The average atomic mass for the new element is given 81.5529 amu. The percentage abundance for the third isotope is 13.6 %. Then its atomic mass is 83.9 amu.
What are isotopes?Isotopes are atoms of same element with different atomic mass numbers. Almost all elements have two or more isotopes but not all of them are stable in nature.
The average atomic mass can be calculated from the isotopic mass and and percentage abundance as follows:
atomic mass = ∑ (isotopic mass × %abundance /100 )
Apply the isotopic mass and abundance of all isotopes given as follows:
atomic mass of the element = (76.12/100 ×81.6643 amu) + (10.27/100 × 81.1239 amu) + (13.6 /100 × X amu) =81.5529 amu.
Then,
(13.6 /100 × X amu) = 70.41 amu.
X = 83.9 amu.
Therefore, the atomic mass of the third isotope is 83.9 amu.
Find more on isotopes:
brainly.com/question/21536220
#SPJ9
LAPTOP CART 3
COMPUTER 15
Match the group with it's correct group name.
Group Name
1. alkaline earth metals
2. halogens
3. transiton metals
4. carbon family
5. noble gases
6. alkali metal
7. boron family
8. nitrogen family
9. oxygen family
Periodic Table Quiz
Group
a 1 or IA
-configuration
b. 2 or 2A
c. 3 or 3A
d.
14 or 4A
15 or SA
f. 16 or 6A
17 or 7A
b. 18 or SA
3B to 2B
Answer the following questions.
10. How many valence electrons do the halogens have in their valence shell?
11.How many valence electrons do the alkali metals have in their valence shell?
12. The maximum of valence electrons is?
13. The principle that the properties of the elements are arranged in increasing order of
their atomic numbers is called the
14. The group of eight electrons filling the s and p orbitals of the higher-most energy
level of an atom is called
15. Give the noble gas for Al
16. Give the configuration for Ca
17. Give the configuration for Ca ion
18. Give the configuration for the elements that are isoelectronic with Neon (Ne) when
they form a l' ion element name
e-configuration
e-configuration
19.
1-ion element name
20. Which group of elements is the least reactive?
fout act
l
wwww yo
WHEAT AND
Group 1 (Alkali Metals)
Group 2 (Alkaline Earth Metals)
Group I: Lithium and sodium make up the elements.
Chlorine and bromine are the elements in Group I7.
Neon and argon are the elements in Group I8.
What are halogens?
The only periodic table group with elements in all three of the primary states of matter at standard pressure and temperature—though not much above room temperature—is the group of halogens. In groups 1 and 15, the same holds true if white phosphorus is assumed to be the standard state.
All of the halogens react with hydrogen to create acids.
Minerals or salts are often used to manufacture the majority of halogens.
To know more about halogens, click the link given below:
brainly.com/question/11156152
#SPJ1
Count the number of atoms in the formula: 2Ca(OH)2
Ca atoms
There are
type your answer...
There are
type your answer...
There are type your answer...
O atoms
Hatoms
The total number of atoms is type your answer...
The total number of atoms in the formula is 2 + 4 + 4 = 10 atoms.
What are atoms?
An atom is the basic unit of matter and the defining structure of elements. The term "atom" comes from the Greek word for indivisible, because it was once thought that atoms were the smallest things in the universe and could not be divided.
Atoms are composed of a nucleus, which contains positively charged protons and uncharged neutrons, surrounded by a cloud of negatively charged electrons. The number of protons in an atom's nucleus determines what element the atom is, as each element has a unique number of protons.
To count the number of atoms in the formula 2Ca(OH)2, we need to determine the number of each type of atom present.
In this formula, there are:
2 calcium atoms (Ca)4 oxygen atoms (O)4 hydrogen atoms (H)So, the total number of atoms in the formula is 2 + 4 + 4 = 10 atoms.
https://brainly.com/question/6258301
#SPJ1
Which characteristic is not a periodic trend?
A. Atomic radius
B. Electron affinity
C. Ionization energies
D. Number of elements in a group
Answer:
Explanation:
D
Explain why phosphorus is a non-conductor of electricity.
Compound A + Compound B —> Compound C + Compound D
———
Identify the reaction type
The type of reaction shown is a double displacement reaction.
Types of reactionThe given chemical equation represents a chemical reaction known as a double displacement or metathesis reaction.
In this type of reaction, the cations and anions of two different compounds switch places, resulting in the formation of two new compounds.
In the given equation, Compound A and Compound B react to form Compound C and Compound D by exchanging their respective cations and anions.
More on double replacement reactions can be found here: https://brainly.com/question/29224660
#SPJ1
why polonium so easy to kill someone
Answer:
Polonium is a highly radioactive substance, meaning it emits ionizing radiation, which can cause harm to living organisms. When ingested or inhaled, polonium can damage internal organs, including the kidneys, liver, and bone marrow, and cause radiation sickness. This makes it a potent poison and an easy means to kill someone. Because of its toxic nature and the fact that it is not easily detectable, polonium has been used in assassination attempts, making it a dangerous substance to handle or be around.
Explanation:
Answer:
polonium is a highly radioactive and toxic element that can cause severs health problem if ingested or inhaled
Explanation:
HELP ! Pictures down below (70 points)
For a given mass of gas at a constant temperature, when volume decreases pressure increases.
For at a constant temperature, when mass decreases pressure increases.
What is the effect of a decrease in volume on the pressure of gases?According to Boyle's Law, at a constant temperature, the pressure of a gas is inversely proportional to its volume.
Thus, a decrease in the volume of a gas will result in an increase in pressure, assuming that the temperature and amount of gas remain constant.
Assuming that the temperature and volume remain constant, an increase in the mass of a gas will result in an increase in its pressure. This is because as the mass of the gas increases, the number of gas particles also increases, which leads to an increase in the frequency and force of their collisions with the container walls. These increased collisions result in an increase in the pressure of the gas.
Learn more about pressure and volume gases at: https://brainly.com/question/24719118
#SPJ1
If the volume of the reaction vessel in the previous part was 1. 25 l , what amount of br2 (in moles) was formed during the first 15. 0 s of the reaction?.
0.4 amount of br2 (in moles) was formed during the first 15. 0 s of the reaction.
A chemical reaction is a process that causes a chemical transformation of one set of chemicals into another. Classically, chemical reactions involve changes involving only the position of electrons in the formation and breaking of chemical bonds between atoms, and changes in the nucleus (no change in the elements present) can often be described by chemical equations. Nuclear chemistry is a subset of chemistry that involves the chemical reactions of unstable radioactive elements in which both electronic and nuclear changes can occur.
Now,
Correct option is (C)
N2 +O2 ⇌2NO
At t = 0 2 4 0
At eq. 2-x 4-x 2x
Half a mole of nitrogen is used up at equilibrium,
x = 0.5
So, moles of NO=1.
Molar concept of NO at equilibrium = 1/ 2.5
= 0.4.
Complete Question:
The equilibrium N₂(g)+O₂(g)⇌2NO(g) established in a reaction vessel of 2.5 L capacity. The amounts of N₂ and O₂ taken at the start were respectively 2 moles and 4 moles. Half a mole of nitrogen has been used up at equilibrium. The molar concentration of nitric oxide is :
(1) 0.2 (2) 0.8 (3) 0.6 (4) 0.1
Learn more about Reaction:
https://brainly.com/question/28984750
#SPJ4
For the following equation, assume you started with 15.6g potassium (K). How many moles of potassium oxide would be produced assuming you had unlimited oxygen? ____ K + ____ O2 → _____ K2O
According to the stoichiometry of the given chemical equation, 0.2 moles of potassium oxide would be produced assuming you had unlimited oxygen.
What is stoichiometry?Stoichiometry is defined as the determination of proportions of elements or compounds in a chemical reaction. The relations are based on law of conservation of mass and law of combining weights and volumes.
Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.
In the given equation,156 g potassium gives 188.4 g potassium oxide, thus, 15.6 g will give 15.6×188.4/156=18.84 g potassium oxide which is 18.84/94.2= 0.2 moles.
Thus, 0.2 moles of potassium oxide would be produced assuming you had unlimited oxygen.
Learn more about stoichiometry,here:
https://brainly.com/question/9743981
#SPJ9
Determine an unknown concentration or volume using an acid–base titration.
Calculate the volume of 2.63×10-2 M barium hydroxide required to neutralize 16.1 mL of a 0.110 M nitric acid solution.
? mL
The volume of 2.63×10-² M barium hydroxide required to neutralize 16.1 mL of a 0.110 M nitric acid solution is 67.34mL.
How to calculate volume?The volume of a substance can be calculated using the following expression:
CaVa = CbVb
Where;
Ca = concentration of acidCb = concentration of baseVa = volume of acidVb = volume of baseAccording to this question, 2.63×10-² M barium hydroxide is required to neutralize 16.1 mL of a 0.110 M nitric acid solution.
0.0263 × Va = 16.1 × 0.110
0.0263Va = 1.771
Va = 67.34mL
Learn more about volume at: https://brainly.com/question/28241684
#SPJ1
What are the differences between an endothermic and exothermic reaction?
Answer:
Exothermic-Producing heat
Endothermic-absorbing heat
Answer:
An endothermic reaction is a chemical reaction that absorbs heat energy, causing the temperature of the system to decrease. An exothermic reaction is a chemical reaction that releases heat energy, causing the temperature of the system to increase.
Explanation:
A hamburger is found to contain 10.1 grams of fat, 30.3 grams of carbohydrate and 13.3 grams of protein. Calculate the percent fat, carbohydrates and protein for this sandwich. (Do not have to use dimensional analysis)
The percent fat, carbohydrates and protein for this sandwich are 18%, 56.4% and 24.71% respectively.
What is mass percentage?The mass percent might be used to denote a degree. Furthermore, it defines the component during a certain mixing. The solution composition usually frequently defined in terms of mass percentage.
It represents the amount of solute contained in a constant amount of solution. The quantity of solutes can be stated in terms of mass or moles.
Mass percent of fat= (10.1/ 53.7)×100=18%
Mass percent of carbohydrate = (30.3/ 53.7)×100=56.4%
Mass percent of protein= (13.3 / 53.7)×100=24.71%
Therefore, the percent fat, carbohydrates and protein for this sandwich are 18%, 56.4% and 24.71% respectively.
To learn more about mass percentage, here:
https://brainly.com/question/28998211
#SPJ1
Only few substances can be used as natural indicators. Why?
Answer:
Only few substances can be used as natural indicators because, some natural indicators do not have chemical properties which can change the color of substances.
Explanation:
Natural indicators are obtained from natural sources such as plants. Some of the common examples of natural indicators include red cabbage, turnip skin, cherries, beetroots and more. The natural indicators will help individuals distinguish if it is a base or an acid.
While calculating the ending amounts of product after an
experiment, Jose found that he had made 0.35 moles of
iron. His goal was to make 40 grams of iron, did he reach
his goal?
Yes, Jose reached his goal.
What is the mole?In chemistry, the mole is a unit used to measure the amount of a substance. It is defined as the amount of a substance that contains the same number of entities (such as atoms, molecules, or ions) as there are atoms in 12 grams of pure carbon-12. This number is known as Avogadro's number and is approximately equal to 6.022 × 10^23.
The concept of the mole is fundamental to many areas of chemistry, including stoichiometry, the study of chemical reactions and their quantitative relationships. It allows chemists to make precise measurements and calculations, and to compare and relate the properties of different substances.
Number of moles in 40 g of iron = 40g/56 g/mol
= 0.7 moles
Learn more about moles:https://brainly.com/question/26416088
#SPJ1
What mass of HCl is contained in 45.0 mL of an aqueous HCl solution that has a density of 1.19g cm ^ - 3 and contains 37.21% HCl by mass?
Answer:
0.01999 g
Explanation:
To find the mass of HCl in 45.0 mL of the solution, we need to first find the volume of the solution and then convert that volume to mass.
First, we can convert 45.0 mL to liters by dividing by 1000:
45.0 mL ÷ 1000 = 0.045 L
Next, we can find the mass of the solution by multiplying the volume by the density:
0.045 L × 1.19 g/cm³ = 0.05365 g
Now that we have the mass of the solution, we can find the mass of HCl by multiplying the mass of the solution by the concentration of HCl expressed as a decimal:
0.05365 g × 0.3721 = 0.01999 g
So, there is approximately 0.01999 g of HCl in 45.0 mL of the solution.
(b) Levetiracetam is the (S) enantiomer of the memory-enhancing racemic drug called etiracetam. What do you think inspired the name of levetiracetam?
Since the configuration is such that we call it sinister (left). That inspired the name.
What is stereochemistry?The stereochemistry has to do with the study of the arrangement of the atoms and the groups that are in a compound. In this case, we can see that the compound that we have in the question has an (S) configuration and the meaning of this is that we can be able to arrange the priority groups from the left hand side as shown.
This can now explain to us that since the configuration is sinister then the name of the compound that is under study here can now be called Levetiracetam.
Learn more about stereochemistry:https://brainly.com/question/28658912
#SPJ1
Which is NOT a limiting factor when it comes to applying motivation to employees in the hospitality industry?
A limiting factor when it comes to applying motivation to employees in the hospitality industry is Payment structure.
What is the structure?The structure of a essay is straightforward and simple.It typically consists of an introduction, two to three body paragraphs and a conclusion. The introduction should introduce the main topic and provide a brief overview of what will be discussed. The body paragraphs should provide more specific details about the main topic and should include supporting evidence. The conclusion should summarize the essay and provide a final thought or opinion. It is important to keep in mind that the essay should be free of plagiarism, so it is essential to write all content in one’s own words.
To learn more about structure
https://brainly.com/question/20300458
#SPJ1
I truck travel down the highway speed of 110 km/hr how long does a trip last the truck cover 2,200 km?
Answer:
20 hours
Explanation:
The time it takes for the truck to travel 2,200 km at a speed of 110 km/hr is calculated by dividing the total distance by the speed:
Time = Distance / Speed
Time = 2,200 km / 110 km/hr
Time = 20 hours
So it takes the truck 20 hours to cover the 2,200 km trip at a speed of 110 km/hr.
Aɳʂɯҽɾҽԃ Ⴆყ ɠσԃKEY ꦿ
Which coefficients correctly balance the equation below
KOH+BaCI- -> KCI + Ba(OH)2
2,2,2,1
1,2,1,2
2,1,2,1
2,2,2,1
The coefficients that correctly balance the equation below would be 2,1,2,1. The third option.
Balancing chemical equationsA balanced chemical equation will have an equal number of different atoms in the reactants and in the products, irrespective of whether there is a change of form or otherwise.
Thus, the balanced equation of the reaction whose equation is shown would be: [tex]2KOH+BaCI_2- - > 2KCI + Ba(OH)_2[/tex]
In other words, the coefficients of the correctly balanced equation are 2,1,2,1.
More on balancing equations can be found here: https://brainly.com/question/7522382
#SPJ1
1.discuss breifly about types of quantum numbers"
Answer:
Explanation:
Quantum numbers are a set of numbers that describe the state of an electron in an atom. There are four types of quantum numbers:
Principal quantum number (n): This quantum number determines the energy level of an electron in an atom. The larger the value of n, the higher the energy level and the farther the electron is from the nucleus.
Azimuthal quantum number (l): This quantum number determines the shape of the electron orbital. The value of l can range from 0 to n-1, and it describes the angular momentum of the electron.
Magnetic quantum number (m): This quantum number determines the orientation of the electron orbital in space. The value of m can range from -l to +l, and it describes the orientation of the orbital.
Spin quantum number (s): This quantum number describes the intrinsic angular momentum, or spin, of an electron. The value of s is always ±1/2.
These four quantum numbers together describe the state of an electron in an atom, including its energy, shape, orientation, and spin. Understanding these quantum numbers is essential for understanding the behavior of electrons in atoms and for predicting the properties of chemical compounds.
Which group would most benefit from the claim?
O people who sell coffee with caffeine
• people who sell decaffeinated tea
• diners that serve only drinks without caffeine
O manufacturers of caffeine-free bottled fruit juice
The group that would most benefit from the claim is people who sell coffee with caffeine.
What was the claims assertion?Caffeine increases mental alertness, making it ideal for activities related to the workplace because it makes a person more attentive, aware of their surroundings, and better able to keep up with tasks.
Caffeine enhances motor coordination, which is the capacity to coordinate various body parts to produce complicated movements. Among those who are active, the capacity to enhance motor coordination may increase need for caffeine.
The organizations who would gain most from the claim are the dealers in caffeinated items, including; based on the link of caffeine with benefits that are desired by active people (working people who earn income).
Therefore, option A is correct.
Learn more about claim at:
https://brainly.com/question/2748145
#SPJ1
1 point
Count the number of atoms in the formula: 3Al2(SO4)3
Al atoms
There are
type your answer...
There are
type your answer...
There are type your answer...
Satoms
O atoms
The total number of atoms is type your answer...
Al atoms: 6, S atoms: 9, O atoms: 36, The total number of atoms is 51.
what is 3Al2(SO4)3 ?
3Al2(SO4)3 is a chemical formula that represents the compound aluminum sulfate. It is also sometimes written as Al2(SO4)3.
Aluminum sulfate is a white crystalline solid that is commonly used in water treatment, as a coagulating agent to remove impurities and suspended solids from water. It is also used in the paper industry, in the production of dyes and pigments, and as a food additive. Aluminum sulfate has a variety of other applications as well, such as in the production of aluminum and in the tanning of leather.
The formula 3Al2(SO4)3 indicates that the compound contains three molecules of aluminum sulfate, with a total of six aluminum atoms and nine sulfate ions. Each aluminum sulfate molecule consists of two aluminum atoms and three sulfate ions.
Al atoms: 6, S atoms: 9, O atoms: 36, The total number of atoms is 51.
To learn more about aluminum sulfate follow the given link: https://brainly.com/question/28299913
#SPJ1
if 12.0 grams of potassium chlorate decompose how many grams of potassium chloride will be produced?
If 12.0 grams of potassium chlorate decompose, 7.29 grams of potassium chloride will be produced.
What is molar mass ?The term molar mass of a substance is defined as the mass in grams of one mole of the compound. In a substance, the amount of entities present e.g., atoms, molecules, ions, is defined as a mole. A mole of any substance is 6.022×10²³ molecules.
First change 12.0 grams of potassium chlorate to moles.
calculate the gram molecular mass of potassium chlorate.
Chlorine has seven valance electrons when it is saturated six of these electrons are used by oxygen ( 2 electrons per oxygen) leaving only 1 electron.
1 K x 39 grams/mole
+1 Cl x 35.4 grams/ mole
+3 O x 16 grams/ mole
= 122.4 grams / mole Potassium Chlorate
= 12/122.4
= 0.09 moles.
0.09moles of Potassium Chlorate.
There is a 1:1 mole ratio. 1 mole of Potassium Chlorate will produce 1 mole of Potassium Chloride.
0.09 moles of Potassium Chlorate will produce 0.09moles of Potassium Chloride.
Find the gram molecular mass of Potassium Chloride.
1 K x 39 = 39
+1 Cl x 35.4 = 35.4
= 74.4 grams / mole.
0.09 moles x 74.4 grams/ mole
= 7.29 grams
Thus, if 12.0 grams of potassium chlorate decompose, 7.29 grams of potassium chloride will be produced.
To learn more about the molar mass, follow the link;
https://brainly.com/question/12127540
#SPJ1
Use the rate law to quantitatively explain what would happen in the following situations?
a. what would happen to the rate of the reaction if the iodide concentration was doubled?
b. what would happen to the rate of the reaction if the thiosulfate concentration was doubled?
c. what would happen to the rate of the reaction if the persulfate concentration was halved?
d. how would increasing the total volume of the solution affect the actual rate of the iodine clock reaction
A.By using the rate law it was discovered that doubling the concentration of Fe(III) doubled the reaction rate, and doubling the concentration of iodide quadrupled the reaction rate.
What is rate law ?A chemical reaction's rate law is the mathematical relationship between the rate of the reaction and the concentrations of the reactants. The rate law of a chemical reaction is determined by measuring the initial rate of the reaction at various reactant concentrations.
B.Simply changing the concentration of thiosulfate in solution allows us to see how the rate of reaction changes, If the thiosulfate ion concentration is doubled while the rate of reaction remains constant, the reaction is zeroth order in thiosulfate ion concentration.
C. Nothing happen to the rate of the reaction if the per sulfate concentration was halved.
D.The concentrations of all reactants are held constant. The total volume of the solution has no effect on the rate of the iodine clock reaction.
To learn more about the rate law, follow the link;
https://brainly.com/question/30379408
#SPJ9
A phosphate-ion (PO43-) level in a water sample is 93.1 ppm (or mg/L). What is the concentration of this phosphate sample in molarity? Density of water is 1 g/mL Note: In the field of water quality, ppm and mg/L are the same unit.
Answer:
The molarity of a solution can be calculated by dividing the number of moles of solute by the volume of the solution in liters. To calculate the number of moles of solute in a solution, we first need to find the mass of the solute.
Since the concentration of the phosphate sample is given in mg/L (ppm), we can convert this to grams by multiplying by 0.001:
93.1 mg/L x 0.001 g/mg = 0.0931 g/L
Next, we can find the number of moles of solute by dividing the mass of solute by its molar mass:
0.0931 g ÷ (1 mol/94 g) = 0.000989 mol/L
Finally, we can find the molarity of the solution by dividing the number of moles of solute by the volume of the solution:
0.000989 mol ÷ (1 L) = 0.000989 M
Element A + compound B —> element C + compound D
————————————-
What is the reaction type?
Single replacement
Decomposition
Combustion
Synthesis
Double Replacement
Answer:
Single replacement
Explanation:
Answer:
single replacement reaction
Explanation:
This type of reaction, one element is swapped with another element in a compound, leading to the formation of two new compounds. The element A replaces one of the elements in compound B to form element C and compound D.
In a single replacement reaction, the reactants are typically elements in their elemental form and a compound. The element that is replaced is typically one that is more reactive, meaning it has a greater tendency to react and form a new compound. The new compound that is formed is typically more stable, meaning it has a lower tendency to react and form another new compound.
ALLEN
Given the following list from the activity se- ries of metals (from most active to least ac- tive) K, Na, Al, Mn, Cr, Cd, Co, Pb, Hg which reaction would you NOT expect to occur?
1. Na(s) + Mn2+(aq) → Na+(aq) + Mn(s)
2. Co2+(aq) + Al(s) → Al3+(aq) + Co(s)
3. Cd(s) + Pb2+(aq) → Pb(s) + Cd2+(aq)
4. Al3+(aq) + Cr(s) → Cr3+(aq) + Al(s)
5. All of the listed reactions will occur.
Answer:
Explanation:
According to the activity series of metals, the reaction that would not be expected to occur is:
Al3+(aq) + Cr(s) → Cr3+(aq) + Al(s)
This is because aluminum (Al) is higher on the activity series and is less likely to be oxidized (lose electrons), while chromium (Cr) is lower on the activity series and is more likely to be oxidized. In this reaction, aluminum would have to be oxidized, which is not consistent with its position on the activity series.
All of the other reactions listed are expected to occur because they involve the transfer of electrons from a metal that is lower on the activity series to a metal that is higher on the series.
A chemist working as a safety inspector finds an unmarked bottle in a lab cabinet. A note on the door of the cabinet says the cabinet is used to store bottles of dimethyl sulfoxide, acetone, diethytamin, tetrahydrofuran, and carbon tetrachloride. The chemist plans to identify the unknown liquid by measuring the density and comparing to known densities. First, from her collection of Material Safety Data Sheets (MSOS), the chemist finds the following information: Next, the chemist measures the volume of the unknown liquid as 0.767 L and the mass of the unknown liquid as 682. g. Calculate the density of the liquid. Round your answer to 3 significant digits. g. cm^-3 Given the data above, is it possible to identify the liquid? yes no If it is possible to identify the liquid, do so. dimethyl sulfoxide acetone diethylamine tetrahydrofuran carbon tetrachloride times 10
Yes, it is possible to identify the liquid, and the density of the liquid is closest to 0.889 g/cm³ so the liquid is most likely tetrahydrofuran.
To calculate the density of the unknown liquid, we use the formula:
Density = Mass / Volume
Substituting the given values, we get:
Density = 682. g / 0.767 L
Density = 888.5 g/L
Rounding to three significant digits, the density of the unknown liquid is 889 g/L.
Using the information provided in the question, we can compare the density of the unknown liquid to the known densities of the listed chemicals. The densities (in g/cm³) of the chemicals are:
Dimethyl sulfoxide: 1.092
Acetone: 0.790
Diethylamine: 0.707
Tetrahydrofuran: 0.889
Carbon tetrachloride: 1.594
Comparing the density of the unknown liquid to the known densities, we see that it is closest to the density of tetrahydrofuran, which is 0.889 g/cm³. Therefore, it is likely that the unknown liquid is tetrahydrofuran.
Learn more about density here:
https://brainly.com/question/29775886
#SPJ4
A reaction vessel is charged with 0.50 atm of A and 0.130 atm of B. Once the reaction reaches equilibrium, what is the equilibrium partial pressure of B? Kp for this reaction is 67.2
A (g) ⇌ 2 B (g)
If a reaction vessel is charged with 0.50 atm of A and 0.130 atm of B. Once the reaction reaches equilibrium, the equilibrium partial pressure of B is: 5.79 atm.
What is the equilibrium partial pressure of B?To calculate the equilibrium partial pressure of B, we need to use the expression for an equilibrium constant (Kp). The equation for Kp for a reaction of the form A (g) ⇌ 2 B (g) is given by:
Kp = (P_B^2) / (P_A)
Where:
P_A and P_B are the equilibrium partial pressures of A and B, respectively.
Given that the initial pressures of A and B are 0.50 atm and 0.130 atm, respectively, and the value of Kp is 67.2, we can use the above equation to calculate the equilibrium partial pressure of B:
Kp = (P_B^2) / (P_A) = 67.2
P_A = 0.50 atm
Therefore,
(P_B^2) / (0.50 atm) = 67.2
P_B^2 = 67.2 * 0.50 atm = 33.6 atm
P_B = √(33.6 atm) = 5.79 atm
So, the equilibrium partial pressure of B is approximately 5.79 atm.
Learn more about equilibrium partial pressure of B here:https://brainly.com/question/14001401
#SPJ1
An ___________________ that is useful for living in one type of ______________ may be useless in a different environment.
Organisms must live in a place that has the conditions they need to _____________
Organisms generally have adaptations that allow them to survive in one particular ______________.
An adaptation that is useful for living in one type of environment may be useless in a different environment. Organisms must live in a place that has the conditions they need to survive. Organisms generally have adaptations that allow them to survive in one particular enviroment.
What do adaptations in a particular enviroment mean?The expression adaptations in a particular enviroment mean that these traits are only advantageous regarding the enviroment.
Therefore, with this data, we can see that the adaptations in a particular enviroment can be detrimental or beneficial depending on the enviroment.
Learn more about adaptative features here:
https://brainly.com/question/29594
#SPJ1
