The wavelengths of the constituent travelling waves CANNOT be 400 cm.
The given parameters:
Length of the string, L = 100 cmThe wavelengths of the constituent travelling waves is calculated as follows;
[tex]L = \frac{n \lambda}{2} \\\\n\lambda = 2L\\\\\lambda = \frac{2L}{n}[/tex]
for first mode: n = 1
[tex]\lambda = \frac{2\times 100 \ cm}{1} \\\\\lambda = 200 \ cm[/tex]
for second mode: n = 2
[tex]\lambda = \frac{2L}{2} = L = 100 \ cm[/tex]
For the third mode: n = 3
[tex]\lambda = \frac{2L}{3} \\\\\lambda = \frac{2 \times 100}{3} = 67 \ cm[/tex]
For fourth mode: n = 4
[tex]\lambda = \frac{2L}{4} \\\\\lambda = \frac{2 \times 100}{4} = 50 \ cm[/tex]
Thus, we can conclude that, the wavelengths of the constituent travelling waves CANNOT be 400 cm.
The complete question is below:
A string of length 100 cm is held fixed at both ends and vibrates in a standing wave pattern. The wavelengths of the constituent travelling waves CANNOT be:
A. 400 cm
B. 200 cm
C. 100 cm
D. 67 cm
E. 50 cm
Learn more about wavelengths of travelling waves here: https://brainly.com/question/19249186
Chronic diseases are also know as
Answer:
Chronic Condition or Long-term Illness
Explanation:
They can also be known as Chronic Conditions or Long-Term Illnesses, hope this helps.
Answer:
Chronic condition, also called long-term condition.
Explanation:
Marks: 1
What is the power of a light that uses 300 joules of energy in 60
seconds?
18,000 W
50 W
5 W
0.2 W
Answer:
W = 5W
Explanation:
1W = 1J/s
W = Watts
J = Joules
s = seconds
W = J/s
W = 300J/60s
W = 5W
The surface temperature of our sun is about 5800 K, and the peak of its intensity curve is in the middle of the visible spectrum. Mammals have a body temperature of about 310 K. A star that appears reddish could have a surface temperature of:
Explanation:
i expected to use Stefan's law of heat exchange but the value you gave aren't conclusive.
I should say that the temperature of the star should be close to that of the sun because of the similarity in the intensity curves
An object following a straight-line path at constant speed
A.) has no forces acting on it.
B.) has a net force acting on it in the direction of motion.
C.) has zero acceleration.
D.) must be moving in a vacuum.
E.) none of the above
An object following a straight-line path at constant speed is option C.) has zero acceleration.
Are there any forces acting on a moving item traveling in a straight line at a constant speed?There are no forces operating on a body if it is travelling straight ahead at a steady speed. There are no forces operating on a body if it is travelling straight ahead at a steady speed.
Note that the physics concept of acceleration measures how quickly an object's motion is changing. An object's speed or velocity is what largely defines its motion.
Therefore, An object is considered to be accelerating when its velocity changes over time and as such since acceleration of the object is said to be zero, one can say that the net force acting on it is also zero.
Learn more about straight-line path from
https://brainly.com/question/23271529
#SPJ1
As the amount of charge on either of two charged objects increases, the electric force between the objects decreases.
O True O False
Answer:
False.
Explanation:
provided the distance between the forces remains the same, the force will increase with increased charge, whether attractive or repulsive.
Answer This!!!!!!
I'll give brainliest to whoever gets it right.
Answer:
Explanation:
Gamma can occur at any step in the decay as the remaining protons and neutrons rearrange themselves into their new identity.
You will create your own circuit , discuss how electricity flows and describe how circuits are made in
Answer:
An electric current flows in a loop,powering bulbs or other electric COMPONENTS. The loop is an electric circuit. A circuit is made up of various components linked together by wires. The current is driven around the circuit by a power source, such as a BATTERY.
Voltage: is the energy given to each unit of charge that flows in a circuit
Current: is the amount of electric charge flowing past a point in a circuit each second
Wattage: is the amount of electrical energy a circuit uses each second
Colloid - well ______ together but not ______________
Answer:Colloid - well compacted together but not one
a plane crashes with a deceleration of 185 m/s. How many g’s is this?
Answer:
26 g's
Explanation:
Hope this helps~
Have a great day
Zero
When a baseball curves to the right (a curveball) , air is flowing faster over the right side than over the left side. at the same speed all around the baseball, but the ball curves as a result of the way the wind is blowing on the field. faster over the left side than over the right side. faster over the top than underneath.
Answer:
faster over the left side than over the right side.
Explanation:
due to ball rotation, the right side is more closely matched to the speed of the air passing by as the ball progresses. This causes the air to stick more closely to the right side of the ball and that air stays with the ball surface as the spin moves it to the back of the ball and therefore leftward. As every action has an equal and opposite reaction the leftward force moving air causes the ball to experience an equal rightward force.
When the baseball curves to the right (a curveball), then the ball moves faster over the left side than over the right side.
What direction does a curveball move?The ball, which is thrown with a spin, is curve in the direction in which the front of the ball turns.
When a baseball curves to the right (a curveball),
For this condition, the pressure of air should be high on the left side than the pressure on right side.Molecules of the air on right side pushed backward by this spinning ball.The left side with high pressure push the ball towards right side where the pressure is low.Due to higher pressure, the ball move faster on the left side than the right side.Hence, when the baseball curves to the right (a curveball), then the ball moves faster over the left side than over the right side.
Learn more about the curveball movement here;
https://brainly.com/question/1052138
A 2.55 kg piece of lead at 40 degree Celsius is placed in a very large quantity of water at 10 degree Celsius and thermal equilibrium is eventually reached. Calculate the entropy change of the lead that occurs during this process. The specific heat of lead is 130 J/(kg K).
6.6 J/K
1.4 J/K
190 J/K
100 J/K
6.2 J/k
i think this is a answer
The part of the circuit that converts electrical energy into other forms
Answer:
Load
Explanation:
The load in an electric circuit is any device that converts electrical energy into another form of energy.
Imagine that there is a small rocky body caught by Earth’s gravity. Draw a comic-strip cartoon
to illustrate its journey as it travels through space toward Earth, enters Earth’s atmosphere, and
lands on Earth. Describe your illustration with narration or speech/thought bubbles. Include the
use of these key terms: atmosphere, meteor, meteoroid, meteorite.
To create this comic strip you can use a narration describing each step and illustrate each one with one image or drawing.
Creating a comic strip involves using images and short texts to explain a specific idea or phenomenon. In the case of the process for a meteor to enter Earth you can use the following ideas.
A meteoroid approaches the Earth at high speed and draw a meteor traveling near to different planets and approaching Earth.What is that? and draw the Earth wondering who or what is approaching.The meteoroid enters the atmosphere of the Earth and becomes a meteor and draw the rocky body burningThe rocky body crashes with the surface becoming a meteorite and draw the zone where the meteorite crashed.Learn more about comic in: https://brainly.com/question/1418309
Best way to demonstrate that waves transfer energy
Answer:
Waves can transfer energy over distance without moving matter the entire distance. For example, an ocean wave can travel many kilometers without the water itself moving many kilometers. The water moves up and down—a motion known as a disturbance. It is the disturbance that travels in a wave, transferring energy.
Explanation:
Use the circuit diagram to decide if the lightbulb will
light. Justify your answer.
Answer:
The light bulb will NOT light because the lower switch being closed makes a short circuit. The light will have a high resistance and the electricity will choose to flow the easiest way possible through the low resistance wires.
Explanation:
Car 1 of mass m1 is waiting at a traffic light.
Car 1 is struck from behind by Car 2 of mass m2.
The two cars stick together after the collision.
Car 2 was traveling at v2i = 30.0 m/s before the collision.
What is the kinetic, in [J], of the system after the collision if m1 = 2500 kg and m2 = 1000 kg?
Answer:
Explanation:
Conservation of momentum
2500(0) + 1000(30) = (2500 + 1000)v
v = 8.57 m/s
KE = ½(2500 + 1000)8.57² = 128,571.428... = 128 KJ
The kinetic energy of the system after the collision would be 128.5 KJ.
What is momentum?It can be defined as the product of the mass and the speed of the particle, it represents the combined effect of mass and the speed of any particle, and the momentum of any particle is expressed in Kg m/s unit.
As given in the problem Car 1 of mass m1 is waiting at a traffic light.
Car 1 is struck from behind by Car 2 of mass m2. The two cars stick together after the collision. Car 2 was traveling at v2i = 30.0 m/s before the collision.
By using the conservation of the momentum,
2500(0) + 1000(30) = (2500 + 1000)v
v = 8.57 m/s
The final velocity of the system comes out to be 8.57 m/s.
The kinetic energy of the system after the collision,
KE =1/2×(2500 + 1000)×8.57² = 128,571.4
= 128.5 KJ
Thus, the kinetic energy of the system after the collision would be 128.5 KJ.
To learn more about momentum from here, refer to the link;
brainly.com/question/17662202
#SPJ2
Important parts of stydi g physics
Answer:
put your question in proper way' i hope you understand.
Explanation:
Word Bank:
Electrical
Mechanical
Chemical
Light
Thermal
Sound
Answer:
Light to
Electrical to
mechanical and sound
Three particles are placed in the xy plane. A 30-g particle is located at (3, 4) m, and a 40-g particle is located at (-2, -2) m. Where must a 20-g particle be placed so that the center of mass of the three-particle system is at the origin?
Answer:
Explanation:
30(3) + 40(-2) + 20(x) = 0(20 + 30 + 40)
x = -0.5
30(4) + 40(-2) + 20(y) = 0(20 + 30 + 40)
y = -2
(-0.5, -2)
Two a.c V1=100sin(wt) and V2 = 150cos(wt) are fed into one circuit, determine the combined output of the two as a single a.c
Answer:
Explanation:
V = 100sin(ωt) + 150cos(ωt)
let x = ωt
V = 100sin(x) + 150cos(x)
a maximum or minimum will occur when the derivative is zero
V' = 100cos(x) - 150sin(x)
0 = 100cos(x) - 150sin(x)
100cos(x) = 150sin(x)
100/150 = sin(x)/cos(x)
0.6667 = tan(x)
x = 0.588 rad
V = 100sin(0.588) + 150cos(0.588)
V = 180.27756
as the maximum will not occur until ωt = 0.588 radians, for a cosine function we subtract that amount as a phase angle φ
V = 180.3 cos(ωt - 0.588)
or as a sine function, the phase angle lags the cosine by a difference of π/2
V = 180.3sin(ωt - (0.588 - π/2)
V = 180.3sin(ωt + 0.983)
What is the object' velocity between O s and 2 s?
Answer:
Explanation:
Acceleration b/c 0m/s/2s =0m/s²
Kyle, a 23-year-old-male, feels as if he is always on the “edge of his seat,” as if something is going to happen. He also has problems sleeping. Kyle feels nervous continuously and cannot seem to relax. When asked if he is nervous about something in particular, he can’t pinpoint the source of his anxiety.
Based on the information given, it can be posited that Kyle has a general anxiety disorder.
Generalized Anxiety Disorder is a disorder that is characterized by persistent and excessive worry about different things. People with the disorder may anticipate disaster and are concerned about money, health, family, or other issues.
Some of the effective ways of treatment are spending more time with family and friends, doing regular exercises , enough sleeping, etc.
Learn more about disorder on:
https://brainly.com/question/25771019
(a / xy=2x+a)does anyone can solve this??
Answer:??
Answer:
Explanation:
a / xy = 2x + a
a = 2x²y + axy
a(1 - xy) = 2x²y
a = 2x²y / (1 - xy)
a / xy = 2x + a
a = 2x²y + axy
a = y(2x² + ax)
y = a / (2x² + ax)
a / xy = 2x + a
a = 2x²y + axy
a / xy = 2x + a
0 = 2yx² + ayx - a
x = (-ay ±√((ay)² - 4(2y)(-a))) / (2(2y))
x = (-ay ±√(a²y² + 8ay)) / 4y
A 2 kg object being pulled across the floor with a speed of 10 m/sec is suddenly
released and slides to rest in 5 sec. What is the magnitude of the frictional force
producing this deceleration?
Answer:
The frictional force producing this deceleration would have a magnitude of [tex]4\; \rm N[/tex].
Explanation:
The velocity of this object changed by [tex]\Delta v = (-10\; \rm m\cdot s^{-1})[/tex] in [tex]\Delta t = 5\; \rm s[/tex]. The acceleration of this object would be:
[tex]\begin{aligned}a &= \frac{\Delta v}{\Delta t} \\ &= \frac{-10\; \rm m\cdot s^{-1}}{5\; \rm s} = -2\; \rm m\cdot s^{-2}\end{aligned}[/tex].
Let [tex]m[/tex] denote the mass of this object. By Newton's Second Law of Motion, the net force on this object would be:
[tex]\begin{aligned}F &= m \, a \\ &= 2\; \rm kg \times (-2\; \rm m\cdot s^{-2}) \\ &= -4\; \rm N\end{aligned}[/tex].
([tex]1\; {\rm kg \cdot m \cdot s^{-2} = 1\; {\rm N}[/tex].)
If the floor is level, friction would be the only unbalanced force on this object. Thus, the magnitude of the frictional force on this object would also be [tex]4\; {\rm N}[/tex], same as the magnitude of the net force on this object.
When a hot metal cylinder is dropped into a sample of water, the water molecules
Answer:
I believe the answer is speed up.
Explanation:
this is because when water heats up the molecules move father apart from each other they speed up, eventually causing the water to boll
HELPPP!! Thanks!
If you only wanted to increase the particle motion of a gas without increasing any of its other properties, which would the most correct situation?
a. Keep the gas at a constant pressure and keep the temperature constant, but increase the volume of the gas
b. Keep the gas in a fixed container at constant pressure and increase the temperature
c. Keep the gas in a fixed container at constant pressure and decrease the temperature
d. Keep the gas at a constant volume and keep the temperature constant, but decrease the pressure of the gas
Answer:c i think
Explanation: not sure
One potato plant makes 7.5
potatoes. There are 10.000
people on a ship and 3
potatoes per person. How
many potato plants are
needed per person.
If all conditions are ideal, you may harvest about five to 10 potatoes per plant for your gardening efforts. Yields are based on both the care your give your plants during the growing season and the variety of potatoes you choose to grow.
answer
7.5×10.000=75÷3=25
The fastest possible rate of rotation of a planet is that for which the gravitational force on material at the equator just barely provides the centripetal force needed for the rotation. Calculate the minimum rotation period assuming a density of 3.70 g/cm3.
Answer:
m ω^2 R = centripetal force
G M m / R^2 = gravitational force
ω^2 = G M / R^3 for the forces to be equal
d (density) = M / V = M / (4/3 R^3) = 3/4 M / R^3
or M / R^3 = 4 d / 3
Then
ω^2 = G 4 d / 3
d = 3.7 g/cm^2 = 3700 kg/m*3 converting
ω^2 = 6.67E-11 * 3700 * 4 / 3 = 32.9E-8
ω = 5.74E-4
P = 1 / f = 2 pi / ω = 6.28 / 5.74E-4 = 1.09E4 sec
10900 / 3600 = 3.04 hrs for the minimum rotation period
A child on ice skates is given a small push from behind by a parent. How are forces used to describe the resulting motion?(1 point)
Because of equal and opposite reactions, there will be a force opposing the push from the parent, and they will not move.
Because of equal and opposite reactions, there will be a force opposing the push from the parent, and they will not move.
There is an unbalanced force on the child, and the child’s motion will change direction or increase speed.
There is an unbalanced force on the child, and the child’s motion will change direction or increase speed.
There is a balanced force on the child, and the child’s motion will change direction or increase speed.
There is a balanced force on the child, and the child’s motion will change direction or increase speed.
Because of equal and opposite reactions, the child will move in the opposite direction to the force.
A child on ice skates is given a small push from behind by a parent. There is an unbalanced force on the child, and the child’s motion will change direction or increase speed.
A child on ice skates is given a small push from behind by a parent. How are forces used to describe the resulting motion?
Because of equal and opposite reactions, there will be a force opposing the push from the parent, and they will not move. FALSE. According to Newton's third law of motion, if the parent applies force on the child, there will be a reaction applied by the child on the parent. These forces are applied to different objects so they will not cancel and the child will move. There is an unbalanced force on the child, and the child’s motion will change direction or increase speed. TRUE. The child will have an acceleration as a consequence of the unbalanced force. The acceleration will be responsible for the change in the direction or speed of the child. There is a balanced force on the child, and the child’s motion will change direction or increase speed. FALSE. If the forces were balanced, that is, there was no net force, the movement of the child would not change, as stated by Newton's first law of motion. Because of equal and opposite reactions, the child will move in the opposite direction to the force. FALSE. The child will move in the direction of the net force.A child on ice skates is given a small push from behind by a parent. There is an unbalanced force on the child, and the child’s motion will change direction or increase speed.
Learn more about Newton's laws here: https://brainly.com/question/6839345
how long does it take to reach the moon?
Over the past few decades man has always embarked on different space exploration by traveling to the moon. A typical Journey to the moon from Earth will take about 3 days in recent times.
It takes about 3 days for a spacecraft to reach the Moon. During that time a spacecraft travels at least 240,000 miles In the year 1969 the first man (Neil Armstrong ) landed on the moon, the journey took him 8 days, 3 hours, 18 minutes, 35 seconds, on 16 July.Research on space exploration is still growing and expanding, with large amount of funding and support globally.
Learn more about Space and moon exploration:
https://brainly.com/question/3983943
