater the pressure of the gases, the greater will be the average velocity of the gases.

Also, the greater the temperature of the gases, the greater will be the average velocity of the gases.

Flask A contains gas at the highest pressure.

Learn more about the pressure and temperature of gases at: https://brainly.com/question/24719118

#SPJ1

If multiple tests are conducted with the same sample, the boiling point of a pure chemical (2-bromo-2-methylpropane) should remain constant.

The intermolecular forces in a substance control its boiling point, which is a physical characteristic that never changes. If multiple tests are conducted with the same sample, the boiling point of a pure chemical (2-bromo-2-methylpropane) should remain constant. The intermolecular forces in a substance control its boiling point, which is a physical characteristic that never changes. The boiling point should not change as long as the sample is unaltered and pure. When a non-volatile solute is introduced to a solvent, boiling point elevation happens, raising the boiling point of the resulting mixture.

Learn more about intermolecular here-

https://brainly.com/question/9007693

#SPJ4

The possible cause for a sodium hypochlorite pump not feeding the proper amount and resulting in a decrease in residual could be: Clogged feed lines, Worn or damaged pump components, Incorrectly set feed rate or Electrical or mechanical failure of the pump.

It is recommended to check and correct these issues to ensure proper operation of the sodium hypochlorite feed pump. These include clogged feed lines, worn or damaged pump components, an incorrectly set feed rate, or electrical or mechanical failure of the pump.

It is important to identify and address the underlying cause in order to ensure proper operation and reliable performance of the pump. Professional inspection and maintenance of the system may be necessary in order to resolve the issue and prevent future problems.

To know more about sodium hypochlorite, click here.

https://brainly.com/question/29708118

#SPJ4

Answer:

m sorry, I cannot provide a numerical response for this question because the information provided does not include a standard curve of mass vs volume for a series of solutions, it is not possible to determine the concentration of an unknown solution from the information given. In order to determine the concentration, we would need a graph with known mass and volume data points, as well as the equation of the line that fits the data points. Then we would use the density of the unknown solution and the volume to solve for mass, then use the mass and volume to determine the concentration of the unknown solution.

Pose an inquiry.Create an explanation that can be tested.In light of the theory, make a forecast.Formal sciences: the investigation of a priori, as opposed to empirical, systems, such as those found in the fields of logic and mathematics.

To learn more about  develop new chemical refer

https://brainly.com/question/12179527

#SPJ1

The fraction of sites vacant at 1084 c is 4.55 x 10⁻⁴

Crystals are naturally imperfect, which is referred to as cystallographic defects. Point defects describe the imperfections of solids as well as the different types of point defects. A type of point defect is Stoichiometric defect and a type of Stoichiometric defect is a vacancy defect. A vacancy is a type of point defect in crystallography in which an atom is missing from one of the lattice sites. This results in a decrease in the crystal's density.

Temperature (T) in kelvin = 1084+273 = 1357K

Energy for vacancy formation (Qv) = 86.9 kj/mol = 0.9 eV

Boltzmann constant(k) = 8.62 x 10⁻⁵ eV/atom-K

For a fraction of atoms, formula : Nv/N = exp(-Qv/kT)

Nv/N = exp (-0.9/ 8.62 x 10⁻⁵ x 1357)

Hence, Nv/N (fraction of sites vacant) = 4.55 x 10⁻⁴

To know more about fraction of vacant sites, click here : https://brainly.com/question/26531245

#SPJ4

The enthalpy of complete combustion of natural gas (methane) to give gaseous products is -890.3 kJ/mol.

The complete combustion of methane (CH4(g)) results in the formation of carbon dioxide (CO2) and water vapor (H2O(g)). The standard enthalpy change for this reaction, ΔH°, is the enthalpy of complete combustion of natural gas.

The standard enthalpy of formation for methane is -74.87 kJ/mol and for carbon dioxide is -393.5 kJ/mol. The standard enthalpy of formation for water is -285.8 kJ/mol.

The standard enthalpy change for the reaction can be calculated using the standard enthalpies of formation of the reactants and products:

ΔH° = ΔH°f (products) - ΔH°f (reactants)

ΔH° = [(2 x -285.8) + (-393.5)] - [-74.87 + (2 x 0)]

ΔH° = (-285.8 x 2) - 393.5 + 74.87

ΔH° = -890.3 kJ/mol

So, the enthalpy of complete combustion of natural gas (methane) to give gaseous products is -890.3 kJ/mol.

Learn more about enthalpy here:

https://brainly.com/question/13996238

#SPJ4

White balance is an important setting in photography that adjusts the overall color temperature of an image. To photograph silver or white gold jewelry and reduce the yellow or orange tint.

Follow these steps: Use a gray card: Place a gray card next to the jewelry and take a photo. Then, in post-processing software, use the white balance tool to select the gray card and adjust the white balance.

Use a custom white balance: Take a photo of the jewelry with a neutral color, such as white or gray, in the same lighting conditions. Then, in post-processing software, use the custom white balance tool to set the white balance based on this image.

Manually adjust the white balance: If you do not have access to a gray card or a neutral color, you can manually adjust the white balance in post-processing software by adjusting the temperature and tint sliders until the jewelry appears white or silver in the image.

It's also important to consider the lighting conditions when photographing jewelry. Using a color-corrected light source, such as daylight-balanced LED lights, can help reduce the yellow or orange tint in the image.

To know more about gold jewelry here

https://brainly.com/question/14525451

#SPJ4

Answer:

According to the law of dominance, a trait is represented by two contrasting factors of a gene in a heterozygous individual; the allele/factor that can express itself in the heterozygous individual is called as a dominant trait. The other factor whose effect is masked by the presence of the dominant factor is called recessive factor. Thus, a cross between pure breeding tall (TT) and dwarf (tt) pea plants will obtain all hybrid tall (Tt) offspring in F1 generation. According to the law of segregation, the two factors for a trait, present together in heterozygous tall plants, do not get mixed and are separated during gametogenesis. Thus each gamete receives one allele for a trait and two types of gametes are formed, 50% gametes carry factor for dominance (T) and 50% carry the recessive factor (t). Random fusion of these gametes from two-hybrid tall plants produces tall and dwarf F2 plants in a 3:1 ratio.

If the reaction is first order with respect to x and second order with respect to y, the rate law can be written as rate = k[X]⁻¹[Y]⁻².

Starting with known concentrations of x and y in experiment 1, the initial rate of formation of z was measured. The initial rate of formation of z in experiment 2 would depend on the new concentrations of x and y. If the new concentrations are different from the initial concentrations used in experiment 1, the initial rate of formation of z in experiment 2 will also be different.

To determine the initial rate of formation of z in experiment 2, the rate law equation would need to be used with the new concentrations of x and y. The units of k, the rate constant, determine the units of the rate.

To know more about first order here

https://brainly.com/question/13329678

#SPJ4

--The given question is incomplete, the complete question is

"738; (1,45)(0.042 T Jath) 8518,314(308) 4 OO (3.O0)L85) Ttn (0.0821)(35.0) Enic snele Initial Rate of (Ylo Formation of (moLL- sec 0.101 9l 0.20 Experiment (Xlo 0.40 0.20 The table above shows the results from rate study of the reaction X+Y 2. Starting with known concentrations of X and Y in experiment 1,the rate of formation of Z was measured. If the reaction was first order with respect to( X and second order with respect t0_Y! the initial rate of formation of 2 experiment 2 would be (A) R (B) 2 Cx]" [Y]' 2R Y 1 = 2 1 4R."--

According to Le Chatelier' principle, if a ytem in dynamic equilibrium contain a large excess of reactant, to encourage the formation of more product we can remove product from the system as it is formed.

A system in dynamic equilibrium will respond to a stress (change in conditions) in a way intended to reduce that stress. This is the guiding idea of Le Chatelier.

We want to influence the system's response so that it produces more product.  A reduction in product results from adding stress to the system by removing some of the product. The system's response is to move the equilibrium to the right to boost product production in order to reduce the stress.

learn more about Le Chatelier' principle at https://brainly.com/question/29195371

#SPJ4

Answer: If 550 ml of gas at 1 atm expands to 960 ml, the pressure will be 0.57 atm.

Explanation:

It is an exercise of Boyle's Law that says: "At constant temperature the volume of a mass of a gas is inversely proportional to the pressure it exerts".

This means that if the volume is doubled the pressure is halved, and if the pressure is increased three times as much, the volume will be one third (1/3) of what it originally was.

The word inversely proportional means that if the pressure increases the volume decreases but proportionally.

550 mL of gas at I atm is expanded to 960 mL. What will the pressure be?

Data:

V₁ = 550 mL

P₁ = 1 atm

V₂ = 960 mL

P₂ = ?

The formula of this law is:

Where

He asks us what the pressure would be after 960 mL, we solve the formula for the final pressure, then

[tex]\boxed{\bold{P_1V_1=P_2V_2 \iff \ P_2=\frac{P_1V_1}{V_2} }}[/tex]

We substitute our data in the cleared formula and solve:

[tex]\boxed{\bf{P_2=\dfrac{(1 \ atm \ \times \ 550\not{mL}) }{960\not{mL}} }}[/tex]

[tex]\boxed{\bf{P_2=0.57 \ atm }}[/tex]

If 550 ml of gas at 1 atm expands to 960 ml, the pressure will be 0.57 atm.

At low temperature in a polycrystalline metal, the electron scattering length can sometimes be approximated by the crystal grain size. a. for silver at room temperature, what is the critical grain size where this effect becomes important? b. what is the critical grain size at 500 oc?

a. The critical grain size at room temperature (approximately 20°C) for silver where the electron scattering length can be approximated by the crystal grain size is not a well-defined value and can vary based on various factors such as the purity and crystal structure of the metal.

b. The critical grain size at 500°C for silver where the electron scattering length can be approximated by the crystal grain size is also not a well-defined value and would depend on various factors such as the purity and crystal structure of the metal. Additionally, the temperature may affect the electron scattering length and grain size, making it difficult to accurately predict the critical grain size.

Temperature, or temperature is a measure of the level or degree of heat on an object. Temperature shows the level of the amount of heat energy that is in the object.

Discussion:

The higher the temperature of an object, the hotter it is, and the more heat energy is in that object. The tool for measuring temperature is a thermometer.

For example, hot water has more heat energy than cold ice.

Temperature is one of the basic quantities, which cannot be derived from other quantities. Temperature is measured in Kelvin (in the International System), but in everyday use the most common measurement is degrees Celsius (°C). For example, the temperature of freezing water is 0°C, the temperature of the human body is about 37.5°C and the temperature of boiling water is about 100°C.

The Kelvin scale has many scientific uses, such as calculating temperature and its change in an ideal gas. The kelvin is the SI unit for temperature, where 0 K is absolute zero (at which there is no movement of particles, which is equivalent to -273 °C.

Learn More About Temperature at https://brainly.com/question/4658134

#SPJ4

CuSO₄+D₅H₂O is a crystalline compound referred to as a(n)  hydrate .

A crystalline compound is made up of particles or molecules that are arranged in a particular order to produce an ordered structure. Examples of crystalline compounds include water molecules and ice particles.

Crystals, also known as crystals, have distinct internal structures that result in distinct faces, or flat surfaces. The angles at which the faces meet are typical of the substance. Each structure also produces a distinctive pattern when exposed to x-rays, which can be used to identify the material.

Learn more about crystalline compounds:

brainly.com/question/28972400

#SPJ4