Answer: depth= 1875m
Explanation: divide t by 2 because its echo it will go and come back thats why we divide it with 2
Then apply formula Depth(d)=velocity (v)/time (t)
Putting values we get ,
d=1500/0.4
d=1875m
A weightlifter lifts a 500 N barbell with no acceleration, 1.25 meters. How much work did she do in lifting the weights?(step by step)
Answer:
–625 J
Explanation:
So, we got this formula for the work
W=mgd(Cosθ)
but remember when it's liftin somethin, its work gon be against the work of gravity, so
Cos180°= –1
W=500×1.25×(–1)
W= –625 J
In the hydraulic system depicted, the cylinder on the left has a diameter of 2 inches and the cylinder on the right has a diameter of 6 inches. If 100 lbs of force was applied to the cylinder on the left, what force would be exerted on the cylinder on the right
Answer:
F2 = 900 lbs
Explanation:
From pascal principle;
F1/A1 = F2/A2
Force on cylinder at left; F1 = 100 lbs
Diameter of cylinder at left; d1 = 2 inches
Diameter of cylinder at right; d2 = 6 inches
Formula for area of top of cylinder = πr²
Thus;
Area of top of left cylinder; A = π × 2² = 4π
Area of top of right cylinder; A = π × 6² = 36π
Thus;
100/4π = F2/36π
F2 = (36π × 100)/4π
F2 = 900 lbs
effects of gravitational force
Answer:
The force that propels a toddler down a slide. The force that causes the moon to revolve around the Earth. The force that keeps Jupiter's moons located around the planet. The force from the moon that causes the tides of the ocean.
Explanation:
A Body is said to be in equilibrium when its:-
a) Acceleration is uniform
b) Speed is uniform
c) Speed and acceleration are uniform
d) Speed is uniform
I need the right answer. Please quick
Answer:
speed i uniform
Explanation:
if the speed is constant
Answer:
A
Explanation:
if it has a constant acceleration
How did the current change when the circuit was initially closed in Part 2 of this exercise? Explain your answer by referencing Panel 1 and the definitions of a capacitor and of current.
Answer:
Some current is lost.
Explanation:
Change occur in the current when the circuit was initially closed because in a closed circuit the current moves from the start towards the end of the circuit through various resistors. There is heat produced in the wire when the current flows through the circuit. Due to this heat, some of the current is lost during on his own way. Capacitor is a device used to store an electric charge, having of one or more pairs of conductors separated by an insulator. while on the other hand, electric current is a stream of charged particles, such as electrons moving through conductor or space.
& What is meant by expansion effect of heating?
Answer:
it's when heat demolished the object
A body weighs 63 N on the surface of the earth. What is the gravitational force on it due to the earth at a height of 3200 km from the earth's surface? (Radius of the earth is 6400 km)
Answer:
you are kind of better than I am I don't read much but with brainly I will be intelligent
A gas is enclosed in a confainer fitted with a piston of cross sectional area 0.10 the pressureof the gas is maintained in 8000 when hat is slowlh transferred the piston is pushed up through a distance of 4.0cm If 42j of heat is transferred to the system during expansion wht is the change im internal energy of th system
Answer:
10 Joule
Explanation:
The solution and answer are well written in the Pic above.
How much energy does it take to boil water for pasta? For a one-pound box of pasta
you would need four quarts of water, which requires 15.8 kJ of energy for every degree Celsius (°C) of temperature increase. Your thermometer measures the starting
temperature as 48°F. Water boils at 212°F.
a. [1 pts] How many degrees Fahrenheit (°F) must you raise the temperature?
b. [2 pts] How many degrees Celsius (°C) must you raise the temperature?
c. [2 pts] How much energy is required to heat the four quarts of water from
48°F to 212°F (boiling)?
Answer:
a. 164°F
b. [tex]91.\overline 1 \ ^{\circ} C[/tex]
c. [tex]140.\overline 4[/tex] kJ
Explanation:
The starting temperature of the water, T₁ = 48F
The temperature at which the water boils, T₂ = 212°F
a. The difference between the initial and the boiling water temperature, ΔT = T₂ - T₁
Therefore;
ΔT = 212°F - 48°F = 164°F
The temperature by which he temperature must be raised, ΔT = 164°F
b. 48°F = ((48 - 32)×5/9)°C = (80/9)°C = [tex]8.\overline 8 \ ^{\circ} C[/tex]
212°F = ((212 - 32)×5/9)°C = 100°C
∴ ΔT = 100°C - [tex]8.\overline 8 \ ^{\circ} C[/tex] = [tex]9.\overline 1 \ ^{\circ} C[/tex]
c. The heat capacity of the water = The heat required to increase four quartz of water by 1 °C = 15.8 kJ
∴ The heat required to raise four quartz of water by [tex]9.\overline 1 \ ^{\circ} C[/tex], ΔQ = 15.8 kJ/°C × [tex]9.\overline 1 \ ^{\circ} C[/tex] = [tex]140.\overline 4[/tex] kJ.
SINGLE CORRECT OBJECTIVE
Question 9
speed of a moving object is said to be uniform if it covers equal distances in equal interva
time.
о O
ghte
O false
Your Answer:
Next
Answer:
True
Explanation:
Formula for speed is;
Speed = distance/time
Now, if an object covers an equal distance in equal time intervals, it means the speed will remain the same.
For example if an object covers 3 m every 1 second it means speed will always be; 3/1 = 3 m/s.
Thus the statement is correct.
What is seafloor spreading
A. The formation of new ocean crust when plates spread apart
B. The movement of a continent over time
C. The movement of a tectonic plate under another plate
D. The destruction of underwater mountains by plates
Answer:
A
Explanation:
The process by which molten materials add new oceanic crust to the ocean floor.
explain the role of standard units to bring uniformity in the measurement
Answer:
We need standard unit for measurement to make our judgement more reliable and accurate. For proper dealing, measurement should be same for everybody. Thus there should be uniformity in measurement. For the sake of uniformity we need a common set of units of measurement, which are called standard units.
3.00 m^3 of water is at 20.0°C.
If you raise its temperature to
60.0°C, by how much will its
volume expand?
Water
ß = 207•10-6C-1
(Unit = m^3)
Answer:
9m^3
Explanation:
Given data
volume v1= 3m^3
volume v2= ???
Temperature T1= 20.0°C.
Temperature T2= 60.0°C.
Applying the relation for temperature and volume
V1/T1= V2/T2
substitute
3/20= V2/60
3*60= V2*20
180= 20*V2
180/20= V2
V2= 9m^3
Hence the final volume is 9m^3
The Sun is an enormous ball of gas. Left to itself, a ball of so many atoms should collapse under its own tremendous gravity. Why is our Sun not collapsing
Answer:
Nuclear fusion in the Sun's core causes the release of tremendous amounts of energy that leads to very high temperatures and pressure which is much hotter and higher than the temperature and pressure at the exterior surface of the Sun causing the particles in the inner core region to push outwards towards the Sun's surface
Explanation:
What is matter made of.
Answer:
Matter is made up of atoms
Answer:
Mater is made up of atoms.
Explanation:
Atoms come together to form molecules,which are the building blocks for all types of matter.
If a car is moving on a straight line with a velocity of 40 m/s and it changes its velocity to 60 m/s in 4 seconds, calculate its acceleration.
Answer:
5m/s²
Explanation:
Initial Velocity= 40m/s
Final Velocity=60m/s
Time = 4s
a=(v-u)/t
a=60-40/4
a=20/4
a=5m/s²
Select the correct answer. The motion of a car on a position-time graph is represented with a horizontal line. What does this indicate about the car’s motion? A. It’s not moving. B. It’s moving at a constant speed. C. It’s moving at a constant velocity. D. It’s speeding up.
If the car's motion appears as a horizontal line on a position-time graph, it shows that as time changes, the car's position doesn't change.
This is just a complicated way to say that the car is not moving. (A)
Answer: It's not moving.
Explanation:
I got it correct on edmentum.
The weight of a body is 600 N. What is the mass of the body on the surface of the earth?
Explanation:
soln,
weight=600N
mass=?
gravity=9.8 m/s²
now,
mass=weight/gravitymass=600/9.8mass=61.22kghope it helps.
stay safe healthy and happy.Answer:
m = 61.22 kg
Explanation:
F = 600 N
g = 9.8 m/s²
m = ?
F = mg
600 = m(9.8)
---> m = 61.22 kg
Refer to the periodic table above a student is asked
Answer:
there is no context??????
A particle is moving on a circular path of radius R. What will be its displacement and distance covered after 3 ½ round?
(please help fast)
Answer:
2r or diameter
Explanation:
After 3 1/2 rounds it will end up on the other side of the circle and displacement will be 2 x the radius = d
Distance = 7 π R
Displacement = 2 R from the starting point directed through the center of the circle
If a planet has the same mass as the earth, but has twice the radius, how does the surface gravity, g, compare to g on the surface of the earth
Answer:
The surface gravity g of the planet is 1/4 of the surface gravity on earth.
Explanation:
Surface gravity is given by the following formula:
[tex]g=G\frac{m}{r^{2}}[/tex]
So the gravity of both the earth and the planet is written in terms of their own radius, so we get:
[tex]g_{E}=G\frac{m}{r_{E}^{2}}[/tex]
[tex]g_{P}=G\frac{m}{r_{P}^{2}}[/tex]
The problem tells us the radius of the planet is twice that of the radius on earth, so:
[tex]r_{P}=2r_{E}[/tex]
If we substituted that into the gravity of the planet equation we would end up with the following formula:
[tex]g_{P}=G\frac{m}{(2r_{E})^{2}}[/tex]
Which yields:
[tex]g_{P}=G\frac{m}{4r_{E}^{2}}[/tex]
So we can now compare the two gravities:
[tex]\frac{g_{P}}{g_{E}}=\frac{G\frac{m}{4r_{E}^{2}}}{G\frac{m}{r_{E}^{2}}}[/tex]
When simplifying the ratio we end up with:
[tex]\frac{g_{P}}{g_{E}}=\frac{1}{4}[/tex]
So the gravity acceleration on the surface of the planet is 1/4 of that on the surface of Earth.
What is pulling force? Give any two examples.,
Answer:
Push or Pull Forces - example
When you push against a wall the force that you exert is an example of a push force. When you pull a trolley car the force that you exert is an example of pull force.
A train is travelling at 50 m s−1 when the driver applies the brakes and gives the train a constant deceleration of magnitude 0.50 m s−2 for 100 s. Describe what happens to the train. Calculate the distance travelled
Answer:
The strain will come to rest after traveling some distance.
distance traveled = 2500 m
Explanation:
The strain will come to rest after traveling some distance.
Applying,
s = ut+at²/2................... Equation 1
Given: u = initial velocity, a = deceleration, t = time, s = distance
From the question,
Given: u = 50 m/s, t = 100s, a = -0.5 m/s²(deceleration)
Substitute these values into equation 1
s = 50(100)+(-0.5)(100²)/2
s = 5000-2500
s = 2500 m
Hence the distance traveled is 2500 m
Define equilibrium and explain first condition of equilibrium. Pease make it fast...
Answer:
First Condition of Equilibrium
For an object to be in equilibrium, it must be experiencing no acceleration. This means that both the net force and the net torque on the object must be zero. Here we will discuss the first condition, that of zero net force. ... Fnet=0 F net = 0.
Why Newton's law of gravitation also called universal law?
Answer:
Explanation:
Newton's law of gravitation states that every particle of matter attracts any other particle in the universe with a force directly proportional to the product of there masses and inversely proportional to the square of the distance between them.
This law is also called universal law because it is applicable to all masses at all distances irrespective of the medium.
The area of a position-time graph is the
Answer:
mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm
Explanation:
..........
please help me with this question
Answer:
1. 12 V
2a. R₁ = 4 Ω
2b. V₁ = 4 V
3a. A = 1.5 A
3b. R₂ = 4 Ω
4. Diagram is not complete
Explanation:
1. Determination of V
Current (I) = 2 A
Resistor (R) = 6 Ω
Voltage (V) =?
V = IR
V = 2 × 6
V = 12 V
2. We'll begin by calculating the equivalent resistance. This can be obtained as follow:
Voltage (V) = 12 V
Current (I) = 1 A
Equivalent resistance (R) =?
V = IR
12 = 1 × R
R = 12 Ω
a. Determination of R₁
Equivalent resistance (R) = 12 Ω
Resistor 2 (R₂) = 8 Ω
Resistor 1 (R₁) =?
R = R₁ + R₂ (series arrangement)
12 = R₁ + 8
Collect like terms
12 – 8 =
4 = R₁
R₁ = 4 Ω
b. Determination of V₁
Current (I) = 1 A
Resistor 1 (R₁) = 4 Ω
Voltage 1 (V₁) =?
V₁ = IR₁
V₁ = 1 × 4
V₁ = 4 V
3a. Determination of the current.
Since the connections are in series arrangement, the same current will flow through each resistor. Thus, the ammeter reading can be obtained as follow:
Resistor 1 (R₁) = 4 Ω
Voltage 1 (V₁) = 6 V
Current (I) =?
V₁ = IR₁
6 = 4 × I
Divide both side by 4
I = 6 / 4
I = 1.5 A
Thus, the ammeter (A) reading is 1.5 A
b. Determination of R₂
We'll begin by calculating the voltage cross R₂. This can be obtained as follow:
Total voltage (V) = 12 V
Voltage 1 (V₁) = 6 V
Voltage 2 (V₂) =?
V = V₁ + V₂ (series arrangement)
12 = 6 + V₂
Collect like terms
12 – 6 = V₂
6 = V₂
V₂ = 6 V
Finally, we shall determine R₂. This can be obtained as follow:
Voltage 2 (V₂) = 6 V
Current (I) = 1.5 A
Resistor 2 (R₂) =?
V₂ = IR₂
6 = 1.5 × R₂
Divide both side by 1.5
R₂ = 6 / 1.5
R₂ = 4 Ω
4. The diagram is not complete
If your weight is 588N on the earth, how far should you go from the centre of the earth so that your weight will be 300N? The radius of the earth is 6400km and the value of g on the earth surface is 9.8m/s2. please explain....
Answer:
Explanation:
You need something that relates distance to what the gravitational pull is. You can set up a complex sort of proportion. What you need is a number that is comparable to 9.81 or you can just use the Gravitational Force formula with a 4 tier fraction.
Givens
x = the additional distance toward outer space above the radius of the earth.
G is the gravitational constant.
m1 = the person's mass (which does not change no matter where you are).
m2 = the earth's mass
F1 = 588 N
F2 = 300 N
Formula
[tex]\frac{F1}{F2} = \frac{588 N}{300N}=\frac{\frac{Gm1*m2/}{6400^2} }{\frac{G*m1*m2}{(6400 + x)^2} }[/tex]
Solution
G*m1*m2 all cancel. So what you get looks like this.
[tex]\frac{588}{300} = \frac{(6400 + x)^2}{6400^2}[/tex]
Cross Multiply
588 * 6400^2 = 300*(6400+x)^2 Now all you need do is solve for x.
x will be in km.
588*40960000 = 300 * (40960000 + 12800x + x^2)
1.2288*10^10 + 3840000x + 300x^2 = 2.408448*10^10
300x^2 + 3840000x + 1.2288*10^10 = 2.408448 * 10^10
Subtract 2.409448 * 10^10 from both sides.
300x^2 + 3840000x - 1,179648 * 10^10
Now use the quadratic formula
I'm guessing I should have converted this to meters because I'm getting ridiculous numbers. They are already large enough as you can see. The method is correct, even if the numbers are not.
Sonny took 16 seconds to finish a 100-m race. What was
Sonny's average speed in the race
Speed = Distance/Time
=> Speed = 100m/16s
=> Speed = 6.25m/s
=> Speed = 6.25 ms^-1
how to Calculate the pressure on its base.
Answer:
p is =force x 10 whch is constant
