A small math department has five faculty members and 40 students. The department can send six people to a national convention, and it would like to send four students and two faculty members. Of the 40 students, four are selected randomly. Two faculty members are randomly selected from the five. This is an example of:

Select one:

voluntary response sampling.

a census.

simple random sampling.

stratified random sampling.

Answers

Answer 1

The given scenario is an example of stratified random sampling.

Stratified random sampling is a sampling method that involves dividing a population into non-overlapping groups or strata based on a specific characteristic. Random samples are then collected from each stratum to ensure representation from all segments of the population.

In this case, the population is divided into two strata: faculty members and students. This division is based on the characteristic of belonging to either group. The purpose of stratifying the population is to ensure that both faculty members and students have a chance to be represented in the sample.

From each stratum, a random sample is taken. Two faculty members and four students are randomly selected to attend the national convention. By randomly selecting individuals from each stratum, the sample reflects the diversity within the population.

Stratified random sampling is particularly useful when there are important subgroups within a population that have different characteristics or attributes. By ensuring representation from each subgroup, it allows for more accurate inferences and conclusions to be drawn about the population as a whole.

To know more about stratified random sampling, refer here:

https://brainly.com/question/15604044#

https://brainly.com/question/4468092#

#SPJ11


Related Questions

a conveyor belt carries supplies from the first floor to the second floor, which is 12 feet higher. the belt makes a 60 angle with ground. how far does the supplies

Answers

Therefore, the supplies travel approximately 6.928 feet horizontally on the conveyor belt.

To determine how far the supplies travel horizontally on the conveyor belt, we can use trigonometry.

Given that the second floor is 12 feet higher and the belt makes a 60-degree angle with the ground, we can consider the vertical distance (rise) as the opposite side and the horizontal distance (run) as the adjacent side of a right triangle.

Using the trigonometric function tangent (tan), we can calculate the horizontal distance:

tan(60 degrees) = opposite/adjacent

tan(60 degrees) = 12 feet/run

Rearranging the equation to solve for run:

run = 12 feet / tan(60 degrees)

run ≈ 12 feet / 1.732 (rounded to three decimal places)

run ≈ 6.928 feet (rounded to three decimal places)

To know more about conveyor belt,

https://brainly.com/question/1550732

#SPJ11

Use Excel to find the z-scores that bound the middle 82% of the
area under the standard normal curve. Enter the answers in
ascending order. Round the answers to two decimal places. The
z-scores for t

Answers

The z-scores that bound the middle 82% of the area under the standard normal curve are -1.34 and 1.34, entered in ascending order.

Given :The middle 82% of the area under the standard normal curve. Ascending order. Round the answers to two decimal places. So, we can solve this by using Excel. We know that the middle 82% of the area is the region between the z-scores whose cumulative probabilities are 9%2 = 91% on either side. Using the formula =NORM.INV(probability) for the inverse cumulative distribution function of the standard normal distribution, we can find the corresponding z-scores. The z-score at the 9th percentile is =NORM.INV(0.09) = -1.34 (rounded to two decimal places)The z-score at the 91st percentile is =NORM.INV(0.91) = 1.34 (rounded to two decimal places)

Know more about z-scores here:

https://brainly.com/question/30557336

#SPJ11

Please help!
Write the equation that describes the simple harmonic motion of a particle moving uniformly around a circle of radius 7 units, with angular speed 2 radians per second.

Answers

The equation that describes the simple harmonic motion of the particle is:

x = 7 * sin(2t + φ)

The equation that describes the simple harmonic motion of a particle moving uniformly around a circle can be represented as:

x = A * sin(ωt + φ)

In this equation:

x represents the displacement of the particle at time t.

A represents the amplitude of the motion.

ω represents the angular frequency or angular speed of the motion.

t represents time.

φ represents the phase constant.

In the given scenario, the particle is moving uniformly around a circle of radius 7 units, with an angular speed of 2 radians per second. In circular motion, the displacement can be represented by the arc length along the circumference of the circle.

Since the angular speed is 2 radians per second, the angular frequency (ω) is also 2 radians per second.

Since the particle is moving uniformly, the amplitude of the motion (A) is equal to the radius of the circle, which is 7 units.

The phase constant (φ) determines the initial position of the particle at t = 0.

for more such questions on harmonic motion

https://brainly.com/question/29159741

#SPJ8

Car repairs: Let E be the event that a new car requires engine work under warranty and let T be the event that the car requires transmission work under warranty. Suppose that P(E)=0.04, P(T) -0.1, P(E and T) -0.03. (a) Find the probability that the car needs work on either the engine, the transmission, or both.
(b) Find the probability that the car needs no work on the transmission. Part 1 of 2 (a) Find the probability that the car needs work on either the engine, the transmission, or both. The probability that the car needs work on either the engine, the transmission, or both is Part 2 of 2
(b) Find the probability that the car needs no work on the transmission. The probability that the car needs no work on the transmission is

Answers

The probability that the car needs no work on the transmission is 0.9.


Given: Let E be the event that a new car requires engine work under warranty, P(E) = 0.04

Let T be the event that the car requires transmission work under warranty, P(T) = 0.1

P(E and T) = 0.03

(a) Find the probability that the car needs work on either the engine, the transmission, or both.

We know that, P(E or T) = P(E) + P(T) - P(E and T)

Putting the values, we get:P(E or T) = 0.04 + 0.1 - 0.03 = 0.11

Therefore, the probability that the car needs work on either the engine, the transmission, or both is 0.11.


(b) Find the probability that the car needs no work on the transmission.

The probability that the car needs no work on the transmission is given by:P(not T) = 1 - P(T)

Substituting P(T) = 0.1, we get:

P(not T) = 1 - 0.1 = 0.9

Therefore, the probability that the car needs no work on the transmission is 0.9.

Know more about the probability

https://brainly.com/question/25839839

#SPJ11

be f(x) = x^2/3 when -1 0 in any other part
a.- Is it a positive function?
b.- check if the integral from +[infinity] to -[infinity] of f(x)dx =1
c.- Is it a probability density function?
d.- found P[0&

Answers

(a) The function f(x) = x²/3 is a positive function.

(b) The integral from -∞ to ∞ does not converge to 1. Therefore, the integral from +[infinity] to -[infinity] of f(x)dx ≠ 1.

a) Is it a positive function?

Yes, f(x) = x²/3 is a positive function.

The square of a number is always positive. And a positive value divided by a positive value will also yield a positive value.

Therefore, the function f(x) = x²/3 is a positive function.

b) Check if the integral from +[infinity] to -[infinity] of f(x)dx =1Since the function is not defined at x = 0, we must find the integral of the function for two separate intervals: from -∞ to -1 and from -1 to

∞.∫[−∞,−1]f(x)dx=∫[−∞,−1](x2/3)dx

= 3/5∫[−∞,∞]f(x)dx

= ∫[−∞,−1](x2/3)dx + ∫[−1,∞](x2/3)dx

=3/5 + 3/5

=6/5

However, the integral from -∞ to ∞ does not converge to 1. Therefore, the integral from +[infinity] to -[infinity] of f(x)dx ≠ 1.

Know more about the function here:

https://brainly.com/question/22340031

#SPJ11

The diameter of a hat is 6.8 inches. What is the distance around the hat using π = 3.14? Round to the hundredths place.
a.2.17 inches
b.10.68 inches
c.21.35 inches
d.36.29 inches

Answers

the distance around the hat is (c) 21.35 inches.

The distance around a hat can be calculated using the formula for the circumference of a circle:

Circumference = π * diameter

Given that the diameter of the hat is 6.8 inches and using the value of π = 3.14, we can calculate the distance around the hat as:

Circumference = 3.14 * 6.8

Circumference ≈ 21.352 inches

Rounding to the hundredths place, the distance around the hat is approximately 21.35 inches.

Therefore, the correct answer is (c) 21.35 inches.

what is Circumference?

In mathematics, the circumference is the distance around the boundary of a closed curve or shape, such as a circle. It is the measure of the total length of the curve. For a circle, the circumference is calculated using the formula:

Circumference = π * diameter

where π is a mathematical constant approximately equal to 3.14159 (often rounded to 3.14), and the diameter is the length of a straight line passing through the center of the circle and connecting two points on its boundary.

The circumference is an important measurement used in various geometric calculations, such as determining the perimeter of a circle or the length of a curved line segment.

To know more about circumference visit:

brainly.com/question/23881522

#SPJ11

Use the product property of roots to choose the expression equivalent to _____.
a. √(ab)
b. √a + √b
c. √a - √b
d. √(a + b)

Answers

Product Property of Roots The product property of roots states that the square root of the product of two numbers is equal to the product of their square roots. In other words, for any non-negative numbers a and b, the square root of the product of a and b equals the product of the square roots of a and b.

The equivalent expression to √(ab) using the product property of roots is √a * √b. The reason is that by definition of the product property of roots, the square root of the product of a and b is equal to the square root of a multiplied by the square root of b, that is, √(ab) = √a * √b. Therefore, the correct answer is option A, which is √(ab).

To know more about square root  visit :-

https://brainly.com/question/29286039

#SPJ11

determine whether the series ∑3 sin(k)4k2 converges or diverges.

Answers

Here's the LaTeX representation of the explanation:

To determine whether the series [tex]$\sum \frac{3 \sin(k)}{4k^2}$[/tex] converges or diverges, we can use the comparison test or the limit comparison test.

Let's use the limit comparison test with the series [tex]$\sum \frac{1}{k^2}$.[/tex]

Taking the limit as [tex]$k$[/tex] approaches infinity of the ratio of the two series, we have:

[tex]\[\lim_{k \to \infty} \left[ \frac{\frac{3 \sin(k)}{4k^2}}{\frac{1}{k^2}} \right]\][/tex]

Simplifying, we get:

[tex]\[\lim_{k \to \infty} \left[ \frac{3 \sin(k) \cdot k^2}{4} \right]\][/tex]

Since the limit of [tex]$\sin(k)$ as $k$[/tex] approaches infinity does not exist, the limit of the ratio also does not exist. Therefore, the limit comparison test is inconclusive.

In this case, we can try using the direct comparison test by comparing the given series with a known convergent or divergent series.

For example, we can compare the given series with the series [tex]$\sum \frac{1}{k^2}$.[/tex] Since [tex]$\sin(k)$[/tex] is bounded between -1 and 1, we have:

[tex]\[\left| \frac{3 \sin(k)}{4k^2} \right| \leq \frac{3}{4k^2}\][/tex]

The series  [tex]$\sum \frac{3}{4k^2}$[/tex]  is a convergent  [tex]$p$[/tex] -series with [tex]$p = 2$[/tex]. Since the given series is smaller in magnitude, it must also converge.

Therefore, the series  [tex]$\sum \frac{3 \sin(k)}{4k^2}$[/tex] converges.

To know more about convergent visit-

brainly.com/question/17156453

#SPJ11

The diagram below shows different layers of sedimentary rocks.
Based on the diagram, which of these inferences is most likely correct?
Layer F was formed earlier than Layer A.
Layer B was formed earlier than Layer E.
Layer G was formed more recently than Layer D.
Layer D was formed more recently than Layer C.

Answers

In conclusion, the most likely correct inference based on the given diagram is that Layer D was formed more recently than Layer C.

The diagram below shows different layers of sedimentary rocks, and based on the diagram, the most likely correct inference is that Layer D was formed more recently than Layer C.

Explanation: The layers of sedimentary rocks on the diagram are given as follows: A, B, C, D, E, F, and G. The principle of superposition states that sedimentary layers are older at the bottom than they are at the top of a rock formation.

As a result, we can infer the relative ages of these layers based on their order and position. Layer C is found underneath layer D and the Principle of Superposition applies.

Therefore, we can conclude that Layer D was formed more recently than Layer C.

To Know more about Principle of Superposition visit:

https://brainly.com/question/30780170

#SPJ11

The marketing product life cycle postulates that sales
of a new product will increase for a while and then decrease.
Specify the following five inputs:
Year 1 sales
years of growth
years of decline
A

Answers

The five inputs for the marketing product life cycle are: Year 1 sales, Years of growth, Years of decline, Peak sales, Product life cycle stages

Year 1 sales: This refers to the initial sales volume or revenue generated by the new product in its first year of introduction.

Years of growth: This represents the duration or number of years during which the sales of the product are expected to increase. It indicates the period of growth and market acceptance for the product.

Years of decline: This indicates the duration or number of years during which the sales of the product are expected to decline. It represents the period when the product starts losing market share or becomes less popular due to various factors such as competition, saturation, or changing consumer preferences.

Peak sales: This refers to the highest point or maximum level of sales that the product achieves during its life cycle. It usually occurs during the growth phase when the product is at its peak popularity and demand.

Product life cycle stages (optional): The marketing product life cycle typically consists of four stages - introduction, growth, maturity, and decline. These stages describe the overall pattern of sales and market behavior over the lifespan of a product. Including the stage durations or estimated time periods for each stage can provide further insights into the expected sales trends and dynamics of the product.

Learn more about product life cycle here:

brainly.com/question/7510515

#SPJ4

find the expected value and the population variance of the sample mean µˆ in a sample of n independent observations, with µˆ = (1/n) ∑ n i=1 yi .

Answers

The expected value of the sample mean, denoted as E(µ), is equal to the population mean µ, while the population variance of the sample mean, denoted as Var(µˆ), is equal to the population variance σ² divided by the sample size n. Therefore, the expected value of the sample mean is µ, and the population variance of the sample mean is σ²/n.

The expected value (mean) of the sample mean, denoted as E(µ), is equal to the population mean µ. In other words, E(µ) = µ.

The population variance of the sample mean, denoted as Var(µ), is equal to the population variance σ² divided by the sample size n. In other words, Varµ) = σ²/n.

So, to summarize:

Expected value of the sample mean: E(µ) = µ

Population variance of the sample mean: Var(µ) = σ²/n

To know more about population variance,

https://brainly.com/question/30611835

#SPJ11

a rectangles perimeter is 28 meters and it's area is 46 square meters how long is it's longest side

Answers

Answer:

  7+√3 ≈ 8.732 meters

Step-by-step explanation:

Given a rectangle with a perimeter of 28 meters and an area of 46 square meters, you want to know the length of the longest side.

Perimeter

The sum of the lengths of two adjacent sides is (28 m)/2 = 14 m.

Area

We can use this relation in the area formula. For longest side x, we have ...

  A = LW

  46 = x(14 -x)

  x² -14x = -46 . . . . . multiply by -1, simplify

  (x -7)² = -46 +49 . . . . add 49 to complete the square

  x = 7 +√3 . . . . . . . take the positive square root, add 7

The longest side is 7+√3 ≈ 8.732 meters.

<95141404393>

A rectangle with perimeter is 28 meters and area is 46 square metersthen the longest side of the rectangle is 11 meters.

Let's assume the length of the rectangle is L meters and the width is W meters. The perimeter of a rectangle is given by the formula P = 2L + 2W. In this case, we are given that the perimeter is 28 meters, so we can write the equation as 28 = 2L + 2W.

The area of a rectangle is given by the formula A = L× W. In this case, we are given that the area is 46 square meters, so we can write the equation as 46 = L×W.

We can solve these two equations simultaneously to find the values of L and W. Rearranging the perimeter equation, we get 2L = 28 - 2W, which simplifies to L = 14 - W. Substituting this value into the area equation, we have 46 = (14 - W)× W.

Simplifying further, we get [tex]46 = 14W - W^2[/tex]. Rearranging this equation, we have [tex]W^2 - 14W + 46 = 0[/tex]. Solving this quadratic equation, we find that W = 7 ± √(3). Since the width cannot be negative, we take W = 7 + √(3).

Substituting this value back into the perimeter equation, we get

28 = 2L + 2(7 + √(3)). Solving for L, we find L = 7 - √(3).

Therefore, the longest side of the rectangle is the length, which is approximately 11 meters.

Learn more about rectangles here:

https://brainly.com/question/28993977

#SPJ11

1. When Ayla improves her game of darts the chances that a she hits a bullseye is 0.65. Assume that each throw is independent. a) What are the chances that three darts fired in succession will all hit

Answers

The probability of all three darts hitting the bullseye in succession would be found by multiplying the probability of hitting the bullseye on the first dart, second dart and third dart.

The probability of hitting the bullseye on each dart is 0.65, so the probability of all three darts hitting bullseye would be found using the multiplication rule:

P(all three darts hit bullseye) = P(first dart hits bullseye) * P(second dart hits bullseye) * P(third dart hits bullseye) = 0.65 * 0.65 * 0.65 = 0.274625 or 0.275 approximated to 3 decimal places.

Therefore, the probability that all three darts fired in succession will all hit the bullseye is 0.275.

Summary:The probability of all three darts hitting the bullseye in succession would be found by multiplying the probability of hitting the bullseye on the first dart, second dart, and third dart. Therefore, the probability that all three darts fired in succession will all hit the bullseye is 0.275.

Learn more about probability click here:

https://brainly.com/question/13604758

#SPJ11

There is a raffle booth at the fair. The probability of winning
a ticket is 0.050.
Annika buys a new lottery ticket until she has her first win.
How likely is she to buy 19 tickets?
Tommy buys 16 tick

Answers

The likelihood of Annika buying 19 tickets until she wins is approximately 0.4877, and the likelihood of Tommy buying 16 tickets until he wins is approximately 0.5488.

To determine the likelihood of Annika buying 19 tickets and Tommy buying 16 tickets until they each have their first win, we need to calculate the probabilities of these specific scenarios occurring.

For Annika:

The probability of Annika winning on any given ticket is 0.050.

The probability of Annika not winning on any given ticket is 1 - 0.050 = 0.950.

The likelihood of Annika buying 19 tickets until she wins can be calculated as the probability of not winning on the first 18 tickets (0.950^18) multiplied by the probability of winning on the 19th ticket (0.050).

P(Annika buys 19 tickets) = (0.950^18) * 0.050

For Tommy:

The probability of Tommy winning on any given ticket is also 0.050.

The probability of Tommy not winning on any given ticket is 1 - 0.050 = 0.950.

The likelihood of Tommy buying 16 tickets until he wins can be calculated as the probability of not winning on the first 15 tickets (0.950^15) multiplied by the probability of winning on the 16th ticket (0.050).

P(Tommy buys 16 tickets) = (0.950^15) * 0.050

Calculating these probabilities:

P(Annika buys 19 tickets) ≈ 0.950^18 * 0.050 ≈ 0.4877

P(Tommy buys 16 tickets) ≈ 0.950^15 * 0.050 ≈ 0.5488

Therefore, the likelihood of Annika buying 19 tickets until she wins is approximately 0.4877, and the likelihood of Tommy buying 16 tickets until he wins is approximately 0.5488.

Learn more about likelihood here

https://brainly.com/question/30390037

#SPJ11

Dew is the average time to complete an obstacle course different when a patch is placed over the right e than when a patch is placed over the left eye? Thirteen randomly selected volunteers first complete obstacle course with a patch over one eye and then completed an equally difficult obstacle course w patch over the other eye. The completion times are shown below. Left" means the patch was placed the left eye and "Right means the patch was placed over the right eye. Time to Complete the Course Right 50 41 48 44 46 40 40 45 Left 48 41 48 40 44 35 40 40 Assume a Normal distribution. What can be concluded at the the ar-0.01 level of significance level o significance? For this study, we should use test for the difference between two dependent population means a. The null and alternative hypotheses would be: Het p OVO please enter a decimal) (Please enter a decimal 2188 H₁ 9443 esc Cab es lock b. The test statistic d c. The p-value d. The p-value is P control ! 1 Q A E ri

Answers

The conclusion is: "Reject the null hypothesis."

To determine whether the average time to complete an obstacle course differs when a patch is placed over the right eye compared to when a patch is placed over the left eye, we can perform a paired t-test.

H₀ (null hypothesis): μd = 0 (the mean difference is zero)

Hₐ (alternative hypothesis): μd ≠ 0 (the mean difference is not equal to zero)

The test statistic for this analysis is a t-test because the sample size is small (n = 8) and we assume a normal distribution.

To calculate the test statistic and p-value, we need to compute the differences in completion times for each volunteer and then perform a one-sample t-test on these differences.

The differences between completion times (Right - Left) are as follows:

2 0 0 4 2 5 0 5

Calculating the mean (xd) and standard deviation (sd) of the differences:

xd = (2 + 0 + 0 + 4 + 2 + 5 + 0 + 5) / 8 = 2.5

sd = √[(Σ(xd - xd)²) / (n - 1)]

= √[(2-2.5)² + (0-2.5)² + (0-2.5)² + (4-2.5)² + (2-2.5)² + (5-2.5)² + (0-2.5)² + (5-2.5)²] / (8-1)

= √[0.25 + 6.25 + 6.25 + 2.25 + 0.25 + 6.25 + 6.25 + 2.25] / 7

= √(30.75 / 7)

≈ √4.393

≈ 2.096

The test statistic (t) is calculated as t = (xd - μd) / (sd / √n)

In this case, μd is assumed to be zero.

t = (2.5 - 0) / (2.096 / √8)

≈ 2.5 / (2.096 / 2.828)

≈ 2.5 / 0.741

≈ 3.374

Looking up the p-value corresponding to this t-value and 7 degrees of freedom in a t-distribution table or using a calculator, we find that the p-value is approximately 0.023 (rounded to three decimal places).

At the 0.01 level of significance, since the p-value (0.023) is less than the significance level (0.01), we reject the null hypothesis.

Therefore, the conclusion is: "Reject the null hypothesis."

Learn more about hypothesis test click;

https://brainly.com/question/17099835

#SPJ4

what is the distance from the point (12, 14, 1) to the y-z plane?

Answers

The problem involves finding the distance from a given point (12, 14, 1) to the y-z plane. The distance can be determined by finding the perpendicular distance from the point to the plane.

The equation of the y-z plane is x = 0, as it does not depend on the x-coordinate. We need to calculate the perpendicular distance between the point and the plane.

To find the distance from the point (12, 14, 1) to the y-z plane, we can use the formula for the distance between a point and a plane. The formula states that the distance d from a point (x₀, y₀, z₀) to a plane Ax + By + Cz + D = 0 is given by the formula:

d = |Ax₀ + By₀ + Cz₀ + D| / √(A² + B² + C²)

In this case, since the equation of the y-z plane is x = 0, the values of A, B, C, and D are 1, 0, 0, and 0 respectively. Substituting these values into the formula, we can calculate the distance from the point to the y-z plane.

To know more about distances  click here: brainly.com/question/31713805  

#SPJ11

A psychologist would like to know whether the season (autumn, winter, spring, and summer) has any consistent effect on people's sexual activity. In the middle of each season, a psychologist selects a random sample of 19 students. Each individual is given a sexual activity questionnaire. A one-factor ANOVA was used to analyze these data. Complete the following, ANOVA summary table (o= 0.01). Source SS df MS F P Between 288.618 x 3 96.206 x 3.847 5.417 Within 15 x 25.008 TOTAL 18 X Add Work Submit Part 375.12 663.738

Answers

The ANOVA summary table (o= 0.01) would be as follows: Source SS d f MS F P Between 288.618 3 96.206 3.847 0.0285Within 375.12 15 25.008 Total 663.738 18 Explanation :In this question, we are given that a psychologist would like to know whether the season (autumn, winter, spring, and summer) has any consistent effect on people's sexual activity.

In the middle of each season, a psychologist selects a random sample of 19 students. Each individual is given a sexual activity questionnaire. A one-factor ANOVA was used to analyze these data .In order to complete the ANOVA summary table, we need to know the values of SS,  d f , MS, F and P for the between-group and within-group variations :SS (sum of squares) - It is the sum of squared deviations of the individual observations from the mean of the sample.

It is a measure of variation .DF (degrees of freedom) - It is the number of observations that are free to vary after the estimate of a population parameter has been obtained. It is a measure of the sample size.MS (mean square) - It is the sum of squares divided by the degrees of freedom .F - It is the ratio of variation between groups to the variation within groups .P - It is the probability of obtaining a test statistic as extreme or more extreme than the one observed if the null hypothesis were true. It measures the significance level of the test.

To know more about ANOVA visit :

https://brainly.com/question/29537928

#SPJ11

A ski gondola carries skiers to the top of a mountain. Assume that weights of skiers are normally distributed with a mean of 199 lb and a standard deviation of 45 lb. The gondola has a stated capacity of 25 passengers, and the gondola is rated for a load limit of 3750 lb. Complete parts (a) through (d) below. a. Given that the gondols is rated for a load limit of 3750 lb, what is the maximum mean weight of the passengers if the gondola is filled to the stated capacity of 25 passengers? The maximum mean weight is lb. (Type an integer or a decimal. Do not round.)

Answers

150lb is the maximum mean weight of the passengers if the gondola is filled to the stated capacity of 25 passengers.

Given that the gondola is rated for a load limit of 3750 lb, the maximum mean weight of the passengers if the gondola is filled to the stated capacity of 25 passengers can be calculated as follows:

The maximum load that the gondola can handle is:

3750 lb = 25 passengers × mean weight per passenger

This gives the mean weight per passenger as:

Mean weight per passenger = 3750/25 = 150

Therefore, the maximum mean weight of the passengers if the gondola is filled to the stated capacity of 25 passengers is 150 lb.

To learn more about mean, refer below:

https://brainly.com/question/31101410

#SPJ11

please help with both parts
1. 50 water samples were taken at random and analyzed for pH. The table below represents the frequency distribution. PH Frequency Event A: 5.00 5.10 11 Event B: 5.10 < 5.20 5 Event C: 5.20 < 5.30 11 E

Answers

To calculate the probability for each event, we need to determine the relative frequency of each event by dividing the frequency of each event by the total number of samples (50 in this case).

Let's calculate the probability for each event:

Event A: pH 5.00 - 5.10 (Frequency: 11)

P(Event A) = Frequency of Event A / Total number of samples

P(Event A) = 11 / 50 = 0.22

Event B: pH 5.10 - 5.20 (Frequency: 5)

P(Event B) = Frequency of Event B / Total number of samples

P(Event B) = 5 / 50 = 0.10

Event C: pH 5.20 - 5.30 (Frequency: 11)

P(Event C) = Frequency of Event C / Total number of samples

P(Event C) = 11 / 50 = 0.22

Event D: pH 5.30 - 5.40 (Frequency: 10)

P(Event D) = Frequency of Event D / Total number of samples

P(Event D) = 10 / 50 = 0.20

Event E: pH > 5.40 (Frequency: 13)

P(Event E) = Frequency of Event E / Total number of samples

P(Event E) = 13 / 50 = 0.26

The probabilities for each event are as follows:

P(Event A) = 0.22

P(Event B) = 0.10

P(Event C) = 0.22

P(Event D) = 0.20

P(Event E) = 0.26

These probabilities represent the likelihood of randomly selecting a water sample that falls within each respective pH range.

To know more about probabilities visit-

brainly.com/question/32758775

#SPJ11

what is the probability that in a given game the lions will score at least 1 goal?
A. 0.20
B. 0.55
C. 1.0
D. 0.95

Answers

The limit of g(x) as x approaches infinity is 2.

Given the slope field for the differential equation dy/dx = y^2(4 - y^2), we are interested in finding the behavior of the solution g(x) as x approaches infinity.

Looking at the slope field, we observe that as y approaches 2, the slope of the solution curve becomes steeper. This suggests that as x increases, g(x) approaches a horizontal asymptote at y = 2.

Since the initial condition g(-2) = -1 is below the asymptote at y = 2, the solution curve must approach the asymptote from below. As x approaches infinity, g(x) gets closer and closer to the asymptote at y = 2, indicating that the limit of g(x) as x approaches infinity is 2.

So, the correct answer is D. 2.

Learn more about Probability

brainly.com/question/31828911

#SPJ11

Find the 3rd cumulant of a discrete random variable that has
probability generating function G(z) = z^3 /z^3−8(z−1) .
Find the 3rd cumulant of a discrete random variable that has probability generating function G(2) = 23-8(2-1) z³–8(z−1) ·

Answers

The answer is 6.

To find the 3rd cumulant of a discrete random variable with the given probability generating function G(z), we can use the relationship between cumulants and the derivatives of the logarithm of the probability generating function.

The kth cumulant (K_k) is related to the kth derivative of the logarithm of the probability generating function (ln(G(z))) evaluated at z=1. Specifically:

K_k = ln(G(z))|z=1^(k)

In this case, we need to find the 3rd cumulant (K_3). Let's start by finding the logarithm of the probability generating function:

ln(G(z)) = ln(z^3 / (z^3 - 8*(z-1)))

To simplify the expression, we can use the logarithm properties:

ln(G(z)) = ln(z^3) - ln(z^3 - 8*(z-1))

ln(G(z)) = 3ln(z) - ln(z^3 - 8*(z-1))

Now, let's calculate the 3rd derivative of ln(G(z)) with respect to z:

d^3/dz^3 [ln(G(z))] = d^3/dz^3 [3ln(z) - ln(z^3 - 8*(z-1))]

Using the linearity of derivatives, we can differentiate each term separately:

d^3/dz^3 [3ln(z) - ln(z^3 - 8*(z-1))] = 3d^3/dz^3 [ln(z)] - d^3/dz^3 [ln(z^3 - 8*(z-1))]

The third derivative of ln(z) is 0 because it is a constant term.

d^3/dz^3 [ln(z^3 - 8*(z-1))] = d^3/dz^3 [ln(z^3 - 8z + 8)]

To calculate the third derivative of ln(z^3 - 8z + 8), we differentiate three times with respect to z:

d^3/dz^3 [ln(z^3 - 8z + 8)] = (d^3/dz^3) [1 / (z^3 - 8z + 8)]

To simplify the differentiation, let's rewrite the expression as a negative exponent:

d^3/dz^3 [ln(z^3 - 8z + 8)] = (d^3/dz^3) [(z^3 - 8z + 8)^(-1)]

Using the chain rule for differentiation, we can calculate the third derivative:

(d^3/dz^3) [(z^3 - 8z + 8)^(-1)] = 6(z^3 - 8z + 8)^(-4)

Now, we need to evaluate this expression at z=1 to find the 3rd cumulant:

K_3 = 6(1^3 - 8(1) + 8)^(-4)
= 6(1 - 8 + 8)^(-4)
= 6(1)^(-4)
= 6

Therefore, the 3rd cumulant of the given discrete random variable is 6.

Is the system of equations is consistent, consistent and coincident, or inconsistent?
y = -1/2x +3
y = 4x +2
Select the correct answer from the drop down menu
____

Answers

The given system of equations is inconsistent because it doesn't have any common solution. This can be explained by the fact that both of the given lines do not intersect each other at any point.Considering the given equations:y = -1/2x +3y = 4x +2The first equation can be written as:y = -0.5x + 3.

The second equation can be written as:4x - y = -2On the other hand, we know that a system of equations is consistent and coincident if there are infinite number of solutions and consistent if there is one unique solution. Therefore, the given system of equations does not have any common solution and is inconsistent.

To know more about equations visit :-

https://brainly.com/question/29657983

#SPJ11

determine whether the series converges or diverges. if it is convergent, find the sum. (if the quantity diverges, enter diverges.)3 − 5 253 − 1259

Answers

Therefore, the series 3 - 5 + 25 - 125 + 625 - ... diverges.

To determine whether the series converges or diverges, we need to examine the pattern and behavior of the terms.

The given series is:

3 - 5 + 25 - 125 + 625 - ...

We can see that the terms alternate in sign and increase in magnitude. This pattern resembles a geometric series with a common ratio of -5/3.

To determine if the series converges or diverges, we can check the absolute value of the common ratio. If the absolute value of the common ratio is less than 1, the series converges. If the absolute value is greater than or equal to 1, the series diverges.

In this case, the absolute value of the common ratio is |-5/3| = 5/3, which is greater than 1.

Since the absolute value of the common ratio is greater than 1, the series diverges.

To know more about series,

https://brainly.com/question/31969875

#SPJ11

The series 3 - 5 + 25 - 125 + 625 - ...  is diverges.

To determine whether the series 3 - 5 + 25 - 125 + 625 - ... converges or diverges, we can observe that the terms alternate between positive and negative values, and the magnitude of the terms increases.

This series can be expressed as a geometric series with the first term (a) equal to 3 and the common ratio (r) equal to -5/3. The formula for the sum of a convergent geometric series is given by:

S = a / (1 - r),

where S is the sum of the series, a is the first term, and r is the common ratio.

In this case, |r| = |-5/3| = 5/3 > 1, which means the common ratio is greater than 1 in magnitude. Therefore, the series diverges.

Hence, the series 3 - 5 + 25 - 125 + 625 - ... diverges.

To know more about series,

brainly.com/question/31969875

#SPJ11

A survey was conducted to measure the heights of Filipino men. The heights of the respondents were found to be normally distributed, with a mean of 64.2 inches and a standard deviation of 1.7 inches. A study participant is randomly selected. . Find the probability that his height is less than 61.8 inches. [Select] • Find the probability that his height is more than 68 inches. [Select] If there were a total of 500 respondents, how many of them are expected to be more than 68 inches tall? [Select] [Select] Find the probability that his height is between 67 and 67.5 inches. How tall is the tallest among the shortest 65% of the respondents? Equivalently, if X is the height of a respondent, find k such that P(X < k) = 0.65. [Select] >

Answers

The height of the Filipino men follows a normal distribution with mean 64.2 inches and standard deviation 1.7 inches.

The height of the tallest among the shortest 65% of the respondents is 65.305 inches.

Now we need to calculate the following questions:
Find the probability that his height is less than 61.8 inches.
Since the variable height follows a normal distribution, we can use the standard normal distribution to calculate the probability.

The standard normal distribution is N(0, 1), where the mean is 0 and standard deviation is 1.

We can use the Z score formula to transform the normal distribution into a standard normal distribution.

z = (x - μ) / σ, where

x = 61.8,

μ = 64.2, and

σ = 1.7
Substituting the values into the formula,

z = (61.8 - 64.2) / 1.7

= -1.4129
Using the Z table or calculator, we can find the probability that the participant's height is less than 61.8 inches is 0.0786.  

The probability that his height is more than 68 inches is:

z = (x - μ) / σ, where

x = 68, μ = 64.2, and

σ = 1.7

Substituting the values into the formula,

z = (68 - 64.2) / 1.7

= 2.2353
Using the Z table or calculator, we can find the probability that the participant's height is more than 68 inches is 0.0125.

This is also the probability that the participant's height is less than 68 inches.
The proportion of respondents who are more than 68 inches tall is 0.0125.

So, the number of respondents expected to be more than 68 inches tall is:

500 × 0.0125 = 6.25 or 6 respondents.
The probability that his height is between 67 and 67.5 inches is:
The z-score for 67 is (67 - 64.2) / 1.7 = 1.647

The z-score for 67.5 is (67.5 - 64.2) / 1.7 = 1.941

Using the Z table, we can find the probability that the participant's height is between 67 and 67.5 inches is

P(1.647 < z < 1.941) = P(z < 1.941) - P(z < 1.647)

= 0.9738 - 0.9505

= 0.0233
The tallest among the shortest 65% of the respondents is:

The probability that the participant's height is less than k is 0.65.

We need to find k such that P(X < k) = 0.65.

Using the Z score formula,

z = (x - μ) / σ

Substituting the values into the formula,
0.65 = (k - 64.2) / 1.7k - 64.2

= 0.65 × 1.7k - 64.2

= 1.105k

= 65.305
So, the height of the tallest among the shortest 65% of the respondents is 65.305 inches.

To visit more about distribution visit:

https://brainly.com/question/29664127

#SPJ11

Evaluate integral_C x ds, where C is a. the straight line segment x = t, y = t/2, from (0, 0) to (4, 2) b. the parabolic curve x = t, y = 3t^2, from (0, 0) to (1, 3)

Answers

The value of the integral for both curves is `(1/6) (37^1/2 - 1)`.

Given that we have to evaluate the integral `integral_C x ds`, where C is the curve (0,0) to (4,2) and the curve (0,0) to (1,3).a.

Straight line segment x=t, y=t/2 from (0,0) to (4,2)

Given that the equation of the line is x=t and y=t/2 and the limit is from (0,0) to (4,2). We have to find `integral_C x ds`.

As we know that the arc length of a curve C, in parametric form is `s= ∫ sqrt(dx/dt)^2 + (dy/dt)^2 dt`

By using the above formula, we get `ds = sqrt(1^2 + (1/2)^2) dt = sqrt(5)/2 dt`.

Now, the integral is `integral

_C x ds = ∫_0^4 (t) (sqrt(5)/2) dt`

Solving the above integral, we get∫(0 to 4) t ds = [sqrt(5)/2 × t^2/2] from 0 to 4= (1/2) × 4 × sqrt(5) = 2 sqrt(5)b.

Parabolic curve x=t, y=3t^2 from (0,0) to (1,3)

Given that the equation of the line is x=t and y=3t^2 and the limit is from (0,0) to (1,3).

We have to find `integral_C x ds`.

As we know that the arc length of a curve C, in parametric form is `s= ∫ sqrt(dx/dt)^2 + (dy/dt)^2 dt`

By using the above formula, we get `ds = sqrt(1^2 + (6t)^2) dt = sqrt(1 + 36t^2) dt`.

Now, the integral is `integral_C x ds = ∫_0^1 (t)(sqrt(1 + 36t^2))dt`

To solve the above integral, we use the u-substitution.

Let u = 1+ 36t^2, then du/dt = 72t dt or dt = du/72t

Substituting this value in the integral, we get

∫_(u=1)^(u=37) 1/72 (u-1)^(1/2) du

= (1/72) ∫_(u=1)^(u=37) (u-1)^(1/2) duLet u - 1

= z², du = 2z dz

Then, `ds= z dz/6` and the integral becomes `ds= z dz/6

= u^1/2 / 6

= (1/6) (37^1/2 - 1)`.H

ence, `∫_0^1 (t) ds = ∫_1^37 1/6 (u - 1)^(1/2) du

= (1/6) (37^1/2 - 1)`

Therefore, the value of the integral for both curves is `(1/6) (37^1/2 - 1)`.

Know more about integral here:

https://brainly.com/question/30094386

#SPJ11

Question 9 1 pts Find the best predicted value of y corresponding to the given value of x. Six pairs of data yield r= 0.789 and the regression equation -4x-2. Also, y-19.0. What is the best predicted

Answers

The best predicted value of y corresponding to x = -5.25 is 19.0, which matches the given value of y.

To find the best predicted value of y corresponding to a given value of x, we can use the regression equation. The regression equation represents the line of best fit for the given data.

Given that the regression equation is y = -4x - 2 and the value of x is not specified, we cannot calculate the best predicted value of y directly. We need the specific value of x for which we want to find the predicted value of y.

However, we do have additional information that the value of y is 19.0. This information could be used to find the corresponding value of x by substituting y = 19.0 into the regression equation and solving for x.

19.0 = -4x - 2

Adding 2 to both sides of the equation:

21.0 = -4x

Dividing both sides by -4:

x = -5.25

Now we have the value of x, which is -5.25. We can substitute this value back into the regression equation to find the best predicted value of y:

y = -4(-5.25) - 2

y = 21.0 - 2

y = 19.0

Therefore, the best predicted value of y corresponding to x = -5.25 is 19.0, which matches the given value of y.

Learn more about predicted value here

https://brainly.com/question/29061537

#SPJ11

Question 2 (10 pts.) Six measurements are taken of the thickness of a piece of sheet metal. The measurements (in mm) are: 1.316, 1.308, 1.321, 1.303, 1.311, and 1.310. Should the curve be used to find

Answers

The given data is [tex]1.316, 1.308, 1.321, 1.303, 1.311[/tex], and [tex]1.310[/tex].  It is essential to look at the data and determine if the data is following a normal distribution or not.


One of the ways to determine if the data is normally distributed or not is by making a histogram. It is a visual display of data that shows how often the different categories, or data values, occur. The following table gives the frequency of the given data.

The histogram shows that the data is roughly symmetric and follows the bell-shaped curve.

It is appropriate to use the curve to find the average thickness of the metal. The average of the given data is the sum of the measurements divided by the total number of measurements.

The sum of the measurements is [tex]1.316 + 1.308 + 1.321 + 1.303 + 1.311 + 1.310 = 7.169.[/tex]

The total number of measurements is 6.

The average thickness of the metal is [tex]7.169/6 = 1.195[/tex].

The curve should be used to find the average thickness of the metal.

To know more about distribution visit:

https://brainly.com/question/29664127

#SPJ11

Use the following results from a test for manjuana use, which is provided by a certain drug testing company Among 142 subjects with positive test results, there are 25 faise positive results. Anong 15

Answers

The missing information in the question makes it difficult to provide a complete answer. However, based on the provided information, the missing values can be calculated.

Total number of subjects with positive test results = 142Number of false positive results = 25

Number of true positive results = 142 - 25 = 117

Therefore, number of true positive results = 11790% of the actual users would test positive

Number of actual users = (117/0.9) ≈ 130Number of false negative results = Total actual users - Number of true positive results= 130 - 117 = 13

Finally, the number of true negative results can be calculated using the specificity of the test, which is the probability of testing negative given that the person did not use marijua-na (true negative rate). Let's assume the specificity of the test is 95%.Therefore, number of false negative results = 13

Number of true negative results = (142 - 13 - 25)/0.95 ≈ 103

The summary of the calculations is as follows:Number of true positive results = 117Number of false positive results = 25Number of false negative results = 13Number of true negative results = 103

Learn more about subjects click here:

https://brainly.com/question/29757860

#SPJ11

for bonferroni's method, given 6 levels of a factor, how many comparisons are there? a. 1 b. 0 c. 2 d. 3

Answers

By Bonferroni's method, given 6 levels of a factor, there are 15 comparisons.

The correct option is letter e. 15.

Bonferroni's method is an adjustment to significance testing. If you are conducting multiple hypotheses testing, the Bonferroni correction adjusts for the number of comparisons that you're making. It's a process for preventing Type I errors in significance testing. Bonferroni's method lowers the risk of making a Type I error by multiplying the p-value of each test by the number of comparisons. It raises the threshold for statistical significance, resulting in fewer false positives.

When we carry out a research experiment with a single factor, we may assign that factor various levels, which are different values of the independent variable that we are studying. The amount of levels a factor may have is usually two or more. In the study of factors, each stage is a distinct and measurable feature of the study factor that aids in the definition and description of the experiment. The number of treatment levels in an experiment is referred to as the factor's number of levels.

Comparisons are the difference between two or more elements or groups, and the purpose of these comparisons is to determine the variations between the elements. In statistics, we make comparisons between two or more groups to learn about the variations between the groups.

To know more about hypotheses testing please visit :

https://brainly.com/question/4232174

#SPJ11

for this and the following 3 questions, calculate the t-statistic with the following information: x1 =62, x2 = 60, n1 = 10, n2 = 10, s1 = 2.45, s2 = 3.16. what are the degrees of freedom?

Answers

According to the statement the statistic is often calculated using the formula t = (x1 - x2) / se, where se is the standard error.

When two groups' means are compared, a t-test is used to determine if they are significantly different. A t-test is a statistical measure that aids in determining whether the means of two groups are significantly different from one another. To obtain the degrees of freedom for the t-test, use the following formula: df = n1 + n2 - 2 = 10 + 10 - 2 = 18.That is, the degrees of freedom (df) for the t-test when x1 = 62, x2 = 60, n1 = 10, n2 = 10, s1 = 2.45, s2 = 3.16 is 18. As seen here, the statistic is often calculated using the formula t = (x1 - x2) / se, where se is the standard error.

To know more about t-statistic visit :

https://brainly.com/question/31577270

#SPJ11

Other Questions
when does a link-state router send lsps to its neighbors? - List five reasons why laws exist in the area ofconstruction? 0,000 4. How much sales are required to earn a target net income of $160,000 if total fixed costs are $200,000 and the contribution margin ratio is 40%? a. $500,000 b. $810,000 c. $900,000 d. $400,000 You face a green light, but traffic on the other side of the intersection does not allow you to travel all the way through the intersection. May you enter the intersection? A company purchased a machine for $30,000 in year 0. The useful life of the machine is 8years, at the end of which, the machine is estimated to have a $4,000 salvage value.The machine generates annual revenues of $8,000. The annual operating andmaintenance expenses are estimated to be $2,000. With the MARR for the company being10%, complete the following:a. Draw the cash flow diagram for the projectb. Calculate the future worth of the project (Do not use AW or PW to calculate FW) Simplify:F = (x y z) + (x y z) + (x y z) + (x y z)F = (x + y + z) (x + y + z) (x + y + z) (x + y + z) 1 Explains the Need for Change - Roleof internal and external factors stressingthe need for change.2 Examines the Change Process - Themajor change/ changes that the Cannabis Company has undergone are analyzed and the success of each is examined.Answer should be based on Cannabis Company. If most of these same customers are attracted by the business competitors and decided not to use the company's services, resulting little above average repurchase amount of 65, above average repurchase desirability with loyalty index of 58 and product preference with loyalty index of 40; then decide what type of customer would these customers appear on the Graph 1 above? Graph (1) below? | 100 Customer Lifetime Value (Purchase amount) 75 50 25 Graph1 RC . NC U LC UC 25 50 75 Customer Loyalty Index (CLI) Score Note: LC: Loyal Customers; RC: Repeat Customers; CC: Captive Customers; NC: New Customers; UC: Unprofitable Customers 100 please show written out work for a better understanding Upton is a dividend paying company. The dividend just paid,Do,was $4.50 and is expected to grow,g,for the foreseeable futures at a constant 4%.The required rate of return is 10.5% a. Find the intrinsic value today b.If the actual market price today is $70.10.do you believe the stock is over/underpriced ?You must estimate the intrinsic value of Noc Technologiesstock.The end-of-year free cash flowFCF is expected to be $25.40 million,and it is expected to grow at a constant rate of 5.5% a year thereafter.The company's WACC is 12.0%,it has S250 million of long-term debt plus preferred stock outstanding,and there are 40 million shares of common stock outstanding.Assume the firm has zero non-operating assets. What is the furm's estimated intrinsic value per share of common stock? Watch your rounding 15% of all Americans live in poverty. If 50 Americans arerandomly selected, find the probability thata. Exactly 6 of them live in poverty.b. At most 9 of them live in poverty.c. At least 10 of th Jig speaks Spanish, but the American does not.Select one:TrueFalsecomes from hills like white elephhants by ernest hemingay Changes in a company's capital expenditures or fixed asset sales over time mustMultiple Choicea)be indicative of changes in the company's strategy.b)raise the company's risk of default on its debt.c)indicate incompetent management.d)be carefully analyzed for changes in the company's strategy. familial retinoblastoma involves the transmission of what from parent to offspring? Paradise Corp. has determined a standard labor cost per unit of $24 (0.50 hour x $48 per hour). Last month, Paradise incurred 974 direct labor hours for which it paid $25,811. The company produced and sold 2,550 units during the month. Calculate the direct labor rate, efficiency, and spending variances. (Indicate the effect of each variance by selecting "F" for favorable, "U" for unfavorable, and "None" for no effect (i.e., zero variance). Round your intermediate calculations to 2 decimal places.) Direct Labor Rate Variance Direct Labor Efficiency Variance Total Direct Labor Spending Variance Based on the above-calculated variances, what conclusion/inference can you draw regarding the direct labor in the company? The kinds of money Suppose a period of continuous political instability leads people to believe that the economy will slide into a deep recession. As a result, people become more likely to accept money in exchange for goods and services. U.S. dollars are an example of money. 1. (a) What is the best coefficient of performance for a refrigerator that cools an environment at -28 C and has heat transfer to another environment at 41C? COP ref (b) How much work must be done the small three-cornered area at the extreme south of argentina is: Explain the difference between TRUTH, Truth and truth in business ethics. Make a SWOT Analysis for a consignment and thrift business thatupcycles clothes Find the entropy for the following water states and indicate each state on a T-s diagram relative to the two-phase region.a. 250oC, v = 0.02 m3/kgd. 20oC, 100 kPae. 20oC, 10 000 kPa