The earth's orbital angular velocity around the Sun is 0.986° per day, and its axial angular velocity is 15.041° per hour.
Calculation:
The speeds, not the velocities, are what we require in this case, therefore that is how I will approach it.
Regular speed is calculated by dividing the distance traveled by the travel time.
So, speed = [tex]\frac{distance -travelled}{time}[/tex]
The angular velocity is essentially the same.
Hence, it's divided by the amount of time it took to turn the angle.
(a) Calculation of Earth's orbit around the Sun :
The Earth orbits the Sun in a circle that is 2 radians in diameter (360 degrees). It also takes a year, as we are aware (approx 365 days)
360°/365.25636 days = 0.986°/day ≈ 1° per day
(b) Next, we have to calculate Earth's angular velocity on its axis:
determining the Earth's angular velocity as it fulfills a complete revolution on its axis (a solar day)-
This one requires more precision because a day does not always have 24 hours. Depending on how we define a day,If the day is defined as the time between the Sun's highest and lowest points in the sky, a year's worth of data equals an average of 24 hours.If we define a day as the duration of time it requires for a planet to get to the same location in the sky the following night, then it is 23 hours 56 minutes 4.09 seconds.According to this, the angular speed of rotation = 360°/ 23h 56min 4.09s = 15.041° / hour.
Learn more about angular velocity here:
https://brainly.com/question/13649539
#SPJ1
4 Four objects are stiuated along the y axis as follow: a 20 kg object is at +3 m, a 3 kg object is at +2.5 m, a 2.5 kg object is at origin, and a 4 kg object is at -5 m. What is the center of mass of these objects?
Answer: 1.348 meters
Explanation: Although the sign is missing from the location of the 4.00 kg object, it is assumed to be positive. The net moment of all the objects about the center of mass must be zero. Let the center of mass be on the y axis at a point c . Adding the four moments together, we get:
(2.00)(3.00−c)+(3.00)(2.50−c)+(2.50)(0−c)+(4.00)(0.500−c)=0
6.00−2.00c+7.50−3.00c+0−2.50c+2.00−4.00c=0
11.5c=15.50
c= 1.348 metres
The center of mass is on the y axis at y = 1.348 metres.
4. A hemispherical surface (half of a spherical surface) of radius R is located in a uniform electric field of magnitude E that is parallel to the axis of the hemisphere. What is the magnitude of the electric flux through the hemisphere surface? how to draw the question?
It is to be noted that the magnitude of the electric flux through the hemisphere surface is πR²E. (Option D)
What is an Electric Flux?
The characteristic of an electric field known as electric flux may be thought of as the quantity of electric lines of force (or electric field lines) that cross a certain region.
According to this theory, electric field lines begin with positive electric charges and end with negative charges.
What is the calculation for the above?
Recall that the A hemispherical surface (half of a spherical surface) of radius R.
In order to derive the Magnitude of the electric flux we use the following formula:
Ф = ∈ x Area of the Curve Surface
⇒ Ф = ∈ x πR²
⇒ Ф = πR²∈
Thus, option D is the correct answer.
Learn more about Electric Flux:
https://brainly.com/question/14372859
#SPJ1
Full Question:
A hemispherical surface (half of a spherical surface) of radius R is located in a uniform electric field of magnitude E that is parallel to the axis of the hemisphere. What is the magnitude of the electric flux through the hemisphere surface?
A) 2πR²∈
B) 0
C) 4 πR²∈/3
D) πR²∈
Respond to the following prompts in your initial post:
1. Is Felisha's argument sound or unsound? Use the concepts discussed in your textbook: a valid
structure, true premises, and a sound or unsound argument.
2. Using the fallacies discussed in chapter 11 of your book, identify one fallacy (by name) in
Felisha's argument and explain why this fallacy is an illogical way to argue her conclusion.
3. Describe a time when you successfully argued a point of view and explain why you believe
you were successful.
Based on the textbook, Felisha's argument is known to be unsound because not all the premises that were given was true.
2. She stated that the “The Cowboys are popular and using only their huge fan base to tell is not right and if they are are better as she claim, why are they not the best but she stated that they are among the best.
3. A time when when i successfully argued a point of view was during my high school debate on the topic that doctors are better than lawyers and i gave a lot of valid reasons why the world cannot do without doctors.
What is fallacies and its types?The term fallacies are seen as flawed or deceptive and false kind of arguments that is known to be be proven wrong with the aid of reasoning.
Note that there are two key types of fallacies which are the formal fallacy and an informal fallacy.
Therefore, Based on the textbook, Felisha's argument is seen as an unsound argument because not all the premises that were given was true and they were not standard enough.
Learn more about fallacies from
https://brainly.com/question/20939336
#SPJ1
An object with a mass of m = 122 kg is suspended by a rope from the end of a uniform boom with a mass of M = 74.9 kg and a length of l = 8.77 m. The end of the boom is supported by another rope which is horizontal and attached to the wall as shown in the figure.
Calculate the tension in the horizontal rope. (The horizontal and the vertical ropes are not connected to each other. They are both independently attached to the end of the boom.)
The the tension in the horizontal rope is 7,019.4 N.
What is tension?
Tension is described as the pulling force transmitted axially by the means of a string, a cable, chain, or similar object, or by each end of a rod.
Tension can also be described as the action-reaction pair of forces acting at each end of said elements.
The unit of tension is Newton (same unit as force, since tension is also a force).
Tension in the horizontal ropeThe tension in the horizontal rope is calculated as follows;
Apply the principle of torque;
T(L/2) cosθ = Mg (L/2) sinθ + mg L sinθ
T = (M + 2m)g sinθ/cosθ
T = (M + 2m)g tanθ
let θ = 66⁰ (this value should be given in the question)
T = (M + 2m)g tanθ
T = (74.9 + 2 x 122)(9.8)(tan 66)
T = 7,019.4 N
Thus, the the tension in the horizontal rope is 7,019.4 N.
Learn more about tension here: https://brainly.com/question/918617
#SPJ1
a dog runs back and forth between its two owners, who are walking toward one another. the dog starts running when the owners are 10 m apart. if the dog runs with a speed of 3 m/s and the owners each walk with a speed of 1.3 m/s how far has the dog traveled when the owners meet
Answer:
11.54 meters
Explanation:
The owners take 10m / (1.3 + 1.3 m/s) = 3.85 seconds to meet
The dog is running at constant speed of 3 m/s for these 3.85 seconds
3 m/s * 3.85 sec = 11.54 meters
i. Which of the following formula gives definition of relative density? d d B. A. C. d water at 4°C d d mercury at 4°C D. d water at 40°C d d alcohol at 4°C
Answer:
water at 4°c that's abnormal stage of water
A sensor that generates voltages in the range of -2V..+2V for 0..400kg weight values Design a balance circuit with LCD display. ; fosc=4MHz
A jet of water squirts out horizontally from a hole near the bottom of the tank, as seen in the figure.
If the hole has a diameter of 3.13 mm, what is the height, h, of the water level in the tank? Assume that x = 1.33 m and y = 1.72 m.
The height of the water level in the water tank is 0.011 m.
What is the time taken by a fluid particle to reach the ground?From Newtown's equation of motion, y=U×t+(1/2)gt²As, initial velocity (U) is zero, t= 2y/gt = (2× 1.72)/9.8 = 0.35 s
What's the velocity along x direction?Velocity along x direction= x × t
= 1.33 × 0.35
= 0.46 m/s
What's the height of water level in the tank?As per Bernoulli's theorem, 1/2 × ρ × v² = ρ × g× h
=> h = v²/2g = 0.46²/(2×9.8)
= 0.011 m
Thus, we can conclude that the height of water level is 0.011m.
Learn more about the Bernoulli's theorem here:
brainly.com/question/18724307
#SPJ1
In transverse waves, there is no _________ motion.
A. Perpendicular
B. Vertical
C. Horizontal
D. Up and down
In a transverse wave, the disturbance are carried forward and the particles are undergoing to and fro motion. Hence in transverse waves, there is no horizontal motion.
A wave can be described as a disturbance that travels through a medium from one location to the other location without transporting any matter.
There are two types of matter,
(i) Transverse wave
(ii) Longitudinal wave
In a transverse wave, the particles of the medium move in a direction perpendicular to the direction of propagation of the wave. That means, the particles undergo to and fro motion about their mean position and moves in the direction of the wave propagation.
Examples are:
Radio wavesLight wavesWater waves when a stone is dropped in the pondWhereas longitudinal waves undergo back and forth motion with respect to the mean position.
To learn more about waves: https://brainly.com/question/15663649
#SPJ1
A 100 N force pulls a box but it doesn’t move. How much work is done?
A. 0 J
B. 100 J
C. 50 J
D. Not enough info
Answer:
A
Explanation:
Work = force * distance
= 100 n * 0 = 0 work done
A transverse mechanical wave is traveling along a string lying along the x-axis. The displacement of the string as a function of position and time, y(x,t), is described by the following equation:
[tex]y(x,t)=0.0480[/tex]×[tex]sin(5.40x-128t)[/tex]
where x and y are in meters and the time is in seconds.
1. What is the wavelength of the wave?
2. What is the velocity of the wave? (Define positive velocity along the positive x-axis.)
3. What is the maximum speed in the y-direction of any piece of the string? (Give a positive answer for speed.)
The wavelength of the wave is 1.16m and the velocity is 23.64m/s.
To find the answer, we have to know more about the Transverse waves.
How to find different parameters of a wave?The displacement of the string as a function of position and time, y(x,t), when the wave traveling along a string lying along the x-axis is given as,[tex]y(x,t)=0.048sin(5.40x-128t)[/tex]
Comparing this with the general form of wave equation, we get,[tex]amplitude, a=0.048m\\wave vector, k=5.40\\angular frequency,w=128Hz[/tex]
We have to find the wavelength of the wave, for this, we have the expression as,[tex]k=\frac{2\pi }{wavelength} \\\\wavelength=\frac{2\pi }{k} =\frac{2*3.14}{5.40} \\\\wavelength=1.16m[/tex]
We have to find the velocity of the wave,[tex]v=frequency*wavelength\\2\pi f=w, thus,\\f=\frac{w}{2\pi } =\frac{128}{2*3.14}=20.38s^{-1}\\\\v=1.16*20.38=23.64m/s[/tex]
Thus, we can conclude that, the wavelength of the wave is 1.16m and the velocity is 23.64m/s
Learn more about the transvers waves here:
https://brainly.com/question/25746208
#SPJ1
what is elecric field line
A vector field and a starting position inside the field define the locus as a "field line." We have electric field lines for the electric fields.
What do you mean by electric field line?In general, an electric field line is a curve drawn with each point's tangent pointing in the direction of that point's net field. An arrow on the curve is obviously required to designate the direction of the electric field from the two potential directions provided by a tangent to the curve. A field line is a space curve or a three-dimensional curve.The vector gets shorter as you move away from the origin and always points radially outward because the electric field varies as the inverse of the square of the distance that points from the charge.The density of the lines indicates the size of the field. This indicates that the location with a high density of field lines has a stronger electric field due to the charged substance. The electric field is weaker in the area where the density of these lines is low.The electric field can be depicted by joining these vectors to form a line.The direction of an imaginary line called an electric field line at any place must match the direction of the field there.In general, a field line is a curve drawn so that each point's tangent points in the direction of the net field.To learn more about the electric field, refer to:
https://brainly.com/question/14372859
#SPJ9
Three professional wrestlers are fighting over a champion’s belt, and each exerts a force on the belt. Wrestler 1 exerts a force F1=40.0 N in the +x-direction, wrestler 2 exerts a force F2=80.0 N in the negative y-direction, and wrestler 3 exerts a force F3=60.0 N at an angle of 36.9° counterclockwise (anticlockwise) from the +x-direction.
The resultant force of the three professional wrestlers on the championship belt is 98.35 N.
Component of the forces in x - direction
The component of the forces in x -direction is calculated as follows;
Fx = 40 N + 60(cos 36.9)
Fx = 40 N + 47.98 N
Fx = 87.98 N
Component of the forces in y - directionThe component of the forces in y -direction is calculated as follows;
Fy = -80 N + 60(sin 36.9)
Fy = -43.95 N
Resultant forceR = √Fx² + Fy²
R = √( 87.98² + 43.95²)
R = 98.35 N
Thus, the resultant force of the three professional wrestlers on the championship belt is 98.35 N.
Learn more about resultant force here: https://brainly.com/question/25239010
#SPJ1
In traveling to the Moon, astronauts aboard the Apollo spacecraft put spacecraft into a slow rotation to distribute the Sun's energy evenly (so one side would not become too hot). At the start of their trip, they accelerated from no rotation to 1.0 revolution every minute during a 12-min time interval. Think of the spacecraft as a cylinder with a diameter of 8.5 m rotating about its cylindrical axis.
a)Determine the angular acceleration of the ship.
Express your answer using two significant figures.
b)Determine the radial component of the linear acceleration of a point on the skin of the ship 9.5 min after it started this acceleration.
Express your answer to two significant figures and include the appropriate units.
c)Determine the tangential component of the linear acceleration of a point on the skin of the ship 9.5 min after it started this acceleration.
Express your answer to two significant figures and include the appropriate units.
The angular acceleration is 4.44*[tex]10^{-5} rev/s^{2}[/tex] , radial component is 0.016 m/[tex]s^{2}[/tex], tangential component is 0.9347*[tex]10^{-5} m/s^{2}[/tex].
Angular acceleration,
ω=1/60=0.016 rev/s
[tex]\alpha[/tex]=0.016/(6*60)=4.44*[tex]10^{-5} rev/s^{2}[/tex]
The angular acceleration is 4.44*[tex]10^{-5} rev/s^{2}[/tex]
Radial component of the linear acceleration=[tex]\alpha_{r}[/tex]
v=ωr=0.016*4.75=0.076 m/s
[tex]\alpha_{r}[/tex]=0.076 /4.75=0.016 m/[tex]s^{2}[/tex]
The tangential component = [tex]\alpha_{t}[/tex]=4.44*[tex]10^{-5} rev/s^{2}[/tex]/4.75=0.9347*[tex]10^{-5} m/s^{2}[/tex]
Angular accelerationThe temporal rate at which angular velocity changes is known as angular acceleration. Due to the fact that there are two different types of angular velocity—spin angular velocity and orbital angular velocity—there are also two different types of angular acceleration, referred to as spin angular acceleration and orbital angular acceleration, respectively. The terms "orbital angular acceleration" and "spin angular acceleration" describe the angular acceleration of a point particle about a fixed origin and, respectively, the angular acceleration of a rigid body about its center of rotation.
The unit of measurement for angular acceleration is the angle per unit time squared, or, in SI units, radians per second squared. It is typically denoted by the symbol alpha ().
In traveling to the Moon, astronauts aboard the Apollo spacecraft put spacecraft into a slow rotation to distribute the Sun's energy evenly (so one side would not become too hot). At the start of their trip, they accelerated from no rotation to 1.0 revolution every minute during a 12-min time interval. Think of the spacecraft as a cylinder with a diameter of 8.5 m rotating about its cylindrical axis.
a)Determine the angular acceleration of the ship.
Express your answer using two significant figures.
b)Determine the radial component of the linear acceleration of a point on the skin of the ship 9.5 min after it started this acceleration.
Express your answer to two significant figures and include the appropriate units.
c)Determine the tangential component of the linear acceleration of a point on the skin of the ship 9.5 min after it started this acceleration.
Express your answer to two significant figures and include the appropriate units.
Learn more about Angular acceleration here:
https://brainly.com/question/1592013
#SPJ1
Which of the following is correct concerning the uncontrolled burn phase?
Group of answer choices
The uncontrolled burn phase is characterized by uncontrolled combustion in a cylinder until fuel accumulated during ignition delay is burned.
This is also called the flame propagation phase.
Many points in the combustion chamber will simultaneously reach the threshold values required for ignition, and multiple flame fronts will move through the air-fuel mixture.
(All three statements are correct.)
The option that is the correct one concerning the uncontrolled burn phase is:
The uncontrolled burn phase is characterized by uncontrolled combustion in a cylinder until fuel accumulated during ignition delay is burned.What is uncontrolled combustion?
Uncontrolled Combustion is known to be the the time and place in which a kind of an ignition will stop and it is said to be never fixed by anything in regards to the compression ignition engine as seen in SI engines.
Note that the four Stages of combustion are:
1. Pre-flame combustion
2. Uncontrolled combustion
3. Controlled combustion and
4. After burning
Hence, The uncontrolled burn phase is characterized by uncontrolled combustion in a cylinder until fuel accumulated during ignition delay is burned as all the fuel need to burn out.
Learn more about burn phase from
https://brainly.com/question/14414049
#SPJ1
Drag each tile to the correct location.
Gas cloud 1 is likely to form a star. Gas cloud 2 is not. Based on this information, match the given conditions with each cloud.
Its temperature stays well
below 14 million Kelvin.
its volume shrinks and density
increases due to gravity.
It is spread out, with a greater volume and
lesser concentration of elements.
Its hydrogen atoms retain their electrons.
gas cloud 1
Its temperature surpasses
14 million Kelvin.
Its hydrogen atoms shed their electrons.
gas cloud 2
The most appropriate conditions that matches Gas cloud 1 include the following:
"Its volume shrinks and density increases due to gravity.""Its hydrogen atoms shed their electrons.""Its temperature surpasses 14 million Kelvin."The most appropriate conditions that matches Gas cloud 2 include the following:
"Its hydrogen atoms retain their electrons.""Its temperature stays well below 14 million Kelvin.""It is spread out, with a greater volume and lesser concentration of elements."What is a star?A star can be defined as a giant astronomical object that contains a luminous sphere of plasma and two (2) main hot gases (hydrogen and helium), and it is bounded together by its own gravitational force.
The conditions of a gas cloud.Since Gas cloud 1 is likely to form a star, the most appropriate conditions that matches it include the following:
"Its volume shrinks and density increases due to gravity.""Its hydrogen atoms shed their electrons.""Its temperature surpasses 14 million Kelvin."Since Gas cloud 2 is not likely to form a star, the most appropriate conditions that matches it include the following:
"Its hydrogen atoms retain their electrons.""Its temperature stays well below 14 million Kelvin.""It is spread out, with a greater volume and lesser concentration of elements."Read more on stars here: brainly.com/question/12175185
#SPJ1
is power and voltage the same thing yes or no
The technology in the picture produces which energy conversion?
O A. Light energy to electrical energy
• B. Thermal energy to kinetic energy
C. Chemical energy to kinetic energy
D. Kinetic energy to electrical energy
[tex] \qquad \qquad \bf \huge\star \: \: \large{ \underline{Answer} } \huge \: \: \star[/tex]
Option D[tex]\textsf{ \underline{\underline{Explanation} }:}[/tex]
The given picture shows a dam, and as we know dam ises water current to produce electricity. as the water current has high kinetic energy, so when it hits and rotates the turbine, the generator produces electricity.
Hence, the correct option will be :
❖ D. Kinetic energy to electrical energy
a resistor wire of diameter 0.6cm has a resistivity of 1.0×00000010 ohms m. what length of the wire would be needed to make a 4 ohm resistor
The length of the wire is 1.12m
What is Resistance ?
Resistance is opposition to the current flowing in the circuit.
Given ,
D= 0.6m
R= 0.6/2m
R= 28Ω
rho = 1Ωm
R= rho ×l/A
where R is resistance , l is length ,A is area and rho is resistivity
By applying value and Solving we get,
l= 1.12m
to learn more about Resistance clickhttps://brainly.com/question/24744735
#SPJ9
the apparent weight of a student in alift is 564N . if the mass of the student is 60.3kg, what is the acceleration of the lift ? use negative is the acceleration vector is pointing downwards
Answer:
-.457 m/s^2
Explanation:
Actual weight = 60 .3 (9.81) = 591.54 N
Accel of lift changes this to 60.3 ( 9.81 - L) where L - accel of lift
60.3 ( 9.81 - L ) = 564
solve for L = .457 m/s^2 DOWNWARD
so L = - .457 m/s^2
A cell connected to two bulbs in series lasts longer than a cell connected to the same bulbs in parallel.Explain why?
Because the voltage stays the same while the amps grow, parallel batteries last longer. It will still be a 12 volt system if you connect two 12v 50ah batteries in parallel, but because the amps quadruple to 100ah, the batteries will last longer. Charges are spread among the bulbs in a parallel circuit because they are flowing in several directions over multiple paths. As a result, each bulb will have less charge since the charge is travelling in multiple directions, and the lights will shine less brightly. On the other hand, in a series circuit, there is only one channel and only one location for the charge to travel, meaning that all of the charge is directed at a single lightbulb. As a result, the lightbulb will shine more brilliantly since there is no need to spread the energy. The rule of conservation of energy is not broken because of the difference in power; instead, smaller resistance causes bigger current, which results in brighter lights. The energy traveling from the source to the bulbs remains constant. Because higher power means that more energy in a given time goes quicker from the source to the bulb, brighter lights require more power rather than energy. Because the energy traveling from the source to the bulbs remains constant, the rule of conservation of energy is not being broken; rather, there is merely a difference in power as a result of smaller resistance leading to bigger current, which will result in brighter lights. This means that brighter lights require more power rather than energy since higher power enables more energy to go from the source to the bulb more quickly.
Thank you,
Eddie
how much power is radiated as a sound from a band whose intensity is 1.6x10-3 w/m2 at a distance of 12m
2.89watts.
What is meant by sound intensity?The average rate at which sound energy moves across a unit area normal to a given direction is used to determine a sound's intensity. This rate is generally stated in ergs per second per square centimeter.Decibels are the units used to measure sound intensity, often known as sound power or sound pressure. The decibel (dB) unit is named after Alexander Graham Bell, who also created the audiometer and the telephone. An audiometer is a tool to gauge a person's hearing capacity for various noises.Our ability to measure the flow of sound energy as a time-averaged vector quantity makes sound intensity measuring an effective method. We can identify sound sources and tell direct sound from reverberant sound in a room using the characteristics of sound intensity.How much power is radiated as a sound from a band whose intensity is 1.6x10-3 w/m2 at a distance of 12m:
Formula: [tex]I\frac{P}{4\pi r^{2} }[/tex]
I=1.6x10-3 w/m2
r=12m
[tex]I\frac{P}{4\pi r^{2} }[/tex]
[tex]P=I4\pi r^{2}[/tex]
[tex]=(1.6x10-3\frac{W}{m^{2} } ) (4\pi (12m)^{2} )[/tex]
The power is radiated as a sound from a band whose intensity is 1.6x10-3 w/m2 at a distance of 12m [tex]=2.89watts.[/tex]
To learn more about sound intensity, refer to:
https://brainly.com/question/17062836
#SPJ9
Explain the mechanism by which an open fracture could result in shock.
Answer:
an open fracture contains some sort of water which if it comes in contact with electrons could result to a shock
When a 6kg block is placed on a vertical spring, the spring is compressed by 20cm. How much work is required to compress the spring by an additional 10CM
Answer:
Mass of block = 6kg
wright = 6 × g = 60 N using g = 10 m/s^2 .
compression= 0.20m
spring constant =( weight / compression) =( 60/0.20) = 300 N/m .
Work done in compressing 0.20 m =( 1/2 × 300 × 0.20 × 0.20)= 6 joule.
Additional compression = 0.10 m
total compression = 0.20+ 0.10= 0.30 m.
Total work done = ( 1/2 × 300 × 0.30× 0.30) = 13.5 joule.
Hence work done in compressing from 0.20 m to 0.30 m will be = ( 13.5 - 6) = 7.5 joule.
Note :- work done in compressing a spring having spring constant K N/m by x m is equal to 1/2× (K) × X^ 2 .
A force of 570 N keeps a certain ideal spring stretched at a distance of 0.700 m.
A). What is the potential energy of the spring when it is stretched 0.700 m?
B). What is its potential energy when it is compressed 8.00 cm?
Answer:
399j and 456j
Explanation:
(a)spring energy= force * distance
spring energy=570 * 0.700= 399 joules
(b) convert 8.00 cm to m we have 0.08m
E =f * s
E=570 *0.08= 456j
The potential energy of the spring when it is stretched 0.700 m would be 199.5 Joules, and the potential energy when it is compressed 8.00 cm would be 2.60 Joules.
What is the spring constant?The spring constant is used to define the stiffness of the spring, the greater the value of the spring constant stiffer the spring and it is more difficult to stretch the spring.
The mathematical relation for calculating the spring constant is as follows
F = - Kx
As given in the problem, if a force of 570 N keeps a certain ideal spring stretched at a distance of 0.700 m.
k = 570 / 0.7
k = 814.28 N / m
The potential energy stored in spring when it is stretched 0.700 m
E = 1/2 kx²
=0.5×814.28×0.7²
= 199.5 Joules
The potential energy stored in spring when it is stretched 8 cm
E = 1/2 kx²
=0.5×814.28×0.08²
=2.60 Joules
Thus, the potential energy of the spring when it is stretched 0.700 m would be 199.5 Joules, and the potential energy when it is compressed 8.00 cm would be 2.60 Joules.
Learn more about spring constants here,
brainly.com/question/14670501
#SPJ2
The velocity of a body is given by the equation v= a + bx, where 'x' is displacement. The unit of b is .......
Answer:
s^ -1 ( or 1/sec)
Explanation:
Velocity is given in units of displacement / sec
like feet /sec or m/sec
so b would have units of s^-1
(or perhaps a more general term would be time^-1)
HELP PLS
The minimum frequency for the photoelectric effect of a zinc plate is 9.7 × 10^14 Hz. If a green photon with a wavelength of 532nm strikes the plate, will electrons be emitted? Show your work to support your answer.
yes electrons will be emitted with the kinetic energy of
[tex]30.87 \times 10 { }^{ - 19} j[/tex]
what is photoelectric effect?
In photoelectric effect, the electrically charged particles are released from or within a material when it absorbs electromagnetic radiation.
what is kinetic energy?
It is a form of energy that an object or a particle has by reason of its motion. If work, which transfers energy, is done on an object by applying a net force, the object speeds up and thereby gains kinetic energy.
Given:
wavelength,λ
[tex] = 5.32 \times 10 {}^{ - 8} m[/tex]
Frequency
[tex] = 9.7 \times {10}^{14} [/tex]
Einstein's photoelectric equation
€= w + KE
€ = hc/ λ
[tex] = \frac{6.63 \times {10}^{ - 34} \times 3 \times {10}^{8} } {5.32 \times 10 {}^{ - 8} } [/tex]
[tex]€= 3.73 \times {10}^{ - 18} [/tex]
w=h.f
[tex] = 6.63 \times {10}^{ - 34} \times 9.7 \times {10}^{14} [/tex]
[tex] = 6.43 {10}^{ - 19} j[/tex]
KE = € - W
[tex]37.3 \times {10}^{ - 19} - 6.43 \times {10}^{ - 19} [/tex]
[tex]kE = 30.87 \times {10}^{ - 19} [/tex]
learn more about photoelectric effect from here: https://brainly.com/question/1408276
#SPJ1
Which diagram best represents the relationship between these terms?
Quantum
Mechanics
Uses Solid-
State Physics
Has
Applications
Crystallography
Complete the following:
When light is incident through the focal point, and then strikes a mirror, ___
the light will reflect parallel to the principal axis
the light will reflect back through the focal point
the light will not reflect at all
Answer:
the light will reflect parallel to the principal axis
If a frying pan has a heat capacity of 500.j∘c and it absorbs 25,000 j of heat, what will be the change in temperature in degrees celsius?
Answer:
50° C change
Explanation:
25000 J / (500 J/ °C) = 50 ° C
