Answer:
a) W_total = mg (2h + d) , b) E_total = - mg (h + d)
Explanation:
a) We must solve this problem in two parts, the first for the accelerated movement and the second for the movement with constant speed
Let's look for work for the part that is in free fall
y = y₀ + v₀ t - ½ g t²
when he jumps out of a plane his vertical speed is zero
y =y₀ - ½ g t²
dy = 0 - ½ g 2t dt
the work in this first part is
W₁ = ∫ F dy
W₁ = mg ∫ g t dt
W₁ = m g² t² / 2
the time it takes to travel the distance y₀-y = h is
y₀-y = ½ g t²
t =[tex]\sqrt{2h/g}[/tex]
we substitute
W₁ = m g² 2h / g
W₁ = m g 2h
now we look for the work for the part with constant speed
since the velocity is constant let's use the uniform motion ratio
W₂ = F d
W₂ = mg d
the total work is
W_total = W₁ + W₂
W_total = 2mgh + m gd
W_total = mg (2h + d)
b) The change in gravitational potential energy
U = mg Δy
in the part with accelerated movement
U₁ = mg h
in the part with uniform movement
U₂ = mg d
the total potential energy is
E_total = U₁ + U₂
E_total = - mg (h + d)
A rigid tank contains 10 lbm of air at 30 psia and 60 F. Find the volume of the tank in ft3. The tank is now heated until the pressure doubles. Find the heat transfer in Btu.
Answer:
Hence the amount of heat transfer is 918.75 Btu.
Explanation:
Now,
Explain the following defects of a simple electric cell:
a.Polarization,
ß. Local action.
Answer:
Explanation:
The two major defects of simple electric cells causes current supplied to be for short time. These defects are: polarization and local action.
a. Polarization: This is a defect caused by an accumulation of hydrogen bubbles at the positive electrode of the cell. It can be prevented by the use of vent, using a hydrogen absorbing material or the use of a depolarizer.
b. Local Action: This is the gradual wearing away of the electrode due to impurities in the zinc plate. It can be controlled by the amalgamation of the zinc plate before it is used.
A ball is launched from the ground with a horizontal speed of 30 m/s and a vertical speed of 30 m/s. How long will it take to get to the top of its trajectory? A. 3 seconds B. 4 seconds C. 2 seconds D. 6 seconds
Answer:
A (3 seconds)
Explanation:
Well here we have a type of motion called projectile motion and it is pretty similar to an upside down parabola. The top of the trajectory is the vertex of the parabola and is also when v=0.
Lets identify our givens.
Givens:
Horizontal speed= 30m/s
Vertical Speed= 30 m/s
Since the ball is in freefall after being launched ay=-g(take up to be positive) and ax=0
The ball is launched from the ground so y0=0
Final vertical velocity= 0
This problem is now relatively easy because we only need to find the vertical distance so we can ignore horizontal speed and use
vy=vy0+ayt
Plug in our givens
0=30-10t
solve for t
t=3 seconds
An electron moving in the y direction, at right angles to a magnetic field, experiences a magnetic force in the -x direction. The direction of the magnetic field is in the
Answer:
The direction of magnetic field is along + Z axis.
Explanation:
The direction of motion of electron is along y axis.
The magnetic force is along - X axis.
The force on the charged particle moving in the magnetic field is
[tex]\overrightarrow{F} = q (\overrightarrow{v}\times \overrightarrow{B})\\\\- F \widehat{i} = - q (v \widehat{j}\times \overrightarrow{B})\\[/tex]
So, the direction of the magnetic field is along + Z axis.
This diagram shows the magnetic field lines near the ends of two magnets. There is an error in the diagram.
Two bar magnet with the north pole of one near the south pole of the second. field lines are leaving the north pole and bent away from the south pole of the other. Field lines are leaving the south pole of one and bending away from the north pole of the other.
Which change will correct the error in the diagram?
a)changing the N to S
b)reversing the arrows on the left to point toward the N
c)changing the S to N
d)reversing the arrows on the right to point toward the S
Answer:
changing the N to S. that's how the error will be corrected
Answer:
C is the correct answer
Explanation:
i took the test
If an object, initially at rest, accelerates at the rate of 25m/s2, what will the magnitude of the displacement be after 50s
Answer:
31250 meters
Explanation:
Given data
Intitially at rest, the velocity will be
u= 0m/s
acceleration a= 25m/s^2
Time= 50s
We know that the expression for the displacement is given as
S=U+ 1/2at^2
S= 0+ 1/2*25*50^2
S= 12.5*2500
S=31250 meters
Hence the displacement is 31250 meters
The cart travels the track again and now experiences a constant tangential acceleration from point A to point C. The speeds of the cart are 10.6 ft/s at point A and 15.6 ft/s at point C. The cart takes 4.00 s to go from point A to point C, and the cart takes 1.80 s to go from point B to point C. What is the cart's speed at point B
Answer:
a) [tex]a_{avg}=1.25ft/s^2[/tex]
b) [tex]v_b=13.35ft/s[/tex]
Explanation:
From the question we are told that:
Speed at point A [tex]v_A=10.6ft/s[/tex]
Speed at point C [tex]v_C=15.6ft/s[/tex]
Time from Point A to C [tex]T_{ac}=4.00s[/tex]
Time from Point B to C [tex]T_{bc}=1.80s[/tex]
Generally the equation for acceleration From A to B is mathematically given by
[tex]a_{avg}=\frac{v_c-v_a}{\triangle t}[/tex]
[tex]a_{avg}=\frac{15.6-10.6}{4.0 }[/tex]
[tex]a_{avg}=1.25ft/s^2[/tex]
Generally the equation for cart speed at B is mathematically given by
[tex]a_{avg}=\frac{v_c-v_a}{T_{bc}}[/tex]
[tex]v_b=v_c-a_{avg}*T_{bc}[/tex]
[tex]v_b=15.6ft/s-(1.25ft/s^2)(1.80)[/tex]
[tex]v_b=13.35ft/s[/tex]
Hi can someon help me how to answer this?
Btw I'm from Philippines
Answer:
Test 1
1.True
2.True
3.True
4.False
5.True
6.True
7.False
8.True
9.True
10.True
yung iba nasa pic
Which is a mixture?
'a' sodium metal
'b' chlorine gas
'c' sodium metal and chlorine gas
'd' sodium chloride (salt) and water
Answer:
d. Sodium chloride (salt) + water
Explanation:
A mixture is made up of two or more substance combined together (combined chemically).NaCl (salt) can completely dissolve in water and sodium chlorine (aqueous) is a homogeneous mixture.sodium metal when extracted is a soft, silvery white solid.chlorine gas is a pure gas.sodium metal and chlorine gas are at pure state hence they are not mixture.learn more: https://brainly.com/question/2331419
Answer:D. Sodium chloride (salt) and water
Explanation:
I got it right on edge 2023
hope this is helpful!
The conductivity of intrinsic semiconductors, such as silicon and germanium, can be increased when small amounts of group 3A or group 5A elements are added by a process called doping.
a. True
b. False
Answer:
a. True
Explanation:
A semiconductor can be defined as a crystalline solid substance that has its conductivity lying between that of a metal and an insulator, due to the effects of temperature or an addition of an impurity. Semiconductors are classified into two main categories;
1. Extrinsic semiconductor.
2. Intrinsic semiconductor.
An intrinsic semiconductor is a crystalline solid substance that is in its purest form and having no impurities added to it. Examples of intrinsic semiconductor are Germanium and Silicon.
Basically, the number of free electrons in an intrinsic semiconductor is equal to the number of holes. Also, the number of holes and free electrons in an intrinsic semiconductor is directly proportional to the temperature; as the temperature increases, the number of holes and free electrons increases and vice-versa.
In an intrinsic semiconductor, each free electrons (valence electrons) produces a covalent bond.
Generally, a process referred to as doping can be used to increase the conductivity of an intrinsic semiconductor such as silicon or germanium, by adding small amounts of impurities found in group 3A or group 5A elements.
What is the strength of the magnetic field a distance 4.4 mm above the center of a circular loop of radius 0.8 mm and current 474.1 A
Answer:
B = 0.118 T
Explanation:
From Biot-Savart Law:
[tex]B = \frac{\mu_o I}{2\pi r}[/tex]
where,
B = strength of magnetic field = ?
μ₀ = 4π x 10⁻⁷ Tm/A
I = current enclosed = 474.1 A
r = radius = 0.8 mm = 8 x 10⁻⁴ m
Therefore,
[tex]B = \frac{(4\pi\ x\ 10^{-7}\ Tm/A)(474.1\ A)}{2\pi(8\ x\ 10^{-4}\ m)}[/tex]
B = 0.118 T
A body of mass 450g changes it speed from 5ms¹ to 25ms¹. what is the work done by the body?
Answer:
135J
Explanation:
So we know ΔKinetic Energy= ΔWork
Kinetic energy=1/2mv²
So Kf-Ki=ΔK
ΔK=1/2*0.45(25²-5²)=135J
135J=ΔWork
A generator is designed to produce a maximum emf of 190 V while rotating with an angular speed of 3800 rpm. Each coil of the generator has an area of 0.016 m2. If the magnetic field used in the generator has a magnitude of 0.052 T, how many turns of wire are needed
Answer:
The number of turns of wire needed is 573.8 turns
Explanation:
Given;
maximum emf of the generator, = 190 V
angular speed of the generator, ω = 3800 rev/min =
area of the coil, A = 0.016 m²
magnetic field, B = 0.052 T
The number of turns of the generator is calculated as;
emf = NABω
where;
N is the number of turns
[tex]\omega = 3800 \frac{rev}{min} \times \frac{2\pi}{1 \ rev} \times \frac{1 \min}{60 \ s } = 397.99 \ rad/s[/tex]
[tex]N = \frac{emf}{AB\omega } \\\\N = \frac{190}{0.016 \times 0.052\times 397.99} \\\\N = 573.8 \ turns[/tex]
Therefore, the number of turns of wire needed is 573.8 turns
If an object travels on a circular path is an acceleration? What is changing to cause an acceleration?
A 1640 kg merry-go-round with a radius of 7.50 m accelerates from rest to a rate of 1.00 revolution per 8.00 s. Estimate the merry-go-round as a solid cylinder and determine the net work needed for this acceleration.
Solution :
Given data :
Mass of the merry-go-round, m= 1640 kg
Radius of the merry-go-round, r = 7.50 m
Angular speed, [tex]$\omega = \frac{1}{8}$[/tex] rev/sec
[tex]$=\frac{2 \pi \times 7.5}{8}$[/tex] rad/sec
= 5.89 rad/sec
Therefore, force required,
[tex]$F=m.\omega^2.r$[/tex]
[tex]$$=1640 \times (5.89)^2 \times 7.5[/tex]
= 427126.9 N
Thus, the net work done for the acceleration is given by :
W = F x r
= 427126.9 x 7.5
= 3,203,451.75 J
A car is moving with a velocity of45m/s. Is brought to rest in 5s.the distance travelled by car before it comes to rest is
Answer:
The car travels the distance of 225m before coming to rest.
Explanation:
v = 45m/s
t = 5s
Therefore,
d = v*t
= 45*5
= 225m
Receptor elétrico 5 pontos Dispositivo que converte energia elétrica em outra forma de energia, não exclusivamente térmica. Exemplos: motores elétricos, ventiladores, liquidificadores, geladeiras, aparelhos de sons, vídeos, celulares, computadores?
Answer:
Electromechanical transducer and Electrical receiver.
Explanation:
Electromechanical transducer is the part of a communication system which converted electrical waves or electrical energy into sound waves. The most common example loudspeaker while on the other hand, Electrical receiver is a device that converts electrical energy into another form of energy, except thermal. Examples are cell phones, computers and television.
Two guitar strings, of equal length and linear density, are tuned such that the second harmonic of the first string has the same frequency as the third harmonic of the second string. The tension of the first string is 510 N. Calculate the tension of the second string.
Answer:
The tension in the second string is 226.7 N.
Explanation:
Length is L, mass per unit length = m
T = 510 N
Let the tension in the second string is T'.
second harmonic of the first string = third harmonic of the second string
[tex]2 f = 3 f'\\\\2\sqrt{\frac{T}{m}} = 3 \sqrt {\frac{T'}{m}}\\\\4 T = 9 T'\\\\4\times 510 = 9 T'\\\\T' = 226.7 N[/tex]
If you and a friend are standing side-by-side watching a soccer game, would you both view the motion from the same reference frame?
a. Yes, we would both view the motion from the same reference point because both of us are at rest in Earth’s frame of reference.
b. Yes, we would both view the motion from the same reference point because both of us are observing the motion from two points on the same straight line.
c. No, we would both view the motion from different reference points because motion is viewed from two different points; the reference frames are similar but not the same.
d. No, we would both view the motion from different reference points because response times may be different; so, the motion observed by both of us would be different.
Answer:
the correct is C
Explanation:
The concept of a frame of reference is of crucial importance in physics, because it is the system from which measurements are made. Therefore, the relationships between the different reference frames must be clear so that the measurements made can be compared correctly.
In this case, the first observed sees the movement of the ball, suppose it moves a distance r, the second observed is next to me, separated by a distance x, therefore a frame of reference located in the movement of the ball. ball r '.
Consequently, the measurement carried out is related by
r = r’ + x
where the bold letters indicate wind blowers.
With these explanations we review the different answers, the correct one is C
g A student slides her 80.0-kg desk across the level floor of her dormitory room a distance 3.00 m at constant speed. If the coefficient of kinetic friction between the desk and the floor is 0.400, how much work did she do
The desk is in equilbrium, so Newton's second law gives
∑ F (horizontal) = p - f = 0
∑ F (vertical) = n - mg = 0
==> n = mg
==> p = f = µn = µmg = 0.400 (80.0 kg) g = 313.6 N
The student pushes the desk 3.00 m, so she performs
W = (313.6 N) (3.00 m) = 940.8 Nm ≈ 941 J
of work.
1.a machine gun fires a ball with an initial velocity of 600m/s with an elevation of 30° with respect to the ground neglecting air resistance calculate:
a.the maximum height that can be reached?
b.the time of flight of the bullet?
c.the maximum horizontal displacement of the ired bullet?
Answer:
See explanation
Explanation:
a) maximum height of a projectile = u sin^2θ/2g
H= 600 × (sin 30)^2/2 × 10
H= 7.5 m
b) Time of flight
t= 2u sinθ/g
t= 2 × 600 sin 30/10
t= 60 seconds
Range
R= u^2sin2θ/g
R= (600)^2 × sin2(30)/10
R= 31.2 m
When an apple falls towards the earth,the earth moves up to meet the apple. Is this true?If yes, why is the earth's motion not noticeable?
Answer:
Yes, when an apple falls towards the earth, the apple gets accelerated and comes down due to the gravitational force of attraction used by the earth. The apple also exerts an equal and opposite force on the earth but the earth does not move because the mass of the apple is very small, due to which the gravitational force produces a large acceleration in it (a = F/m) but the mass of the earth is very large, the same gravitational force produces very small acceleration in the earth and we don't see the earth rising towards the apple.
Topic: Chapter 10: Projectory or trajectile?
Projectile range analysis:
A projectile is launched from the ground at 10 m/s, at
an angle of 15° above the horizontal and lands 5.1 m away.
What other angle could the projectile be launched at, with the same velocity,
and land 5.1 m away?
90°
75°
45
50°
30°
Answer:
The other angle is 75⁰
Explanation:
Given;
velocity of the projectile, v = 10 m/s
range of the projectile, R = 5.1 m
angle of projection, 15⁰
The range of a projectile is given as;
[tex]R = \frac{u^2sin(2\theta)}{g}[/tex]
To find another angle of projection to give the same range;
[tex]5.1 = \frac{10^2 sin(2\theta)}{9.81} \\\\100sin(2\theta) = 50\\\\sin(2\theta) = 0.5\\\\2\theta = sin^{-1}(0.5)\\\\2\theta = 30^0\\\\\theta = 15^0\\\\since \ the \ angle \ occurs \ in \ \ the \ first \ quadrant,\ the \ equivalent \ angle \\ is \ calculated \ as;\\\\90- \theta = 15^0\\\\\theta = 90 - 15^0\\\\\theta = 75^0[/tex]
Check:
sin(2θ) = sin(2 x 75) = sin(150) = 0.5
sin(2θ) = sin(2 x 15) = sin(30) = 0.5
The thrust F of a screw propeller is known to depend upon the diameter d, Speed of advance v, fluid density e, revolution per second N, and the coefficient of viscosity M, of the fluid. Find the expression for F, in terms of the quantities
Answer:
[tex]{ \bf{F = { \tt{ \frac{4}{3} \pi {r}^{3}v gM}}}}[/tex]
How are Newton’s 1 and 2 law related?
prove mathematically :
1. v = u + at
2. s = ut+1*2 at
Answer:
a.v=u+v/2
a.v=s/t
combining two equation we get,
u+v/2=s/t
(u+v)t/2=s
(u+v)t/2=s
{u+(u+at)}t/2=s
(u+u+at)t/2=s
(2u+at)t/2=s
2ut+at^2/2=s
2ut/2+at^2/2=s
UT +1/2at^2=s
proved
a=v-u/t
at=v-u
u+at=v
what will be the gravitational force between two heavenly bodies if the masses of both are tripled keeping the distance between them constant
Answer:
If the mass of one of the objects is tripled, then the force of gravity between them is tripled. ... Since gravitational force is inversely proportional to the square of the separation distance between the two interacting objects, more separation distance will result in weaker gravitational forces
A solid uniform disk of diameter 3.20 m and mass 42 kg rolls without slipping to the bottom of a hill, starting from rest. If the angular speed of the disk is 4.27 rad/s at the bottom, how high did it start on the hill?
A) 3.57 m.
B) 4.28 m.
C) 3.14 m.
D) 2.68 m.
Answer:
A(3.56m)
Explanation:
We have a conservation of energy problem here as well. Potential energy is being converted into linear kinetic energy and rotational kinetic energy.
We are given ω= 4.27rad/s, so v = ωr, which is 6.832 m/s. Place your coordinate system at top of the hill so E initial is 0.
Ef= Ug+Klin+Krot= -mgh+1/2mv^2+1/2Iω^2
Since it is a solid uniform disk I= 1/2MR^2, so Krot will be 1/4Mv^2(r^2ω^2= v^2).
Ef= -mgh+3/4mv^2
Since Ef=Ei=0
Mgh=3/4mv^2
gh=3/4v^2
h=0.75v^2/g
plug in givens to get h= 3.57m
Calculate the change in length of a 90.5 mm aluminum bar that has increased in temperature by from -14.4 oC to 154.6 oC
Take the coefficient of expansion to be 25 x 10-6 (oC)-1 . Write the answer in meters with three significant figures
Answer:
ΔL = 3.82 10⁻⁴ m
Explanation:
This is a thermal expansion exercise
ΔL = α L₀ ΔT
ΔT = T_f - T₀
where ΔL is the change in length and ΔT is the change in temperature
Let's reduce the length to SI units
L₀ = 90.5 mm (1m / 1000 mm) = 0.0905 m
let's calculate
ΔL = 25.10⁻⁶ 0.0905 (154.6 - (14.4))
ΔL = 3.8236 10⁻⁴ m
using the criterion of three significant figures
ΔL = 3.82 10⁻⁴ m
15.1.2 Exam: Semester Exam
ŽA
This graph shows the energy of a reaction over time. Which statement is
true?
Potential energy
N
Reaction progress
O A. G represents the activation energy
OB. H represents the energy of the products,
O C. G represents the energy of the products.
< PREVIOUS
Answer: D. F represents the activation energy
Explanation:
The activation energy is the energy required to get the reactants to begin reacting with one another such that products are created. This energy ranges from the minimum to the maximum energy required.
F is therefore the activation energy because it shows the range between the minimum energy it took for the reaction to start and the maximum energy that was required to continue the reaction.
