A sample of grape juice has a hydroxide ion concentration of 1.4 × 10-10 M. Is the grape juice more or less acidic than a sample of orange juice that has a hydronium ion concentration of 1.8 × 10-4 M? To compare the acidity of the orange juice and grape juice, compare the hydronium ion concentrations and/or pH values of the two solutions. How does the acidity of a solution vary with hydronium ion concentration and pH?

Answers

Answer 1

For the grape juice, we get that the hydroxyl ion concentration is  1.4 ×10-10M.

Hence, pOH will be = -log[1.4*10⁻¹⁰] which is approximately 9.6.

Now the value of pH will be = 14-pOH = 14 - 9.6 = 4.4.

For the orange juice, we know that the H+ or hydronium ion concentration is  1.8 × 10-4 M.

Then, the value of the pH will be= -log[1.8*10⁻⁴]=3.7.

Thus from the above result, it is clear that the range juice has lower pH, hence it will be more acidic. While the grape juice will be less acidic.  

The pH can either go up or down depending on the change in hydronium concentration. If the hydronium concentration increases, the pH decreases, causing the solution to become more acidic. This happens when an acid is introduced. As H+ ions dissociate from the acid and bond with water, they form hydronium ions, thus increasing the hydronium concentration of the solution. If the hydronium concentration decreases, the pH increases, resulting in a solution that is less acidic and more basic. This is caused by the OH^- ions that dissociate from bases

Learn more about Acid :

https://brainly.com/question/15832107


Related Questions

You time travel 100 years into the future and learn that several new elements have been discovered, as pictured. These elements are frequently found as oxides, and need to be separated in order to extract the pure element. Before going through this effort, it is useful to know what amount of the element can be extracted. What is the mass percent composition of element T in the compound T6O5?

Answers

We obtain the mass percent of the element T as 96.5%.

What is the mass percentage?

We know that the mass percent actually has to do with the mass of the object that we could have in a compound expressed as a percentage. Note that we are told that most of the new elements that were discovered do exist as oxides this implies that they are binary compounds of the element that is involved and oxygen.

Now we have to look at the section of the table that have been given in the question so as to be able to obtain the the mass percent of the element as we have it. We can see as it has been written in the table that the atomic mass of the element T is found to be 362.31.

We would now have;

Molar mass of the compound = 6(362.31) + 5(16)

= 2173.86 + 80

= 2253.86

Mass percent composition of element T =  6(362.31)/2253.86 * 100/1

= 96.5%

Learn more about mass percent:https://brainly.com/question/5394922

#SPJ1

How many atoms are there in 65.0 grams of methane, CH4?

Answers

Methane (CH4) is a hydrocarbon that is mostly found in natural gas and has a molecular weight of 4.051747moles per 65.0 grams.

What effects has methane on people?

Methane concentrations above a certain threshold can affect how much oxygen is breathed in. This can include headaches, face flushing, memory loss, vision issues, slurred speech, mood swings, nausea, and vomiting. Serious cases could result in altered breathing and heart rate, balance issues, numbness, and coma.

Why is methane bad? What is it?

The gas methane (CH4) is colorless, odorless, and very combustible. Carbon and hydrogen are its main ingredients. According to us Environmental Protection Agency, it is also a powerful greenhouse gas, meaning means it influences climate change by causing more warming.

To know more about methane visit;

https://brainly.com/question/2127750

#SPJ13

If 5 g of Al (26.98g/mol) reacts with 9 g of O2 (32 g/mol), how many grams of Al2O3 (101.56 g/mol) can be formed/

Answers

Based on the mole ratio of the reaction, the mass of aluminum oxide that is produced from the reaction between 5 g of aluminum and 9g of oxygen is 9.39 g.

What mass of aluminum oxide can be formed from the reaction between aluminum and oxygen?

The mass of aluminum oxide that can be formed from the reaction between aluminum and oxygen is determined from the limiting reactant and the mole ratio of the reaction.

The mole ratio of the reaction is as given in the equation of the reaction below:

2 Al (s) + 3 O₂ (g) ----> Al₂O₃ (s)

The mole ratio of Al to O = 2 : 3

Moles of Al present = 5/27

Moles of Al present = 0.185 moles

Moles of O present = 9/32

Moles of Al present = 0.281 moles

Al is the limiting reactant

Mole ratio of Al to Al₂O₃ = 2 : 1

Mass of Al₂O₃ produced = 0.185/2 * 101.56

Mass of Al₂O₃ produced = 9.39 g

Learn more about limiting reactants at: https://brainly.com/question/26905271

#SPJ1

what is the purpose behind decantation​

Answers

Decantation is widely used to purify a liquid by separating it from an insoluble particle suspension (e.g. in red wine, where the wine is decanted from the potassium bitartrate crystals to avoid unsavory taste).

Decantation is a process of separating solid-liquid mixtures or two or more immiscible liquids. Allowing the mixture to settle into various layers, the lightest/heaviest liquid layers are drained out.

This approach is used in the following ways:

1. Mud-water mixture separation (solid-liquid mixture)

2. Oil and water separation (immiscible liquid mixture)

3. Kerosene and water separation

Decantation is the process of separating liquid from solid and other immiscible (non-mixing) liquids by eliminating the liquid layer on top from the solid or liquid layer underneath.

To learn more about potassium bitartrate crystals visit:https://brainly.com/question/8717978

#SPJ9

Question: Early one October, you go to a pumpkin patch to select your Halloween pumpkin. You lift the 3.2 kg pumpkin to a height of 1.4 m , then carry it 50.0 m (on level ground) to the check-out stand.

Part A: Calculate the work you do on the pumpkin as you lift it from the ground.
Express your answer using two significant figures. W = ? J

Part B: How much work do you do on the pumpkin as you carry it from the field?
Express your answer using two significant figures. W = ? J

Answers

A) The work you do on the pumpkin is 31.36 J as you lift it from the ground.

B) The work is zero as you carry it from the field.

What is work?

Work can be defined as the energy spent when applying a force to move an object through a certain displacement.

The work by a force to move an object through a displacement (d) can be written as:

W = Fdcosθ

Where θ is angle between force and displacement.

(a) The mass, the displacement of the pumpkin from the ground, and the angle are:

m = 3.2 kg

d = 1.4 m

θ = 0∘

Here, the force exerted during lifting the pumpkin is equal to the weight of the pumpkin:

F = mg = (3.2)(9.8) = 31.36 N

Thus, the work done when lifting the pumpkin is

W = F d cosθ = (31.36 N)(1.4m)cos(0∘) = 44 J

(b) When carrying the pumpkin, the force exerted will be upward while the displacement of the pumpkin will always be directed forward. Therefore, they are perpendicular (i.e. θ = 90∘) to each other which is the reason why the work is zero.

Learn more about work, here:

https://brainly.com/question/13662169

#SPJ1

The Mackenzie River in northern Canada contains, on average,

0.820 mM Ca2+
0.430 mM Mg2+
0.300 mM Na+
0.0200 mM K+
0.250 mM Cl–
0.380 mM SO42–
and
1.82 mM HCO3–.

What, on average, is the total mass of these ions in 4.75 L of Mackenzie River water?

Answers

On average, the total mass of ions in 4.75 liters of Mackenzie River water is 0.466 g grams.

What is the total mass of ions?

The formula mass of an ionic compound is determined in the same manner as the formula mass of a covalent compound is determined: by adding the average atomic masses of all the atoms in the compound's formula.

Hence, the total mass is computed as follows:

(0.820 mM Ca 2⁺) X ( 2.25 L) = 1.845 mmoles at 40.0 g/mol = 73.8 mg

(0.430 mM Mg 2⁺) X ( 2.25 L) = 0.9675 mmoles at 24.3 g/mol = 23.51 mg

(0.300 mM Na⁺) X ( 2.25 L) = 0.675 mmol at 23.0 g/mol = 15.52 mg

(0.0200 mM K⁺) X ( 2.25 L) = 0.045 mmol at 39.1 = 1.75 mg

(0.250 mM Cl-) X ( 2.25 L) = 0.5625 mmol at 35.45 g/mol = 19.94 mg

(0.380 mM SO₄²-) X ( 2.25 L) = 0.855 mmol at 96.06 g/mol = 82.13 mg

(1.82 mM HCO₃ -) X ( 2.25 L) = 4.095 mmol at 61.02 g/mol = 249.87 mg

Thus, total mass = 73.8 + 23.51 + 15.52  + 1.75 + 19.94 + 82.13 + 249.87

= 466.52mg

Converted into grams  we have:
466.52/1000

= 0.46652

Hence, on average, the total mass of these ions 4.75 L [tex]\approx[/tex] 0.47 grams.

Learn more about Total Mass:
https://brainly.com/question/17552181
#SPJ1

A pitcher throws a baseball with a speed of 90 mi/s. Then the batter hits the ball at 110 mi/s in 2 seconds. What is the acceleration of the ball?

Answers

Answer:20 mi/s

Explanation:

PLEASE HELP
Can someone explain this?

Commercial concentrated nitric acid, HOg, is 15.8 M. What volume of concentrated HNO; would be required
to prepare 842 mL of 7.77 M HNO}?
Be sure to enter a unit with your answer.

Answers

The volume of the solution is obtained as 414 mL.

What is the required volume?

Often times, we want to  reduce the concentration of a solution and the way that we can be able to do that is by the process of dilution. When we say dilution what it means is that we are going to increase the volume of the solution.

In this case;

C1 = initial concentration

V1 = initial volume'

C2 = final concentration

V2 = final volume

Then;

C1V1 = C2V2

V1 = C2V2/C1

=  7.77 M * 842 mL/ 15.8 M

= 414 mL

Learn more about concentration:https://brainly.com/question/13872928

#SPJ1

2 H + 3 H -----> 2 He + 1 n
1 1 4 0

Explain in 1-2 sentences: Is the above equation an example of fission or fusion? How do you know? Give at least 2 reasons why.

Answers

The given reaction is an example of nuclear fusion.

This is because two lighter hydrogen atoms fuse to give a heavier helium atom. There is also an increase in the atomic number of the product.

What are nuclear fission and nuclear fusion reactions?

Nuclear fission reactions are reactions in which the nucleus of large atoms are split into nucleus of two or more smaller atoms.

For example, uranium atoms split into krypton and barium.

Nuclear fusion reactions involve the nucleus of two or more smaller atoms combining to give an atom of a larger nucleus.

For example, hydrogen atoms fuse to give a helium atom.

Learn more about nuclear fusion and fission at: https://brainly.com/question/14019172

#SPJ1

What mass of each reactant would be needed to produce 100.0 kg of methanol in CO + H2 = CH3OH

Answers

87420 g  CO and 12580 g H2 mass would be needed to produce 100.0 kg of methanol in CO + H2 = CH3OH.

The atomic mass of an element refers to the mass of the constituents that make up its atom. A multiple of 1.992646547 1023 gram, or more specifically, 1.992646547 gram, is used to denote one-twelfth of the mass of the carbon-12 atom, which has an ascribed atomic mass of 12 units. On this scale, one atomic mass unit is equal to 1.660539040 1024 grammes (amu). In honour of English physicist John Dalton, the atomic mass unit is occasionally called the dalton (Da).

To know more about  mass visit : brainly.com/question/5661976

#SPJ1

Which substance (Na, Mg, or Ca) do you identify with and why?

Answers

The metals known as Alkaline Earth metals are Na, Mg, or Ca. They are known as "alkaline" earth metals because when they interact with water, they produce "alkaline" hydroxides solutions.

How many metals made of alkaline earth exist?

Any of the six chemical elements that make up Group 2 (II a) of the periodic table is an alkaline-earth metal. Beryllium (Be), magnesium (Mg), calcium (Ca), strontium (Sr), barium (Ba), and radium are the constituent elements (Ra).

What other names do alkaline earth metals go by?

The alkaline earth oxides, formerly known as beryllia, magnesia, lime, strontium, and baryta, are what give the alkaline earth metals their name. These oxides turn basic when combined with water (alkaline).

To know more about Alkaline Earth metals visit:-

https://brainly.com/question/12835232

#SPJ1

Indicate how the concentration of each species in the chemical equation will change to reestablish equilibrium after changing the concentration of the reactant or product. An up arrow indicates an increase in concentration, a down arrow indicates a decrease in concentration, and leaving it blank means there is no change in the concentration. after the concentration of Br₂ is decreased after the concentration of HBr is increased H₂(g) + Br₂(g) O 0 □ ↓ Answer Bank ↑ 2HBr(g) 0 □​

Answers

The concentration of species in the reaction changes the reaction in the following ways: decrease carbon dioxide = forward direction of reaction.

The direction of the reaction can be assessed by the following.  On increasing the concentration of the reactant the reaction processes in the forward direction. On increasing the concentration of product the reaction processes in the backward direction.  

The given equilibrium is:

2CO(g) + O2(g) ↔ 2CO2(g)

increase CO = forward direction of reaction  

increase oxygen = forward direction of reaction

decrease CO = no change in equilibrium as reaction not processes.  

decrease oxygen = no change in equilibrium as reaction not processes.  

increase carbon dioxide= reverse direction  

decrease carbon dioxide = forward direction of reaction.

For more information about the direction of reaction, refer to the link: brainly.com/question/2400156

#SPJ9

What is the name of the compound with the chemical formula PbBr4

Answers

The compound with the chemical formula PbBr₄ is called lead(IV) bromide.

Lead(IV) bromide is an inorganic compound composed of the elements lead (Pb) and bromine (Br). The compound is named based on the oxidation state of lead, which is +4 in this case.

In naming compounds, the Roman numeral in parentheses after the element name indicates the oxidation state of the metal. In the case of lead(IV) bromide, the Roman numeral IV indicates that lead is in the +4 oxidation state. This means that lead has lost four electrons to achieve a stable configuration.

The name "lead(IV) bromide" accurately represents the composition and oxidation state of the compound. It is worth noting that lead(IV) bromide is a relatively unstable compound and is not commonly encountered in practical applications.

Hence, the name of the compound is lead(IV) bromide.

Learn more about compound here:

https://brainly.com/question/14117795

#SPJ 4

Which of the following is a true statement about cellular respiration? (4 points) a Cellular respiration occurs only in plant cells. b Cellular respiration occurs only in animal cells. c Cellular respiration occurs in both plant and animal cells. d Cellular respiration occurs in some plant cells and some animal cells.

Answers

Answer:

cellular respiration occurs both in plant and animal cells.

Explanation:

Cellular respiration definitely occurs in animals, it is how we break down glucose to get ATP. Plants first use photosynthesis to produce glucose and then need a way to produce ATP, being cellular respiration.

What organisms consume other living things for food 

Answers

Answer:

Heterotrophs

Explanation:

Heterotrophs are known as consumers because they consume producers or other consumers. Dogs, birds, fish, and humans are examples of heterotrophs. Heterotrophs occupy the second and third levels of the food chain, the chains of organisms that provide energy and nutrients to other organisms.

How much heat is released when an acetylene (C2H2) torch burns 250 grams of fuel? (ΔH of combustion for acetylene = -1300 kJ/mol)

Select one:

135 kJ


32500 kJ


12500kJ


5.2 kJ

Answers

12500 joule heat is released when an acetylene (C2H2) torch burns 250 grams of fuel

q=ΔnH

H  acetylene = -1300 kJ/mo

n=given mass/molar mass

given mass= 250 g

molar mass=26

n= 250/26

n=9.61

q=ΔnH

q=9.61× -1300 kJ/mo

q=-12500 joule

In thermodynamics, heat has a very specific definition that is different from how we generally use the word. When two systems with various surface temperatures come into touch with one another, heat is the thermal energy that is transferred. The letters q or Q stand for heat, which is measured in joules.

Heat is sometimes referred to as a process quantity since it is defined in the context of a process through which energy can be conveyed. We may talk about the heat that a hot cup of coffee imparts to your hand, but we don't talk about the heat that a cup of coffee itself holds. Heat is yet another noteworthy quality.

To know more about  Heat visit :brainly.com/question/13860901

#SPJ1

3 Mg + 1 Fe2O3 --> 2 Fe + 3 MgO

How many grams of magnesium oxide are made from 5.6 grams of magnesium and 10.0 grams of iron (III) oxide ?

Answers

The mass of the magnesium oxide will produce is equal to 9.32 grams

What is a limiting reagent?

A limiting reagent can be described as the reactant in the chemical reaction which is consumed first during the completion of a chemical reaction.

The limiting reagent decides the yield of the product when the amount of the reactants is not taken in stoichiometry.

Given, chemical reaction of magnesium and iron oxide is:

[tex]3 Mg + 1 Fe_2O_3 \longrightarrow2 Fe + 3 MgO[/tex]

The mass of the magnesium = 5.6 g

The number of moles of Mg = 5.6/24 = 0.233

The mass of the iron oxide = 10 g

The number of moles of  Mg = 10/103.8 = 0.096

The 3 moles of Mg react with iron oxide = 1

Then 0.233 moles of Mg react with iron oxide = 0.233/3 = 0.077

Therefore magnesium is a limiting reagent.

The 0.233 moles of Mg will produce magnesium oxide 0.233 moles.

The mass of the magnesium oxide = 0.233 × 40 = 9.32 g

Learn more about limiting reagent, here:

https://brainly.com/question/11848702

#SPJ1

PLEASE HELP
Can someone explain the step?

Calculate the mass (in grams) needed to prepare 0.505 liters of a 0.314 M CH,;O, solution.
You do not need to enter a unit with your answer.

Answers

The concentration terms are molality, normality and mole fraction. Molarity can be used to find out the ionic strength of any solution. Therefore, the mass of CH[tex]_2[/tex]O is 4.80g.

What is molarity?

Molarity can be calculated by dividing number of moles of solute by volume of solution in liter. Molarity is affected by temperature. Its unit is mole/liter. It measure the concentration of any solute in a solution.

Mathematically,

Molarity= number of moles of solute÷ Volume of solution in liter

number of moles of solute =given mass÷ Molar mass of solute

number of moles of solute =mass÷30.03 g/mol

Molarity=0.314 M

Volume of solution=0.505 liters

Substituting all the given values, we get

0.314 M= {mass÷30.03 g/mol}÷ 0.505 liters

mass÷30.03 g/mol=0.15

mass =4.80g

Therefore, the mass of CH[tex]_2[/tex]O is 4.80g.

Learn more about Molarity, here:

https://brainly.com/question/16727614

#SPJ1

a sample of an unknown gas has a volume of 8.00L at 1.00 atm and 25.0°C. How many moles of gas are present

Answers

Answer:

0.3269

Explanation:

You would use the ideal gas law along with the equation Pv=nrt when P is pressure, v is volume, n is the moles of gas you are solving for, r is a constant that is , and t is temperature,

So you are given pressure, volume, and temperature, so you would begin by plugging in your known values:

P = 1atm

V = 8.00 L

T = 298 K ( but you usually want to use Kelvin so you would add 273.15; this is because 0 C is 273.15 K and 25+273=298)

(1)(8)=n(0.0821)(298)

then

8=n(24.4658)

next isolate n by dividing 24.4658 on each side

8/24.4658 = n (24.4658/24.4658)

0.3269=n(1) or n

Liquid octane (CH 3 (CH 2 ) 6 CH 3 ) will react with gaseous oxygen (O2) to produce gaseous carbon dioxide (CO2) and gaseous water (H2O) Suppose 8.0 g of is with 39.5 of oxygenCalculate the minimum mass of octane that could be left over by the chemical reaction. Be sure your answer has the correct number of significant digits

Answers

Answer:

Octane can be written as C8H18.

The balanced equation for combustion of octane is:

2C8H18 + 25 O2 ==> 16CO2 + 18H2O

Finding the limiting reactant:

10.g C8H18 x 1 mol C8H18 / 118 g = 0.0847 moles (÷2->0.042)

61.2 g O2 x 1 mol O2 / 32 g = 1.91 moles (÷25->0.077)

C8H18 is the limiting reactant and will dictate the maximum amount of H2O that can form.

Maximum H2O formed:

0.0847 moles C8H18 x 18 moles H2O / 2 moles C8H18 x 18 g H2O/mol = 14 g H2O formed (2 sig.figs.)

Explanation:

hope it can help you !

Which of the following is an example of an unbalanced force?
A A computer on a table

B A man leaning against a wall

C A girl serving a volleyball

D Fruit in a bowl

Answers

Explanation:

C

as the girl applies a resultant force on the volleyball causing it to accelerate, there's an unbalanced force acting on the ball.

What volume of does 1.24grams of flourine gas occupy under conditions of 5.20 celcius and 2.04atm?

Answers

Volume the fluorine gas occupies = 0.73L

What is volume of a gas ?

The gas's volume:

The area occupied by gaseous particles under normal temperature and pressure circumstances is referred to as the volume of gas.

It is identified as a "V."

The letter "L" stands for "liters," the SI unit of volume.

At normal temperature, a mole of gas has a volume of 24 m3, or 24 000 cm3.

The molar volume of a gas is the name given to this quantity.

The gas equation

PV = n R T

P = pressure = 2.04 atm

T = temperature = 5.20 Celsius = 278.20K

V = volume

n = no of moles = 1.24/19 = 0.065moles

R = gas constant = 0.0821lit atm /K

V = 0.065*0.082*278.20/ 2.04 =  0.73L

Volume the fluorine gas occupies = 0.73L

To know about volume from the link

https://brainly.com/question/27100414

#SPJ1

A student claims that if the downward movement of an electron in a hydrogen atom from n = 6 to n = 2 emits a photon with a wavelength of 410 nm then the electron must absorb a photon with a wavelength of 410 nm to move from n = 2 to n = 6. Is the student correct? Justify your answer.

Answers

Since energy can neither be created nor destroyed, it follows that the wavelength that was absorbed by the electron is also emitted.

What is the Bohr model?

We know that the Bohr model posses the idea that an electron could move from a lower to higher energy level by the absorption of a photon of light. Thus we know that, when we supply energy to the electron, it is that energy that leads to the electronic transition.

It is clear that the energy that the electron has taken in when it moves up is the same as the energy that it would give out when it comes down in accordance with the law of conservation of energy.

Learn more about Bohr model:https://brainly.com/question/3964366

#SPJ1

4. A solid is 5 cm tall, 3 cm wide and 2 cm thick. It has a mass of 129 g. What is its density?

Answers

Answer:
4.3 g/cm³ or 4.3g/cc

Explanation:
Volume(V) = Height × Length × Width
= 5cm × 3cm × 2cm
= 30cm³
Mass(m) = 129gram
So,
Density = m/V
= 129g/30cm³
= 4.3g/cc or 4.3g/cm³

Choose the list that shows the temperatures in order from warmest to coldest.

A) 11°F, 12°F, -11°F, -12°F
B) 12°F, 11°F, -12°F, -11°F
C) 12°F, 11°F, -11°F, -12°F
D) 12°F, -12°F, 11°F, -11°F

Answers

Answer: The answer would be C i think

Explanation:

What is unique about the orbitals around the nucleus of an atom?
Responses

Each orbital has its own set of neutrons.
Each orbital has its own set of neutrons.

Each orbital has electrons of a specific energy level.
Each orbital has electrons of a specific energy level.

Each orbital contain protons.
Each orbital contain protons.

Each orbital has only one electron.

Answers

The unique property of the orbitals around the nucleus of an atom is that each orbital has electrons of a specific energy level; option B.

What are orbitals in an atom?

Orbitals in an atom are regions of space around which electrons are found in an atom.

The orbitals in an atom are also described as energy levels.

Electrons are arranged in atomic orbitals from orbitals having the lowest energy to orbitals having the greatest energy.

The outermost orbital of an atom is known as the valence orbital and electrons found there are known as valence electrons.

Learn more about orbitals at: https://brainly.com/question/14361631

#SPJ1

How do scientists predict how much of a product can be formed?

Answers

The way that scientists predict how much of a product can be formed is through the use of Stoichiometry.

What is Stoichiometry?

The quantitative examination of the constituents of a chemical process is known as chemical stoichiometry. The Greek words "stoikhein" (which means element) and "metron" (which means measure) are the roots of the English word "stoichiometry."

Stoichiometry describes the correlation between the amounts of reactants and products before to, during, and after chemical processes.

Therefore, the quantity of the generated good is predicted by stoichiometry. To calculate how many S'more "reactants," for instance, we employed stoichiometry.

Learn more about Stoichiometry from

https://brainly.com/question/14935523
#SPJ1

How many liters of water are produced from the combustion of 2.5 moles of methane gas?

Answers

Answer:

this is your answer 1234

2. Balance these chemical equations.
(a) SO₂ + O₂SO3
(b) NH3 + O₂N₂ + H₂O
(c) C4H10+ O₂ CO₂ + H₂O
(d) Pb(NO3)2 →PbO + NO₂ + O₂
(e) Al + Fe3O4 →→→ Al₂O3 + Fe
(f) Sr + H₂O-Sr(OH)₂ + H₂

Answers

The balanced chemical equation is [tex]\rm 2SO_2 + O_2 \rightarrow 2SO_3[/tex].

What is balanced chemical equation?

Balanced chemical equation is defined as a formula where both the reactants and the products have the same amount of atoms of each kind. The law of conservation of mass stipulates that mass cannot be generated or destroyed, hence a chemical equation must always be in balance.

The balanced chemical equation are

[tex]\rm 4NH_3 + 3O_2 \rightarrow 2N_2 + 6H_2O[/tex]

[tex]\rm C_4H_1_0+ 5O_2 \rightarrow 4CO_2 + 5H_2O[/tex]

[tex]\rm 2Pb(NO_3)_2 \rightarrow 2PbO + 4NO_2 + O_2[/tex]

[tex]\rm 8Al + 3Fe_3O_4 \rightarrow 4Al_2O_3 + 9Fe[/tex]

[tex]\rm Sr + 2H_2O \rightarrow Sr(OH)_2 + H_2[/tex]

Thus,  balancing the chemical equation is very important as per the law.

To  learn more about balanced chemical equation, refer to the link below:

https://brainly.com/question/28294176

#SPJ1

gravity sample work connection’s academy

PLEASE HELP AS SOON AS POSSIBLE WILL MARK BRAINIEST

Answers

Answer:

search on YT Khan academy work done by gravity

Explanation:

you will get it for sure with best explanation

mark me please on brainlest

Other Questions
Read the text of the First Amendment. Select the words that protect people's right to practice their religion the way they want.Congress shall make no law respecting an establishment of religion, or prohibiting the free exercise thereof; or abridging the freedom of speech, or ofthe press; or the right of the people peaceably to assemble, and to petition the Government for a redress of grievances.Help! I dont understand what are the components of water potential, and why is water potential important for the movement of water in plants? Find the value of k such that the system of linear equations is inconsistent.6x-12y = -72x + ky = 14 a state university hires an outside firm to develop and maintain their human resource system. this is called find the solubility product constant for lead (ii) iodide if the concentration of i- is found to be 1.25x10-3 m when the solution is saturated. In The Spirit of the Laws, Montesquieu argued which of the following? Select all that apply.Government that governs least governs best of all.All political institutions ought to conform to environmental conditions.There should be separation and balancing of the powers of government.The best form of government is a strong monarchy balanced by a weaker nobility.Christianity was solely responsible for the fall of the Roman Empire. so about computers can you tell me about bit coins and giga watts ben is asked to rate the utility he would get from reading different types of publications for the next hour. if he read a graphic novel he would get utility of 5. if he read a biography, he would get utility of 4, and if he read his economics textbook, he would get utility of 9. an economist would predict that ben will spend his next hour reading: A toy rocket is shot vertically into the air from a launching pad 7 feet above the ground with an initial velocity of 72 feet per second. The height $h$, in feet, of the rocket above the ground at t seconds after launch is given by the function h(t)=-16 t+72 t+7. How long will it take the rocket to reach its maximum height? What is the maximum height?The rocket reaches its maximum height at ? second(s) after launch.(Simplify your answer.)The maximum height reached by the object is ? feet.(Simplify your answer.) law and medical school preferences that are shown to children of wealthy and influential alumni is an example of I need help please! lily is 6 years old. which skill is she likely to be able to do now that was unlikely for her to do at 4 years of age? The difference between 2 times an angle'ssupplement and 120 is 30. Find the measure ofthe angle. A, B , C or D ???????? help 1. The following data represents the amount of time Algebra II students at NVLA prepare for their math exams. Study Time (min) 7 14 17 23 27 33 38 43 Test Score 61 54 63 65 70 69 75 77 I Find the quadratic regression model of the data. Then, predict the test score of a student who studies for 60 minutes. Show your work. what is a strength of a magnetic field for a current loop with 5 a current and diameter of 1.0 m from an electric wire? which of the following is incorrect concerning carbohydrate absorption? multiple choice end products of carbohydrate digestion are transported through the portal vein to the liver. disaccharides are digested to monosaccharides by enzymes that are attached to intestinal cells. maltose is transported through the portal vein to the liver. monosaccharides can enter the villi. Solve the system by substitution. buyers' willingness to pay in a market: a. is represented by the demand curve. cross out b. is represented by the supply curve. cross out c. explains why the demand curve is bowed-out. cross out d. explains why the demand curve is bowed in. cross out 1,1,2,3,4,5,7,9, Find the common value