a. A Vector in R2 is different froom a vector in R3. Hence the answer is false.
b. Vector 2u is not a linear combination of u and v. The answer is false.
c. We can obtain any vector in R 2 as a linear combination of u and v. The answer is false.
d. The Span {u,v} is not always visualized as a plane through the origin. The answer is false.
e. The augmented matrix [v1 v2 v3 b] corresponds to the system of linear equations x1v1 + x2v2 + x3v3 = b. The answer is true.
How to determine the nature of vectorA vector in R2 has two components (x,y), while a vector in R3 has three components (x,y,z). Therefore, a vector in R2 cannot be a vector in R3 because the number of component in each vector is different.
The vector 2u is a scalar multiple of u, not a linear combination of u and v. A linear combination of u and v would have the form au + bv, where a and b are scalars.
In order to obtain any vector in R2 as a linear combination of u and v, u and v must be linearly independent. If u and v are linearly dependent (i.e., one is a scalar multiple of the other), then the span of {u,v} is a line, not all of R2.
The span of {u,v} is the set of all linear combinations of u and v, which forms a plane through the origin if and only if u and v are linearly independent. If u and v are linearly dependent, then the span of {u,v} is a line through the origin.
The augmented matrix [v1 v2 v3 b] corresponds to the system of linear equations:
x1v1 + x2v2 + x3v3 = b
Hence, the solution set of this system of equations is the same as the solution set of the equation given in the question.
Learn more on vectors on https://brainly.com/question/25705666
#SPJ4
For the following graph questions either give an example graph or prove that there are none. You can draw graphs by hand. Make sure the drawing is neat and clear! If you include a photo, make sure there is no glare, reflection, or other obstruction.
1. A simple digraph with indegrees 0, 1, 2, 4, 5 and outdegrees 0, 3, 3, 3, 3.
2. A simple digraph with indegrees 0, 1, 2, 2 and outdegrees 0, 1, 1, 3.
We can draw a graph satisfying these conditions. One possible such graph is shown below:graph(400,400,-1,4,-1,4,
circle(0,2,0.2),circle(1,3,0.2),circle(1,1,0.2),circle(2,2,0.2),
arrow(0,2,1,3),arrow(1,3,2,2),
arrow(0,2,1,1),arrow(1,1,2,2),arrow(2,2,1,3)
)
1. Simple digraph with indegrees 0, 1, 2, 4, 5 and outdegrees 0, 3, 3, 3, 3.Answer:We note that the sum of the indegrees is equal to the sum of the outdegrees: $0 + 1 + 2 + 4 + 5 = 3 + 3 + 3 + 3 + 0 = 12$.Therefore, we can draw a graph satisfying these conditions. One possible such graph is shown below:graph(400,400,-1,6,-1,4,
circle(0,2,0.2),circle(1,1,0.2),circle(2,3,0.2),circle(3,3,0.2),circle(4,3,0.2),circle(5,2,0.2),
arrow(0,2,1,1),arrow(1,1,2,3),arrow(2,3,4,3),arrow(3,3,5,2),
arrow(1,1,2,3),arrow(2,3,3,3),arrow(4,3,5,2)
)
2. Simple digraph with indegrees 0, 1, 2, 2 and outdegrees 0, 1, 1, 3.Answer:Again, we note that the sum of the indegrees is equal to the sum of the outdegrees: $0 + 1 + 2 + 2 = 1 + 1 + 3 + 0 = 5$.Therefore, we can draw a graph satisfying these conditions. One possible such graph is shown below:graph(400,400,-1,4,-1,4,
circle(0,2,0.2),circle(1,3,0.2),circle(1,1,0.2),circle(2,2,0.2),
arrow(0,2,1,3),arrow(1,3,2,2),
arrow(0,2,1,1),arrow(1,1,2,2),arrow(2,2,1,3
)
Learn more a Digraph here,Type the word that begins with the digraph gu and ends with double e.
https://brainly.com/question/30574521
#SPJ11
Show that in every voronoi diagram of n ≥ 3 places, there is a place whose voronoiregion
is bounded by fewer than 6 edges.
=> Why can I use the Euler formula
n-e+f = 2 respectively e <= 2n-6
To show that in every Voronoi diagram of n ≥ 3 places, there is a place whose Voronoi region is bounded by fewer than 6 edges, we can use the Euler formula:
n - e + f = 2.
Where n is the number of places, e is the number of edges in the Voronoi diagram, and f is the number of faces in the Voronoi diagram. Since every Voronoi region is a face, the number of faces is equal to the number of places, f = n. Also, since each edge is a boundary between two Voronoi regions, the number of edges e is equal to twice the number of Voronoi regions, e = 2r.
Therefore, the Euler formula can be rewritten as follows which means that the number of Voronoi regions is always equal to (n - 2)/2. Now, assume that every Voronoi region is bounded by at least 6 edges. Then, the total number of edges in the Voronoi diagram is at least 6 times the number of Voronoi regions, e ≥ 6r.Substituting r = (n - 2)/2, we get:e ≥ 6(n - 2)/2 = 3n - 6which contradicts the fact that the number of edges in any planar graph is at most 3n - 6 (where n ≥ 3) according to the Euler formula. Hence, our assumption that every Voronoi region is bounded by at least 6 edges must be false. Therefore, there exists at least one Voronoi region that is bounded by fewer than 6 edges.
To know more about Voronoi visit :
https://brainly.com/question/29657983
#SPJ11
Please make a truth table and put if the question is Invalid or Valid and place an X on the line where it is Valid or Invalid.
Thank you!
P -> Q |- Q -> P
The argument "P implies Q, therefore Q implies P" is a valid argument, as indicated by the truth table. In all cases where P implies Q is true, the statement Q implies P is also true.
To determine the validity of the argument "P implies Q, therefore Q implies P," we can construct a truth table. The table will include columns for P, Q, P implies Q, and Q implies P. We will evaluate all possible combinations of truth values for P and Q and determine the resulting truth values for P implies Q and Q implies P.
The truth table for the argument is as follows:
| P | Q | P implies Q | Q implies P |
|---|---|-------------|-------------|
| T | T | T | T |
| T | F | F | T |
| F | T | T | F |
| F | F | T | T |
From the truth table, we can observe that in all cases where P implies Q is true, the statement Q implies P is also true. Therefore, the argument "P implies Q, therefore Q implies P" is valid.
To learn more about truth table click here: brainly.com/question/30588184
#SPJ11
Mac's credit card statement included $2087.00 in cash advances and $80.22 in interest charges. The interest rate on the statement was 1121% p.a. For how many days was Mac charged interest?
Given that Mac's credit card statement included $2087.00 in cash advances and $80.22 in interest charges.
The interest rate on the statement was 1121% p.a.
To calculate the number of days Mac was charged interest, we need to use the following formula for simple interest:I = P × r × t WhereI is the interest,P is the principal amount,r is the rate of interest per annum,t is the time in days
The value of I is given as $80.22, the value of P is $2087.00, and the value of r is 1121% per annum.
However, we need to express the rate of interest in terms of days. To do this, we divide the rate by the number of days in a year, that is, 365 days.
We get;r = 1121/365% per day = 3.0712% per daySubstituting the values into the formula,I = P × r × t80.22 = 2087.00 × 3.0712/100 × t80.22 = 0.06399944t
Simplifying for t,t = 80.22/0.06399944t = 1253.171
Approximately, Mac was charged interest for 1253 days.
To know more about Mac's credit visit:
brainly.com/question/22260429
#SPJ11
Question 6 of 10
The vertex of this parabola is at (-4,-1). When the y-value is 0, the x-value is 2.
What is the coefficient of the squared term in the parabola's equation?
A. -3
B. 3
C. -6
D. 6
The coefficient of the squared term in the parabola's equation is 1/36. None of the given options (A, B, C, or D) match this value exactly.
To find the coefficient of the squared term in the parabola's equation, we need to use the vertex form of a parabola:
y = a(x - h)^2 + k
where (h, k) represents the vertex of the parabola.
From the given information, we know that the vertex is at (-4, -1). Substituting these values into the vertex form, we get:
y = a(x - (-4))^2 + (-1)
y = a(x + 4)^2 - 1
Now, we can use the second piece of information that when the y-value is 0, the x-value is 2. Substituting these values into the equation, we have:
0 = a(2 + 4)^2 - 1
0 = a(6)^2 - 1
0 = 36a - 1
Solving for a, we add 1 to both sides:
1 = 36a
Finally, divide both sides by 36:
a = 1/36
In the equation for the parabola, the squared term's coefficient is 1/36. None of the available choices (A, B, C, or D) exactly match this value.
for such more question on coefficient
https://brainly.com/question/1038771
#SPJ8
Koshikawa, a manufacturer of exercise equipment purchases the pulley section of the equipment from a supplier who lists these prices: less than 1,000, RM5 each; 1,000 to 3,999, RM4.95 ench; 4,000 to 5,999 , RM4.90 each; and 6,000 or more, RM4.85 each. Ordering costs are RM50, annual carrying costs per unit are 40 percent of purchase cost, and annual usage is 4,900 pulleys. Determine an order quantity that will minimize the total cost.
The order quantity that will minimize the total cost is approximately 355 pulleys.
Annual demand or usage (D) = 4,900 pulleys
Ordering cost per order (S) = RM50
Annual carrying cost per unit (H) = 40% of purchase cost
To determine the order quantity that minimizes the total cost, we'll use the Economic Order Quantity (EOQ) formula:
EOQ = √((2 * D * S) / H)
First, let's calculate the purchase cost per unit based on the quantity ranges provided by the supplier:
For less than 1,000 pulleys: RM5 each
For 1,000 to 3,999 pulleys: RM4.95 each
For 4,000 to 5,999 pulleys: RM4.90 each
For 6,000 or more pulleys: RM4.85 each
Based on the given information, the quantity range of 6,000 or more pulleys offers the lowest purchase cost per unit at RM4.85 each.
Now, let's calculate the EOQ using the formula:
EOQ = √((2 * 4,900 * 50) / (0.40 * 4.85))
Simplifying the equation gives:
EOQ = √(490,000 / 3.88)
EOQ ≈ √126,288.66
EOQ ≈ 355.46
Therefore, the order quantity that will minimize the total cost is approximately 355 pulleys.
Learn more about quantity from the given link:
https://brainly.com/question/30724559
#SPJ11
Find the sum and difference for the following pair of mixed
numbers keeping your numbers as mixed numbers. Show all of your
thought processes.
The sum of 3 2/5 and 1 3/4 is 4 23/20, while the difference between the two numbers is 2 - 7/20.
To find the sum and difference of the mixed numbers, let's consider the pair: Mixed Number 1: 3 2/5
Mixed Number 2: 1 3/4
For the sum:
First, we add the whole numbers: 3 + 1 = 4.
Next, we add the fractions: 2/5 + 3/4.
To add the fractions, we need a common denominator, which is 20 (the least common multiple of 5 and 4).
Converting the fractions to have a denominator of 20, we get 8/20 + 15/20.
Adding the fractions, we get 23/20.
Therefore, the sum of the mixed numbers is 4 23/20.
For the difference:
We subtract the whole numbers: 3 - 1 = 2.
Then we subtract the fractions: 2/5 - 3/4.
Again, we find a common denominator of 20.
Converting the fractions to have a denominator of 20, we get 8/20 - 15/20.
Subtracting the fractions, we get -7/20.
Hence, the difference of the mixed numbers is 2 - 7/20.
To learn more about whole number click here
brainly.com/question/19161857
#SPJ11
Use the information y = x² + 2 Ay = dy = to evaluate and compare Ay and dy. (Round your answers to four decimal places.) x = -4 Ax dx = 0.01 1
The change in y (Δy) is approximately -2.2863, and the derivative of y (dy) is approximately 2.5600.
To evaluate and compare delta y (Δy) and dy, we need to find the respective values of y for x and x + dx.
x = -4
Δx = dx = 0.01
y = x^4 + 2
Let's calculate the values:
For x = -4:
y = (-4)^4 + 2
y = 256 + 2
y = 258
For x + dx = -4 + 0.01 = -3.99:
y' = (-3.99)^4 + 2
y' = 253.713672 + 2
y' = 255.713672
Now, we can calculate delta y (Δy):
Δy = y' - y
Δy = 255.713672 - 258
Δy = -2.286328
Therefore, Δy ≈ -2.2863.
Finally, we can calculate dy:
dy = f'(x) * dx
dy = (4x^3) * dx
dy = (4 * (-4)^3) * 0.01
dy = (4 * 64) * 0.01
dy = 2.56
Therefore, dy ≈ 2.5600.
Comparing the values, we have:
Δy ≈ -2.2863
dy ≈ 2.5600
From the comparison, we can see that Δy and dy have different values and signs. Δy represents the change in the function value between two points, while dy represents the derivative of the function at a specific point multiplied by the change in x.
Learn more about derivative here:
https://brainly.com/question/29144258
#SPJ11
The complete question is:
Use the information to evaluate and compare delta y and dy. (Round your answers to four decimal places.)
x = -4 delta x =dx = 0.01 1 y=x^4+2
7. Use a protractor to draw a \( 48^{\circ} \) angle. Then use a straightedge and compass to construct the bisector of the angle.
To draw a 48 degree angle using a protractor, place the protractor on a piece of paper so that the 0 degree mark is at the edge of the paper and the 48 degree mark is lined up with a point on the paper. Then, draw a line from the 0 degree mark to the 48 degree mark.
A protractor is a semicircular tool that is used to measure angles. It is divided into 180 degrees, with each degree marked off. To draw a 48 degree angle using a protractor, place the protractor on a piece of paper so that the 0 degree mark is at the edge of the paper and the 48 degree mark is lined up with a point on the paper. Then, draw a line from the 0 degree mark to the 48 degree mark.
A straightedge is a tool that is used to draw straight lines. A compass is a tool that is used to draw arcs. To construct the bisector of a 48 degree angle using a straightedge and compass, first draw a line that bisects the angle.
This can be done by placing the compass point at the vertex of the angle and drawing an arc that intersects the sides of the angle. Then, place the straightedge on the two points where the arc intersects the sides of the angle and draw a line that passes through both points. This line will bisect the angle.
Visit here to learn more about semicircular:
brainly.com/question/22809744
#SPJ11
Solve the initial value problem: \[ y^{\prime \prime}+y=u_{3}(t), \quad y(0)=0, \quad y^{\prime}(0)=1 \]
The solution of the initial value problem is [tex]\[y(t) = u_1(t) - u_2(t) \cos t - u_3(t) \sin t + \frac{1}{2} t^2 u_3(t)\][/tex]
The differential equation,[tex]\[y'' + y = u_3(t)\][/tex]
The initial conditions are, [tex]\[y(0) = 0, y'(0) = 1\][/tex]
Solution: Firstly, solve the homogenous equation, [tex]\[y'' + y = 0\][/tex]
The characteristic equation is ,[tex]\[m^2 + 1 = 0\][/tex]
Solving this, we get the roots, [tex]\[m_1 = i, m_2 = -i\][/tex]
Therefore, the general solution of the homogenous equation is,
[tex]\[y_h(t) = c_1 \sin t + c_2 \cos t\][/tex]
Now, let's find the particular solution. [tex]\[y'' + y = u_3(t)\]\[y_p(t) = A\][/tex]
Substituting in the differential equation, [tex]\[0 + A = u_3(t)\][/tex]
Taking the Laplace transform of both sides, [tex]\[A = L[u_3(t)] = \frac{1}{s^3}\][/tex]
Therefore, the particular solution is,
[tex]\[y_p(t) = \frac{1}{s^3}\][/tex]
Thus, the general solution of the differential equation is, [tex]\[y(t) = y_h(t) + y_p(t) = c_1 \sin t + c_2 \cos t + \frac{1}{s^3}\][/tex]
Using the initial conditions, [tex]\[y(0) = 0, y'(0) = 1\][/tex]
we get, [tex]\[c_1 + \frac{1}{s^3} = 0, c_2 + s + 0 = 1\][/tex]
Therefore, [tex]\[c_1 = -\frac{1}{s^3}\][/tex] and [tex]\[c_2 = 1 - s\][/tex]
The solution of the initial value problem is, [tex]\[y(t) = -\frac{1}{s^3} \sin t + (1 - s) \cos t + \frac{1}{s^3}\][/tex]
Taking the inverse Laplace transform, we get, [tex]\[y(t) = u_1(t) - u_2(t) \cos t - u_3(t) \sin t + \frac{1}{2} t^2 u_3(t)\][/tex]
Therefore, the solution of the given initial value problem is, [tex]\[y(t) = u_1(t) - u_2(t) \cos t - u_3(t) \sin t + \frac{1}{2} t^2 u_3(t)\][/tex]
Thus, the solution of the initial value problem is [tex]\[y(t) = u_1(t) - u_2(t) \cos t - u_3(t) \sin t + \frac{1}{2} t^2 u_3(t)\][/tex]
To know more about initial value problem, visit:
https://brainly.com/question/30547172
#SPJ11
The solution of the given initial value problem and it is: y(t) = sin(t) + K (t)u₃(t).
Given ODE is:
y'' + y = u₃(t)
y(0) = 0
y'(0) = 1
We need to find the particular solution and complementary solution of the ODE and apply the initial conditions to get the final solution.
Complementary solution:
y'' + y = 0
Characteristic equation: r² + 1 = 0
r² = -1
r₁ = i and
r₂ = -i
The complementary solution is:
y_c(t) = c₁ cos(t) + c₂ sin(t)
Particular solution: Since the input is u₃(t), we have the particular solution as y_p(t) = K (t)u₃(t)
where K (t) is the Heaviside function.
Heaviside function: Hence the particular solution is given by:
y_p(t) = K (t)u₃(t)
Now the general solution is given by:
y(t) = y_c(t) + y_p(t)
Therefore,
y(t) = c₁ cos(t) + c₂ sin(t) + K (t)u₃(t)
Applying the initial condition:
y(0) = 0
=> c₁ = 0
y'(0) = 1
=> c₂ = 1
Hence, the solution of the given initial value problem is;
y(t) = sin(t) + K (t)u₃(t)
Conclusion: Therefore, we got the final solution of the given initial value problem and it is: y(t) = sin(t) + K (t)u₃(t).
To know more about value visit
https://brainly.com/question/24503916
#SPJ11
Kay buys land for his wife. He pays $8000 for the land with $2000 down. The agent charges add-on interest of 3.5% per year, Kay will pay the loan in 36 equal monthly payments.
1. Find the total amount of interest he will pay
2. Find the monthly payments
3. Find the APR value( to the nearest half percent
4. Find the (a) unearned interest(b) the payoff amount if he repays the loan with 12 months remaining.
The total amount of the loan is $8000. The remaining balance is $2535.68. The payoff amount is:$2535.68 + $17.50 = $2553.18
Here are the solutions to the given problem:
1. The amount of loan Kay has taken is $6000 ($8000 - $2000).
Add-on interest is calculated based on the original loan amount of $6000.
The total amount of interest he will pay is:
$6000 × 0.035 × \frac{3}{12} = $52.50
So, he will pay $52.50 in total interest.
2. The monthly payment is calculated by dividing the total amount of the loan plus interest by the number of payments.
The total amount of the loan is the sum of the down payment and the loan amount ($2000 + $6000 = $8000).
The total amount of interest is $52.50.
The number of payments is 36.
The monthly payment is:
{$8000 + $52.50}{36} approx $227.68
So, the monthly payments are $227.68.
3. The annual percentage rate (APR) is the percentage of the total amount of interest charged per year, expressed as a percentage of the original loan amount.
The total amount of interest charged is $52.50.
The original loan amount is $6000.
The duration of the loan is 36 months. The APR value (to the nearest half percent) is:
APR = \frac{($52.50 × 12)}{$6000 × 3} = 0.07
= 7 \%
So, the APR value is 7%.4.
(a) The unearned interest is the interest that Kay hasn't yet paid but has been charged. If Kay repays the loan before the end of the 36-month period, he will owe the remaining balance on the loan, including any unearned interest.
After 24 months, there are 12 remaining payments. The unearned interest is:
\frac{36-24}{36} × $52.50 = $17.50
So, the unearned interest is $17.50.
(b) If he repays the loan with 12 months remaining, the payoff amount will be the remaining balance plus any unearned interest. The remaining balance is calculated by subtracting the sum of the payments made from the total amount of the loan.
The sum of the payments made is $227.68 × 24 = $5464.32.
To learn more on interest:
https://brainly.com/question/25720319
#SPJ11
Given l1 and l2 are two lines with gradient m1 and m2. Write the property of the gradients if l1 and l2 are (i) parallel (1) (ii) perpendicular (1) (iii) overlapping (2) (b) Given l1:y=x+1 l2:y=1−x li :y=2+x l4: 2y=2+2x. Determine which of these lines are parallel, perpendicular or overlapping.
The lines
- l1 and l4 are overlapping.
- l1 and l2 are perpendicular.
- l1 and li are parallel.
In short, The given lines l1, l2, li, and l4 exhibit overlapping, perpendicular, and parallel relationships based on their equations and gradients.
(i) If two lines are parallel, their gradients are equal.
(ii) If two lines are perpendicular, the product of their gradients is -1. In other words, m1 * m2 = -1.
(iii) If two lines are overlapping, they have the same equation or the same gradient.
Now let's analyze the given lines:
l1: y = x + 1 (gradient m1 = 1)
l2: y = 1 - x (gradient m2 = -1)
li: y = 2 + x (gradient mi = 1)
l4: 2y = 2 + 2x (rearranging the equation to slope-intercept form, we get y = x + 1, same as l1)
Based on the information above:
- l1 and l4 have the same equation, so they are overlapping.
- l1 and l2 have gradients that are negative reciprocals of each other (-1 * 1 = -1), so they are perpendicular.
- li has the same gradient as l1, so they are parallel.
To know more about gradients click here:
https://brainly.com/question/30249498#
#SPJ11
Determine dimo(Q[√2+√3]). [Hint: Recall from Exercise 4(i) in Section 5 that Q[√2 + √√3] = Q[√2, √3], and check Lemma 4.2.] Lemma 4.2 Let U be a ring, and let S and T be subfields of U with SCT. Assume that dims(T) and dimŢ(U) are finite. Then dims (U) = dims(T)·dimŢ(U).
The dimension of Q[√2 + √3] (or Q[√2, √3]) is 4.
we can use the dimensions of the subfields to determine the dimension of the larger field.
Given that Q[√2 + √3] = Q[√2, √3], we can consider the field extension Q[√2, √3].
To find dimQ[√2, √3], we need to find the dimensions of the subfields Q[√2] and Q[√3] and then apply Lemma 4.2.
First, let's determine the dimensions of Q[√2] and Q[√3]:
dimQ[√2] = 2
The field Q[√2] contains the elements of the form a + b√2, where a and b are rational numbers. Since the basis of Q[√2] consists of 1 and √2, the dimension is 2.
dimQ[√3] = 2
Similarly, the field Q[√3] contains the elements of the form a + b√3, where a and b are rational numbers. The basis of Q[√3] consists of 1 and √3, so the dimension is also 2.
Now we can apply Lemma 4.2:
dims(Q[√2, √3]) = dims(Q[√2]) · dim(Q[√3])
dims(Q[√2, √3]) = 2 · 2 = 4
Therefore, the dimension of Q[√2 + √3] (or Q[√2, √3]) is 4.
Learn more about Dimension of field:
brainly.com/question/33120344
#SPJ11
Police Academy Acceptance Exams To qualify for a police academy, applicants are given a test of physical fitness. The scores are normatly distributed with a mean of 67 and a standard deviation of 15 . If only the top 15% of the applicants are selected, find the cutoff score. Round z-value calculations to 2 decimal places and the final answer up to the nearest whole number. Cutoff score
The cutoff score for the police academy acceptance exams can be determined by finding the corresponding z-score for the top 15% of applicants and then converting it back to the original test score scale.
The cutoff score is rounded up to the nearest whole number.
To find the cutoff score, we need to determine the z-score corresponding to the top 15% of applicants. The z-score is a measure of how many standard deviations a particular value is from the mean.
Since the scores are normally distributed with a mean of 67 and a standard deviation of 15, we can use the z-score formula:
z = (x - μ) / σ
where z is the z-score, x is the test score, μ is the mean, and σ is the standard deviation.
To find the z-score corresponding to the top 15% of applicants, we need to find the z-value that leaves 15% of the distribution to the right. We can use a standard normal distribution table or a statistical calculator to find this value.
Once we have the z-score, we can convert it back to the original test score scale using the formula:
x = z * σ + μ
where x is the test score, z is the z-score, σ is the standard deviation, and μ is the mean.
Finally, we round up the cutoff score to the nearest whole number since test scores are typically integers.
Learn more about z-score from the given link:
https://brainly.com/question/29187588
#SPJ11
help me
1. A function is defined as \( f(x)=x^{m} \). Explain in details how the \( m \) th derivative of this function, which is \( f^{(m)}(x) \) is equal to \( m \) !
The function f(x) = xm is a monomial function. The monomial function is an algebraic function of the form f(x) = xn where n is a non-negative integer. If we derive this function repeatedly, we'll get some interesting results. Let us begin with the first derivative of f(x).f(x) = xm∴ f'(x) = m x^(m-1)
We can use the power rule to compute the first derivative. If we differentiate f(x) again, we'll get a new derivative, f''(x).f(x) = xm∴ f'(x) = m x^(m-1)∴ f''(x) = m (m-1) x^(m-2)
Again, using the power rule we can differentiate f'(x) to find f''(x).We may repeat this process as many times as we like. As a result, we may deduce that:
f(x) = xm∴ f'(x) = m x^(m-1)∴ f''(x) = m (m-1) x^(m-2)∴ f'''(x) = m (m-1) (m-2) x^(m-3)...∴ f^(m)(x) = m! x^(m-m) = m!
Therefore, the mth derivative of f(x) = xm is m! When we derive f(x) = xm, we obtain the mth derivative of the function f(x). The monomial function f(x) = xm is an algebraic function of the form f(x) = xn where n is a non-negative integer. We can use the power rule to differentiate this function to obtain its first derivative f'(x).f(x) = xm∴ f'(x) = m x^(m-1)The power rule can be used to differentiate f(x) again to obtain its second derivative f''(x).
f(x) = xm∴ f'(x) = m x^(m-1)∴ f''(x) = m (m-1) x^(m-2)
We can repeat this process and differentiate f''(x) to obtain its third derivative f'''(x). This pattern can be repeated, and the mth derivative of f(x) can be calculated as follows:
f(x) = xm∴ f'(x) = m x^(m-1)∴ f''(x) = m (m-1) x^(m-2)∴ f'''(x) = m (m-1) (m-2) x^(m-3)...∴ f^(m)(x) = m! x^(m-m) = m!
Therefore, the mth derivative of f(x) = xm is m!
The function f(x) = xm is a monomial function. When we derive this function repeatedly, we obtain the mth derivative of the function f(x), which is equal to m!. Therefore, we can say that if we derive f(x) m times, we will get the value m!.
To learn more about monomial function visit:
brainly.com/question/9183135
#SPJ11
A company makes three typos of candy and packages them in three assortments. Assortment I contains 4 cherry, 4 lemon, and 12 lime candies, and sells for a profit of $4 o0 Assortment 11 contaliss 12 cherfy, 4 lemon, and 4 lime candies, and sells for a profit of $3.00. Assortment al contains 8 cherry, 8 lenson, and 8 lime candles, and selis for a profit of $5.00. They can make 4,800 cherry, 3,800 lenwon, and 6,000 lime cand es weokly. How many boxes of each type should the company produce each week in order to maxinste its profit (assuming that all boxes produced can be sold)? What is the maximum piofir? Select the conect choice below and fill in any answer boxes within your choice A. The maximumprofit is 4 when boxes of assortment 1. boxes of assortment il and boxes of assorinent ill are produced B. There is no way for the company to maxmure hs profit
The maximum profit is 4 when 175 boxes of assortment I, 225 boxes of assortment II, and 350 boxes of assortment III are produced.
Assortment I contains 4 cherry, 4 lemon, and 12 lime candies, and sells for a profit of $4 o0Assortment 11 contaliss 12 cherfy, 4 lemon, and 4 lime candies, and sells for a profit of $3.00.Assortment al contains 8 cherry, 8 lenson, and 8 lime candles, and selis for a profit of $5.00.
They can make 4,800 cherry, 3,800 lenson, and 6,000 lime cand es weokly.We are asked to find out how many boxes of each type should the company produce each week to maximize its profit and what is the maximum profit.
Let's suppose that the company produces x boxes of assortment I, y boxes of assortment II, and z boxes of assortment III in a week.So, total cherries required would be 4x + 12y + 8zTotal lemons required would be 4x + 4y + 8zTotal limes required would be 12x + 4y + 8z.
Given the production constraints, the following linear inequalities hold:4x + 12y + 8z ≤ 4,800 ----(1)4x + 4y + 8z ≤ 3,800 ----(2)12x + 4y + 8z ≤ 6,000 ----(3).
The objective function is to maximize the profit that is 4x + 3y + 5z.To solve the problem graphically, we first graph the feasible region obtained by the above inequalities as shown below:
The vertices of the feasible region are:(0,0,750),(0,317,425),(175,225,350),(200,125,350), and (300,0,350).
Next, we compute the value of the objective function at each vertex:(0,0,750) => 5z = $3,750 => $18,750(0,317,425) => 3y + 5z = $2,906 => $22,328(175,225,350) => 4x + 3y + 5z = $3,175 => $31,750(200,125,350) => 4x + 3y + 5z = $2,725 => $27,250(300,0,350) => 4x = $1,200 => $12,000.
Hence, the maximum profit that the company can earn is $31,750 when the company produces 175 boxes of assortment I, 225 boxes of assortment II, and 350 boxes of assortment III each week.Thus, the correct option is A.
learn more about assortment
https://brainly.com/question/32214951
#SPJ11
whats the hypotenuse of this triangle?
Using trigonometric ratio, the hypothenuse is 20ft
What is trigonometric ratio?
Trigonometric ratios, also known as trigonometric functions or trig functions, are mathematical functions that relate the angles of a right triangle to the ratios of the sides of the triangle. The most common trigonometric ratios are: sine, cosine and tangent.
In this question given;
We have the angle and the opposite of the angle;
opposite = 10ftangle = 30°Using the sine ratio;
sin 30 = opposite / hypothenuse
sin 30 = 10 / x
cross multiply both sides and solve for x;
x = 10/sin30
x = 10 / 0.5
x = 20ft
The hypothenuse is 20ft
Learn more on trigonometric ratio here;
https://brainly.com/question/17155803
#SPJ1
Suppose the grades in a finite mathematics class are Normally distributed with a mean of 75 and a standard deviation of 5 . What is the probability that the average grade for 50 randomly selected students was at least 83 ?
The probability that the average grade for 50 randomly selected students was at least 83 in the finite mathematics class is very close to zero.
To find the probability that the average grade for 50 randomly selected students was at least 83 in a finite mathematics class with a normal distribution, we can use the Central Limit Theorem, which allows us to approximate the distribution of sample means as normal, regardless of the shape of the population distribution.
Step 1: Calculate the standard error of the mean (SEM) using the formula SEM = standard deviation / sqrt(sample size). In this case, the standard deviation is 5 and the sample size is 50.
SEM = 5 / sqrt(50) ≈ 0.707
Step 2: Convert the average grade of 83 into a z-score using the formula z = (x - μ) / SEM, where x is the average grade, μ is the population mean, and SEM is the standard error of the mean.
z = (83 - 75) / 0.707 ≈ 11.31
Step 3: Find the area under the standard normal curve to the right of the z-score obtained in Step 2. This represents the probability of obtaining an average grade of at least 83.
P(Z ≥ 11.31) ≈ 1 - P(Z < 11.31)
Step 4: Consult a standard normal distribution table or use a statistical calculator to find the corresponding probability. Since the z-score is very large, the probability is expected to be extremely small or close to zero. Therefore, the probability that the average grade for 50 randomly selected students was at least 83 in the finite mathematics class is very close to zero.
To learn more about standard error of the mean (SEM) click here:
brainly.com/question/32387882
#SPJ11
From information on a previous question: The mean systolic
blood pressure for a population of patients (µ) from a local clinic
is 130 with a standard deviation (σ) of 18.
What is the probability that a patient chosen at random will have a systolic blood pressure between 109 and 152? Rounded to the nearest ten thousandth (4 places to the right of the decimal).
Group of answer choices
0.8399
0.7678
0.0915
0.2864
0.7310
The probability that a patient chosen at random will have a systolic blood pressure between 109 and 152 is rounded to four decimal places, the probability is 0.7678.
To calculate the probability that a patient chosen at random will have a systolic blood pressure between 109 and 152, we need to standardize the values using z-scores and then use the standard normal distribution.
The z-score formula is:
z = (x - µ) / σ
where x is the value of interest, µ is the mean, and σ is the standard deviation.
For the lower value, 109:
z1 = (109 - 130) / 18 = -1.1667
For the upper value, 152:
z2 = (152 - 130) / 18 = 1.2222
Now we can find the probabilities associated with these z-scores using a standard normal distribution table or calculator.
P(z1 < Z < z2) = P(-1.1667 < Z < 1.2222)
Using a standard normal distribution table or calculator, we can find the respective probabilities:
P(Z < -1.1667) = 0.1210
P(Z < 1.2222) = 0.8888
Subtracting the lower probability from the higher probability, we get:
P(-1.1667 < Z < 1.2222) = 0.8888 - 0.1210 = 0.7678
Rounded to four decimal places, the probability is 0.7678.
Therefore, the correct answer is 0.7678.
Learn more about standard normal distribution here:
https://brainly.com/question/25279731
#SPJ11
Quiz Two 1. Let p represent a true statement, and q and r represent false atements. Find the truth value of the compound statement (~ p^~ q) v (~r^q). 2. Construct a truth table for the compound state
1. The compound statement (~p ^ ~q) v (~r ^ q) is false, 2. In the truth table, we evaluate the compound statement p v q by taking the OR (v) of the truth values of p and q.
1. Let's evaluate the truth value of the compound statement (~p ^ ~q) v (~r ^ q) using the given truth values.
Given:
p = true
q = false
r = false
Using the truth values, we can substitute them into the compound statement and evaluate each part:
(~p ^ ~q) v (~r ^ q) = (false ^ true) v (true ^ false)
Negating p and q, we have:
(~p ^ ~q) v (~r ^ q) = (false ^ true) v (true ^ false)
= false v false
= false
Therefore, the compound statement (~p ^ ~q) v (~r ^ q) is false.
2. To construct a truth table for a compound statement, we need to list all possible combinations of truth values for the individual statements and evaluate the compound statement for each combination.
Let's assume we have two statements, p and q.
p q p ^ q
T T T
T F F
F T F
F F F
Now, let's construct a truth table for the compound statement p v q:
p q p ^ q p v q
T T T T
T F F T
F T F T
F F F F
In the truth table, we evaluate the compound statement p v q by taking the OR (v) of the truth values of p and q.
Note: Since you didn't provide a specific compound statement for the second question, I assumed it to be p v q. If you have a different compound statement, please provide it, and I'll construct a truth table accordingly.
Learn more about compound statement here:
https://brainly.com/question/28794655
#SPJ11
A 5
has a cyclic subgroup of order 6 .
Yes, a group of order 5 has a cyclic subgroup of order 6.
In group theory, a cyclic subgroup is a subgroup generated by a single element, which is called a generator. The order of a subgroup is the number of elements it contains.
In this case, we are considering a group of order 5. The order of a group refers to the number of elements it has. So, we have a group with 5 elements.
According to a theorem in group theory, known as Lagrange's theorem, the order of any subgroup must divide the order of the group. In other words, if a group has order n and a subgroup has order m, then m must divide n.
In our case, we have a group of order 5. The only divisors of 5 are 1 and 5. Therefore, any subgroup of this group must have an order that is either 1 or 5.
However, the statement claims that there exists a cyclic subgroup of order 6. This is not possible since 6 is not a divisor of 5. Hence, the main answer provided initially is incorrect.
Learn more about cyclic
brainly.com/question/30079055
#SPJ11
Lewis Hamilton has podiums (Top 3) in 62% in his Formula 1 career. How likely is it that Lewis will be successful in finishing on the podium in 10 of 25 races next season?
7.86%
15.78%
1.36%
4.18%
The probability that Lewis will be successful in finishing on the podium in 10 of 25 races next season is 4.18%. Hence, the correct option is 4.18%.
We are given that;
Lewis Hamilton has podiums in 62% of his Formula 1 career.
We are to find how likely it is that Lewis will be successful in finishing on the podium in 10 of 25 races next season.
To find out the likelihood, we will use the Binomial probability formula. The binomial probability formula is given as:
$$P(x) = \binom{n}{x} p^x (1-p)^{n-x}$$
Where x is the number of successful outcomes, p is the probability of success on a single trial, n is the number of trials. P(x) represents the probability of obtaining x successes out of n trials.
Here, x = 10, n = 25, p = 62% = 0.62, q = 1 - p = 0.38.
$$P(x) = \binom{25}{10} (0.62)^{10}(0.38)^{15}$$
On simplifying the above expression, we get;
$$P(x) = 0.0418$$
Therefore, the probability that Lewis will be successful in finishing on the podium in 10 of 25 races next season is 4.18%. Hence, the correct option is 4.18%.
To know more about Probability i.e. likelihood, refer here ;
https://brainly.com/question/29006544
#SPJ11
Given representations rho:G→GL(V) and η:G→GL(W), show that the characters of their direct sum and tensor product satisfy χ rho⊕η
(s)=χ rho
(s)+χ η
(s) and χ rho⊗η
(s)=χ rho
(s)χ η
(s).
The characters of the direct sum and tensor product of representations ρ and η satisfy the properties χρ⊕η(s) = χρ(s) + χη(s) and χρ⊗η(s) = χρ(s)χη(s), respectively.
Let ρ: G → GL(V) and η: G → GL(W) be representations of a group G on vector spaces V and W, respectively. We denote their characters as χρ(g) and χη(g) for g ∈ G.
Direct Sum:
The direct sum representation of ρ and η is denoted as ρ ⊕ η and is defined on the vector space V ⊕ W as follows:
(ρ ⊕ η)(g)(v, w) = (ρ(g)v, η(g)w) for all g ∈ G and (v, w) ∈ V ⊕ W.
The character of the direct sum representation is χρ⊕η(g) = tr((ρ ⊕ η)(g)).
Now, consider an arbitrary group element s ∈ G.
To show χρ⊕η(s) = χρ(s) + χη(s), we need to demonstrate that the characters are equal.
Using the definition of the direct sum representation, we have:
(ρ ⊕ η)(s)(v, w) = (ρ(s)v, η(s)w) for all (v, w) ∈ V ⊕ W.
Taking the trace of this linear map, we get:
tr((ρ ⊕ η)(s)) = tr(ρ(s) ⊕ η(s))
= tr(ρ(s)) + tr(η(s)) (since trace is additive)
Therefore, χρ⊕η(s) = tr((ρ ⊕ η)(s)) = tr(ρ(s)) + tr(η(s)) = χρ(s) + χη(s).
Hence, the characters of the direct sum satisfy the given property.
Tensor Product:
The tensor product representation of ρ and η is denoted as ρ ⊗ η and is defined on the tensor product space V ⊗ W as follows:
(ρ ⊗ η)(g)(v ⊗ w) = ρ(g)v ⊗ η(g)w for all g ∈ G, v ∈ V, and w ∈ W.
The character of the tensor product representation is χρ⊗η(g) = tr((ρ ⊗ η)(g)).
Again, consider an arbitrary group element s ∈ G.
To show χρ⊗η(s) = χρ(s)χη(s), we need to demonstrate that the characters are equal.
Using the definition of the tensor product representation, we have:
(ρ ⊗ η)(s)(v ⊗ w) = ρ(s)v ⊗ η(s)w for all v ∈ V and w ∈ W.
Taking the trace of this linear map, we get:
tr((ρ ⊗ η)(s)) = tr(ρ(s) ⊗ η(s))
= tr(ρ(s)) tr(η(s)) (since trace is multiplicative)
Therefore, χρ⊗η(s) = tr((ρ ⊗ η)(s)) = tr(ρ(s)) tr(η(s)) = χρ(s)χη(s).
Hence, the characters of the tensor product satisfy the given property.
Thus, we have shown that the characters of the direct sum and tensor product of representations ρ and η satisfy the properties χρ⊕η(s) = χρ(s) + χη(s) and χρ⊗η(s) = χρ(s)χη(s), respectively.
Learn about direct sum and tensor product here : https://brainly.com/question/32498804
#SPJ11
An educational psychologist wishes to know the mean number of words a third grader can read per minute. 5 he wants to ensure that the estimate has an error of at most 0.2 words per minute. A previous study found that the mean was 24 words per minute. Assuming that the standard deviation is 5.4. What is the minimum number of third groders that must be included in a sample to construct the 98 कf confidence interval Round your answer up to the next integer.
The minimum number of third graders that must be included in a sample to construct a 98% confidence interval with an error of at most 0.2 words per minute can be determined using the formula:
n = (Z * σ / E)^2
Where:
n = required sample size
Z = Z-score corresponding to the desired confidence level (in this case, 98% confidence level)
σ = standard deviation of the population
E = maximum allowable error
In this case, the Z-score for a 98% confidence level can be found using a standard normal distribution table or a statistical calculator. The Z-score for a 98% confidence level is approximately 2.33.
Plugging in the given values:
σ = 5.4 (standard deviation)
E = 0.2 (maximum allowable error)
Z = 2.33 (Z-score for 98% confidence level)
n = (2.33 * 5.4 / 0.2)^2
n = 128.4881
Since the sample size must be a whole number, we round up to the next integer:
n = 129
Therefore, the minimum number of third graders that must be included in a sample to construct a 98% confidence interval with an error of at most 0.2 words per minute is 129.
To estimate the mean number of words a third grader can read per minute with an error of at most 0.2 words per minute and a 98% confidence level, a sample size of 129 third graders should be included in the study.
To know more about sample, visit
https://brainly.com/question/24466382
#SPJ11
Suppose on an average month you sell 1200 specialty donuts at $2.50 each. For every $0.10 increase in your price you sell 40 less specialty donuts. Explain how you would use operations on functions to determine the optimal asking price. (calculating the optimal asking price is not necessary)
To determine optimal asking price for specialty donuts, firm analyzed price elasticity of demand. They found that for every $0.10 increase in price, 40 fewer donuts were sold. the price elasticity coefficient of -0.83, which is less than 1, firm concluded that they could increase price. So, optimal asking price was determined to be $2.59 per donut.
The "Selling-Price" of donuts is : $2.59 each
The Monthly-Sales is : 1200, Change in price is : $0.10
The Change in sales is : -40,
The firm can determine the "asking-price" by analyzing the "price-elasticity" of demand.
The "Price-Elasticity" of demand can be calculated as :
= [(Final quantity demanded) - (initial Quantity demanded)/(initial quantity demanded)] / [(Final price - initial price) / initial price],
= [(1160 - 1200)/1200] / [($2.60 - $2.50)/$2.50]
= -0.033/0.04
= -0.83
Here, coefficient of price elasticity is less than 1 due to which a firm can increase price according to the requirements.
Learn more about Price Elasticity here
https://brainly.com/question/30161342
#SPJ4
When converted to an iterated integral, the following double integral is easier to evaluate in one order than the other. Find the best order and evaluate the integral. ∬R2xsec2(xy)dA;R={(x,y);0≤x≤3π,0≤y≤1} A. It is easier to integrate with respect to y first. The value of the double integral is (Type an exact answer.) B. It is easier to integrate with respect to x first. The value of the double integral is (Tvpe an exact answer)
The value of the double integral is 2ln(2).
Given-double integral is ∬R2xsec_2(xy)dA ; R = {(x,y);0≤x≤3π,0≤y≤1}.
The best order and evaluate the integral, we can first write the double integral as iterated integral.
∬R2xsec_2(xy)dA = ∫03π∫012xsec_2(xy)dydx
Therefore, the best order to evaluate the integral is integrating with respect to y first.
Now we can integrate over y from 0 to 1.
Therefore,
∫012xsec2(xy)dy=2tan(xy)∣01=2tan(x0)−2tan(x)=−2tan(x)
Now the integral becomes∫03π−2tan(x)dx
Now integrate with respect to x.
-2 ∫03π tan(x)dx=2ln(∣cos(x)∣)∣03π=2ln(2)
Therefore, the value of the double integral is 2ln(2).
It is easier to integrate with respect to y first. The value of the double integral is 2ln(2).
Learn more about Integral from the given link:
https://brainly.com/question/27360126
#SPJ11
Trigonometric Equations Score: 0.25/6 0/6 answered Question 1 Suppose sin 2x x= = commas) Find all solutions 0≤x≤ 2. Give exact values in radians, and type "pi" for . √2 2 >
The given trigonometric equation is sin(2x) = √2/2. The task is to find all solutions for x within the interval 0 ≤ x ≤ 2, and express the solutions in exact values in radians, using "pi" for π. the exact values in radians for the solutions of the equation sin(2x) = √2/2 within the interval 0 ≤ x ≤ 2 are x = π/8 and x = 3π/8.
To solve the equation sin(2x) = √2/2, we need to find the values of x that satisfy this equation within the given interval. First, we identify the reference angle whose sine value is √2/2. The reference angle for this value is π/4 radians or 45 degrees. Next, we use the periodicity of the sine function to find the general solutions. Since sin(θ) = sin(π - θ), we have sin(2x) = sin(π/4).
This leads to two possibilities:
1) 2x = π/4, which gives x = π/8.
2) 2x = π - π/4, which simplifies to 2x = 3π/4, and x = 3π/8. However, we need to consider the given interval 0 ≤ x ≤ 2. The solutions x = π/8 and x = 3π/8 both lie within this interval.
Learn more about trigonometric here:
https://brainly.com/question/29156330
#SPJ11
Suppose that in setting up RSA, Alice chooses p=31,q=47 and e=13 (a) What is Alice's public key? (b) What is Alice's private key? (c) Suppose Alice wishes to send Bob the message M=100. Bob's public key is (11,493) and Bob's private key is (163,493). What is the cipher text corresponding to M ? Show your work. (Not all of the information given with this question is needed to compute the correct answer.)
The cipher text corresponding to M = 100 is 170
To set up RSA, we need to follow several steps:
(a) Alice's public key:
Alice chooses two prime numbers, p = 31 and q = 47. The product of these primes, n = p * q, becomes part of the public key. So, n = 31 * 47 = 1457. Alice also selects a public exponent, e = 13. Hence, Alice's public key is (e, n) = (13, 1457).
(b) Alice's private key:
To find Alice's private key, we need to compute the modular multiplicative inverse of e modulo φ(n). φ(n) is Euler's totient function, which calculates the count of positive integers less than n and coprime to n. In this case, φ(n) = φ(31) * φ(47) = (31 - 1) * (47 - 1) = 1380.
Using the Extended Euclidean Algorithm or another method, we find d = e^(-1) mod φ(n). In this case, d = 997 is the modular multiplicative inverse of 13 modulo 1380. Hence, Alice's private key is (d, n) = (997, 1457).
(c) Cipher text corresponding to M:
To encrypt the message M = 100 using RSA, we use Bob's public key (e, n) = (11, 493). The encryption process involves raising M to the power of e and taking the remainder modulo n.
Cipher text = C = M^e mod n = 100^11 mod 493.
To compute C, we can use modular exponentiation algorithms, such as repeated squaring or the binary method. The final result is C = 170.
Therefore, the cipher text corresponding to M = 100 is 170.
Learn more about cipher text from given link
https://brainly.com/question/9380417
#SPJ11
1. Prove the Distribution Law using any of the three methods discussed in class. \[ A \cap(B \cup C)=(A \cap B) \cup(A \cap C) \] 2. Write the dual of the Distribution Law from (1) and prove it using
1. The Distribution Law states that \[ A \cap (B \cup C) = (A \cap B) \cup (A \cap C) \]. This can be proven using any of the three methods discussed in class: set-theoretic proof, truth table, or logical equivalences.
2. The dual of the Distribution Law is \[ A \cup (B \cap C) = (A \cup B) \cap (A \cup C) \]. We can prove this using the same method used in (1), either a set-theoretic proof, truth table, or logical equivalences.
1. To prove the Distribution Law \[ A \cap (B \cup C) = (A \cap B) \cup (A \cap C) \], we can use one of the following methods:
- Set-Theoretic Proof: We start by considering an arbitrary element x. We show that if x belongs to the left side of the equation, then it also belongs to the right side, and vice versa. By proving inclusion in both directions, we establish that the two sets are equal.
- Truth Table: We construct a truth table with columns representing the logical values of A, B, C, and the expressions on both sides of the equation. By showing that the values of these expressions are the same for all possible combinations of truth values, we demonstrate the equality of the two sides.
- Logical Equivalences: Using known logical equivalences and properties, we manipulate the expressions on both sides of the equation to demonstrate their equivalence step by step.
2. The dual of the Distribution Law is \[ A \cup (B \cap C) = (A \cup B) \cap (A \cup C) \]. We can prove this dual law using the same method used in (1) - either a set-theoretic proof, truth table, or logical equivalences. The process involves considering an arbitrary element and proving the equality of the two sides through inclusion in both directions.
By following one of these methods, we can establish the validity of both the Distribution Law and its dual.
Learn more about logical equivalences: brainly.com/question/32776324
#SPJ11
Use the method of undetermined coefficients to find the general solution to the given non-homogeneous equation:
y ′′′
−6y ′′
+11y ′
−6y=e x
--would really appreciate help with my differential eqn hw so i can study! detailed answers is greatly appreciated. thank you
The general solution to the given non-homogeneous equation is y = c1 e^x + c2 e^2x + c3 e^3x + e^x.
The given differential equation:
y ′′′ − 6y ′′ + 11y ′ − 6y = e^x
The characteristic equation for y″′ − 6y″ + 11y′ − 6y = 0 is:
r^3 - 6r^2 + 11r - 6 = 0.
Factoring the characteristic equation:
(r - 1)(r - 2)(r - 3) = 0.
So, r1 = 1, r2 = 2, and r3 = 3.
The homogeneous solution for the given differential equation:
yH = c1 e^x + c2 e^2x + c3 e^3x ….(1)
where c1, c2, and c3 are arbitrary constants.
A particular solution to the non-homogeneous equation:
yP = Ae^x ….(2)
where A is a constant.
To find the value of the constant A, substitute equation (2) into the given differential equation and solve for A.
Now, yP' = Ae^x,
yP'' = Ae^x, and yP''' = Ae^x.
Substituting these into the given differential equation:
y ′′′ − 6y ′′ + 11y ′ − 6y = yP''′ − 6yP'' + 11yP' − 6yP
= Ae^x - 6Ae^x + 11Ae^x - 6Ae^x
= e^x
= A e^x
Therefore, A = 1.
Solution:
y = yH + yP ….(3)
Substituting equation (1) and (2) into equation (3),
y = c1 e^x + c2 e^2x + c3 e^3x + e^x.
To know more about equation visit:
https://brainly.com/question/29657983
#SPJ11
