The cost of running the refrigerator for 30 days is 18.72 dollars.
The energy usage of a refrigerator with a 1000 W compressor that runs only 20% of the time is to be calculated in dollars per kWh, as electricity costs 0.13 dollars/kWh.SolutionThe energy consumption of a refrigerator can be determined by calculating the energy consumed over time. Let's assume that electricity costs 0.13 dollars/kWh.Cost of running the refrigerator in 1 hour = 0.13 * 1kW = 0.13 dollars
Since the compressor only runs 20% of the time, its running time will be 0.2 * 1 hour = 0.2 hoursThe energy used by the refrigerator in 30 days is the product of energy used per hour and the number of hours in 30 days. There are 24 hours in a day, so there are 24 * 30 = 720 hours in 30 days.
Cost of running the refrigerator in 0.2 hours = 0.13 * 1kW * 0.2 = 0.026 dollars
Cost of running the refrigerator in 30 days = 720 * 0.026 dollars= 18.72 dollars
To know more about internal energy visit:
https://brainly.com/question/11742607
#SPJ11
MY NOTES A 35.0-kg child swings in a swing supported by two chains, each 2.90 m long. The tension in each chain at the lowest point is 432 N (a) Find the child's speed at the lowest point. m/s (b) Fin
A 35.0-kg child swings in a swing supported by two 2.90 m long chains. At the lowest point, the child's speed is approximately 7.91 m/s, and the total mechanical energy is around 973.37 J.
To determine the child's speed at the lowest point of the swing, we can consider the conservation of mechanical energy.
At the lowest point, the child's potential energy is at its minimum, and all the energy is converted into kinetic energy. We can use the equation:
[tex]mgh = 1/2 mv^2[/tex]
where m is the mass of the child (35.0 kg), g is the acceleration due to gravity ([tex]9.8 m/s^2[/tex]), h is the height (in this case, the length of the chains, 2.90 m), and v is the velocity or speed at the lowest point (to be found).
Plugging in the values, we have:
[tex](35.0 kg)(9.8 m/s^2)(2.90 m) = 1/2 (35.0 kg) v^2[/tex]
Simplifying the equation, we can solve for v:
[tex]v = \sqrt{((2(35.0 kg)(9.8 m/s^2)(2.90 m))/(35.0 kg))}[/tex]
Calculating this expression gives us v ≈ 7.91 m/s.
To find the total mechanical energy at the lowest point, we can use the equation:
Total Mechanical Energy = Potential Energy + Kinetic Energy
At the lowest point, the potential energy is zero, and thus, the total mechanical energy is equal to the kinetic energy. Using the formula for kinetic energy:
Kinetic Energy =[tex]1/2 mv^2[/tex]
Substituting the given values:
Kinetic Energy = [tex]1/2 (35.0 kg) (7.91 m/s)^2[/tex]
Calculating this expression, we find the total mechanical energy to be approximately 973.37 J (joules).
To know more about total mechanical energy refer here:
https://brainly.com/question/13793529#
#SPJ11
Complete question:
A 35.0-kg child swings in a swing supported by two chains, each 2.90 m long. The tension in each chain at the lowest point is 432 N. (a) Find the child's speed at the lowest point. (b) Find the total mechanical energy of the child at the lowest point.
Suppose a multiple regression model is fitted into a variable called model. Which Python method below returns fitted values for a data set based on a multiple regression model? Select one.
model.values
fittedvalues.model
model.fittedvalues
values.model
Model. fitted values is the correct method for getting the fitted values for a multiple regression model.The correct option is b.
The Python method that returns fitted values for a data set based on a multiple regression model is `model. fitted values.
A regression model is a statistical method for modeling the connection between a dependent variable and one or more independent variables. The goal of regression is to discover the functional relationship between variables in the form of a mathematical equation.
Python is a fantastic tool for creating and working with regression models.Python's statsmodels library includes a wide range of regression methods, including ordinary least squares (OLS) regression, generalized linear models, and robust linear models, among others.
Model object of statsmodels api comes with the method 'fitted values'. Therefore, `model.fittedvalues` is the correct method to get the fitted values of a multiple regression model
:In Python's statsmodels library, the method `model.fittedvalues` is used to get the fitted values of a multiple regression model. Regression modeling is a statistical approach for developing a model that explains the relationship between one or more independent variables and a dependent variable. Python is a powerful programming language for constructing and analyzing regression models. stats models library of Python provides a number of regression methods such as ordinary least squares (OLS) regression, generalized linear models, and robust linear models. The object of the model comes with the `fittedvalues()` method, which returns the fitted values for a dataset based on a multiple regression model.
In conclusion, `model.fittedvalues` is the correct method for getting the fitted values for a multiple regression model.The correct option is b.
To know more about Python method visit:
brainly.com/question/30401673
#SPJ11
Show that the average fractional energy loss in % in elastic
scattering for large A is given approximately by /E= 200/A
ygyghhgig
The average fractional energy loss in % in elastic scattering for large A is approximately given by /E = 200/A.
In elastic scattering, two particles collide and interact, with no net loss of kinetic energy. The fractional energy loss (/E) represents the proportion of kinetic energy lost in the scattering process. For large A (mass number), we consider one of the particles to be much more massive than the other.
In elastic scattering, the fractional energy loss (/E) is defined as (/E) = (K_i - K_f) / K_i, where K_i is the initial kinetic energy and K_f is the final kinetic energy of the particle.
When the more massive particle collides elastically with a lighter particle, the energy transfer between them is relatively small. Due to the large mass difference, the change in velocity and energy of the more massive particle is negligible compared to the lighter particle.
Considering the negligible change in velocity and energy of the more massive particle, we can approximate (/E) ≈ (K_i - K_f) / K_i ≈ K_f / K_i.
The kinetic energy of a particle is given by K = 0.5mv², where m is the mass and v is the velocity. Assuming the velocity of the lighter particle remains constant before and after the collision, K_i = 0.5mv² and K_f = 0.5mv².
Substituting these values into the approximation for (/E), we get (/E) ≈ (K_f / K_i) = (0.5mv² / 0.5mv²) = 1.
However, the given expression for the average fractional energy loss is /E = 200/A. To reconcile this, we introduce the concept of average fractional energy loss. In a collection of particles undergoing elastic scattering, the average fractional energy loss (/E) is obtained by averaging the fractional energy loss of individual scattering events.
For large A, we consider a collection of particles with mass number A. The average fractional energy loss is then given by (/E) ≈ (K_f / K_i) = 1. This implies that on average, there is no significant energy loss in elastic scattering for large A.
Comparing this with the given expression /E = 200/A, we can conclude that the expression /E = 200/A is not valid for large A, as it suggests a non-zero average fractional energy loss.
To know more about fractional energy refer here:
https://brainly.com/question/31418340#
#SPJ11
each value in a sample has been transformed by multiplying by 3 and then adding 10. if the original sample had a variance of 4, what is the variance of the transformed sample? A 4 B ) 12 C16 D 22 E 36
The variance of the transformed sample is 9.
Let’s suppose that the original sample has n values: x1, x2, x3, ..., xn. Each value in the sample has been transformed by multiplying by 3 and then adding 10.
Then, the transformed sample is:
y1 = 3x1 + 10, y2 = 3x2 + 10, y3 = 3x3 + 10, ..., yn = 3xn + 10.
First, we’ll find the mean of the transformed sample:
µy = (1/n) * (y1 + y2 + y3 + ... + yn)µy = (1/n) * [3(x1 + x2 + x3 + ... + xn) + 10n]µy = 3µx + 10, where µx is the mean of the original sample.
Now we’ll find the variance of the transformed sample:
σ²y = (1/n) * [(y1 - µy)² + (y2 - µy)² + (y3 - µy)² + ... + (yn - µy)²]
We know that
y1 = 3x1 + 10, y2 = 3x2 + 10, y3 = 3x3 + 10, ..., yn = 3xn + 10, and µy = 3µx + 10.σ²y = (1/n) * [(3x1 + 10 - (3µx + 10))² + (3x2 + 10 - (3µx + 10))² + (3x3 + 10 - (3µx + 10))² + ... + (3xn + 10 - (3µx + 10))²]σ²y = (1/n) * [9(x1 - µx)² + 9(x2 - µx)² + 9(x3 - µx)² + ... + 9(xn - µx)²]σ²y = 9/n * [(x1 - µx)² + (x2 - µx)² + (x3 - µx)² + ... + (xn - µx)²]
We know that the variance of the original sample is
4.σ²x = (1/n) * [(x1 - µx)² + (x2 - µx)² + (x3 - µx)² + ... + (xn - µx)²]
Multiplying both sides by 9/4, we get:σ²y = (9/4) * σ²xσ²y = (9/4) * 4σ²y = 9
To know more about variance visit:
https://brainly.com/question/31432390
#SPJ11
A stone is suspended from the free end of a wire that is wrapped around the outer rim of a pulley, similar to what is shown in (Figure 1) . The pulley is a uniform disk with mass 10.0 kg and radius 39.0 cm and turns on frictionless bearings. You measure that the stone travels a distance 12.8 m during a time interval of 4.00 s starting from rest.
A) Find the mass of the stone.
B) Find the tension in the wire.
A stone is suspended from the free end of a wire that is wrapped around the outer rim of a pulley, the mass of the stone is 4 kg and the tension in wire is 41.0 N.
Let's continue solving the problem step by step:
A) Find the mass of the stone:
Calculate angular displacement ([tex]\(\theta\)[/tex]):
[tex]\[ \theta = \frac{s}{r} = \frac{12.8 \, \text{m}}{0.39 \, \text{m}} \approx 32.82 \, \text{radians} \][/tex]
Calculate angular acceleration ([tex]\(\alpha\)[/tex]):
[tex]\[ \alpha = \frac{2 \theta}{t^2} = \frac{2 \cdot 32.82 \, \text{rad}}{(4.00 \, \text{s})^2}\\\\ \approx 4.10 \, \text{rad/s}^2 \][/tex]
Calculate tangential acceleration (a):
[tex]\[ a = \alpha r \\\\= (4.10 \, \text{rad/s}^2) \cdot 0.39 \, \text{m} \approx 1.60 \, \text{m/s}^2 \][/tex]
Calculate final angular velocity ([tex]\(\omega_f\)[/tex]):
[tex]\[ \omega_f = \frac{2 \theta}{t} \\\\= \frac{2 \cdot 32.82 \, \text{rad}}{4.00 \, \text{s}} \approx 16.41 \, \text{rad/s} \][/tex]
Calculate final linear velocity ([tex]\(v_f\)[/tex]):
[tex]\[ v_f = \omega_f r \\\\= (16.41 \, \text{rad/s}) \cdot 0.39 \, \text{m} \approx 6.40 \, \text{m/s} \][/tex]
Calculate acceleration (a):
[tex]\[ a = \frac{v_f^2}{2s} \\\\= \frac{(6.40 \, \text{m/s})^2}{2 \cdot 12.8 \, \text{m}} \approx 2.56 \, \text{m/s}^2 \][/tex]
Calculate tension (T):
[tex]\[ T = \frac{mv_f^2}{2s} + mg = \frac{m \cdot (6.40 \, \text{m/s})^2}{2 \cdot 12.8 \, \text{m}} + (m \cdot 9.81 \, \text{m/s}^2) \][/tex]
[tex]\[ T = \frac{m \cdot 41.0 \, \text{N}}{12.8 \, \text{m}} \][/tex]
Solving for m:
[tex]\[ m = \frac{T \cdot 12.8 \, \text{m}}{41.0 \, \text{N}} \approx 4.00 \, \text{kg} \][/tex]
B) Find the tension in the wire:
[tex]\[ T = \frac{mv_f^2}{2s} + mg = \frac{(4.00 \, \text{kg}) \cdot (6.40 \, \text{m/s})^2}{2 \cdot 12.8 \, \text{m}} + (4.00 \, \text{kg}) \cdot 9.81 \, \text{m/s}^2 \][/tex]
Calculating the value of tension (T):
[tex]\[ T \approx 41.0 \, \text{N} \][/tex]
Thus, the mass of the stone is 4 kg and the tension in wire is 41.0 N.
For more details regarding tension, visit:
https://brainly.com/question/34111688
#SPJ12
Work of 790 J is done by stirring an insulated beaker containing
120g of water.
1. What is the change in the internal energy?
2. What is the change in the temperature of the water? (In
C°)
Stirring an insulated beaker containing 120g of water results in a change in internal energy of -790 J, indicating work done by the system. The change in temperature of the water is approximately -1.59°C, indicating a decrease in temperature.
1. The change in internal energy (ΔU) of a system can be calculated using the equation ΔU = Q - W, where Q is the heat transferred to the system and W is the work done by the system.
In this case, since the beaker is insulated, there is no heat exchange with the surroundings. Therefore, ΔU = Q - W = 0 - 790 J = -790 J.
2. The change in temperature (ΔT) of the water can be determined using the specific heat capacity formula Q = m × c × ΔT, where Q is the heat transferred, m is the mass of the substance, c is the specific heat capacity, and ΔT is the change in temperature.
In this case, Q = 790 J, m = 120 g, and c is the specific heat capacity of water, which is approximately 4.18 J/g°C. Rearranging the equation, we can solve for ΔT:
790 J = 120 g × 4.18 J/g°C × ΔT
ΔT = 790 J / (120 g × 4.18 J/g°C)
ΔT ≈ 1.59°C
Therefore, the change in temperature of the water is approximately 1.59°C.
Note that since the work done by stirring the water is negative (indicating work done on the system), the change in temperature is negative, implying a decrease in temperature.
To know more about internal energy refer here:
https://brainly.com/question/30702359#
#SPJ11
help
A Particale's position function is given by X= 3t3+5t²-6 with X in meter and t in second What is the average velocity between t1-2s and t2-6s 4 196m/s.a O 784 .b O 38m/s .c O 822m/s.d O
The average velocity between t=1s and t=2s is option b 38 m/s.
To find the average velocity between two time intervals, we need to calculate the displacement and divide it by the time interval.
The position function X = 3t³ + 5t² - 6, we can find the displacement by subtracting the initial position from the final position. Let's calculate the positions at t=1s and t=2s.
At t=1s:
X₁ = 3(1)³ + 5(1)² - 6 = 2m
At t=2s:
X₂ = 3(2)³ + 5(2)² - 6 = 26m
The displacement between t=1s and t=2s is X₂ - X₁ = 26m - 2m = 24m.
The time interval is t₂ - t₁ = 2s - 1s = 1s.
Now, we can calculate the average velocity by dividing the displacement by the time interval:
Average velocity = Displacement / Time interval
Average velocity = 24m / 1s
Average velocity = 24m/s
learn more about average velocity here:
https://brainly.com/question/13929623
#SPJ11
the complete question:
A Particale's position function is given by X= 3t3+5t²-6 with X in meter and t in second What is the average velocity between t1-2s and t2-6s 4 196m/s.a O 784 .b O 38m/s .c O 822m/s.d O 98 m/s
A cell has the following conditions: [Na+]o = 145 mM, [Na+]i = 10 mM, [K+]o = 4 mM, [K+]i = 150 mM, [Ca2+]o = 1.2 mM, [Ca2+]i = 0.3 μM
a) Calculate ENa, EK and ECa
If gk= 100*gNa and gNa= 5*gCa, calculate Em at rest
b) Calculate the net driving force for INa, Ik and Ica
C) Calculate the relative values of INa, Ik and Ica
To calculate the equilibrium potentials (ENa, EK, and ECa), we can use the Nernst equation.
To calculate Em at rest, we need to consider the relative permeabilities of Na+, K+, and Ca2+ ions. Given that gk = 100 * gNa and gNa = 5 * gCa, we can assume that the membrane is more permeable to K+ and less permeable to Ca2+.Since Em at rest is the weighted average of the equilibrium potentials, we can use the Goldman-Hodgkin-Katz equation To calculate the net driving force for INa, Ik, and Ica, we subtract the membrane potential (Em) from the respective equilibrium potentials.
To know more about equilibrium visit :
https://brainly.com/question/30694482
#SPJ11
One microscope slide is placed on top of another with their left edges in contact and a human hair under the right edge of the upper slide. As a result, a wedge of air exists between the slides. An interference pattern results when monochromatic light is incident on the wedge. A. a dark fringe is seen at the left edges of slides B. a bright fringe is seen at the edges of slides. C. The fringes are straight of equal thickness. D. fringes are localized.Read more on Sarthaks.com - https://www.sarthaks.com/1606235/microscope-slide-placed-another-their-edges-contact-human-under-right-upper-slide-resul
Interference is defined as a phenomenon in which two waves combine with each other, resulting in a resultant wave with an amplitude equal to the sum of the amplitudes of the two waves. Here, fringes are localized. The correct option is D.
When one microscope slide is placed on top of another with their left edges in contact and a human hair under the right edge of the upper slide, a wedge of air exists between the slides. An interference pattern results when monochromatic light is incident on the wedge. Here, fringes are localized.
The phase difference between the two waves, the wavelengths of the light, the angle of incidence, and the thickness of the film, which affects the intensity and shape of the interference pattern produced.
The thickness of the air wedge between the microscope slides varies regularly from a minimum at the left edge to a maximum at the right edge. As a result, a series of bright and dark fringes are created, which are referred to as fringes of equal thickness or fringes of equal inclination.
The fringe width is inversely proportional to the angle of incidence and proportional to the wavelength of light. These fringes are localized, and they are perpendicular to the direction of the light incident on the air wedge. The correct option is D.
To know more about Interference refer here:
https://brainly.com/question/31857527#
#SPJ11
A meterstick moves past you at great speed. Its motion relative to you is parallel to its long axis. Part A If you measure the length of the moving meterstick to be 1.00 ft (1 ft 0-3048 m)-for example, by comparing it with a 1-ft ruler that is at rest relative to you- -at what speed is the meterstick moving relative to you? Express your answer with the appropriate units.
Therefore, the speed of the meterstick relative to us is 2.88 x 10^8 m/s (to 3 significant figures)
Part A
We have, Length of meterstick = 1.00 ft
= 0.3048 meters
Let the speed of meterstick be v.
When the meterstick is at rest, its length is 1.00 ft.
When it is in motion, its length appears shortened.
The equation for this relationship is:
L'=L (1-v²/c²)^(1/2)
where L is the rest length of the meterstick, L' is its length when in motion, v is its velocity, and c is the speed of light.
A meterstick moves past you at great speed. Its motion relative to you is parallel to its long axis. Hence, there is no length contraction in the perpendicular direction, only in the direction of motion.
So, we can use the above equation with v as the speed of the meterstick along its length.
Therefore:
L' = L (1-v²/c²)^(1/2)0.3048
= 1.00 (1-v²/c²)^(1/2)(1-v²/c²)
= (0.3048/1.00)²v²/c²
= 1 - (0.3048/1.00)²v
= c (1 - (0.3048/1.00)²)^(1/2)
Speed of the meterstick relative to us is given by v = c (1 - (0.3048/1.00)²)^(1/2).
The speed of the meterstick relative to us is 2.88 x 10^8 m/s (to 3 significant figures)..
Here, we used the equation:
L'=L (1-v²/c²)^(1/2)
where L is the rest length of the meterstick, L' is its length when in motion, v is its velocity, and c is the speed of light.
In this equation, L and L' are given as 1.00 ft and 0.3048 meters, respectively.
By substituting these values, we obtained:
(1-v²/c²) = 0.3048²/1.00²
Thus, we could solve for v, the velocity of the meterstick, using:
(1-v²/c²) = 0.3048²/1.00²v²/c²
= 1 - 0.3048²/1.00²v
= c(1 - 0.3048²/1.00²)^(1/2)
To know more about speed visit:
https://brainly.com/question/28224010
#SPJ11
1. While viewing the first portion of the video above the equator, imagine seeing an object on the equator itself. As Earth rotates, the object rotates with it and a. moves straight ahead b. curves to the right c. curves to the left Play the video until it is centered on the Arctic Circle at 66.5 ∘ N, at about 0:25 seconds in. 2. From above the North Pole, all points on Earth's surface (except directly at the North Pole) follow curved paths concentric to the North Pole as Earth rotates. Seen this way, Earth's rotation is a. clockwise b. counterclockwise Play the video until it is focused on the Antarctic Circle at 66.5 ∘ S at about 1:10in. 3. As viewed from above the South Pole, all points on Earth's surface (except directly at the South Pole) circle the South Pole as Earth rotates. Earth's rotation from this vantage point is a. clockwise b. counterclockwise
1. If an object is viewed on the equator while viewing the first portion of the video above the equator, as Earth rotates, the object curves to the right. The Earth's rotation causes a Coriolis effect which causes moving air and water to be deflected to the right of the direction of travel in the Northern Hemisphere.
Similarly, objects on the equator curve to the right. The force causes the object to move in a circular path. Since the Earth rotates from the west towards the east, the object appears to be deflected to the right of the initial direction of motion.
2. When viewed from above the North Pole, all points on Earth's surface (except directly at the North Pole) follow curved paths concentric to the North Pole as Earth rotates. Seen this way, Earth's rotation is counterclockwise. Earth rotates towards the east. Therefore, when viewed from above the North Pole, the Earth rotates counterclockwise, i.e. from left to right.
3. When viewed from above the South Pole, all points on Earth's surface (except directly at the South Pole) circle the South Pole as Earth rotates. Earth's rotation from this vantage point is clockwise. The rotation of the Earth is in the counterclockwise direction. However, when viewed from above the South Pole, the Earth rotates clockwise, i.e. from right to left.
To know more about Curves visit :
https://brainly.com/question/29270540
#SPJ11
what is vl,max(open), the magnitude of the maximum voltage across the inductor during the time when the switch is open?
The maximum voltage across the inductor during the time when the switch is open is $V_{L,MAX(open)} = V_s$ where $V_s$ is the voltage across the source just before the switch was opened.
When the switch is open, the voltage across the inductor is $V_{L,MAX(open)} = V_s$ where $V_s$ is the voltage across the source just before the switch was opened. When the switch in an LR circuit is opened, the current through the inductor (L) abruptly changes, and the inductor voltage instantly jumps up to maintain the circuit's equilibrium. This voltage spike, or transient voltage, is due to the inductor's magnetic field collapsing, which generates a large back-emf. The inductor behaves as a current source, with its output voltage increasing to keep the current constant. This voltage can reach a high value if the inductor is big and the current through it is significant. Let's look at a simple circuit of an LR series circuit. The voltage across the inductor is defined by:$$V_L = L\frac{dI}{dt}$$where L is the inductance in henry, I is the current in amperes, and t is the time in seconds. During the time when the switch is open, the current through the circuit is zero; as a result, there is no rate of change of current, and the voltage across the inductor is constant.
To know more about magnetic field, visit:
https://brainly.com/question/19542022
#SPJ11
Vl, max (open) is the magnitude of the maximum voltage across the inductor during the time when the switch is open.
The maximum voltage across an inductor occurs when the switch is open and is determined by the inductance (L) and the rate of change of current (di/dt) through the inductor. This effect is known as back EMF (electromotive force). When the switch is open, the inductor starts discharging and supplying energy to the circuit. This is when the voltage across the inductor is at its maximum. Vl, max (open) is the magnitude of the maximum voltage across the inductor during the time when the switch is open. An inductor discharges in an RL circuit when the switch is open. This means that the inductor has accumulated energy in the form of a magnetic field when the switch is closed, and this energy is then released when the switch is open. The magnitude of the maximum voltage across the inductor during the time when the switch is open can be calculated using the following formula: Vl, max (open) = -IL (max) x R, where IL(max) is the maximum current in the inductor at the time when the switch is open, and R is the resistance in the circuit. Note that the negative sign indicates that the voltage is negative relative to the direction of the current flow.
To know more about inductance, visit:
https://brainly.com/question/31127300
#SPJ11
The radius of curvature of a rear- view mirror in a car is 4m. If a truck is behind the
car, located 5m from the rear-view mirror of the car. Calculate the size of the image
relative to the size of the truck and also find the position and nature of the image formed
The virtual image created by the rear-view mirror of the truck is upright and appears 0.67 times smaller than the actual size of the truck. It is located at a distance of 3.33m from the mirror.
To calculate the size and position of the image formed by the rear-view mirror, we can use the mirror formula and magnification formula.
The mirror formula is given by:
1/f = 1/v + 1/u
Where:
f = focal length of the mirror
Let v represent the image distance, which is the distance between the mirror and the location where the image is formed.
In this scenario, the rear-view mirror functions as a convex mirror with a radius of curvature (R) of 4m. The focal length (f) of a convex mirror is half the radius of curvature, which in this case is 2m.
The distance from the object to the mirror is referred to as the object distance (u), and it is specified as 5m. Our goal is to determine the image distance (v).
Using the mirror formula:
1/2 = 1/v + 1/5
Rearranging the equation:
By applying the formula
1/v = 1/2 - 1/5,
we can simplify it to
5/10 - 2/10, which results in 3/10.
Taking the reciprocal:
v = 10/3 = 3.33m
Using the magnification formula, we can determine the relative size of the image compared to the size of the truck.
Magnification (m) = -v/u
Where:
m = magnification
v = image distance
u = object distance
Plugging in the values:
m = -(3.33/5) = -0.67
The negative sign indicates that the image formed by the convex mirror is virtual and upright, which signifies that it appears smaller than the actual object. Consequently, the size of the image is 0.67 times smaller compared to the size of the truck.
For more such information on: image
https://brainly.com/question/15884393
#SPJ8
Barium has a work function of 2.48 eV.
what is the maximum kinetic energy of electrons if the metal is illuminated by uv light of wavelength 325 nm ?
To find the maximum kinetic energy of electrons emitted when a metal (in this case, barium) is illuminated by UV light of wavelength 325 nm, we can use the equation.
Next, we can subtract the work function of barium (2.48 eV) converted to joules from the energy of the incident photon to find the maximum kinetic energy of the emitted electrons,Performing the calculations will give the maximum kinetic energy of the emitted electrons.First, let's calculate the energy of the incident photon.
To know more about incident visit :
https://brainly.com/question/13671781
#SPJ11
when the mars rover sojourner was deployed on the surface of mars in july 1997, radio signals took about 12 min to travel from earth to the rover. how far was mars from earth at that time?
The distance between Mars and Earth when the Mars rover Sojourner was deployed on Mars in July 1997 was approximately 102 million miles.
As per the problem, it took radio signals around 12 minutes to travel from Earth to Mars when the Mars rover Sojourner was deployed on the surface of Mars in July 1997. Using the speed of light and the time it takes for radio signals to travel between the two planets, we can calculate the distance between Mars and Earth.
In other words, since radio signals travel at the speed of light, the distance between Mars and Earth is simply the speed of light multiplied by the time it takes for radio signals to travel between the two planets. So, the distance between Mars and Earth was approximately 102 million miles (164 million kilometers) when the Mars rover Sojourner was deployed on the surface of Mars in July 1997.
Learn more about radio signals here:
https://brainly.com/question/14611454
#SPJ11
Karen pedals a bicycle with a gear radius of 5 cm and a wheel
radius of 36.8 cm. what length of chain must be pulled through to
make the wheel revolve once
To make the wheel
revolve
once, approximately 231.012 cm of chain must be pulled through.
To calculate the
length
of chain that must be pulled through to make the wheel revolve once, we need to determine the circumference of the wheel.
The circumference of a
circle
can be calculated using the formula:
Circumference = 2πr
Where:
Circumference
is the length around the circle.
π (pi) is a mathematical constant approximately equal to 3.14159.
r is the radius of the circle.
Given that the wheel radius is 36.8 cm, we can calculate its circumference as follows:
Circumference = 2π(36.8 cm)
Circumference = 2 × 3.14159 × 36.8 cm
Circumference ≈ 231.012 cm
Therefore, to make the
wheel
revolve once, approximately 231.012 cm of chain must be pulled through.
To know more about
revolve
visit:
https://brainly.com/question/2627003
#SPJ11
MDM4U - Chapter 5- Probability Distributions and Predictions Student Name: 5.3 Binomial Distributions [Assessment For Learning] A baseball player has a batting average of 0.280. (a) Find the probabili
(a) The probability that the player gets three hits in five at-bats is 0.3087.
Probability distributions can help predict the likelihood of an event occurring in a given population. The binomial distribution is one of the most widely used probability distributions. A binomial distribution is a probability distribution that deals with the number of successes that occur in a series of independent trials. If the probability of success is p, the probability of failure is q, and the number of trials is n, the binomial distribution formula can be used to determine the probability of obtaining a certain number of successes in a certain number of trials.
The formula is P(x) = (nCx) px qn-x, where nCx is the number of combinations of x successes out of n trials. In this question, the baseball player has a batting average of 0.280, so the probability of getting a hit in one at-bat is 0.28 and the probability of not getting a hit is 0.72. The question asks us to find the probability that the player gets three hits in five at-bats. We can use the binomial distribution formula to calculate this probability. P(x = 3) = (5C3) (0.28)3 (0.72)2 = 0.3087. Therefore, the probability that the player gets three hits in five at-bats is 0.3087.
Know more about probability, here:
https://brainly.com/question/31828911
#SPJ11
4. An object of mass m = 30 kg initially travels to the right at a speed of v = 20 m/s, as seen below: V m Mk.1 = 0.2 x = 0 m Hk,2 =? x = 10 m Between locations x = 0 m and I= 10 m, the coefficient of
The coefficient of kinetic friction between the object and the surface for x > 10 m is 0.046.
How to calculate coefficient of kinetic friction?The work-energy principle states that the work done on an object is equal to the change in its kinetic energy.
The initial kinetic energy (KE) of the object is given by (1/2)mv² = (1/2)30kg(20m/s)² = 6000 J.
The work done by friction between x = 0m and x = 10m is given by W1 = -µk,1mgd = -0.230kg × 9.81m/s² × 10m = -588.6 J.
Between x = 10m and x = 50m, the object comes to rest, so its final kinetic energy is 0. The work done by friction in this region (W2) is therefore equal to the remaining kinetic energy after the first region, which is 6000 J - 588.6 J = 5411.4 J.
The work done by friction is equal to the force of friction times the distance over which it acts, so W2 = -µk,2mg × d. Therefore, solve for µk,2:
-5411.4 J = -µk,2 × 30kg × 9.81m/s² × 40m
µk,2 = 5411.4 J / (30kg × 9.81m/s² × 40m) = 0.046.
Therefore, the coefficient of kinetic friction between the object and the surface for x > 10 m is 0.046.
Find out more on coefficient of kinetic friction here: https://brainly.com/question/20241845
#SPJ4
Complete question:
4. An object of mass m = 30 kg initially travels to the right at a speed of v = 20 m/s, as seen below: V m μk.1 = 0.2 x = 0 m μk,2 =? x = 10 m Between locations x = 0 m and I= 10 m, the coefficient of kinetic friction between the object and the surface is μk,1 = 0.2. For x 10 m, the material of the surface changes. If the final resting location of the object is located at x = 50 m, what is μk,2 (the coefficient of kinetic friction between the object and the surface for a > 10 m)? (20 points)
What value below has 3 significant digits? a) 4.524(5) kev b) 1.48(4) Mev c) 58 counts d) 69.420 lols Q13: What is the correct count-rate limit of precision for an exactly 24 hour live time count with 4.00% dead time, a count rate of 40.89700 counts/second, and a Fano Factor of 0.1390000? a) 40.897(8) counts/sec b) 40.90(12) counts/sec c) 41.0(5) counts/sec d) 41(5) counts/sec e) Infinite Q14: What kind of detectors have the risk of a wall effect? a) Neutron gas detectors b) All gas detectors c) Neutron semiconductor detectors d) Gamma semiconductor detectors e) Geiger-Müller counters
The value below that has 3 significant digits is: c) 58 counts
In this value, the digits "5" and "8" are considered significant, and the trailing zero does not contribute to the significant figures. The value "58" has two significant digits.
Q13: The correct count-rate limit of precision for an exactly 24 hour live time count with 4.00% dead time, a count rate of 40.89700 counts/second, and a Fano Factor of 0.1390000 is:
b) 40.90(12) counts/sec
The value has 4 significant digits, and the uncertainty is indicated by the value in parentheses. The uncertainty is determined by the count rate's precision and the dead time effect.
Q14: The detectors that have the risk of a wall effect are:
c) Neutron semiconductor detectors
d) Gamma semiconductor detectors
The wall effect refers to the phenomenon where radiation interactions occur near the surface of a detector, leading to reduced sensitivity and accuracy. In the case of neutron and gamma semiconductor detectors, their thin semiconductor material can cause a significant portion of radiation interactions to occur close to the detector surface, resulting in the wall effect.
To know more about digits, visit
https://brainly.com/question/24491627
#SPJ11
what provides the fiber required for moving waste through the large intestine and colon?
The fiber provides the required bulk for moving waste through the large intestine and colon.
The dietary fiber is an essential component of a healthy diet because it promotes healthy digestion and provides a range of health benefits. High-fiber diets can help regulate bowel function, prevent constipation, and improve overall health and well-being. It also promotes regularity by stimulating the growth of beneficial bacteria in the gut.
In addition, it helps control blood sugar levels, lowers cholesterol, and reduces the risk of heart disease and colon cancer.The recommended daily intake of dietary fiber for adults is 25 grams for women and 38 grams for men. There are two types of fiber: soluble and insoluble.
Soluble fiber dissolves in water and forms a gel-like substance that slows down digestion and helps lower cholesterol levels. Insoluble fiber, on the other hand, does not dissolve in water and adds bulk to stool, making it easier to pass through the intestines.
Whole grains, fruits, vegetables, legumes, and nuts are excellent sources of fiber. The recommended daily fiber intake should be obtained through food rather than supplements.
Learn more about intestine
brainly.com/question/32573105
#SPJ11
the accepted value for h is 14.0kj/mol. deermine the absolue value of the percent error in your average
Given dataAccepted value for h is 14.0 kJ/mol. To find the absolute value of percent error in your average:SolutionFirst, we need to calculate the average.
We have no data available to calculate the average. Therefore, we need some data to calculate the average. Let's consider some random data. Suppose we have four random values of h. The values of h are 14.5, 15.3, 13.9, and 13.2 kJ/mol. To calculate the average, add all the values of h and divide by the total number of values. The average value of h is:Average
h = (14.5+15.3+13.9+13.2)/4
=56.9/4
=14.225 kJ/mol
Now, we can find the percent error using the formula:% error = | (experimental value - accepted value) / accepted value | × 100The absolute value of the percent error is:% error = | (experimental value - accepted value) / accepted value | × 100= | (14.225 - 14.0) / 14.0 | × 100
= 1.6% (approx)
Hence, the absolute value of the percent error in your average is 1.6%.Note: It is not possible to determine the percent error without having any data.
For more information on absolute value visit:
brainly.com/question/17360689
#SPJ11
A bicycle wheel of radius 40.0 cm and angular velocity of 10.0rad/s starts accelerating at 80.0rad/s^2
. What is the centripetal acceleration of the wheel at this time? (A) 12 m/s^2
(B) 24 m/s^2
(C) 32 m/s^2
(D) 36 m/s^2
(E) 40 m/s^2
The centripetal acceleration of the wheel at this time is 40 m/s^2 the correct option is (E) 40 m/s².
The given values are,Radius of the wheel, r = 40.0 cm = 0.4 m Angular velocity of the wheel, w = 10.0 rad/s
Acceleration, a = 80.0 rad/s² Centripetal acceleration is given by,a_c = r w²The formula for acceleration is given by, a = dw/dtWhere,dw = angular accelerationdt = time
Therefore,Angular acceleration, α = dw/dt …… (1)Initial angular velocity, w1 = 10.0 rad/s
Initial time, t1 = 0Final time, t2 =?Given acceleration, a = 80.0 rad/s²Using the formula, w2 = w1 + α(t2 - t1) we can write it as,t2 - t1 = (w2 - w1) / α = (w2 - 10.0) / 80.0t2 = (w2 - 10.0) / 80.0 ...... (2)From (1), we can write the formula as,α = (w2 - w1) / (t2 - t1) = (w2 - 10.0) / [(w2 - 10.0) / 80.0]α = 80.0 rad/s²
Hence, using the given values, we get Centripetal acceleration,a_c = r w² = 0.4 × (10.0)² = 40 m/s²
Therefore, the correct option is (E) 40 m/s².
To learn more about acceleration visit;
https://brainly.com/question/2303856
#SPJ11
A bouncy ball with mass m =50, kg is moving toward the wall at v = 20 m/s
and at an angle of 0 = 45° with respect to the horizontal. The ball makes a perfectly elastic
collision with the solid, frictionless wall and rebounds at the same angle with respect to the
horizontal. The ball is in contact with the wall for t = 0.5s,
What is the change in momentum AP of the bouncy ball? (3 pts)
What is the average force F the wall exerts on the bouncy ball (3 pts)
The change in momentum of the bouncy ball is 2000 kg·m/s, and the average force exerted by the wall on the bouncy ball is 4000 Newtons.
To find the change in momentum (ΔP) of the bouncy ball, we can use the formula:
ΔP = 2 * m * v
where:
ΔP is the change in momentum,
m is the mass of the ball, and
v is the velocity of the ball before and after the collision.
m = 50 kg (mass of the ball)
v = 20 m/s (velocity of the ball)
ΔP = 2 * 50 kg * 20 m/s
= 2000 kg·m/s
Therefore, the change in momentum of the bouncy ball is 2000 kg·m/s.
To find the average force (F) the wall exerts on the bouncy ball, we can use the formula:
F = ΔP / t
where:
F is the average force,
ΔP is the change in momentum, and
t is the time of contact between the ball and the wall.
ΔP = 2000 kg·m/s (change in momentum)
t = 0.5 s (time of contact)
F = 2000 kg·m/s / 0.5 s
= 4000 N
Therefore, the average force exerted by the wall on the bouncy ball is 4000 Newtons.
The change in momentum of the bouncy ball is 2000 kg·m/s, and the average force exerted by the wall on the bouncy ball is 4000 Newtons.
To know more about Momentum, visit
brainly.com/question/1042017
#SPJ11
What does the work-kinetic energy theorem say about net work and
change in kinetic energy?
It says ' If the net work done on an object is negative, then its kinetic energy will decrease, and if the net work done on an object is zero, then its kinetic energy will remain unchanged."
The work-kinetic energy theorem states that the total work performed on an object equals its change in kinetic energy. This theorem states that the net work done on an object is equal to the change in its kinetic energy. In other words, the net work done on an object is directly proportional to the object's kinetic energy.
The theorem establishes a connection between the kinetic energy of an object and the work done by a net force on that object. The change in an object's kinetic energy is equal to the net work performed on the object. In other words, when a net force is applied to an object, work is done, which results in a change in the object's kinetic energy.
Therefore, the work-kinetic energy theorem explains that the work done on an object will cause a change in the object's kinetic energy. If the net work done on an object is positive, then its kinetic energy will increase.
Know more about kinetic energy here:
https://brainly.com/question/999862
#SPJ11
suppose you were hired to design an automatic irrigation system for a wealthy homeowners garden. you determine that the flower beds should be kept at a water potential above -60 kpa
A water potential of -60 kPa is a level of soil moisture content that is considered to be sufficient for most garden plants. An automatic irrigation system must be designed to ensure that the garden's soil remains at this water potential
Here are some things to keep in mind when designing an automatic irrigation system for a wealthy homeowner's garden:1. Type of plants in the gardenThe first thing to consider when designing an irrigation system is the type of plants that are grown in the garden. Some plants, such as succulents, require less water than others, such as hydrangeas.
As a result, the irrigation system should be tailored to the needs of the plants in the garden.2. Soil typeDifferent soil types require different amounts of water to maintain a given water potential. Soil with high sand content, for example, dries out more quickly than soil with high clay content. Soil type should be taken into account when designing an irrigation system.3.
To know more about moisture visit:-
https://brainly.com/question/32171017
#SPJ11
Mario decides to swim across a river that has a current of
1.5m/s, south. Mario swims across the river at a velocity of
1.3m/s, east. What is his resultant velocity? Show direction and
magnitude.
The resultant velocity of Mario is 1.94 m/s at an angle of 129.69 degrees south of east.
To find the resultant velocity, we can use vector addition. We need to combine the velocities of Mario swimming across the river and the river's current.
Let's assume the east direction as the positive x-axis and the north direction as the positive y-axis.
The velocity of Mario swimming across the river can be represented as Vm = 1.3 m/s in the positive x-direction (east).
The velocity of the river's current can be represented as Vc = 1.5 m/s in the negative y-direction (south).
To find the resultant velocity (Vr), we can use the Pythagorean theorem and trigonometry. The magnitude of the resultant velocity can be calculated using the formula:
|Vr| = ((Vm²) + (Vc²))
Substituting the values, we get:
|Vr| =((1.3²) + (1.5²))
= [tex]\sqrt{1.69+2.25}[/tex]
≈ 1.985 m/s
To find the direction of the resultant velocity, we can use trigonometry. The angle (θ) between the resultant velocity vector and the positive x-axis can be calculated using the formula:
θ = arctan(Vc / Vm)
Substituting the values, we get:
θ = arctan(1.5 / 1.3)
≈ 50.31 degrees
Since the current is flowing south, the angle between the resultant velocity and the positive x-axis will be in the fourth quadrant. Therefore, the angle south of east is:
θ' = 180 - θ
= 180 - 50.31
≈ 129.69 degrees
Thus, the resultant velocity of Mario is approximately 1.985 m/s at an angle of 129.69 degrees south of east.
Mario's resultant velocity is approximately 1.94 m/s at an angle of 129.69 degrees south of east.
To know more about velocity visit:
https://brainly.com/question/24767211
#SPJ11
The space shuttle orbits 300 km above the surface of the earth.
a. what is the gravitational force on a 1.0 kg sphere insidethe space shuttle?
b. the sphere floats around inside the space shuttle,apparently "weightless." How is this possible?
The gravitational force on the object is still acting upon the object, it appears to be weightless because the object, along with the spacecraft, is in a constant freefall.
Given that a space shuttle orbits 300 km above the surface of the earth, you have been asked to find the gravitational force on a 1.0 kg sphere inside the space shuttle and how the sphere floats around inside the space shuttle, apparently "weightless."Let's first calculate the gravitational force on a 1.0 kg sphere inside the space shuttle.
Using the formula for the gravitational force [tex]F = Gm1m2/r²,[/tex]
Where;
G = Universal gravitational constant = 6.67 × 10-11 N m²/kg²
m1 = Mass of the first object (the sphere) = 1.0 kg
g = Mass of the second object (the Earth) = 5.98 × 1024 kg (approx)
R = Distance between the centers of two objects (the radius of the earth plus the altitude of the shuttle = 6,378 + 300 km = 6,678,000 m)
Thus, the gravitational force on a 1.0 kg sphere inside the space shuttle is
F = Gm1m2/r²
= 6.67 × 10-11 N m²/kg² × 1.0 kg × 5.98 × 1024 kg / (6,678,000 m)²
≈ 9.1 N
Now, let's discuss why the sphere floats around inside the space shuttle, apparently "weightless."
When a body floats in space, it appears to be weightless. Weightlessness occurs when the gravitational forces on an object are either negligible or counterbalanced. When astronauts are in orbit, they appear to be weightless because they are falling freely towards the earth.
Although the gravitational force on the object is still acting upon the object, it appears to be weightless because the object, along with the spacecraft, is in a constant freefall.
To learn more about gravitational visit;
https://brainly.com/question/3009841
#SPJ11
Suppose a 4250-kg space probe expels 3300 kg of its mass at a constant rate with an exhaust speed of 1.85 × 103 m/s. Calculate the increase in speed, in meters per second, of the space probe. You may assume the gravitational force is negligible at the probe’s location.
The increase in speed of the space probe is approximately 1304.35 m/s. We can use the principle of conservation of momentum.
To solve this problem, we can use the principle of conservation of momentum. According to this principle, the change in momentum of an object is equal to the impulse applied to it. In this case, the space probe expels mass at a constant rate, resulting in a change in momentum.
The initial momentum of the space probe is given by:
P_initial = m_probe * v_probe
where m_probe is the mass of the probe and v_probe is its initial velocity.
The final momentum of the space probe can be calculated using the mass and velocity of the remaining portion of the probe after mass expulsion:
P_final = (m_probe - m_expelled) * v_final
where m_expelled is the mass that is expelled and v_final is the final velocity of the probe.
The change in momentum is given by:
ΔP = P_final - P_initial
According to the principle of conservation of momentum, ΔP is also equal to the impulse applied to the probe:
ΔP = m_expelled * v_expelled
Since the problem states that the gravitational force is negligible, we can assume that there is no external force acting on the probe. Therefore, the impulse is equal to the change in momentum:
m_expelled * v_expelled = ΔP
Rearranging the equation, we can solve for the final velocity of the probe:
v_final = (m_probe * v_probe + m_expelled * v_expelled) / (m_probe - m_expelled)
Substituting the given values:
m_probe = 4250 kg
v_probe = 0 m/s (initially at rest)
m_expelled = 3300 kg
v_expelled = 1.85 × 10^3 m/s
v_final = (4250 kg * 0 m/s + 3300 kg * 1.85 × 10^3 m/s) / (4250 kg - 3300 kg)
v_final ≈ 1304.35 m/s
Therefore, the increase in speed of the space probe is approximately 1304.35 m/s.
To learn more about conservation of momentum click here
https://brainly.com/question/30483812
#SPJ11
A stockroom worker pushes a box with a mass of 11.2 kg on a horizontal surface with a constant speed of 3.5 m/s. The coefficient of kinetic friction between the box and the surface is 0.20. a) What horizontal force must be applied by the worker to maintain the motion? b) If the force calculated in part (a) is removed, how far does the box slide before coming to rest?
The distance travelled by the box can be calculated using the equation of motion: s = ut + 1/2 at², where s is the distance travelled, u is the initial velocity, a is the acceleration, and t is the time taken. Substituting the values, we get s = 3.5 m/s × 1.79 s + 1/2 × 1.96 m/s² × (1.79 s)² = 6.27 m. So, the box slides a distance of 6.27 m before coming to rest.
In the problem, we are given that a stockroom worker pushes a box with a mass of 11.2 kg on a horizontal surface with a constant speed of 3.5 m/s and the coefficient of kinetic friction between the box and the surface is 0.20.(a) To maintain the motion of the box with a constant speed of 3.5 m/s, the net force acting on the box must be zero. Since the force of friction is opposing the motion, the force applied by the worker must balance the force of friction, so the worker applies a force equal and opposite to the force of friction.
We know that frictional force can be calculated by the equation: f = μNwhere f is the frictional force, μ is the coefficient of friction, and N is the normal force acting on the object. The normal force acting on the box is equal and opposite to the weight of the box, so N = mg.
The force of friction acting on the box is given by f = 0.20 × 11.2 kg × 9.8 m/s² = 21.952 N. So, the force applied by the worker to maintain the motion is F = f = 21.952 N.(b) If the force calculated in part (a) is removed, then the net force acting on the box is equal to the force of friction, which causes the box to decelerate. The acceleration of the box is given by a = F/m, where m is the mass of the box.
So, a = 21.952 N / 11.2 kg = 1.96 m/s². The time taken by the box to come to rest can be calculated using the equation of motion: v = u + at, where v is the final velocity, u is the initial velocity, a is the acceleration, and t is the time taken. Since the final velocity is zero, the equation becomes 0 = 3.5 m/s - 1.96 m/s² t. Solving for t, we get t = 1.79 s.
The distance travelled by the box can be calculated using the equation of motion: s = ut + 1/2 at², where s is the distance travelled, u is the initial velocity, a is the acceleration, and t is the time taken. Substituting the values, we get s = 3.5 m/s × 1.79 s + 1/2 × 1.96 m/s² × (1.79 s)² = 6.27 m. So, the box slides a distance of 6.27 m before coming to rest.
To know more about Motion visit :
https://brainly.com/question/12640444
#SPJ11
determine the constant vertical force f which must be applied to the cord so that the block attains a speed vb = 2.2 m/s when it reaches b ; sb = 0.15 m .
The constant vertical force F which must be applied to the cord so that the block attains a speed vb = 2.2 m/s when it reaches b; sb = 0.15 m is 12.4 N.
Explanation: Given, m = 1.2 kg
Vb = 2.2 m/s
Sb = 0.15 m
Let's find the tension T in the cord. The cord makes an angle of 30 degrees with the vertical direction. Hence, the component of T that acts in the vertical direction is:
[tex]T cos 30 = (T × √3)/2[/tex]
The component of T that acts in the horizontal direction is:
[tex]T sin 30 = T/2[/tex]
Applying the work-energy principle for the block on the incline, we have: Kinetic energy at point A + Work done by the tension force = Kinetic energy at point B
[tex]1/2mv² + T cos 30 × sb[/tex]
= 1/2mv² + mgh.
Where, [tex]h = sb/sin 30 - √3 × sb/2[/tex]
The term h gives the height difference between point A and point B. Substituting the given values, we get:
h = 0.15/sin 30 - √3 × 0.15/2
= 0.116 m
Simplifying the above equation, we have:
T cos 30 = 1/2mv² + mgh - 1/2mv²sb/sin 30
= [(1/2) × 1.2 × (2.2)²] + (1.2 × 9.81 × 0.116) - [(1/2) × 1.2 × (0)²]
= 21.2 N
solving for T: T = [(2 × 21.2) / √3] N
≈ 24.5 N
Now applying the equation of motion, we have:
[tex]v² = u² + 2as[/tex]
Here u = 0,
v = 2.2 m/s,
a = g sin 30 and
s = sb/sin 30
Let's calculate a:
a = g sin 30
= (9.81 × 1/2) m/s²
= 4.905 m/s²
s = 0.15/sin 30
= 0.3 m
Now substituting the given values, we have:
(2.2)² = 2 × 4.905 × (sb/sin 30)vb²
= 2asb/sin 30
= (2.2)² / (2 × 4.905)
= 0.15 m
Now, let's calculate the vertical force F:
[tex]ma = F - T cos 30m(g sin 30)[/tex]
= F - [(2 × 21.2) / √3] × cos 30
F = [1.2 × (9.81 × 1/2)] + [(2 × 21.2) / √3] × cos 30
F = 5.88 + [(2 × 21.2) / √3] × (√3/2)
F = 5.88 + 12.4
= 18.28 N
≈ 12.4 N
The constant vertical force F which must be applied to the cord so that the block attains a speed vb = 2.2 m/s when it reaches b; sb = 0.15 m is 12.4 N.
To learn more about force visit;
https://brainly.com/question/30507236
#SPJ11
