(a) what is the characteristic time constant of a 23.2 mh inductor that has a resistance of 4.21 ω? ms (b) if it is connected to a 12.0 v battery, what is the current after 12.5 ms? a

Answers

Answer 1

The current through the circuit after 12.5 ms is 2.5864 A.

The characteristic time constant of a 23.2 mh inductor that has a resistance of 4.21 ω is 5.82115 ms.

If it is connected to a 12.0 v battery, the current after 12.5 ms will be 2.5864 A.

Below are the steps to get to the answer:(a) Calculate the characteristic time constant of the circuit using the formula:τ = L/RWhere τ is the time constant, L is the inductance of the inductor, and R is the resistance of the circuit.tau=23.2mH/4.21Ω=5.82115ms

Hence, the characteristic time constant of the circuit is 5.82115 ms.

(b) To calculate the current through the circuit, we need to use the formula:i = (V/R) [1 - e(-t/τ)]Where i is the current, V is the voltage of the battery, R is the resistance of the circuit, t is the time, and τ is the characteristic time constant of the circuit.i = (12/4.21) [1 - e(-12.5/5.82115)]i = 2.5864

Hence, the current through the circuit after 12.5 ms is 2.5864 A.

Learn more about circuit

brainly.com/question/12608516

#SPJ11


Related Questions

an piece of space debris is released from rest at an altitude that is two earth radii from the center of the earth. compared to its weight on earth, the weight of this debris is? A) one-quarter of its weight on the surface of the earth. B) one-half of its weight on the surface of the earth. C) zero. D) the same as on the surface of the earth. E) one-third of its weight on the surface of the earth.

Answers

An piece of space debris is released from rest at an altitude that is two earth radii from the center of the earth. the weight of this debris is zero, which is option C.

The correct option is C. Zero

Weight of this debris is?

The weight of this debris is zero (option C).Explanation: Weight of an object is a force that is caused by the gravitational attraction of the earth for the object. The weight is directly proportional to the mass of the object.

The formula to calculate weight is given as follows: Weight = Mass x Gravitational field strength. The gravitational field strength is the same everywhere on the earth. Its value is approximately 9.8 N/kg. So the weight of an object depends on its mass and the distance from the center of the earth.  This altitude is called the state of weightlessness. At this point, the gravitational force and the centrifugal force acting on the object are equal in magnitude, but opposite in direction. Thus, the weight of this debris is zero, which is option C.

To know more about gravitational field strength visit

https://brainly.com/question/14080810

#SPJ11

An electron situated at point P experiences an electrostatic force of 4.8 x 10-14 N acting on it. What is the electric field strength at P? 3.0 x 10^5 N/C 7.7 x 10^-33 N/C 3.3 x 10^-6 N/C 6.4 x 10^-14

Answers

Based on the information provided in the question, we cannot determine the electric field strength at point P.

The electric field strength at point P can be calculated using the formula:

Electric Field Strength = Force / Charge

In this case, the given force acting on the electron is 4.8 x 10^-14 N. However, the charge of the electron is not provided in the question. Without knowing the charge, we cannot accurately calculate the electric field strength.

The electric field strength is defined as the force experienced by a unit positive charge. Since the charge of the electron is negative, we would need to consider the magnitude of the charge to calculate the electric field strength correctly.

Therefore, based on the information provided in the question, we cannot determine the electric field strength at point P.

To know more about electric refer here:

https://brainly.com/question/31173598#

#SPJ11

Consider the given levels with the given sample sizes.
a) Find the value of tn–1,α/2 needed to construct a 90% confidence interval with the sample size 9.
b) Find the value of tn–1,α/2 needed to construct a 95% confidence interval with the sample size 5.
c) Find the value of tn–1,α/2 needed to construct a 99% confidence interval with the sample size 29.
d) Find the value of tn–1,α/2 needed to construct a 95% confidence interval with the sample size 2

Answers

To find the value of tn–1,α/2 (t-distribution critical value) needed to construct a confidence interval, we need to know the sample size (n) and the desired confidence level (1 - α). The correct answers are a)1.833, b)2.776, c)2.763, and d) undefined.

The t-distribution critical value depends on both the sample size and the desired confidence level. Here are the solutions to the given questions:

a) For a 90% confidence interval, the desired confidence level is 1 - α = 0.90.

The sample size is n = 9.

Using a t-distribution table or a statistical calculator, the value of tn–1,α/2 for a 90% confidence interval with 9 degrees of freedom is approximately 1.833.

b) For a 95% confidence interval, the desired confidence level is 1 - α = 0.95.

The sample size is n = 5.

Using a t-distribution table or a statistical calculator, the value of tn–1,α/2 for a 95% confidence interval with 4 degrees of freedom is approximately 2.776.

c) For a 99% confidence interval, the desired confidence level is 1 - α = 0.99.

The sample size is n = 29.

Using a t-distribution table or a statistical calculator, the value of tn–1,α/2 for a 99% confidence interval with 28 degrees of freedom is approximately 2.763.

d) For a 95% confidence interval, the desired confidence level is 1 - α = 0.95.

The sample size is n = 2.

Using a t-distribution table or a statistical calculator, the value of tn–1,α/2 for a 95% confidence interval with 1 degree of freedom is undefined. This is because the t-distribution with 1 degree of freedom does not have a symmetric distribution, and the concept of a confidence interval is not applicable in this case.

Therefore, the correct answers are a)1.833, b)2.776, c)2.763, and d) undefined.

For more details regarding confidence interval, visit:

https://brainly.com/question/32546207

#SPJ4

Hi! I got a physics final coming up and am allowed to have a formula sheet (2 sides) on everything on the test. I would appreciate it if someone could write this out for me (100 points and potential brainliest) the topics are for Physics 1 and are as follows:


2D kinematics
Block on an Inclined Plane
Gravity and Orbital Motion
Torque and Rotational Energy
Doppler Effect and Snells Law
Lenses and mirrors
Electric Fields
Resistors and Parallel Circuits


thanks in advance!

Answers

2D Kinematics deals with the motion of objects in two dimensions, typically represented by the x and y axes. It involves analyzing the position, velocity, and acceleration of objects as they move in a plane.

How to explain the information

Gravity is the force of attraction between two objects with mass Orbital motion occurs when an object, such as a planet or a satellite, moves around another object under the influence of gravity.

Torque is a measure of the rotational force applied to an object. It depends on the force applied and the lever arm, which is the perpendicular distance from the axis of rotation to the point of application of the force. Rotational energy refers to the energy associated with an object's rotation. It depends on the moment of inertia and angular velocity of the object.

The Doppler Effect describes the change in frequency or wavelength of a wave as observed by an observer moving relative to the source of the wave. It explains phenomena such as the change in pitch of a siren as a vehicle approaches and then moves away from an observer. Snell's Law describes the behavior of light as it passes through the interface between two different media. It relates the angle of incidence and the angle of refraction of light rays at the boundary, taking into account the refractive indices of the media.

Lenses and mirrors are optical devices that manipulate the path of light. Lenses are transparent objects with curved surfaces that can converge or diverge light rays, leading to the formation of real or virtual images. Mirrors, on the other hand, reflect light and can create images through reflection.

An electric field is a region around an electrically charged object where a force is exerted on other charged objects. It is a vector field, meaning it has both magnitude and direction.

Resistors are components in electrical circuits that impede the flow of electric current. They are designed to have a specific resistance value and can be used to control the amount of current in a circuit.

Learn more about kinematics on

https://brainly.com/question/26407594

#SPJ1

how can light beused like a fingerprint to identify elements

Answers

Light can be used like a fingerprint to identify elements through the process of spectroscopy. Overall, the ability to use light like a fingerprint to identify elements is a powerful tool that has numerous applications in many different fields of science and technology.

Spectroscopy is the study of the interaction between matter and electromagnetic radiation. This is possible because each element has a unique atomic structure that results in a distinct pattern of energy levels. When light is absorbed or emitted by an atom, it causes a change in the energy level of the electrons within the atom. This change in energy results in a characteristic pattern of wavelengths of light that is specific to the element in question.This pattern is often referred to as the element's "spectral fingerprint." By analyzing the spectrum of an unknown sample of light and comparing it to the spectra of known elements, scientists can identify the elements that are present in the sample. This process of identifying elements using their spectral fingerprints is known as spectroscopic analysis.

Spectroscopy is a technique that scientists use to study the interaction between matter and electromagnetic radiation, including light. Each element has a unique atomic structure that results in a distinct pattern of energy levels. When light is absorbed or emitted by an atom, it causes a change in the energy level of the electrons within the atom. This change in energy results in a characteristic pattern of wavelengths of light that is specific to the element in question.This pattern is often referred to as the element's "spectral fingerprint." By analyzing the spectrum of an unknown sample of light and comparing it to the spectra of known elements, scientists can identify the elements that are present in the sample. This process of identifying elements using their spectral fingerprints is known as spectroscopic analysis.Spectroscopy has a wide range of applications in science and technology. For example, it is used to identify the composition of stars and other celestial bodies, to study the behavior of molecules and chemical reactions, and to analyze the properties of materials such as metals and semiconductors. Spectroscopy is also used in medical applications, such as diagnosing diseases and monitoring the progress of treatments.

To know more about spectroscopy visit :-

https://brainly.com/question/13265448

#SPJ11

in order to prepare a 1:5000 (w/v) solution from 20 cc of a 1:200 (w/v) solution, the pharmacist should add how many milliliters of diluent?

Answers

The pharmacist should add 0.002 mL of diluent.

How many milliliters of diluent should be added to prepare a 1:5000 (w/v) solution from 20 cc of a 1:200 (w/v) solution?

To prepare a 1:5000 (w/v) solution from 20 cc (cubic centimeters) of a 1:200 (w/v) solution, the pharmacist needs to add diluent.

First, let's determine the concentration of the 1:200 (w/v) solution. In a 1:200 (w/v) solution, the weight of the solute is 1 part and the volume is 200 parts.

So, the concentration can be calculated as (1/200) x 100 = 0.5% (w/v).

Now, we can set up a proportion to find the volume of the diluent needed:

(0.5% concentration) / (1:5000 dilution) = (x mL diluent) / (20 mL initial solution)

Simplifying the proportion, we get:

(0.5/5000) = (x/20)

Cross-multiplying and solving for x:

0.5 * 20 = 5000 * x

10 = 5000x

x = 10/5000

x = 0.002 mL

Therefore, the pharmacist should add 0.002 mL of diluent to prepare the 1:5000 (w/v) solution.

Learn  more about pharmacist

brainly.com/question/31593476

#SPJ11

(1/8) zxt. The dimensions of the variables v, x, and t are [LI[T], [L], and [T], respectively. The numerical factor 8 is dimensionless. What must be the dimensions of the variable z, such that both sides of the equation have the same dimensions? Use the following as necessary: [L]. [T]. 9 OAL(T2) B. 1/(T^2) OC. T/(L^2) OD. T/(L^3)

Answers

The correct option is B: 1/(T^2). The dimensions of the variable z in order to satisfy the equation are 1/(T^2)

To determine the dimensions of the variable z in the equation (1/8) zxt, we need to ensure that both sides of the equation have the same dimensions. Let's analyze the dimensions of each term in the equation:

On the left side, we have the numerical factor 1/8, which is dimensionless.

On the right side, we have z multiplied by x and t. The dimensions of x are [L] and the dimensions of t are [T]. Therefore, the product of x and t has dimensions of [L][T].

To balance the dimensions, the variable z must have dimensions that cancel out the dimensions of [L][T] on the right side. This means that the dimensions of z must be the reciprocal of [L][T].

Among the given options, the only one that matches the required dimensions is option B: 1/(T^2).

Therefore, the dimensions of the variable z in order to satisfy the equation are 1/(T^2).

To know more about dimensions, visit

https://brainly.com/question/29755536

#SPJ11

find two linearly independent vectors perpendicular to the vector v→=[2−1−9].

Answers

The two linearly independent vectors perpendicular to the vector v→=[2−1−9] are u = [9 18 -1] and w = [9 -18 2].

To find two linearly independent vectors perpendicular to the vector v→=[2−1−9], we need to use the dot product.The vector a is perpendicular to b if a · b = 0.Two vectors are linearly independent if neither vector is a multiple of the other.

Let's find two linearly independent vectors perpendicular to the given vector. Let's denote these vectors as u and w respectively.u = [a b c]u · v→ = a(2) + b(-1) + c(-9) = 0, u = [9 18 -1]w = [x y z]w · v→ = x(2) + y(-1) + z(-9) = 0, w = [9 -18 2]Both u and w are perpendicular to v→ since their dot products are 0.

To show that they are linearly independent, let's take the linear combination:cu + dw = 0 (where c and d are scalars)Solving the system of linear equations, we get:9c + 9d = 018c - 18d = 0-c + 2d = 0d = 1/2, c = -1/2So u and w are not multiples of each other.

Thus, they are linearly independent. Therefore, the two linearly independent vectors perpendicular to the vector v→=[2−1−9] are u = [9 18 -1] and w = [9 -18 2].

To know more about independent vectors visit :

https://brainly.com/question/31969348

#SPJ11

what happens to a sound wave when it interferes with another sound wave having the same frequency but traveling in the opposite direction? a. a standing wave is generated. b. beats are produced.

Answers

A sound wave when it interferes with another sound wave having the same frequency but traveling in the opposite direction produces beats.

The interference of two waves of the same frequency but travelling in opposite directions is called a standing wave. In simple terms, it is a wave pattern that is created by the superposition of two waves of equal frequency and amplitude traveling in opposite directions. The wave does not appear to move and looks as if it is stationary. However, beats are produced when two sound waves of the same frequency interfere with each other while travelling in opposite directions. A beat is a phenomenon that occurs when two sound waves interfere with each other. It is the result of the difference in the frequencies of the two waves.

When two sound waves of the same frequency interfere with each other while travelling in opposite directions, they produce beats, but when two waves of the same frequency and amplitude meet each other travelling in opposite directions, a standing wave is produced.

To know more about sound wave, visit:

https://brainly.com/question/31851162

#SPJ11

suppose the particle is shot toward the right from x = 1.0 m with a speed of 18 m/s . where is the particle's turning point?

Answers

The particle's turning point is located at approximately 16.53 meters above the reference point. we need to analyze its motion and find the position where its velocity changes direction.

To determine the particle's turning point, we need to analyze its motion and find the position where its velocity changes direction.

Assuming the positive x-direction is to the right, the particle is shot toward the right from x = 1.0 m with a speed of 18 m/s.

Let's consider the particle's motion along the x-axis. Since there are no external forces acting on the particle, we can use the principle of conservation of mechanical energy to analyze its motion.

At the particle's turning point, its kinetic energy will be zero, and all its initial kinetic energy will be converted into potential energy.

Initially, the particle has only kinetic energy. The kinetic energy (K) can be calculated using the formula:

K = (1/2) * m * v^2

where m is the mass of the particle and v is its velocity.

Since the mass is not provided, we can assume it cancels out when comparing the kinetic and potential energies.

At the turning point, all of the kinetic energy is converted into potential energy. The potential energy (U) can be calculated using the formula:

U = m * g * h

where g is the acceleration due to gravity and h is the height above the reference point.

Since the potential energy is zero at the reference point, we can set the potential energy equal to the initial kinetic energy and solve for the height (h).

(1/2) * m * v^2 = m * g * h

Canceling out the mass:

(1/2) * v^2 = g * h

Solving for h:

h = (1/2) * v^2 / g

Substituting the given values:

h = (1/2) * (18 m/s)^2 / 9.8 m/s^2

h ≈ 16.53 m

Therefore, the particle's turning point is located at approximately 16.53 meters above the reference point.

To learn more about Velocity click here

https://brainly.com/question/24135686

#SPJ11

a capacitor charged to 1.5 v stores 2.0 mj of energy. if the capacitor is charged to 3.0 v, it will store

Answers

When the capacitor is charged to 3.0 V, it will store approximately 2.655 joules of energy.

To find the energy stored in a capacitor when it is charged to a different voltage, we can use the formula:

E = (1/2) * C * V^2

where E is the energy stored, C is the capacitance, and V is the voltage.

Given that the initial voltage is 1.5 V and the initial energy stored is 2.0 mJ (millijoules), we can substitute these values into the equation:

2.0 mJ = (1/2) * C * (1.5 V)^2

Simplifying the equation, we find:

2.0 × 10^(-3) J = (1/2) * C * (2.25)

Now, we can solve for the capacitance (C):

C = (2.0 × 10^(-3) J) / [(1/2) * (2.25) * (1.5 V)^2]

C ≈ 0.59 F

Now, we can calculate the energy stored when the capacitor is charged to 3.0 V:

E = (1/2) * (0.59 F) * (3.0 V)^2

E ≈ 2.655 J

Therefore, when the capacitor is charged to 3.0 V, it will store approximately 2.655 joules of energy.

To know more about capacitor, click here:

https://brainly.com/question/31039860

#SPJ11

A trough whose cross section is a semicircle of radius r = 2 m is filled with water. What is the force due to water pressure on one end of the trough? Use the acceleration due to gravity g = 9.8 m/s².
(Use decimal notation. Give your answer to the nearest whole number. Express your answer in kN (recall that
1 kN = 1000 N.))
F ≈ KN

Answers

A trough whose cross section is a semicircle of radius r = 2 m is filled with water. The force due to water pressure on one end of the trough is 15 kN. This is due to the weight of water at the deepest part of the trough pressing down on the end.

Water pressure depends on the depth of the water. At the deepest part of the trough, the depth is r, so the pressure there is ρgr where ρ is the density of water, g is the acceleration due to gravity, and r is the radius of the trough.

Since the cross-section of the trough is a semicircle, we need to find the area of the semicircle and then multiply by the pressure to get the force.

The area of the semicircle is (πr²)/2, so the force is:F = (πr²/2)ρgr = (π(2 m)²/2)(1000 kg/m³)(9.8 m/s²) = 15.4 kN (rounded to the nearest tenth)

Therefore, the force due to water pressure on one end of the trough is approximately 15 kN.

To know more about semicircle  visit :-

https://brainly.com/question/29140521

#SPJ11

the four general types of evaluation research include all of the following except:

Answers

The four general types of evaluation research include all of the following except experimental studies.

Evaluation research is a form of applied social research that evaluates the efficiency (effectiveness), efficacy, and value of social programs. It is often known as program evaluation, policy evaluation, or performance assessment, and it is often used in the context of government or non-profit organizations to determine if their programs are effective and if they are generating the intended outcomes. Types of evaluation researchEvaluation research can be divided into four main categories: Experimental Studies: In experimental research, participants are randomly assigned to a control group or an experimental group, and the outcomes of both groups are compared.

Quasi-Experimental Studies: In a quasi-experimental research, the participants are not randomly assigned to the control group or the experimental group. Observational Studies: In observational research, the researcher collects data without interfering in the research setting.Case Studies: Case studies are conducted to evaluate specific situations or cases to determine the outcome of a program or policy.

Experimentation, quasi-experimental research, observational studies, and case studies are the four general types of evaluation research. The types of evaluation research depend on the research questions, the availability of resources, the nature of the program or policy, and the stakeholders' interests.The correct answer is Experimental Studies.

To learn more about research visit;

https://brainly.com/question/24174276

#SPJ11

what is the wavelength (in nanometers) of light having a frequency of 8.6 × 1013 hz?

Answers

The wavelength of light with a frequency of 8.6 × 10¹³ Hz is approximately 3.49 × 10³ nanometers.

To calculate the wavelength of light, we can use the equation:

λ = c / f

Where:

λ is the wavelength of light

c is the speed of light (approximately 3.00 × 10⁸ m/s)

f is the frequency of light

First, we need to convert the frequency given in hertz (Hz) to cycles per second:

8.6 × 10¹³ Hz = 8.6 × 10¹³ cycles/s

Now, we can calculate the wavelength:

λ = (3.00 × 10⁸ m/s) / (8.6 × 10¹³ cycles/s)

λ = (3.00 × 10⁸ m/s) / (8.6 × 10¹³ s⁻¹)

λ ≈ 3.49 × 10⁻⁶ m

To convert the wavelength from meters to nanometers, we multiply by 10⁹:

λ ≈ 3.49 × 10⁻⁶ m × 10⁹ nm/m

λ ≈ 3.49 × 10³ nm

Learn more about wavelength here:

https://brainly.com/question/29213586

#SPJ11

The wavelength of light having a frequency of 8.6 × 10¹³ Hz is approximately 3.49 × 10⁻⁷ nm.

The formula relating the wavelength, frequency, and speed of light is given by:

c = λνWhere c is the speed of light, λ is the wavelength, and ν is the frequency.

Substituting the values given into the formula we have:

c = 3.00 × 10⁸ m/sν = 8.6 × 10¹³ Hzλ = ?

The wavelength of light having a frequency of 8.6 × 10¹³ Hz is approximately 3.49 × 10⁻⁷ nm.

Frequency is the number of wave cycles that pass a given point in a given amount of time. Frequency is measured in units of Hertz (Hz), which is defined as the number of wave cycles per second.

Wavelength is the distance between two corresponding points on adjacent waves, such as the distance between two peaks or two troughs. Wavelength is measured in meters (m), but it is often more convenient to measure it in nanometers (nm), which are one billionth of a meter (10⁻⁹ m).

The formula relating the wavelength, frequency, and speed of light is given by:

c = λν

where c is the speed of light, λ is the wavelength, and ν is the frequency.

Substituting the values given into the formula we have:c = 3.00 × 10⁸ m/sν = 8.6 × 10¹³ Hzλ = ?

Solving the formula for wavelength, we get:λ = c/ν

Substituting the values for c and ν we get:λ = (3.00 × 10⁸ m/s) / (8.6 × 10¹³ Hz) = 3.49 × 10⁻⁷ m

Since it is more convenient to measure wavelength in nanometers (nm), we can convert meters to nanometers using the following conversion factor:1 m = 1 × 10⁹ nm

Substituting this conversion factor we have:λ = (3.49 × 10⁻⁷ m) × (1 × 10⁹ nm/m) = 3.49 × 10² nm = 349 nm

Therefore, the wavelength of light having a frequency of 8.6 × 10¹³ Hz is approximately 3.49 × 10⁻⁷ nm.

Learn more about wavelength of light: https://brainly.com/question/20462619

#SPJ11

sunlight reflects from a concave piece of broken glass, converging to a point 15 cm from the glass.

Answers

When sunlight reflects from a concave piece of broken glass, it converges to a point 15 cm from the glass.

When a beam of sunlight strikes a piece of broken glass, it is divided into two parts and reflects in various directions. When the sunlight reflects off the concave surface of the glass, it converges to a point 15 cm from the glass. This happens because the concave surface curves inward, causing the light rays to refract inwards.

The point where the light rays converge is known as the focus of the mirror or the focal point. In this case, the focal length of the mirror is 15 cm. This phenomenon is used in many optical instruments such as telescopes and microscopes, which use concave mirrors to focus light and produce magnified images.

Learn more about focal point here:

https://brainly.com/question/32157159

#SPJ11

Four views of a horseshoe magnet and a current-carrying wire are shown in the drawing. The wire is perpendicular to the screen, and the current is directed out of the screen toward you. In which one or more of these situations does the magnetic force on the current point due north?.

Answers

Four views of a horseshoe magnet and a current-carrying wire are shown in the drawing. The wire is perpendicular to the screen, and the current is directed out of the screen towards you.

The magnetic force acting on a current-carrying wire is influenced by the direction of the current flow and the direction of the magnetic field, which is decided by the magnetic pole it is near. The magnetic field lines created by a bar magnet, for example, run from the north to the south pole.In the given figure, the magnetic field lines are moving from north to south, as shown by the white arrow.

When the direction of the current is perpendicular to the direction of the magnetic field, a magnetic force is exerted on the current-carrying wire. According to the right-hand rule, the magnetic force on the wire will be perpendicular to both the current-carrying wire and the direction of the magnetic field.

According to the right-hand rule, magnetic force will be directed north in the first view (A), and magnetic force will be directed east in the third view (C).

Therefore, magnetic force on the current points due north in the first view (A).Hence, the answer is the first view (A).

To learn more about horseshoe visit;

https://brainly.com/question/225550

#SPJ11

Using Planck's constant as h=6.63 E-34 J*s, what is the wavelength of a proton with a speed of 5.00 E6 m/s? The mass of the proton is 1.66 E-27 kg.

Answers

The wavelength of a proton with a speed of 5.00 × 10⁶ m/s is approximately 7.99 × 10⁻¹⁴ meters.

To calculate the wavelength of a proton with a given speed, we can use the de Broglie wavelength equation:

λ = h / (m * v)

Where:

λ is the wavelength

h is Planck's constant (6.63 × 10⁻³⁴ J·s)

m is the mass of the proton (1.66 × 10⁻²⁷ kg)

v is the speed of the proton (5.00 × 10⁶ m/s)

Plugging in the given values into the equation:

λ = (6.63 × 10⁻³⁴ J·s) / ((1.66 × 10⁻²⁷ kg) * (5.00 × 10⁶ m/s))

λ = (6.63 × 10⁻³⁴ J·s) / (8.3 × 10⁻²¹ kg·m/s)

Next, we can convert the numerator to units of kg·m/s to match the denominator:

λ = (6.63 × 10⁻³⁴ kg·m/s) / (8.3 × 10⁻²¹ kg·m/s)

λ ≈ 7.99 × 10⁻¹⁴ m

Learn more about wavelength here:

https://brainly.com/question/31944564

#SPJ11

The wavelength of a proton with a speed of 5.00 E6 m/s is 7.99 E-14 meters.

We can find the wavelength of a proton with a speed of 5.00 E6 m/s using Planck's constant as h=6.63 E-34 J*s and the mass of the proton as 1.66 E-27 kg.

The formula to calculate the wavelength of a proton with a speed of 5.00 E6 m/s is given by;

wavelength= (h/p), where h is Planck's constant, and p is the momentum of the proton.

We can find the momentum of the proton using the mass and speed of the proton. The formula to calculate momentum is given by;p = m * v, where m is the proton's mass, and v is the proton's velocity.

Given, Planck's constant h = 6.63 E-34 J*sThe mass of the proton is m = 1.66 E-27 kgSpeed of the proton = v = 5.00 E6 m/sThe momentum of the proton is given by;p = m * vp = 1.66 E-27 kg * 5.00 E6 m/s = 8.30 E-21 kg m/sWe can now use the momentum to find the wavelength of the proton using the formula;

wavelength = (h/p)

wavelength = (6.63 E-34 J*s) / (8.30 E-21 kg m/s)

wavelength = 7.99 E-14 meters

Learn more about the proton's velocity: https://brainly.com/question/28307049

#SPJ11

what is the maximum number of electrons that can occupy the third (n=3) shell?

Answers

The maximum number of electrons that can occupy the third (n=3) shell is 18.

The total number of electrons that can be accommodated in any given shell is equal to the sum of the possible angular momentum quantum numbers (l = 0,1,2,3,....(n-1)). The maximum number of electrons that can occupy the third (n=3) shell is 18.

Each electron in an atom is described by four different quantum numbers, and these quantum numbers include: Principal Quantum Number (n): It defines the shell number to which the electron belongs, and it indicates the distance of an electron from the nucleus. The maximum number of electrons that a shell can hold is given by 2n².

Azimuthal Quantum Number (l): It determines the subshell number to which the electron belongs, and it determines the orbital angular momentum of an electron.

Magnetic Quantum Number (m): It specifies the orientation of an orbital, and it specifies the number of orbitals present in a given subshell.

Spin Quantum Number (s): It determines the spin of the electron and its direction of rotation.

To know more about Quantum Number visit:

https://brainly.com/question/21760208

#SPJ11

Question 8 (13 pts.) In an experiment to determine the factors affecting tensile strength in steel plates, the tensile strength (in kg/mm²), the manganese content (in parts per thousand), and the thi

Answers

The factors affecting tensile strength in steel plates are manganese content and thickness of the plate. The higher the manganese content and thickness, the higher the tensile strength.

Tensile strength is the maximum stress that a material can withstand while being stretched or pulled before breaking or losing strength. In an experiment to determine the factors affecting tensile strength in steel plates, two factors were measured: the manganese content and the thickness of the plate.The results showed that the tensile strength increased with higher levels of manganese content and thickness. This means that the higher the manganese content and thickness of the plate, the higher the tensile strength. It is important to note that these two factors are not the only ones that affect tensile strength, but they are significant factors that should be considered when designing and manufacturing steel plates.

The maximum stress that a material can withstand before breaking when it is allowed to be stretched or pulled is known as tensile strength.

Know more about tensile strength, here:

https://brainly.com/question/31432953

#SPJ11

what is the highest order dark fringe, , that is found in the diffraction pattern for light that has a wavelength of 629 nm and is incident on a single slit that is 1480 nm wide?

Answers

The highest order dark fringe, n is approximately equal to 2 for light that has a wavelength of 629 nm and is incident on a single slit that is 1480 nm wide.

The highest order dark fringe, n can be determined using the equation:

n λ = a sin θ

where,λ = 629 nma = 1480 nm

Given data:

wavelength (λ) = 629 nmsingle slit width (a) = 1480 nm

The highest order dark fringe, n can be determined using the equation:n λ = a sin θThe first dark fringe corresponds to n = 1, second dark fringe corresponds to n = 2, and so on.

For the highest order dark fringe, we need to find the largest value of n which gives a valid value of

sin θ.n λ = a sin θ ⇒ sin θ = (n λ) / a

For the highest order dark fringe, sin θ = 1 which gives:

n λ = a sin θ⇒ n λ = a⇒ n = a / λ

We have,a = 1480 nmλ = 629 nm

Substituting the values in the equation, we get:

n = a / λ= 1480 nm / 629 nm= 2.35 or 2 (approx)Therefore, the highest order dark fringe, n is approximately equal to 2

The highest order dark fringe, n is approximately equal to 2 for light that has a wavelength of 629 nm and is incident on a single slit that is 1480 nm wide.

To know more about dark fringe, visit:

https://brainly.com/question/31576174

#SPJ11

each metal and its work function shown below is illuminated with 400 nm light. which one produces ejected electrons with maximum kinetic energy?

Answers

lithium produces ejected electrons with maximum kinetic energy because its work function is the smallest among the given metals.

The metal which produces ejected electrons with maximum kinetic energy when illuminated with 400 nm light is lithium. The work function of a metal is the minimum energy that is required to remove an electron from its surface.

The photoelectric effect is the emission of electrons from a material due to the absorption of energy from electromagnetic radiation.To determine the metal that produces ejected electrons with maximum kinetic energy, one should compare the work function of each metal with the energy of the incoming photons.

The difference between these two values is the amount of energy available to the ejected electrons in the form of kinetic energy. Hence, we can conclude that lithium produces ejected electrons with maximum kinetic energy because its work function is the smallest among the given metals. Lithium has a work function of 2.30 eV, which corresponds to a wavelength of 539 nm, whereas the incoming wavelength is 400 nm, which is shorter than the work function of lithium.

Lithium produces ejected electrons with maximum kinetic energy. The work function of a metal is the minimum energy that is required to remove an electron from its surface. The photoelectric effect is the emission of electrons from a material due to the absorption of energy from electromagnetic radiation. To determine the metal that produces ejected electrons with maximum kinetic energy, one should compare the work function of each metal with the energy of the incoming photons. The difference between these two values is the amount of energy available to the ejected electrons in the form of kinetic energy.

Hence, we can conclude that lithium produces ejected electrons with maximum kinetic energy because its work function is the smallest among the given metals.

To know more about kinetic energy visit:

brainly.com/question/999862

#SPJ11

a satellite is in a stable circular orbit about earth at an altitude equal to earth’s radius

Answers

The velocity of the satellite in a stable circular orbit about Earth at an altitude equal to Earth's radius is 7.91 × 103 m/s.

Given that a satellite is in a stable circular orbit about Earth at an altitude equal to Earth's radius. Here are some facts regarding this: At an altitude equal to Earth's radius, a satellite orbits Earth in a circular orbit. The period of the satellite's rotation is the same as the period of Earth's rotation, and the satellite is in a geostationary orbit.

The velocity of the satellite in a circular orbit can be calculated using the formula:

[tex]v = (GM/r)^0.5[/tex]

where G is the universal gravitational constant, M is the mass of the Earth, and r is the distance between the satellite and the center of the Earth.

Substituting[tex]r = 2rE[/tex] and ME = 5.98 × 1024 kg into the above formula, we obtain:

v = (6.67 × 10-11)(5.98 × 1024)/(2(6.38 × 106))^0.5

= 7.91 × 103 m/s

Therefore, the velocity of the satellite in a stable circular orbit about Earth at an altitude equal to Earth's radius is 7.91 × 103 m/s.

To learn more about velocity visit;

https://brainly.com/question/30559316

#SPJ11

A small generator draws 4 A of current on a 15 V power source. If the generator runs 50% of the time, with electricity costs of $2 per kWh, how much does it cost to run for a 25-day period? Leave your

Answers

The cost to run the small generator for a 25-day period, with a current draw of 4 A on a 15 V power source, running 50% of the time, and electricity costs of $2 per kWh, is $36.

To calculate the cost of running the generator for a 25-day period, we need to consider the power consumption and the duration of operation.

Current drawn by the generator = 4 A

Voltage of the power source = 15 V

Operation time = 50% (0.5) of the total time

Electricity cost = $2 per kWh

To find the energy consumed by the generator, we can use the formula:

Energy (in kWh) = (Power × Time) / 1000

First, we need to calculate the power consumed by the generator:

Power (in watts) = Voltage × Current

Power = 15 V × 4 A

Power= 60 W

Next, we need to calculate the energy consumed per hour:

Energy per hour (in kWh) = (Power × Time) / 1000

Energy per hour = (60 W × 1 hour) / 1000

Energy per hour = 0.06 kWh

Since the generator runs for 50% (0.5) of the time, we can calculate the energy consumed per day:

Energy per day (in kWh) = Energy per hour × 24 hours × 0.5

Energy per day = 0.06 kWh × 24 hours × 0.5

Energy per day = 0.72 kWh

Now, let's calculate the energy consumed over the 25-day period:

Total energy consumed (in kWh) = Energy per day × 25 days

Total energy consumed = 0.72 kWh/day × 25 days

= 18 kWh

Finally, we can calculate the cost of running the generator for the 25-day period:

Cost = Total energy consumed × Electricity cost per kWh

Cost = 18 kWh × $2/kWh

Cost  = $36

The cost to run the small generator for a 25-day period, with a current draw of 4 A on a 15 V power source, running 50% of the time, and electricity costs of $2 per kWh, is $36.

To know more about generator  visit:

https://brainly.com/question/12475693

#SPJ11

Q13 A car of a roller coaster has a total mass of 10000 kg including the passenger. At position A (the top of the first incline), it cruises at 4m/s. a) Calculate its velocity at position C at the top

Answers

The velocity of a car at position C of the roller coaster is 2 m/s.

In order to calculate the velocity of the car at position C of the roller coaster, we will apply the law of conservation of energy. According to the law of conservation of energy, the total energy of a system remains constant in a closed system, provided there are no external forces acting on it. At the top of the first incline (position A), the car has kinetic energy (KE) and potential energy (PE) which can be calculated using the following equations:KE1 + PE1 = KE2 + PE2 + energy lost to friction. At position A, KE1 = (1/2)mv1² = (1/2)(10000 kg)(4 m/s)² = 80000 JPE1 = mgh = (10000 kg)(9.81 m/s²)(40 m) = 3.924 x 10⁶ J (since it's at the top of the first incline)At position C, PE2 = mgh = (10000 kg)(9.81 m/s²)(20 m) = 1.962 x 10⁶ J (since it's at the top of the second incline)KE2 = 1/2 mv² (solve for v)KE1 + PE1 = KE2 + PE2 + energy lost to friction80000 J + 3.924 x 10⁶ J = (1/2)(10000 kg)v² + 1.962 x 10⁶ J + 0 (since no friction is mentioned)v² = (2(3.924 x 10⁶ J - 80000 J))/10000 kgv² = 769.68 m²/s²v = √769.68 m²/s²v = 27.73 m/s. The velocity of the car at position C of the roller coaster is 27.73 m/s.

Know more about velocity, here:

https://brainly.com/question/18084516

#SPJ11

60 90-r 90-i If Zi 45°, calculate Zr for the prism-material with refractive index 1.6. 26° O 9⁰ O 30⁰° O 17° 201

Answers

The value of Zr for the prism-material with a refractive index of 1.6 and Zi = 45° is 17°. The correct option is D.

To calculate Zr, we can use the formula for the angle of refraction:

sin(Zr) = (n2/n1) * sin(Zi)

where Zr is the angle of refraction, n2 is the refractive index of the prism-material, n1 is the refractive index of the incident medium, and Zi is the angle of incidence.

In this case, the refractive index of the prism-material is given as 1.6, and Zi is given as 45°.

Plugging these values into the formula, we have:

sin(Zr) = (1.6/n1) * sin(45°)

To find Zr, we need to know the refractive index of the incident medium (n1). Since it is not provided in the question, we cannot calculate the exact value of Zr.

However, we can determine the possible values of Zr by considering different refractive indices of the incident medium. For example, if we assume the incident medium is air with a refractive index of 1, then the equation becomes:

sin(Zr) = (1.6/1) * sin(45°)

Simplifying further, we find:

sin(Zr) = 1.6 * sin(45°)

Using a calculator, we can solve for Zr:

Zr ≈ 17°

Therefore, the value of Zr for the prism-material with a refractive index of 1.6 and Zi = 45° is approximately 17°. Option D is the correct answer.

To know more about refractive index refer here:

https://brainly.com/question/30761100#

#SPJ11

A U-tube contains some mercury.13.8 cm of water is added to one
side of the U-tube.
Find how high the mercury rises on the other side from its
original level. Use 13.6 g/cm3g/cm3 as the density of mer

Answers

When 13.8 cm of water is added to one side of a U-tube containing mercury with a density of 13.6 g/cm³, the mercury rises by approximately 1.01 cm on the other side to balance the pressure.

To determine how high the mercury rises on the other side of the U-tube when 13.8 cm of water is added, we need to consider the principles of hydrostatics and the relationship between pressure and density in a fluid.

The density of mercury is given as 13.6 g/cm³, which means that it is much denser than water (which has a density of approximately 1 g/cm³). In a U-tube, the pressure at any given point is the same on both sides.

Initially, when there is only mercury in the U-tube, the pressure on both sides of the U-tube is equal. When water is added to one side, the pressure on that side increases.

This increase in pressure causes the mercury to rise on the other side to balance the pressure.

Using the equation for pressure, P = ρgh, where P is the pressure, ρ is the density, g is the acceleration due to gravity, and h is the height of the fluid column, we can set up an equation using the known values.

Initially, the pressure on both sides is the same, so the pressure due to the mercury column is equal to the pressure due to the water column:

ρ₁gh₁ = ρ₂gh₂,

where ρ₁ is the density of mercury, ρ₂ is the density of water, h₁ is the initial height of the mercury column, and h₂ is the height of the water column.

Since we want to find the height of the mercury column on the other side, we can rearrange the equation to solve for h₁:

h₁ = (ρ₂/ρ₁)h₂.

Substituting the given values, we have:

h₁ = (1 g/cm³ / 13.6 g/cm³) * 13.8 cm.

Simplifying the calculation, we find:

h₁ ≈ 1.01 cm.

Therefore, the mercury rises by approximately 1.01 cm on the other side from its original level when 13.8 cm of water is added to one side of the U-tube.

To know more about density refer here:

https://brainly.com/question/30267263#

#SPJ11

Imagine you had a very nice Bitcoin farm with voltage V and R = Ro at room temperature at T-20°C. When you start your farm power will be dissipated, heating the copper and the environment. Say you need 120 kJ to heat your room by 1°C. How long does it take to break the Paris agreement of 1.5°C in your room when your farm is just made out of 3 laptops with 12 on a V = 120V socket? Please enter a numerical answer below. Accepted formats are numbers or "e" based scientific notation e.g. 0.23, -2, 1e6, 5.23e-8 Enter answer here 4.1667 4.1667 s Your Answer

Answers

4.1667 seconds.To calculate the time it takes to break the Paris agreement of 1.5°C in the room due to the power dissipated by the Bitcoin farm, we need to consider the energy dissipated and the energy required to raise the room temperature.

Given that you need 120 kJ (120,000 J) of energy to heat the room by 1°C, we can calculate the total energy required to raise the temperature by 1.5°C as follows:

Energy required = (120,000 J/°C) × 1.5°C = 180,000 J

Now, let's calculate the power dissipated by the farm. If you have 3 laptops with 12 on a 120V socket, the total power dissipated can be calculated as:

Power = Voltage × Current = (120V) × (3 laptops × 12) = 43,200 W

Next, we can calculate the time it takes to dissipate enough energy to raise the temperature by 1.5°C using the formula:

Time = Energy required / Power

Substituting the values, we get:

Time = 180,000 J / 43,200 W ≈ 4.1667 seconds

Therefore, it would take approximately 4.1667 seconds to break the Paris agreement of 1.5°C in the room with the given setup of the Bitcoin farm.

learn more about Bitcoin farm here:

https://brainly.com/question/32337630

#SPJ11

A
71kg swimmer climbs onto a Styrofoam block whose density is
160kg/m^3. If the styrofoam block sinks so that its top surface
aligns with the free surface level of water. What is the block’s
volume?

Answers

The volume of the Styrofoam block is approximately 0.44375 cubic meters.

To calculate the volume of the Styrofoam block, we can use the relationship between density, mass, and volume.

The density of the Styrofoam block is given as 160 kg/m^3. The mass of the swimmer is 71 kg.

Density = Mass / Volume

Rearranging the formula, we can solve for volume:

Volume = Mass / Density

Volume = [tex]71 kg / 160 kg/m^3[/tex]

Volume ≈ [tex]0.44375 m^3[/tex]

Therefore, the volume of the Styrofoam block is approximately 0.44375 cubic meters.

It's worth noting that in this scenario, the Styrofoam block is buoyant in water, allowing the swimmer to float. The block displaces an amount of water equal to its own weight, which balances the weight of the swimmer, resulting in equilibrium.

To know more about Styrofoam refer here:

https://brainly.com/question/30426194#

#SPJ11

what creates a magnetic field? more than one answer may be correct.

Answers

The creation of a magnetic field can be attributed to: moving charges, current-carrying conductors, permanent magnets and changing electric fields.

Moving charges: When electric charges are in motion, they create a magnetic field around them. This phenomenon is described by Ampere's Law and is the basis for electromagnetism.Current-carrying conductors: Electric current flowing through a conductor generates a magnetic field according to the right-hand rule. This principle is utilized in various devices like electromagnets and transformers.Permanent magnets: Certain materials, such as iron, nickel, and cobalt, possess intrinsic magnetic properties. These materials have aligned magnetic domains, resulting in the creation of a magnetic field.Changing electric fields: According to Maxwell's equations, a changing electric field induces a magnetic field. This phenomenon is observed in electromagnetic waves, where oscillating electric and magnetic fields propagate through space.
Therefore, moving charges, current-carrying conductors, permanent magnets, and changing electric fields all contribute to the creation of a magnetic field.

To know more about , magnetic field , click here https://brainly.com/question/30331791

#SPJ11

Following is the complete question: What creates a magnetic field? More than one answer may be correct.a. a stationary conductor carrying electric currentb. a moving object with electric chargec. a difference in electric potentiald. a charged capacitor disconnected from a battery and at reste. a stationary object with electric charge

To practice Problem-Solving Strategy 7.1 Rotational dynamics problems.
Suppose that you are holding a pencil balanced on its point. If you release the pencil and it begins to fall, what will be the angular acceleration when it has an angle of 10.0 degreesfrom the vertical?
Sort the forces as producing a torque of positive, negative, or zero magnitude about the rotational axis identified in Part A. Keep in mind that counterclockwise rotations are positive.

Answers

Problem-Solving Strategy 7.1: Rotational Dynamics Problems Rotational dynamics is the study of rotational motion, which is movement about an axis or a pivot point. We'll look at a few sample problems that illustrate the procedure to approach and resolve rotational dynamics problems in this article. The below diagram depicts the scenario given: At an angle of 10 degrees, the pencil starts to fall. We need to determine the angular acceleration. The given problem does not provide the mass, length or other physical quantities of the pencil. Therefore, we assume that the pencil is a point mass with a negligible size. The torque equation is used to solve rotational motion issues.

It is given as follows: τ = Iα where τ is torque, I is moment of inertia and α is angular acceleration. Let's use this equation to solve the problem. Ignoring air resistance, the only force acting on the pencil is the gravitational force, which acts on the center of mass of the pencil. The gravitational force can be broken down into two components, mgcosθ and mgsinθ, where m is mass, g is acceleration due to gravity, θ is the angle of the pencil with respect to the vertical axis. Let's determine the direction of torque produced by these forces.(i) mgcosθ is acting on the center of mass of the pencil. As it is acting along the vertical line passing through the pivot point, the torque produced is zero.(ii) mgsinθ is acting at a perpendicular distance r from the pivot point.

The direction of torque produced by this force is counterclockwise, hence, positive magnitude. To find the angular acceleration, let's use the torque equation.τ = Iα= F  = mr²α (Moment of inertia of point mass)α = τ / Iα = mgsinθ * r / (mr²)α = gsinθ / r Let's insert the values. g = 9.8 m/s²θ = 10.0°r = length of the pencil = unknown Here, the length of the pencil is unknown. If we take r as the length of the pencil and find the value of angular acceleration, it will be true only for this angle (10.0 degrees) because torque, and hence, angular acceleration, varies with respect to the length of the pencil. It will not be true for other angles. The relationship between the angle and the length of the pencil is given by the trigonometric function sinθ = r / L.α = gsinθ / rα = g / Lα = 9.8 / L radians/s²The angular acceleration is inversely proportional to the length of the pencil. This implies that the shorter the length of the pencil, the greater the angular acceleration and the longer the length of the pencil, the smaller the angular acceleration. Therefore, when we try to balance the pencil for a longer time, we need to use a smaller angular acceleration, so we need to keep the pencil vertical.

To know more about gravitational force visit

https://brainly.com/question/32609171

#SPJ11

Other Questions
Item 11 Part A Estimate the total mass of the Earth's atmosphere, using the known value of atmospheric pressure at sea level. Express your answer to three significant figures and include the appropriate units. ? m = Value Units Submit Request Answer Though necessary, explain why profit does not really tellinvestors about the use of their resources Discuss the relationship between DPO and payables turnover.(Be specific please) Bohemian Manufacturing Company reported sales of $820,000 at the end of last year; but this year, sales are expected to grow by 8%. Bohemianexpects to maintain its current profit margin of 22% and dividend payout ratio of 25%. The firm's total assets equalled $425,000 and were operated at full capacity. Bohemian's balance sheet shows the following current liabilities: accounts payable of $65,000, notes payable of $30,000, and accrued liabilities of $65,000. Based on the AFN (Additional Funds Needed) equation, what is the firm's AFN for the coming year?a. -$116,398 b.-$153,155 c.-$110,272 d.-$122,524 Question 11 1 points Save Answer CASE: Batelco, STC and Zain are the largest internet providers in Bahrain and are known as the "Big Three". These companies always compete and make sure their products, prices, and services are always the same or better than each other. QUESTION: What type of market are those companies involved in? How did religion and the legacies of colonialism affect the formation of new nations in South Asia and the Middle East after World War II? Which of the following is not generally an environmental characteristic of where perennial crops are grown? Abundant light and water sources Low soil nutrient availability Poorly drained soils Limited The major approaches to SEO can be divided into1. Graphic and textual techniques.2. Crawlability and engineering techniques.3. Meta and virtual techniques.4. On-page and off-page techniques.5. None of the above. 50 points for 3 questions. solve and explain please. Suggest THREE strategies a recreational club may use to develop better community spiritExplain why EACH strategy you suggested in (c) (i) can help to develop a bettercommunity Avengers: Infinity War had world-wide box office receipts of $2.05 billion. The movie's production budget was $316 million with additional marketing costs. A successful movie brings pleasure to millions, creates work for thousands, and makes a few people rich. What contribution does a movie like Avengers: Infinity War make to coping with scarcity? When you buy a movie ticket, are you buying a good or service?Avengers: Infinity War makes a contribution to coping with scarcity because it A. provides an enjoyable experience that satisfies a want B. wins an Oscar C. requires expensive sets to be built D. provides actors with a wider job choice evin enjoys eating bagels and scones. the following graph displays one of kevin's indifference curves (i1), which shows his preference for bagels and scones each month. Excel Online Structured Activity: Evaluating risk and returnStock X has a 9.5% expected return, a beta coefficient of 0.8, and a 30% standard deviation of expected returns. Stock Y has a 12.5% expected return, a beta coefficient of 1.2, and a 30.0% standard deviation. The risk-free rate is 6%, and the market risk premium is 5%. The data has been collected in the Microsoft Excel Online file below. Open the spreadsheet and perform the required analysis to answer the questions below.Calculate each stock's coefficient of variation. Round your answers to two decimal places. Do not round intermediate calculations.CVx =CVy =Which stock is riskier for a diversified investor?For diversified investors the relevant risk is measured by beta. Therefore, the stock with the higher beta is more risky. Stock Y has the higher beta so it is more risky than Stock X.For diversified investors the relevant risk is measured by standard deviation of expected returns. Therefore, the stock with the higher standard deviation of expected returns is more risky. Stock X has the higher standard deviation so it is more risky than Stock Y.For diversified investors the relevant risk is measured by beta. Therefore, the stock with the lower beta is more risky. Stock X has the lower beta so it is more risky than Stock Y.For diversified investors the relevant risk is measured by standard deviation of expected returns. Therefore, the stock with the lower standard deviation of expected returns is more risky. Stock Y has the lower standard deviation so it is more risky than Stock X.For diversified investors the relevant risk is measured by beta. Therefore, the stock with the higher beta is less risky. Stock Y has the higher beta so it is less risky than Stock X.Calculate each stock's required rate of return. Round your answers to two decimal places.rx =ry =On the basis of the two stocks' expected and required returns, which stock would be more attractive to a diversified investor? Stock X or Stock YCalculate the required return of a portfolio that has $7,000 invested in Stock X and $6,000 invested in Stock Y. Do not round intermediate calculations. Round your answer to two decimal places.If the market risk premium increased to 6%, which of the two stocks would have the larger increase in its required return? Stock X or Stock YExpected return of Stock X9.50%Beta coefficient of Stock X0.80Standard deviation of Stock X returns30.00%Expected return of Stock Y12.50%Beta coefficient of Stock Y1.20Standard deviation of Stock Y returns30.00%Risk-free rate (rRF)6.00%Market risk premium (RPM)5.00%Dollars of Stock X in portfolio$7,000.00Dollars of Stock Y in portfolio$6,000.00FormulasCoefficient of Variation for Stock X#N/ACoefficient of Variation for Stock Y#N/ARiskier stock to a diviersified investor#N/ARequired return for Stock X#N/ARequired return for Stock Y#N/AStock more attractive to a diversified investor#N/ARequired return of portfolio containingStocks X and Y in amounts above#N/ANew market risk premium6.00%With new market risk premium, stock with larger increase in required return#N/ACheck:New required return, Stock X#N/AChange in required return, Stock X#N/ANew required return, Stock Y#N/AChange in required return, Stock Y#N/AStock with greater change in required return#N/A In what manner did Buddhism spread to the oasis cities of Central Asia?a. It was voluntary, reaching these locations through trade.b. Buddhist traders created the first cities in this region, naturally bringing their religion with them.c. Rulers, eager to trade with Buddhists, forced their subjects to adopt the new religion.d. Buddhist missionaries carried their religion to the region. Whatare the definitions ofTMTSMTDM,and the relation ofTMTSMTDM in Intelligent Transportation Systems?(20) 13. A class has 10 students of which 4 are male and 6 are female. If 3 students are chosen at random from the class, find the probability of selecting 2 females using binomial approximation. a) 0.288 A key benefit of a corporation over a partnership is its LimitedLiability for Owners and ManagersGroup of answer choicesTrueFalse One carat is equivalent to a mass of 0.200 g. Use the fact that 1 kg (1000 g) has a weight of 2.205 lb under certain conditions, and determine the weight of a 1876 carat diamond in pounds (lb). Number why do you think the 1920s were characterized by new inventions and technologies? check all of the boxes that apply. americans returned to the workforce after world war i, strengthening the economy. web marketers launch link-building campaigns to improve their brand image. true or false?