At rms voltage ([tex]V_{rms}[/tex]) = 39.59V resistor will dissipate 14.0W.
The term "alternating current" (AC) describes a current in which the voltage and current both take the shape of sinusoidal waves. Root mean square value is indicated by the letter "rms." Both the mean voltage and mean current of an alternating circuit are represented by it.
Also, power dissipated is
P = [tex]V^{2} _{rms}[/tex] / R
2 = [tex]15^{2}[/tex] / R
2 = [tex]\frac{225}{R}[/tex]
R = 112Ω
If P = 14 W,
[tex]V^{2} _{rms}[/tex] = PR
[tex]V^{2} _{rms}[/tex] = 14×112
[tex]V^{2} _{rms}[/tex] = √1568 = 39.59V
Therefore, at rms voltage ([tex]V_{rms}[/tex]) = 39.59V resistor will dissipate 14.0W.
Learn more about rms voltage ([tex]V_{rms}[/tex]) here:
https://brainly.com/question/13507291
#SPJ4
What is the wavelength of maximum intensity and the total energy emitted by a celestial object at absolute zero?
Wavelength is Infinity
What is Wavelength?
A waveform signal that is carried in space or down a wire has a wavelength, which is the separation between two identical places (adjacent crests) in the consecutive cycles. This length is often defined in wireless systems in metres(m), centimetres(cm), or millimetres(mm).
A blackbody never approaches zero, hence the wavelength of the highest intensity that a heavenly object may produce is infinite. As a celestial object's temperature rises, its overall energy output increases quickly.
to know more go to - https://brainly.com/question/9741568
#SPJ4
Why is there an error between the calculated values of r and the nominal value of r?.
The nominal value is based on experimental results whereas this model is likely based on the ideal gas law, which real gasses don't follow precisely.
What is nominal value?In economics, nominal values guide the unadjusted rate or current price, without taking inflation or other elements into account as opposed to real discounts, where adjustments are made for available price level changes over the period.The nominal price of a guarantee is its stated value, its saving price, or its unadjusted price, without taking into account inflation and other elements. The real value of a guarantee is its market value or a modified price that accounts for price level transitions that have occurred over a period.In economics, the nominal significance is the unadjusted value of an asset without carrying into account deductions and compensations, such as expenses, taxes, and inflation. It is the difference between the real value of an asset, which contemplates deductions and premiums.To learn more about nominal value, refer to:
https://brainly.com/question/3837338
#SPJ4
A car starts from rest and constantly accelerates at a rate of 10 [m/s2 ] during a 402 [m] race. how fast is the car going at the finish line?
A car starts from rest and constantly accelerates at a rate of 10 [m/s2 ] during a 402 [m] race. At the finish line, the speed of the car is [tex]\mathbf{89}.\mathbf{6660}\ \mathbit{m}/\mathbit{s}[/tex].
The initial velocity of the car [tex]u = 0[/tex]
Constant acceleration [tex]a = 10~ m/s^2[/tex]
Distance of the Race [tex]d = 402~ m[/tex]
The car is accelerating with a constant acceleration [tex]a[/tex] , so the car's velocity will change with time as it approaches the finish point which is at a distance [tex]d[/tex] from the initial point.
Newton's equation is the backbone of Classical Mechanics. Let's say the velocity of the car at the finish line is [tex]v[/tex]. We know that displacement is the product of average velocity and time.
Or [tex]s=\frac{u+v}{2}\times t[/tex]
Using Newton’s first equation [tex]v\ =\ u\ +\ at[/tex]
Newton's equation of motion turns out to be,
[tex]v^2 = u^2+2ad[/tex]
[tex]v^2 = 2\times 10 \times 402[/tex]
so, [tex]v = \sqrt{8040} = 89.6667 ~m/s[/tex]
For more about Newton’s equation of motion, visit: https://brainly.com/question/25951773
Although most astronomers assume dark matter really exists, there is at least one other possible explanation for the phenomena attributed to dark matter. What is it?.
Although most astronomers assume dark matter really exists, there is at least one other possible explanation for the phenomena attributed to dark matter. What is it?
It's possible that our understanding of how gravity behaves on galaxy-scales is inaccurate or lacking in some way.
What is dark matter in space?We surmise that dark matter exists based on its gravitational pull on visible matter. In order to rule out the idea that our comprehension of gravity is leading us to incorrectly infer the presence of dark matter, the majority of scientists believe it to be extremely unlikely that there is a problem with our knowledge of gravity. As long as it is too faint for us to perceive beyond the halo of our galaxy, astronomers regard dark matter to be "dark." If a human were to be hurled into the halo of our galaxy, they might end up being dark matter. An estimated 85% of the universe's mass is assumed to be made up of dark matter, a hypothetical type of stuff. Dark matter is so-called because it doesn't seem to interact with the electromagnetic field, which means it doesn't emit electromagnetic radiation like light or absorb electromagnetic radiation like it does. As a result, it is hard to detect. Numerous astrophysical observations support the existence of dark matter, including gravitational effects that cannot be described by the gravity theories currently in use without the presence of more matter than can be observed. Because of this, the majority of scientists believe that dark matter is prevalent in the universe and has greatly influenced its structure and evolution.
To learn more about dark matter from the given link:
https://brainly.com/question/17036562
#SPJ4
A sound wave has a speed of 340 m/s and a frequency of 1000 hz. The period of the sound is closest to?
The frequency and the period are inversely proportional.
[tex]f=\dfrac{1}{T}[/tex] where T is the period
Solving the QuestionWe're given:
v = 340 m/sf = 1000 HzBecause the frequency and the period are reciprocals of each other, we can find the period of the sound by finding the reciprocal of the frequency:
[tex]T=\dfrac{1}{1000}[/tex]
Answer[tex]T=\dfrac{1}{1000}[/tex]
The potential energy at x = 8 m is -2000 V and at x = 2 m is 400 V. What is the magnitude and direction of the electric field?
The potential energy at x = 8 m is -2000 V and at x = 2 m is 400 V. The magnitude and direction of the electric field will be 400 V/m directed parallel to the +x-axis
Electric field, an electric property associated with each point in space when charge is present in any form. The magnitude and direction of the electric field are expressed by the value of E, called electric field strength or electric field intensity or simply the electric field.
The electric potential energy of any given charge or system of changes is termed as the total work done by an external agent in bringing the charge or the system of charges from infinity to the present configuration without undergoing any acceleration.
The relation between electric field and electric potential can be generally expressed as – “Electric field is the negative space derivative of electric potential.”
Electric field = - d V / dx
-(-2000-400) = [tex]\int\ {E} \, dx[/tex]
2400 = E (8-2)
2400 V = E (6)
E = 400 V/m
To learn more about electric potential energy here
https://brainly.com/question/16890427
#SPJ4
The annual variation in the amount of solar radiation received varies with latitude because the ______.
The annual variation in the amount of solar radiation received varies with latitude because the direction of Earth's tilt changes with respect to the Sun during the year.
How does solar radiation vary with latitude ?
Despite the fact that high latitude regions receive more solar radiation than low latitude regions do, heat is nevertheless transported throughout the planet by the ocean and the atmosphere.
How does the amount of solar radiation received vary on Earth?
As a result of reduced radiation protection, areas closer to the equator typically experience higher levels of solar radiation exposure. However, because to the angle of the sun and the tilt of the Earth's axis, areas farther north or south receive more solar energy.What is the relationship between the annual solar radiation cycle and the annual temperature cycle?
The coldest day of the year occurs after the winter solstice, and the warmest day of the year occurs (on average, so many days) after the summer solstice, because the annual temperature cycle lags the annual radiation cycle.
Learn more about direction of Earth's tilt
brainly.com/question/23078159
#SPJ4
Vector u has a magnitude of 5 units and a direction angle of 75°, and vector v has a magnitude of 6 units and a direction angle of 210°. what is the component form of the vector u v?
-3.90, 1.83 are the component form of the vector u v.
What is magnitude of vector?
The magnitude of a vector formula is used to calculate the length for a given vector (say v) and is denoted as |v|. So basically, this quantity is the length between the initial point and endpoint of the vector.The component form of a vector is the ordered pair that describes the changes in the x- and y-values. In the graph above x1=0, y1=0 and x2=2, y2=5. The ordered pair that describes the changes is (x²- x, y²- y), in our example (2-0, 5-0) or (2,5).We have vector u = 5 ( cos 75 i + sin 75 j )
= 1.294 i + 4.830 j
Vector v = 6 ( cos 210 i + sin 210 j )
= -5.19 i - 3 j
Now we add both component
u + v = 1.294 i + 4.830 j + (-5.19 i - 3 j)
= -3.90 i + 1.83 j
= < -3.90, 1.83>
Learn more about component form of a vector
brainly.com/question/25138765
#SPJ4
The correct option is (D). < -3.90, 1.83>
Vector is a quantity with both magnitude and direction. It is often represented by an arrow whose length is proportional to the magnitude of the quantity and whose direction is the same as that of the quantity.
What are vectors?
Quantities with both a magnitude and a direction are called vectors. A vector can be used to represent a vehicle's motion in the real world. 65 mph is the direction of travel for the car. In this illustration, the vector's magnitude is represented by the car's 65 mph speed and its direction by the northwest. In the study of physics, the use of vectors to depict how forces operate on objects is crucial.Given, vector u = 5 ( cos 75 i + sin 75 j ) = 1.294 i + 4.830 j
Vector v = 6 ( cos 210 i + sin 210 j ) = -5.19 i - 3 j
u + v = 1.294 i + 4.830 j + (-5.19 i - 3 j) = -3.90 i + 1.83 j
= < -3.90, 1.83>
Learn more about Vectors with the help of the given link:
https://brainly.com/question/14447709
#SPJ4
Given that ethylene has a λmax of 175nm, butadiene has a λmax of 220nm, and 2-methyl-1,3-butadiene has a λmax or 215nm, what is the λmax of 2,3,4-trimethylhexatriene?
The λmax of 2,3,4-trimethylhexatriene is 280 nm.
Ethylene has a λmax of 175nm.
Butadiene has a λmax of 220nm.
2-methyl-1,3-butadiene has a λmax or 215nm.
1,3,5-hexatriene has a λmax of 258nm.
Woodward's rules, sometimes known as Woodward-Fieser rules (after Louis Fieser) and named after Robert Burns Woodward, are a number of sets of empirically developed principles that aim to forecast the wavelength of the absorption maximum (max) in an ultraviolet-visible spectrum of a certain molecule.
By using the Woodward Fieser rule,
R- (Alkyl Group) .... +5 nm = 5 × 2 = 10
RO- (Alkoxy Group) .. +6 = 6 × 2 = 12
Adding 22nm to the λmax of 1,3,5-hexatriene as it has 2 alkyl groups and 2 alkoxy groups to form 2,3,4-trimethylhexatriene.
The λmax of 2,3,4-trimethylhexatriene is 280 nm.
Learn more about Woodward-Fieser here:
https://brainly.com/question/16982345
#SPJ4
Fetch is ________. Group of answer choices the distance between the trough of a wave and the still water level the circular pattern made by water particles when a wave passes a method of shoreline erosion control the distance over which the wind blows over open water
Fetch is the distance over which the wind blows over open water generating mechanical waves; option D
What are waves?Waves are disturbance which occur in a substance or medium which project energy as they travel along a particular plane or direction.
There are two types of waves:
mechanical waveselectromagnetic wavesMechanical waves are waves which involve the disturbances that occur in particulate matter and which require a material medium for their transmission.
Fetch is an area of ocean or lake surface over which the wind blows in a constant direction, thus generating waves.
In conclusion, mechanical waves require material media for transmission.
Learn more about mechanical waves at: https://brainly.com/question/26393035
#SPJ1
What is the reactance of a 9. 0×10−2 μf capacitor connected to a 23 kv (rms), 550 hz line?
The Capacitive reactance of the capacitor is 3.22kΩ.
To find the answer, we have to study about the Capacitive reactance.
How to find the Capacitive reactance?It is given that,[tex]C=9*10^{-8}F\\f=550Hz\\[/tex]
Thus, the expression for capacitive reactance will be,[tex]X_c=\frac{1}{2\pi fC}[/tex]
By substituting values, we get,[tex]X_c=\frac{1}{2\pi *550*9*10^{-8}} \\\\X_c=3.22*10^3Ohm.[/tex]
Thus, we can conclude that, the Capacitive reactance of the capacitor is 3.22kΩ.
Learn more about the Capacitive reactance here:
https://brainly.com/question/27853857
#SPJ4
If a force always acts perpendicular to an object's direction of motion, that force cannot change the object's kinetic energy.
a. true
b. false
If a force always acts perpendicular to an object's direction of motion, that force cannot change the object's kinetic energy. It is a true statement .
Kinetic energy is the energy that an object possesses due to its motion. It is basically the energy of mass in motion. Kinetic energy can never be negative and it is a scalar quantity i.e. it provides only the magnitude and not the direction.
According to law of conservation of mechanical energy change in potential energy is equal and opposite to the change in the kinetic energy.
According to the principle of conservation of mechanical energy, The total mechanical energy of a system is conserved i.e., the energy can neither be created nor be destroyed; it can only be internally converted from one form to another if the forces doing work on the system are conservative in nature.
since, potential energy is stored in the form of work done
Work done = Fs cos (theta)
If force always acts perpendicular to an object's direction of motion
theta = 90 °
cos (90 ) = 0
Work done = 0
since , there is no work done , hence kinetic energy will not change
To learn more about kinetic energy here
https://brainly.com/question/12669551
#SPJ4
Identify the saturation pressure corresponding to 32 degrees fahrenheit for r - 123
Hg vacuum at 20 inches is the saturation pressure that corresponds to 32 degrees Fahrenheit of R-123.
To find the answer, we need to know more about the saturation pressure.
What is saturation pressure?The saturation pressure is the pressure at which a vapor is in equilibrium with its liquid (such as steam with water).It is the highest pressure that water vapor can get at a particular temperature.R-123 refrigerant is probably hard to find these days. It was discovered that chlorine-containing refrigerants have the potential to actively harm the Ozone layer if they are released into the atmosphere.The saturation pressure that corresponds to 32 degrees Fahrenheit of R-123 is 20 inches Hg vacuum.Thus, we can conclude that, Hg vacuum at 20 inches is the saturation pressure that corresponds to 32 degrees Fahrenheit of R-123.
Learn more about the saturation pressure here:
https://brainly.com/question/601501
#SPJ4
If a closed loop lies partially inside and partially outside a region of changing magnetic field, which is true about calculating the induced electric field along the path?
If a closed loop lies partially inside and partially outside a region of changing magnetic field, to calculate the induced electric field along the path we use only the area within the flux change to calculate the electric field.
Induced Electric Fields:The electrostatic field is conservative and does no net work over a closed path, whereas the induced electric field is nonconservative and does net work in transferring a charge over a closed channel. As a result, whereas the induced field cannot be connected with electric potential, the electrostatic field can.
Faraday's law can be written in terms of the induced electric field as. ∮→E⋅d→l=−dΦmdt. The electrostatic field created by a fixed charge distribution and the electric field caused by a changing magnetic field is very different from one another.
An electric field is created by a fluctuating magnetic flux. The induced emf from Faraday's law is related to the fluctuating magnetic flux and the induced electric field.
Learn more about induced electric field here:
https://brainly.com/question/15581205
#SPJ4
Suppose there were no solar wind. How would the appearance of a comet in our inner solar system be different?.
If there were no solar wind, then the appearance of a comet in our inner solar system would be different because it would have only one tail instead of two.
What is a comet?A comet is a celestial body that travels across the Universe and releases gases when warms by passing near the stars such as the Sun.
Comet tail is the result of gas and dust due to this process of warming, which is directly related to solar winds.
In conclusion, if there were no solar wind, then the appearance of a comet in our inner solar system would be different because it would have only one tail instead of two.
Learn more about comets here:
https://brainly.com/question/14157013
#SPJ1
While walking between gates at an airport, you notice a child running along a moving walkway. Estimating that the child runs at a constant speed of 2. 4 m/s relative to the surface of the walkway, you decide to try to determine the speed of the walkway itself. You watch the child run on the entire 18-m walkway in one direction, immediately turn around, and run back to his starting point. The entire trip takes a total elapsed time of 32 s. Given this information, what is the speed of the moving walkway relative to the airport terminal?.
Speed of walkway = 1.84 m/s
let x=speed of walkway
then (2.8+x)= speed of child moving in direction of walkway
then (2.8-x)= speed of child moving against direction of walkway
Travel time=distance/speed
travel time of child moving in direction of walkway=23/(2.8+x)
travel time of child moving in direction of walkway=23/(2.8-x)
total elapsed time given=29s
23/(2.8+x)+23/(2.8-x)=29
LCD=(2.8+x)(2.8-x)
23(2.8-x)+23(2.8+x)=29(2.8+x)(2.8-x)
23*2.8-23x+23*2.8+23x=29(2.8^2-x^2)
23(2.8+2.8)/29=2.8^2-x^2
x^2=(2.8)^2-(23*5.6)/29)=3.4
x=sqrt(3.4)=1.84m/s
Speed of walkway = 1.84 m/s
Learn more about Speed here:
https://brainly.com/question/4931057
#SPJ4
In what part of the electromagnetic spectrum does the sun radiate maximum energy? How does this compare to earth?
The visible region of the electromagnetic spectrum is where the Sun radiates maximum energy. Since Earth is substantially cooler, the majority of the radiation it emits is longwave radiation.
The complete spread of electromagnetic radiation by wavelength or frequency. Despite the fact that all electromagnetic waves have a wide range of frequencies, wavelengths, and photon energies, they all move at the speed of light in a vacuum known as the electromagnetic spectrum.
The sun emits electromagnetic waves over a wide spectrum, from radio waves with a wavelength of 10 meters to X-rays with a wavelength of 2 nanometers. Visible light, with a wavelength of around 500 nanometers, is the most powerful of them to reach the earth's surface. The visible spectrum is where the Sun's energy is most intensely emitted. The maximum amount of radiation that the Earth emits occurs at 10 mm, in the infrared heat spectrum. Since the Earth's surface temperature is far lower than that of the sun and its radiation has longer wavelengths than solar radiation, the majority of this energy is then reradiated into space. The atmosphere is easily able to absorb the longer wavelengths that the Earth radiates.
To know more about electromagnetic spectrum refer to: https://brainly.com/question/10411454
#SPJ4
Imagine that you’re observing a collision. which action would allow you to determine whether the collision is inelastic?
Observe whether the colliding objects change their shape.
When observing a collision, we observe whether the colliding objects change their shape to see whether the collision is inelastic.
What is an inelastic collision?An inelastic collision is one in which the kinetic energy is lost. In an inelastic collision, the system's momentum is conserved, but its kinetic energy is not.
Which way does an elastic collision occur?Solution: (i) An inelastic collision occurs when the total initial kinetic energy of the bodies prior to the collision does not equal the total final kinetic energy of the bodies following the collision. Momentum is retained in (ii). In an inelastic collision, kinetic energy is not conserved.What are two instances of collisions that are completely inelastic?When two objects move as one mass after colliding, this is known as a perfectly inelastic collision. Examples: hitting a target board with an arrow. a meteor getting buried in the cracks of the Earth. The two items have united.To learn more about inelastic collision visit:
https://brainly.com/question/14521843
#SPJ4
What's the largest number of beats per second that will be heard from which pair of tuning forks?
The largest number of beats per second that will be heard from 763 and 774 Hz pair of tuning fork .
The beat frequency is equal to the complete value of the alteration in the frequency of the two waves. The count of beats per second is equivalent to the difference in frequencies of two waves is called beat frequency.
A tuning fork is a two-pronged metal fork that can be used as an acoustic resonator. Traditionally, this tool has been used to tune musical instruments. Tuning forks work by releasing a perfect wave pattern to match a musician's instrument.
The largest number of beats per second that will be heard from 763 and 774 Hz pair of tuning fork .
To learn more about beat frequency here
https://brainly.com/question/21923211
#SPJ4
If the fifth order minimum in the diffraction pattern of a thin slit is at 40° from the central maximum, what is the highest order minimum in the pattern?
The highest order minimum in the diffraction pattern [tex]7^{0}[/tex].
Diffraction patternThe same way that an imaging mode electron beam is focused on the material to create an image, a parallel electron beam is used to create diffraction patterns. The beam transmitted is focused on the screen's diffraction pattern by the intermediate lens and its chosen area aperture, which determines the beam's width.
Crystallography studies of materials can benefit from the diffraction mode. Using this mode, one can establish the space group and orientation of crystals. the anoparticle's diffraction pattern, which is depicted on the left. The little spots and rings in polycrystalline samples indicate that it is crystalline.
A disc's closely spaced tracks work as a diffraction grating to create the well-known rainbow pattern that is seen while staring at a disc, which is one of the most spectacular instances of diffraction.
If the fifth order minimum in the diffraction pattern of a thin slit is at 40° from the central maximum, what is the highest order minimum in the pattern?
Learn more about diffraction pattern here:
https://brainly.com/question/12290582
#SPJ4
Doctors once believed that illness was caused by foul air and could not be transmitted from one person to another. now, doctors know that single-celled bacteria and even smaller viruses cause illnesses and can be transmitted from one person to another. how did the advent of the microscope most likely affect the foul-air theory? it supported the theory of foul air causing illness and helped the theory become a law. it provided evidence for other causes of illness, but scientists did not change the theory. it allowed scientists to change the theory before any new information was collected. it allowed scientists to see small organisms in sick individuals and change the theory.
To learn more about microscope visit:
https://brainly.com/question/507443
#SPJ4
5.
A train is moving on a straight track with a speed of 70.0km/h [E]. It slows down at a rate
of 2.00m/s2 [W] in a distance of 35.0m. Determine
a.The final speed of the train. b.How much time the train took to slow down to this speed.
Answer:
t = 1.659s
Explanation:
We can use the kinematics equations to solve this questions:
v = u + at
[tex]v^{2} = u^{2} +2as[/tex]
where v = Final Velocity, u = initial velocity, a = acceleration, t = time, s = displacement
a) Given information from the question,
u = [tex]\frac{70km}{h} =\frac{(70*1000)m}{(1*3600)s} = 19.444m/s[/tex] (Convert km/h to m/s first)
a = [tex]2m/s^{2}[/tex]
s = 35m
Now we can substitute these values into the 2nd kinematics equation to find v, final velocity.
[tex]v^{2} =(19.444)^{2} +2(2)(35)\\v=\sqrt{(19.444)^{2} +2(2)(35)} \\v= 22.761m/s (5.sf)\\[/tex]
b) Now we have the final velocity, we can substitute the values into the first kinematics equation to find t , the time taken.
v = u + at
22.761 = 19.444 + 2t
2t = 22.761 - 19.444
t =[tex]\frac{22.761-19.444}{2}[/tex]
t = 1.659s
1- name the three things that must be present for a fire to exist. 2- water extinguishes fires in three ways. Name them. 3- there are two general types of hazards. Name them. 4- define each of the following characteristics of materials and tell each is important in industrial safety a. Flash point b. Flame point c. Ignition point d. Vapor pressure e. Specific gravity f. Evaporation rate g. Melting point h. Viscosity i. Boiling point.
1. Oxygen, heat, and fuel
These three things that must be present for a fire to exist.
2. (a) In order to put out the fire, it achieves this by removing the heat from it.
(b) Water can also be used to separate the fire from the oxygen source.
(c) It smothers it, preventing it from igniting more airborne oxygen.
Water extinguishes fires in these three ways.
3. (a)physical hazard
(b)chemical hazard
4.(a) If a liquid's flash point is lower than 60°C, it is regarded as flammable.
Regarding the security of spill cleaning activities, flash point is a crucial consideration.
When spilled, gasoline and other light fuels pose a considerable risk since they can ignite in the majority of ambient conditions.
(b) If your material's label contains a flame symbol, it means the substance is combustible, and you should review your SDS to learn more about the dangers and risks associated with using the substance.
(c) the lowest temperature at which combustible material ignites in air and continues to burn when heated (as in a bath of molten metal)
(d) The pressure that a vapor exerts on its condensed phases (solid or liquid) in a closed system at a specific temperature is known as vapor pressure.
(e) The difference between an object's density and that of a standard substance is its specific gravity.
Depending on its value, the specific gravity might indicate whether an object will float or sink in our reference substance.
(f) The ratio of the time needed to evaporate a test solvent to the time needed to evaporate the reference solvent under the same circumstances is the evaporation rate.
The findings can be stated as a relative rate, the percentage that evaporated within a given time frame, or the length of time needed to evaporate a given volume.
(g) The temperature at which a specific solid material melts, or transitions from a solid state to a liquid, is known as the melting point.
(h) The resistance of a fluid (liquid or gas) to a change in shape or motion of adjacent sections relative to one another is known as viscosity. Viscosity is a sign of flow resistance.
(i) The boiling point of a liquid is the temperature at which the pressure of the liquid's vapor equals the pressure of its surroundings.
To learn more about industrial safety visit:
https://brainly.com/question/8157575
#SPJ4
Q.9 And Q.10 correct answer with explaination
The option c will be correct in Q10.
What is angular velocity?Time rate at which an object rotates about axis or at which angular displacement between two bodies changes.
We have given is
r=4i , angular acceleration = 4j
v= radius×angular acceleration
v= 4i ×k
v=16j
When we cross i× k = j
to learn more about angular velocity click here https://brainly.com/question/13649539
#SPJ9
When full, the innermost electron shell of argon contains ________ electrons, and the outermost shell contains ________ electrons.
The innermost electron shell of argon contains 2 electrons, and the outermost shell contains 8 electrons.
To find the answer, we have to know more about the electronic configuration.
What is the electronic configuration of Argon?As we know that, the element Argon in the periodic table has an atomic number of 18.Since its atomic number is 18, it should have 18 number of electrons in the elemental state.The first shell or K shell of Argon can carry 2 electrons, and rest of the 16 electrons will filled in the L and M shells.For, L has a maximum number of 8 electrons, and thus, the rest 8 will move to M.Thus, we can conclude that, the innermost electron shell of argon contains 2 electrons, and the outermost shell contains 8 electrons.
Learn more about the electronic configuration here:
https://brainly.com/question/17515720
#SPJ4
A carnival ride accelerates upwards at 2.5 m/s. what is the apparent weight of a 35 kg child on the ride
The apparent weight of the child is 437.5 N.
Calculation:The weight of a person/object moving up with an acceleration "a" is given by
W = m (g + a)
where,
W = apparent weight
m = mass of the person/object
g = acceleration due to gravity = 10 m/s²
a = acceleration of the object/person
Given,
m = 35 kg
a = 2.5 m/s²
To find,
W =?
Put the value sin the formula,
W = m (g + a)
W = 35 (10 + 2.5)
= 35 (12.5)
= 437.5 N
Therefore, the apparent weight of the child is 437.5 N.
Learn more about apparent weight here:
https://brainly.com/question/13554234
#SPJ4
An object is dropped from the top of a building and is observed to take 7. 2s to hit the ground. How tall is the building?.
the height of the building is H=36 m.
What is The Law of Gravity?According to Newton's law of gravity, every particle of matter in the universe is attracted to every other particle with a force that varies directly as the product of their masses and inversely as their distance from one another.
Properties of Gravity -
It is a universal attractive force. It is directly proportional to the product of the masses of the two bodies. It obey inverse square law. It is the weakest force known in nature.Examples of Gravity -
The force that holds the gases in the sun.The force that causes a ball you throw in the air to come down again.The force that causes a car to coast downhill even when you aren't stepping on the gas.v₀=0 m/s
H₀=0 m
g=10 m/s²
t=7,2 s
H - ?
[tex]H= H_{0} + v_{0}t+\frac{gt^{2} }{2} \\[/tex]
H = 0 +0 × 7.2 + 10(7.2)²/2
H = 36m
to learn more about Gravity go to - https://brainly.com/question/12528243
#SPJ4
The quartz crystal in a digital watch has a frequency of 32. 8 khz. what is its period of oscillation?
Time Period of Oscillation-1/32800 Hz
Time Period of Oscillation - 3.04 × 10¹.
Two related parameters are oscillation frequency and period. Actually, they are the opposites of one another. As a result, the following formula can be used to determine the quartz crystal's oscillation period:
Time Period of Oscillation = 1/Oscillation Frequency
where.
Frequency of Oscillation-32.8 KHz
Frequency of Oscillation - 32800 H₂
Therefore
Time Period of Oscillation-1/32800 Hz
Time Period of Oscillation - 3.04 × 10¹.
learn more about Oscillation https://brainly.com/question/12622728
#4256
The time period of oscillation is 3.04×10
what is time period?
A time period (denoted by 'T'' ) is the time taken for one complete cycle of vibration to pass a given point.[1] As the frequency of a wave increases, the time period of the wave decreases. The unit for time period is 'seconds'.
The related parameters are oscillation frequency and period.They are the opposite of the another.As a result the formula to be used is
frequency=1/time
given:
Frequency of oscillation=32.8khz=32800hz
therefore,
time period of oscillation=1/32800hz
time period of oscillation=3.04×10
learn more about oscillation from here: https://brainly.com/question/28167898
#SPJ4
On a planet in the solar system where the sky normally scatters light of lower frequencies, its sunsets would be?
The sky will appear in blue color at the sunset, if the sky of the planet scatters light of lower frequencies.
To find the answer, we have to know more about the scattering of light.
What is scattering of light?When light travels from one medium, like air or a glass of water, to another, scattering occurs. Part of the light is absorbed by the medium's particles, followed by subsequent radiation in a particular direction. The size of the scattered light's particles and its wavelength affect how intense it is.If the sky scatters a low frequency light, during sunset, this low frequency light will be totally absorbed by the atmospheric particles, and we can only be able to see the high frequency light.Thus, we can say that the sky will appear in blue color at the sunset, if the sky of the planet scatters light of lower frequencies.
Learn more about the scattering here:
https://brainly.com/question/20913688
#SPJ4
A bubble of air of volume 1 cm^{3} is released by a deep-sea diver at a depth where the pressure is 4.0 atmospheres. Assuming its temperature remains constant (T1 = T2), what is its volume just before it reaches the surface where the pressure is 1.0 atmosphere?
The volume of the bubble just before the surface is 4 cm^3.
What is Boyle's law?As per Boyle's law,the volume of a gas at constant temperature varies inversely with the pressure exerted on it.P1V1=P2V2where , P1=pressure at the initial stageV1=volume of the initial stage
P2= pressure at the final stage
V2= volume at the final stage
How to calculate volume of the bubble just before the surface of water ?P1=4atm, V1=1cm^3, P2=1atmV2=P1V1/P2=(1×4)/1
=4cm³
Thus , we can conclude that the volume of the bubble just before the surface of water is 4cm³.
Learn more about Boyle's law here:
brainly.com/question/24938688
#SPJ1
