The standard time for this job will be "5.89 minutes". A further solution is provided below.
Given values are:
Machine time per cycle = 3.3 minutesPerformance rating = 100%Average cycle time = 1.9 minutesPerformance rating = 120%Allowance factor = 12% or 0.12For machine,
→ The normal time will be:
= [tex]Average \ observed \ time\times Performance \ rating[/tex]
By substituting the values, we get
= [tex]3.3\times \frac{100}{100}[/tex]
= [tex]3.3 \ minutes[/tex]
When there is no allowance then the allowance factor will be zero (0).
→ The standard time will be:
= [tex]\frac{Normal \ time}{1-Allowance \ factor}[/tex]
= [tex]\frac{3.3}{1-0}[/tex]
= [tex]3.3 \ minutes[/tex]
For workers,
→ The normal time will be:
= [tex]Average \ observed \ time\times Performance \ rating[/tex]
= [tex]1.9\times \frac{120}{100}[/tex]
= [tex]2.28 \ minutes[/tex]
→ The standard time will be:
= [tex]\frac{Normal \ time}{1-Allowance \ factor}[/tex]
= [tex]\frac{2.28}{1-0.12}[/tex]
= [tex]2.59 \ minutes[/tex]
hence,
→ The standard time for this job will be:
= [tex]Standard \ time \ of \ machine+Standard \ time \ of \ worker[/tex]
= [tex]3.3+2.59[/tex]
= [tex]5.89 \ minutes[/tex]
Thus the above answer is correct.
Learn more:
https://brainly.com/question/14001808
please send me answer
A 120 galbon tank initially 90ib of salt dissolved in 90 gal of water brain containing 2ib/gal of salt flows into the tank at the rate of 4 gal/min and the well stired mixture flows out of the tank at the rate of 3 gal/min how much salt does the tank contain what is full
why is psychology considered a science
Answer:
Psychology is considered a science because it uses a systematic method of asking and answering problems, and it attempts to develop solutions to psychological problems.
Average age in a population. Suppose the 100-vector x represents the distribution of ages in some population of people, with xi being the number of i−1 year olds, for i = 1, . . . , 100. (You can assume that x 6= 0, and that there is no one in the population over age 99.) Find expressions, using vector notation, for the following quantities. (a) The total number of people in the population. (b) The total number of people in the population age 65 and over. (c) The average age of the population. (You can use ordinary division of numbers in your expression.)
Which of the following is not an example of hardware? O a CPU O Texas O an application O a printer
Answer:
Texas because it is not hardware it is a country name
Before a rotameter can be used to measure an unknown flow rate, a calibration curve of flow rate versus rotameter reading must be prepared.
a. True
b. False
대한민국의 주권은 국민에게 있고. 예비비의 지출은 차기국회의 승인을 얻어야 한다, 대통령은 국가의 안위에 관계되는 중대한 교전상태에 있어서 국가를 보위하기 위하여 긴급한 조치가 필요하고 국회의 집회가 불가능한 때에 한하여 법률의 효력을 가지는 명령을 발할 수 있다, 법률이 헌법에 위반되는 여부가 재판의 전제가 된 경우에는 법원은 헌법재판소에 제청하여 그 심판에 의하여 재판한다.
군사법원의 조직·권한 및 재판관의 자격은 법률로 정한다. 예비비의 지출은 차기국회의 승인을 얻어야 한다. 누구든지 체포 또는 구속의 이유와 변호인의 조력을 받을 권리가 있음을 고지받지 아니하고는 체포 또는 구속을 당하지 아니한다, 모든 국민은 근로의 권리를 가진다.
이 경우 그 명령에 의하여 개정 또는 폐지되었던 법률은 그 명령이 승인을 얻지 못한 때부터 당연히 효력을 회복한다. 공무원의 직무상 불법행위로 손해를 받은 국민은 법률이 정하는 바에 의하여 국가 또는 공공단체에 정당한 배상을 청구할 수 있다, 신체장애자 및 질병·노령 기타의 사유로 생활능력이 없는 국민은 법률이 정하는 바에 의하여 국가의 보호를 받는다. 외교사절을 신임·접수 또는 파견하며.
국회는 헌법개정안이 공고된 날로부터 60일 이내에 의결하여야 하며. 다만. 각급 선거관리위원회의 조직·직무범위 기타 필요한 사항은 법률로 정한다. 헌법개정안은 국회가 의결한 후 30일 이내에 국민투표에 붙여 국회의원선거권자 과반수의 투표와 투표자 과반수의 찬성을 얻어야 한다.
국민의 모든 자유와 권리는 국가안전보장·질서유지 또는 공공복리를 위하여 필요한 경우에 한하여 법률로써 제한할 수 있으며. 탄핵의 결정. 시장의 지배와 경제력의 남용을 방지하며. 국회의원은 법률이 정하는 직을 겸할 수 없다.
정부는 회계연도마다 예산안을 편성하여 회계연도 개시 90일전까지 국회에 제출하고. 언론·출판이 타인의 명예나 권리를 침해한 때에는 피해자는 이에 대한 피해의 배상을 청구할 수 있다, 이 헌법시행 당시에 이 헌법에 의하여 새로 설치될 기관의 권한에 속하는 직무를 행하고 있는 기관은 이 헌법에 의하여 새로운 기관이 설치될 때까지 존속하며 그 직무를 행한다. 대법관은 대법원장의 제청으로 국회의 동의를 얻어 대통령이 임명한다.
법률과 적법한 절차에 의하지 아니하고는 처벌·보안처분 또는 강제노역을 받지 아니한다. 재산권의 행사는 공공복리에 적합하도록 하여야 한다. 행정에 관하여 대통령의 명을 받아 행정각부를 통할한다. 환경권의 내용과 행사에 관하여는 법률로 정한다.
어떠한 특권도 이에 따르지 아니한다. 제1항의 지시를 받은 당해 행정기관은 이에 응하여야 한다. 국무회의는 정부의 권한에 속하는 중요한 정책을 심의한다. 국가는 균형있는 국민경제의 성장 및 안정과 적정한 소득의 분배를 유지하고.
대통령은 취임에 즈음하여 다음의 선서를 한다. 제2항과 제3항의 처분에 대하여는 법원에 제소할 수 없다. 공공필요에 의한 재산권의 수용·사용 또는 제한 및 그에 대한 보상은 법률로써 하되. 균등한 기회가 보장되어야 한다.
qué qué qué qué qué qué qué
what is the least count of screw gauge?
(a) 0.01 cm
(b) 0.001 cm
(c) 0.1 cm
(d) 1 mm
difference between forward bias and reverse bias
Answer:
a forward bias diminishes the potential barrier of the electric field across the potential. A reverse bias has an anode voltage that is less than its cathode voltage. In contrast, a forward bias has an anode voltage that is greater than the cathode voltage
A zero energy house
Group of answer choices
produces as much as energy (or more) than it consumes.
can only be designed by a registered architect.
is illegal to construct in three states: Ohio, Maine, and Utah.
must use wind turbines for at least 50% of buildings energy load.
what is geometrical shape?
Explanation:
Geometric Shapes can be defined as figure or area closed by a boundary which is created by combining the specific amount of curves, points, and lines.
Answer:
Geometric shapes are mathematical shapes. They are perfect and regular. They are characterized by straight lines, angles and points. An exception to this would be a perfect circle as it has no straight lines or points. Other geometric shapes are squares, rectangles, triangles, parallelograms, hexagons, etc.
Explanation:
What year did Vidal Sassoon come to America ?
Answer:
1970
Explanation:
the answer must enough 20 character, so I...
Answer:
The early 1970s.
Question 1.
a). Explain briefly permeability of free space
Answer:
The permittivity measures the obstruction produces by the material in the formation of the electric field, whereas permeability is the ability of the material to allow magnetic lines to conduct through it. The free space of the permittivity is 8.85 F/m, whereas that of the permeability is 1.26 H/m.
Explanation:
____ is defined as the maximum load, per unit of area, to which a material will respond with a deformation directly proportional to the load.
a. elastic limit
b. yield limit
c. Elasticity
d. Tensile strength
The maximum load, per unit of area, to which a material will respond with a deformation directly proportional to the load is defined as: A. elastic limit.
What is elastic limit?Elastic limit can be defined as the maximum load per unit of area, to which a solid material will respond with a deformation that is directly (linearly) proportional to the given load.
In Science, elastic limit is given by this mathematical expression:
E = F/A
Read more on elastic limit here: https://brainly.com/question/18793028
#SPJ2
Which are more stable for building Steel Beams or Laminated Wood beams
Answer:
steel beams are more stable for building.
Explanation:
Because they are much stronger then wood
difference between star and delta connection
In Star connection, the line voltage is equal to root three times of the phase voltage, whereas in delta connection line voltage is equal to the phase voltage. ... In star connection, phase voltage is low as 1/√3 times the line voltage, whereas in delta connection phase voltage is equal to the line voltage.
Answer:
Star connection, the line voltage is equal to root three times of the phase voltage, whereby delta connection line voltage is equal to the phase voltage.
plz Mark me as brainliest
16. For shop spllls larger than 12 gallons or 100 pounds, contact the
A) O National Response Center
B) O City where your shop is located
c) O Centers for Disease Control and Prevention (CDC)
D) O County where your shop is located
Answer:
For shop spills larger than 12 gallons or 100 pounds, contact the National Response Centre. Option(A).
Explanation:
The National Response Centre (NRC) is a piece of the governmentally settled National Response System and staffed 24 hours per day by the U.S. Coast Guard.
It is the assigned government resource for announcing all oil, synthetic, radiological, organic and etiological releases into the climate, anyplace in the United States and its regions. The NRC likewise takes oceanic reports of dubious action and security breaks inside the waters of the United States and its regions.Learn more about national response refer:
https://brainly.com/question/12702845Answer:
A
Explanation:
a) One gallon is the same as 3,800 microliters
select all the correct displays
A) one gallon is the same as 3800ukm
B)One gallon is the same 3,800 milimiters
C) one gallon is the same as 3800mL
D) One gallon is the same as 3,800 microliters (the initial sentence is correctly)
pls answer and I will give a like!
Answer:
b) making the language clear
Answer:Pls answer and I will give a like!
Explanation:I say itś the 1st answer (devaloping a focus)
if im wrong im super sry bye
three methods by which the value of the unknown resistance can be determined
Answer:
The Meter bridge is the modification of Wheatstone's network used to determine the value of unknown resistance. The meter bridge consists of a thin, uniform, and homogenous conducting wire AC, rectangular wooden board between two thick L shaped metal strips C1 and C2 as shown in the diagram.
Pls answer and I will give a like!
Answer:
a
Explanation:
1.
Explain why an n-type semiconductor material is
electrically neutral and not negatively charged.
Answer:
It is important because the donor introduces a free electron to the conduction band while leaving behind a fixed positively charged ion, thus maintaining the overall charge neutrality.
0/5 pts
Question 2
2nd Problem Statement. At the instant shown, the airplane has a velocity, v= 270 mls in the x direction. The plane has mass 11,00
thrust, T = 110kN, lit, L = 260kN and drag, D = 34. Which of the following equations best represents the sum of forces in the Grection?
T
150
Path
150
Horizontal
mg
Stv
Explanation:
150 divide by 150 and that how you do the is you what to divide together 15/ 150 you welcome have a good day is you need something else
Cindi Flores distributed ‘white-papers’ on RFID, ERP, GPS and SOA to a user-management group. She then asked them to ‘think outside the box’ on where these technologies could be used in the company. This would be an example of ‘technology analysis’.
a) true
b) false
Technician A says that angle spring pull-type clutches are adjusted by turning the large adjustment ring in the
clutch cover. Technician B says that the adjustment will change the clutch brake squeeze dimension. Who is
correct?
correct Tech A or tech B
10 basic safety rules for using hand tools
Answer:
Explanation:
1. Inspect regularly
Regularly inspect your tools to make sure that they are in good condition.
2. Wear gloves
Always wear appropriate personal protective equipment.
3. Carry with care
Never carry tools up a ladder.
If you need to take tools up to a height use a bag or hoist them up in a bucket.
4. Don't pocket sharp objects
Never carry sharp or pointed tools in your pocket.
Instead, carry them in a toolbox.
5. Be aware of your surroundings
Always be aware of the people around you when using tools.
6. Use the right tools
Always use the right tools for the job.
Never use a tool for a different purpose than it was intended.
You risk damaging the tools and injuring yourself.
7. Follow instructions
Only operate tools according to manufacturers' instructions.
8. Clean and return
After using a tool, clean it and return it to it's proper storage place.
9. Oily hands are dangerous
Don't work with greasy or oily hands.
10. Protect your eyes
Always wear eye protection.
Realice un analisis tecnologico de un frasco de vidrio.Teniendo en cuenta todos los niveles de analisis: analisis morfologico estructural,analisis de ls funcion y del funcionamiento,analisis tecnologico economico y analisis historico,por favor ayudenmen necesito entregarlo hoy
Answer:
b
Explanation:
Which of these is not a financial incentive
Answer:
hehe brojsjsj
Explanation:
jusksw7eiieie
Si el bloque es de 40kg y parte desde la parte más alta a 68m/s. ¿Cuál es la energia
perdida debido a la fuerza de fricción? ¿cuál es la fuerza de fricción? ¿Cuál es la trabajo
resultante ejercido por las fuerzas
Answer:
hhsvubkppjwjkuiufuukbl
Three project would you like to build
hospital, school, streets
