A survey of 25 randomly selected customers found the ages shown​(in years). The mean is 31.88 years and the standard deviation is 9.25years. ​

31 20 28 38 13
27 38 35 27 41
31 43 40 35 20
35 33 23 49 23
43 32 16 32 44
a) How many degrees of freedom does the​ t-statistic have?

​b) How many degrees of freedom would the​ t-statistic have if the sample size had been ​100?

a) The​ t-statistic has ___ degrees of freedom. ​(Simplify your​answer.)

A control chart is a statistical tool used to monitor the process and make decisions based on the process’s performance. A control chart consists of a central line that represents the process average and two control limits: the upper control limit (UCL) and the lower control limit (LCL). Any data point outside these limits indicates an out-of-control process.

As per the given problem statement, the required chart for each of the three suppliers is to be analyzed using a proper control chart.

Given data is:

Suppliers Data Dulce

25.63 0.16 100 0 4 25.48 25.43 25.56 25.65 25.69 25.57 25.65 25.58 25.67 25.60 25.52 25.66 25.46

The data are taken for three suppliers:

Dulce, Dolcezza, and Dulcella.

The data for Dulce is taken as an example, and the same process can be repeated for other suppliers as well.

To make the control chart, we will follow the below

Calculate the mean of the data set:

Mean = Σxi/n

Where xi is the data point, and n is the number of data points.

Mean = (25.63 + 0.16 + 100 + 0 + 4 + 25.48 + 25.43 + 25.56 + 25.65 + 25.69 + 25.57 + 25.65 + 25.58 + 25.67 + 25.60 + 25.52 + 25.66 + 25.46)/18

Mean = 26.30/18

Mean = 1.46 2.

Calculate the range:

Range = Maximum value - Minimum value

Range = 100 - 0

           = 100 3.

Calculate the mean of the range:

Mean of the range = ΣR/n

Where R is the range, and n is the number of ranges.

Mean of the range = (100)/6

                               = 16.67 4.

Calculate the upper control limit (UCL) and lower control limit (LCL):

UCL = Mean + A2 x (Mean of the range)

LCL = Mean - A2 x (Mean of the range)

Where A2 is a constant based on the sample size.

A2 can be determined from the A2 table that is attached at the end of this solution.

For n = 100, A2 = 1.88

Using the formula, we get,

UCL = 1.46 + (1.88 x 16.67)

UCL = 32.55

LCL = 1.46 - (1.88 x 16.67)

LCL = -29.64 5.

Plot the data on the control chart.

The below control chart can be drawn by using the above values for Dulce:

As we can see from the control chart above, all data points lie within the control limits.

Therefore, the process is in control.

The same process can be repeated for the other two suppliers, and the control chart can be drawn for each one of them.

For such more questions on control chart

https://brainly.com/question/26478724

#SPJ8

The probability that a randomly selected adult female's pulse rate is less than 83 beats per minute is approximately 0.7257.

To calculate the probability, we need to standardize the value using the z-score formula and then find the corresponding area under the standard normal distribution curve.

First, we calculate the z-score using the formula:

z = (x - μ) / σ

where x is the given value (83 beats per minute), μ is the mean (76.0 beats per minute), and σ is the standard deviation (12.5 beats per minute).

z = (83 - 76.0) / 12.5

z = 0.56

Next, we find the area to the left of the z-score using a standard normal distribution table or a calculator. The area represents the probability of a randomly selected adult female having a pulse rate less than 83 beats per minute.

Using the standard normal distribution table or a calculator, we find that the area to the left of the z-score 0.56 is approximately 0.7257.

The probability that a randomly selected adult female's pulse rate is less than 83 beats per minute is approximately 0.7257. This means that there is a 72.57% chance of selecting an adult female with a pulse rate lower than 83 beats per minute from the given normal distribution.

To know more about probability visit:

https://brainly.com/question/13604758

#SPJ11

The sample size increases, the standard error of the mean decreases.

Explanation:

Given that the average IQ of a sample of 1500 males is 90 with a standard deviation of 5.5 points.To find the standard error of the mean we use the following formula:SEM = (standard deviation) / √n

Where, SEM = standard error of the mean,

σ = standard deviation,

n = sample size

Given,

σ = 5.5,n = 1500

Now, we can calculate the standard error of the mean:

SEM = (standard deviation) / √n= 5.5 / √1500≈ 0.14

So, the standard error of the mean is 0.14.

In general, the standard error of the mean is inversely proportional to the square root of the sample size.

To know more about standard deviation :

https://brainly.com/question/29115611

#SPJ11

A 95% confidence level upper bound on the turnout is c) 0.487 (or 48.7%). Hence, option c) is the correct answer. Confidence interval (CI) formula is given by :`CI = X ± Z* (s/√n)

Given that the exit poll of 10,000 voters showed that 48.4% of voters voted for party A.

`Where, X = Sample Mean, Z = Z-Score S = Standard Deviation, n = Sample Size

We have X = 48.4%,

Z-score at 95% confidence level = 1.96 (from Z-table), and n = 10,000

Now, to find the Standard deviation,

we have: p = 0.484 (proportion of voters who voted for party A),

q = 1 - p

= 0.516

Standard deviation, `s = √(pq/n)

= √((0.484×0.516)/10,000)

= 0.0158`

Now, putting the values in the formula, we get :

CI = 0.484 ± 1.96 (0.0158/√10,000)CI

= 0.484 ± 0.003CI

= (0.487, 0.481)

Thus, a 95% confidence level upper bound on the turnout is 0.487 (or 48.7%). Hence, the correct option is (c) 0.487.

To know more about confidence interval, refer

https://brainly.com/question/20309162

#SPJ11

Consider the situation where there is absolutely no variability in Y. The following are the possible answers:

(a) The standard deviation of Y would be 0 because the standard deviation measures the variability or spread of the data. When there is no variability, the standard deviation is 0.

(b) The covariance between X and Y cannot be determined because covariance measures the relationship between two variables, and if there is no variability in one variable (Y in this case), there is no relationship to measure.

(c) The Pearson correlation coefficient between X and Y cannot be determined because the Pearson correlation coefficient measures the strength of the linear relationship between two variables, and if there is no variability in one variable (Y in this case), there is no linear relationship to measure.

The correlation coefficient can only range between -1 and 1, so when there is no variability, the coefficient cannot be computed.

To learn more about deviation, refer below:

https://brainly.com/question/31835352

#SPJ11

The correct answer is D. setne 23 47. Based on the provided information, I understand that you have a comparison function in C code and its corresponding assembly code. You are asked to fill in the blanks by selecting the appropriate instructions based on the given values of a and b and the status flags SF, OF, ZF, and CF. Let's go through the options:

A. setg 47 23: This option is incorrect because setg is used to set a byte to 1 if the Greater flag (ZF=0 and SF=OF) is set, but the given values of a and b are 47 and 23, respectively, so it does not satisfy the condition for setg to be set.

B. setl 23 47: This option is incorrect because setl is used to set a byte to 1 if the Less flag (SF≠OF) is set, but the given values of a and b are 23 and 47, respectively, so it does not satisfy the condition for setl to be set.

C. sete 23 23: This option is incorrect because sete is used to set a byte to 1 if the Zero flag (ZF=1) is set, but the given values of a and b are 23 and 23, respectively, so it does not satisfy the condition for sete to be set.

D. setne 23 47: This option is correct. setne is used to set a byte to 1 if the Zero flag (ZF=0) is not set, which means the values of a and b are not equal. In this case, the given values of a and b are 23 and 47, respectively, so they are not equal, and setne should be used.

Therefore, the correct answer is D. setne 23 47

To know more about byte visit-

brainly.com/question/32309440

#SPJ11

The test statistic is approximately -2.06 and the associated p-value ≈ 0.125.

To carry out the hypothesis test for the given data set, we can perform a t-test for the slope of the regression line.

The null hypothesis (H₀) states that the slope (B₁) is equal to 1, and the alternative hypothesis (H₁) states that the slope is not equal to 1.

The test statistic (t-statistic) can be calculated as follows:

t = (B₁ - hypothesized value) / (standard error of B₁)

In this case, the hypothesized value is 1. We can use the formula:

B₁ = Σ((x - xbar)(y - ybar)) / Σ((x - xbar)²)

First, calculate the sample means for x and y:

xbar = (−1 + 2 + 4 + 9 + 11) / 5 = 5

ybar = (1 + 1 + 6 + 7 + 8) / 5 = 4.6

Next, calculate the sums needed for the formula:

Σ((x - xbar)(y - ybar)) = (−1 − 5)(1 − 4.6) + (2 − 5)(1 − 4.6) + (4 − 5)(6 − 4.6) + (9 − 5)(7 − 4.6) + (11 − 5)(8 − 4.6) = −20.8

Σ((x - xbar)²) = (−1 − 5)² + (2 − 5)² + (4 − 5)² + (9 − 5)² + (11 − 5)² = 68

Now, calculate the slope:

B₁ = Σ((x - xbar)(y - ybar)) / Σ((x - xbar)²) = −20.8 / 68 ≈ −0.306

To calculate the standard error of B₁, we need to calculate the residual sum of squares (SSres) and the degrees of freedom (df):

SSres = Σ(y - ŷ)²

ŷ = B₀ + B₁x (estimated regression line)

Using the formulas for the estimated regression line:

B₀ = ybar - B₁xbar = 4.6 - (-0.306)(5) ≈ 6.53

Now, calculate ŷ for each data point and SSres:

ŷ₁ = 6.53 + (-0.306)(-1) ≈ 6.84

ŷ₂ = 6.53 + (-0.306)(2) ≈ 6.21

ŷ₃ = 6.53 + (-0.306)(4) ≈ 5.59

ŷ₄ = 6.53 + (-0.306)(9) ≈ 3.94

ŷ₅ = 6.53 + (-0.306)(11) ≈ 3.33

SSres = (1 - 6.84)² + (1 - 6.21)² + (6 - 5.59)² + (7 - 3.94)² + (8 - 3.33)² ≈ 72.41

df = n - 2 = 5 - 2 = 3

Next, calculate the standard error of B₁:

Standard Error of B₁ = √(SSres / Σ((x - xbar)²)) / √df = √(72.

41 / 68) / √3 ≈ 0.496

Finally, calculate the test statistic:

t = (B₁ - hypothesized value) / (standard error of B₁) = (-0.306 - 1) / 0.496 ≈ -2.06

To determine the p-value associated with the test statistic, we can consult the t-distribution table or use statistical software.

For a two-sided test with a t-distribution with 3 degrees of freedom, the p-value is approximately 0.125.

To know more about test statistic refer here:

https://brainly.com/question/31746962#

#SPJ11

The Volume of a cube with an edge length of 2.5 ft is 15.625 ft³.

To calculate the volume of a cube, we need to use the formula:

Volume = (Edge Length)^3

Given that the edge length of the cube is 2.5 ft, we can substitute this value into the formula:

Volume = (2.5 ft)^3

To simplify the calculation, we can multiply the edge length by itself twice:

Volume = 2.5 ft * 2.5 ft * 2.5 ft

Multiplying these values, we get:

Volume = 15.625 ft³

Therefore, the volume of the cube with an edge length of 2.5 ft is 15.625 ft³.

Understanding the concept of volume is important in various real-life applications. In the case of a cube, the volume represents the amount of space enclosed by the cube. It tells us how much three-dimensional space is occupied by the object.

The unit of measurement for volume is cubic units. In this case, the volume is measured in cubic feet (ft³) since the edge length of the cube was given in feet.

When calculating the volume of a cube, it's crucial to ensure that the units of measurement are consistent. In this case, the edge length and the volume are both measured in feet, so the final volume is expressed in cubic feet.

By knowing the volume of a cube, we can determine various characteristics related to the object. For example, if we know the density of the material, we can calculate the mass by multiplying the volume by the density. Additionally, understanding the volume is essential when comparing the capacities of different containers or determining the amount of space needed for storage.

In conclusion, the volume of a cube with an edge length of 2.5 ft is 15.625 ft³.

For more questions on Volume .

https://brainly.com/question/30610113

#SPJ8

The MPC for a country will likely be measured as less than 1.0. In economics, plotting data  the MPC refers to the marginal propensity to consume.

It's a metric used to assess the impact of a change in income on consumer spending.The MPC for a country is a measure of the fraction of each extra dollar earned that is spent on goods and services. The marginal propensity to consume is less than one. It means that for each extra dollar earned, the consumer would not spend the entire amount. This is because as a person's income rises, the percentage of it spent on basic needs decreases.

For instance, if a person's income rises from $50,000 to $55,000 per year, the individual may be able to meet their basic needs. This would imply that they may spend less of each additional dollar earned.The MPC is calculated as the change in consumption divided by the change in income. If, for example, income rises by $100 and consumption rises by $80, the MPC would be 0.8 (80/100). This suggests that the propensity to spend is less than one.

To know more about plotting data visit:

https://brainly.com/question/29096917

#SPJ11

To determine which points represent an approximate solution to the system of equations, we need to substitute the x and y values of each point into the equations and check if they satisfy both equations.

Let's evaluate each option:

1) (1.5, 1):

  Substituting x = 1.5 and y = 1 into the equations:

  For the first equation: y = 1/(1.5) - 3 = -1.33, which is not equal to 1.

  For the second equation: y = 3 - (1.5)^3 = -0.125, which is not equal to 1.

  Therefore, (1.5, 1) is not an approximate solution to the system of equations.

2) (1.5, -0.7):

  Substituting x = 1.5 and y = -0.7 into the equations:

  For the first equation: y = 1/(1.5) - 3 = -1.67, which is not equal to -0.7.

  For the second equation: y = 3 - (1.5)^3 = -0.125, which is not equal to -0.7.

  Therefore, (1.5, -0.7) is not an approximate solution to the system of equations.

3) (1.6, 1.6):

  Substituting x = 1.6 and y = 1.6 into the equations:

  For the first equation: y = 1/(1.6) - 3 = -1.35, which is not equal to 1.6.

  For the second equation: y = 3 - (1.6)^3 = -0.54, which is not equal to 1.6.

  Therefore, (1.6, 1.6) is not an approximate solution to the system of equations.

4) (2.9, -22.8):

  Substituting x = 2.9 and y = -22.8 into the equations:

  For the first equation: y = 1/(2.9) - 3 = -2.67, which is not equal to -22.8.

  For the second equation: y = 3 - (2.9)^3 = -17.929, which is not equal to -22.8.

  Therefore, (2.9, -22.8) is not an approximate solution to the system of equations.

None of the given points represent an approximate solution to the system of equations.

To know more about equations visit-

brainly.com/question/4355032

#SPJ11

The second derivative test states that if f’(x) = 0 and f’’(x) > 0 at x = c, then f has a local minimum at c. Likewise, if f’(x) = 0 and f’’(x) < 0 at x = c, then f has a local maximum at c.

In other words, if the second derivative is positive, it means that the function is concave up, so the function is having a minimum value at that point. Likewise, if the second derivative is negative, it means that the function is concave down, so the function is having a maximum value at that point.

Given f(x) = 2x³ 3x² - 36x 5Therefore, we will begin by finding the first and second derivative of f(x).f’(x) = 6x² + 6x - 36f’’(x) = 12x + 6We set the second derivative to zero.12x + 6 = 0x = -0.5We use the second derivative test, since the second derivative is positive at x = -0.5. This means that f has a local minimum at x = -0.5. Therefore, the value of f at the point of the local maximum is:f(-0.5) = 2(-0.5)³ + 3(-0.5)² - 36(-0.5) + 5= -6.5.

To know more about concave visit :

https://brainly.com/question/31396617

#SPJ11

The formula for the average height of the paraboloid over R is  1/8.

The formula for the average of a function f(x,y) over a rectangular region R with area A is as follows:

1/A ∫∫R f (x,y) dA

In this case, we want to find the average height of the paraboloid z = x^2y^2 over the square 0 ≤ x ≤ 1, 0 ≤ y ≤ 1. Therefore, we have:

A = ∫∫R dA = ∫0¹ ∫0¹ dx dy = 1

The formula for the average height of the paraboloid over R is:

1/A ∫∫R z dA = 1 ∫0¹ ∫0¹ x^2y^2dxdy

= 1/4 * [x^4y^2/2] from 0 to 1 and from 0 to 1

= 1/4 * [1(1/2) - 0(1/2)] * [1(1/2) - 0(1/2)]

= 1/8

To know more about function visit:

https://brainly.com/question/30721594

#SPJ11

To find the common difference of the sequence shown below, we need to use the formula that defines arithmetic sequences. Arithmetic Sequence An arithmetic sequence is a sequence of numbers where the difference between consecutive terms is constant.

The formula that defines arithmetic sequences is given by:an = a1 + (n - 1)dwhere:an: the nth term of the sequencea1: the first term of the sequenced: the common difference between consecutive termsn: the number of terms in the sequence.

We can see from the given points that the sequence is {5, 2, -1}. To find the common difference (d), we can use any two consecutive terms in the sequence. Subtracting 2 from 5 gives:d = 5 - 2 = 3So, the common difference for the sequence shown below is 3.

To know more about Arithmetic Sequence visit:

brainly.com/question/28882428

#SPJ11

Answer:

[tex]Cost \ total= \$ 1755[/tex]

Step-by-step explanation:

Find the total cost of a rectangular shaped carpet, given the carpets length,  width, and the cost of carpet per square foot. Using the formula for the area of a rectangle.

[tex]\boxed{\left\begin{array}{ccc}\text{\underline{Area of a Rectangle:}}\\\\A=l \times w\end{array}\right}[/tex]

Where...

Given:

[tex]l=15 \ ft\\w=9 \ ft\\ 1 \ ft^2= \$ 13[/tex]

Find:

[tex]Cost \ total = \ ?? \[/tex]

(1) - Calculating the total area of the carpet, which is a rectangle

[tex]A=l \times w\\\\\Longrightarrow A=15 \ ft \times 9 \ ft\\\\\therefore \boxed{A=135 \ ft^2}[/tex]

(2) Calculate the total cost of the carpet by multiplying the total area of the carpet by the cost of one square foot of carpet

[tex]Cost \ total=135 \ ft^2 \times \$ 13\\\\\therefore \boxed{\boxed{Cost \ total= \$ 1755}}[/tex]

Thus, the total cost of the carpet is found.

The equation of the line passing through the point (-2, 5) and perpendicular to the line 6x + 2y = 8 is [tex]y = \frac{1}{3}x + \frac{17}{3}[/tex].

The slope-intercept form is expressed as;

y = mx + b

Where m is slope and b is the y-intercept.

Given the equation of the original line:

6x + 2y = 8

Solve for y:

2y = -6x + 8

y = -3x + 4

From the equation above, we can see that the slope of the given line is -3.

The negative reciprocal of -3 is 1/3.

So, the slope of the line perpendicular to the given line is 1/3.

Plug the slope m = 1/3 and point (-2,5) into point-slope formula and simplify.

( y - y₁ ) = m( x - x₁ )

[tex]y - 5 = \frac{1}{3}( x + 2) \\\\y - 5 = \frac{1}{3}x + \frac{2}{3} \\\\y = \frac{1}{3}x + \frac{17}{3}[/tex]

Therefore, the equation of the line is [tex]y = \frac{1}{3}x + \frac{17}{3}[/tex].

The complete question is:

Find the equation of the line passing through the point (−2,5) that is perpendicular to the line 6x + 2y = 8.

Learn more about equation of line here: brainly.com/question/2564656

#SPJ4

If B + BB is normal random Variable. a a Then (a + b B₂ ~ N (0, belt-s) +(arby's) b Be (1) then the probability P(5B₂ - 3 < 1) is approximately 0.57142.

To calculate this probability, we first need to find the standard deviation (σ) of the random variable 5B₂ - 3.  B₂ is a standard normal random variable (mean = 0, variance = 1), the standard deviation of 5B₂ - 3 can be calculated as √((5²)(1) + (-3)²) = √(25 + 9) = √34 ≈ 5.83095.

Next, we convert the inequality 5B₂ - 3 < 1 into a standard normal distribution. Subtracting 3 from both sides gives us 5B₂ < 4, and dividing both sides by 5 yields B₂ < 4/5 = 0.8.

Now, we calculate the z-score for B₂ = 0.8 using the formula z = (x - μ) / σ, where x is the value (0.8), μ is the mean (0), and σ is the standard deviation (5.83095). Thus, z = (0.8 - 0) / 5.83095 ≈ 0.13723.

To find the probability, we look up the corresponding z-score in the standard normal distribution table. P(Z < 0.13723) is approximately 0.57142.

Therefore, the probability P(5B₂ - 3 < 1) is approximately 0.57142.

To know more about random refer here:

https://brainly.com/question/12970235#

#SPJ11

Complete Question:

B + BB is normal random Variable. a a Then (a + b B₂ ~ N (0, belt-s) +(arby's) b Be (1) P (5&₂ - 3 < 1) = ? +=3, 5= 2₁ 6=5, a=-; 1 S= Van (56-36 ) = 25 +2²= 29. P/5B₂-3B₂-0 P ( 38 - ³8 = 0 <1%) _ Mas X₂) = P(Z < 2 29 = P(Z <0.18) =0,57142.

The equation is x √(x² + y²) = 7y x + y²

This equation describes a limacon, which is a type of polar curve.

Find a Cartesian equation for the curve and identify it. r 7tan() sec() circle O line O limaçon parabola O ellipse

The equation of the given curve is a limacon. A Cartesian equation for the curve r = 7tan(θ) sec(θ) is given by the following steps: First, make use of the identity  sec²(θ) = tan²(θ) + 1, by multiplying both sides of the equation by sec(θ) on both sides of the equation. So, we have the following:

r = 7tan(θ) sec(θ)r sec(θ) = 7tan(θ) tan²(θ) + tan(θ)Then, replace tan(θ) with y/x and sec(θ) with r/x to get a Cartesian equation.

xr = 7y x + y²We can further simplify this equation by eliminating the variable r using the fact that r² = x² + y².

This results in the equation x √(x² + y²) = 7y x + y²

This equation describes a limacon, which is a type of polar curve.

To know more on equation visit

https://brainly.com/question/17145398

#SPJ11

The value of the line integral ∫CF.dr along the given curve C is approximately equal to 3.66.

Given below:F(x, y, z) = (y^2z + 2xz^2)i + 2xyzj + (xy^2 + 2x^2z)k,C: x = \sqrt{t}, y = t + 5, z = t^2, 0 ≤ t ≤ 1

The function f such that F = ∇f is given by;

f(x, y, z) =∫ (y^2z + 2xz^2) dx + xy^2 + 2x^2z dy + xyz^2 dz

Performing partial integration with respect to x, we have:

f(x, y, z) = ∫ (y^2z + 2xz^2) dx + xy^2 + 2x^2z dy + xyz^2 dz

= (xy^2 + 2x^2z) + g(y, z)

Again performing partial integration with respect to y, we have:f(x, y, z) = (xy^2 + 2x^2z) + g(y, z)= (xy^2 + 2x^2z) + ∫2xyz dy + h(z)= xy^2 + 2x^2z + xyz^2 + C, where C is the constant of integration

Now, the part (b) requires the evaluation of ∫CF.dr along the given curve C.Substituting the values of x, y and z in the given curve C, we get;

C: x = \sqrt{t}, y = t + 5, z = t^2, 0 ≤ t ≤ 1

The limits of integration for t are from 0 to 1, since 0 ≤ t ≤ 1.

The line integral F.dr can be expressed as;

∫CF.dr = ∫CF(x(t), y(t), z(t)).r'(t) dt

Substituting F(x, y, z) and r'(t) in the above expression, we get;

∫CF.dr = ∫CF(x(t), y(t), z(t)).r'(t) dt

= ∫_{0}^{1}(y^2z + 2xz^2)(1/2) + 2xyz(1) + (xy^2 + 2x^2z)(2t) dt

= ∫_{0}^{1}(t + 5)^2 t^2 + 2(t^2)(1) + t(t + 5)^2 + 2t^2 (t^2) dt

= ∫_{0}^{1}(t^5 + 14t^4 + 56t^3 + 72t^2 + 10t) dt

= 3.66 (approx)

Therefore, the value of the line integral ∫CF.dr along the given curve C is approximately equal to 3.66.

Know more about integral here:

https://brainly.com/question/27419605

#SPJ11

The ratios of corresponding sides are as follows:8/6 = 12/9 =20/h Simplifying the first two fractions gives:4/3 = 4/3 = 20/h Multiplying both sides by h gives:4h/3 = 4h/3 = 20 Simplifying the first two fractions gives:4h = 4h = 60 Dividing both sides by 4 gives:h = 15The height of triangle LP is 15 cm.

The three right triangles are similar. The acute angles LD, LH, and LP are all measured to be approximately 34.7°. The side lengths for each triangle are as follows:triangle LD has a base of 8 cm and a height of 6 cm.triangle LH has a base of 12 cm and a height of 9 cm.triangle LP has a base of 20 cm and a height of h cm. It is required to calculate h.The triangles are said to be similar because the angles are the same, which makes the ratios of their corresponding sides equal. The ratios of corresponding sides are as follows

:8/6 = 12/9 = 20/h

Simplifying the first two fractions gives:

4/3 = 4/3 = 20/h

Multiplying both sides by h gives

:4h/3 = 4h/3 = 20

Simplifying the first two fractions gives:

4h = 4h = 60

Dividing both sides by 4 gives:h = 15The height of triangle LP is 15 cm.

To know more about fractions visit:

https://brainly.com/question/10354322

#SPJ11

The standard deviation S for the sampling distribution of the sample mean, is calculated as follows:S = σ/√nwhere σ is the population standard deviation and n is the sample size. Thus, substituting the values of σ = 3.6 and n = 5, we get;S = 3.6/√5S = 1.612The value of x = 0 since we are looking for the standard deviation of the sampling distribution of the sample mean. Therefore, the answer is S = 1.612 and x = 0.

The standard deviation S is a parameter because it is calculated using population values, in this case, σ. On the other hand, the mean of the sample is a statistic because it is calculated from the sample data.(c) Since the sample size n is less than 30, the conditions for using the Central Limit Theorem are not fulfilled. The Central Limit Theorem requires a sample size greater than or equal to 30.

To know more  about substituting visit :-

https://brainly.com/question/29383142

#SPJ11

The rank of matrix A = 6, dim row A = 6 and dim col A = 6.

Given a 7 × 9 matrix, if the null space of the matrix is 3-dimensional, then to find the rank of matrix A, dimension of row space and dimension of column space. Let us use rank-nullity theorem which states that the dimension of the null space added to the rank of a matrix equals the number of columns of the matrix.Let N(A) be the null space of matrix A.

ThenNullity (A) + Rank (A) = number of columns of A => Nullity (A) + Rank (A) = 9Nullity (A) = 3Dim N(A) = 3We know that dim Row (A) = Rank (A)Thus, Rank (A) = 9 - Nullity (A) = 9 - 3 = 6Dim Row (A) = Rank (A) = 6To find dimension of column space we know that dim Column (A) = number of non-zero columns in Row Echelon Form of AThus, 3 columns are zero. Therefore, 9 - 3 = 6 columns are non-zeroHence, dim Col (A) = 6Therefore, rank of matrix A = 6, dim row A = 6 and dim col A = 6.

To know more about matrix visit :-

https://brainly.com/question/29132693

#SPJ11

Based on the Alternating Series Test, the given series converges.

To determine whether the series converges or diverges, let's analyze the given series:

∑(n=1 to ∞) [(-1)^n - 1] / √n

The series contains a term with an alternating sign, and the denominator involves the square root of n. We can use the Alternating Series Test to determine convergence.

Alternating Sign: The term (-1)^n - 1 alternates between -2 and 0 as n increases. It does not have a constant sign, so the first condition of the Alternating Series Test is satisfied.

Decreasing Absolute Value: Let's consider the absolute value of the terms:

|(-1)^n - 1| / √n

As n increases, the denominator √n increases, and the numerator (-1)^n - 1 alternates between -2 and 0. Since both the numerator and denominator are non-increasing, the second condition of the Alternating Series Test is satisfied.

Therefore, based on the Alternating Series Test, the given series converges.

Answer: C (Convergence)

For more questions on converges

https://brainly.com/question/31328203

#SPJ8

The absolute value of the test statistic is 5.83

From the question, we have the following parameters that can be used in our computation:

n = 49 and x = 27

n = 59 and x = 5

This means that

p₁ = 27/49 and p₂ = 5/59

The test statistic for the hypothesis test can be calculated using

z = (p₁ - p₂) /√((p₁*(1 - p₁)/n₁) + (p₂* (1 - p₂)/n₂))

Substitute the known values in the above equation, so, we have the following representation

z = ((27/49) - (5/59)) / √(((27/49)(22/49)/49) + ((5/59)(54/59)/59))

Evaluate

z = 5.83

Hence, the absolute value of the test statistic is 5.83

Read more about test statistic at

https://brainly.com/question/4621112

#SPJ4

Question

Sample data shows that 27 out of 49 students with cell phones passed the course and 5 out of 59 students without cell phones passed the course. Find the absolute value of the test statistic when testing the claim that the proportion of students with cell phones passed the course is not more than the proportion of students without cell phones passed the course. (Round your answer to nearest hundredth. Hint: The correct test statistic is positive.)

The probability of the complementary event, that is, the probability that none of the biscuits selected is a chocolate biscuit, is given by: P(A') = C(5, 3)/C(9, 3) = 10/84 = 5/42. Therefore, P(A) = 1 - P(A') = 1 - 5/42 = 37/42.  

Answer: P(A) = 37/42.

a) Probability that of the 3 biscuits randomly selected, 1 is chocolate, 1 is raisin and 1 is peanut butterChantelle has 4 chocolate biscuits, 3 raisin biscuits, and 2 peanut butter biscuits. Therefore, the total number of ways to select three biscuits from 9 is given by n(S) = C(9, 3) = 84. Now, let A be the event that of the 3 biscuits randomly selected, 1 is chocolate, 1 is raisin, and 1 is peanut butter. Then the number of ways to select such biscuits is given by C(4, 1) × C(3, 1) × C(2, 1) = 24.Thus, P(A) = n(A)/n(S) = 24/84 = 2/7. Answer: P(A) = 2/7.

b) Probability that only chocolate biscuits are selected Let A be the event that only chocolate biscuits are selected. Then the number of ways to select three chocolate biscuits from the 4 chocolate biscuits is given by C(4, 3) = 4. Therefore, P(A) = n(A)/n(S) = 4/84 = 1/21. Answer: P(A) = 1/21.

c) Probability that at least 1 one biscuit is chocolate Let A be the event that at least 1 biscuit is chocolate. The probability of the complementary event, that is, the probability that none of the biscuits selected is a chocolate biscuit, is given by: P(A') = C(5, 3)/C(9, 3) = 10/84 = 5/42. Therefore, P(A) = 1 - P(A') = 1 - 5/42 = 37/42. Answer: P(A) = 37/42.

To know more about  probability visit:

https://brainly.com/question/32004014

#SPJ11

Based on the given data and the results of the t-test, we have evidence to support the claim that the mean score is above 70 at a 10% alpha level.

To test the claim that the mean score is above 70, we will conduct a one-sample t-test. The null hypothesis is that the mean score is equal to 70, and the alternative hypothesis is that the mean score is greater than 70.

First, we need to calculate the sample mean and standard deviation. The sample mean is (62 + 92 + 75 + 68 + 83 + 95) / 6 = 78.33, and the sample standard deviation can be calculated using the formula:

s = sqrt((1/(n-1)) * sum(xi - xbar)^2)

where n is the sample size, xi is each individual score, xbar is the sample mean. Plugging in the values, we get:

s = sqrt((1/(6-1)) * ((62-78.33)^2 + (92-78.33)^2 + (75-78.33)^2 + (68-78.33)^2 + (83-78.33)^2 + (95-78.33)^2))

s = 12.76

Next, we need to calculate the t-statistic using the formula:

t = (xbar - mu) / (s / sqrt(n))

where mu is the hypothesized population mean, which is 70 in this case. Plugging in the values, we get:

t = (78.33 - 70) / (12.76 / sqrt(6))

t = 1.64

Using a t-distribution table with degrees of freedom equal to n - 1 = 5 and a one-tailed test at a significance level of alpha = 0.10, we find that the critical value of t is 1.476.

Since our calculated t-value of 1.64 is greater than the critical value of t, we reject the null hypothesis and conclude that there is sufficient evidence to support the claim that the mean score is above 70 at a 10% alpha level.

To know more about t-test refer here:

https://brainly.com/question/30114401#

#SPJ11

A probability distribution is a statistical function that explains all the possible values of a random variable and their respective probabilities.

To restore the probability mass function of a random variable, we need to sum up all the probabilities. In this question, the sum of all the probabilities is equal to 1, as follows:

P x (x) = 5k + 0.24 + 3k + 0.2 = 1

Simplifying further, we get:8k + 0.44 = 1Therefore,

8k = 1 – 0.44 = 0.56k = 0.07

The probability mass function is given below :

x -2 -1 1 4Px(x) 0.35 0.24 0.21 0.

To find the probability that X is less than 3, we need to add up the probabilities for

X = -2, X = -1 and X = 1. P(X < 3) = P(X = -2) + P(X = -1) + P(X = 1) = 0.35 + 0.24 + 0.21 = 0.8

Similarly, to find the probability that X is greater than 3, we need to add up the probabilities for

X = 4.  P(X > 3) = P(X = 4) = 0.20

Therefore, the probability that X is less than 3 and greater than 3 is 0.8 and 0.2, respectively.

To know more about statistical visit:

https://brainly.com/question/32201536

#SPJ11

a) The mean of the sampling distribution would be 0.39. This is because the true proportion of smartphone users is given as 39%, and when we draw a random sample of investors, the sample proportion of smartphone users would be expected to be close to the true proportion.

b) The mean cannot be determined. This statement is incorrect. Based on the information given, the mean of the sampling distribution can be determined and it would be 0.39.

c) If the sample size were increased to 400, the mean would still be the same.

The shape and symmetry characteristics of the sampling distribution would remain approximately the same. Increasing the sample size helps to improve the accuracy and precision of estimating the proportion, but it does not affect the mean. The mean would still be 0.39, reflecting the true proportion of smartphone users.

Therefore, the correct answer is option OA. No, the shape and symmetry characteristics would still be approximately the same, and the mean would still be the same.

To know more about sampling distribution refer here:

https://brainly.com/question/31465269

#SPJ11

Therefore, the probability that among the students in the sample exactly four are male is 0.2508. So, the correct option is (c) 0.2508.

Given that the student body of a large university consists of 60% female students. A random sample of 9 students is selected. We need to find the probability that among the students in the sample exactly four are male. Here, n = 9, probability of success = 0.4, probability of failure = 0.6We can find the probability by using the formula, P(X = x) = nCx * p^x * q^(n - x)Where, P(X = x) = Probability of exactly x successes in n trials p = probability of success q = probability of failure n Cx = n! / x!(n - x)! Hence, the required probability is given by, P(4 males out of 9) = 9C4 * (0.4)^4 * (0.6)^5= 126 * 0.0256 * 0.07776= 0.2508

Know more about probability here:

https://brainly.com/question/30034780

#SPJ11

The function y = sin(θ - 90°) can be rewritten as y = sin(θ - π/2). Let's analyze the properties of this function.

The amplitude of the function sin(θ - π/2) is 1. The amplitude represents the maximum value the function reaches from the midline.

The period of the function sin(θ - π/2) is 2π. The period represents the length of one complete cycle of the function.

The phase shift of the function sin(θ - π/2) is π/2. The phase shift indicates the horizontal shift of the function from the standard sine function.

To graph the function, we start with the standard sine function and apply the phase shift. The graph will have the same shape as the sine function, but it will be shifted horizontally by π/2 units.

The domain of the function is all real numbers since the sine function is defined for any value of θ.

The range of the function y = sin(θ - π/2) is [-1, 1], which means the function takes on values between -1 and 1, inclusive. The range represents the set of all possible y-values of the function.

Overall, the function y = sin(θ - π/2) has an amplitude of 1, a period of 2π, a phase shift of π/2, and its graph is a sinusoidal wave shifted horizontally by π/2 units. The domain is all real numbers, and the range is [-1, 1].

To know more about amplitude click here: brainly.com/question/9525052

#SPJ11

The number of cubic centimeters of the rectangular prism is  151. 7cm³

The formula for calculating the volume of a rectangular prism is expressed as;

V = lwh

Such that the parameters of the formula are expressed as;

Substitute the values, we have;

Volume = 4.1 × 10 × 3.7

Multiply the values, we get;

Volume = 151. 7cm³

Learn more about volume at: https://brainly.com/question/1972490

#SPJ1