A pinball bounced around its machine before resting between two bumpers. Before the ball came to rest, its displacement was recorded as a series of vectors. All the angles are measured counterclockwise from the horizontal x-axis. V₁: 83.0 cm at 90.0 V₂:57.0 cm at 149¹ V₁: 61.0 cm at 223¹ Find the magnitude and direction of the ball's total displacement. magnitude: cm direction:

Answers

Answer 1

The magnitude of the ball's total displacement is approximately 94.7 cm. The direction of the displacement is approximately 195° counterclockwise from the horizontal x-axis.

To find the magnitude and direction of the ball's total displacement, we need to sum up the individual displacement vectors.

Given displacement vectors:

V₁: 83.0 cm at 90.0°

V₂: 57.0 cm at 149°

V₃: 61.0 cm at 223°

To find the total displacement, we can break down the vectors into their x and y components and then add them up.

For V₁:

V₁x = 83.0 cm * cos(90.0°) = 0 cm

V₁y = 83.0 cm * sin(90.0°) = 83.0 cm

For V₂:

V₂x = 57.0 cm * cos(149°)

V₂y = 57.0 cm * sin(149°)

For V₃:

V₃x = 61.0 cm * cos(223°)

V₃y = 61.0 cm * sin(223°)

Now we can calculate the sum of the x and y components:

Total displacement in the x-direction:

ΣVx = V₁x + V₂x + V₃x

Total displacement in the y-direction:

ΣVy = V₁y + V₂y + V₃y

To find the magnitude and direction of the total displacement, we can use the Pythagorean theorem and trigonometry:

Magnitude of displacement:

|ΣV| = sqrt((ΣVx)² + (ΣVy)²)

Direction of displacement:

θ = atan(ΣVy / ΣVx)

By substituting the given values and performing the calculations, we get:

V₁x = 0 cm

V₁y = 83.0 cm

V₂x ≈ -31.9 cm

V₂y ≈ 47.0 cm

V₃x ≈ -34.1 cm

V₃y ≈ -39.9 cm

ΣVx = V₁x + V₂x + V₃x

ΣVy = V₁y + V₂y + V₃y

|ΣV| = sqrt((ΣVx)² + (ΣVy)²)

θ ≈ atan(ΣVy / ΣVx)

By substituting the values and performing the calculations, we find:

ΣVx ≈ -65.9 cm

ΣVy ≈ 90.1 cm

|ΣV| ≈ 94.7 cm

θ ≈ 195°

Therefore, the magnitude of the ball's total displacement is approximately 94.7 cm, and the direction of the displacement is approximately 195° counterclockwise from the horizontal x-axis.

The ball's total displacement is approximately 94.7 cm in magnitude, and its direction is approximately 195° counterclockwise from the horizontal x-axis.

To know more about displacement, visit:

https://brainly.com/question/14422259

#SPJ11


Related Questions

determine whether the vector field f(x,y) = (yex sin(y),ex xcos(y)) is conservative and, if it is, find a potential.

Answers

The vector field F(x, y) = (yex sin(y), ex xcos(y)) is not conservative,we calculate that after checking  its components satisfy the condition of conservative vector fields.

conservative vector fields:
∂F/∂y = ∂(yex sin(y))/∂y = ex sin(y) + yex cos(y)
∂F/∂x = ∂(ex xcos(y))/∂x = ex cos(y)
Now, we need to check if ∂F/∂y = ∂F/∂x:
ex sin(y) + yex cos(y) = ex cos(y)
Since the two components of the vector field do not match, we conclude that the vector field F(x, y) is not conservative.
Therefore, there is no potential function associated with this vector field.

To know more about ,conservative vector fields, click here https://brainly.com/question/24332269

#SPJ11

A disk of radius 0.46 m and moment of inertia 2.1 kg·m2 is mounted on a nearly frictionless axle. A string is wrapped tightly around the disk, and you pull on the string with a constant force of 34 N. What is the magnitude of the torque? After a short time the disk has reached an angular speed of 6 radians/s, rotating clockwise. What is the angular speed 0.85 seconds later? angular speed = ???? radians/s

Answers

The magnitude of the torque exerted on the disk when a constant force of 34 N is applied to the string wrapped around it is 15.64 N·m.

What is the magnitude of the torque exerted on the disk when a constant force of 34 N is applied to the string wrapped around it?

The magnitude of the torque can be calculated using the formula: torque = force  ˣ radius. Plugging in the given values, the torque is 34 N  ˣ  0.46 m = 15.64 N·m.

What is the angular speed of the disk 0.85 seconds after reaching an initial angular speed of 6 radians/s?

The change in angular speed can be determined using the formula: change in angular speed = torque / moment of inertia ˣ time. Plugging in the values, the change in angular speed is (15.64 N·m) / (2.1 kg·m²)  ˣ (0.85 s) = 0.118 rad/s.

To find the final angular speed, we add the change in angular speed to the initial angular speed: 6 rad/s + 0.118 rad/s = 6.118 rad/s.

Therefore, the angular speed of the disk 0.85 seconds later is 6.118 radians/s.

Learn more about magnitude

brainly.com/question/31022175

#SPJ11

the work function of a certain metal is ϕϕ = 3.65 ev. determine the minimum frequency of light f0 for which photoelectrons are emitted from the metal. (planck's constant is: h = 4.1357×10-15 evs.)

Answers

The work function of a certain metal is ϕ = 3.65 eV. Planck's constant is h = 4.1357 × 10⁻¹⁵ eVs and we have to determine the minimum frequency of light f₀ for which photoelectrons are emitted from the metal.

What is work function?Work function is a measure of the energy required to remove an electron from a metal surface.What is photoelectric effect?Photoelectric effect is the process by which electrons are emitted from a metal surface when light falls on it.What is Planck's constant?Planck's constant is a physical constant that relates the energy of a photon to its frequency. The value of Planck's constant is

h = 6.626 × 10⁻³⁴ J s.

The minimum frequency of light required to remove an electron from the surface of a metal is given by the equation:

f₀ = (ϕ / h)

Where, f₀ is the minimum frequency of light, ϕ is the work function of the metal and h is Planck's constant.

f₀ = (3.65 / 4.1357 × 10⁻¹⁵)

= 8.82 × 10¹⁴ Hz

Therefore, the minimum frequency of light required to remove an electron from the surface of the metal is 8.82 × 10¹⁴ Hz.

For more information on Planck's constant visit:

brainly.com/question/30763530

#SPJ11

6. A jet plane is cruising at 340 m/s when suddenly the pilot turns the engines up to full throttle. After traveling 3.4 km, the jet is moving with a speed of 400 m/s. What is the jet's acceleration,

Answers

The jet's acceleration is 6 m/s². This means that its velocity increases by 6 meters per second every second when the engines are at full throttle.

To find the jet's acceleration, we can use the equation:

acceleration = (final velocity - initial velocity) / time

First, let's convert the initial and final velocities to meters per second (m/s):

Initial velocity = 340 m/s

Final velocity = 400 m/s

Next, we need to calculate the time it took for the jet to increase its velocity from 340 m/s to 400 m/s. We can use the formula:

distance = velocity × time

Given that the jet traveled 3.4 km (or 3400 m) during this time, we can rearrange the formula to solve for time:

time = distance / velocity

time = 3400 m / 340 m/s

time = 10 seconds

Now we have all the values we need to calculate the acceleration:

acceleration = (final velocity - initial velocity) / time

acceleration = (400 m/s - 340 m/s) / 10 s

acceleration = 60 m/s / 10 s

acceleration = 6 m/s²

The jet's acceleration is 6 m/s². This means that its velocity increases by 6 meters per second every second when the engines are at full throttle.

To know more about Acceleration, visit

brainly.com/question/460763

#SPJ11

what is the focal length of 2.0 d reading glasses found on the rack in a pharmacy

Answers

The focal length of 2.0 d reading glasses found on the rack in a pharmacy is 0.5 meters. Reading glasses are convex lenses that magnify objects up close, allowing those with presbyopia to read and perform close-up tasks.


The focal length of 2.0 d reading glasses found on the rack in a pharmacy is 0.5 meters. Focal length refers to the distance between the center of a lens and its focus.

Reading glasses are convex lenses that magnify objects up close, allowing those with presbyopia to read and perform close-up tasks. A lens that is 2.0 diopters has a power of +2.0. The formula for calculating the focal length of a lens is f = 1/d where f is the focal length and d is the power of the lens in diopters. Therefore, the focal length of 2.0 d reading glasses is f = 1/2 = 0.5 meters.


The focal length of 2.0 d reading glasses found on the rack in a pharmacy is 0.5 meters. Reading glasses are convex lenses that magnify objects up close, allowing those with presbyopia to read and perform close-up tasks.

To know more about focal length visit:

brainly.com/question/31755962

#SPJ11

the magnetic field inside a 5.0-cm-diameter solenoid is 2.0 t and decreasing at 3.10 t/s.

Answers

solution shows that the magnetic flux through the solenoid is 3.926×10⁻³ Wb initially. As the magnetic field is decreasing at a rate of 3.10 T/s, the magnetic flux will decrease accordingly.

The induced emf is given by ɛ = -A(dB/dt) = -(1.963×10⁻³ m²)(-3.10 T/s)

= 6.08×10⁻⁶ V.

The question gives the magnetic field inside a solenoid with a diameter of 5.0 cm. The magnetic field is 2.0 T and decreasing at a rate of 3.10 T/s.A solenoid is a long wire wound into a coil. It is capable of creating a magnetic field inside it when a current is passed through it. The magnetic field strength is proportional to the number of turns in the solenoid per unit length, current flowing through it and the magnetic permeability of the medium.

The magnetic flux through the solenoid is given by φ = BA, where B is the magnetic field, and A is the cross-sectional area of the solenoid. The area of a circular cross-section is A = πr².

Therefore, A = π(5.0 cm/2)²

= 19.63 cm²

= 1.963×10⁻³ m²The initial magnetic flux through the solenoid is φ = (2.0 T)(1.963×10⁻³ m²) = 3.926×10⁻³ Wb

After time t, the magnetic flux through the solenoid will be

φ = (2.0 T - 3.10 T/s×t)(1.963×10⁻³ m²)The rate of change of magnetic flux is given by Faraday's law of electromagnetic induction as: ɛ = -dφ/dt

The negative sign indicates that the induced emf opposes the change in magnetic flux. The induced emf is given by ɛ = -A(dB/dt)Where A is the area of the solenoid, and dB/dt is the rate of change of the magnetic field inside the solenoid.

solution shows that the magnetic flux through the solenoid is 3.926×10⁻³ Wb initially. As the magnetic field is decreasing at a rate of 3.10 T/s, the magnetic flux will decrease accordingly.

To know more about magnetic flux visit:

brainly.com/question/1596988

#SPJ11

4. Vo=50 m/s 10=53° des****** A projectile is fired at an angle 53° above the horizontal with 50 m/s initial velocity. a) Find its maximum height b) Find position and velocity 6 s later.

Answers

a) The maximum height reached by the projectile is approximately 67.35 meters.

b) 6 seconds later, the projectile will be at a horizontal position of approximately 155.33 meters and a vertical position of approximately 41.47 meters. The velocity at this time is approximately 19.98 m/s horizontally and -40.04 m/s vertically.

a) To find the maximum height reached by the projectile, we can use the kinematic equation for vertical motion. The formula to calculate the maximum height (h_max) is:

h_max = (V₀² * sin²θ) / (2 * g)

where V₀ is the initial velocity, θ is the launch angle, and g is the acceleration due to gravity.

Substituting the given values:

V₀ = 50 m/s

θ = 53° (converted to radians: 53° * π/180 ≈ 0.9273 rad)

g = 9.8 m/s²

h_max = (50² * sin²(0.9273)) / (2 * 9.8)

≈ 67.35 m

Therefore, the maximum height reached by the projectile is approximately 67.35 meters.

b) To find the position and velocity of the projectile 6 seconds later, we can analyze its horizontal and vertical motion separately.

For the horizontal motion, the projectile will continue to move at a constant velocity since there is no horizontal acceleration. Therefore, the horizontal position (x) will be:

x = V₀ * cosθ * t

Substituting the given values:

V₀ = 50 m/s

θ = 53° (converted to radians: 53° * π/180 ≈ 0.9273 rad)

t = 6 s

x = 50 * cos(0.9273) * 6

≈ 155.33 m

For the vertical motion, we can use the equation:

y = V₀ * sinθ * t - (1/2) * g * t²

Substituting the given values:

V₀ = 50 m/s

θ = 53° (converted to radians: 53° * π/180 ≈ 0.9273 rad)

g = 9.8 m/s²

t = 6 s

y = 50 * sin(0.9273) * 6 - (1/2) * 9.8 * 6²

≈ 41.47 m

Therefore, 6 seconds later, the projectile will be at a horizontal position of approximately 155.33 meters and a vertical position of approximately 41.47 meters.

The velocity at this time can be calculated by combining the horizontal and vertical components:

Vx = V₀ * cosθ

Vy = V₀ * sinθ - g * t

Substituting the given values:

V₀ = 50 m/s

θ = 53° (converted to radians: 53° * π/180 ≈ 0.9273 rad)

g = 9.8 m/s²

t = 6 s

Vx = 50 * cos(0.9273)

≈ 19.98 m/s

Vy = 50 * sin(0.9273) - 9.8 * 6

≈ -40.04 m/s

Therefore, the velocity of the projectile 6 seconds later is approximately 19.98 m/s in the horizontal direction and -40.04 m/s in the vertical direction.

To read more about projectile, visit:

https://brainly.com/question/8104921

#SPJ11

A duck has a mass of 2.90 kg. As the duck paddles, a force of 0.110 N acts on it in a direction due east. In addition, the current of the water exerts a force of 0.150 N in a direction of 51.0° south of east. When these forces begin to act, the velocity of the duck is 0.140 m/s in a direction due east. Find (a) the magnitude and (b) the direction (relative to due east) of the displacement that the duck undergoes in 3.10 s while the forces are acting. (Note that the angle will be negative in the south of east direction.) (a) Number 0.795 Units m (b) Number Units 13.96

Answers

a) The magnitude of the displacement that the duck undergoes is 0.795 m

b) The direction is 13.96° south of east.

Mass of duck is 2.90 kg, force acting in the direction due east is 0.110 N, and the force exerted by the current of the water in a direction of 51.0° south of east is 0.150 N.

The magnitude of the resultant force acting on the duck:

Fres = √(F1² + F2² + 2F1F2cosθ)

Where F1 = 0.110 N, F2 = 0.150 N, and θ = 51°south of east

Fres = √(0.110² + 0.150² + 2(0.110)(0.150)cos 51°)

Fres = 0.1907 N

The direction of the resultant force:

Fres = tanθ

Where θ = 51°south of east

Fres = tan 51°

Fres = 1.298N, south of east

The initial velocity of the duck is 0.140 m/s in the direction due east. The displacement that the duck undergoes in 3.10 s is given by:

s = ut + ½ at²

Where u = initial velocity of the duck, t = time taken and a = acceleration

a = F/m

Where F = resultant force and m = mass of the duck

a = 0.1907 N / 2.90 kg

a = 0.0658 m/s²s = (0.140 m/s)(3.10 s) + 1/2(0.0658 m/s²)(3.10 s)²s = 0.4309 m

Therefore, the magnitude of the displacement that the duck undergoes is 0.795 m rounded to three significant figures and the direction is 13.96° south of east rounded to two significant figures.

To know more about displacement, refer to the link below:

https://brainly.com/question/29769926#

#SPJ11

A penny has a mass of 2.50g and the Moon has a mass of ×7.351022kg . Use this information to answer the questions below. Be sure your answers have the correct number of significant digits. What is the mass of 1 mole of pennies? g Round your answer to 3 significant digits. How many moles of pennies have a mass equal to the mass of the Moon? Round your answer to 3 significant digits.

Answers

Therefore, there are 48.84 moles of pennies that have a mass equivalent to that of the Moon (rounded to 3 significant digits).

A mole of anything, whether it is pennies or anything else, is equivalent to Avogadro's number of atoms, molecules, or particles. Avogadro's number is given by 6.022 × 10²³.Using the mass of a single penny, we can calculate the mass of one mole of pennies by dividing the molar mass by Avogadro's number.

The molar mass is the mass of one mole of a substance, and it is equivalent to the atomic or molecular weight of a substance expressed in grams. It is the sum of all the atomic masses of an element's atoms. To begin, we must first convert the mass of a single penny from grams to kilograms: 2.50 g = 0.0025 kg .

The mass of one mole of pennies can now be calculated as follows: Molar mass = 0.0025 kg/mol = 0.0025 × 6.022 × 10²³= 15.055 × 10²⁰ g/mol or 1.506 × 10²¹ g/mol (rounded to 3 significant digits)Therefore, the mass of 1 mole of pennies is 1.506 × 10²¹ g/mol (rounded to 3 significant digits) .

To determine the number of moles of pennies required to equal the mass of the Moon, we will first convert the mass of the Moon from kilograms to grams.7.351 × 10²² g We'll then divide this mass by the mass of one mole of pennies:7.351 × 10²²g ÷ 15.055 × 10²⁰ g/mol= 48.84 moles of pennies . Therefore, there are 48.84 moles of pennies that have a mass equivalent to that of the Moon (rounded to 3 significant digits).

To know more about Mass  visit :

https://brainly.com/question/30337818

#SPJ11

The cholesterol content of large eggs of a particular brand is normally distributed with a mean of u = 195 mg and a standard deviation of o= 12 mg. Suppose we take a random sample of 50 eggs. What is

Answers

The sampling distribution of the mean of the cholesterol content of 50 eggs is normal with mean 195 and standard deviation 1.697 (rounded to 3 decimal places).

The central limit theorem states that the sampling distribution of the mean of a sufficiently large sample size from any population has a normal distribution, regardless of the population's distribution. As n >= 30, the sample size is large enough to use the central limit theorem in this case.The standard deviation of the sampling distribution, also known as the standard error of the mean (SEM), can be calculated using the formula: SEM = σ/√n, where σ is the population standard deviation and n is the sample size. Plugging in the given values, we get SEM = 12/√50 = 1.697 (rounded to 3 decimal places). Therefore, the sampling distribution of the mean of the cholesterol content of 50 eggs is normal with mean 195 and standard deviation 1.697 (rounded to 3 decimal places).

A measure of how dispersed the data are in relation to the mean is called the standard deviation (or ). Data with a low standard deviation are grouped around the mean, while data with a high standard deviation are more dispersed.

Know more about standard deviation, here:

https://brainly.com/question/29115611

#SPJ11

Find the Taylor series for f(x) centered at the given value of a. [Assume that f has a power series expansion. Do not show that Rn(x) → 0.]

f(x) = ln(x), a = 9

Find the associated radius of convergence R.

Answers

As per the information given in the question, the radius of convergence R is 0.

We may use the formula for the Taylor series expansion to determine the Taylor series for f(x) = ln(x) with a = 9.

f(x) = f(a) + f'(a)(x - a)/1! + f''(a)(x - a)^2/2! + f'''(a)(x - a)^3/3! + ...

f(x) = ln(x)

f'(x) = 1/x

f''(x) = -1/x^2

f'''(x) = 2/x^3

f''''(x) = -6/x^4

If a = 9:

f(a) = ln(9) = 2.197224577

f'(a) = 1/9 = 0.111111111

f''(a) = -1/(9^2) = -0.012345679

f'''(a) = 2/(9^3) = 0.002267574

f''''(a) = -6/(9^4) = -0.000793651

So,

f(x) ≈ 2.197224577 + 0.111111111(x - 9) - 0.012345679(x - 9)^2/2 + 0.002267574(x - 9)^3/6 - 0.000793651(x - 9)^4/24 + ...

This is the Taylor series expansion for ln(x) centered at a = 9.

We must think about the Taylor series' interval of convergence in order to determine the corresponding radius of convergence R.

Ln(x) is only defined in this situation if x > 0. The distance from the centre (a = 9) to the closest singularity or border of the function, which in this instance is 0 in this case, is known as the radius of convergence R.

Thus, the radius of convergence R is 0.

For more details regarding radius of convergence, visit:

https://brainly.com/question/31440916

#SPJ4

1. A ball is thrown upward from the top of a 100 meter high building with an initial speed of 20 m/s. a. How much time does it take to reach the ground? b. What velocity does it have when it reaches t

Answers

It takes approximately 4.52 seconds for the ball to reach the ground. When the ball reaches the ground, it has a velocity of approximately -44.3 m/s (negative indicating downward direction).

To determine the time it takes for the ball to reach the ground, we can use the equation of motion for vertical motion:

h = ut + (1/2)gt^2

where:

h = height (100 meters)

u = initial velocity (20 m/s)

g = acceleration due to gravity (-9.8 m/s^2, negative indicating downward direction)

t = time

We can rearrange the equation to solve for time (t):

t = (sqrt(2h/g))

Substituting the given values:

t = (sqrt(2 * 100 / 9.8)) ≈ 4.52 seconds

Therefore, it takes approximately 4.52 seconds for the ball to reach the ground.

To calculate the velocity of the ball when it reaches the ground, we can use the equation of motion:

v = u + gt

where:

v = final velocity (unknown)

u = initial velocity (20 m/s)

g = acceleration due to gravity (-9.8 m/s^2, negative indicating downward direction)

t = time (4.52 seconds)

Substituting the values:

v = 20 - 9.8 * 4.52 ≈ -44.3 m/s

Therefore, when the ball reaches the ground, it has a velocity of approximately -44.3 m/s (negative indicating downward direction).

a. The ball takes approximately 4.52 seconds to reach the ground.

b. When the ball reaches the ground, it has a velocity of approximately -44.3 m/s (negative indicating downward direction).

To know more about velocity, visit:

https://brainly.com/question/80295

#SPJ11

to calculate the radiation pressure on a highly polished metal surface, it would be best to use which approximation?

Answers

To calculate the radiation pressure on a highly polished metal surface, the most appropriate approximation to use is the small-angle approximation.

Radiation pressure refers to the pressure produced when electromagnetic radiation is absorbed or reflected by a surface. A highly polished metal surface is highly reflective, and therefore is expected to produce high radiation pressure.

The small-angle approximation is the assumption that the angle of incidence is small enough such that the sine of the angle is equal to the angle itself. This approximation is particularly useful in situations where the angle of incidence is small relative to 1 radian or less. This approximation can be used to calculate radiation pressure on highly polished metal surfaces because the angle of incidence is usually small (typically less than 1 radian), and therefore can be approximated using the small-angle approximation.

To know more about pressure visit:

https://brainly.com/question/29341536

#SPJ11

how long (in nsns ) does it take light to travel 1.00 mm in vacuum?

Answers

The time taken by the light to travel 1.00 mm in vacuum is 3.33 × 10⁻⁹ nsns.

Light is an electromagnetic wave, which is a transverse wave that does not need a medium to travel through. In vacuum, light travels at a constant speed of 2.99792458 × 10⁸ m/s. It implies that if light travels for one second in vacuum, it will cover a distance of approximately 299,792,458 meters, that is 299,792,458,000,000 nanometers.

Therefore, the time taken by the light to travel 1.00 mm (1 × 10⁻³ m) in vacuum is;

Time = distance/speed of light in vacuum

= 1.00 × 10⁻³ m / 2.99792458 × 10⁸ m/s

= 3.33 × 10⁻⁹ s

= 3.33 × 10⁻⁹ nsns.

This calculation is done by dividing the distance light has to travel by its speed in vacuum.

Learn more about electromagnetic wave here:

https://brainly.com/question/8553652

#SPJ11

determine the ph of a solution prepared by adding 0.0500 mole of solid ammonium chloride to 100. millilitres of a 0.150 molar solution of ammonia. hint: use an ice box to help you solve this.

Answers

The pH of the solution is 8.79.

The pH of a solution prepared by adding 0.0500 mole of solid ammonium chloride to 100 millilitres of a 0.150 molar solution of ammonia can be determined as follows:

Step 1: Write the balanced equation for the dissociation of ammonium chloride (NH4Cl).NH4Cl (s) ⇌ NH4+ (aq) + Cl- (aq)

Step 2: Calculate the initial moles of NH3 (ammonia) in the solution.Initial moles of NH3 = 0.150 moles/L × 0.100 L = 0.015 moles

Step 3: Calculate the initial moles of NH4+ produced.Initial moles of NH4+ = 0.0500 moles

Step 4: Calculate the initial moles of Cl- produced.Initial moles of Cl- = 0.0500 moles

Step 5: Determine the change in moles of NH4+ and NH3 using the ICE table.Initially NH4+ (aq): 0.0500 mol (0 mol)NH3 (aq): 0.015 mol (0.015 mol)Change: -0.0500 mol + 0.0500 molEquilibrium: 0 mol (0.015 mol)Initially Cl- (aq): 0 mol (0 mol)Change: 0.0500 mol + 0 molEquilibrium: 0.0500 mol (0 mol)

Step 6: Calculate the concentration of NH3 and NH4+ at equilibrium.NH4+ (aq) = 0.0500 moles/0.100 L = 0.500 MNH3 (aq) = (0.015 moles + 0.0500 moles)/0.100 L = 0.650 M

Step 7: Calculate the value of Kb for ammonia.Kb for ammonia = Kw/Ka = 1.00 × 10-14/1.8 × 10-5 = 5.56 × 10-10

Step 8: Calculate the concentration of OH- at equilibrium.OH- (aq) = √(Kb [NH4+])/[NH3] = √(5.56 × 10-10 × 0.500)/0.650 = 6.21 × 10-6 M

Step 9: Calculate the pH of the solution.pOH = -log10(OH-) = -log10(6.21 × 10-6) = 5.207pH = 14.00 - pOH = 14.00 - 5.207 = 8.79

The pH of the solution prepared by adding 0.0500 mole of solid ammonium chloride to 100 millilitres of a 0.150 molar solution of ammonia was calculated using the ICE box method

. The initial concentration of NH3 was calculated to be 0.015 moles, and the initial concentration of NH4+ and Cl- was 0.0500 moles each.

After determining the equilibrium concentrations of NH3 and NH4+ ions, the value of Kb for ammonia was calculated to be 5.56 × 10-10.

The concentration of OH- at equilibrium was calculated to be 6.21 × 10-6 M, and the pH of the solution was determined to be 8.79.

In conclusion, the pH of the solution is 8.79.

To know more about ammonium chloride visit:

brainly.com/question/14501371

#SPJ11

you push your little sister on a swing and in 2 minutes you make 45 pushes. what is the frequency of your swing? answer in units of hz.

Answers

The frequency of the swing is approximately 0.375 Hz. The frequency of the swing can be calculated using the formula: Frequency = Number of cycles / Time

The frequency of the swing can be calculated using the formula:

Frequency = Number of cycles / Time

In this case, each push of the swing can be considered a cycle. Given that you make 45 pushes in 2 minutes, we can convert the time to seconds by multiplying by 60:

Time = 2 minutes * 60 seconds/minute = 120 seconds

Now we can calculate the frequency:

Frequency = 45 pushes / 120 seconds

Frequency ≈ 0.375 Hz

Therefore, the frequency of the swing is approximately 0.375 Hz.

To learn more about frequency click here

https://brainly.com/question/2140860

#SPJ11

2) A car is driving forward while speeding up. If the car is moving in the +x direction, a) What is the direction of the angular velocity vector of its wheels? b) What is the direction of the angular

Answers

a) The direction of the angular velocity vector of the car's wheels depends on the type of wheels and their rotation.

b) The direction of the angular acceleration of the wheels can be determined based on the change in angular velocity.

Assuming the car has standard wheels that rotate in a clockwise direction when viewed from the front, the direction of the angular velocity vector would be in the -z direction (opposite to the direction of the positive z-axis in a right-hand coordinate system).

This is because, as the car speeds up in the +x direction, the wheels rotate in the opposite direction to generate forward motion.

Since the car is speeding up, the angular acceleration of the wheels would be in the +z direction (following the right-hand rule).

The angular acceleration is in the same direction as the change in angular velocity and helps to increase the rotational speed of the wheels as the car accelerates forward.

To know more about velocity refer here:

https://brainly.com/question/17127206#

#SPJ11

2. Suppose you set up a circuit with an AC power supply whose PEAK voltage is 8.00V. Suppose that the frequency is 30Hz. Based on your experience in lab, what will a voltmeter read if it is set on DC?

Answers

If an AC power supply with a peak voltage of 8.00V and a frequency of 30Hz is measured using a DC voltmeter, it will read approximately 5.65V, which is the average value of the AC waveform. The reading does not represent the peak or instantaneous values.

If an AC power supply with a peak voltage of 8.00V and a frequency of 30Hz is connected to a voltmeter set on DC, the voltmeter will read the average or RMS (root mean square) value of the AC voltage.

In this case, the voltmeter will read approximately 5.65V.

When an AC waveform is measured using a DC voltmeter, the meter will display the average value of the waveform.

The average value of an AC waveform is related to its peak value by a factor known as the form factor. For a sinusoidal waveform like the one described, the form factor is approximately 0.707.

To calculate the average value, we multiply the peak voltage by the form factor. In this case, 8.00V * 0.707 = 5.65V.

Therefore, if a voltmeter set on DC is used to measure the AC voltage with a peak value of 8.00V and a frequency of 30Hz, it will display an approximate reading of 5.65V.

It's important to note that the reading will only represent the average value of the AC waveform, and not the peak or instantaneous values.

To know more about peak voltage refer here:

https://brainly.com/question/16662585#

#SPJ11

Find the gauge pressure in the jar, in units of Pa. Assume the density of mercury is 13.5 g/cm³.
a. Gauge pressure
b. 13.5 g/cm³

Answers

The gauge pressure in the jar is -89945.95 Pa (approximated to two significant figures).

We can use the following formula to find the pressure, `p=hρg`,

where,

h is the height of the mercury column,ρ is the density of mercury, and

g is the acceleration due to gravity.

The pressure at the bottom of the jar is equal to the pressure due to the mercury column and the atmospheric pressure.`pabs = hρg + patm`

Substituting the values,

`pabs = 7.10 × 13.5 × 9.8 + 1.01 × 10⁵` = 10,754.05 Pa

Now, we can calculate the gauge pressure by using the formula;

`pgauge = pabs - patm``

pgauge = 10,754.05 - 1.01 × 10⁵``

pgauge = -89945.95 Pa`

Learn more about acceleration at:

https://brainly.com/question/31696858

#SPJ11

The gauge pressure in the jar is 19822.5 Pa. Given that density of mercury is 13.5 g/cm³. Gauge pressure in the jar is given by: P_gauge = hρg

Let's first find the absolute pressure in the jar. Pressure due to air = 1 atm. Pressure due to mercury = hρgThe total pressure P in the jar is the sum of the two pressures: P = P_air + P_mercuryP = 1 atm + hρg. Since gauge pressure is the difference between the absolute pressure and the atmospheric pressure, gauge pressure is: P_gauge = P - P_atmP_gauge = (1 atm + hρg) - 1 atmP_gauge = hρgwhere h is the height of mercury in the tube.

Using the given density of mercury, we can express it in kg/m³:ρ = 13.5 g/cm³ = 13500 kg/m³. Thus, gauge pressure in the jar is given by:P_gauge = hρg, Where, h = 15cm = 0.15m, ρ = 13500 kg/m³, g = 9.81 m/s². So,P_gauge = 0.15 m × 13500 kg/m³ × 9.81 m/s²= 19822.5 Pa. Hence, the gauge pressure in the jar is 19822.5 Pa.

To know more about gauge pressure, refer

https://brainly.com/question/30698101

#SPJ11

i
need help
i attempted it but i dont thunk i did it right
Jason is on the cliff and dropped a rock, if the rock takes 10.1 seconds to reach the ground, how high is the cliff? Express your answer in meters (m)

Answers

The height of the cliff is approximately 495 meters. This was determined by using the equation of motion for free fall and the time it took for the rock to reach the ground.

To determine the height of the cliff, we can use the equation of motion for free fall:

[tex]h = \frac{1}{2} g t^2[/tex]

Where:

h is the height of the cliff

g is the acceleration due to gravity (approximately 9.8 m/s²)

t is the time it takes for the rock to reach the ground

Given:

t = 10.1 seconds

Substituting the values into the equation:

[tex]h = \frac{1}{2} \cdot 9.8 \,\text{m/s}^2 \cdot (10.1 \,\text{s})^2[/tex]

Calculating the expression:

h ≈ 494.99 meters

Therefore, the height of the cliff is approximately 494.99 meters.

To know more about the height of the cliff refer here :

https://brainly.com/question/20849502#

#SPJ11

A Thomson's gazelle can run at very high speeds, but its acceleration is relatively modest. A reasonable model for the sprint of a gazelle assumes an acceleration of 4. 2 m/s2 for 6. 5 s , after which the gazelle continues at a steady speed

Answers

The gazelle travels 88.725 meters during the sprint.  We use the following equation to calculate the distance traveled by the gazelle during the sprint: `d = vit + 0.5at²

A Thomson's gazelle can run at very high speeds, but its acceleration is relatively modest. A reasonable model for the sprint of a gazelle assumes an acceleration of 4.2 m/s² for 6.5 s, after which the gazelle continues at a steady speed.

The gazelle's initial velocity is zero because it starts from rest. We can use the following equation to calculate the distance traveled by the gazelle during the sprint: `d = vit + 0.5at²`, where d is the distance traveled, vi is the initial velocity, a is the acceleration, and t is the time elapsed.

1. Substitute the given values into the equation.  

`d = 0 + 0.5(4.2)(6.5)²`

2. Solve for d.  

`d = 0 + 0.5(4.2)(42.25)`  

`d = 88.725`

Therefore, the gazelle travels 88.725 meters during the sprint.

To know more about distance traveled, refer

https://brainly.com/question/28529268

#SPJ11

What angular acceleration would you expect from a rotating object with rotational inertia of 0.0655 kg.m² that was subjected to a net torque of 4.25 N·m? 2) If gravity is used to produce a torque applied to a rotating platform, do you expect the angular acceleration to be constant? Why or why not? 3) Would frictional errors affect this lab more or less if you had used a rotating system with a much larger rotational inertia? Explain your answer?

Answers

1) The formula for torque is given by τ = Iα where τ is the torque, I is the rotational inertia and α is the angular acceleration. The angular acceleration of a rotating object with a rotational inertia of 0.0655 kg.m² and subjected to a net torque of 4.25 N.

m is given by

α = τ/I

= 4.25/0.0655

= 64.885 m/s²2) No, the angular acceleration produced by gravity is not constant because the force acting on the rotating platform is not constant. As the platform rotates, the direction of the force due to gravity changes with the position of the platform. Therefore, the torque produced by gravity is not constant and hence the angular acceleration is not constant.3) If a rotating system with much larger rotational inertia is used, frictional errors will affect the lab less. This is because the larger the rotational inertia of a system, the less it is affected by external forces such as friction. This means that if the system has a larger rotational inertia, it will be less affected by frictional errors compared to a system with a smaller rotational inertia.

For more information on torque visit:

brainly.com/question/30338175

#SPJ11

A ball with an initial velocity of 8.4 m/s rolls up a hill without slipping.
a) Treating the ball as a spherical shell, calculate the vertical height it reaches, in meters.
b) Repeat the calculation for the same ball if it slides up the hill without rolling.

Answers

a)Treating the ball as a spherical shell, the vertical height it reaches is 36.43 meters.

b) The vertical height it reaches is 8.68 times the distance traveled by the ball up the hill.

a) Assuming that the ball is a spherical shell and using the formula for potential energy and kinetic energy, we get:Initial Kinetic Energy (Ki) = 1/2 mu²

Potential Energy at maximum height (P) = mgh

Final Kinetic Energy (Kf) = 0

Total Mechanical Energy (E) = Ki + P = Kf

Applying this principle, we get:

mgh + 1/2 mu² = 0 + 1/2 mv² ⇒ gh + 1/2 u² = 1/2 v²

At the maximum height, the velocity of the ball will become zero (v = 0) and we can calculate the value of h using the above equation:

gh + 1/2 u² = 0h = u² / 2g = (8.4)² / 2 × 9.8 = 36.43 m

Therefore, the vertical height it reaches is 36.43 meters.

b)The formula can be represented as:

F × s = mgh - 1/2 mu²

Substituting the values, we get:

F × s = mgh - 1/2 mu²

F × s = mg(h - 1/2 u² / mg)

The maximum vertical height (h) can be calculated as:h = s + 1/2 u² / g + μk × s

The first two terms in the above equation represent the maximum height the ball can reach due to its initial velocity while the third term represents the extra height the ball can reach due to the frictional force acting on it.

h = s + 1/2 u² / g + μk × s = s + (8.4)² / 2 × 9.8 + 0.392s = 8.68s

Learn more about vertical height at:

https://brainly.com/question/32562627

#SPJ11

Treating the ball as a spherical shell, its maximum vertical height is 1.31 meters.

a) Treating the ball as a spherical shell, the vertical height it reaches can be calculated using the following equation:

mg = (2/5)Mv²

where,

m = 1.8 kg (mass of ball)

g = 9.8 m/s² (acceleration due to gravity)

h = ? (maximum vertical height)

M = 2/3mr² (moment of inertia of a spherical shell) = 1.2 mr²v = 8.4 m/s (initial velocity)

The equation can be simplified as follows:mgh = (2/5)Mv² ⇒ gh = (2/5) (v²/M) = (5/7) v² / r²

Hence, the maximum vertical height it reaches can be calculated as:h = v² / 2g * (5/7)r²h = (8.4)² / (2 × 9.8) × (5/7) × (0.3²)h = 1.31 meters

Therefore, treating the ball as a spherical shell, its maximum vertical height is 1.31 meters.

Given data:

Mass of ball, m = 1.8 kg

Initial velocity, v = 8.4 m/s

Radius of the ball, r = 0.3 m

Acceleration due to gravity, g = 9.8 m/s²

Calculating the maximum vertical height it reaches: Consider the ball a spherical shell.

Moment of inertia of a spherical shell, M = 2/3mr² = 1.2 mr²Now, the work done on the ball by the force of gravity (mgh) must be equal to its gain in kinetic energy (1/2mv²). By conservation of energy,mgh = (1/2)mv² ---(1)Also, by the work-energy principle, the total work done on the ball is equal to its change in kinetic energy. By treating the ball as a spherical shell, the total work done on the ball by the force of gravity can be found as shown below:

When the ball reaches the maximum height h, its speed becomes zero. Therefore, its kinetic energy becomes zero. Hence, the total work done by the force of gravity can be found by calculating the difference between the kinetic energy of the ball at the top and its kinetic energy at the bottom.

Total work done on the ball by gravity = Change in kinetic energy= 1/2m0² - 1/2mv²= - 1/2mv² --- (2) (Since the ball initially rolls without slipping, its velocity at the bottom of the hill is equal to the velocity at the top of the hill, which is zero)Now, equating equations (1) and (2), we get:

mgh = - 1/2mv²gh = (1/2)mv²/m --- (3)But, v = u + gt

where, u = 8.4 m/s (initial velocity)

t = Time taken by the ball to reach the maximum height

Let's find out t:

When the ball reaches the maximum height, its final velocity becomes zero. Hence, by the first equation of motion, we have:v = u + gt0 = 8.4 + (-9.8)t

Solving for t, we get:t = 0.857 seconds

Substituting the value of t in equation (3), we get:gh = (1/2)(8.4)² / (1.8) × (0.3)²gh = 1.31 meters

Learn more about kinetic energy: https://brainly.com/question/999862

#SPJ11

the cable supports the three loads shown. determine the sags yb and yd of b and d. take p1 = 800 n, p2 = 500 n.

Answers

The cable supports the three loads shown, the sag of point B in the cable is 0.044 m and the sag of point D in the cable is 0.075 m.

For determining this, we can use the formula:

[tex]y=\frac{wL^2}{8T} \\\\[/tex]

At point A, the tension in the cable is:

[tex]T_A=P_1+P_2[/tex]

[tex]T_A=[/tex] 800N + 500N

=1300N

At point B:

[tex]T_B=T_A+P_2[/tex]

[tex]T_B=[/tex] 1300N + 500N

= 1800N

At point C:

[tex]T_C=T_B+P_3[/tex][tex]T_C=[/tex] 1800N + 600N

= 2400N.

Now,

[tex]y_B=\frac{wL^2_{AB}}{8T_B} \\\\y_D=\frac{wL^2_{CD}}{8T_D}[/tex]

Substituting the values:

[tex]y_B=\frac{(1)(4)^2}{8(1800)} =0.044m\\\\y_D=frac{(1)(6)^2}{8(2400)} =0.075m[/tex]

Thus, the sag of point B in the cable is 0.044 m and the sag of point D in the cable is 0.075 m.

For more details regarding tension, visit:

https://brainly.com/question/32506605

#SPJ4

Your question seems incomplete, the probable complete question is:

the cable supports the three loads shown. determine the sags yb and yd of b and d. take p1 = 800 n, p2 = 500 n.

In which one of the following situations does a car have an eastward acceleration? The car travels westward and slows down (a) and (d) The car travels westward at constant speed The car travels eastwa

Answers

The car has an eastward acceleration when it travels westward and slows down.

When a car travels westward at a constant speed, its velocity is directed to the west and remains constant. Acceleration is the rate of change of velocity, and if the car's velocity remains constant, then the acceleration is zero. Therefore, there is no eastward acceleration in this situation.

When the car travels eastward and speeds up, its velocity is directed to the east, and the rate of change of velocity is positive. This means that the car has an eastward acceleration.

When the car travels westward and slows down, its velocity is still directed to the west, but the rate of change of velocity is negative. In this case, the car experiences a westward deceleration, but there is no eastward acceleration.

Finally, when the car travels eastward and slows down, its velocity is directed to the east, but the rate of change of velocity is negative. This means that the car experiences a westward deceleration, and there is no eastward acceleration.

In summary, the car has an eastward acceleration when it travels eastward and speeds up.

To know more about acceleration refer here:

https://brainly.com/question/30499732#

#SPJ11

Complete Question:

In which one of the following situations does the car have a eastward acceleration. The car travels westward at constant speed. The car travels eastward and speeds up. The car travels westward and slows down The car travels eastward and slows down.

suppose you aare traveling in a spaceship at a velocity close to the speed of light. which of the following would you notice?

Answers

If an individual is traveling in a spaceship at a velocity close to the speed of light, he will observe the following effects:Length contraction: When an individual travels near the speed of light, the length of the object is seen shorter than its proper length in the direction of motion.

Time dilation: When an individual travels near the speed of light, he will observe that time slows down for the object in motion in comparison to the object at rest. This means that the time duration of the object moving is less than the time duration of the object at rest.Energy: When an individual travels near the speed of light, the kinetic energy of the object will increase rapidly with an increase in speed. Therefore, the mass of the object will also increase.Spacecraft: There is a term called "relativistic mass," which means that as the object's velocity gets closer to the speed of light, the mass of the object will also increase. But the mass of the spacecraft cannot exceed its mass at rest.Velocity: An individual traveling in a spacecraft at a velocity close to the speed of light would observe length contraction, time dilation, and an increase in kinetic energy with increasing velocity but would not observe the mass of the spacecraft exceeding its mass at rest.Hence, these are the observations that an individual would notice when traveling in a spaceship at a velocity close to the speed of light.

For more information on motion visit:

brainly.com/question/2748259

#SPJ11

A sphere of radius R has charge Q. The electric field strength at distance r>R is Ei. Each Part in this question changes only one quantity; the other quantities have their initial values.
A) What is the ratio Ef/Ei of the final to initial electric field strengths if Q is halved?
B) What is the ratio Ef/Ei of the final to initial electric field strengths if R is halved?
C) What is the ratio Ef/Ei of the final to initial electric field strengths if r is halved (but is still >R)?

Answers

The ratio Ef/Ei of the final to initial electric field strengths, if Q is halved, is 1/2. B) The ratio Ef/Ei of the final to initial electric field strengths, if R is halved, is 4. C) The ratio Ef/Ei of the final to initial electric field strengths if r is halved (but is still >R) is 2. The correct option is A).

Given that Sphere of radius R has charge Q. The electric field strength at a distance r > R is Ei. Therefore, the electric field intensity at a distance from the center of a charged sphere of radius R is:

Ei = kQ/R² ... (1)

Now,

A) When Q is halved, the electric field intensity

[tex]Ef isEf = kQ/2R² ... (2)[/tex]

Therefore, the ratio of the electric field intensity at r > R after Q is halved and before halving is:

[tex]++Ef/Ei = (kQ/2R²)/(kQ/R²) = 1/2B)[/tex]

When R is halved, the electric field intensity

[tex]Ef isEf = kQ/(R/2)² = 4kQ/R² ... (3)[/tex]

Therefore, the ratio of the electric field intensity at r > R after R is halved and before halving is:

[tex]Ef/Ei = (4kQ/R²)/kQ/R² = 4C)[/tex]

When r is halved (but still >R), the electric field intensity Ef is

[tex]r = R/2...[/tex]

Therefore, the ratio of the electric field intensity at r > R after r is halved and before halving is:

[tex]Ef/Ei = kQ/(R/2)² / kQ/R² = 2.[/tex]

Hence, the required ratios are A) 1/2 B) 4 C) 2. Therefore, the correct option is A).

To know more about electric field strengths, visit:

https://brainly.com/question/3405913

#SPJ11

Why do you think Canada has become a popular destination for
refugees?

Answers

Canada is known for being a country that is open to refugees from around the world and provides them with a safe haven from persecution and conflict. There are several reasons why Canada has become a popular destination for refugees

The reasons include the following: Canada is a peaceful and multicultural country. Canada is known for being a country that is open to refugees from around the world and provides them with a safe haven from persecution and conflict. This is because Canada is a peaceful country that is tolerant of different cultures, religions, and backgrounds, and has a history of welcoming refugees and immigrants from all over the world. Canada's reputation as a tolerant and welcoming society is a major factor in attracting refugees to the country.Canada has a well-established refugee program. Canada has a well-established and robust refugee resettlement program that provides refugees with a range of services and support, including assistance with housing, education, and employment. The Canadian government provides financial assistance to refugees and helps them to integrate into Canadian society. This makes Canada an attractive destination for refugees who are looking for a safe and secure place to live.Canada has a strong economy. Canada's economy is one of the strongest in the world, and this provides refugees with a range of opportunities to find work and build a new life for themselves. Canada's strong economy also means that refugees have access to high-quality healthcare, education, and other social services that can help them to rebuild their lives.Canada has a good record of human rights. Canada has a good record of respecting human rights and promoting social justice, and this is an important factor for refugees who are looking for a safe and secure place to live. Canada's commitment to human rights is reflected in its laws and policies, which are designed to protect the rights of all Canadians, including refugees.

Learn more about Canada at

brainly.com/question/30242939

#SPJ11

How long tg does it take for the balls to reach the ground? Use 10 m/s2 for the magnitude of the acceleration due to gravity. Express your answer in seconds to one significant figure. View Available Hint(s) Hint 1. How to approach the problem The balls are released from rest at a height of yo 5.0 m at time to 0 s Using these numbers and the kinematic equation y yo vot(1/2)at2 you can determine the amount of time it takes for the balls to reach the ground

Answers

The time taken for the ball to reach the ground is 1.4 seconds.

Using the given data and kinematic equation y = yo + vot (1/2)at² we have calculated the time taken by the ball to reach the ground. The initial velocity of the ball is zero. The initial height of the ball is 5.0m and using the given value of acceleration due to gravity g which is 10m/s², we can find out the time taken by the ball to reach the ground.

Using the given formula, y = yo + vot (1/2)at². Here, y = 0, yo = 5.0m, vo = 0, a = g = 10m/s²t = sqrt(2 * 5.0 / 10) = 1.4s. Therefore, the time taken for the ball to reach the ground is 1.4 seconds.

Learn more about kinematic equation here:

https://brainly.com/question/28973409

#SPJ11

the massless spring of a spring gun has a force constant k = 12n/cm

Answers

The spring potential energy (U) stored in the spring when compressed to 8 cm is 3.84 J.

The massless spring of a spring gun has a force constant k = 12 N/cm.

We need to determine the spring potential energy (U) stored in the spring when compressed to 8 cm.

The given variables are force constant k and displacement x of the massless spring.

Recall the formula for spring potential energy Spring potential energy (U) stored in the spring is given by:U = (1/2) k x²where:k is the force constant of the springx is the displacement of the spring from its equilibrium position

Substitute the given values in the formula

The displacement of the spring is 8 cm = 0.08 m

The force constant of the spring is k = 12 N/cm = 1200 N/m

Therefore, the spring potential energy (U) stored in the spring when compressed to 8 cm is:U = (1/2) k x²U = (1/2) × 1200 N/m × (0.08 m)²U = 3.84 J

Therefore, the spring potential energy (U) stored in the spring when compressed to 8 cm is 3.84 J.

Learn more about potential energy

brainly.com/question/24284560

#SPJ11

Other Questions
Which of the following is most likely to be both a symbolic boundary and a physical boundary? A. The doors of a mosque, synagogue, or gurdwara. B. A railroad track C. A street crossing D. A book cover .[The following information applies to the questions displayed below.]Knickknack, Inc., manufactures two products: odds and ends. The firm uses a single, plantwide overhead rate based on direct-labor hours. Production and product-costing data are as follows:OddsEndsProduction quantity1,000units5,000unitsDirect material$160$240Direct labor (not including setup time)120(4 hr. at $30)180(6 hr. at $30)Manufacturing overhead*384(4 hr. at $96)576(6 hr. at $96)Total cost per unit$664$996 The pressure of water flowing through a 6.5102 m -radius pipe at a speed of 2.0 m/s is 2.2 105 N/m2.a.) What is the flow rate of the water?b.) What is the pressure in the water after it goes up a 6.0 m -high hill and flows in a 4.1102 m -radius pipe? On the moon. How does the angle of sunlight make the craters in hte two regions appear different? I which case is it eaiser to identify the depth and detail of the crater? A 26.0 kg box is released on a 26 incline and accelerates down the incline at 0.30 m/s^2.a. find the friction force impeding its motion. express your answer using two significant figures.b. Determine the coeddicient of kinetic friction.express yyou answer using two significant figures. .Carlos Cavalas, the manager of Echo Products' Brazilian Division, is trying to set the production schedule for the last quarter of the year. The Brazilian Division had planned to sell 69,960 units during the year, but by September 30 only the following activity had been reported.UnitsInventory, January 10Production2,000Sales2,000Inventory, September 30400The division can rent warehouse space to store up to 1,000 units. The minimum inventory level that the division should carry is 50 units. Mr. Cavalas is aware that production must be at least 200 units per quarter in order to retain a nucleus of key employees. Maximum production capacity is 1,500 units per quarter. Demand has been soft, and the sales forecast for the last quarter is only 600 units. Due to the nature of the division's operations, fixed manufacturing overhead is a major element of product cost.Assume that the division is using variable costing. How many units should be scheduled for production during the last quarter of the year? (The basic formula for computing the required production for a period in a company is Expected sales + Desired ending inventory - Beginning inventory = Required production.) Show computations and explain your answer. Will the number of units scheduled for production affect the division's reported income or loss for the year? Explain.Assume that the division is using absorption costing and that the divisional manager is given an annual bonus based on divisional operating income. If Mr. Cavalas wants to maximize his division's operating income for the year, how many units should be scheduled for production during the last quarter? (See the formula in 1 above.) Explain.Identify the ethical issues involved in the decision Mr. Cavalas must make about the level of production for the last quarter of the year. Explain "grammatical relations", then explain the differencebetween case, agreement and word order, giving (real or made up)examples of each in action. Complete this sequence of numbers such that the difference between any two adjacent numbers is the same : 3/k, _, _, 9/2k. Which of the following is least related to Value Stream Mapping?Answers:A. Nonvalue activityB. TimeC. CostD. Reengineering how much total precipitation is there for each weather condition? (note: precipitation is an integer and weathercondition are types of weather (sunny, rain, snow, etc...)) Summarize the following article: "Going Mobile" by Andrea Levereon the The New York Times 05/04/2014, on page SR/?_php=true&_type=blo Navel County Choppers, Inc., is experiencing rapid growth. The company expects dividends to grow at 18 percent per year for the next 11 years before leveling off at 4 percent into perpetuity. The required return on the companys stock is 10 percent. If the dividend per share just paid was $1.94, what is the stock price? Given a script with 3 variables x, y, z and input m n what will be the value of the variable z 1. A. space 2. B. n 3. C. empty 4. D.m 5. E.mn shot Question 4 Not yet answered Points out of 1.00 Flag question Question 5 Not yet answered Points out of 1.00 Flag question Question 6 Not yet answered Points out of 1.00 P Flag question The major provision of the Pregnancy Discrimination Act of 1978 was that. Select one: O a.employers could not discriminate against employees based on family status O b. maternity leave was to be treated the same as other personal or medical leaves O c. pregnant employees are entitled to 12 weeks of paid maternity leave O d. pregnant employees are to be given 12 weeks family leave without pay Retention evaluation is a facet of the HR roles of Select one: O a. planning and staffing O b. employee and labor relations O c. compensation and benefits O d. training and development The fundamental job duties of the employment position that an individual with a disability holds or desires are called Select one: O a. job specifications O b. minimum job requirements O c. essential job functions O d. reasonable accommodations Next page which customer in the dataset has spent the most on products? the quantity multiplied by the unit price will give you the total dollar amount spent per invoice line. 1-A clothing company manufacturers only dresses and hats. with its current resources it is capable of producing the following daily combinations:0 dresses + 20 hats2 dresses + 19 hats4 dresses + 18 hats6 dresses + 16 hats8 dresses + 10 hats10 dresses + 0 hatsSuppose that this company is currently producing a combination of 5 dresses and 14 hats. What might we conclude?A-This is an efficient combinationb-This is an inefficient combinationc-The company is not using the best available technology to produce the goodsd-Some of its workers are loafing on the jobf-The company is producing on its PPF2-A clothing company manufacturers only dresses and hats. with its current resources it can only manufacture the following daily combinations:0 dresses + 20 hats2 dresses + 19 hats4 dresses + 18 hats6 dresses + 16 hats8 dresses + 10 hats10 dresses + 0 hatsCurrently the company is producing 4 dresses and 10 hats when a customer order 4 dresses. What is the opportunity cost of filling this new order in terms of hats sacrificed? Type your answer as a number.there are two questions if you are very good with economics than solve it, please dont waste my time if you dont know it because i will dislike you and report you Tax from Friends Partnership has three partners. The balance of each partner capital is: Ala $48,000; Mariam $50,000 and Fatima $52.000. Alla withdraws from the Partnership. The remaining partners, Mariam and Fatima, agreed to pay cash of $56,000 for Alla from partnership. The partners share income and loss equally Required How much is the capital balance for the remaining partners Mariam and Fatma after the withdrawal of Alla In order to implement the insert() function for a heap implemented using a vector A containing n values do the following: A: Place new element in A[n], then sift-down(A[n])B: Place new element in A[0], then sift-down(A[0])C: Place new element in A[n], then sift-up(A[n])D: Place new element in A[0], then sift-up(A[0])Group of answer choicesABCD In your own words, explain WHY is the assumption of ceteris paribus important? Find the point of inflection of the graph of the function. (If an answer does not exist, enter DNE.) f(x)=sin2x,[0,4](x,y)=( Describe the concavity of the graph of the function. (Enter your answers using interval notation. If an answer does not exist, enter DNE.) concave upward concave downward Find the point of inflection of the graph of the function. (If an answer does not exist, enter DNE.) f(x)=5sec(x2),(0,4)(x,y)=( Describe the concavity. (Enter your answers using interval notation. If an answer does not exist, enter DNE.) concave upward concave downward